1. Caterpillar Performance HandbookCaterpillarPerformanceHandbook42SEBD0351-42 2012 Caterpillar All Rights Reserved Printed in USACAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellowand the Power Edge trade dress, as well as corporate and product identity usedherein, are trademarks of Caterpillar and may not be used without permission.English_Cover_BW2.indd 1 4212/14/11 3:42 PM

2. CONTENTS TRACK-TYPE TRACTORS1 Page Preface . . . . . . . . . . . . . . . . . . . . . . . 4 Environment and Sustainability . . . 4MOTOR GRADERS2 Operator and Machine Protection . . . . . . . . . . . 5Operator Training . . . . . . . . . . 5SKID STEER LOADERS MULTI TERRAIN LOADERS 3 COMPACT TRACK LOADERSMachine Modifications . . . . . . 7Equipment Options . . . . . . . . . 7Machine Protection . . . . . . . . . 7 EXCAVATORS 4Fire Prevention. . . . . . . . . . . . . 7Safety Regulations . . . . . . . . . . 8Sound Suppression . . . . . . . . . 8Replacement Parts Warning . . 8BACKHOE LOADERS5 Nomenclature . . . . . . . . . . . . . . . . . 9 FOREST PRODUCTS6 PIPELAYERS 7 WHEEL TRACTOR-SCRAPERS TOWED SCRAPERS8 OFF-HIGHWAY & MINING TRUCKS9 ARTICULATED TRUCKS10 WHEEL DOZERS SOIL COMPACTORS11 WHEEL LOADERS INTEGRATED TOOLCARRIERS 12 TRACK LOADERS 13 TELESCOPIC HANDLERS 14 PAVING PRODUCTS 15 UNDERGROUND MINING EQUIPMENT16 HYDROMECHANICAL WORK TOOLS17 ENGINES 18Edition 42 1PHB-Intro-Nom-12.indd 112/14/11 4:31 PM 3. CATERPILLAR PERFORMANCE HANDBOOK a publication by Caterpillar Inc., Peoria, Illinois, U.S.A. JANUARY 2012 Important Notice: The subscription list has been discontinued for the Caterpillar Performance Handbook (PHB). Edition 42 is the final PHB to be distributed via a subscription list. Effective immediately, allPerformance Handbooks, including this current edition, can be ordered 24/7 at https://oos.midlandcorp.com/cat. Please direct any inquiries about the Performance Handbook tothe Caterpillar Performance Handbook Coordinator at Siegle_Toni_M@cat.com. Performance information in this booklet is intended for estimating purposes only. Because of the many variables peculiar to individual jobs (including material characteristics, operator efficiency, underfoot conditions, altitude, etc.), neither Caterpillar Inc. nor its dealers warrant that the machines described will perform as estimated. NOTE: Always refer to the appropriate Operation and Maintenance Manual for specific product information. Materials and specifications are subject to change without notice. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellowand the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Printed in U.S.A. 1979-2012 Caterpillar Inc. SEBD0351-42 2 Edition 42PHB-Intro-Nom-12.indd 2 12/14/11 4:31 PM 4. FORMER MODELS19ESTIMATING OWNING & OPERATING COSTS20TIRES21MINING AND EARTHMOVING 22STOCKPILE COAL HANDLING23LAND CLEARING24WASTE HANDLING 25TECHNOLOGY PRODUCTS26TABLES 27Edition 42 3PHB-Intro-Nom-12.indd 312/14/11 4:31 PM 5. PREFACEMachine performance must ultimately be measuredMethods for estimating machine owning and oper- in unit cost of material moved, a measure that includesating costs vary widely, depending on locality, indus- both production and costs. Factors bearing directly on try practices, owner preferences and other factors. productivity include such things as weight to horse- One method is suggested in the Handbook section on power ratio, capacity, type of transmission, speeds andOwning and Operating Costs. When used with good operating costs. The Perfor mance Handbook consid- judgment, it has provided reasonably accurate estimates ers these factors in detail. There are other less direct in the past. Included in the Owning and Operating machine performance factors for which no tables, chartsSection are guidelines, based on working conditions, to or graphs are possible. Serviceability, parts availability assist in estimating consumption of fuel and lubricants, and operator convenience are examples. In compar-tire life and repair costs for Cat machines. However, ing machine performance, all factors should be con-what one Handbook user regards as excellent con- sidered. This Handbook is intended as an aid which,ditions, another may consider severe or average, when coupled with experience and a good knowledgedepending on his own experience and basis of compari- of local conditions, can assist in estimating true machine son. Therefore, these guidelines should be considered performance. only approximations.Many sections of the Handbook include tables orCaterpillar Inc. has made every effort to assure that curves showing cycle times or hourly production figuresthe information contained in this Handbook is accurate for Cat machines under certain conditions. Statements and is a fair statement of the results to be achieved in the of conditions always accompany or precede the curves circumstances indicated. However, because of the many or tables. Before using any performance informationvariables involved in estimating the production or per- in this Handbook, a complete understanding of theformance of earthmoving machinery, their consumption qualifying conditions is essential. The data is based on of fuel and lubricants, tire life and repair costs, and the field testing, computer analysis, laboratory research andpossibility of inadvertent errors or omissions in assem- experience; and every effort has been made to assure bling this data, Caterpillar cannot and does not imply their correctness. that all data in this book are complete nor that this levelHowever, all such data is based upon 100% efficiencyof performance will be achieved on a given job. in operation a status which cannot be achieved con- Specifications shown in this Handbook were current tinuously even under ideal conditions. Thus, in usingat time of printing. However, due to Caterpillars many such performance and production data, it is necessarymachine improvement programs, specifications and to correct the results indicated in the handbook tablesmaterials may change without notice. For current speci- by appropriate factors. This allows for the anticipatedfications relating to a machines performance, please actual job efficiency, operator efficiency, material char- refer to the most recent Cat product specification sheet. acteristics, haul road conditions, altitude and other fac- tors which may reduce performance or production on a Caterpillar Inc. particular job. ENVIRONMENT AND SUSTAINABILITYCaterpillar supports environmental responsibility our customers to use the products they purchase from through sustainable development. Our products and ser- us in environmentally responsible ways. We take effec- vices are intended to support sustainable developmenttive steps to continually increase the natural resources of global resources and they will meet or exceed appli-efficiency and cleanliness of our facilities. When avail- cable regulations and standards wherever they are ini- able, the various product groups have included rele- tially sold. We establish and adhere to environmentallyvant sustainability data with their content updates for sound policies and practices in product design, engi-inclusion in the Performance Handbook. neering, and manufacturing. We educate and encourage 4 Edition 42PHB-Intro-Nom-12.indd 412/14/11 4:31 PM 6. OPERATOR AND MACHINE PROTECTIONA well trained operator, working under suitable con-I. Operator Training and Protection Practices ditions, utilizing a modern, properly-equipped machine Remember that any kind of machine or mechanical device can provides a machine-operator team capable of giving be hazardous if not kept in good condition, or if operated by maximum production. These factors, along with appro- careless or improperly trained operators, or if operated in an priate job site rules and communication procedures, areirresponsible manner. essential to coordinate people and machines workingListed below are some recommended basic steps that together.can be broadly applied to most work environments:Appropriately protected and maintained machines Train operators for the job they are assigned to do. are less likely to suffer premature component failure orThe length and type of training must comply with damage, and give operators the confidence and assur-governmental and local