PHONE NO. (01762) 09115005601-10 TELFAX - …PHONE NO. (01762) 09115005601-10 TELFAX - 232669....
Transcript of PHONE NO. (01762) 09115005601-10 TELFAX - …PHONE NO. (01762) 09115005601-10 TELFAX - 232669....
PHONE NO. (01762) 09115005601-10 TELFAX - 232669.
INTRODUCTION
National Small Industries Corp. Ltd.-Technical Services Centre, Rajpura is an ISO 9001: 2008 certified Govt. of India Enterprise under Ministry of MSME, Govt. Of India, is engaged in imparting technical trainings to the unemployed youth from rural & urban areas for their skill up gradation leading to opportunities for their employment/ self employment since 1993. We are a pioneer training centre operating in the region with an objective to extend training of meaningful, employment & self employment oriented & of relevance with the changing industrial/ market requirements. In the recent past, to keep abreast with the changing market need to help enhancing the knowledge of the students and also fulfill the requirement of the industries, NSIC-Technical services Centre, Rajpura has been imparting advance industrial trainings to young engineers by enhancing their technical skill in the stream of Computer Science, Electrical, Mechnical, Electronics & Communication etc.
LOCATION OF NSIC-TECHNICAL SERVICES CENTRE
NSIC- Technical Services Centre, Rajpura is situated in the industrial area called Focal Point, Rajpura at the address D-82/83, Focal Point, Rajpura . The centre has an covered area of 10922 sft. The building is under lease hold from Punjab Govt. for 99 years and the premise is being used for Technical training, Testing and activities for development of Micro , Small and Medium Enterprise. The class rooms and laboratories are well planed and well furnished in covered area ranging from 60 to 120 Sqr. Mtr of floor space.
OUR RECOGNITION/AFFILIATION FOR DEA LABORATORY
NSIC-Technical services Centre, Rajpura has been rendering services to Micro, Small and Medium Enterprises in the country under common facility services for testing of domestic electrical appliances.
The Domestic Electrical Testing Laboratory of NSIC-TSC, Rajpura is recognized by Bureau of Indian Standards (BIS for testing of Domestic Electrical Appliances).
The Domestic Electrical Testing Laboratory of NSIC-TSC, Rajpura holds prestigious accreditation from National Accreditation Board for Testing and Calibration of laboratory (NABL) , department of Science & Technology, Govt. of India in accordance with ISO/IEC 17025.
TRAINING INFRASTRUCTURE
The Centre has sitting arrangement for 400 trainees at a time.
The Centre has 6 no. of theory class rooms and six no. of
Practical Labs.
The Centre has sufficient training infrastructure to conduct
Proposed training courses.
Theory Class rooms and Practical labs are well furnished and
well equipped required to conduct Proposed training courses
The Centre has sufficient training infrastructure to conduct
Proposed training courses.
The Centre has well equipped AC Computer Labs with latest
Computer systems (Approx. 50 no. of computers) , Laser printer,
Scanner, Fax and other latest communication facilities. The
Computer systems have a continuous power supply which is
further ensured by Online UPS and generator.
The Centre has a well stocked library and reading room with
huge number of books, manuals and periodicals on various
subjects for trainees. Approximately 1000 no. of books are
available for study.
Well Furnished air ventilated Classrooms for conducting theory
classes for various courses.
Well Qualified and experienced Staff and faculties
for conducting theory and practical classes.
MAN POWER AT NSIC-TSC, RAJPURA
SR. NAME OF THE PERSONS DESIGNATION QUALIFICATION Total NO Experience
1 SH. RAJESH KUMAR Dy. General B.SC(Engg.), 26 years Manager & PGDMM
Center Head
2 SH. AZIZUL HASAN Chief Manager, BE (Electrical) 26 years (Tech.)
3 SH. MANU AGARWAL Asst. Manager, MA., MMS, DBM, 20 years (Accts) ADCSSA.,O-
LEVEL.
4 SH. RAHUL SAINI DM (Tech.)
B.Tech
(Mech) 8 years
MS. SHUBHANGI Asst. Manager B.E, M.E 5 years 5 (Tech)
6 SH. NAVIN K.K. Asst. Manager BTech (Mech) 3 Years 7 SH.MANU AGGARWAL Asst. Manager M.Com, MBA 8 Years
SH.JOGINDER SINGH Development MSC (Comp. Sci), 21 years Officer(Tech) Hon. Dip in System
Management,
8 O-Level , PGDCA.
SH. P. P. SINGH Development ITI, C.T.I., M.A 21 years
9 Officer (Tech)
SH. KULWANT SINGH Development ITI, C.T.I. 21 years
10 Officer(Tech)
11 MS. SUNITA VERMA Development B.Com 21 years Officer(Tech)
Note : In addition to the full time man power, NTSC, Rajpura also engages/invites professionals , Consultants , Guest faculties and subject experts on need basis for conducting theory & practical classes .
OUR POST TRAINING SUPPORT AND PLACEMENT
ASSISTANCE
TO PASSED OUT TRAINEES
NTSC, Rajpura have a centralized Dept of Post Training Support & Placement Assistance lead by a dynamic team of young professionals. The cell operates with a vision to equip the students with versatile technical traits to match core needs of the corporate world. Campus interview are regularly arranged for leading companies/business houses of the area.
The Campus interview- we conduct, is for a special cause to serve the unemployed youth so that every student gets a placement.
Our Panel of Industries for placement of Passed out Trainees:
Acme Industries Ltd Alcon Industries Elin Appliances
Vitthal Foundary S.N Engineers SGN Electronics Pvt Ltd
Amber Industries Khalsa Metallic Ltd Quality Industries
Standard Charted Bank HDFC Bank Group SEB India Pvt. Ltd
Religare JBR Industries Industrial Engineering
corporation
NPL, Rajpura Fortis Hospitals Bajaj Electricals Ltd
Gian Sagar Hospital Jainson Appliances C.Lal Gopi Industrial
Enterprises
Training Calendar for the year : 2016-17
LONG TERM TRAININGS (INTERNAL)
S. No. Name of the Course Duration Course Fee (Rs.)
Eligibility for Training
Commence ment
Batch Size
1 Computer Operator and Programming Assistant
1 year 12875 10th
pass July/August 52
2 Electrician 2 year 38624 10th
pass With Math & Science Sci.
July/August 21
3 Air Conditioning & Refrigeration 1 Year 13200 8th
pass July/August 20
4 Computerized Fashion Designing
1 Year 13200 8th
pass July/August 20
5 Computerized Accounting & Office Procedure
1Year 13200 10th
pass July/August 20
6 Diploma in Electrician 1Year 13200 8th
pass July/August 20
7 Welder 1 Year 12000 8th
pass July/August 20
8 Advance Diploma in Computer Software, Hardware & Networking
1 year 15000 10th
pass May/July/Sep
20
9 Advance Diploma in Computer Software & Web Designing
1 Year 15000 10th
pass July/August 20
10 Advance Diploma in Electronic Devices
1 Year 15000 10th
pass July/August 20
11 Mobile Repair & Mobile Software 6 Months 10000 8th
pass July/August 20
12 Repair & Maintenance of Electrical Appliances
6 Months 15000 12th
pass July/August 20
SYLLABUS
FOR
COMPUTER OPERTOR AND PROGRAMMING ASSISTANT
Duration : One Year
Time : Full Time (8:30 a.m to 4:30
p.m)
Eligibility : 10 th Pass
Course Fee : Rs. 12875/-
First Semester: Code no. COPA – 01
Duration:6 months ( 26 weeks)
Week No. Trade Practical Trade Theory
Introduction to Computers and
Computer components and Windows
Windows Operating System
History, Generations, Types,
Operating System
Advantages and Applications of
Disassembling, Identification of
Computers.
components and Reassembling a
Concepts of Hardware and
Desktop computer.
Software. Computer Hardware
Familiarization with Windows O.S
basics.
desktop, using icons, buttons and
1-2
Introduction to various processors.
customizing the desktop.
Introduction to the functions of an
Managing files and folders, using
Operating System, Popular
removable drives.
Operating Systems in Use.
Viewing system properties and
Main features of Windows O.S
control panel details. Viewing and
Various Input/ Output devices in
setting environmental variables.
use and their features.
Working with MS Paint.
Using Scanner, Printer and
Webcam.
Computer Hardware basics and Software
Installation Computer Hardware basics and
Viewing the BIOS and changing the Software Installation
Boot order. Introduction to the booting
Identify and rectify common process, BIOS settings and their
3 hardware and software issues. modification.
Formatting the hard disk and loading Introduction to various types of
O.S and necessary application memories and their features.
software. Basic Hardware and software
Installation of DVD, using different issues and their solutions.
types of hard disks. Formatting and Loading O.S and
Bluetooth Configuration, DVD writing Application software and Antivirus.
techniques.
Familiarization with DOS CLI & Linux
Introduction to DOS Command Line
Interface & Linux Operating System.
Operating Systems.
Introduction to basic DOS Internal
Using basic DOS commands for
and External Commands.
directory listing, file and folder
Introduction to Open Source
management etc.
Software.
4-5 Using Basic Linux commands for
Introduction to Linux Operating
directory listing, file and folder
System features, structure, files
management, password etc.
and processes.
Using the Linux graphical user
Introduction to various Linux
interface for file and folder
Shells.
management, exploring the system
Basic Linux commands.
etc.
Using Word Processing Software Word Processing
Familiarization with the Word
Introduction to the various
window components.
applications in office.
Creating, saving and
Introduction to Word features,
Editing documents using Word.
Office button, toolbars.
Inserting and formatting tables and
Creating, saving and formatting
other objects.
6-8
and printing documents using
Using templates, autocorrect tools,
Word.
Macro sand the mail merge tool.
Working with inserting objects,
Working with Page layout settings
macro, mail merge, templates and
and printing documents.
other tools in Word.
Typing practice using open source
Page setup and Printing
typing tutor tools.
Documents using word.
Practice of using shortcut keys.
Spread Sheet Application
Using Spread Sheet Application
Introduction to Excel features and
Creating, Saving and Formatting Data Types.
Excel Spreadsheets. Cell referencing. Use of functions
Using Absolute and Relative of various categories, linking
9-11 referencing, linking sheets, Sheets.
Conditional formatting etc. Introduction to various functions
Using Excel functions of all major in all categories of Excel.
categories. Concepts of Sorting, Filtering and
Using various data types in Excel, Validating Data.
Sorting, filtering and validating Analyzing data using charts, data
data. tables, pivot tables, goal seek and
Creating and formatting charts. scenarios.
Importing &Exporting Excel Data. Introduction to Reporting.
Performing data analysis using
“what if” tools.
Modifying Excel Page setup and
printing.
Simple projects using Excel &
Word.
Image editing, Creating presentations &
Using Open Office
Use of windows and open source
Image editing, Creating presentations
& Using Open Office
image editing software like Open
Office Draw, GIMP, Irfan View or a Introduction to Open Office.
similar tool.
Introduction to the properties and
Creating Slide shows, Inserting
12
editing of images.
objects.
Introduction to Power Point and its
Animating Slide transitions and
advantages.
Objects.
Creating Slide Shows.
Creating a simple presentation
Fine tuning the presentation and
project using Open Office.
good presentation techniques.
Working with Open Office for word
processing and spreadsheet
application.
Database Management Systems
Database Management Concepts of Data, Information and
Creating database and designing a Databases. Overview of popular
simple tables in Access. databases, RDBMS, OODB and
Enforcing Integrity Constraints NOSQL.
and modifying the properties of Rules for designing good tables.
tables and fields. Integrity rules and constraints in a
13-15 Creating Relationships and joining table.
tables. Relationships in tables.
Creating Forms. Introduction to various types of
Creating simple select queries Queries and their uses.
with various criteria and Designing Access Reports and
calculations. Forms.
Creating Simple update, append, Introduction to macros, designer
make table, delete and crosstab objects controls, their properties
queries. and behavior.
Modifying form design with
controls, macros and events.
Importing and exporting data to
and from Access.
Compressing and
Encrypting databases.
Networking Concepts
Introduction to Computer
Configuring and Using Networks
Networks, Necessity and
Advantages.
Viewing Network connections.
Client Server and peer to Peer
Connecting a computer to a
networking concepts.
network and sharing of Devices,
Concept of Proxy Server and proxy
files and Folders.
firewall server.
