Phoenix Contact COMBICON 19 Inch - 19' Technology for · PDF file516 PHOENIX CONTACT COMBICON...
Transcript of Phoenix Contact COMBICON 19 Inch - 19' Technology for · PDF file516 PHOENIX CONTACT COMBICON...
Inhalt 9 kaliert7% Breite s
516 PHOENIX CONTACT
COMBICON 19 inch 19" technology for MCR technology
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
517PHOENIX CONTACT
Plug-in card blocks SKBI
Thanks to the SKBI plug-in card blocks for connectors as per IEC 60 603-1 / DIN 41 617 and IEC 60 603-2 / EN 60 603-2, single European-format cards and double European-format cards can be installed everywhere in the control cabinet and easily wired using a screw connection. The printed circuit board is reliably supported in the robust insulation housing and is automatically held in position by engagement catches which prevent it from falling out. The easy-to-operate ejectors make it simple to release the printed circuit board, even in narrow spaces.
SFLY/FRONT-SFL screw-type socket strips
The SFLY and FRONT-SFL socket strips with a screw connection at the rear have been developed for use in 19" racks. They are suitable for 32-position male connectors in accordance with IEC 60 603-2 / EN 60 603-2 of the types D and F. The special feature of the Y-shaped SFLY screw-type socket strip is the angled arrangement of terminal blocks. In addition to convenient handling and a clear view during connection, the conductors can be laid in this "cable duct" without further space requirements.
Socket strip with spring-cage connection FRONT-ZFL 1,5/...
The FRONT-ZFL 1,5 D32 socket strip with a spring-cage connection at the rear has been specially developed for use in 19" racks. The installation dimensions and the labeling of individual terminal points fulfill the requirements of IEC 60 603-2 / EN 60 603-2 for type D32.
COMBICON 19 inch 19" technology for MCR technology
General 518
Plug-in card blocks SKBIfor connectors as per IEC 60 603-1/DIN 41 617 and IEC 60 603-2/EN 60 603-2
520
SFLY screw-type socket stripsfor male connectors as per IEC 60 603-2 / EN 60 603-2
532
Socket strips with a FRONT-ZFL spring-cage connection for connectors as per IEC 60 603-2 / EN 60 603-2FRONT-ZFL socket strip
533
FRONT-SFL screw-type socket strips 534
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
31-pos.
B
C
D
E
F
G
H
COMBICON 19 inchPlug-in card blocks SKBI
General
Industrial electronics is advancing further and further into conventional control systems. This is happening mostly with printed circuit boards with the European format 100 x 160 mm.
Increased safety requirements and the higher density of components and connections accelerate the trend towards the indirect contacting principle with male connectors in accordance with IEC 60 603-1/DIN 41 617 and IEC 60 603-2/EN 60 603-2.
Plug-in cards are normally grouped together in the electronic racks of 19″ cabinets. Although such a rack is practical for many printed circuit boards, it is costly– When only one, two or three cards are
installed and connected– When the printed circuit board is
installed decentrally, thereby saving wiring within the control cabinet, or
– When older systems are subsequently modernized by adding one or two electronic cards
A rack is costly, voluminous and only accessible from the rear or with the aid of a complex swing frame. In addition, connections can often only be made using the Wire-Wrap® or TERMI-POINT®
connection methods, which are not suitable for heavy currents.
These disadvantages are overcome by the Phoenix SKBI plug-in card blocks. With the aid of these blocks, single or double European-format cards can be installed at any position in the control cabinet and can be connected using simple screw connections.
The printed circuit board is reliably supported in the sturdy insulating housing and automatically protected against vibrations by two engagement catches after insertion. The easy-to-use ejectors make it simple to release the printed circuit board even in narrow spaces.
Connectors in accordance with IEC 60 603-1/DIN 41 617 and IEC 60 603-2/EN 60 603-2
With the introduction of the European-format 100 x 160 mm, the 31-position male connector in accordance with IEC 60 603-1/DIN 41 617 became common at the beginning of the 1960s as an indirect connector. The exposed, round pins in a metric 5 mm zig-zag layout are characteristic of these connectors.