regulations wherever they ance they need to carry out their work. Further more,apply. As an example, machine operators in mining training is not complete until the operator reads, under-activities must be trained in accordance with Mine stands and agrees to follow the instructions provided inSafety and Health Administration (MSHA) regula- the Operation and Maintenance Manual included withtions. Where specific regulations do not apply, no every Cat machine.operator should be assigned to a job until he or sheEmployers have a duty to provide a safe work placemeets the following minimum requirements: for their employees. The purchaser of a Cat machine has Completes proper training to operate the assigned a duty to review his/her particular application and job machine and understands that seat belts must be site for the machine to identify potential hazards inher- worn whenever seated in operators compartment. ent to that application or job site. Based on the results SEAT BELTS SAVE LIVES! of this hazard analysis, the appropriate operator and Reads and understands the Operation & Main- machine protection configuration can be determined. tenance manual for that machine, and knows thatCaterpillar designs, builds, and tests its products to a copy of that manual is stored in the operators ensure the safety of operators, maintenance persons, ser- compartment. vice persons, and bystanders. That means people in, on Reads and understands the AEM (Association of and around Cat products. Caterpillar provides as stan- Equipment Manufacturers), or any other furnished dard equipment the appropriate operator and machine manual related to rules for safe machine operation protection for most applications. However, particular and identification of hazards. For example, that applications, including the use of some Work Tools, may includes the Work Tool Operation and Maintenance require additional operator and/or machine protection. Manual if a Cat Work Tool is involved in the given Caterpillar offers related options for most such applica- application. tions. However, there may be very special applications Has appropriate personal safety equipment and where the Cat dealer or the Purchaser may want to fabri- knows how to use it. This includes such things as cate, or request Caterpillar to provide, custom or special hard hat, gloves, safety glasses, hearing protection, guarding. Your Cat dealer can help you with this hazard high-visibility vest, and safety shoes. analysis and guarding configuration process. Knows what the job requirements are, what other machines are working in the area, and is aware of any hazardous conditions that may arise. Edition 42 5PHB-Intro-Nom-12.indd 512/14/11 4:31 PM 7. Be sure operators are alert and in proper physical and Make sure the machine is properly maintained. The mental condition to perform their work assignmentsoperator at the beginning of each shift should per- safely. No machine should be operated by a person form a walk-around inspection before the machine is who is drowsy, under the affect of medicines or drugs,placed in operation. This process is described in the suffers blackouts, or is suffering from any physical or machine and Work Tool Operation and Maintenance mental distraction that could contribute to unsafeManual. If this inspection reveals any problems that operation.could affect safety, the machine or Work Tool must Maintain proper job conditions and working proce- not be operated until these problems are corrected. dures. Check the job for possible hazards, both above Some examples include: and below ground level. Look for all possible sources Loose, bent or missing grab irons, railings or steps; of danger to the operator and others in the area. Worn, cut or missing seat belts (any seat belt over When operating in hazardous conditions the doorthree (3) years old must be replaced regardless of and windows must always be closed. Pay particularcondition); attention to conditions which may be hazardous or Damaged windows in the operators compartment; near the operating limits of the machine: e.g., side Worn, rubbing or abraded electrical insulation and slopes, steep grades, potential overloads, etc. Examinehydraulic hoses; the work site for restricted traffic patterns, obstructed Material or unwanted debris accumulation; views, congestion, underground power or gas lines, Incompatibility of the component attachments etc. If the machine is equipped with a Quick Coupler,(Quick Couplers); always make sure the Work Tool is properly attached Hydraulic leaks that could impair the lock/secure by conducting an attachment test as directed in thefeature of a Quick Coupler or other securing devices; Quick Coupler Operation and Maintenance Manual. Any fluid leaks; and Hazardous work conditions should be corrected Missing or damaged guards. wherever possible and adequate warnings should be Know the limits of your machine and equipment. posted when applicable. With certain Work Tool combinations, including Provide the correct machine to handle the job and Quick Couplers, the Work Tool can hit the cab or the equip it properly for the job to provide the neces- machine. Always check for interference limits when sary operator protection. Check for compliance with first operating. all applicable governmental and local regulations. It It is the machine owners or employers responsibility is the legal responsibility of the machine owner or to ensure the machine is properly maintained. Your employer to see that his equipment complies with, and Cat dealer will be glad to assist you in selecting and is operated in accordance with, all such requirements.equipping the machine best suited for your job and in providing maintenance for your machines. 6Edition 42PHB-Intro-Nom-12.indd 6 12/14/11 4:31 PM 8. II. Machine ModificationsIV. Machine ProtectionModifications must not be made to the machine that: Check the job for unusually demanding conditions Interfere with operator visibility; that could cause premature failure or excessive wear Interfere with ingress or egress from the machine;of machine components. Additional protective devices Exceed the rated payload or gross combination such as heavy-duty radiator guards, crankcase guards,weight of the machine resulting in overloading theengine enclosures, track roller guards and/or brakebraking and/or steering system or the roll-over pro-shields may be needed. Also, consider the use of anti-tective structure (ROPS) capacity rating (shown onvandalism devices, such as cap locks and instrumenta plate affixed to the ROPS); orpanel guards. The failure to provide proper guarding in Place objects in the cab that intrude into the oper-some of these applications can lead to machine damage,ators space or that are not firmly fixed into place. personal injury or death. Contact your Cat dealer for Are not authorized by Caterpillar.machine-protection and vandalism-prevention optionsfor your machine. III. Operator-related Equipment Options Each job presents unique conditions that must be V. Fire Prevention taken into account. Consider direct dangers to the Remember that most fluids on your machine are flammable! operator as well as all possible sources of distraction To minimize the risk of fire, Caterpillar recommends that could reduce operator efficiency and increase the following these basic steps: chances of costly and dangerous mistakes. Climate- Always perform the Walk-Around Inspection controlled, sound-suppressed cabs, and special exterior described in Part I. It can identify many of the fire lighting are options available from Caterpillar that canhazards described below. address requirements of special working environments. Remove trash (leaves, twigs, papers, etc.) that may Flexible machines include hydraulic excavatorsaccumulate in the engine compartment or around (track-type, wheel-type, and compact), skid-steer load- other hot parts on the product. ers, backhoe loaders and integrated tool-carriers can Do not operate a machine if leakage of flamma- utilize interchangeable Work Tools to accomplish spe- ble fluids is noticed. Repair leaks before resum- cific tasks. Work Tools or any tool used in hazardous ing machine operation. Most fluids used in Cat applications like