Familiarization with various
Network topologies. Introduction
Network devices, Connectors and
to LAN, WAN and MAN.
Cables.
Network components, viz.
IP Addressing and Subnet for IPV4 /
Modem, Hub, Switch, Router,
16-17
IPV6,Masking, pinging to test
Bridge, Gateway etc.
networks.
Network Cables, Wireless networks
Configuring Hub and Switch.
and Blue Tooth technology.
Setting up and configuring LAN in a
Concept of ISO - OSI 7 Layer
Computer Lab as peer to peer
Model.
network.
Overview of various Network
Setting up a proxy server/ DHCP
protocols Viz. TCP/IP, FTP, Telnet
Server with firewall.
etc.
Setting up video conferencing.
Logical and Physical Addresses,
Using various tools for computer
Classes of Networks.
maintenance, Network security.
Network Security &firewall
concepts.
Concept of DHCP Server.
Internet Concepts Internet Concepts
Browsing the Internet for information. Introduction to WWW, Concept of
Creating and using e – mail for Internet, Web Browsers, internet
18 communication. servers and search engines.
Communication using text, video Concepts of Domain naming
chatting and social networking sites. Systems and E mail
Identifying various threats to the communication.
system connected to the net. Introduction to video chatting
Protecting the computer against tools, VOIP and Social Networking
various internet threats. concepts.
Configure Outlook, mail service in Concept of Cloud storage and
mobile phones. Using tools like Skype, Open Web Server.
Google+ etc. Introduction to Internet Security,
Threats and attacks, Malicious
Software types, Internet security
products and their advantages.
Designing Static Web Pages Web Design Concepts
Designing simple web pages with Concepts of Static and Dynamic
text, pictures, tables, lists, Web pages.
hyperlinks, frames, marquees etc. Introduction to HTML and various
using HTML tags. tags in HTML.
Designing Web Pages with Forms Creating Forms with controls using
19-21 and Form Controls using HTML HTML.
tags. Concepts of CSS and applying CSS
Creating Web Pages using CSS. to HTML
Using WYSIWYG web design tools Introduction to open source CMS
to design and edit web pages with viz,. Joomla, Word press etc. and
various styles. Web authoring tools viz.
Kompozer, Front Page etc.
22-23 Project Work
24-25 Examinations
26 Admissions for the next session
Second Semester : Code no. COPA – 02
Duration:6 months ( 26 weeks)
Week Trade Practical
Trade Theory
No.
Java Script Java Script
Familiarization with JavaScript Algorithms and flowcharts.
elements. Introduction to Web Servers and their
Embedding JavaScript in HTML to features.
display information in web pages. Introduction to Programming and
Documentation and Formatting. Scripting Languages.
Using JavaScript Variables, Data Introduction to JavaScript and its
types, Constants and Operators. application for the web.
Working with Arrays, Control JavaScript Basics – Data types,
statements and Loops in Variables, Constants .Conversion
JavaScript. between data types.
Writing functions in JavaScript. The Arithmetic, Comparison, Logical
1-7 Working with String, Math and and String Operators in JavaScript.
Date functions in JavaScript. Operator precedence.
Switch, Loops, Breaks and Errors. Arrays in JavaScript – concepts, types
Using Java Script Objects. and usage.
Working with JavaScript Libraries. Program Control Statements and loops
Using simple Open source web in JavaScript.
server (like XAMPP) and FTP Introduction to Functions in JavaScript.
software (For ex. File zilla). Built in JavaScript functions overview.
A simple project using JavaScript. The String data type in JavaScript.
Introduction to String, Math and Date
Functions.
Concepts of Pop Up boxes in JavaScript.
Introduction to the Document Object
Model.
Programming with VBA Introduction to VBA, Features and
Familiarization with the VBA Applications.
Editor. Introduction to VBA features and
8– 15 Writing simple programs involving applications.
VBA Data types, Variables, VBA Data types, Variables and
Operators and Constants. Constants.
Working with string variables in Operators in VBA and operator
VBA. precedence.
Creating and Manipulating Arrays Mathematical Expressions in VBA.
in VBA. Introduction to Strings in VBA.
Writing programs involving Introduction to Arrays in VBA.
Mathematical, Conversion, Date Conditional processing in VBA, using
And String Functions in VBA. the IF, Else if, Select… Case
Working with conditional Statements.
statements like If. Else if, Select … Loops in VBA Introduction to VBA.
Case statements in VBA. VBA message boxes and input boxes.
Writing programs in involving Introduction to Creating functions and
Loops. Procedures in VBA.
Creating Message boxes and Input Using the built in functions.
boxes in VBA. Creating and editing macros.
Creating Functions and Introduction to Object Oriented
Procedures. Passing Parameters Programming Concepts. Concepts of
and Using Returned Data. Classes, Objects, Properties and
Using VBA built in functions in Methods.
programs. Events and Event driven programming
Creating and editing macros. concepts.
Writing code to work with Excel The user forms and control in Excel
VBA forms and form controls like VBA.
buttons, Checkboxes, Labels, Properties, events and methods
Combo Box, Group Box, List Box, associated with the Button, Check
Option Button, Scroll Bar and Spin Box, Label, Combo Box, Group Box,
button. Modification of object Option Button, List Box, Scroll Bar and
properties. Spin button controls.
Using ActiveX controls. Overview of ActiveX Data objects.
Programming with methods and Debugging Techniques.
events.
Debugging, Stepping Through
Code, Breakpoints, Finding and
Fixing Errors.
A simple project involving MS excel and VBA.
Using Accounting Software Smart Accounting
Basic accounting practice. Basics of Accounting, Golden Rules of
16-19 Familiarization with the Tally Accounting, Voucher Entry, Ledger
interface.
Posting, Final Accounts Preparation.
Company creation, Account Cash Book. Ratio Analysis,
Creation, Voucher Entry in Tally. Depreciation, Stock Management.
Report Generation (Creating Analysis of VAT, Cash Flow, Fund
statements like Invoice, Bill, Profit Flow Accounting.
& Loss account etc.). Introduction to Tally, features and
Performing Cost Centre & Cost Advantages.
Category management. Implementing accounts in Tally.
Managing Budgeting Systems. Double entry system of bookkeeping.
Scenario management and Budgeting Systems, Scenario
Variance Analysis. management and Variance Analysis.
Using Tally for Costing, Ratio Costing Systems, Concepts of Ratios,
Analysis, Cash Flow, Funds Flow Analysis of financial
Statements. statements, Inventory Basics, POS
Analyzing and Managing Invoicing, TDS, TCS, FBT, VAT &
Inventory. Service Tax Processing in Tally.
Performing Point of Sales and Tally Interface in Different Languages.
Taxation. Performing Systems
Administration and using other
Utilities, User creation, Backup
&Restore of Company.
Using the Multilingual
Functionality
E Commerce E Commerce
Familiarization with latest E Definition of E commerce, Types,
commerce websites viz. E bay, scope and benefits of E commerce.
Amazon, FlipKart, OLX, Quikr Difference between E commerce
etc. and comparative study of and traditional commerce.
the main features of these Capabilities requirements and
sites. Technology issues for E commerce.
20 Using E Commerce Simulator Types of E commerce web sites.
Software for Marketplace Building business on the net.
Business Simulation. Concepts of on line Catalogues,
Identifying and solving security Shopping carts, Checkout pages.
issues inE- commerce and Payment and Order Processing,
payment operations. Authorization, Chargeback and
other payment methods.
Security issues and payment
gateways.
Typing practice
Cyber Security:
21 Typing Practice in Regional
Overview of Information Security,
Language
Security threats, information Security
vulnerability and Risk management
Introduction to Directory Services,
Access Control, Software
Development Security, Privacy
protection, Audit and Security.
Introduction to I.T Act and penalties
for cybercrimes.
22-23 Project Work
24-25 Examinations
26 Admissions for CITS
Note: Syllabus for the subject of Employability Skills is common for all the trades
SYLLABUS
FOR
ELECTRICIAN
Duration : Two Years
Time : Full Time (8:30 a.m to 4:30
p.m)
Eligibility : 10 th Passed with Math &
Science
Course Fee : Rs. 38624/-
Semester Code: EL: SEM I
Week Trade Practical Trade Theory
No.
1 Implementation in the shop Occupational Safety and Health
floor of the various safety Basic safety introduction, measures. Personal protection. Visit to the different Basic injury prevention, Basic first aid, sections of the Institute. Hazard identification and avoidance, safety signs
Demonstration on for Danger, Warning, caution and personal safety
elementary first aid. message. Artificial Respiration Use of Fire extinguishers. Practice on use of fire Visit and observation of sections. extinguishers. Various safety measures involved in the
Industry. Elementary first Aid. Concept of Standard.
2 Demonstration of Trade Identification of Trade-Hand tools- hand tools. Identification of Specifications , Uses and their care maintenance. simple types- screws, nuts &
bolts, chassis, clamps, rivets
etc.
Use, care and maintenance
of various hand tools.
3 Practice in using cutting Fundamental of electricity. Electron theory- pliers, screw drivers, etc. free electron, Fundamental terms, skinning the cables and definitions, units and effects of electric
jointing practice on current single strand and multi Explanation, Definition and properties of stranded conductor. conductors, insulators and semi-conductors. Demonstration and Wires/cable & its specification. Practice on bare conductors Types of wire joints & uses. joints-- such as Britannia,
straight, T, Western union
Joints
4 Practice on soldering Solders, flux and soldering technique. & Brazing. Brazing . Measurement of Types & properties of resistors
Resistance. Specific Resistance. Determination of
specific Resistance.
5-6 Ohm’s Law - Simple electrical circuits and problems. Laws.
Verification of laws of Resistors -Laws of Resistance. series, parallel and Series, parallel and combination circuits. combination circuits.
Verification of open circuit Kirchoff’s Laws and applications. Wheatstone and closed circuit network. bridge principle and its applications. Measuring unknown Effect of variation of temperature on
resistance using different resistance. methods- Different methods of measuring the values of a) Using Wheatstone Bridge resistance. b) By voltage drop method.
Experiment to demonstrate
the variation of resistance of
a metal with the change in
temperature.
7 Demonstration and Introduction of National Electrical Code
identification of types of Voltage grading of different types of Insulators, cables. Temp. Rise permissible. Demonstration and practice Types of wires and cables standard wire gauge. on using standard wire Specification of wires and Cables-insulation and
gauge & micrometer. voltage grades -Low , medium and high voltage Practice on crimping Precautions in using various types of thimbles, Lugs. cables / Ferrules
8 Identification and use Common Electrical wiring Accessories, their
of wiring accessories specifications in line with NEC - Practice on installation Explanation of switches, lamp holders, plugs
and overhauling common and sockets. Developments of domestic
electrical accessories. circuits, Alarm & switches, Fixing of switches, holder Use & specification of Fire alarm, MCB, ELCB, plugs etc. in wooden/PVC/ MCCB. Metallic boards.
9 - 11 Grouping of Dry cells for a Chemical effect of electric current- specified voltage and Principle of electrolysis. current.
Practice on Battery Basic principles of Electroplating
Charging, Preparation of and Electro chemical equivalents. battery charging, Testing of Explanation of Anodes and Cathodes. cells, Installation of Cells - Primary & Secondary
batteries, Charging of Lead acid cell-description, methods of batteries by different charging-Precautions to be taken & testing methods. equipment, Charging of a Lead acid Ni-cadmium & Lithium cell, Cathodic
cell, filling of electrolytes- protection. Testing of charging Electroplating, Anodising. .checking of discharged and Different types of lead acid cells. fully charged battery. Application of battery/cell in Inverter, Battery
Care and maintenance of Charger, UPS, etc. Batteries Lead Acid cell, general defects and remedies. Nickel Alkali Cell-description charging. Power and capacity of cells. Efficiency of cells. Rechargeable dry cell, description advantages and disadvantages. Care and maintenance of cells
Grouping of cells of specified voltage and
current, Sealed Maintenance free Batteries, Solar
battery.
12-13 ALLIED TRADES: Introduction of fitting trade. Marking use of chisels and Safety precautions to be
hacksaw on flats, sheet observed Description of files, hammers, metal filing practice, filing chisels hacksaw frames and blades- their
true to line. specification and grades. Care and maintenance
Sawing and planning of steel rule, try square and files. Marking tools practice. Practice in using description and use. Description of firmer chisel and preparing
simple half lap joint. planes, chisels mallet claw hammer, marking, dividing and holding tools-their care and
maintenance.