The rapid development in industrial electronics, i.e. the increasing packing density of electronic components on the printed circuit board, required greater numbers of contact pins. Moreover, safety requirements were designed for increased protection of the contact pins against mechanical damage and dirt. These requirements led to development of the connector in accordance with IEC 60 603-1/DIN 41 617.
All types in this range are based on the pitch dimension of 2.54 mm (one tenth of an inch). The seven vertical rows are marked from z to f; the individual pins of the lines from top to bottom are marked from 1 to 32. All contacts are gold-plated. The standards also require that connectors consisting of pin and socket strips from
different manufacturers should be compatible with each other.
In the course of time, two designs with different contact assignments have emerged.
518 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
b a c b a c a e c a d b z f d b z zf e d c z
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
f e d z
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
f e d z
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
b
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
f d b z f e c a
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
e c a
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
f e d c b a
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
Inhalt 9 kaliert7% Breite s
Series 2
COMBICON 19 inchPlug-in card blocks SKBI
Series 1Series 1 connectors are available both as
high-position devices with closely spaced contacts and 1 A current carrying capacity, and (for industrial power electronics) with a lower numbers of positions, a large 5.08 mm contact pitch and contacts capable of carrying up to 4 A.Type B
This 64-position connector results from the complete use of rows a and b. The contacts are dimensioned for a current carrying capacity of 1 A. The position spacing means that these connectors can be used for voltages up to 125 V in accordance with DIN VDE 0110/Gr. B. In the 32-position version, only the even positions are used.Type C
Adding row c results in this 96-position connector. If only the two outer rows a and c are used, type C 64 results as an alternative.
If this is further reduced to just the even-numbered positions of rows a and c, type C 32 with a 5.08 mm horizontal and vertical spacing of the 1 A contacts results. A nominal voltage of 250 V is achieved, in accordance with DIN VDE 0110 Gr. C.
Type DThis connector has the same dimensions
and the same contact arrangement (even-numbered positions in rows a and c) as type C 32. The only difference is the reinforced contacts, which are capable of carrying a current of up to 4 A.Type E
Adding rows d and e to type D 32 results in the 48-position connector with 4 A contacts in a 5.08 mm pitch. This means that all even-numbered positions in rows a, c and e are occupied.
Series 2In the connectors in series 2, the pitch of
the rear connections in both directions is 5.08 mm. The row spacing on the plug-in side is just 3.81 mm. In addition, the creepage distances to ground are increased by raising the housing at the rear, which results in a different wiring level from that of series 1.
All contacts are capable of carrying up to 4 A. For this reason, connectors of series 2 are mainly used in industrial electronics applications.
The mounting hole is almost precisely in the center of the strip. This is achieved by a trick: A further contact row z is added in front of row a. (This comes from regarding the alphabet as a closed ring and counting backwards from a.)
Type FIn addition to the complete 48-position
design which uses all even-numbered positions in rows z, b and d, the DIN standard also includes a partially assembled 32-position version in rows z and b. Occasionally (to ensure larger mutual insulation distances), the positions in rows z and d may also be used.Type G
This design results from adding the pitch rows e and f, while still using only the even-numbered positions in the pin assignment.Type H
These 11 or 15-position high current strips have the same dimensions as the types C and F. However, they are distinguished by a different plugging geometry and the reinforced contacts with a current carrying capacity of 15 A.
Other typesIn addition to the strips equipped with
the same type of contacts, there are also mixed types, e.g. H 7/F 24, shortened types such as C 1/2 and the inverted type R. All these, however, play a secondary role in practical industrial applications.
More details available on request.
519PHOENIX CONTACT
IEC 60 603 /
DIN 41 617
31-pos.
B
Max. 64-pos.
C
Max. 96-pos.
D
Max. 32-pos.
E
Max. 48-pos.
F
Max. 48-pos.
G
Max. 64-pos.
H
Max. 15-pos.