demolition, quarry, logging, stumpmachines should be considered flammable. grinding, scrap handling, milling, and scaling, can create Keep access doors to major machine compartments a need for special operator guarding. When flying debrisin working order to permit the use of fire fighting from impact, cutting, shearing or sweeping attachments is equipment, should a fire occur. present, additional protective devices such as a front screen, Avoid attaching electrical wiring to hoses and tubes Falling Object Guarding System (FOGS, includes topthat contain flammable or combustible fluids. Hydrau- & front guarding), thick polycarbonate windshields or lic hoses can move during machine operation and a combination of these is recommended by Caterpillar. abrade wires and other hoses if improperly secured. The failure to provide proper operator/machine guarding Replace any rubbing, damaged, frayed, kinked or in some of these applications can lead to machine dam-leaking hydraulic hoses or fittings. Use genuine Cat age, personal injury or death. Contact your Cat dealer forparts or their equivalent, including both pressure and operator guarding options on your machine.temperature limit capabilities. Follow safe fueling practices as described in Cat Operation and Maintenance Manuals, AEM Safety Manuals, and local regulations. Never store flam- mable fluids in the machine operators compart- ment, nor smoke while fueling the machine. As an additional safety measure, keep a fire extin- guisher on the machine in a location as specified in the Operation and Maintenance Manual. Consider installation of an after-market fire-sup- pression system (FSS) on the equipment if the appli- cation and working conditions warrant it. Edition 427PHB-Intro-Nom-12.indd 712/14/11 4:31 PM 9. VI. Safety Regulations VII. Sound SuppressionRegulations vary from country to country and often Different marketing areas have different noise emis- within country. Your Cat dealer can assist you in prop-sion requirements. Noise regulations usually specify erly equipping your machine to meet applicable require-limits for operators and spectators. ments. Note: The general summaries given below are not substitutes for Owners or Employers reading and being(a) United States familiar with the appropriate local laws. OSHA and MSHA noise-control regulations set per-missible noise-exposure limits for machine operators (a) United States (US) and employees. Operator protection from machine noiseWith a few exceptions, all machine operations in thecan be achieved by use of factory-built cabs as offered United States are covered by federal and/or state regula-in the Caterpillar Price List. These cabs, when properly tions. If the machine is used in mining activities, the reg- maintained and operated with the doors and windows ulations are administered by the Mine Safety and Healthclosed, reduce the operator sound level for an eight- Administration (MSHA). Other activities, including hour operating period to meet the OSHA and MSHA construction, are under regulations administered bynoise-exposure limits in effect at the date of manufac- the Occupational Safety and Health Administrationture. Variables that may be encountered on the job site, (OSHA). These agencies require employers to provide asuch as other nearby noise sources or noise-reflecting safe working environment for employees. Caterpillar hassurfaces, may reduce the allowable work hours. If this the same objective.occurs, ear protective devices may be required. This isOSHA and MSHA have adopted criteria for ROPS, especially true if a machine is not equipped witha closed Falling Object Protective Structures (FOPS), seat belts, cab. For example if the machine has no cab,or is being warning horns, back-up alarms, operator sound lev- operated with the doors or windows opened. els, steering systems, and braking systems. Additional operators compartment protection may be required(b) European Union for machines engaged in logging, demolition and other Operator sound-exposure requirements for machines special applications.in Europe are very similar to the OSHA and MSHAregulations mentioned above. In addition to operator (b) European Union (EU)sound-exposure requirements, most types of Cat machinesThe EU Machinery Safety Directive applies to Catare subject to European Commission regulations for machines and most work tools. It requires that the exterior sound levels. Caterpillar ensures its products sold CE mark be applied to the product and that a man-in the EU comply with the applicable noise regulations. ufacturers declaration be provided. The CE mark indicates that safety issues have been addressed by apply- VIII. Replacement Parts for your CatMachine ing the appropriate safety standards in the design and manufacture of the machine. The objective of the Safety Directive is to protect operators, spectators and main- tenance personnel. Caterpillar fully supports this objec- WARNINGWhen replacement parts are required for this product, tive. This is especially true if a machine is not equipped Caterpillar recommends using Cat replacement parts or with a closed cab. For example if the machine has no cab,parts with equivalent specifications including, but not or is being operated with the doors or windows opened. limited to, physical dimensions, type, strength and material.Failure to heed this warning can lead to premature failures,product damage, personal injury or death of persons on,or around, the product. 8 Edition 42PHB-Intro-Nom-12.indd 8 12/14/11 4:31 PM 10. Nomenclature THE CAT PRODUCT LINE TRACK-TYPE TRACTORS*Waste Handling Arrangements (WHA) Flywheel power 55 to 634 kW (74 to 850 hp)available for sanitary landfill applications D3K XL (LRC) D4K XL (LRC)D5K XL (LRC)D5N XL D6K XLD6N XL D3K LGP (LRC)D4K LGP (LRC) D5K LGP (LRC) D5N LGPD6K LGP D6N LGP D3K2 XLD4K2 XL D5K2 XL D3K2 LGP D4K2 LGPD5K2 LGPD6R D6R Series 3*D6T* D7ED7G Series 2D7R Series 2*D6R XLD6R XL Series 3* D6T XL D7E LGPD7R XR Series 2*D6R LGP D6R XW Series 3* D6T XWD7R LGP Series 2*D6R LGP Series 3*D6T LGP D7RD8RD9R D10T* D11TD8T* D9T*D11T CDD8R LGPD8T LGP MOTOR GRADERS*All Wheel Drive. Flywheel power 104 to 397 kW (140 to 533 hp) 120K120M Global12K12M Global 140K 140M Global 120M Global 140M Global with AWD* optionwith AWD* option 160K160M Global 14M Global 16M Global24M Global 160M Global withAWD* option SKID STEER LOADERS/MULTI TERRAIN LOADERS/COMPACT TRACK LOADERS Operating Weight 2600 to 4865 kg (5710 to 10,730 lb)Skid Steer Skid SteerMulti Terrain Multi Terrain Multi TerrainCompact Track216B3246C247B3 277C259B3279C226B3256C257B3 287C 289C242B3262C297C 299C236B3272C252B3Edition 429PHB-Intro-Nom-12.indd 912/14/11 4:31 PM 11. HYDRAULIC EXCAVATORS Operating Weight 1650 to 316 600 kg (3640 to 698,000 lb) Track Models 301.6C 302.5C 303C CR304C CR 307C 308D CR 311D LRR 312D 301.8C303.5C CR 305C CR307D 308C CR SB 312D L 305.5313C CR314C CR315D L 319D L 320D320D L 323D L313C SR314C LCR319D LN320D RR 320D LRR 323D LN 321D LCR 324D 329D336D 349D324D L 329D L336D L 349D L FIX324E 329E336D LN349D L VG324E L 329E L336E 349E324E LN329E LN 340D HD WH 349E L FIX 336E L 349E L VG 336E LN 374D390D Front ShovelsWheel Models Operating Weight 74 300 to 318 500 kg (163,803 to 702,000 lb)M313D M315D385C FSM316D M318DM322D BACKHOE LOADERS Digging depth 4420 to 6528 mm (146" to 215") 416E 420E/420E IT 422E428E 430E/430E IT432E 442E 434E MECHANICAL 450E434E PILOT444E 10Edition 42PHB-Intro-Nom-12.indd 10 12/14/11 4:31 PM 12. FOREST PRODUCTS Wheel Loaders and Wheel SkiddersTrack SkiddersForest Machines Integrated Tool Carriers Work ToolsGrapplesLogging ForksWoodchip DozersScoops 525C 517 Cable 517 Grapple320D FM325D FM950H LL988H LL Rakes 535C 527 Cable 527 Grapple324D FM330D FM966H LLIT62H LL 545C980H LL TrackWheelTrack FellerWheel FellerFellingKnuckleboom Harvesters HarvesterBunchersBunchersHeads Forwarders Loaders HF 201 HF 221 501 532 550 511 541 553 534519 519SM 501 HD541 521 551 563 544529 519SM/EHC 511 551 522 552 573 564559B569SM 521 552 532 574569 569SM/EHC 522 584/584HD579 PIPELAYERS Lifting capacity 18 145 to 91 625 kg (40,000 to 202,000 lb) PL61 PL83 PL87 WHEEL TRACTOR-SCRAPERS Standard Models Heaped capacity 17 to 26 m3 (22 to 34 yd3)621H631G Tandem Powered Scrapers Heaped capacity 17 to 33.6 m3 (22 