PHASE | VISLINKMantis 1 20 Flyaway Antenna System The World’s Most Popular Flyaway Solution 1.2m...

PHASE | VISLINK:

Satcom

MANTIS Flyaway Antennae………………………………..p. 2

MANTIS M-SAT Man Portable Data Terminal…………...p. 8

FLYDRIVE Motorized Flyaway Antenna........................p. 12

NEWSWIFT Motorized Flyaway Antennae.....................p. 14

AUC5000 Block Converter.......................................…..p. 22

APS5000 Protection Switch......................................….p. 22

ACU Antenna Control Unit.............................................p. 24

ADM5100 Satellite MESH Modem……………………….p. 26

NEWSTREAM Multi-Mode Van/OB Transmit System…p. 28

IRD5200 DVB-S2 Receiver w/ H.264/MPEG2………….p. 30

UltraCoder HEVC Encoder……………………p. 32

UltraDecoder HEVC Decoder…………………p. 34

Mantis 120 Flyaway Antenna SystemThe World’s Most Popular Flyaway Solution

1.2m Mantis

Key Features

■ Manufactured using latest carbon fibre composite materials for minimum weight

■ Easily deployed by a single user ■ Compact design, IATA weight compliant options

Typical Applications

■ Satellite Newsgathering ■ Remote Newsgathering

OVERVIEWA comprehensive range of lightweight, compact satellite terminals for all transportable applications.

BENEFITS ■ Available in single, dual, tri and quad band configurations

■ Bands available X, Ku & DBS

■ Fully compliant with all satellite operator specifications

■ Electronics available in single thread, power combined or 1:1 redundant configuration

■ Antennas are approved for use with most Satellite operators

■ Variety of uplink electronics pac-ges available

■ Available in most colours to order

■ Co-polar Rx available on Ku antennas

■ Second Rx port available on C Band linear antennas

SPECIFICATIONS

1.2m MANTIS

CONFIGURATION ■ Offset fed

FREQUENCY

X: ■ Tx 7.9 to 8.4 GHz ■ Rx 7.25 to 7.75 GHz

Ku: ■ Tx 13.75 to 14.5 GHz (option from 12.75 GHz)

■ Rx 10.95 to 12.75 GHz

DBS: ■ Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

■ Rx 10.95 to 12.75 GHz

TX GAIN

X: ■ Tx 38.4 dBi typ @ 8.15 GHz

Ku: ■ Tx 43.3 dBi typ @ 14.25 GHz

DBS: ■ Tx 45.2 dBi typ @ 17.85 GHz

G/T

X: ■ 7.40 GHz = 15.3 dBk (assumes LNA 50 dB Gain 0.8 dB NF)

Ku: ■ 11.20 GHz = 19.2 dBk (assumes LNB 60 dB gain 0.7 dB NF)

DBS: ■ 11.20 GHz = 19.2 dBk (assumes LNB 60 dB Gain 0.7 dB NF)

MEETS THE REQUIREMENTS OF ■ ITU-R S.580-6 ■ ITU-R S.465-5 ■ INTELSAT IESS-601 ■ EUTELSAT ESS-502 ■ MIL STD 188-164A ■ STANAG 4484 (as applicable)

CROSS POLARISATION ISOLATION

X Band Circular ■ 30 dB Tx (axial ratio 1.07) ■ 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear ■ -35 dB

PORT TO PORT ISOLATION

X: ■ Tx / Rx 20 dB (100 dB incl filter)

■ Rx / Tx 20 dB

Ku: ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

DBS: ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

MECHANICAL

Mount: ■ Elevation over azimuth

Operation ■ Manual

MANUAL MOVEMENT

Azimuth adjustment: ■ +/- 180° coarse adjust, +/- 2.5° fine adjust

Elevation adjustment: ■ 0° to 90°(with adjustable mount elevation)

Polarisation adjustment: ■ +/-95° (Linear polarisation only)

STANDARD DIMENSIONS & WEIGHTS

Single case ■ Dimensions

■ 495 x 1050 x 650mm [19.5” x 41.3” x 25.6”]

■ Weight ■ <43 kg (94.8 lbs)

IATA DIMENSIONS & WEIGHTS

Standard case ■ Dimensions

■ 800 x 600 x 250 mm [31.5” x 23.6” x 9.8”]

■ Weight ■ <20 kg (44 lbs)

Rugged case ■ Dimensions

■ 850 x 650 x 320 mm [33.5” x 25.6” x 12.6”]

■ Weight ■ <30Kg (66 lbs) including op

Antenna case ■ Dimensions

■ 495 x 1050 x 650 mm

[19.5” x 41.3” x 25.6”] ■ Weight

■ 31.9 kg [70.3 lbs]

Feedarm case ■ Dimensions

■ 1290 x 340 x 135 mm [50.8” x 13.3” x 5.3”]

■ Weight ■ 16.95 kg [37.4lbs]

Petal & Waveguide Softpack ■ Dimensions

■ 1160 x 570 x 230 mm [45.7” x 22.4” x 9”]

■ Weight ■ 12 kg [26.5 lbs]

TEMPERATURE

Operational: ■ –20°C to +60°C (-4°F to 140°F)

Transport: ■ –40°C to +70°C(-40°F to 158°F)

WINDSPEEDS

Operational: ■ 14 m/s (30 mph)

Survival: ■ 27 m/s (60 mph)

HUMIDTY ■ 0 to 100% RH

© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to

change specifications without notice. Please contact your representative to confirm current specifications.02/15 ENGRD001520 Rev 2

www.vislink.com • [email protected]

Mantis 190/240 Flyaway Antenna SystemThe World’s Most Popular Flyaway Solution

Key Features

■ Manufactured using latest carbon fibre composite materials for minimum weight

■ Easily deployed by a single user ■ Compact design, IATA weight compliant options


■ Satellite Newsgathering ■ Remote Newsgathering

OVERVIEWA comprehensive range of lightweight, compact satellite terminals for all transportable applications.