Series 1
Pitch 5.0
Pin 1 mm ∅Current 5 A
Pitch 2.54
Knife
0.7 x 0.6
Current 1 A
Pitch 5.08
Knife
0.7 x 0.6
Current 1 A
Pitch 5.08
Knife
1 x 0.6
Current 4 A
Pitch 5.0
Knife
1 x 0.6
Current 4 A
Pitch 5.08
Knife
1.5 x 0.6
Current 4 A
Pitch 5.08
Knife
1.5 x 0.6
Current 4 A
Cutter
4.8 x 0.8
Current 15 A
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
31
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
105
112
4,2
25
,5
43
12
9
17
0
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, 31-pos., for indirect connection in accordance
with IEC 60603-1/DIN 41617, including guide rails, engagement
catches and ejector, with standardized marking on both connection
sides, as well as M4 mounting screws
SKBI 31 2201519 1
Snap-on foot, for horizontal or vertical mounting of the blocks on
the 3 DIN rail
SF-SKBI 31/32 2261009 10
Keying pin, plastic, is subsequently inserted into a contact of the
SKBI, color: red
CS-SKBI 2204082 100
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10
Technical data
General data
Pitch 5 mm
Pin diameter 1 mm
Voltage 250 V
Current 5 A
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
SKBI 31
PWidth 112 mm
520 PHOENIX CONTACT
The 31-pos. plug-in card block for European-format cards with indirect connection in accordance with IEC 60603-1/DIN 41617
PCBs with 31-pos. connectors in accordance with IEC 60603-1/DIN 41617 with a characteristic zig-zag layout of the round pins are still widely used.In the plug-in card block SKBI 31, the pins make contact with gold-plated fork springs, which are floating, i.e. mechanically decoupled from the terminal point. In this way, the contact resistance becomes very stable and is less than 2 mΩ.
In order to prevent incorrect insertion of the PCBs and the plug-in card blocks, specific contact pins are cut off and the corresponding contact holes are closed with CS/SKBI keying pins.
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
521PHOENIX CONTACT
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
ac
ac
13
8
18
1
19
3
4,2
25
,5
43
105
112
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, 32-pos., for indirect connection in accordance
with IEC 60603-2/EN 60603-2, including guide rails, engagement
catches and ejector, with standardized marking on both connection
sides, as well as M4 mounting screws
SKBI 32/C 2261038 1
Snap-on foot, for horizontal or vertical mounting of the blocks on
the 3 DIN rail
SF-SKBI 31/32 2261009 10
Keying pin, plastic, is subsequently inserted into a contact of the
SKBI, color: red
CS-SKBI 2204082 100
Technical data
General data
Pitch 2.54 mm
Knife dimensions 1 x 0.6 mm
Voltage 250 V
Current 4 A
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
522 PHOENIX CONTACT
SKBI 32/C
PWidth 112 mm
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
The 32-pos. plug-in card blocks for European-format cards with indirect connection in accordance with IEC 60603-2/EN 60603-2
The three blocks in this series of models permit accommodation of PCBs with male connectors of C, D, and F types in accordance with IEC 60603-2/EN 60603-2. The blocks are labeled according to the standard and have spring-loaded engagement catches, which, however, do not act as ejectors.