to 44 yd3) 627H 637G 657G Elevating ScrapersCoal Bowl Scrapers Heaped capacity 17.6 m3 (23 yd3)Heaped capacity 38 to 56 m3 (50 to 73 yd3)623H 637G 657G Push-Pull Scrapers Heaped capacity 17 to 33.6 m3 (22 to 44 yd3)627H 637G657GEdition 4211PHB-Intro-Nom-12.indd 11 12/14/11 4:31 PM 13. CONSTRUCTION & MINING TRUCKS Construction & Mining Trucks*OEM Solutions Group non-dumper for special Capacity 37 to 363 metric ton 41 to 400 U.S. tonsapplications available 770773E 777D 785C* 770G*773G*777G*785D* 772775G* 772G* 789C 793D 797F793F ARTICULATED TRUCKS Capacity 23.6 to 39.5 metric tons (26 to 43.5 U.S. tons) 725 730 730 Ejector735740740 Ejector WHEEL DOZERS Flywheel power 173 to 597 kW (232 to 801 hp)814F2824H834H 844H854K LANDFILL COMPACTORSSOIL COMPACTORS Flywheel power 173 to 349 kW (232 to 468 hp) Flywheel power 173 to 264 kW (232 to 354 hp)816F2826H836H815F2 825H WHEEL LOADERS & INTEGRATED TOOLCARRIERS* High lift arrangement available. Waste handling arrangement available. Bucket Capacity (Heaped) 0.6 to 30 m3 (0.78 to 40 yd3) 904H906H907H 908H 914G/IT14G 924Hz924H Pin On* 928Hz924H Hook On* 930H Pin On* 938H* 950H* 962H*966H* 972H* 980H* 930H Hook On* IT38HIT62H 988H* 990H* 992K993K*994F* 12Edition 42PHB-Intro-Nom-12.indd 1212/14/11 4:31 PM 14. TRACK LOADERS*General Purpose Bucket.Waste handling arrangement available. Bucket Capacity (Heaped)* 1.15 to 3.2 m3 (1.5 to 4.2 yd3) 953D 963D 973C 973D TELESCOPIC HANDLERS Non-U.S. VersionsU.S. Versions TH255TH406 TH255 TH406TH407 TH407TH336TH337TH414TH417TH514TL642TL943TL1055TL1255 PAVING PRODUCTS* *Paving products starting with BG are Barber Greene products. Cold Planers Reclaimer/Soil StabilizersFlywheel power 250-321 kW (335-430 hp)Cutting width 2438 mm (80")PM102PM200 2.0 m RM300RM500 PM200 2.2 mPM201 Asphalt Pavers Paving width 914 to 9754 mm (3 to 32 ft)AP300 AP500E AP600D AP1000E AP255 AP555E AP655D AP755AP1055EBG500E BG600DBG1000E BG555E BG655D BG1055E Edition 42 13PHB-Intro-Nom-12.indd 13 12/14/11 4:31 PM 15. PAVING PRODUCTS (Continued) Vibratory and Pneumatic Tire Compactors Single Drum Smooth Drum width 1270 to 2130 mm (42" to 70")RCP-433EE335-PC E335-PCCS423ECS44CS533E CS54E375-PC E375-PC E375-PC CS56 CS64 CS74CS76CS76 XT Single Drum, Padded Drum width 1270 to 2130 mm (42" to 70") E335-P CE335-PCCP44CP533E CP54 E37 5- P CE375- P C E375- P CCP56CP64 CP74 CP76 Double Drum and Combi Drum width 1000 to 2130 mm (33.4" to 70")CB14CB14 XWCB14 Full FlushCB22CB24 CC24CB32CD54CB-434D CB-434DCB434D CB434D XW CB54CB54 XWCB64CD54 Pneumatic Tire Asphalt Compactors Wheel loads 1134 to 5000 kg (2500 to 11,020 lb)C051-SPR THGIEW-YVAEHPS150CPS360C 14 Edition 42PHB-Intro-Nom-12.indd 14 12/14/11 4:31 PM 16. UNDERGROUND MINING Load-Haul-Dump Bucket sizes 2.4-11.6 m3 (3.1-15.2 yd3)R1300G IIR1600G R1700G R2900G R2900G XTRA Articulated Trucks 30-55 t (33-61 T) capacity AD30AD45BAD55B HYDROMECHANICAL WORK TOOLSHydraulic Mobile Scrap and Multi-Hammers Demolition ShearsProcessors H35D S H115 SS305 S340B MP15MP30 H45D S H120C S S320BS365B MP20MP40 H55D S H130 SS325BS385B H65D S H140D S H70/H70 SH160D S H90/H90C S H180D S H100/H100 SContractorsSorting and OrangeGrapplesDemolitionGrapples Peel GrapplesG107BG130BG315G310B GSH15BG112BG145BG320G315B GSH20BG115BG165BG330G320B GSH22BG120BG185BG125BEdition 4215PHB-Intro-Nom-12.indd 15 12/14/11 4:31 PM 17. Notes 16Edition 42PHB-Intro-Nom-12.indd 1612/14/11 4:31 PM 18. TRACK-TYPE TRACTORS1 Hydraulic Controls Bulldozers Rippers and Winches CONTENTS TRACK-TYPE TRACTORS WINCHES Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 PACCAR Features . . . . . . . . . . . . . . . . . . . . . . . . .1-83 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Allied Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-84 Power Shift Drawbar PullPhysical Specifications. . . . . . . . . . . . . . . . . . . . . . .1-85 vs. Ground Speed Curves. . . . . . . . . . . . . . . . . . .1-19Operating Specifications . . . . . . . . . . . . . . . . . . . . .1-99 Power Shift Travel Speeds . . . . . . . . . . . . . . . . . . . .1-24 Ground Pressures . . . . . . . . . . . . . . . . . . . . . . . . . .1-26Waste Handling See Waste Extreme Slope Operation . . . . . . . . . . . . . . . . . . . .1-28Track-Type Tractors . . . . . . . . . . Handling Section HYDRAULIC CONTROLS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-29 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-30TRACK-TYPE TRACTORS Features: BULLDOZERS Cat Diesel Engines provide the power, high torque Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-33 rise, reliability and performance you can depend on. Summary of Blade Options. . . . . . . . . . . . . . . . . . .1-34 Blade Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-35 HEUI on D6R and D7R increases fuel efficiency, General Dimensions (Tractor and Blade) . . . . . . . .1-38reduces smoke, improves cold starting and enhances SAE Blade Capacity Definition . . . . . . . . . . . . . . .1-38 diagnostic capabilities. Blade Specifications. . . . . . . . . . . . . . . . . . . . . . . . .1-39 Electronic Unit Injection (EUI) on D7R Series2. The Estimating Production Off-the-Job. . . . . . . . . . . . .1-52 Electronic Control Module (ECM) performs much Job Condition Correction Factors . . . . . . . . . . . . .1-56 like a mechanical governor, but has no moving parts. Measuring Production On-the-Job . . . . . . . . . . . . .1-57 The ECM signals the injectors regulating the fuel Work Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-57 supply thus controlling engine speed and power. EUI RIPPERS provides: Reduced exhaust smoke, automatic altitude compensation and cold start protection. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-59 Ripper Specification Diagrams Mechanical Electronic Unit Injector (MEUI) on D8T, Adjustable Parallelogram Ripper . . . . . . . . . . . .1-60 D9T, D10T and D11T excels in its ability to control Radial Ripper . . . . . . . . . . . . . . . . . . . . . . . . . . .1-62 injection pressure over the entire engine operating Fixed Parallelogram Ripper . . . . . . . . . . . . . . . .1-62speed range. It combines the technical advancement Specificationsof an electronic control system with the simplicity of Track-Type Tractors . . . . . . . . . . . . . . . . . . . . . .1-63 direct mechanically controlled unit fuel injection. These Tip Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72 features allow the engine to have complete control Estimating Ripping Production . . . . . . . . . . . . . . .1-72 over injection timing, duration, and pressure. Seismic Wave Velocity Charts . . . . . . . . . . . . . . . . .1-75 Estimated Ripper Production Graphs . . . . . . . . . .1-80 Edition 42 1-1PHB-Sec01(pg01-28).indd 112/14/11 3:44 PM 19. Track-Type TractorsFeatures Common Rail fuel injection system on D6K, D6N, D6T SystemOne Undercarriage extends undercarriage sys- and D7E as well as D3K, D4K and D5K; optimizes tem life, improves reliability, and reduces owning and performance and fuel consumption, minimizes heat operating costs. Optional on D6T (all sources), D6K rejection, and lowers emissions. and D6N, optional on D8T and D8R (East Peoria sourced), D3K, D4K, D5K. Oil cooled steering clutches and brakes standard on D9R, D10T and D11T. Elevated sprockets (not on D6K or D7E) eliminate final drive stress induced by roller frame movement Finger Tip Controls (FTC) of transmission, steeringand ground impact loads. Final drives pull chain only. clutches and brakes on D10T and D11T.Seals moved up out of dirt, sand and water for longer Differential steering allows infinitely variable turning life. Blade visibility improved because operator sits radius. Standard on the D6N, D6T, D7R Series 2,higher. D7E, D8R and D8T, allows the tractor to make a Resilient mounted bogie undercarriage on D8R, D8T, power turn keeping both tracks working for moreD9T, D10T and D11T reduces shock transmitted to traction and higher performance.tractor. Allows track to conform to rough ground Electronic Hydrostatic Power Train System on D3K for better traction. thru D6K allows power turns, stepless speed range, Solid mounted undercarriage standard on D3K through smooth modulation, dynamic hydrostatic braking, supe-D5K provides stable platform for low impact, and high rior maneuverability