BENEFITS ■ Mantis is available in 1.9m and 2.4m antenna sizes

■ Available in single, dual, tri and quad band configurations

■ Bands available:

• 1.9m - C, X, Ku & DBS

• 2.4m - C, X, Ku & DBS

■ Fully compliant with all satellite operator specifications

■ Motorised tracking option for inclined orbit operation

■ Electronics available in single thread, power combined or 1:1 redundant configuration

■ Antennas are approved for use with most Satellite operators

■ Variety of uplink electronics packages available

■ Available in most colours to order

■ Co-polar Rx available on Ku antennas

■ Second Rx port available on C Band linear antennas

1.9m Mantis

SPECIFICATIONS

1.9m MANTIS

TYPE ■ Circular (axially symmetric) segmented

CONFIGURATION ■ Prime focus

MEETS THE REQUIREMENTS OF ■ ITU-R S.580-6 ■ ITU-R S.465-5 ■ INTELSAT IESS-601 ■ EUTELSAT ESS-502 ■ MIL STD 188-164A ■ STANAG 4484 (as applicable)

MECHANICALMount:

■ Elevation over azimuth

OPERATION ■ Manual and/or 2 axis motorisation

MOVEMENTAzimuth adjustment:

■ +/– 180° coarse adjust (restricted elevation), +/– 2.5° fine adjust


Polarisation adjustment: ■ +/– 95° (Linear polarisation only)

FREQUENCYC CP:

■ Tx 5.85 to 6.425 GHz ■ Rx 3.625 to 4.2 GHz

C LP: ■ Tx 5.85 to 6.65 GHz (option to 6.725 GHz)

■ Rx 3.40 to 4.2 GHz

X: ■ Tx 7.9 to 8.4 GHz ■ Rx 7.25 to 7.75 GHz


■ Rx 10.70 to 12.75 GHzDBS:

■ Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

■ Rx 10.70 to 12.75 GHz

TX GAINC:

■ Tx 40.1 dBi typ @ 6.25 GHzX:

■ Tx 42.4 dBi typ @ 8.15 GHzKu:

■ Tx 47.2 dBi typ @ 14.25 GHzDBS:

■ Tx 49.2 dBi typ @ 17.85 GHz

G/TC:

■ 3.95 GHz = 15.0 dBk (assumes LNB 60 dB Gain 0.5 db NF)

X: ■ 7.40 GHz = 19.3 dBk (assumes LNA 50 dB Gain 0.8 dB NF)



CROSS POLARISATION ISOLATIONC Band Linear

■ –30 dB Tx / Rx

C and X Band Ciruclar ■ 30 dB Tx (axial ratio 1.07) ■ 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear ■ –35 dB

PORT TO PORT ISOLATIONC Band Linear

■ Tx / Rx 35 dB (90 dB incl filter) ■ Rx / Tx 35 dB

C Band Circular ■ Tx / Rx 20 dB (80 dB incl filter) ■ Rx / Tx 20 dB

X Band ■ Tx / Rx 20 dB (100 dB incl filter) ■ Rx / Tx 20 dB

Ku Band ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

DBS Band ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

STANDARD DIMENSIONS & WEIGHTSMount case

■ Dimensions ■ 540 x 540 x 510 mm [21.2” x 21.2” x 20 in”]


Segment case ■ Dimensions

■ 810 x 810 x 490 mm [31.9” x 31.9” x 19.2”]

■ Weight ■ 54 kg [119 lbs]

IATA DIMENSIONS & WEIGHTSMount case

■ Dimensions ■ 540 x 540 x 510 mm [21.2” x 21.2” x 20”]

■ Weight ■ 29.5 kg [65 lbs]

Hub & Segment case ■ Dimensions

■ 810 x 810 x 490 mm [31.9” x 31.9” x 19.2”]


Feedarm & Segment case ■ Dimensions

■ 900 x 765 x 365 mm [35.4” x 30.1” x 14.4”]


ENVIRONMENTAL

TEMPERATUREOperational:

■ -20°C to +60°C (-4°F to 140°F)Transport:

■ -40°C to +70°C (-40°F to 158°F)

WINDSPEEDSOperational:

■ 12 m/s (27 mph)Survival:

■ 20 m/s (45 mph)

HUMIDTY ■ 0 to 100% RH

2.4m MANTIS

Type ■ Circular (axially symmetric) segmented

Configuration ■ Prime focus

Meets The Requirements of ■ ITU-R S.580-6 ■ ITU-R S.465-5 ■ INTELSAT IESS-601 ■ EUTELSAT ESS-502 ■ MIL STD 188-164A ■ STANAG 4484 (as applicable)

FrequencyC CP:

■ Tx 5.85 to 6.425 GHz ■ Rx 3.625 to 4.2 GHz

C LP: ■ Tx 5.85 to 6.65 GHz (option to 6.725 GHz)

■ Rx 3.40 to 4.2 GHzX:

■ Tx 7.9 to 8.4 GHz ■ Rx 7.25 to 7.75 GHz


■ Rx 10.70 to 12.75 GHzDBS:

■ Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

■ Rx 10.70 to 12.75 GHz

Tx GainC:

■ Tx 42.1 dBi typ @ 6.25 GHzX:

■ Tx 44.4 dBi typ @ 8.15 GHzKu:

■ Tx 49.3 dBi typ @ 14.25 GHz

DBS: ■ Tx 51.2 dBi typ @ 17.85 GHz

G/TC:

■ 3.95 GHz = 17.0 dBk (assumes LNB 60 dB Gain 0.5 db NF)

■ X;7.40 GHz = 21.4 dBk (assumes LNA 50 dB Gain 0.8 dB NF)



Cross Polarisation IsolationC Band Linear

■ -30 dB Tx / Rx C and X Band Ciruclar

■ 30 dB Tx (axial ratio 1.07) ■ 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear ■ -35 dB

Port to Port IsolationC Band Linear

■ Tx / Rx 35 dB (90 dB incl filter) ■ Rx / Tx 35 dB

C Band Circular ■ Tx / Rx 20 dB (80 dB incl filter) ■ Rx / Tx 20 dB

X Band ■ Tx / Rx 20 dB (100 dB incl filter) ■ Rx / Tx 20 dB

Ku Band ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

DBS Band ■ Tx / Rx 40 dB (110 dB incl filter) ■ Rx / Tx 30 dB

MechanicalMount:

■ Elevation over azimuth

Operation ■ Manual and/or 2 axis motorisation

MovementAzimuth adjustment:

■ +/– 180° coarse adjust, (restricted elevation) +/- 2.5° fine adjust


Polarisation adjustment: ■ +/-95° (Linear polarisation only)

Standard Dimensions & WeightsMount case

■ Dimensions ■ 540 x 540 x 670 mm [21.2” x 21.2” x 26.4”]