Type C and D
Type F
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
c
ac
a
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32 32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
zb
zb
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
z
z
P
P
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SKBI 32/D 2261054 1 SKBI 32/F/ZB 2261096 1 SKBI 32/F/ZD 2261106 1
SF-SKBI 31/32 2261009 10 SF-SKBI 31/32 2261009 10 SF-SKBI 31/32 2261009 10
5.08 mm 5.08 mm 5.08 mm
1 x 0.6 mm 1.5 x 0.6 mm 1.5 x 0.6 mm
250 V 250 V (in acc. with DIN VDE 0110/Gr.B) 250 V (in acc. with DIN VDE 0110/Gr.B)
4 A 4 A 4 A
8 mm 8 mm 8 mm
M3 M3 M3
0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm
0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
523PHOENIX CONTACT
SKBI 32/D SKBI 32/F/ZB SKBI 32/F/ZD
P P PWidth 112 mm Width 112 mm Width 112 mm
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
32
28
24
20
16
14
12
10
8
6
4
2
5
7
9
11
13
15
23
27
ca
a c
3
1
25
19
17
30
26
22
18
29
31
a
c
c
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
31
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
a
21
16
218
5
19
7
4,2
5566
111
118
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, 64-pos., for indirect plugging in accordance
with IEC 60603-2/EN 60603-2, complete with guide rails,
engagement catches and ejector, with standardized marking on
both connection sides, as well as M4 mounting screws
SKBI 64/B64 2263023 1
Snap-on foot, for horizontal or vertical mounting of the blocks on
the 3 DIN rail
SF-SKBI 64 2263007 10
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10
Technical data
General data
Pitch 2.54 mm
Knife dimensions 0.7 x 0.6 mm
Voltage 125 V (in acc. with DIN VDE 0110/Gr.B)
Current 1 A
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
524 PHOENIX CONTACT
SKBI 64/B64
PWidth 118 mm
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
The 64-pos. plug-in card blocks for European-format cards with indirect connection in accordance with IEC 60603-2/EN 60603-2
These plug-in card blocks have double-level screw connection terminal block rows on both sides. The offset arrangement of the levels improves the conductor accessibility and the legibility of labels. The robust overall design of the block ensures sturdy support for heavy PCBs as well. These are held in place by engagement catches with an ejector that can be operated from the front.
Type B, C, D, E
Type F and G
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
32
28
24
20
16
14
12
10
8
6
4
2
6
8
10
12
14
16
24
28
ca
a c
4
2
26
22
20
18
30
26
22
18
30
3232
28
24
20
16
14
12
10
8
6
4
2
5
7
9
11
13
15
23
27
ca
a c
3
1
25
21
19
17
30
26
22
18
29
31
a
a
c
c
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
31
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SKBI 64/C32 2265034 1 SKBI 64/C64 2263036 1
SF-SKBI 64 2263007 10 SF-SKBI 64 2263007 10
SZS 0,6X3,5 1205053 10 SZS 0,6X3,5 1205053 10
2.54 mm 2.54 mm
0.7 x 0.6 mm 1 x 0.6 mm
250 V (surge voltage category III/contamination class 2) 125 V (in acc. with DIN VDE 0110/Gr.B)
1 A 4 A
8 mm 8 mm
M3 M3
0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm
0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
525PHOENIX CONTACT
SKBI 64/C32 SKBI 64/C64
P PWidth 118 mm Width 118 mm
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
32
28
24
20
16
14
12
10
8
6
4
2
ca
a c
30
26
22
18
16
218
5
19
7
4,2
5566
111
118
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, 64-position, for indirect connection in
accordance with IEC 60603-2/EN 60603-2, complete with guide
rails, engagement catches and ejector, with standardized marking
on both connection sides, as well as M4 mounting screws
SKBI 64/D32 2265050 1
Snap-on foot, for horizontal or vertical mounting of the blocks on
the 3 DIN rail
SF-SKBI 64 2263007 10
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10
Technical data
General data
Pitch 5.08 mm
Knife dimensions 1 x 0.6 mm
Voltage 250 V (surge voltage category III/contamination class 2)
Current 4 A
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
526 PHOENIX CONTACT
SKBI 64/D32
PWidth 118 mm
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
Type B, C, D, E
Type F and G
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
32
28
24
20
16
14
12
10
8
6
4
2
ea
a e
30
26
22
18
c
c
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