14 Drilling practice in hand Types of drills description and drilling machines, drilling and power drilling proper use, care and maintenance. Description of machines. taps and dies, types of rivets and riveted joints. Grinding practice Use of thread gauge.
Practice in using taps and
dies, threading hexagonal
and square nuts etc. cutting
external threads on stud
and on pipes, riveting
practice.
15 Practice in using snips, Description of marking and marking and cutting cutting tools such as snubs shears punches and
of straight and curved other tools like hammers, mallets, etc. used by
pieces in sheet metals. sheet metal workers. Different types soldering Bending the edges of materials, fluxes and process. sheets metals. Riveting Types of different soldering irons and their
practice in sheet metal. proper uses.
Practice in making different Use of different bench tools used by sheet metal joints in sheet metal in worker.
soldering the joints.
16-17 Trace the magnetic field. Magnetism - classification of magnets, Assembly / winding of a methods of magnetising, magnetic materials. simple electro magnet. Properties, care and maintenance. Use of magnetic compass. Para and Diamagnetism and Ferro magnetic
Identification of different materials.
types of Capacitors. Principle of electro-
Charging and discharging of
capacitor, Testing of rules, Magnetic field of current carrying
Capacitors using DC voltage conductors, loop and solenoid. and lamp. MMF, Flux density, reluctance. B.H. curve, Hysteresis, Eddy current. Principle of electro-
Electrostatics: Capacitor- Different types, functions and uses.
18-19 Determine the Alternating Current -Comparison and
characteristics of RL,RC and Advantages D.C and A.C. Related terms
RLC in A.C. Circuits both in frequency
series and parallel. Instantaneous value, R.M.S. value Average value, Experiment on poly phase Peak factor, form factor. circuits. Current, voltage, Generation of sine wave, phase and phase
power and power facor difference. measurement in single & Inductive and Capacitive reactance Impedance
poly- phase circuits. (Z), power factor (p.f). Measurement of energy in Active and Reactive power, Simple problems on
single and poly-phase A.C. circuits, single circuits. phase and three-phase system etc. - Use of phase Problems on A.C. circuits. sequence meter. Power consumption in series and parallel, P.F. etc. Concept three-phase Star and Delta connection. Line and phase voltage, current and power in a 3
phase circuits with balanced and unbalanced
load.
20 Practice on Earthing - Earthing - Principle of different methods of different methods of earthing. i.e. Pipe, Plate, etc
earthing. Importance of Earthing. Measurement of Earth Improving of earth resistance
resistance by earth tester. Earth Leakage circuit breaker (ELCB). Testing of Earth Leakage by In absence of latest revision in respective BIS
ELCB and relay. provision for Earthing it is recommended to
follow IEC guidelines. 21 Determine the resistance by Basic electronics- Semiconductor energy level,
Colour coding
Identification of Type of materials P-N-junction. Classification of active/passive components. Diodes Reverse and Forward Bias, Heat sink. Diodes-symbol - Tests - Specification of Diode
PIV rating. Construct & Test Half wave Explanation and importance of D.C. rectifier
rectifier ckt. circuit. Half wave, Full wave and Bridge circuit. Full wave rectifier ckt. Filter circuits-passive filter. Bridge rectifier ckt.
22-23 Industrial visit / project work
24-25 NCVT EXAMINATION
26 Semester Gap
Second Semester Semester Code: ELE: SEM II
Week Trade practical Trade Theory
No.
1-2 Different wave shapes of Working principle and uses of an
rectifiers and their values oscilloscope. using C.R.O. Explanation of principle of working of a
Identification of terminals, transistor & configuration. construction & Testing of Types of transistors & its application. transistor. Specification and rating of transistors. Assembly and testing of a Explanation of transistor Amplifiers, single stage Amplifier and Amplifiers. class A,B and C
checking using an Power amplifier
oscilloscope.
3-4 Measure Voltage, current & Explanation of oscillator-working
wave shape of oscillator principle
using CRO. Explanation of stages and types. Simple circuits containing Multivibrator applications. U.J.T. for triggering, FET as Introduction of basic concept of ICs, U.J.T., an amplifier and Power F.E.T. control circuits by S.C.R. Basic concept of power electronics devices and Diac, triac, I.G.B.T. e.g. S.C.R., Diac, Triac, power MOSFET, G.T.O
Logic gates and circuits. and I.G.B.T. Digital Electronics -Binary numbers, logic
gates and combinational circuits,
5-6 Practice in casing, Capping. Electric wirings, I.E. rules. Conduit wiring with Types of wirings both domestic and minimum to more number industrial. of points. Specifications for wiring. Use of two way switches. Grading of cables and current ratings. Testing of wiring Principle of laying out in domestic wiring. installation by meggar. Voltage drop concept. -Fixing of calling Wiring system - P.V.C., concealed system. bells/buzzers. Maintenance and Repairing data sheet -Making of test boards & preparation. Specifications, standards for
extension boards conduits and accessories
Identification & - Power Wiring
demonstration on conduits - Control Wiring
and accessories & their uses, - Information Communication
cutting , threading & laying - Entertainment Wiring. Installation, Testing, Testing of wiring installation by meggar. Maintenance and Repairing
of wiring.
7 Application of fuses, relay, Study of Fuses, Relays, Miniature circuit MCB, ELCB. breakers (MCB), ELCB, etc.
8-9 Identification of the parts of D.C. Machines - General concept of Electrical
a D.C. machine. Machines.
Connection of shunt Principle of D.C. generator. Use of
Generators
Armature, Field Coil, Polarity, Yoke, Cooling
Voltages build up in DC
Fan, Commutator, slip ring Brushes,
Shunt Generator (OCC)
Laminated core.
Measurement of voltages,
Demonstration on field Explanation of D.C. Generators-types, parts.
excitation.
E.M.F. equation-self excitation and separately
excited Generators-Practical uses. Brief
description of series, shunt and compound
generators.
10-11 Connection of compound Explanation of Armature reaction, inter poles
Generator, Voltage and their uses, connection of inter poles,
measurement, cumulative Commutation. Losses & Efficiency of
and differential No Load D.C.Generator, Parallel Operation of
and Load characteristics of D.C.Generator.
Series, Shunt and Compound Application of D.C. generators.
Generator. Care, Routine & preventive maintenance.
Controlling and protecting
DC Generator.
Practicing dismantling and
assembling in D.C. Machine.
12-13 Identification of parts and DC Motors - Terms used in D.C. motor-
terminals of DC motors. Torque, Brake Torque, speed, Back-e.m.f. etc.
Connection, starting, and their relations, Types of D.C.Motor.
running of DC motors using Starters used in D.C. motors
Starters. Related problems
Characteristics curve of DC Characteristics of D.C.Motor, Losses &
motors. Efficiency, Application of D.C. motors.
Practical application of Care, Routine & preventive maintenance.
D.C. motors.
14 Speed control of Types of speed control of DC motors in
DC motors by voltage , industry.
field, armature & Control system. AC-DC, DC-DC control.
Word-Leonard system.
15-18 Identification of types of Working principle of Transformer.
transformers. Connection of classification C.T., P.T. Instrument and
transformers, Auto Transformer(Variac), Construction,
Transformation ratio, OC Single phase and Poly phase.
(No-load) and SC (short E.M.F. equation, parallel operation of
circuit) tests,efficiencies of transformer, their connections.
transformers, testing of Regulation and efficiency.
transformer, parallel Type of Cooling for transformer.
operation of transformer. Protective devices.
Use of Current Transformer Specifications, simple problems on e.m.f.
(C.T.) and Potential Equation, turn ratio, regulations and
(Voltage) transformer (P.T.) efficiency. Special transformers. Testing of single phase and Transformer Classification of transformer. Three Phase Transformers - Components, Auxiliary parts i.e. breather, Cleaning, maintenance, Conservator, buchholze relay, other
testing and changing of oil. protective devices. Transformer oil testing Single and three phase and Tap changer (off load and on load). Dry
connection. type transformer. Bushings and termination.
19-21 Identify the type of Electrical Measuring Instruments - Instruments. -types, indicating types. Deflecting torque, Use of -PMMC , MI meter, Controlling torque and
Multi-meter(Digital/Analog) Damping torque , , Wattmeter, P F meter, PMMC & MI meter (Ammeter, Voltmeter) Energy meter, Frequency -Range extension
meter, -Multimeter(Digital/Analog)
Calibration of - Multi-meter -Wattmeter
Phase sequence meter, - P.F. meter
Digital Instruments, etc - Energy meter (Digital/analog)
Calibration of Energy meter. Insulation Tester (Megger), Earth tester. -Frequency meter
-Phase Sequence meter -Multimeter Analog and Digital -Tong tester
-Techometer. 22-23 Industrial visit / project work
24-25 NCVT EXAMINATION
26 Semester Gap
SYLLABUS
FOR
Advance Diploma in
Computer Software Hardware &
Networking
Duration : One Year
Time : 2 Hours Daily
Eligibility : 10 th Passed
Course Fee : Rs. 15000/- Plus Service
Tax
Advance Diploma In Computer
Software , Hardware & Networking(ADCSHN)
DURATION : 1 YEAR PART TIME TIMING : 2 HOURS DAILY
COURSE FEE: RS. 14000/- SECURITY DEPOSIT :NIL
Module – 1(3 Months)
Month -1 (FUNDAMENTALS OF COMPUTER SYSTEM) Theory Types of computers, Computer Hardware, Software, Firmware, Input & Output Devices, Primary and Secondary Storage, Fundamental of Computer , Types of Computer, Block Diagram Of Digital Computer and Computer System, Hardware, Software and Human ware. Digital Computer, Memory Structure, Primary Memory, Secondary memory, Registers unit, Data bus Address Bus, CMOS setups, Different slots in CPU, Power units in CPU, types of CPUs and their slots. Operating System and Types Of Translators . Study of Computer CPU and different types of Input Output Devices.
STUDY OF COMPUTER SOFTWARE)
Introduction to Microsoft Word 2003
To open a file , Using the Scroll Bar, To display additional toolbars, To turn a fixed toolbar to a floating toolbar To delete To copy text, graphic, or other items to the Clipboard To copy multiple items to the Clipboard To cut selected items from a document To paste data from the Clipboard To paste multiple items from the Clipboard To start Excel using the Windows Start menu To enter text into a worksheet To enter numbers into a worksheet To save a workbook & To close a file. To exit Microsof
the information that you wish to fill the selected range with. Press Ctrl+Shift+Enter and the range will be filled.
To move to a particular cell (quick way)
Enter the cell that you wish to jump to into the Name Box (at the top, left of the screen). In the example
shown the cell reference J50 has been entered. When you press the Enter key you will jump to the cell you entered. To move from cell to cell using the keyboard
REVISION MICRO SOFT OFFICE - WORD Microsoft Word-Menu Bar File, Edit, View Insert, Format, Tools ,Table, Window etc., Standard toolbar , format bar, drawing objects , Table and border , mail merging and other objects
Month-2 (STUDY OF COMPUTER SOFTWARE)
Microsoft Excel - Selection Techniques The selection techniques in Microsoft Excel allow you to select or highlight the cell(s) quickly so that you can perform the tasks such as deleting, copying, etc.
To select a cell - Click on the c -
hand mouse button and drag over the cells you wish to
include in the selection.To select a range of cells (making up a re
rectangular block that you wish to select (i.e. the left top-left hand corner) Move down to the cell that marks
the bottom-
on the last cell of the required block and release the Shift key.
To select a non-contiguous range Select the first cell or range. While holding down the Ctrl key, select the next range of cells. To select a row Click on the row heading number. To select a column Click on the column heading letter. To select an entire worksheet .
Microsoft Excel - Inserting and Deleting
Microsoft Excel offers a convenient way for you to either insert or delete cell(s), column(s), row(s), or entire worksheet.To insert a row(s) into a worksheet Select the row you want to move down when the new row is inserted above it. To select more than one row, drag the mouse pointer across the required row headings. Right-click on the selected row() to display a pop-up menu.
one column, drag the mouse pointer across the -
click on the selected column(s) to display a pop-up menu.