Segment case (qty 2) ■ Dimensions

■ 990 x 990 x 490 mm [39” x 39” x 19.2”]


IATA Dimensions & WeightsMount case

■ Dimensions ■ 540 x 540 x 670 mm [21.2” x 21.2” x 26.4”]


Hub case: ■ Dimensions

■ 990 x 990 x 490 mm [39” x 39” x 19.5”]


Segement softbag (qty 3) ■ Dimensions

■ 1030 x 960 x 440 mm [40.5” x 37.8” x 17.3”]

■ Weight ■ 25.3 kg [55.7 lbs]

Feedarm & catridge case (C-band only) ■ Dimensions

■ 1130 x 650 x 185 mm [44.5” x 25.6” x 7.2”]


TemperatureOperational:

■ –20°C to +60°C (–4°F to 140°F)Transport:

■ –40°C to +70°C (–40°F to 158°F)

WindspeedsOperational:

■ 14 m/s (30 mph)Survival:

■ 27 m/s (60 mph)

Humidty ■ 0 to 100% RH




Mantis LTUltra-lightweight Antenna

The Mantis LT Man antenna is a highly portable tri-band satellite antenna system designed for rapid deployment. Available with either a 90 or 120cm reflector its small size and weight makes it ideal for secure and non-secure satellite communications for a variety of applications.

Key Features

■ X, Ku & Ka Bands■ 90 or 120cm Reflector■ Man Portable Design■ Less than 5 minute Set-up time■ ITAR Free


■ Satellite News-gathering■ Secure Military Communications■ First on Scene Broadcast■ Emergency Services■ Disaster Recovery

SPECIFICATIONS

04/16 - Rev 3RD001635

© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

www.vislink.com n [email protected]

X-BandTx Frequency Band

■ 7.9-8.4 GHz

Rx Frequency Band ■ 7.25-7.75 GHz

Polarization: ■ Tx – RHCP or LHCP configurable

■ Rx – Orthogonal to Tx

Axial Ratio ■ <2.0dB (Tx), <1.2dB (Rx)

90cm Version:

Tx Gain @ 8.15 GHz■ 35.3 dBW

G/T @ 7.5 GHz■ 13 dB/K

120cm Version

Tx Gain @ 8.15 GHz ■ 37.8 dBW

G/T @ 7.5 GHz ■ 15.5 dB/K

Ku-BandTx Frequency Band

■ 13.75-14.5 GHz


Polarization ■ Tx - Linear H/V


X-Polar ■ 30 dB

90cm Version:

Tx Gain @ 14.125 GHz■ 40.1 dBW (25W)

G/T @ 11.7 GHz■ 18 dB/K

120cm Version

Tx Gain @ 14.125 GHz■ 42.6 dBW (40W)

G/T @ 11.7 GHz■ 20.5 dB/K

Physical SpecificationTransportability

■ One airline checkable case

Weight90cm version:

■ 10.5 kg / <23lbs (without carry case)

120cm version:

■ 14.5 kg / <31lbs (without carry case)

■ IATA compliant

Packing ■ Optional Rucksack or rugged carry case in one or two box solution depending on reflector size

Operating Temperature: ■ -20°C to +60°C

Storage Temperature: ■ -40°C to +80°C

Operating Altitude: ■ 3000m

Survival Altitude: ■ 4500m

Vibration:■ MIL-810F Method 514.1 procedure I

Sand/Dust■ DEF STAN 00-35, Pt 3, Iss 4, Test

CL25

Water Ingress■ DEF STAN 00-35, Pt 3, Iss 4, Test

CL27

CE markedRadiation Pattern Compliance■ ITU-R S.465.5 and S.580-6 (90 &

120cm)

■ FCC 25.209 with 25.212 (90cm & 120cm)

■ ETSI EN 301.358 (90 & 120cm)

■ INTELSAT IESS-601 (90cm)


■ Registered with Intelsat, Eutelsat, Optus and Arabsat

Operating Wind Speed (No ballast) ■ 25mph

Operating Wind Speed (With ballast)

■ 45mph

Shock ■ MIL-810F Method 513.5 procedure IV

Environmental Specification

Ka-BandTx Frequency Band

■ 27-31 GHz


Polarization ■ Tx – RHCP or LHCP configurable



90cm Version:

Tx Gain @ 30.5 GHz ■ 46.8 dBW (10W)

G/T @ 20.7 GHz ■ 21.3 dB/K

120cm Version

Tx Gain @ 30.5 GHz ■ 49.3 dBW (10W)

G/T @ 20.7 GHz ■ 24.0 dB/KTx Frequency Band

Mantis MSATMan Portable Data Terminal

This satellite antenna system is specifically designed for speed, ease of use and portability.

The Mantis MSAT is a lightweight. Satellite terminal that can be set-up anywhere to provide secure and non-secure data and video transmission in as little as five minutes. It supports X and Ku-Band configurations ensuring worldwide coverage is available at all times. Frequency bands can be swapped in the field in under a minute.

The Mantis MSAT is available with either a 65, 90 or 120cm reflector and is ideal for a variety of applications.

■ X, Ku, (Ka, 65cm only) Frequency Bands ■ Man Portable, IATA Compliant ■ Mains or Battery Operation ■ 5 Minutes to Air ■ 65, 90, 120cm Reflectors ■ ITAR Free

Key Features Typical Applications

■ Satellite News-gathering ■ Secure Military Communications ■ First on Scene Broadcast ■ Emergency Services ■ Disaster Recovery

0516 - Rev 3.1RD001677


SPECIFICATIONS

Power Requirements ■ 10-36V DC

■ 90 – 260 VAC

■ 280W (Max)

■ External Battery Pack Option for DC Units

Note: 10-36V DC available with 20W X Band and 8W (and lower) Ku Band terminals)

Modems ■ Modems may be exchanged at base level maintenance.

Modem Options ■ iDirect e850mp

■ Comtech DMD1050

■ Paradise–Q-Lite modem

■ Elbit – Shiron modem

Video Encoder Option ■ Advent DVE 5100 (H.264)

Certification ■ Skynet 5 (X-Band)

■ WGS (X & Ka Band)–Planned

Control Interface ■ Simple two button operator interface for field level control. Embedded web server for control and Management using external PC for initial base level configuration.

Alignment ■ Interactive user interface providing look angle directions for the selected satellite using positional information from an internal GPS receiver. Integrated beacon receiver provides signal strength for peaking..