and excellent controllability.abrasion applications. Provides optimum finish grad- Electric Drive Power Train System on D7E allows step-ing performance. less speed range, smooth modulation, and excellent Oscillating undercarriage on D6K through D7E and efficiency. When coupled with differential steer it pro-optional on the D8R and D8T decreases ground shock vides superior maneuverability with locked-track pivotto the machine and provides a smoother, more com- turn capability and excellent controllability.fortable ride for the operator. Combined hand lever steering located left of operator Accessible modular design on D6N XL and up greatly provides easier operation on D9R.reduces drive train removal and installation time result- Standard Tractors designed for heavy dozing and gen- ing in reduced repair costs. eral grading. Tag link on D7R Series 2 and up; L-shaped push arms XL Tractor D6T offers higher horsepower and longer on D6N, D6T and D7E. Both designs allow closer roller frames for increased finish grading capability, mounting of dozer blades. This reduces total tractor flotation and productivity.length, improves maneuverability, balance, blade pen- etration and pryout. Extra Wide (XW) gauge on D6T length roller frame provides wider shoes for greater flotation and stabil- Low ground pressure (LGP) tractors offergreater flo- ity for steep slope grading. tation in soft, swampy conditions. Available on D3K through D8T. Sealed and Lubricated Track reduces pin and bush- ing wear for lower undercarriage repair costs. Sealed and lubricated track is standard on the D3K, D4K, and D5K while heavy duty track chain is available on D6N, D6T, D7R Series 2 and D7E improves wear life and reduces pin/bore stretching and cracking. 1-2Edition 42PHB-Sec01(pg01-28).indd 2 12/14/11 3:44 PM 20. SpecificationsTrack-Type Tractors 1 MODEL D3K XL (LRC) D3K LGP (LRC)D3K2 XL D3K2 LGP Flywheel Power55.2 kW74 hp 55.2 kW74 hp 59.7 kW80 hp 59.7 kW80 hp Operating Weight* 7795 kg 17,185 lb8093 kg 17,842 lb7958 kg 17,544 lb8403 kg 18,525 lb Engine ModelC4.4 ACERTC4.4 ACERT C4.4 ACERT C4.4 ACERT Rated Engine RPM19001900 2200 2200 No. of Cylinders4444 Bore105 mm 4.13" 105 mm 4.13" 105 mm 4.13" 105 mm 4.13" Stroke127 mm5.0" 127 mm5.0" 127 mm5.0" 127 mm5.0" Displacement4.4 L269 in34.4 L269 in3 4.4 L269 in3 4.4 L 269 in3 Track Rollers (Each Side) 6666 Width of Standard Track Shoe406 mm16"635 mm25"406 mm16"635 mm25" Length of Track on Ground2095 mm83" 2095 mm83" 2248 mm89" 2248 mm89" Ground Contact Area (w/Std. Shoe)17 011 cm2 2637 in226 607 cm2 4124 in218 254 cm2 2848 in228 550 cm2 4425 in2 Track Gauge1495 mm59" 1725 mm68" 1495 mm59" 1725 mm68" GENERAL DIMENSIONS:Height (To Top of ROPS) 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8" 2763 mm 108.8"Overall Length (with P blade) 4266 mm168"4255 mm 167.6" 4266 mm168"4266 mm168"(without Blade) 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9" 3275 mm 128.9"Width (w/o Trunnion and Blade Std. Shoe)1901 mm 74.8"2360 mm 92.9"1901 mm 74.8"2360 mm 92.9"Ground Clearance 332 mm13"332 mm13"332 mm13"332 mm13" Blade Types and Widths:VPAT, Straight2646 mm 104.1" 3149 mm 124.0" 2646 mm 104.1" 3149 mm124"VPAT, Angled 252417 mm 95.1"2874 mm113"2417 mm 95.1"2874 mm113" Fuel Tank Refill Capacity 195 L51.5 195 L 51.5 195 L 51.5 195 L 51.5 U.S.gal U.S.gal U.S.gal U.S.gal *Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigiddrawbar, front pull device and standard service crankcase guard.Edition 42 1-3PHB-Sec01(pg01-28).indd 3 12/14/11 3:44 PM 21. Track-Type TractorsSpecifications MODEL D4K XL (LRC) D4K LGP (LRC)D4K2 XL D4K2 LGP Flywheel Power62.6 kW84 hp 62.6 kW 84 hp 68.8 kW92 hp 68.8 kW92 hp Operating Weight* 8147 kg17,961 lb 8501 kg18,742 lb8201 kg 18,080 lb8510 kg 18,761 lb Engine Model C4.4 ACERTC4.4 ACERT C4.4 ACERTC4.4 ACERT Rated Engine RPM19001900 22002200 No. of Cylinders 4444 Bore105 mm 4.13" 105 mm4.13" 105 mm 4.13" 105 mm 4.13" Stroke127 mm5.0"127 mm5.0" 127 mm5.0" 127 mm5.0" Displacement4.4 L269 in34.4 L269 in3 4.4 L269 in34.4 L 269 in3 Track Rollers (Each Side)7777 Width of Standard Track Shoe460 mm18" 635 mm25"460 mm18"635 mm25" Length of Track on Ground2248 mm89" 2248 mm 89" 2248 mm89" 2248 89" Ground Contact Area (w/Std. Shoe) 20 682 cm2 3206 in228 550 cm2 4425 in220 862 cm2 3206 in228 550 cm2 4425 in2 Track Gauge1550 mm61" 1725 mm 68" 1550 mm61" 1725 mm68" GENERAL DIMENSIONS: Height (To Top of ROPS)2763 mm 108.8" 2763 mm108.8" 2763 mm 108.8" 2763 mm 108.8" Overall Length (with P blade)4274 mm168"4266 mm 168"4266 mm168"4266 mm168"(without Blade) 3275 mm 128.9" 3275 mm128.9" 3275 mm 128.9" 3275 mm 128.9" Width (w/o Trunnion and Blade Std. Shoe) 2010 mm 79.1"2360 mm92.9"2010 mm 79.1"2360 mm 92.9" Ground Clearance332 mm13" 332 mm13"332 mm13"332 mm13" Blade Types and Widths: VPAT, Straight 2782 mm 109.5" 3149 mm124.0" 2782 mm 109.5" 3149 mm124" VPAT, Angled 25 2542 mm 100.1" 2874 mm 113"2542 mm 100.1" 2874 mm113" Fuel Tank Refill Capacity 195 L 51.5195 L51.5195 L51.5 195 L 51.5U.S.gal U.S.gal U.S.gal U.S.gal *Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigiddrawbar, front pull device and standard service crankcase guard. 1-4 Edition 42PHB-Sec01(pg01-28).indd 412/14/11 3:44 PM 22. SpecificationsTrack-Type Tractors1 MODEL D5K XL (LRC) D5K LGP (LRC)D5K2 XL D5K2 LGP Flywheel Power:Hydrostatic71.6 kW96 hp 71.6 kW 96 hp 77.6 kW104 hp77.6 kW104 hp Operating Weight:*Hydrostatic9408 kg20,741 lb 9683 kg21,347 lb9314 kg 20,534 lb9646 kg 21,266 lb Engine Model C4.4 ACERTC4.4 ACERT C4.4 ACERTC4.4 ACERT Rated Engine RPM19001900 21002100 No. of Cylinders 4444 Bore105 mm 4.13" 105 mm4.13" 105 mm 4.13" 105 mm 4.13" Stroke127 mm5.0"127 mm5.0" 127 mm5.0" 127 mm5.0" Displacement4.4 L269 in34.4 L269 in3 4.4 L269 in34.4 L 269 in3 Track Rollers (Each Side)7777 Width of Standard Track Shoe510 mm20" 660 mm26"510 mm20"660 mm26" Length of Track on Ground2310 mm91" 2310 mm 91" 2310 mm91" 2310 mm91" Ground Contact Area (w/Std. Shoe) 23 562 cm2 3652 in230 492 cm2 4726 in223 562 cm2 3652 in230 492 cm2 4726 in2 Track Gauge1600 mm63" 1750 mm 69" 1600 mm63" 1750 mm69" GENERAL DIMENSIONS:Height (To Top of ROPS Canopy)2769 mm 109.0" 2769 mm109.0" 2769 mm 109.0" 2769 mm 109.0"Height (To Top of ROPS Cab) 2769 mm 109.0" 2769 mm109.0" 2769 mm 109.0" 2769 mm 109.0"Overall Length (with P Blade) 4321 mm 170.1" 4294 mm169.1" 4321 mm 170.1" 4321 mm 170.1"(without Blade) 3199 mm 125.9" 3265 mm128.5" 3199 mm 125.9" 3265 mm 128.5"Width (w/o Trunnion and Blade Std. Shoe) 2110 mm83.1"2410 mm94.9"2110 mm 83.1"2410 mm 94.9"Ground Clearance 332 mm13" 332 mm13"332 mm13"332 mm13" Blade Types and Widths:VPAT, Straight2782 mm 109.5" 3220 mm126.7" 2782 mm 109.5" 3220 mm 126.7"VPAT, Angled 252636 mm 103.8" 2940 mm115.8" 2636 mm 103.8" 2940 mm 115.8" Fuel Tank Refill Capacity 195 L 51.5195 L51.5195 L51.5 195 L 51.5U.S.gal U.S.gal U.S.gal U.S.gal *Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, back-up alarm, seat belts, lights, rigiddrawbar, front pull device and standard service crankcase guard.Edition 421-5PHB-Sec01(pg01-28).indd 512/14/11 3:44 PM 23. Track-Type TractorsSpecifications MODEL D6K XLD6K LGPD6K XL D6K LGP Engine Emissions Tier Tier 4 Interim/ Tier 4 Interim/StageIIIBStageIIIB Flywheel Power: Hydrostatic 93.2 kW125 hp 93.2 kW125 hp 93.2 kW125 hp 93.2 kW125 hp Operating Weight: Hydrostatic 12 886 kg 28,409 lb 13 467 kg 29,690 lb 12 866 kg 28,409 lb 13 467 kg 29,690 lb Engine Model C6.6 ACERT C6.6 ACERTC6.6 ACERTC6.6 ACERT Rated Engine RPM2100210021002100 No. of Cylinders6 6 6 6 Bore105 mm 4.13"105 mm 4.13"105 mm 4.13"105 mm 4.13" Stroke127 mm5.0"127 mm5.0"127 mm5.0"127 mm5.0" Displacement6.6 L403 in36.6 L403 in36.6 L403 in36.6 L403 in3 Track Rollers (Each Side) 7 7 7 7 Width of Standard Track Shoe560 mm22" 760 mm30" 560 mm22" 760 mm30" Length of Track on Ground 2645 mm 104"2645 mm 104"2645 mm 104"2645 mm 104" Ground Contact Area (w/Std. Shoe)3.0 m2 4650 in2 4.0 m2 6200 in2 3.0 m2 4650 in2 4.0 m2 6200 in2 Track Gauge 1770 mm 70" 2000 mm 79" 1770 mm 70" 2000 mm 79" GENERAL DIMENSIONS: Height (To Top of ROPS Canopy)2958 mm116.5" 2958 mm116.5" 2958 mm116.5" 2958 mm116.5" Height (To Top of ROPS Cab) 2958 mm116.5" 2958 mm116.5" 2958 mm116.5" 2958 mm116.5" Overall Length (with VPAT Blade) 4688 mm 185"4688 mm 185"4688 mm 185"4688 mm 185"(without Blade)4220 mm 166"4220 mm 166"4220 mm 166"4220 mm 166" Width (w/o Trunnion and Blade Std. Shoe)* 2330 mm91.7"2760 mm108.7" 2330 mm91.7"2760 mm108.7" Ground Clearance 360.4 mm14.2"360.4 mm 14.2"360.4 mm 14.2"360.4 mm 14.2" Blade Types and Widths: VPAT3077 mm121.1" 3360 mm132.3" 3195 mm125.8" 3683 mm 145" Fuel Tank Refill Capacity 275 L72.6275 L 72.6275 L 72.6275 L 72.6 U.S.galU.S.galU.S.galU.S.gal *Width (w/o Trunnion Std. Shoe) is also w/o VPAT Blade. 