Photo To Sketch With More Detail In Photoshop

Written by Steve Patterson. In a previous Photoshop tutorial, we learned how to

convert a photo into a sketch using a technique that works great with portraits, since

it tends to leave out small, unwanted details like wrinkles and other skin blemishes

while focusing more on the general features we want to see in the sketch, like a

person's eyes, nose and lips.

Sometimes though, when working with other types of images like landscape or

nature photos, buildings and architecture, still lifes, or really any image that doesn't

focus on people, you'll want the sketch to include those tiny details the previous

technique would ignore.

In this tutorial, we'll learn a slightly different way to convert a photo to a sketch

that's usually better suited for these other types of images since it often does an

amazing job of bringing out fine details.

If you've already read through the previous Portrait To Sketch tutorial, you'll find

that most of the steps here are the same. It's really just one change in one of the

steps that makes all the difference. So as an added bonus for those already familiar

with the previous tutorial, at the end of this one, we'll learn how to create the entire

sketch effect from beginning to end in 60 seconds or less! As before, I'll be using

Photoshop CS5 throughout this tutorial but any recent version will work. You'll find

the Photoshop Elements version of this tutorial here.

Here's the photo I'll be starting with, which comes to us from the Fotolia image

library:

The original image.

Here's how it will look after being converted to a color sketch:

The final effect.

Let's get started!

Download our tutorials as printable PDFs! Learning Photoshop has never been easier!

Step 1: Duplicate The Background Layer

Let's begin as we usually do with photo effects by making a copy of our original

image. This way, all of the changes we make will be made to the copy, leaving the

original photo unharmed. If we look in the Layers panel, we see our image sitting all

by itself on the Background layer, which is currently the only layer in the document:

The Layers panel showing the photo on the Background layer.

Go up to the Layer menu in the Menu Bar along the top of the screen, choose New,

then choose Layer via Copy. Or, for a faster way to run the same command,

press Ctrl+J (Win) / Command+J (Mac) on your keyboard:

Go to Layer > New > Layer via Copy.

Either way makes a copy of the layer. Photoshop automatically names the copy

"Layer 1" and places is above the Background layer in the Layers panel:

A copy of the image appears above the original.

Step 2: Desaturate The Layer

Go up to the Image menu at the top of the screen, choose Adjustments, then

choose Desaturate:

Go to Image > Adjustments > Desaturate.

The Desaturate command quickly removes all color from the image, leaving it in

black and white:

The image after running the Desaturate command.

Step 3: Duplicate The Layer

Just as we did in Step 1, make a copy of the layer by going up to the Layer menu,

choosing New, then choosingLayer via Copy, or by pressing Ctrl+J (Win)

/ Command+J (Mac) on your keyboard. A copy of Layer 1 appears above the original

in the Layers panel:

Photoshop names the new layer "Layer 1 copy".

Step 4: Invert The Image

Go up to the Image menu, choose Adjustments, then choose Invert:

Go to Image > Adjustments > Invert.

This will invert the brightness values in our black and white image, making light

areas dark and dark areas light:

Inverting a black and white image creates a "photo negative" effect.

Step 5: Change The Layer Blend Mode To Color Dodge

Change the blend mode of the inverted layer from Normal (the default setting)

to Color Dodge. You'll find the blend mode option in the top left of the Layers panel:

Change the layer blend mode from Normal to Color Dodge.

This will temporarily turn the document white:

The document becomes filled with white.

Step 6: Apply The Minimum Filter

Up to this point, the steps have been the same as in the previous tutorial where we

turned a portrait into a sketch. In that tutorial, we used Photoshop's Gaussian Blur

filter to create the sketch effect by blurring the layer. This time, we want more detail

in the sketch than what the Gaussian Blur filter would give us, so we'll use a different

filter. Go up to the Filter menu at the top of the screen, choose Other, then

choose Minimum:

Go to Filter > Other > Minimum.

This opens the Minimum filter dialog box. Leave the Radius value at the bottom of

the dialog box set to 1 pixel, then click OK to close out of it:

The default Radius value of 1 pixel usually works great.

The photo is instantly converted into a sketch with lots of fine detail, much more

than what we could have achieved with the Gaussian Blur filter:

The initial sketch with lots of detail.

Next, we'll darken the sketch lines, colorize it, and learn how to complete the entire

effect in 60 seconds or less!

Step 7: Merge The Layers Onto A New Layer

Hold down your Alt (Win) / Option (Mac) key and, with the key still held down, go

up to the Layer menu and choose Merge Visible:

Hold down Alt (Win) / Option (Mac) and go to Layer > Merge Visible.

This will merge all of the existing layers onto a brand new layer, "Layer 2", above

them:

Holding down Alt / Option (Mac) while choosing Merge Visible keeps the original layers intact.

Step 8: Change The Blend Mode To Multiply And Adjust The

Layer Opacity

Change the blend mode of Layer 2 from Normal to Multiply. This will darken the

lines in the sketch. If you find the sketch is now too dark, lower the

layer's Opacity value, which you'll find to the right of the blend mode option. Keep

an eye on the image in the document window as you lower the opacity to fine-tune

the results. I'll lower mine down to 65%:

Change the blend mode to Multiply, then lower the Opacity value.

Here's my result with the sketch lines now darker:

The sketch now appears darker against the white background.

Step 9: Duplicate The Background Layer

Let's add color to the sketch using the colors from the original image, which is sitting

safely on the Background layer. First, click on the Background layer in the Layers

panel to select it:

Click on the Background layer to select it.

With the Background layer selected, make a copy of it by going up to

the Layer menu, choosing New, then choosing Layer via Copy, or by

pressing Ctrl+J (Win) / Command+J (Mac) on your keyboard. Photoshop duplicates

the layer, names the copy "Background copy" and places it directly above the

original Background layer:

Photoshop always places a copy of a layer directly above the original.

Step 10: Move The Background Copy Above The Other Layers

Press Shift+Ctrl+] (Win) / Shift+Command+] (Mac) to instantly jump the Background

copy layer to the top of the layer stack so it sits above the merged layer (Layer 2).

The original photo will once again appear in the document window:

The Background copy layer jumps above the other layers.

Step 11: Change The Blend Mode To Color And Adjust The Layer

Opacity

Finally, change the blend mode of the Background copy layer from Normal to Color,

which will colorize the sketch. If the color seems too intense, lower the Opacity value

until you're happy with the results. I'll lower my opacity down to 50%:

Change the blend mode to Color and lower the opacity if needed.

Here, after colorizing the sketch, is my final result. I've cropped away some of the

empty background with the Crop Tool:

The final colorized "photo to sketch" effect.