To delete a row or column Delete command from the pop-up menu. To delete cells or ranges of cells The formatting toolbar icons and functions: The Excel Formatting – Fonts The Excel Formatting – Alignment
To align data between the top and bottom of a cell To change the orientation of data cells To wrap
multiple lines of data in a cell To shrink the text into one cell To merge several cells The
Excel Formatting – Colors To change the color of text On the Excel Formatting toolbar,
click the down arrow next to the Font Color icon. The Excel Formatting – Numbers To
format a number as a currency REVISION OF PRACTICAL MICRO SOFT OFFICE (EXCEL) Introduction to Micro Soft Excel work sheet. Menu Bar- File, Edit, View, Insert, Format, Data, Tools Standard toolbar , format bar, Table and border and other objects formula etc..
Month-3 (STUDY OF COMPUTER SOFTWARE)
MICRO SOFT OFFICE (POWER POINT) Introduction to Micro Soft Power Point Presentation. Menu Bar- File, Edit, View Insert, Format, Tools , Slide Show etc Standard toolbar , format bar, drawing objects , Table and border and other objects. TYPING TUTOR- Typing practice of paragraph, letters, design documents etc. INTERNET APPLICATION & USAGE .
Theory & practical Examination, Feedback
ANNEXURE-2
Module – 2(3 Months)
Month-4 (WINDOWS AND SOFTWARE INSTALLATION) PRACTICAL-Operating system-An introduction to different type of software. System software- compiler , Linker, Interpreter, Linker, Loader, file dumper, Backup software, sorter, merger, file copier, dumper, paging and overlying , data backup etc. Types of computers and related operating system, Computer Hardware operate on drivers, Software-Application software, Programming language ,Firmware, Input & Output Devices and driver, Primary and Secondary Storage, Fundamental of Computer and overview. Operating System and Types Of Translators . Study of Computer CPU and different types of Input Output Devices.
Practical Operating System , MS-DOS, CMOS Setup, NDD , FDISK, Disk Manager, PC Tools, G-Disk, Partition Magic, Window-Me, Windows–Xp , Windows- Vista (Trial Version/ demo Version) Control Panel, Anti Virus Installation , My Computer Property, Network Neighbor Hood.
Study of Operating System, Installation of Windows and its Component, Installation of Drivers , Installation of System and Application software and Internet Operation, Installation of Broadband DLS, Dial up, Mobile as Modem for Internet , E-mail, Downloading etc.
Month- 5 (Installation of windows)
Installation of various MSDOS, Various commands used in MSDOS. Formatting HDD, FDD, External drive.Windows-98, Windows Me, Windows Xp, Windows Vista, Windows 7, various steps of windows installation, Control Panel, Task Bar etc.
Practical Control Panel, Accessibility Option, Add Hardware, Add Remove Program, Administrative Tools, Automatic Updates, Date & Time, Display Settings, Folder Option, Fonts, Modem, Internet Explorer, Mouse, Keyboard, Network Neighborhood, Speaker, Power Option, User Account, Disk Management, Security Setting, Windows Option etc.
Month- 6 ( Practice of Installations Of Operating System, Drivers & Application Software) Installation of Drivers, Application Software‟s, Task Bar settings, Disk Management, Windows , Ghost
etc. Internet Installation, IP settings, Router configuration, Modem Configuration etc. Installation of various
Anti Virus software and their settings. Installation of Printer and Scanner software and configuration.
Theory & practical Examination, Feedback
ANNEXURE-3
Module – 3 (3 Months) Month- 7 (REPAIR AND MAINTENANCE OF COMPUTER HARDWARE) Key board , Mouse ,Floppy Drive & Hard Disk Drive Computer Hardware, Input & Output Devices, Primary and Secondary Storage, Fundamental of Computer , Types of Computer, Block Diagram Of Digital Computer and Computer System, Hardware, Software and Human ware. Digital Computer, Memory Structure, Primary Memory, Secondary memory, Registers unit, Data bus Address Bus, CMOS setups, Different slots in CPU, Power units in CPU, types of CPUs and their slots. Operating System and Types Of Translators . Study of Computer CPU and different types of Input Output Devices.
Keyboard Switch, Keyboard organization, Software interfacing, Keyboard / system, communication, Keyboard controller, Original PC / PC- AT Keyboard, Key Layout, Troubleshooting , Disassembly, cleaning and reassembly, Keyboard Ergonomic. Mouse , Mouse Type, Mechanical Mouse, Optical - Mechanical Mouse, Optical Mouse, Connecting a Mouse, Mouse Driver, Using a Mouse, Serial Interfacing, Serial Connector - 25 pin, Serial Connector - 9 pin, Serial Cable - 25 pin to 9 pin
Types of FDD, parts of FDD, configuration of FDD, Repair, Maintenance, Assembly and Trouble Shooting of FDD. Types of Hard disk and their Function, Storage and Speed, Parts of HDD, connections, setting of HDD, installation of HDD, trouble shooting of HDD, various problems related to HDD and rectification, types of HDD cable. Month- 8 (REPAIR AND MAINTENANCE OF COMPUTER HARDWARE)
CDROM , CD Writer , DVD Combo & DVD Writer Drive Types of CDROM drive and their functions, storage and speed, parts of CDROM drive, connections, setting of CDROM drive, installation of CDROM drive, CDROM drive assembly, various problems related to CDROM drive and their rectification, CDROM drive data cable. Trouble shooting of HDD, Also learning about CD WRITER drive. Technology of DVD Combo & DVD Writer.
Printer (Dot Matrix, DeskJet & Laser Printer) Types of Printers, Working Principle of Printer, Connection With System, Checking of Printer, Parts Present In Printers, Function of Individual Part, Assembly/Maintenance And Trouble Shooting. Practical of Dot Matrix, DeskJet & Introduction to Laser Printer. Month- 9 (REPAIR, MAINTENANCE AND TROUBLE SHOOTING OF LAPTOP) Introduction to Laptop and its configuration and Development of Laptop Technology. Repair & Maintenance of Laptop. Fault Finding & Trouble Shooting. Software Installation and Configuration. Wi-Fi Networking using Laptop. (REPAIR AND MAINTENANCE OF COMPUTER SYSTEM) Assembly & Disassembly of Computer System- Cabinet Setting, SMPS Fitting , Mother Board, Power section, Data Cable , Power cables, CMOS, Control section, RAM, CDROM & HDD fittings, Processor fittings etc. Assembly & Disassembly of Lap Top, Laser Printer , Dot Matrix Printer and Desk jet Printer.
Theory & practical Examination, Feedback
Month – 11 ( NETWORKING & NETWORK ADMINISTRATION) (B) TCP/IP Concept IP Address And Internet Protocol, Subneting, Subnet Mask . Peer To Peer Networking, Hardware & Software Sharing. Checking Your Hardware Compatibility, Collecting Network Information, Making A Backup, Logging On, Changing File Properties, Compressing And Encrypting File With NTFS, Running Program From Start Menu, Adding And Removing Window Components, Looking At The Registry, Adding Printers, Installing A Networking Printer Domain based Networking, Installation of Windows 2003 Advanced Server and Client. Client Server architecture. Network Administration. Securities, Policies and Authentication etc. Wireless Networking. Introduction to Wi/fi. English Speaking & Personality Development (A) Translation from Hindi to English, Commonly used English. Letter, Application, Noting and Drafting, DO Letters, Replies , Email etc. English Speaking namely Grammar, Clarity, Fluency, Phonetics and Sounds, Reading, Writing , Spoken , Communication Skills, Life Skills,
Real life Experiences
Month –12 ( NETWORKING & NETWORK ADMINISTRATION) (C)
Installation Of Windows 2003 Server Installation, Domain Based Networking, Client Server Architecture, Network Administration, Securities, Policies & Authentication Etc. VPN (Virtual Private Network), Configuring And Managing Of DNS(Domain Name Service) , Configuring And Managing Of DHCP(Dynamic Host Configuration Protocol) , Working Of ADS(Active Directory Server), Outlook Express, Virtual Drive(install windows) . Team Viewer Software, Wireless Networking. Introduction To Wi/Fi. Wi/Fi installation. Coding, Dongle installation in USB and settings. Administration of Wi/Fi networking. Accessing Data.
Personality Development (B) Behavioral Training, How to overcome negativity and deal with negative people, Interview Skills, Stress management, Positive Attitude, Confidence Building, Smile Management, How To Use Body Language Effectively, Posture and Gestures, Public Speaking Confidence building and Resume Writing
Theory & practical Examination, Feedback FINAL RESULT AND DISTRIBUTION OF CERTIFICATES AND PLACEMENT SUPPORT
ANNEXURE-4
– Module – 4 (3 Months)
Month 10( NETWORKING & NETWORK ADMINISTRATION) (A)
Introduction and Concepts of networking . Cabling and Cable colour coding. Network card installation, Installation of Hub and connection of Network cards and its configuration. IP Address and Internet Protocol TCP/IP concept. Properties of IP Address, Subnet Mast and Default Gateway and DNS server. Peer to Peer Networking, Hardware sharing, Software, Folder and file Sharing. Introduction Of Networking, Types Of Networking, Topologies, OSI Model With Seven Layers, Types Of Cables, Broadcast , Multicast, Unicast, Simplex, Half- Duplex, Full - Duplex, Color Code Of Cables, Networking Card Installation, Difference Between Internet & Intranet, HUB, SWITCH, ROUTER, REPEATER, BRIDGES, GATEWAY .
SYLLABUS
FOR
Advance Diploma in
Computer Software & Web Designing
Duration : One Year
Time : 2 Hours Daily
Eligibility : 10 th Passed
Course Fee : Rs. 15000/- Plus Service
Tax
Advance Diploma In Computer
Software & WebDesigning(ADCSW)
DURATION : 1 YEAR PART TIME TIMING : 2 HOURS DAILY
COURSE FEE: RS. 12000/- PLUS S.TAX SECURITY DEPOSIT:NIL
Module – 1(3 Months)
Month -1 (FUNDAMENTALS OF COMPUTER SYSTEM) Theory Types of computers, Computer Hardware, Software, Firmware, Input & Output Devices, Primary and Secondary Storage, Fundamental of Computer , Types of Computer, Block Diagram Of Digital Computer and Computer System, Hardware, Software and Human ware. Digital Computer, Memory Structure, Primary Memory, Secondary memory, Registers unit, Data bus Address Bus, CMOS setups, Different slots in CPU, Power units in CPU, types of CPUs and their slots. Operating System and Types Of Translators . Study of Computer CPU and different types of Input Output Devices.
STUDY OF COMPUTER SOFTWARE)
Introduction to Microsoft Word 2003
To open a file , Using the Scroll Bar, To display additional toolbars, To turn a fixed toolbar to a floating toolbar To delete To copy text, graphic, or other items to the Clipboard To copy multiple items to the Clipboard To cut selected items from a document To paste data from the Clipboard To paste multiple items from the Clipboard To start Excel using the Windows Start menu To enter text into a worksheet To enter numbers into a worksheet To save a workbook & To close a file. To exit Microsoft Excel . To fill a ran
the information that you wish to fill the selected range with. Press Ctrl+Shift+Enter and the range will be filled.
To move to a particular cell (quick way)
Enter the cell that you wish to jump to into the Name Box (at the top, left of the screen). In the example
shown the cell reference J50 has been entered. When you press the Enter key you will jump to the cell you entered. To move from cell to cell using the keyboard
REVISION MICRO SOFT OFFICE - WORD Microsoft Word-Menu Bar File, Edit, View Insert, Format, Tools ,Table, Window etc., Standard toolbar , format bar, drawing objects , Table and border , mail merging and other objects
Month-2 (STUDY OF COMPUTER SOFTWARE)
Microsoft Excel - Selection Techniques The selection techniques in Microsoft Excel allow you to select or highlight the cell(s) quickly so that you can perform the tasks such as deleting, copying, etc.
To select a cell - Click on the cell you wish to select.T -
hand mouse button and drag over the cells you wish to k on the first cell of the
rectangular block that you wish to select (i.e. the left top-left hand corner) Move down to the cell that marks
the bottom-
on the last cell of the required block and release the Shift key.
To select a non-contiguous range Select the first cell or range. While holding down the Ctrl key, select the next range of cells. To select a row Click on the row heading number. To select a column Click on the column heading letter. To select an entire worksheet .