Interfaces ■ DC Power (Configuration dependent)

■ AC Power

■ L- Band Tx Interface (External Modem)

■ L-Band Rx Monitor

■ L-Band Modem Output

■ RJ45 Ethernet (x2)

■ EIA-530 (Modem dependant)

■ DVE Encoder version with SDI Input

Common Specification




90cm version: ■ 15 kg / < 33lbs (without carry case)

■ IATA compliant

120cm version: ■ 19 kg / < 42lbs (without carry case)

■ IATA compliant

Weight65cm version:

■ 12.5 kg / 27.5lbs (without carry case)

■ IATA compliant







■ 45mph

Humidity: ■ MIL-810F

EMC ■ BS EN61000–6–3–2007

■ BS EN61000–6–1–2007

CE marked Radiation Pattern Compliance

■ ITU-R S.465.5 and S.580-6 (65, 90 & 120cm)

■ FCC 25.209 with 25.212 (65, 90cm & 120cm)

■ ETSI EN 301.358 (65 & 90 & 120cm)

■ ETSI EN 301.35 (65cm)

■ MIL-STD-188-164A (65cm)




IP Rating: ■ IP65

Shock: ■ MIL-810F (in transport packaging)

Vibration: ■ MIL-810F (in transport packaging)

Sand/Dust ■ DEF STAN 00-35, Pt 3, Iss 4, Test CL25

Water Ingress ■ DEF STAN 00-35, Pt 3, Iss 4, Test CL27




■ 7.9-8.4 GHz

Rx Frequency ■ 7.25-7.75 GHz

EIRP (sat) @ 8.15GHz ■ 45.3 dBW (65cm version)

■ 48.1 dBW (90cm version)


G/T @ 7.5GHz ■ 12.8 dB/K (65cm version)

■ 12.8 dB/K (90cm version)


Polarisation ■ Tx – RHCP or LHCP configurable



Tx Spurious (Carrier Related) ■ <-60 dBc

Tx Spurious (Non Carrier Related) ■ <-60 dBm

BUC Power (saturated) ■ 25 W


■ 13.75-14.5 GHz

Rx Frequency Bands ■ From 10.7-12.75

EIRP (sat) @ 14.125GHz ■ 46.2 dBW (8W) (65cm version)

■ 54.2 dBW (25W) (90cm version)





Polarisation ■ Linear H/V

■ Tx orthogonal to Rx

Cross Polarization Isolation ■ 30db

Tx Spurious (Carrier Related) ■ <-60dBc

Tx Spurious (Non Carrier Related) ■ <-70dBc

BUC Power ■ 3W - 40W

Motorised Mantis MSATMan Portable Data Terminal

This satellite antenna system is specifically designed for speed, ease of use and portability.

The Motorised Mantis MSAT is a lightweight. Satellite terminal that can be set-up anywhere to provide secure and non-secure data and video transmission in as little as five minutes. It supports X and Ku-Band configurations ensuring worldwide coverage is available at all times. Frequency bands can be swapped in the field in under a minute. Designed for rapid deployment in hostile environments and now has a full 1 button auto acquire operation.

The Mantis MSAT is available with either a 90 or 120cm reflector and is ideal for a variety of applications.

■ 1 Button Auto Acquire ■ 3 Axis simultaneous motorisation ■ X, Ku Frequency Bands ■ Mains or Battery Operation ■ 5 Minutes to Air ■ 90, 120cm Reflectors ■ ITAR Free, IATA Compliant

Key Features Typical Applications

■ Satellite News-gathering ■ Secure Military Communications ■ First on Scene Broadcast ■ Emergency Services ■ Disaster Recovery

04/16 - Rev 3RD001676


SPECIFICATIONS

Power Requirements ■ 90 – 260 VAC

■ 280W (Max)

■ External Battery Pack Option for DC Units

Note: 10-36V DC available with 20W X Band and 8W (and lower) Ku Band terminals)

Modems ■ Modems may be exchanged at base level maintenance.

Modem Options ■ iDirect e850mp

■ Comtech DMD1050

■ Paradise–Q-Lite modem

■ Elbit – Shiron modem

Video Encoder Option ■ Advent DVE 5100 (H.264)

Certification ■ Skynet 5 (X-Band)

■ WGS (X & Ka Band)–Planned

Control Interface ■ Embedded web server for control and management using external PC for initial base level configuration. Simple two button operator interface for field level control.

Alignment ■ One button auto acquire, using integrated GPS, compass and beacon / carrier receiver.

Interfaces ■ DC Power (Configuration dependent)

■ AC Power

■ L- Band Tx Interface (External Modem)

■ L-Band Rx Monitor

■ L-Band Modem Output

■ RJ45 Ethernet (x2)

■ EIA-530 (Modem dependant)

■ DVE Encoder version with SDI Input

Common Specification




120cm version: ■ 25 / < 56 lbs (without carry case)

■ IATA compliant

Weight90cm version:

■ 23 kg / < 51 lbs (without carry case)

■ IATA compliant







■ 45mph

Humidity: ■ MIL-810F

EMC ■ BS EN61000–6–3–2007

■ BS EN61000–6–1–2007

CE marked Radiation Pattern Compliance

■ ITU-R S.465.5 and S.580-6 (65, 90 & 120cm)

■ FCC 25.209 with 25.212 (65, 90cm & 120cm)

■ ETSI EN 301.358 (65 & 90 & 120cm)

■ ETSI EN 301.35 (65cm)

■ MIL-STD-188-164A (65cm)




IP Rating: ■ IP65

Shock: ■ MIL-810F (in transport packaging)

Vibration: ■ MIL-810F (in transport packaging)

Sand/Dust ■ DEF STAN 00-35, Pt 3, Iss 4, Test CL25

Water Ingress ■ DEF STAN 00-35, Pt 3, Iss 4, Test CL27




■ 7.9-8.4 GHz

Rx Frequency ■ 7.25-7.75 GHz

EIRP (sat) @ 8.15GHz ■ 48.1 dBW (90cm version)




Polarisation ■ Tx – RHCP or LHCP configurable



Tx Spurious (Carrier Related) ■ <-60 dBc

Tx Spurious (Non Carrier Related) ■ <-60 dBm

BUC Power (saturated) ■ 25 W


■ 13.75-14.5 GHz

Rx Frequency Bands ■ From 10.7-12.75

EIRP (sat) @ 14.125GHz ■ 54.2 dBW (25W) (90cm version)