dz
z d
32
28
24
20
16
14
12
10
8
6
4
2
30
26
22
18
b
b
32
28
24
20
16
14
12
10
8
6
4
2
30
26
22
18
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
fz
z f
32
28
24
20
16
14
12
10
8
6
4
2
30
26
22
18
b
b
d
d
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
32
28
24
20
16
14
12
10
8
6
4
2
30
26
22
18
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SKBI 64/E48 2264080 1 SKBI 64/F48 2264093 1 SKBI 64/G64 2263117 1
SF-SKBI 64 2263007 10 SF-SKBI 64 2263007 10 SF-SKBI 64 2263007 10
SZS 0,6X3,5 1205053 10 SZS 0,6X3,5 1205053 10 SZS 0,6X3,5 1205053 10
5.08 mm 5.08 mm 5.08 mm
1 x 0.6 mm 1.5 x 0.6 mm 1.5 x 0.6 mm
250 V (surge voltage category III/contamination class 2) 250 V (in acc. with DIN VDE 0110/Gr.B) 250 V (in acc. with DIN VDE 0110/Gr.B)
4 A 4 A 4 A
8 mm 8 mm 8 mm
M3 M3 M3
0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm
0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
527PHOENIX CONTACT
SKBI 64/E48 SKBI 64/F48 SKBI 64/G64
P P PWidth 118 mm Width 118 mm Width 118 mm
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
30
30
26
26
22
22
18
18
14
14
6
6
10
10
32
28
24
20
16
16
12
12
8
8
4
4
dz
z d
32
28
24
20
16
218
5
4,2
55
66
111
118
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, with screw connecting terminal blocks MKDS 3
and H15 high-current socket for indirect control in accordance with
IEC 60603-2/EN 60603-2, complete with guide rails, engagement
catches and ejector, with standardized marking on both connection
sides, as well as M4 mounting screws
SKBI 64/H15-MKDS3 2269140 1
Plug-in card block, with screw connection terminal blocks MKDS 5
and H15 high-current socket strip for indirect plugging in
accordance with IEC 60603-2/EN 60603-2, complete with guide rails,
engagement catches and ejector, with standardized marking on both
connection sides, as well as M4 mounting screws
Snap-on foot, for horizontal or vertical mounting of the blocks on
the 3 DIN rail
SF-SKBI 64 2263007 10
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10
Technical data
General data
Knife dimensions 4.8 x 0.8 mm
Voltage 250 V (surge voltage category III/contamination class 2)
Current 15 A
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
528 PHOENIX CONTACT
SKBI 64/H15-MKDS3
PWidth 118 mm
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
The 15-pos. plug-in card blocks for European-format cards with high-current socket strip H15 in accordance with IEC 60603-2/EN 60603-2
With these plug-in card blocks, single 19" power supply racks, e.g. switched-mode power supply units, can be mounted at any point in the control cabinet and easily wired with a screw connection. Every position of the H 15 high-current socket strip is assigned either two 2.5 mm2 MKDS 3 or one 4 mm2 MKDS 5 connection terminal block. The robust overall design of the blocks ensures sturdy support also for heavy PCBs. After insertion, these are automatically secured against vibrations with two engagement catches with an ejector that can be operated from the front.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
dz
z d
6
10
14
18
22
26
30
4
8
12
16
20
24
28
32
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.
SKBI 64/H15-MKDS5 2269153 1
SF-SKBI 64 2263007 10
SZS 0,6X3,5 1205053 10
4.8 x 0.8 mm
500 V (surge voltage category III/contamination class 2)
15 A
8 mm
M3
0.5 Nm ... 0.6 Nm
0.2 ... 6 mm² / 0.2 ... 4 mm² / 24 - 10
529PHOENIX CONTACT
SKBI 64/H15-MKDS5
PWidth 118 mm
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
16
218
519
76
6
55
4,2
4,2
245,4
252,4
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Plug-in card block, for indirect connection in accordance with IEC
60603-2/ EN 60603-2, including guide rails, engagement catches
and ejector, with standardized marking on both connection sides,
as well as M4 mounting screws with connector
SKBI 128-B64/B64 2268028 1
SKBI 128-C32/C32 2270032 1
SKBI 128-C64/C64 2268031 1
SKBI 128-D32/D32 2270058 1
SKBI 128-E48/E48 2269085 1
SKBI 128-F48/F48 2269098 1
SKBI 128-G64/G64 2268112 1
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053 10
Technical data
General data
Stripping length 8 mm
Screw thread M3
Torque 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
SKBI 128
PWidth 252.4 mm
530 PHOENIX CONTACT
Note:
Current and voltage specifications are determined by the connector
used.