Microsoft Excel - Inserting and Deleting
Microsoft Excel offers a convenient way for you to either insert or delete cell(s), column(s), row(s), or entire worksheet.To insert a row(s) into a worksheet Select the row you want to move down when the new row is inserted above it. To select more than one row, drag the mouse pointer across the required row headings. Right-click on the selected row() to display a pop-up menu.
use pointer across the
-click on the selected column(s) to display a pop-up menu.
To delete a row or column Delete command from the pop-up menu. To delete cells or ranges of cells The formatting toolbar icons and functions: The Excel Formatting – Fonts The Excel Formatting – Alignment
To align data between the top and bottom of a cell To change the orientation of data cells To wrap
multiple lines of data in a cell To shrink the text into one cell To merge several cells The
Excel Formatting – Colors To change the color of text On the Excel Formatting toolbar,
click the down arrow next to the Font Color icon. The Excel Formatting – Numbers To
format a number as a currency REVISION OF PRACTICAL MICRO SOFT OFFICE (EXCEL) Introduction to Micro Soft Excel work sheet. Menu Bar- File, Edit, View, Insert, Format, Data, Tools Standard toolbar , format bar, Table and border and other objects formula etc..
Month-3 (STUDY OF COMPUTER SOFTWARE)
MICRO SOFT OFFICE (POWER POINT) Introduction to Micro Soft Power Point Presentation. Menu Bar- File, Edit, View Insert, Format, Tools , Slide Show etc Standard toolbar , format bar, drawing objects , Table and border and other objects. TYPING TUTOR- Typing practice of paragraph, letters, design documents etc.
INTERNET APPLICATION & USAGE .
Theory & practical Examination, Feedback
ANNEXURE-2
Module – 2(3 Months)
Month-4 (WINDOWS AND SOFTWARE INSTALLATION) COREL DRAW Introduction About Corel Draw , The User Interface , Creating a New Document , Opening a Existing Document , Working With Templates , Layout , Import , Export . Tools- Pick tool Smudge Brush, Roughen Brush, Free Transform Tool, crop tool, Hand Tool, text tool, freehand tool, rectangular tool, Interactive tool, Eyedropper tool, outline tool, Fill tool, interactive Fill tool, Selecting fill and outline color. Corel Draw Layout - Insert Page, Delete Page, Rename Page, Page Setup, Page Background, Working with Curves Free Hand Tool, Bezier Tool, Pen Tool, Polyline Tool, Artistic Media Tool, Point Curve Tool, Shape Tool, Working with
Shape & Object Drawing Rectangle, Drawing Circle, Drawing Polygon, Creating Star, Working with Basic shape, Arrows, Flowchart Shape, Banner Shape , Working with Text & Line - Formatting Text, Formatting Paragraph, Changing Shape of the Text, Working With Lines. Interactive Tool-Blending tool, Contouring the Object, Distorting Objects, Envelope tool, Extruding of the Object, Drop Shadow, Applying Transparency Effect. Working with Bitmaps- Converting Objects to Bitmap, 3D Effect, Art Effect, Blur Effect, Color Transformation Effect, Contour Effect, Creative Effect, Distort Effect, Noise Effect, Arranging Object Transforming Object, Align & Distribute Object Ordering Object, Locking & Unlocking Object Shaping Object.. Designing Visiting Cards, Boucher, Poster, Logo & Many More
Month- 5 (Installation of windows) PAGE MAKER Creating a New Document , Setting the Margins , Setting the Page Size , Changing the Page Orientation ,
Setting the Page Numbers , Changing the Page size view , Displaying Rulers , Changing the Rulers Measurement System , Using Rulers , Using Guides , Adding Guide lines to Master Pages ,Aligning to
Guidelines , Displaying Guidelines , Locking Guidelines , Entering Text , Changing the font Families ,
Changing font size , Changing typeface styles , Changing Character Specifications , Changing type leading , Changing character width , Changing tracking, Saving your document , Saving a new document , Saving
Existing Document , Saving a document as another document , Reverting to a previously saved version Developing a Paragraph , Typing a text , Adding special character to text , Aligning text , Formatting
Paragraph , Changing Indents , Changing the Space around paragraph , Changing Paragraph Alignment , Controlling How paragraphs break between pages and columns , Adding lines above or below your paragraph ,
Creating a Frame , Converting other objects to Frames , Selecting text & Dragging Text , Editing Text , Cutting , copying and Pasting Text , Using Undo & revert , Inserting & Removing pages , Adjusting
Hyphenation , Adjusting Indents and Tabs , Setting and Changing Tabs , Setting and Changing Indents ,
Settings the Leader Style , Resetting the Tab Ruler , Adding Shapes , Changing lines and fill specifications , Changing Round Corner , Creating Header & Footer , Defining Style , Creating a new style , Editing a style ,
Removing Style , Copying style , Applying style to text , Changing style , Developing a long Document , Using Story Editor , Switch between story editor and layout editor , Closing the story editor and placing the
story , Checking your spelling , Using find feature , Using Color , Opening a color palette , Adding color to text , Defining a custom colors , Printing , Printing your document , Printing a proof copies , Setting paper
options
Month- 6 ( Practice of Installations Of Operating System, Drivers & Application Software) PHOTOSHOP Introduction of PhotoShop , Creating a New File. Main Selections Picking color Filling a selection with color More ways to choose colors and fill selections Painting with paintbrush tool Using the magic wand tool and applying a filter Saving your document , Color Mode Gray Scale Color Mode RGB Color Mode CMYK Color
Mode Bitmap Mode Open a file Preference , Foreground & background Changing Foreground and Background colors Using the Large color selection Boxes and small color swathes Using the Eyedropper tool to sample Image color Changing the Foreground Color While using a Painting Tool , Using Brushes Millions of Brushes in One! Selecting the Brush Shape 11 Drawing a vertical and Horizontal Straight lines with any brush Drawing connecting Straight Lines ( at any angle) with any brush Creating a New Brush Saving Brushes Loading Brushes Creating a Custom Brushes Using the Painting Modes Fade Airbrush Options Pencil Options , Rubber Stamp Options Rubber stamping an Aligned Clone Rubber Stamping, Impressionist Style Using line tool , Using the Editing Tool . Introduction of layers Creating & editing New layers Adding a background , Creating Layer Mask Layer Masks Adjustment Layers. Adding Fills and Gradients Filling with paint bucket tools Filling type with grading Fills , Applying Filters Blur Filters Render Filters Sharpen Filters Sketch Filters Texture Filters Other Special Filters , Printing your document , Save your file , Save file as a JPEG, TIFF, GIF, PNG
Theory & practical Examination, Feedback
ANNEXURE-3
Module – 3 (3 Months)
Month- 7 (INTERNET & WEB DESIGN) Internet & Web Design Brief History of Internet. What is World Wide Web. Why create a web site. Web Standards. Practice the use of multimedia components in HTML documents. Designing of webpage-Document Layout, Working with List, Working with Tables. Practice Hyper linking, Designing of webpage-Working with Frames,Forms and Controls. Prepare creating style sheet, CSS properties, Background, Text,Font and styling etc. Working with List, HTML elements box, Positioning and Block properties in CSS. Designing with cascading style sheet-Internal and External style sheet. Elements of HTML Basic knowledge in HTML tags & skill of creating web pages should be known-What is HTML, HTML Documents, Basic structure of an HTML document, Creating an HTML document, Mark up Tags, Heading-Paragraphs, Line Breaks, HTML Tags. Working with Text, Working with Lists, Tables and Frames, Working with Hyperlinks, Images and Multimedia, Working with Forms and controls. Month- 8 (CASCADING STYLE SHEETS) Introduction to Cascading Style Sheets Concept of CSS, Creating Style Sheet, CSS Properties, CSS Styling(Background, Text , Format, Controlling Fonts, Working with block elements and objects, Working with Lists and Tables, CSS Id and Class, Box Model(Introduction, Border properties, Padding, Properties, Margin properties. CSS Advanced(Grouping, Dimension, Display, Positioning, Floating, Align, Pseudo class,
Navigation Bar, Image Sprites, Attribute sector, CSS Color, Creating page Layout and Site Designs. Module 6 6.0 Introduction to Web Publishing or Hosting Creating the Web Site, Saving the site, Working on the web site, Creating web site structure, Creating Titles for web pages, Themes-Publishing web sites.
Month- 9 (REPAIR, MAINTENANCE AND TROUBLE SHOOTING OF LAPTOP) Basic scalar data types and their operators, Flow control, Complex data types: arrays, structures and pointers.
Data types Floating point values in real life and in “C”, float literals, Arithmetic operators, Priority
and binding, Post- and pre -incrementation and –decrementation. Char type and ASCII code, char literals, Equivalence of int and char data.
Comparison operators, Conditional execution and if keyword, printf() and scanf() functions: absolute basics, Flow control, Conditional execution continued: the “else” branch, More integer and float types, Conversions , Typecast and its operators. Loops – while, do and for, Controlling the loop execution – break and continue, Logical and bitwise operators, Arrays Switch: different faces of „if‟, Arrays– why do you need them?, Sorting in real life and in a computer memory, Initiators: a simple
way to set an array. Pointers: another kind of data in “An address, a reference, a dereference and the sizeof operator, Simple pointer and pointer to nothing (NULL), & operator Pointers arithmetic, Pointers vs. arrays: different forms of the same phenomenon, Using strings: basics, Basic functions dedicated to string manipulation, Memory management and structures, The meaning of array indexing. Arrays of arrays and multidimensional arrays,
Memory allocation and deallocation: malloc() and free() functions. Arrays of pointers vs. multidimensional arrays, Structures , Declaring, using and initializing structures. Pointers to structures and arrays of structures, Basics of recursive data collections. Functions –How to declare, define and invoke a function.
Header files and their role, Files and streams Files vs. streams: where does the difference lie?, Header files needed for stream operations, FILE structure Opening and closing a stream, open modes, errno variable, Reading and writing to/from a stream, Predefined streams: stdin, stdout and stderr, Stream manipulation: fgetc(), fputc(), fgets() and fputs() functions, Raw input/output: fread() and fwrite() functions. Preprocessor and complex declarations. Preprocessor – #include: how to make use of a header file,
#define: simple and parameterized macros, #undef directive, Predefined preprocessor symbols,
Macro operators: # and ##, Conditional compilation: #if and #ifdef directives, Avoiding multiple
compilations of the same header files.