Polarisation ■ Linear H/V

■ Tx orthogonal to Rx

Cross Polarization Isolation ■ 30db

Tx Spurious (Carrier Related) ■ <-60dBc

Tx Spurious (Non Carrier Related) ■ <-70dBc

BUC Power ■ 3W - 40W

VISLIN

K N

ews and Entertainm

ent

FeaturesAvailable with 1:2m or 1.5m relfector•Bands available•

1.2m - X, Ku, DBS & Ka ƌ1.5m - C, X, Ku, DBS & Ka ƌ

IATA weight compliant• 1.2m - two cases ƌ1.5m - three cases ƌ

Satellite auto acquistion & tracking •packages availableEasily deployed by a single user •Canbeusedasaflyawayorsemi-•permanent vehicle mounted antenna systemDrive control housed within main •antenna caseCombines with half rack 5000 series •system electronicsSoftware upgradeable for Auto-Acquire •(ACU5216) and integral ASI DemodOption for multi-band capability by feed •cartridge exchangeOption for integral BUC with antenna •for single thread operation enabling HPA FSK control via TX L-Band

AFD120 & AFD150 FlyDrive Motorised Flyaway Antenna

OverviewThe ADVENT FlyDrive Antenna is the newest in the range of antenna solutions on offer. The FlyDrive is designed to function as a traditional flyaway as well as a semi-permanent vehicle mounted system. The FlyDrive draws on technology and design innovations of the well known and field proven Mantis Flyaway and NewSwift antennas.

Advent has made its FlyDrive as easy as possible to operate. It offers full 3-axis motorised control with manual backup, satellite auto acquisition and tracking, with GPS if required. The FlyDrive can be fitted easily to most vehicle roof racks using standard fittings.

The FlyDrive is easily transported in IATA weight compliant flight cases so that it can be taken on a commercial airline, for quick deployment by a single user anywhere in the world.

ADVENT’s FlyDrive is fully adjustable, to +/- 200º azimuth, elevation 6º to 92º and polarisation adjustment +/- 95º. The drive control unit (DCU5000) is housed within the main antenna case, which makes this antenna very compact for operation in the field. The electronics for ADVENT FlyDrive’s are available in single thread, power combined or 1:1 redundant configurations. Advent’s 5000 range of electronics package compliments the FlyDrive perfectly. The 5000 series are half the width of a standard 19” rack mounted unit, a major advantage where space and weight are critical. For further information on the 5000 series of electronics please see separate datasheet.

High performance solution for rapid response

www.vislink.com© 2009 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations.

Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 4/1/2010

SpecificationsConfigurationOffset fed

MountElevation over azimuth

Meets The Requirements ofITU-R S.580-6ITU-R S.465-5INTELSAT IESS-601EUTELSAT EESS-502MIL STD 188-164ASTANAG 4484(as applicable)]

Antenna Position ControlFull 3 axis motor control with manual override mechanism

Azimuth Adjustment+/- 200°

Elevation Adjustment6° to 92°

Polarisation Adjustment+/- 95°

Antenna Control UnitSerial remote interface•‘One touch’ stow & deploy•Fast / med / slow motor drive •systemSimultaneous positional feed-•back of Azimuth / Elevation / Polarisation axis with true elevation reading from calibrated inclinometerGPS based auto satellite acquisi-•tion package

TemperatureOperational . . . . . . . . .-20°C to +60°C . . . . . . . . . . . . . . . . . . . (-4°F to 140°F)Transport . . . . . . . . . . .-40°C to +70°C . . . . . . . . . . . . . . . . . . (-40°F to 158°F)

Humidty:0 to 100% RH

OptionsGPS based auto-acquire upgrade •package

AFD120 FLYDRIVE

FrequencyX: . . . . . . . . . . . . . . .Tx 7.9 to 8.4 GHz . . . . . . . . . . . . . . .Rx 7.25 to 7.75 GHzKu:. . . . . . . . . . . .Tx 13.75 to 14.5 GHz . . . . . . . . . . . (option from 12.75 GHz) . . . . . . . . . . . . .Rx 10.70 to 12.75 GHzDBS: . . . . . . . . . . .Tx 17.3 to 18.1 GHz . . . . . . . . . . . . . . (option to 18.4 GHz) . . . . . . . . . . . . .Rx 10.70 to 12.75 GHzKa:. . . . . . . . . . . . .Tx 27.5 to 30.0 GHz . . . . . . . . . .(option 30.0 to 31.0 GHz) . . . . . . . . . . . . . . .Rx 18.2 to 21.2 GHz

Tx GainX: . . . . . . Tx 38.4 dBi typ @ 8.15 GHzKu:. . . . . Tx 43.3 dBi typ @ 14.25 GHzDBS: . . . Tx 45.2 dBi typ @ 17.85 GHzKa:. . . . . Tx 49.4 dBi typ @ 28.75 GHz

G/TX; . . . . . . . . . . . . 7.40 GHz = 15.3 dBk (assumes LNA 50 dB Gain 0.8 dB NF)Ku:. . . . . . . . . . . 11.20 GHz = 19.4 dBk . (assumes LNB 60 dB gain 0.7 dB NF)DBS: . . . . . . . . . 11.20 GHz = 19.4 dBk .(assumes LNB 60 dB Gain 0.7 dB NF)Ka:. . . . . . . . . . . 19.70 GHz = 22.0 dBk .(assumes LNB 55 dB Gain 1.6 dB NF)

Cross Polarisation IsolationX Band Circular . . . . . . . . . . 30 dB Tx (axial ratio 1.07) . . . . . . . . . . 20 dB Rx (axial ratio 1.22)Ku and DBS Band Linear . . . . . . . . . . . . . . . . . . . . . . . . . . -35 dBKa Band . . . . . . . . . . . . . . . . . . . Consult factory . . (all relative to co-polar gain within 1 dB contour)

Port to Port IsolationX: . . .Tx / Rx 20 dB (100 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 20 dBKu:. . .Tx / Rx 40 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 30 dBDBS: .Tx / Rx 40 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 30 dB