1-6Edition 42PHB-Sec01(pg01-28).indd 612/14/11 3:44 PM 24. SpecificationsTrack-Type Tractors1 MODEL D6N XLD6N LGPD6N XL D6N LGP Engine Emissions Tier Tier 4 Interim/ Tier 4 Interim/StageIIIBStageIIIB Flywheel Power:Power Shift111.8 kW150 hp111.8 kW 150 hp 111.8 kW150 hp111.8 kW 150 hp Operating Weight:Power Shift Differential Steer 16 668 kg 36,747 lb 17 997 kg 39,712 lb 16 668 kg 36,747 lb 17 997 kg 39,712 lb Engine Model C6.6 ACERT C6.6 ACERTC6.6 ACERTC6.6 ACERT Rated Engine RPM 2200 2200 2200 2200 No. of Cylinders6 6 6 6 Bore105 mm4.13" 105 mm 4.13"105 mm4.13" 105 mm 4.13" Stroke127 mm 5.0" 127 mm5.0"127 mm 5.0" 127 mm5.0" Displacement6.6 L 403 in3 6.6 L403 in36.6 L 403 in3 6.6 L403 in3 Track Rollers (Each Side) 7 8 7 8 Width of Standard Track Shoe610 mm 24"840 mm33" 610 mm 24"840 mm33" Length of Track on Ground 2611 mm103" 3113 mm 123"2611 mm103" 3113 mm 123" Ground Contact Area (w/Std. Shoe)3.18 m24929 in25.24 m2 8122 in2 3.18 m24929 in25.24 m2 8122 in2 Track Gauge 1890 mm 74.4" 2160 mm 85" 1890 mm 74.4" 2160 mm 85" GENERAL DIMENSIONS:Height (To Top of ROPS Canopy) 3040 mm 119.7"3144 mm123.8" Height (To Top of ROPS Cab)3095 mm 121.9"3200 mm 126"3095 mm 121.9"3200 mm 126"Overall Length(with VPAT Blade)4903 mm193" 5369 mm211.4" 5035 mm 198.2"5398 mm212.5"(without Blade)3740 mm 147.2"4165 mm 164"3740 mm 147.2"4165 mm 164"(with SU Blade)5157 mm203" 5157 mm203" Width (over Trunnion)2630 mm 103.5" 2630 mm 103.5"Width (w/o Trunnion Std. Shoe)*2500 mm 98.4" 3000 mm 118"2500 mm 98.4" 3000 mm 118"Ground Clearance 394 mm15.5" 507 mm 20.0"394 mm15.5" 507 mm 20.0" Blade Types and Widths:Semi-U 3154 mm124" 3154 mm124" VPAT 3272 mm 128.8"4080 mm160.6" 3272 mm 128.8"4082 mm160.7" Fuel Tank Refill Capacity 300 L79.3300 L 79.3300 L 79.3300 L 79.3 U.S.galU.S.galU.S.galU.S.gal *Width (w/o Trunnion Std. Shoe) is also w/o VPAT Blade.Edition 421-7PHB-Sec01(pg01-28).indd 712/14/11 3:44 PM 25. Track-Type TractorsSpecifications MODELD6R D6R XL D6R LGP Flywheel Power 130 kW 175 hp145 kW195 hp145 kW195 hp Operating Weight:* Power Shift 18 325 kg40,400 lb20 080 kg44,270 lb21 716 kg47,874 lb Engine Model C9C9C9 Rated Engine RPM: Power Shift 200020002000 No. of Cylinders6 6 6 Bore 112 mm4.4"112 mm4.4"112 mm4.4" Stroke 149 mm5.9"149 mm5.9"149 mm5.9" Displacement 8.8 L537 in38.8 L537 in38.8 L537 in3 Track Rollers (Each Side) 6 7 8 Width of Standard Track Shoe 560 mm 22"560 mm 22"915 mm 36" Length of Track on Ground 2664 mm105" 2871 mm113" 3275 mm129" Ground Contact Area (w/Std. Shoe)2.98 m2 4620 in2 3.22 m24972 in2 5.99 m29288 in2 Track Gauge 1880 mm 74" 1880 mm 74" 2286 mm 90" GENERAL DIMENSIONS: Height (Stripped Top)** 3143 mm104"3143 mm104" 3193 mm 106" Height (To Top of ROPS Canopy)3195 mm106"3195 mm106"3245 mm108" Height (To Top of ROPS Cab) 3195 mm106"3195 mm106"3245 mm108" Overall Length (without Blade)3860 mm128"3860 mm128"4247 mm 1311"with S Blade 4903 mm160" 5465 mm179"with SU Blade5095 mm167"5332 mm175" with Angle Blade 5007 mm164" Width (over Trunnion) 2640 mm 88"2640 mm 88"3491 mm115" Width (w/o Trunnion Std. Track) 2440 mm 80"2440 mm 80" 3201 mm 106" Ground Clearance 383 mm 13" 383 mm 13" 433 mm 15" Blade Types and Widths: Straight3360 mm110" 4063 mm134" Angle Straight4166 mm138"4166 mm138" Semi-U3260 mm108"3260 mm108" Fuel Tank Refill Capacity424 L112 U.S.gal 424 L112 U.S.gal 424 L112 U.S.gal **Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluid, SU blade, horn, back-up alarm, retrieval hitch and front pull hook. **Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. 1-8 Edition 42PHB-Sec01(pg01-28).indd 8 12/14/11 3:44 PM 26. SpecificationsTrack-Type Tractors1D6R Series 3D6R Series 3 D6R Series 3 MODEL D6R Series 3 XLXWLGP Flywheel Power 138 kW185 hp149 kW 200 hp 149 kW 200 hp149 kW200 hp Operating Weight:*Power Shift Differential SteerSU Blade18 326 kg 40,400 lb20 081 kg 44,270 lb 20 672 kg 45,573 lb21 716 kg 47,874 lb Engine ModelC9 ACERT C9 ACERTC9 ACERT C9 ACERT Rated Engine RPM: Power Shift 1850 18501850 1850 No. of Cylinders66 66 Bore112 mm4.4" 112 mm4.4"112 mm4.4" 112 mm4.4" Stroke149 mm5.9" 149 mm5.9"149 mm5.9" 149 mm5.9" Displacement8.8 L537 in3 8.8 L537 in38.8 L537 in3 8.8 L537 in3 Track Rollers (Each Side) 67 78 Width of Standard Track Shoe560 mm22"560 mm22" 760 mm30"915 mm 36"VPAT 560 mm22" 760 mm30"810 mm 32" Length of Track on Ground2.67 m 89"2.87 m 95" 2.87 m 95"3.28 m 109" Ground Contact Area(w/Std. Shoe)2.98 m24620 in23.22 m2 4972 in24.36 m26780 in25.99 m2 9288 in2VPAT 3.22 m2 4972 in24.36 m26780 in25.31 m2 8256 in2 Track Gauge1.88 m74" 1.88 m74" 2.03 m 80" 2.29 m90"VPAT 2.13 m84" 2.29 m 90" 2.29 m90" GENERAL DIMENSIONS:Height (Stripped Top)** 2.38 m 710"2.38 m710"2.38 m 710"2.43 m80"Height (To Top of ROPS Canopy)3.20 m 106"3.20 m106"3.20 m 106"3.25 m 108"Height (To Top of ROPS Cab) 3.19 m 105"3.20 m106"3.20 m 106"3.25 m 108"Overall Length (without Blade)3.86 m 128"3.86 m128"3.86 m 128"4.25 m 1311"with S Blade4.90 m 161" 5.47 m 1711"with SU Blade 5.10 m 169"5.33 m176"5.33 m 176"with VPAT Blade 5.27 m174"5.27 m 174"5.97 m 197"with Angle Blade5.01 m 165"5.21 m171"5.21 m 171"Overall Length (VPAT) 3.86 m128"3.86 m 128"4.25 m 1311"with S Blade 5.47 m 1711"with SU Blade 5.33 m176"5.33 m 176"with VPAT Blade 5.27 m174"5.27 m 174"5.97 m 197"with Angle Blade 5.21 m171"5.21 m 171"Width (over Trunnion) 2.64 m88"2.64 m 88"2.95 m98"3.43 m88"Width (w/o Trunnion Std. Track) 2.44 m80"2.44 m80" 2.74 m90"3.15 m 104"Ground Clearance 383 mm 13" 383 mm 13"383 mm 13" 433 mm15" Blade Types and Widths:Straight3.36 m 110" 4.06 m 134"Angle Straight4.17 m 138"4.17 m138"4.20 m 139"Full 25 Angle3.78 m 125"3.78 m125"3.81 m 126"Semi-U3.26 m 108"3.26 m108"3.56 m 118"VPATStraight 3.88 m 129" 4.16 m 138"4.16 m 138"Full 24 Angle 3.55 m 118" 3.81 m 126"3.81 m 126" Fuel Tank Refill Capacity 382 L101382 L101 382 L101382 L101U.S.galU.S.gal U.S.galU.S.gal **Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluid, SU blade, horn, back-up alarm, retrieval hitch and front pull hook. **Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.Edition 421-9PHB-Sec01(pg01-28).indd 912/14/11 3:44 PM 27. Track-Type Tractors Specifications MODELD6T XLD6T XW D6T LGP Flywheel Power 149 kW200 hp 149 kW200 hp149 kW200 hp Operating Weight:*Power Shift Differential SteerSU Blade 20 449 kg45,090 lb 21 301 kg46,968 lb 22 039 kg48,588 lb Engine ModelC9 ACERT C9 ACERT C9 ACERT Rated Engine RPM: Power Shift 1850 1850 1850 No. of Cylinders666 Bore 112 mm4.4" 112 mm4.4" 112 mm4.4" Stroke 149 mm5.9" 149 mm5.9" 149 mm5.9" Displacement 8.8 L537 in3 8.8 L537 in3 8.8 L537 in3 Track Rollers (Each Side) 778 Width of Standard Track Shoe 560 mm 22" 760 mm 30" 915 mm 36"VPAT560 mm 22" 710 mm 28" 785 mm 31" Length of Track on Ground 2.84 m 94"2.84 m 94"3.25 m 108" Ground Contact Area (w/Std. Shoe)3.18 m2 4929 in2 4.31 m2 6681 in2 5.95 m2 9223 in2VPAT3.18 m2 4929 in2 4.03 m2 6247 in2 5.10 m2 7905 in2 Track Gauge 1.88 m74"2.03 m80"2.29 m90"VPAT 2.13 m84"2.29 m90"2.29 m90" GENERAL DIMENSIONS:Height** (Stripped Top)*** 2.44 m 80"2.44 m 80"2.45 m 80"Height** (To Top of ROPS Canopy) 3.20 m106"3.20 m106"3.25 m108"Height** (To Top of ROPS Cab)3.15 m104"3.15 m104"3.15 m104"Overall Length (without Blade) 3.86 m128"3.86 m128"4.25 m1311"with S Blade 5.47 m1711"with SU Blade5.33 m176"5.33 m176"with VPAT Blade5.27 m174"5.27 m174"5.97 m 197"with Angle Blade 5.21 m171"5.21 m171"5.82 m 191"Width (over Trunnion)2.64 m88" 2.95 m98" 3.43 m88"Width (w/o Trunnion Std. Track)2.44 m80" 2.79 m92" 3.20 m 106"Ground Clearance**384 mm 13"384 mm 13"434 mm15" Blade Types and Widths:Straight 4.06 m 134"Angle Straight 4.17 m138"4.50 m149"5.07 m 168"Full 25 Angle 3.78 m125"3.81 m126"4.63 m 152"Semi-U 3.26 m108"3.56 m118"VPATStraight 3.88 m129"4.16 m138"4.16 m 138"Full 24 Angle 3.55 m118"3.81 m126"3.81 m 126" Fuel Tank Refill Capacity425 L 112 U.S.gal 425 L 112 U.S.gal 425 L112 U.S.gal ***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Track-Type Tractor Sustainability Well matched engine and power train systems enhance productivity and fuel efficiency. 