Theory & practical Examination, Feedback
ANNEXURE-4
– Module – 4 (3 Months)
Month 10( Introduction to PHP) Introduction to PHP- Evaluation of PHP, Basic Syntax , Defining variable and constant , Php Data type , Operator and Expression Handling Html Form With PHP- Capturing Form Data , Dealing with Multi-value filed , Generating File
uploaded form , Redirecting a form after submission Decisions and loop-Making Decisions , Doing Repetitive task with looping , Mixing Decisions and , looping with Html
Function- What is a function , Define a function , Call by value and Call by reference, Recursive function String-Creating and accessing String , Searching & Replacing String , Formatting String , String Related Library function, Array- Anatomy of an Array, Creating index based and Associative array, Accessing array Element , Looping
with Index based array , Looping with associative array using each() and foreach(),Some useful Library function Working with file and Directories- Understanding file& directory , Opening and closing a file, Coping ,renaming and deleting a file , Working with directories , Building a text editor , File Uploading & Downloading State management- Using query string(URL rewriting) , Using Hidden field , Using cookies , Using session String matching with regular expression- What is regular expression , Pattern matching in Php , Replacing text , Splitting a string with a Regular Expression Generating Images with PHP- Basics of computer Graphics , Creating Image , Manipulating Image , Using text in Image Database Connectivity with MySql- Introduction to RDBMS , Connection with MySql Database , Performing basic database operation(DML) (Insert, Delete, Update, Select), Setting query parameter , Executing query , Join (Cross joins, Inner joins, Outer Joins, Self joins.) Java Script-Introduction to Javascript, Three ways to use Javascript, , Working with events, Client-side Validation
JQuery- Introduction to JQuery, Validation using JQuery, JQuery Forms, JQuery Examples,
AJAX- Introduction to AJAX, PHP with AJAX, Working with database. Month – 11 ( Advance PHP )
Introduction to OOPS-Introduction , objects , Declaring a class, The new keyword and constructor, Destructor , Access method and properties using $this variable , Public ,private, protected , properties and
methods , Static properties and method , Class constant , Inheritance & code reusability , Polymorphism ,
Parent:: & self:: keyword , Instanceof operator , Abstract method and class, Interface , Final
Exception Handling- Understanding Exception and error, Try, catch, throw . Introduction to CakePHP- Understanding the MVC Pattern Models , How MVC works? , Congfiguration CakePHP , Setting up CakePHP with apache Enviornment eg. Enable mod_rewrite, Configuration CakePHP to work with database , Running Cake for the first time , Cake Convention: Naming convention for MVC and database tables
Models: Creating up model for a database table- Fetching data , Saving and updating data , Deleting data , User defined function in model , Data Validation
controller-Controller function , Interacting with model , Interacting with views, parameters , Redirection , Getting post data,
Working with configuration layout , Creating custom layout , Element and
Cake session: Storing data in cake session , Reading a session data , Delete data from session
Month –12 ( Project in PHP-Website Development) WordPress Introduction-Understanding and Using domain names , WordPress Hosting Options , Installing WordPress on a Dedicated Server , Understanding Directory Permissions , Basics of the WordPress User Interface- Understanding the WordPress Dashboard , Pages, Tags, Media and Content Administration , Core WordPress Settings Finding and Using WordPress Plugins- Finding and Installing Plugins Quickly and Easily , Upgrading WordPress Plugins , Recommended WordPress Plugins Working with WordPress Themes- Understanding the Structure of WordPress Themes , Finding Themes and Choosing the Right One , Installing and Configuring Themes , Editing and Customizing , themes , Using Theme Frameworks and Parent-Child Themes , Theme Best Practices WordPress Content Management- Understanding Posts Versus Pages , Organizing Posts with Categories , Connecting Posts Together with Tags , Custom Post Types and Custom Taxonomies , Managing Lists of Links Creating and Managing Content-Hands-On Training on the WordPress Editors , Hands-On Training on
the New Image Editor
Framework- CodeIgniter , CakePHP CMS- Introduction to - Joomla! , Drupal , Magento (E-commerce )
PROJECT ON WEB SITE DEVELOPMENT
Theory & practical Examination, Feedback FINAL RESULT AND DISTRIBUTION OF CERTIFICATES AND PLACEMENT SUPPORT
Views: Creating Views-
helpers,
Controller: Creating
Controller variables and
SYLLABUS
FOR
Computerized Accounting & Office
Procedure
Duration : One Year
Time : 2 Hours Daily
Eligibility : 10 th Passed
Course Fee : Rs. 13200/- Plus Service
Tax
SYLLABUS FOR COMPUTERIZED ACCOUNTING & OFFICE PROCEDURE
(NSIC - ONE YEAR COURSE 2014)
MODULE-1
Month 1:
Introduction: Meaning, Definition & Object of Accounting, Accounting Vs. Booking, Accounting Principles & Procedure, Nature of various Accounts Books. Prepare journal, format of journal. Different types of journal entries. Format of ledger. Prepare ledger accounts. Posting of journal entries into ledger. Posting from various books journal ledger.
Month 2:
Prepare Trial Balance from various balance of account. Cash Book: Meaning, Advantage, Feature of cash book, List of financial books, Kinds of cash book. Petty cash book: Kinds of petty cash book.
Practical:- Different Vouchers, ledger Book, Computer typing, Introduction of Tally creation and alteration
of company, ledger, journal entries, Cash Book, Trial balance etc.
Month 3:
Explain Various Subsidiary Books of account. (Purchase book, Sale book, Purchase return book, Sale return book, Bills Receivable book, Bills payable book). Financial statement (Final account)- Trading accounts, Preparation of trial balances & various financial statement such as trading , profit & loss A/C, income & exp. A/C & balance sheet. Final Account With Adjustment. Practical:- Inventory information, Creation of Stock group, stock item , Price level , Record Purchase order, Sale order ,Debit and Credit note, Final Accounts.
MODULE- 2 Months 4: Depreciation: Meaning, Characteristics, other related concept, Causes of depreciation, Method of computing depreciation. Accounting of fixed assets, Depreciation & maintenance of record. Bank Reconciliation Statement: Meaning, Cause, Need, importance of a bank reconciliation statement.
Practical:- Creation of cost centre ,B.R.S in Tally, Budgets, Multi Currency, MS-WORD.
Months 5:
OFFICE PROCEDURE & BUSINESS COMMUNICATION
MODERN OFFICE :-
What is an „office‟ ? The changing office scene, office functions, Basic function, Administrative management functions, Activities of modern office. Importance of office to business enterprises.
RECORDS MANGEMENT:-
Paperwork in the modern office, Data processing Records management, Filing,
Essentials of a good filing system, Classification & Agreement. Filing Methods, Visible record system, Centralized Vs. de-centralized filing.
Months 6:
BUSINESS COMMUNICATION Introductions to Business Communications. Essentials & Principle of business
communications. Non-verbal communication, Verbal communication Written correspondence, Email Understand the principles and theories involved in constructing business correspondence. Improve upon research skills.
Improve upon writing skills (grammar, spelling, MLA format, etc). Design, research, & write and effective resume letters & other business of correspondence. Layout or structure of business letter.
Ms-OFFICE:- Introduction and explanation of Ms-Word, Ms-excel.
MODULE- 3
Month 7:
Practical work on cash memo, ledger, and stock register, and prepare voucher under accounting system.
Ms-OFFICE:- Ms-power point, Ms-Access
Months 8 & 9:
BASIC CONCEPT UNDER INCOME TAX Income under the head profit & gains of business or profession and its computation.
Income under the head capital gain. Various exemption incomes. Deduction and collection of tax at source. Return of income. Various allowances and disallowances of tax.
MODULE-4
Months 10:
COMPUTERIZATION OF ACCOUNTING TRANSCTION.
SERVICE TAX- Why service tax,how service tax is paid. Various Services under service tax.
VALUE ADDED TAX- Input tax-Benefit of VAT in brief.Need for introduction VAT.Merits and Demerits of VAT.
What is input tax credit? (Lectures Delivered by Experts)
Practical:- Advance Tally vat, Service Tax, T.D.S , excise ,Pay Roll and P.O.S invoice etc.
Months 11:
Working with busy Accounting package-creation of company ,preparing accounting voucher, creation of ledger-single ledger, Multiple ledger etc.Vat Returns,Vat-15,Vat-16,Vat-17,C.S.T.-1 & E-Filling of Vat Returns.
Months 12:
PRACTICALE ON JOB TRANING BY PLACING IN DIFFERENT DEPARTMENTS. Personality Development and Effective communication: Students are also provided
training on personality, self development and also effective communication, Revision of full syllabus.
SYLLABUS
FOR
AIR CONDITIONING & REFRIGERATION COURSE
Duration : One Year
Time : 2 Hours Daily
Eligibility : 8 th Passed
Course Fee : Rs. 13200/- Plus Service
Tax
SYLLABUS FOR AIR CONDITIONING & REFRIGERATION COURSE
Module-I:
Unit-1:
Theory Practical
Importance off the trade in the Industrial and commercial field. Theoretical subjects to be taught. Achievement to be made.
Method of marking. Marking media. Simple marking & measuring tools & their use. Chisel hacksaw frame and blade type specification and use.
Files and drills types, specification. Use, care and safety Drilling speed, feed and coolants.
Induction training. Familiarisation with the Institute. Type off Practical Training to be followed. Workshop Safety.
Use of simple marking and measuring tools. Marking out as per Blue Print. Chipping flat, grinding chisel. Hack sawing to a line .
Filing flat, square round and profile. Drilling clear and blind hole. Counter sinking, counter boring, grinding drill bit.
Unit-2:
Theory Practical
Taps and dies-their specification, use and safety. Reamers type, specification use and safety.
Soldering and brazing. Different type of solder, composition and use of flux-their effect on metal method soldering and brazing.
Tapping clear and blind hole . Threading by die. Fitting stud and removing broken stud. Hand reaming and fitting dowel pin.
Soldering and brazing on sheet metal joints.
Welding tools and equipment-type specification and use. Safety method in welding. Method of gas welding gas used and flames adjustment.
Electrical work, power, and energy their calculation in simple
Welding tools and equipment care and safety. Setting oxyacetylene plant. lighting and adjustment flame-simple joint M.S.
Measuring of current voltage, power and energy by voltmeter. Ammeter, watt
electrical circuits. Type use and
meter and energy meter.
construction.
Unit-3:
Theory Practical
Types grades and sizes of insulated wire and cables their selection and use. List of material for wiring.
Refrigeration service tools-type specification and use. Refrigeration components. Type specification and use.
Fixing and connecting electrical switches, holders, fuses, plug sockets on T.W. board and testing .
Use of refrigeration service toss-care and safety.
Refrigeration principle system of refrigeration and application of refrigeration.
Cutting, bending and joining of copper tubing. Flaming Swaging and silver soldering.
Unit-4:
Theory
Vapour compression system- cycle of operation. Components and division of the system. Capacity of the system.
Practical
Identification of refrigeration system. Stripping components, care and safety.
Refrigeration compressor. Its function- mode of drive type of compression- classification and application.
Reciprocating compressor- name. Construction and function of component parts.
Dismantling reciprocating compressor. Checking component parts-valve plate reeds, piston, piston pin seal etc.
Servicing and testing compressor service valve. Shaft seal piston assembly and valve plate assembly etc.
Revision & Test Revision & Test
Module-II:
Unit-1:
Theory Practical
Reciprocating compressor- name. Construction and function of component parts
Hermetic compressor- its construction and application Advantage and disadvantage of open unit and hermetic unit.
Rotary compressor types, construction and application. Name and function of component parts.
Cutting gasket of compressor. Assembly of compressor parts- testing pumping effect.
Dismantling of hermetic compressor . Checking and servicing of components. Assembly of compressor and testing.
Dismantling of rotary compressors. Checking and servicing components parts. Assembly and testing.
Unit-2:
Theory
Condenser-its function, type and classification. Construction and application.
Evaporator- its function, type and classification and application. Thermal overload motor starting relay and capacitors, types, function, construction and application.
Practical
Servicing air cooled condenser and liquid receiver. Checking leak repair and testing.
Servicing evaporator, removal of oil from evaporator. Checking leak, repair and testing.
Checking thermal over load protector, motor, starting relays and capacitor. Servicing and testing.
Unit-3:
Theory Practical
Refrigeration control- function and type. Automatic, thermostatic and capillary control. Construction, operation and application.
High pressure, low pressure and oil failure switch-construction operation and application.
Solenoid valve, pilot control and suction regulating valve. Construction operation and application.
Refrigerated cabinet type and classification. Construction and application.
Checking automatic and thermostatic expansion. Valves and capillary tube. Servicing and testing.
Checking thermostatic switch, high pressure and low pressure switch and oil failure switch. Servicing and testing.
Checking solenoid valve pilot control valve and suction regulating valve. Servicing and testing.
Servicing refrigerated cabinet. Checking body inside liner and door liner. Repair defect.
Unit-4:
Theory
Thermal insulating material. Their type properties, use and safety.
Study of electric wiring diagram of refrigeration system of open and sealed unit.
Practical
Replacing thermal insulating material. Install body and door liners and door gasket. Adjusting door alignment.
Electric wiring of refrigeration system open and sealed units.
Revision & Test Revision & Test
Module-III:
Unit-1:
Theory Practical
Vacuum pump, vacuum, gauge, and leak detectors, their type specification, use , care and safety.
Refrigerants- their desirable characteristics.
Fresno group refrigerants. Their properties and use. Care and safety in handling refrigerant.
Testing leak in the system using dry air, carbon- DI-oxide nitrogen. Vacuum zing and drying the system using deep vacuum pump, micron gauge etc. Charging gas in the system. Study of gauge readings.
Testing leakage in the refrigeration system. Using halide torch electronic leak Decatur. Repair leakage and testing.
Unit-2:
Theory Practical
Absorption type . Refrigerator- its principle, construction and application.
Refrigerator-different types- their type function and use trouble diagnoses and remedies. Repair & Maintenance of Hot & Cold Water Dispenser.
Servicing absorption type refrigerator checking component adjusting K. oil burner, repair/ replace heating elements and testing.
Checking compression type refrigerator and different type fault finding, servicing and testing.
Refrigerator- different types-their type unction and use. Trouble diagnoses and remedies.
Checking compression type refrigerator and different type fault finding servicing and testing.
Unit-3:
Theory
Window type air container-their type unction and application. Trouble diagnosis and remedies.
Practical
Checking window type air conditioner.