Ka:. . .Tx / Rx 35 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 35 dB

AFD150 FLYDRIVE

FrequencyC: . . . . . . . . . . . . .Tx 5.85 to 6.65 GHz . . . . . . . . . . . . . . . . .Rx 3.4 to 4.2 GHzor . . . . . . . . . . .Tx 6.725 to 7.025 GHz . . . . . . . . . . . . . . . . .Rx 4.5 to 4.8 GHzX: . . . . . . . . . . . . . . .Tx 7.9 to 8.4 GHz . . . . . . . . . . . . . . .Rx 7.25 to 7.75 GHzKu:. . . . . . . . . . . .Tx 13.75 to 14.5 GHz . . . . . . . . . . . (option from 12.75 GHz) . . . . . . . . . . . . .Rx 10.70 to 12.75 GHzDBS: . . . . . . . . . . .Tx 17.3 to 18.1 GHz . . . . . . . . . . . . . . (option to 18.4 GHz) . . . . . . . . . . . . .Rx 10.70 to 12.75 GHzKa:. . . . . . . . . . . . .Tx 27.5 to 30.0 GHz . . . . . . . . . .(option 30.0 to 31.0 GHz) . . . . . . . . . . . . . . .Rx 18.2 to 21.2 GHz

Tx GainC; . . . . . . Tx 38.0 dBi typ @ 6.25 GHzX: . . . . . . Tx 40.3 dBi typ @ 8.15 GHzKu:. . . . . Tx 45.2 dBi typ @ 14.25 GHzDBS: . . . Tx 47.2 dBi typ @ 17.85 GHzKa:. . . . . Tx 51.3 dBi typ @ 28.75 GHz

G/TC: . . . . . . . . . . . . 3.95 GHz = 13.5 dBk . (assumes LNA 50 dB gain 0.5 dB NF)X; . . . . . . . . . . . . 7.40 GHz = 17.3 dBk (assumes LNA 50 dB Gain 0.8 dB NF)Ku:. . . . . . . . . . . 11.20 GHz = 21.4 dBk . (assumes LNB 60 dB gain 0.7 dB NF)DBS: . . . . . . . . . 11.20 GHz = 21.4 dBk .(assumes LNB 60 dB Gain 0.7 dB NF)Ka:. . . . . . . . . . . 19.70 GHz = 24.0 dBk .(assumes LNB 55 dB Gain 1.6 dB NF)

Cross Polarisation IsolationC Band Linear . . . . . . . .-30 dB Tx / RxC and X Band Circular . . . . . . . . . . 30 dB Tx (axial ratio 1.07) . . . . . . . . . . 20 dB Rx (axial ratio 1.22)Ku and DBS Band Linear . . . . . . . . . . . . . . . . . . . . . . . . . . -35 dBKa Band . . . . . . . . . . . . . . . . . . . Consult factory . . (all relative to co-polar gain within 1 dB contour)

Port to Port IsolationC: . . .Tx / Rx 40 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 30 dBX: . . .Tx / Rx 20 dB (100 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 20 dBKu:. . .Tx / Rx 40 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 30 dBDBS: .Tx / Rx 40 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 30 dBKa:. . .Tx / Rx 35 dB (110 dB incl filter) . . . . . . . . . . . . . . . . . . . . Rx / Tx 35 dB

WEIGHTS / DIMENSIONS / WIND SPEED

Dimensions / WeightsFlyDrive 120Case 1: . . . . . . . 944 x 540 x 358 mm 31.5 Kg . . . . . . (37 x 21.2 x 14 inches 69.4lbs)Case 2: . . . . . . . 990 x 580 x 400 mm 31.5 Kg . . . . (39 x 22.8 x 15.7 inches 69.4lbs)

FlyDrive 150Case 1: . . . . . . . 944 x 540 x 358 mm 31.5 Kg . . . . . . (37 x 21.2 x 14 inches 69.4lbs)Case 2: . . . . . . . . 990 x 580 x 400 mm 26 Kg . . . . (39 x 22.8 x 15.7 inches 57.3lbs)Case 3: . . . . . . . .990 x 580 x 250 mm 29.5 Kg . . . . . . . (39 x 22.8 x 9.8 inches 65lbs)Non-IATA 2-Case Configuration is available

WindspeedsOperational . . . . . . . . 20 m/s (45 mph)Degraded roofrack. . . 25 m/s (56 mph)Degraded flyaway . . . . 30 m/s (67 mph)Survivial . . . . . . . . . . 50 m/s (112 mph)

PRODUCT DATASHEET


OVERVIEWThe NewSwift CF antenna is a highly compact integrated satellite terminal designed for rapid deployment.

The NewSwift CF design allows for two HPAs, variable power combiner, redundancy switching and two upconverters to be integrated into the antenna assembly close to the feed, thereby minimising the waveguide loss and maximising the available EIRP.

The fully weatherproof RF equipment is further protected from the weather by a removable cover thus ensuring reliable operation whatever the environmental conditions.

FEATURES• 1.2m, 1.5m or 1.8m reflector

• Bands available:

• 1.2m - X, Ku, DBS & Ka

• 1.5m - C, X, Ku, DBS & Ka

• 1.8m - C, X, Ku, DBS & Ka

• Full 3 axis control includes 360° azimuth range

• Elevation Adjustment - 6° to 91°

• GPS based auto satellite acquisition packages available

• 800 City database controller

• Tracking option with beacon receiver

• Full remote control

• Many models are Eutelsat and/or Intelsat type approved

• All models are approved for use with the majority of Satellite Providers

• Type - offset fed

• Configuration - prime focus

• Mount - elevation over azimuth

• Software upgradeable to auto-acquire (ACU5216) and integral ASI Demod

• Option for multi-band capability by cartridge exchange

• Available in any custom colour scheme

QUALIFIED REQUIREMENTS• ITU-R S.580-6

• ITU-R S.465-5

• INTELSAT IESS-601

• EUTELSAT EESS-502

• MIL STD 188-164A

• STANAG 4484 (as applicable)

High Performance Compact Integrated Solution

Two HPAs located within the antenna assembly

ANTENNA CONTROL UNIT

• Compact half width rack unit

• Serial remote interface

• ‘One touch’’ stow & deploy

• Fast / med / slow motor drive system

• Simultaneous positional feedback of Az / El / Pol axis with true elevation reading from calibrated inclinometer

ANTENNA POSITION CONTROL

• Linear Polarisation: Full 3 axis motor control with manual override mechanism

• Circular Polarisation: Full 2 axis motor control with manual override mechanism