The 128-pos. plug-in card blocks for double European-format cards with indirect connection in accordance with IEC 60603-2/EN 60603-2
The desire to accommodate more and more components on one PCB has made the double European format (160 x 233.4 mm) very popular. However, this PCB format makes 19" racks very expensive if only one, two or three PCBs must be accommodated in the control cabinet.The SKBI 128 is mounted reliably on the base with five screws, and its rigid, rugged design safely supports the valuable PCBs, which are held in place by two engagement catches with an ejector which can be operated from the front.
Plug-in card blocks SKBI
COMBICON 19 InchPlug-in card blocks
Type B, C, D, E and H
Type F and G
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
531PHOENIX CONTACT
COMBICON 19 InchPlug-in card blocks
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
5,6
2,8
7,9
81
,7
90
95
10,6
2,5
20
,9
32
,5
39,8
2,8
7,9
81
,7
90
95
39,8
2,525
,4
35
,5
14,8
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Screw-type socket strip, type D, 32-position, fully equipped in
rows a + c, with standardized marking on both connection sides,
one 2.5 mm 2 screw connection per position
SFLY 2,5/D32 2285467 10
Screw-type socket strip, type F, with standardized marking on
both connection sides, 1 screw connection per position
2.5 mm2
32-position, equipped in rows z + b SFLY 2,5/F32/ZB 2285506 10
Technical data
General data
Voltage 250 V 250 V
Current 4 A 4 A
Stripping length 8 mm 8 mm
Screw thread M3 M3
Torque 0.5 Nm ... 0.6 Nm 0.5 Nm ... 0.6 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
Rated surge voltage / pollution degree - / 3 - / 3
Surge voltage category / insulating material group III / I III / I
Insulation material PA PA
Inflammability class in acc. with UL 94 V2 V2
Temperature indices (RTI/TI) 120/100 120/100
SFLY 2,5/D3232-position, with 2.5 mm2 screw connection
SFLY 2,5/F3232-position, with 2.5 mm2 screw connection
P PWidth 95 mm Width 95 mm
532 PHOENIX CONTACT
The SFLY 2,5/... Y-shaped socket strip with a screw connection at the rear has been developed for use in 19" racks. It is suitable for plug strips of D 32 or F 32 types in accordance with IEC 60603-2/EN 60603-2.
The socket strips have partially gold-plated contact springs which correspond to requirement category 3 in accordance with IEC 60603-2/EN 60603-2. The screw connections are designed in accordance with the cage principle for a 2.5 mm2
connection cross-section.
Socket strip with screw connectionSFLY 2,5/D 32
COMBICON 19 InchScrew-type socket strips
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
95
90
85
9,8
2,8
27,6
10,7 20,3
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Spring-cage socket strip, type D, 32-position, fully equipped in
rows a + c, one 1.5 mm2 spring-cage connection per position
FRONT-ZFL 1,5/D32 2201632 10
Test plug, consisting of 1 mm Ø test pin, conductor length
150 mm and socket Ø 2 mm
MPS-MT 1-S 1944372 1
Screwdriver
Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZF 1-0,6X3,5 1204517 10
Technical data
General data
Voltage 250 V
Current 4 A
Stripping length 11 mm
Rated surge voltage / pollution degree 4 kV / 3
Surge voltage category / insulating material group III / I
Insulation material PBT
Inflammability class in acc. with UL 94 V0
Temperature indices (RTI/TI) 140/120
Certification data
UL [V] / [A] / AWG 300 / 4 / 24 - 16
FRONT-ZFL 1,5/D3232-position, type D
u P
533PHOENIX CONTACT
The new FRONT-ZFL 1,5/D32 socket strip with a spring-cage connection at the rear has been specially developed for use in 19" racks. The installation dimensions and the labeling of the individual terminal points fulfill the requirements of IEC 60603-2/ DIN EN 60603-2 for type D32.The compact spring-cage technology allows solid and stranded conductors up to 1.5 mm2
to be connected. With a nominal voltage of 250 V, currents of up to 4 A can be transmitted reliably.When the FRONT-ZFL 1,5/D32 was developed, importance was attached to clear separation of the conductor opening and the actuation opening, to permit simple and quick conductor connections.The integrated test connection with a diameter of 1 mm makes it possible to constantly monitor the connected PCB.On the plug-in card side, the socket strip has partially gold-plated contact forks that comply with requirement class 2 in acc. with IEC 60603-2/DIN EN 60603-2.