Window type air container-their type functions and applications. Trouble diagnosis and remedies.
Checking Window type air conditioner
Split Type & Multi type Air Checking Split type air conditioner
Conditioner- their type functions
and applications. Trouble diagnosis
and remedies.
Safety in handling refrigerant and cylinder. Colour code of cylinder method of refrigerant transfer.
Handling of gas cylinders. Repair leaky cylinder. Transfer of refrigerant.
Unit-4:
Theory Practical
Oil used in refrigeration system. Their desirable properties. Proper selection of refrigerant oil.
Water cooler and bottle cooler. Deep freezer: their type, function and use. Trouble diagnosis and remedies.
Servicing of Split Type Air conditioner Revision & Test.
Oil charging to compressor. Installing compressor, cooling coil and condenser of refrigeration unit.
Checking water cooler instantaneous and storage. Type and bottle cooler, deep freezer. Fault finding servicing and testing.
How to Service Split Type Air conditioner Revision & Test
Module-IV:
Unit-1:
Theory
Condenser- its type and capacity. Water cooled condenser their type construction and application.
Evaporative condenser- their function, construction and application.
Installation of Window type Air conditioner, AC stablizer installation & maintenance
Practical
Servicing of water cooled condenser and receiver. Checking leakage. Repairing and testing.
Servicing evaporative condenser checking , repairing and testing.
Practice of Installation of Window type Air conditioner
Unit-2:
Theory
Air conditioning comfort condition, factors influencing comfort- comfort chart. Installation of Split Air
Conditioner Installation of Split Air
Conditioner
Practical
Servicing and testing of air conditioning system and its control.
Practice of Installation of Split Air
Conditioner. Practice of Installation of Split Air
Conditioner
Unit-3:
Theory Practical
Bottle cooler and water cooler and their maintenance, trouble diagnosis and remedies.
Window air conditioner their maintenance trouble, diagnosis and remedies.Introduction to Standing
Repair and maintenance of bottle cooler and water coolers.
Repair and maintenance of window air conditioner.Installation of Standing AC.Repair and Maintenance of Standing
AC. Conctruction and applications. Revision & Test.
AC. Revision & Test
SYLLABUS
FOR
Certificate course in Mobile Repair & Mobile Software
Duration : 6 Months
Time : 2 Hours Daily
Eligibility : 8th Passed
Course Fee
: Rs. 10000/- Plus Service Tax
Certificate course in Mobile Repair & Mobile Software
Duration : Six Months Time : 2 Hours Daily
Course Fee: NIL-Sponsored Security Deposit : NIL
SYLLABUS
Month-1 (General Electronics-An Introduction)
Introduction to Electronics. Detailed Study of Different Electronics Components. Different Types of Tools Used to repair Electronics Components. Serial Circuits and Parallel Circuits. Band Electrons, Semiconductor Devices, Types of Semiconductor, PN Junction Diode, Blasting of Diode, types of Diode, Testing and their usage. NPN and PNP circuits. Introduction to Electronics basic characteristics. Construction of Electronic Eyes. Transistor, Transistor types Blasting of Transistor, Types of Transistor, testing of Transistor, Filter, Types of Filters. Introduction to ICs and types of ICs. Modulator and Demodulator. OHM‟s Law. Introduction to Power Supply and Study of Transformer. Type of Mobile Phone & Mobile Technology: Type of Mobile Phones. Basic Technology of Mobile Phone . Advance Technology of Mobile Phone. Introduction to GSM technology. Blue Tooth, Infrared , GPRS, SMS, MMS, Networking, N Series, Multimedia, VGA & Mega Pixel Camera, Speakers, Security, Computer Downloads, Accessories & Tools. Month-2
Electronics Component in Mobile Phone
Detailed Description and testing of the electronic components used in mobile phone like Resistance, Capacitors, coils, Transformer, Fillers, Crystal Oscillators, Diode, Transistors, Ics, CPU, Semiconductor Memory, Buzzer, Speaker, Battery used in mobile phone & Antenna etc. Study of Mobile Phone Printed Circuit Board
Initially the position of electronic components on the PCB will be discussed and thereafter practical of soldering de-soldering of SMD & BGA type Ics. Computerized Trouble Shooting Using Various Software . Study of various Tools , Softwares and Cables .
Practical Practical of soldering De-soldering of SMD & BGA type Ics. Computerized Trouble Shooting Using
Various Software , Knowledge of tools required for soldering and de-soldering. Used of blower, Houck etc.
Month-3 Repair of GSM Mobile Phone Technology Introduction to GSM technology. Block diagram and Working principles of Nokia as a base model. Description of various section like Antenna switch, Amplifier, Audio signal processing, Vibrator driving Circuit, LCD, Key Pad, SIM Card, Main Power Supply section. Study of Circuits board of various GSM Mobile Phones
Practical of soldering De-soldering of SMD & BGA type Ics. Computerized Trouble Shooting Using
Various Software , Knowledge of tools required for soldering and de-soldering. Used of blower, Houck etc.
Month-4
Introduction to CDMA Mobile Phone Introduction to CDMA Technology. Block diagram and Working principles of TATA Indicom as a base model. Description of various section like Antena switch, Aplifier, Audio signal processing, Vibrator driving Circuit, LCD, Krey Pad, Sim Card, Main Power Suppl section.
Study of Circuits of various CDMA Mobile Phones Study of Circuits of various GSM Mobile Phones, their features, Comparative study of various Mobile Phones, Repairing Details. Fault study and findings, Testing and Trouble shooting. Blue Tooth, Infrared , GPRS, SMS, MMS, Networking, Speakers, Security, Computer Downloads, Accessories & Tools.
Month-5
Fundamentals Of Computer System
Theory Types of computers, Computer Hardware, Soft wares, Firm wares Input & Output Devices, Primary and Secondary Storage, Fundamental of Computer , Types of Computer, Block Diagram Of Digital Computer and Computer System, Hardware, Software and Human ware. Digital Computer, Memory Structure, Primary Memory, Secondary memory. Windows Operating System .
Practical
Internet-Installation, Surfing, Email, Charting Meaning, Definition & Objects of Internet, WWW, Types of Internet, Difference between BroadBand, Dialup, WLL, Mobile Internet Service, Installation, Configuration, Surfing, Searching, Charting, Email, Download, Group Messaging, Site Properties etc. OS , MS-DOS, WINDOW-Me, WINDOW –XP, Internet Operation, E-mail, Reports &
Returns, Downloading etc.
Monthe-6
Computerized Mobile Phone Software Loading, Flashing & Reballing General Operating of Computers, Use of computers in mobile software, troubleshooting and practical. General operating of mobile phones. Blue Tooth, use of software troubleshooting Unlocking & Flashing of mobile phone through software, Down loading of Multimedia, Updating of Anti virus, mobile Software etc , country code unlocking, Upgrading existing software. Introduction to Mobile Phone Technology(CHINESE MAKE) Introduction to Chinese GSM technology. Block diagram and Working principles of Chinese base model. Description of various section like Antenna switch, Amplifier, Audio signal processing, Camera and Multimedia section , mike and speaker sections.
Personality Development & Effective Communication : Students are also provided training on Personality, Self development and also effective communications. Industrial Training, Examination, Evaluation, Feedback , Certification and valediction.
SYLLABUS
FOR
Welder course
Duration : One Year
Time : 2 Hours Daily
Eligibility : 8 th Passed
Course Fee : Rs. 13200/- Plus Service
Tax
SYLLABUS FOR WELDER ( GAS AND ELECTRIC) – ONE YEAR
Week Practical Theory
wise
Schedule
1 Introduce Training: Familiarization with General discipline in the institute the institutor importance of Trade Training Elementary First Aid importance of machinery used in the Trade. Introduction welding in Industry-Safety in Manual
to safety Equipment and their uses etc. Metal Are Welding–Safety in Oxy– Setting up of Are and as Apparatus Acetylene Welding and cutting Lighting and adjustment of flame Striking making and Measuring tools Materials
and arc. preparation method.
2 Fusion run with and without filler rod. Gas welding hand tools uses-care and M.S. Plate 2mm position. maintenance various welding processes. Their classification and
their applications.
3 Straight line beads on M.S Plate M.S Plate Different process of metal joining-
10mm position F. Bolting –Reverting-Soldering-Brazing etc.
4 Butt Weld square Butt joint on M.S sheet. Oxy-Acetylene Cutting Equipment- M.S sheet 3mm position F. Principal and Application their care and maintenance.
5 Weaved bead on M.S Plate M.S Plate Simple electrical terms and their 10 mm position F. definitions- uses of Electricity as applied to welding- Electricity-AC-
DC-Types of Electric Welding and
Applications.
6 Oxy-Acetylene hand cutting on M.S Plate Common gases used for welding- Straight and Bevel. Oxygen-Acetylene LPG type of Oxy- Acetylene flames. Their setting uses
variousgascombination Flame
Temperatures and their uses states of
matter.
7 Fillet weld lap joint on M.S Plate. Plate Nomenclature of welding joints terms 5mm position F. Butt weld in open square applied to each joint explanation with Butt joint. M.S Plate 5mm position F. Butt simple sketches-Welding symbols-
weld single V- Butt Joint M.S Plate Description and uses. Edge
10mm position F. preparation application.
8 Fillet weld Tee joint M.S Sheet 2 mm Chemistry and structure of Oxy- Position F. Fillet weld Outside Corner Acetylene Flame. Manufacture or joint. M.S Sheet 2mm Position F. CalciumCarbide-Qualitycontrol
properties-Its impurities Effect of each
element on metals.
9 Fillet weld Tee joint M.S Sheet 2 mm Chemistry and structure of Oxy- Position F. Fillet weld Outside Corner Acetylene Flame. Manufacture of Joint M.S Sheet 2 mm Position F. Calcium carbide-Quality control
Properties-Its impurities. Effect of
each element on metals.
10 Straight line Beads on M.S Plate M.S Principle of Arc Welding-Necessity of Plate 10mm Position H. Welding Machines-types of machine Construction Advantages and
disadvantages of each machine – Care and maintenance.
11 Butt weld single butt joint MS plate 12 Acetylene-its properties Acetylene mm Right hand welding Technique Generators. Carbide to water type Position H. Fusion Run with filler rod on Working Principle care and
M.S Sheet. MS Sheet 8.15mm Position H. Maintenance water to carbide type
working principle care and
maintenance Comparison of two types
of generators. Acetylene purifier
Hydraulic back pressure valve.
12 Butt weld Single Vee Butt joint on MS Arc and its characteristics are length plate. MS Plate 10mm position H. Straight types uses advantages and line bead Vertical Upward MS disadvantages.
Plate10mm.
13 Achievement: Should be able to weld Polarity –Types –method of joints uniformly to a length of not less than identification uses of each type 15cm gas and Arc Welding Respectively. importance and indication of wrong
polarity.
14 1. Marking out on MS Plate or Flat. Safety precaution in fitter shop steel 2. Filing square to dimensions. rule types and its uses punches types and its uses. Try Square Scriber its
Function.
15 3. An edge chipping and cutting Chisel types and construction hacksaw 4. Hacks awing. Frame Hacksaw Blades its types. Files parts types. and uses hammer types-
parts and its uses. Vices and Clamps
their types.
16 Fillet Weld Inside Corner joint MS Sheet Oxygen its properties manufacturing 2mm Position H. methods oxygen cylinder D.A. Cylinder description method of
charging care and maintenance.
17 Laying Weaved Beads Vertical upward Welding Positions Flat horizontal MS Plate 10mm position V. vertical and over head Slope.
18 Laying weaved Beads Vertical upward MS And Rotation. Electrodes Types Plate 10mm Position V. objects of Flux coating Characteristics
of Flux I.S –BS. A W S .Specification. criteria for choice of electrode
19 Butt-weld Square Butt MS Sheet 2 mm Regulators types construction and Position H. uses. Care and maintenance Welding Blow pipes types Description
operation Construction uses care
Maintenance Difference between H.P
& I.P. System.
20 Fillet Weld Lap Joint MS. Plate 10 mm Effect of moisture on electrodes Position V. Upward. Fillet Weld Outside necessity and importance of banking Corner joint MS Plate 10 mm Position V electrodes before use storage
Upward. conditions and handling of electrodes
for better welding quality.