1-10 Edition 42PHB-Sec01(pg01-28).indd 1012/14/11 3:44 PM 28. Specifications Track-Type Tractors 1 MODELD6T XLD6T XW D6T LGP Engine Emissions TierTier 4 Interim/Stage IIIB Tier 4 Interim/Stage IIIBTier 4 Interim/Stage IIIB Flywheel Power149 kW 200 hp149 kW200 hp149 kW 200 hp Operating Weight:*Power Shift Differential Steer20 679 kg45,590 lb21,531 kg47,468 lb 22,270 kg49,096 lb Engine ModelC9.3 ACERT C9.3 ACERTC9.3 ACERT Advertised Engine RPM18501850 1850 No. of Cylinders666 Bore115 mm4.5"115 mm4.5" 115 mm4.5" Stroke149 mm5.9"149 mm5.9" 149 mm5.9" Displacement 9.3 L 567 in39.3 L567 in3 9.3 L567 in3 Track Rollers (Each Side) 778 Width of Standard Track Shoe 560 mm 22" 760 mm 30" 915 mm36"VPAT560 mm 22" 710 mm 28" 785 mm31" Length of Track on Ground 2.84 m94" 2.84 m94" 3.25 m 108" Ground Contact Area (w/Std. Shoe) 3.18 m2 4929 in2 4.31 m26681 in2 5.95 m2 9223 in2VPAT 3.18 m2 4929 in2 4.03 m26247 in2 5.10 m2 7905 in2 Track Gauge 1.88 m74"2.03 m80"2.29 m 90"VPAT 2.13 m84"2.29 m90"2.29 m 90" GENERAL DIMENSIONS:Height** (Stripped Top***) 2.44 m80" 2.44 m80" 2.45 m 80"Height** (To Top of ROPS Canopy) 3.11 m102"3.11 m 102" 3.16 m 105"Height** (To Top of ROPS Cab)3.15 m104"3.15 m 104" 3.15 m 104"Overall Length (without Blade) 3.88 m 129" 3.88 m 129" 4.22 m1310"with S Blade 5.43 m1710"with SU Blade5.34 m 176" 5.35 m 177"with VPAT Blade5.10 m 169" 5.37 m 177" 5.97 m 197"with Angle Blade 5.22 m 172" 5.28 m 174" 5.80 m 190"Width (over Trunnion)2.64 m88" 2.95 m98" 3.43 m 88"Width (w/o Trunnion Std. Track)2.44 m80" 2.79 m92" 3.20 m 106"Ground Clearance**384 mm 13"384 mm 13"434 mm15" Blade Types and Widths:Straight 4.16 m 138" 4.52 m1410" 5.07 m 168"Angle Straight 3.80 m 126" 4.13 m 137" 4.78 m 158"Full 25 Angle 3.26 m108"3.57 m 119"Semi-U 3.88 m 129" 4.16 m 138" 4.16 m 138"VPAT Straight3.54 m117"3.80 m 126" 3.80 m 126" Fuel Tank Refill Capacity425 L112 U.S.gal425 L112 U.S.gal 425 L 112 U.S.gal ***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade and drawbar. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances.Edition 42 1-11PHB-Sec01(pg01-28).indd 1112/14/11 3:44 PM 29. Track-Type TractorsSpecifications MODELD7E D7E LGP Engine Emissions Tier Tier 4 Interim/Stage IIIB Tier 4 Interim/Stage IIIB Advertised Flywheel Power175 kW235 hp175 kW235 hp Operating Weight:* Electric Drive Differential Steer25 996 kg57,310 lb28 465 kg62,755 lb Engine Model C9.3C9.3 Advertised Engine RPM17001700 No. of Cylinders 6 6 Bore115 mm4.5"115 mm 4.5" Stroke149 mm5.9"149 mm 5.9" Displacement9.3 L567 in39.3 L567 in3 Track Rollers (Each Side)7 8 Width of Standard Track Shoe610 mm 24"915 mm 36" Length of Track on Ground3.02 m 911"3.45 m 114" Ground Contact Area (w/Std. Shoe) 3.68 m2 5698 in26.31 m2 9792 in2 Track Gauge1.98 m66"2.29 m76" GENERAL DIMENSIONS: Height** (To Top of ROPS Cab)3.32 m1011"3.32 m1011" Overall Length (without Blade) 4.88 m 160"4.88 m 160"with S Blade5.86 m 193"5.56 m 183"with SU Blade 6.07 m1911" Width (over Trunnion)2.88 m95"3.42 m 113" Width (w/o Trunnion Std. Shoe) 2.59 m86" 3.2 m 106" Ground Clearance472 mm18.6" 472 mm18.6" Blade Types and Widths: Straight3.9 m1210"4.54 m1411" Angle Straight4.5 m 149" Full 25 Angle 4.12 m 136" Universal3.99 m 131" Semi-U 3.71 m 122" Fuel Tank Refill Capacity 409 L 108 U.S. gal409 L 108 U.S. gal **Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade and drawbar. **Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. Cat D7E Resourceful in every way The D7E is designed to maximize efficiency and productivity while conserving natural resources. Burns 1030% less fuel per hour than previous models. Less fuel burned means reduced emissions. The D7E earned a 2009 Clean Air Excellence Award from the U.S. Environmental Protection Agency. More efficient 25% more material moved per liter/gallon of fuel. Fewer parts and longer component life, less fuel and fluids, means less to replace and less to dispose. Major structures and components are built to be rebuilt, reducing waste and replacement costs. 1-12Edition 42PHB-Sec01(pg01-28).indd 1212/14/11 3:44 PM 30. Specifications Track-Type Tractors 1 MODEL D7G Series 2D7RD7R XR Flywheel Power 149 kW 200 hp179 kW 240 hp 179 kW240 hp Operating Weight:*Power Shift Clutch Brake (FTC) 20 580 kg45,381 lb Power Shift Differential Steer 25 455 kg56,129 lb 27 002 kg59,540 lb Engine Model3306 DITA C9 C9 Rated Engine RPM2000 2100 2100 No. of Cylinders666 Bore 121 mm4.75"112 mm 4.4"112 mm 4.4" Stroke 152 mm 6"149 mm 5.9"149 mm 5.9" Displacement10.5 L638 in3 8.8 L537 in3 8.8 L537 in3 Track Rollers (Each Side) 678 Width of Standard Track Shoe 560 mm 22" 560 mm 22" 560 mm 22" Length of Track on Ground 2.72 m 811" 2.87 m95" 3.05 m 100" Ground Contact Area (w/Std. Shoe)3.05 m2 4738 in2 3.22 m24991 in2 3.42 m2 5295 in2 Track Gauge 1.98 m 66"1980 mm 66"1980 mm66" GENERAL DIMENSIONS:Height** (Stripped Top)*** 2.47 m 81"2.58 m86" 2.58 m86"Height** (To Top of ROPS Canopy) 3.37 m 111" 3.29 m 109" 3.29 m 109"Height** (To Top of ROPS Cab)3.37 m 111" 3.28 m 109" 3.28 m 109"Overall Length (without Blade) 4.20 m 139" 4.73 m 156" 4.73 m 156"with S Blade 5.28 m 174" Width (over Trunnion) 2.88 m95" 2.88 m95"Width (w/o Trunnion Std. Shoe) 2.55 m 85"2.54 m84" 2.54 m84"Ground Clearance347 mm13.7"415 mm 14"415 mm 14" Blade Types and Widths:Straight 3.66 m 120" Angle Straight 4.27 m 140" Full 25 Angle 3.90 m1210" Universal Semi-U 3.45 m 114" 3.69 m 122" 3.69 m 122" Fuel Tank Refill Capacity 415 L 110 U.S.gal481 L127 U.S.gal481 L127 U.S.gal FTC Fingertip clutch/brake control ***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight. D7G includes ROPS canopy and end track guiding guards. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Track-Type Tractor Sustainability Major structures and components are built to be rebuilt, reducing waste and replacement costs.Edition 421-13PHB-Sec01(pg01-28).indd 1312/14/11 3:44 PM 31. Track-Type Tractors Specifications MODEL D7R LGP D7R Series 2D7R Series 2 XR Flywheel Power 179 kW 240 hp179 kW 240 hp 179 kW240 hp Operating Weight:*Power Shift Differential Steer 27 626 kg60,916 lb 25 455 kg56,129 lb 27 002 kg59,540 lb Engine Model C9 3176C SCAC 3176C SCAC Rated Engine RPM2100 2100 2100 No. of Cylinders666 Bore 112 mm4.4" 124 mm4.92"124 mm4.92" Stroke 149 mm5.9" 140 mm 5.5"140 mm 5.5" Displacement 8.8 L537 in310.3 L629 in3 10.3 L 629 in3 Track Rollers (Each Side) 778 Width of Standard Track Shoe 914 mm 36" 560 mm 22" 610 mm 24" Length of Track on Ground 3.16 m 105" 2.87 m95" 3.05 m 100" Ground Contact Area (w/Std. Shoe)5.78 m28960 in23.21 m24976 in2 3.72 m2 5766 in2 Track Gauge 2235 mm 74" 1.98 m66" 1.98 m66" GENERAL DIMENSIONS:Height** (Stripped Top)*** 2.7 m810" 2.58 m86" 2.58 m86"Height** (To Top of ROPS Canopy) 3.37 m 111" 3.29 m 109" 3.29 m 109"Height** (To Top of ROPS Cab)3.36 m 110" 3.28 m 109" 3.28 m 109"Overall Length (without Blade) 4.73 m 156" 4.73 m 156" 4.73 m 156"with S Blade 5.81 m 191" 5.81 m 191" 5.81 m 191"Width (over Trunnion)3.37 m 111" 2.88 m95" 2.88 m95"Width (w/o Trunnion Std. Shoe) 3.15 m 104" 2.54 m84" 2.59 m86"Ground Clearance495 mm 17"415 mm 14"415 mm 14" Blade Types and Widths:Straight 4.55 m1411" 3.52 m 117" 3.32 m 117"Angle Straight 4.50 m 149" 4.50 m 149"Full 25 Angle 4.12 m 136" 4.12 m 136"Universal 3.98 m 131" 3.98 m 131"Semi-U 3.69 m 122" 3.69 m 122" Fuel Tank Refill Capacity 481 L 127 U.S. gal481 L127 U.S.gal481 L127 U.S.gal ***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight. D7G includes ROPS canopy and end track guiding guards. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. 