• Polarisation Adjustment

• Linear: +/- 90

• Circular: None°

NewSwift CFMotorised Antenna

OPTIONS• GPS based auto-acquire upgrade package

• Rotary joint for azimuth axis

• Co-polar receive facility for Ku Band

© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

SPECIFICATIONS


1.2M NEWSWIFTFREQUENCY

X:• Tx 7.9 to 8.4 GHz• Rx 7.25 to 7.75 GHz

Ku:• Tx 13.75 to 14.5 GHz (option from 12.75 GHz)

• Rx 10.70 to 12.75 GHz

DBS:• Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

• Rx 10.70 to 12.75 GHz

Ka:• Tx 27.5 to 30.0 GHz• Rx 18.2 to 20.2 GHz (option Tx 30

to 31 GHz)• Rx 20.2 to 21.2 GHz)

GAIN

X:• Tx 38.4 dBi typ @ 8.15 GHz• Rx 37.6 dBi typ @ 7.4 GHz

Ku:• Tx 43.3 dBi typ @ 14.25 GHz• Rx 41.2 dBi typ @ 11.2 GHz

DBS:• Tx 45.2 dBi typ @ 17.85 GHz• Rx 41.2 dBi typ @ 11.2 GHz

Ka:• Tx 49.4 dBi typ @ 28.75 GHz• Rx 46.1 dBi typ @ 19.7 GHz

G/T

X:• 7.40 GHz = 15.3 dBk (Assumes LNA

50 dB Gain 0.8 dB NF)

Ku:• 11.20 GHz = 19.4 dBk (Assumes

LNB 60 dB gain 0.7 dB NF)

DBS:• 11.20 GHz = 19.4 dBk (LNB 60 dB

Gain 0.7 dB NF)

Ka:• 19.70 GHz = 22.0 dBk (Assumes

LNB 55 dB Gain 1.6 dB NF)


X Band Circular• 30 dB Tx (axial ratio 1.07)• 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear• –35 dB

Ka Band• Consult factory (All relative to co–

polar gain within 1 dB contour)


X:• Tx / Rx 20 dB (100 dB incl filter)• Rx / Tx 20 dB

Ku:• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB

DBS:• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB

Ka:• Tx / Rx 35 dB (110 dB incl filter)• Rx / Tx 35 dB

WEIGHTS

Antenna• 95Kg (209lbs)

TEMPERATURE

Operational:• –20°C to +60°C (–4°F to 140°F)

Transport:• –40°C to +70°C (–40°F to 158°F)

WINDSPEED

Operational:• 21 m/s (47 mph)• Degraded 28 m/s (63 mph)

Survival:• 50 m/s (112 mph)

HUMIDITY• 0 to 100% RH

1.5M NEWSWIFTFREQUENCY

C:• Tx 5.85 to 6.65 GHz• Rx 3.4 to 4.2 GHz (option Tx 6.725

to 7.025 GHz)



• Rx 10.70 to 12.75 GHz

DBS:• Tx 17.3 to 18.1 GHz• (option to 18.4 GHz)• Rx 10.70 to 12.75 GHz


to 31 GHz, Rx 20.2 to 21.2 GHz)

GAIN

C:• Tx 38 dBi typ @ 6.25 GHz• Rx 34 dBi typ @ 3.95 GHz




Ka:• Tx 51.3 dBi typ @ 28.75 GHz• Rx 48 dBi typ @ 19.7 GHz

G/T

C:• 3.95 GHz = 13.5 dBk (Assumes LNB


X:• 7.40 GHz = 17.3 dBk (Assumes LNB


Ku:• 11.20 GHz = 21.4 dBk (Assumes

LNB 60 dB gain 0.7 dB NF)

DBS:• 11.20 GHz = 21.4 dBk (Assumes


Ka:• 19.70 GHz = 24 dBk (Assumes LNB


06/14RD000977 Rev 1


C Band Linear• –30 dB Tx/Rx



Ka Band• Consult factory (all relative to

co-polar gain within 1 dB contour)


C:• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB





WEIGHTS

Antenna• 105Kg (231lbs)

TEMPERATURE

Operational:• –20°C to +60°C (–4°F to 140°F)


WINDSPEED

Operational: • 21 m/s (47 mph)

Degraded• 28 m/s (63 mph)


Humidity• 0 to 100% RH

1.8M NEWSWIFT

FREQUENCY

C:• Tx 5.85 to 6.65 GHz• Rx 3.4 to 4.2 GHz (option Tx 6.725

to 7.025 GHz)



• Rx 10.70 to 12.75 GHz

DBS:• Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

• Rx 10.70 to 12.75 GHz


to 31 GHz, Rx 20.2 to 21.2 GHz)

GAIN

C:• Tx 39.6 dBi typ @ 6.25 GHz• Rx 35.6 dBi typ @ 3.95 GHz





G/T

C:• 3.95 GHz = 15.0 dBk (Assumes LNB


X:• 7.40 GHz = 18.8 dBk (Assumes LNA


Ku:• 11.20 GHz = 23 dBk (Assumes LNB

60 dB gain 0.7 dB NF)• DBS:11.20 GHz = 23.0 dBk (Assumes


Ka:• 19.70 GHz = 25.6 dBk (Assumes



C Band Linear• –30 dB Tx/Rx



Ka Band• Consult factory (all relative to co-

polar gain within 1 dB contour)


C:• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB





WEIGHTS• Antenna115Kg (253lbs)

TEMPERATURE

Operational:• –20°C to +60°C(–4°F to 140°F)


WINDSPEED

Operational:• 17 m/s (38 mph)




PRODUCT DATASHEET


NewSwift HDMotorised Antenna

OVERVIEWThe NewSwift HD design allows for up to two 400 watt phase combined HPA’s or two 750 watt HPA’s in a redundant configuration. Allows for integration of two 5000 series upconverters and APS5000 (Protection Switch) within the NewSwift HD new aero-dynamic enclosure. The HPA’s are as close as possible to the feed, thereby minimising the waveguide loss and maximising the available EIRP.


The entire aero-dynamic enclosure housing the RF equipment rotates with the azimuth axis eliminating the need for an expensive and lossy waveguide rotary joint.