21 Fillet weld lap joint. MS. Sheet 2mm Faults in gas welding definition of Position V. faults. Their effects - causes - Fillet weld Tee joint. MS sheet 2mm corrections manifold system necessity
position. - operations - limitation care and
Fillet weld outside corner joint MS sheet maintenance.
2mm position V.
22 Butt Weld\Single Vee But Joint MS Plate Arc Blow-Definition –its causes and 10 mm position V upward straight line effects-Methodstoovercomein beads on MS Plate. MS Plate 10mm practice-faults in Arc Welding –
Position OH. Definition–Effects. Causes and Correction of each fault.
23 Butt Weld-Square Butt joint MS Sheet 2 Welding Techniques- Right Hand- mm Position V. Fusion run with filler rod. Left Hand Explanation Method-
MS Sheet. application – Lined welding- MS Sheet 2 mm position OH. Application.
24 Fillet Lap joint MS Plate 10mm Position Distortion in Arc Welding Causes and OH .Butt Weld Single Vee Butt Joint Ms effects methods employed to minimize Plate 2mm Position OH. its effects.
25 Marketing cutting. Differentangles. Sheet metal Shop safety rules- Shapes (Geometrical) on cutting notches. Measuring tools-making tools- Sheet Metal sheets. Making a Cylinder, Square, Metal Hammers Pullers- mallets, Pun
rectangular shapes. Different sheet metal chess grooves-River set and uses-
joints and soldering practice. Types of sheets and uses soft solder
and soldering process.
26 Taper Tray But joint-Soldering Practice Development of parallel line method Elbow joints pipe joints Tee Pipe Equal .Examples Taper Tray and different and unequal pipes. elbow and T pipes Hand lever shears-
Guillotine shearing machine parts.
Description uses Nibbling shearing
machine parts and uses.
27 Fillet Weld Tee joint MS Sheet 2mm Methods employed to control
Position OH. distortion in gas welding – stress relieving outer methods edge preparations Methods applications.
28 Fillet weld pipe flange joint ( circular Welding of MS pipe Difference cutting ) on MS plate 6mm MS pipe 50mm between pipe and plate welding pipe dia. Wall thickness 3mm position IG development 90 degree and 45 degree
( rolling) pipe Butt Weld butt joint on MS branch pipe. Pipe welding position
pipe 75mm OD 6mm Wall thickness. 16,26,56,66 procedures of pipe
welding.
29 Pipe butt joint on MS pipe. MS pipe 50mm Specifications for filler rods and wires dia. 3mm wall thickness, position IG for gas welding effect of atmosphere (rolling) Pipe L joint MS pipe 50mm dia on metals. Uses of gas welding flux
3mm WT position F. Pipe 90 degree TEE and roots for different methods effect
joints MS pipe 25 mm dia 2mm WT of alloying elements on weld ability.
position F.
30 Fusion welding of cast iron maintenance Cast iron determination of weld ability work (only demonstration ) position F. preheating methods choice of methods Bronze welding of cast iron broken parts of welding (Arc) Bronze welding of
position F. cast iron its limitations.
31 Fusion welding of cast iron Butt weld. Fusion welding of cast iron bronze Cast iron blocks 105*50*10 or position F. welding of cast iron determination of Bronze welding of cast iron Butt weld. weld ability.
Cast iron block 150*50*10 position F.
32 Butt weld copper square butt joint copper Welding of copper properties weal sheet 105*50*3.15mm bronze electrode ability methods preheat and post heat position F. finishing of weld effect of alloying
element.
33 Fusion welding of copper butt joint copper Welding of copper by gas procedure sheet 105*50*3.150mm position F. Bronze finishing of weld. Welding of copper welding of copper sheet 150*50*3.15mm .Bronze welding process finishing of
position F. welding.
34 Hard facing on MS round rod. Micro flow Conversation of metallic resources metal spraying cold and hot process MS welding repairing need of the hour round 105*50*3mm dia. Position F - Advantage of low heat input alloys
Repairing of broken machine parts by in weld repair powder welding
using low heat input electrodes. iridology ( wear and tear )
- Hard surfacing electrodes uses.
35 Fusion welding of brass butt weld. Brass Classification of sheet welding of high sheets 3.15mm position F. Butt weld of carbon steel low and medium alloy stainless steel square butt joint. Stainless steels limitations preheating and inter
steel sheer 2 or 3mm position F. poses temperature of plate for such alloys during welding. Welding
stainlesssteels– Lades- Edge preparation method of welding.
36 Welding of stainless sell. Butt weld square Welding of aluminum edge butt joint. Stainless steel sheet 3.15 mm preparation flame and angle of blow Position F. Arc Gouging with Electrodes pipe and filler rod preheating welding
MS Plate 12 mm By using Carbon of cast aluminum preheating
Electrodes. determination of preheating technique
of welding.
37 Butt weld square butt joint on aluminum. Arc cutting of mild sheet selection Aluminum sheet 3.15mm position F. methods. Arc cutting equipment arc Brazing of copper to brass tube. ( Bell Gouging and its application types of
Mouth Joint ). Copper tube and brass tube Arc cutting electrodes.
2.5 mm Od x 2mm WT. Position F.
38 ACHIVEMENT: The trainees should be Arc cutting of mild sheet selection able to weld ferrous and non ferrous methods. Arc cutting Equipment arc metals to a reasonable standard. gouging and its application Types of
Arc cutting electrode, Air Arc cutting
and its application.
39 Producing jobs as per drawings. (Jobs Welding of dissimilar metals choice of involving all position welding) methods. Application of each method limitation. Different flame cutting
machines and cutting of quality care
and maintenance.
40 Silver Brazing of copper to stainless steel Resistance welding principle of tube 12mm dia. Oxy Acetylene Machine resistance welding types. Application, cutting. Oxy-Acetylene flame gouging advantages laser beam. Welding and
removing welds. cutting principle of laser beam
description of equipments.
41 Producing jobs as per drawing such as Modern welding process submerged furniture items. Windows Grills. Arc welding principle of the process equipment used weld procedure
advantages limitations. Electro Slag
Welding weld procedure advantages
limitation.
42 Producing jobs as per drawing such as Inspection and testing of weld furniture items. Windows Grills. Destructive non destructive test semi destructive explanation of each
method. Termite welding economy in
welding simple weld estimation.
43 Producing jobs as per drawing such as Introduction to TIG welding TIG furniture items. Windows Grills. welding Equipments Advantages of TIG Welding Process over Manual
MetalArcWeldingandOxy
Acetylene Welding Process.
44 Fusion Runs without filler rod on Power sources for TIG Welding types Aluminium, Aluminium Sheets 3mm Applications care and maintenance Position F. Fusion Runs with Filler Rod high frequency unit parts construction
on Aluminium sheets 3mm position F. andusesD.C.suppressorunit construction application care and
maintenance Tungsten Electrodes.
Types size uses.
45 Fillet weld lap joint on Aluminium. Argon Gas-Properties-Uses-Ceramic Aluminium Sheet 3mm Position F. Fillet shield Defects-Causes and correction WeldTEEjointonAluminium. in TIG Welding Types of polarity and
Aluminium sheet 3mm position F. Butt its applications.
Weld Square Butt joint on Aluminium.
Aluminium sheets 3mm Position F.
46 Fillet Weld Outside corner joint on Date/Tables for TIG Welding. Aluminium. Aluminium sheet 3mm
Position F.
Butt weld-Square Butt joint on aluminiu
pipe. Aluminium pipe 50 mm dia x 3mm
WT. Position F.
Fusion Run Without filler rod on stainless
steel sheet stainless steel sheets -2 mm
position F.
47 Fusion Run with filler rod on Stainless Introduction to CO2 Welding
steel sheet stainless steel saheet-2mm (Introduction to Industrial training)
position F. Filled weld lab joint on. CO2 WeldingEquipmentand
Stainless steel sheet stainless steel sheet accessoriesDescriptionofCO2 2mm position F. welding set with diagram.
48 Butt weld –square Butt joint on stainless Mode of metal transfer in CO2 steel tube. welding.Diptransferorshort Stainless steel tube 30 or 40 mm O.D X circuiting transfer spray transfer (free
3mm WT. Position F.-outside corner joint. fight) Globular Transfer (intermittent).
Stainless steel Sheet 2mm Position F. Steel
weld square Butt joint stainless steel sheet 2mm Position F.
Butt weld –square Butt joint on stainless steel tube.
Stainless steel tube 30 or 40 mm O.D X
3mm WT. Position F.
49 Butt weld on M.S .Pipe .MS Pipe50 mm Welding wires used in CO2 Welding ODX3mmWT.PositionIG .Its composition .Diameters. (Rolling)Fillet TEE joint on MS pipe Applications .Various Gas Mixtures
50mm OD X 3mm WT. and its applications in CO2 Welding wire feed system types applications limitations- Care and maintenance.
50 Pipe Elbow Joints on MS Pipe MS Pipe Tables /Date related to CO2 welding. 50mm OD X3 WT. Position F. Information on solid flux cored wires.
51 Straight line beads on MS Plate 10mm Electron Beam Welding-Principle of Position F Fillet weld TEE Joint on MS the process description of equipment- Flat 50 X 12 mm Position F. application of the process advantages
Fillet Weld TEE joint MS Flat 50 X 12 over the metallic Arc Welding
mm Position F. limitations.
52 Fillet weld lap joint .MS Flat 50 X 12mm Friction welding-principle of the Position F. Straight line Beads in process description of the equipment- horizontal position MS Plate 10mm. Fillet application of the process advantages weld TEE Joint. MS Flat 50 X10mm over the metallic Arc Welding
position H Preparation for trade Test. limitations. Arc Brazier –principle of Trade Test. theprocessdescriptionofthe equipment-application of the process
advantages.
SYLLABUS
FOR
DIPLOMA IN FASHION DESGINING
Duration : One Year
Time : 2 Hours Daily
Eligibility : 8 th Passed
Course Fee : Rs. 13200/- Plus Service
Tax
Module 1 Introduction of Fashion
Knowledge of Basic Fashion Terminology
Role of Colour Combination in Dresses
Identification of Fabric, Yean & Grain Line
Study of Body Types
Visual Design in Dress
Module 2 Introduction to Garments Construction Introduction to Sewing Machines, Over Lock Machine & Pressing Basic Sewing Machine Techniques for Fashion Style Practical of Basic Stitches Relation of Needle & Thread with Fabric Application of Decorated Stitches Variation of Embroidery Work like Zardozi, Bead & Mirror works etc. Different types of Seams, Tucks, Pleats & Gather
Module 3 Introduction of Basic Sizing & Specification Sheet Techniques of Measurements Principle of Pattern Making Drafting, Pattern Making, Cutting & Stitching of Baby Bib, Feeder & Jhabla Theme of Colour Combination in Baby Garments Children Basic Body Block for Making Different types Children Garments
Module 4 Basic Body Block & Skirt
Dart Manipulation of Body Blocks
Variation of Skirts
Basic Sleeve Block
Manipulation of Basic Sleeve
Module 5 Sketching of Ten Head Fashion Figure
Dimension of Figures
Drawing features, Hands & Legs
Drawing of Body Proportion
Colour Rendering
Module 6 Understanding of Dress Form & Human Body
Cutting & Handling of Fabric Variations of Necklines
Basic Ladies Kurta Variation of Kurta(Punjabi, Princess Line, Angrakha etc.) Variation of Kalidar Kurta Basic Ladies Salwar
Variation of Salwars Variation of Churidar Payajami Anarkali Suit
Module 7 Basic Collar Pattern & Variation
Collar Attachment for Shirt
Zip Attachment in Dresses
Waistband Attachments
Pocket Stitching Basic Facing
Module 8 Introduction of Painting & Printing
Colour fasting & Colour Combination
Free Hand Painting
Block Printing & Setting
Spray & Stencil Painting
Tie & Die
Washing & Pressing for printed/painted Fabric
Module 9 Introduction of Quilting Variation of Quilting:- Bags, Bad Cover, Cushion Cover, Baby Bedding etc Use of Quilting in Garments Quilting with Patch work Finishing of Quilting Industrial use of Quilting
Module 10 Material Selection & Techniques
Highlighting & Communicating Special Skills
Ideas for Market Analysis
Costing & Pricing of Garments
Branding & Packaging
Module 11 Ideas for Market Analysis
Costing & Pricing of Garments
Branding & Packaging
Module 12 Training on Personality, Self Development & Effective Communications Revision & Final Test