1-14 Edition 42PHB-Sec01(pg01-28).indd 1412/14/11 3:44 PM 32. Specifications Track-Type Tractors1 MODELD7R Series 2 LGPD8RD8R LGP Flywheel Power 179 kW 240 hp228 kW 305 hp 228 kW305 hp Operating Weight:*Power Shift Differential Steer 27 626 kg60,916 lb 37 580 kg82,850 lb 33 730 kg74,360 lb Engine Model 3176C SCAC 3406C TA 3406C TA Rated Engine RPM2100 2100 2100 No. of Cylinders666 Bore 124 mm4.92"137 mm 5.4"137 mm 5.4" Stroke 140 mm 5.5"165 mm 6.5"165 mm 6.5" Displacement10.3 L629 in314.6 L893 in3 14.6 L 893 in3 Track Rollers (Each Side) 788 ERF 9 Width of Standard Track Shoe 914 mm 36" 610 mm 24" 965 mm 38" Length of Track on Ground3.16 m105" 3.21 m106"3.20 m106" Ground Contact Area (w/Std. Shoe)5.78 m28960 in23.91 m26062 in2 6.2 m29576 in2 Track Gauge2.24 m 74" 2.08 m610"2.34 m78" GENERAL DIMENSIONS:Height** (Stripped Top)***2.70 m810" 2.67 m89" 2.67 m89"Height** (To Top of ROPS Canopy)3.40 m112" 3.51 m116"3.51 m116"Height** (To Top of ROPS Cab) 3.39 m111" 3.45 m113"3.45 m113"Overall Length (with SU Blade) 6.91 m228"6.91 m228"(without Blade) 4.93 m162"4.93 m162"Overall Length (without Blade)4.73 m156" (with S Blade)5.81 m191" Width (over Trunnion) 3.37 m111" 3.05 m100"3.55 m117"Width (w/o Trunnion Std. Shoe)3.15 m104" 2.70 m88" 3.30 m1010"Ground Clearance495 mm 17"606 mm 111" 574 mm 111" Blade Types and Widths:Straight4.55 m 1411" Angle Straight 4.99 m164"Full 25 Angle 4.52 m1410" Universal 4.26 m140"Semi-U 3.94 m1211" 4.40 m145" Fuel Tank Refill Capacity 481 L 127 U.S.gal625 L165 U.S.gal625 L165 U.S.gal ***Operating weight includes cab, operator, lubricants, coolant, full fuel tank, standard track, hydraulic controls and fluid, SU blade, drawbar and counterweight. *** D8R equipped with track guides, ROPS/FOPS cab, single shank ripper and SU blade. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar.ERF Extended Track Roller Frame. Extends frame 302 mm (11.9"), adds 3 track sections and 2 rollers/side. Track-Type Tractor Sustainability Cat tractors are designed for ease of serviceability, with features like ground-level service points and wide engine enclosure doors.Edition 421-15PHB-Sec01(pg01-28).indd 15 12/14/11 3:44 PM 33. Track-Type TractorsSpecifications MODELD8TD8T LGP D8T D8T LGP Engine Emissions Tier Tier 4 Interim/Tier 4 Interim/Stage IIIB Stage IIIB Flywheel Power 231 kW 310 hp 231 kW 310 hp231 kW 310 hp231 kW 310 hp Operating Weight:*Power Shift Differential Steer 38 488 kg 84,850 lb 38 488 kg 84,850 lb38 941 kg 85,850 lb 38 941 kg85,850 lb Engine ModelC15 ACERT C15 ACERTC15 ACERTC15 ACERT Rated Engine RPM 18501850 1850 1850 No. of Cylinders6 666 Bore137 mm 5.4"137 mm5.4" 137 mm5.4"137 mm 5.4" Stroke172 mm6.75"172 mm 6.75" 172 mm 6.75"172 mm6.75" Displacement15.2 L928 in3 15.2 L928 in315.2 L928 in315.2 L928 in3 Track Rollers (Each Side) 8 888 Width of Standard Track Shoe610 mm 24" 965 mm38"610 mm24" 965 mm 38" Length of Track on Ground3.21 m 106" 3.20 m106" 3.21 m 106" 3.20 m 106" Ground Contact Area (w/Std. Shoe)3.91 m26062 in26.2 m29576 in23.91 m26062 in26.2 m2 9576 in2 Track Gauge2.08 m 610" 2.34 m 78" 2.08 m 610" 2.34 m78" GENERAL DIMENSIONS:Height** (Stripped Top)***2.67 m89" 2.67 m 89" 2.67 m89" 2.67 m89"Height**(To Top of ROPS Canopy) 3.46 m 114" 3.45 m114" 3.46 m 114" 3.45 m 114"Height** (To Top of ROPS Cab) 3.46 m 114" 3.45 m114" 3.46 m 114" 3.45 m 114"Overall Length (with SU Blade) 6.09 m 200" 6.09 m200" 6.09 m 200" 6.09 m 200"(without Blade) 4.64 m 153" 4.98 m164" 4.64 m 153" 4.98 m 164"Width (over Trunnion) 3.06 m 100" 3.06 m100" 3.06 m 100" 3.06 m 100"Width (w/o Trunnion Std. Shoe)2.64 m88" 2.64 m 88" 2.64 m88" 2.64 m88"Ground Clearance 618 mm 24"609 mm20" 618 mm24"609 mm 20" Blade Types and Widths:Angle Straight4.99 m 164" 4.99 m 164"Full 25 Angle4.52 m 1410" 4.52 m 1410" Universal 4.26 m 140" 4.26 m 140"Semi-U3.94 m 1211"4.40 m145" 3.94 m 1211"4.40 m 145" Fuel Tank Refill Capacity 643 L 170643 L170643 L 170643 L 170 U.S.galU.S.gal U.S.gal U.S.gal ***Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, semi universal blade with tilt, back-upalarm, seat belts, lights, rigid drawbar and front towing device. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar. Track-Type Tractor Sustainability Cat engines with ACERT Technology provide powerful reliability, while meeting the toughest emissions standards. 1-16Edition 42PHB-Sec01(pg01-28).indd 1612/14/11 3:44 PM 34. Specifications Track-Type Tractors 1 MODEL D9R D9T Flywheel Power 302 kW 405 hp 306 kW410 hp Operating Weight:*Power Shift Clutch Brake48 784 kg 107,548 lb Power Shift Differential Steer47 900 kg105,600 lb Engine Model 3408C SCACC18 ACERT Rated Engine RPM19001800 No. of Cylinders86 Bore137 mm5.4" 145 mm5.7" Stroke152 mm 6"183 mm7.2" Displacement 18 L 1099 in318.1 L1104 in3 Track Rollers (Each Side) 88 Width of Standard Track Shoe610 mm24"610 mm24" Length of Track on Ground3.47 m115"3.47 m115" Ground Contact Area (w/Std. Shoe)4.24 m26569 in2 4.24 m26569 in2 Track Gauge2.25 m 75"2.25 m 75" GENERAL DIMENSIONS:Height** (Stripped Top)***3.00 m910"Height** (To Top of ROPS Canopy)3.99 m131"4.00 m131"Height** (To Top of ROPS Cab) 3.82 m126"3.82 m126"Overall Length (with SU Blade) 6.84 m225"(without Blade) 5.18 m170"(with SU Blade and Ripper)6.63 m 2110"(without Blade and Ripper)4.91 m161"Width (over Trunnion) 3.30 m1010" 3.31 m 1011"Width (w/o Trunnion Std. Shoe)2.93 m 98"2.87 m 95"Ground Clearance 591 mm 111"596 mm 111" Blade Types and Widths:Universal 4.65 m153"4.65 m153"Semi-U4.31 m142"4.31 m142" Fuel Tank Refill Capacity 818 L216 U.S.gal 889 L 235 U.S.gal ***Operating weight includes ROPS canopy, operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, semi universal blade with tilt, back-upalarm, seat belts, lights, rigid drawbar and front towing device. *** D9R equipped with track guides, ROPS/FOPS cab, single shank ripper and SU blade. ***Dimensions measured from ground line. Add grouser height for total dimension on hard surfaces. ***Height (Stripped Top) without ROPS canopy, exhaust, seat back or other easily removed encumbrances. Includes drawbar. * SAE J1234.Edition 421-17PHB-Sec01(pg01-28).indd 1712/14/11 3:44 PM 35. Track-Type TractorsSpecifications MODEL D10T D11TD11T CD Flywheel Power433 kW 580 hp634 kW 850 hp634 kW 850 hp Operating Weight:*Power Shift Clutch Brake66 451 kg 146,500 lb104 600 kg 230,100 lb113 000 kg 248,600 lb Engine Model C27 ACERTC32 ACERT C32 ACERT Rated Engine RPM 18001800 1800 No. of Cylinders12 12 12 Bore137 mm5.4" 145 mm5.71"145 mm5.71" Stroke152 mm 6"162 mm6.38"162 mm6.38" Displacement27 L1647.5 in332.1 L1959 in3 32.1 L1959 in3 Track Rollers (Each Side)88 8 Width of Standard Track Shoe610 mm 24" 710 mm 28" 915 mm 36" Length of Track on Ground (Idler to Idler) 3.88 m 129"4.44 m147"4.44 m147" Ground Contact Area (w/Std. Shoe) 4.74 m27347 in26.31 m29781 in2 8.1 m2 12,581 in2 Track Gauge2.55 m84"2.89 m 96"2.89 m 96" GENERAL DIMENSIONS:Height (Stripped Top)**3.222 m 107"3.64 m1111" 3.64 m1111"Height (To Top of ROPS Canopy)4.26 m 140"4.60 m151"4.60 m151"Height (To Top of ROPS Cab) 4.01 m 132"4.29 m141"4.29 m141"Overall Length:(with SU Blade and SS Ripper)***9.16 m 301"10.59 m 349"10.70 m 351"(without Blade and Ripper)5.331 m 176"6.03 m199"6.03 m199"Width (over Trunnion) 3.74 m 123"4.38 m144"4.38 m144"Width (w/o Trunnion Std. Shoe)3.30 m1010"3.78 m125"3.81 m126"Ground Clearance 571 mm110"574 mm111"574 mm111" Blade Types and Widths:CarryDozer 6.71 m220"Universal 5.26 m 173"6.36 m 2010"Semi-U4.86 m1511"5.60 m184" Fuel Tank Refill Capacity1204 L318 U.S.gal 1609 L425 U.S.gal1609 L 425 U.S.gal Fuel Tank Refill Capacity (Extra Capacity) 1987 L505 U.S.gal 1987 L505 U.S.gal ***Operating weight includes operator, lubricants, coolant, full fuel tank, hydraulic controls and fluids, SU blade with tilt, back-up alarm, seat belts, lights,rigid drawbar and front towing device. ***Height (Stripped Top) without ROPS canopy, cab, exhaust, lift cylinders, seat back or other easily removed encumbrances. ***Overall length of D11T CD includes Straight (CarryDozer) Blade and SS Ripper.Overall length of machine from front tag link trunion to rigid drawbar and excludeds track grouser height. SAE J1234. All dimensions are approximate. 1-18Edition 42PHB-Sec01(pg01-28).indd 18 12/14/11 3:44 PM 36. Drawbar Pull vs. Ground SpeedTrack-Type Tractors Hydrostatic Drive1 D3K XL (LRC) D4K XL (LRC) D3K LGP (LRC)D4K LGP (LRC)lb N lb N 1000 10001000 1000180 140 38.329.3160 120 33.824.8 DRAWBAR PULL140 100 29.320.3DRAWBAR PULL12080 24.815.810060 20.311.3 8040 15.8 6.8 6020 11.3 2.3 40 0 1 3 5 7 9 km/h 6.8 0 1.2 2.5 3.7 5.0 6.2 mph 20 SPEED2.301 3 5 7 9 km/h0 1.2 2.5 3.7 5.0 6.2 mphSPEED D5K XL (LRC) D5K LGP (LRC)lb N 1000 1000 18038.3 16033.8 140 NOTES: Usable pull will depend upon weight and29.3traction of equipped tractor. DRAWBAR PULL 12024.8Assumes sufficient machine weight for 100