Socket strip with spring-cage connection FRONT-ZFL 1,5/D 32
COMBICON 19 InchScrew-type socket strips
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
ca
35,3
10,1 30,1
15,24
2,8
95
90
85
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Screw-type socket strip, type D, 32-position, fully equipped in
rows a + c, with standardized marking on both connection sides,
one 2.5 mm 2 screw connection per position
FRONT-SFL 2,5/D32 2285593 10
Screw-type socket strip, type F, 48-position, fully equipped in
rows z, b + d, one 2.5 mm2 screw connection per position
Screw-type socket strip, type F, 32-position, partially equipped
in rows z + b, one 2.5 mm2 screw connection per position
Screw-type socket strip, type F, 32-position, partially equipped
in rows z + d, one 2.5 mm2 screw connection per position
Technical data
General data
Voltage 250 V
Current 4 A
Stripping length 10 mm
Screw thread M2,5
Torque 0.4 Nm ... 0.5 Nm
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
Rated surge voltage / pollution degree - / 3
Surge voltage category / insulating material group III / I
Insulation material PA
Inflammability class in acc. with UL 94 V2
Temperature indices (RTI/TI) 120/100
Certification data
UL [V] / [A] / AWG 250 / 4 / 30 - 12
534 PHOENIX CONTACT
FRONT-SFL 2,5/D3232-position, type D
u PWidth 95 mm
Screw-type socket strips FRONT-SFL 2,5/...
COMBICON 19 InchScrew-type socket strips
The FRONT-SFL 2,5 socket strips with a screw connection at the rear are suitable for use in 19" racks. They are available in D32 or F32 and F48 types in accordance with IEC 60603-2/EN 60603-2.
The screw connections, which can be operated from the front, are designed for a connection cross section of 2.5 mm2 per position and integrated into the compact housing (3 x pitch per line) in a practical way. The partially gold-plated contact springs correspond to requirement category 3 in accordance with IEC 60603-2/EN 60603-2.
The asymmetrical design of the socket part ensures optimum use of the space on the printed circuit board and allows the strips to be aligned directly in the rack without gaps.
Each terminal block is marked according to the standard. Individual labeling is possible using the self-adhesive strips SK 5.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
dz b
95 90
85
30,48
2,58
35,3
10,1 45,32
dz b
90
95
85
15,24
2,8
35,3
10,1 30,1
dz b
90
95
85
15,24
2,8
35,3
10,1 30,1
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
FRONT-SFL 2,5/F48 2285603 10
FRONT-SFL 2,5/F32/ZB 2285577 10
FRONT-SFL 2,5/F32/ZD 2285580 10
250 V 250 V 250 V
4 A 4 A 4 A
10 mm 10 mm 10 mm
M2,5 M2,5 M2,5
0.4 Nm ... 0.5 Nm 0.4 Nm ... 0.5 Nm 0.4 Nm ... 0.5 Nm
0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
- / 3 - / 3 - / 3
III / I III / I III / I
PA PA PA
V2 V2 V2
120/100 120/100 120/100
250 / 4 / 30 - 12 250 / 4 / 30 - 12 250 / 4 / 30 - 12
535PHOENIX CONTACT
FRONT-SFL 2,5/F4848-position, type F
FRONT-SFL 2,5/F32/ZB32-position, type F
FRONT-SFL 2,5/F32/ZD32-position, type F
u P u P u PWidth 95 mm Width 95 mm Width 95 mm
COMBICON 19 InchScrew-type socket strips
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com