FEATURES• Available with 1.5m or 1.8m reflector

• Bands available via feed cartridge exchange

– 1.5m - C, X, Ku, DBS & Ka

– 1.8m - C, X, Ku, DBS & Ka


• GPS based auto satellite acquisition package available

• Integral Satellite Database which automatically provides Antenna Pointing Data



• Eutelsat, Intelsat and Arabsat compliant

• All models are approved for use with the majority of Satellite Providers




• Software upgradable to auto-acquire (ACU5216) and integral ASI Demod

• Option for multi-band capability by cartridge exchange

• Available in any custom colour scheme

High performance compact integrated solution


SPECIFICATIONS

www.vislink.com • [email protected]/09

RD001519 Rev 1

GENERALMeets The Requirements of

• ITU-R S.580-6• ITU-R S.465-5• INTELSAT IESS-601• EUTELSAT EESS-502• MIL STD 188-164A• STANAG 4484

(as applicable)

ANTENNA POSITION CONTROL• Linear Polarisation: Full 3 axis

motor control with manual override mechanism

• Circular Polarisation: Full 2 axis motor control with manual override mechanism

Azimuth Adjustment• 360°

Elevation Adjustment• 6° to 91°

Polarisation Adjustment• Linear: +/- 90°• Circular: None

ANTENNA CONTROL UNIT• Compact half width rack unit• Serial remote interface• “One touch’’ stow & deploy• Fast / med / slow motor drive system• Simultaneous positional feedback of

Az / El / Pol axis with true elevation reading from calibrated inclinometer

OPTIONS• GPS based auto-acquire upgrade

package• Rotary joint for azimuth axis• Co-polar receive facility for Ku Band


1.5M NEWSWIFTFREQUENCYC:

• Tx 5.85 to 6.65 GHz• Rx 3.4 to 4.2 GHz

(option Tx 6.725 to 7.025 GHz)• Rx 4.5 to 4.8 GHz)


Ku:• Tx 13.75 to 14.5 GHz

(option from 12.75 GHz)• Rx 10.70 to 12.75 GHz

DBS:• Tx 17.3 to 18.1 GHz

(option to 18.4 GHz)• Rx 10.70 to 12.75 GHz

Ka:• Tx 27.5 to 30.0 GHz• Rx 18.2 to 20.2 GHz

(option Tx 30 to 31 GHz, • Rx 20.2 to 21.2 GHz)

GAINC:

• Tx 38 dBi typ @ 6.25 GHz• Rx 34 dBi typ @ 3.95 GHz



Ka:• Tx 51.3 dBi typ @ 28.75 GHz• Rx 48 dBi typ @ 19.7 GHz

G/TC:

• 3.95 GHz = 13.5 dBk (assumes LNB 60 dB Gain 0.5 dB NF)

X:• 7.40 GHz = 17.3 dBk (assumes LNA 50

dB Gain 0.8 dB NF)Ku:

• 11.20 GHz = 21.4 dBk (assumes LNB 60 dB gain 0.7 dB NF)

DBS:• 11.20 GHz = 21.4 dBk (assumes LNB

60 dB Gain 0.7 dB NF)Ka:


CROSS POLARISATION ISOLATIONC Band Linear:

• -30 dB Tx/RxC and X Band Circular:

• 30 dB Tx (axial ratio 1.07)• 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear• -35 dB

Ka Band• Consult factory (all relative to co-polar

gain within 1 dB contour)

PORT TO PORT ISOLATIONC:

• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB





WINDSPEEDOperational:

• 21 m/s (47 mph)Degraded:

• 28 m/s (63 mph)Survival:

• 50 m/s (112 mph)

STOWED DIMENSIONS• 210cm l x 150cm w x 56cm h

[82.7" x 59" x 22"]


• -20°C to +60°C [-4°F to 140°F]Transport:

• -40°C to +70°C [-40°F to 158°F]

1.8M NEWSWIFTFREQUENCYC:

• Tx 5.85 to 6.65 GHz• Rx 3.4 to 4.2 GHz

(option Tx 6.725 to 7.025 GHz, Rx 4.5 to 4.8 GHz)

• Rx 4.5 to 4.8 GHzX:

• Tx 7.9 to 8.4 GHz• Rx 7.25 to 7.75 GHz


• Rx 10.70 to 12.75 GHzDBS:

• Tx 17.3 to 18.1 GHz (option to 18.4 GHz)

• Rx 10.70 to 12.75 GHzKa:

• Tx 27.5 to 30.0 GHz• Rx 18.2 to 20.2 GHz (option Tx 30.0

to 31.0 GHz, Rx 20.2 to 21.2 GHz)

GAINC:

• Tx 39.6 dBi typ @ 6.25 GHz• Rx 35.6 dBi typ @ 3.95 GHz





G/TC:


X:• 7.40 GHz = 18.8 dBk (assumes LNA 50

dB Gain 0.8 dB NF)Ku:


DBS:• 11.20 GHz = 23.0 dBk (assumes LNB

60 dB Gain 0.7 dB NF)Ka:


CROSS POLARISATION ISOLATIONC Band Linear

• -30 dB Tx / RxC and X Band Circular

• 30 dB Tx (axial ratio 1.07)• 20 dB Rx (axial ratio 1.22)

Ku and DBS Band Linear• -35 dB

Ka Band • Consult factory (all relative to co-polar

gain within 1 dB contour)

PORT TO PORT ISOLATIONC:

• Tx / Rx 40 dB (110 dB incl filter)• Rx / Tx 30 dB





WINDSPEEDOperational:

• 17 m/s (38 mph)Degraded:

• 23 m/s (52 mph)Survival:

• 40 m/s (90 mph)

STOWED DIMENSIONS• 240cm l x 180cm w x 61cm h

[94.5" x 70.9" x 24"]


• -20°C to +60°C [-4°F to 140°F]Transport:

• -40°C to +70°C [-40°F to 158°F]

PRODUCT DATASHEET


NewSwift LT120 Ku Band Motorised Antenna

OVERVIEWThe NewSwift LT antenna is a highly compact integrated satellite terminal with a Carbon Fibre reflector designed for rapid deployment.

The NewSwift LT design allows for two HPAs, redundancy switching and two upconverters to be integrated into the antenna assembly close to the feed, thereby minimising the waveguide loss and maximising the available EIRP.


FEATURES• Available with 1.2 meter Carbon Fibre reflector


• GPS based auto satellite acquisition packages available

• 800 City database controller



• Approved for use with the majority of Satellite Providers




• Software upgradeable to auto-acquire (ACU5216) with integral ASI Demod and for Eutelsat approved Auto-Point capability

• Available in custom colour schemes

High performance, cost effective, compact integrated solution


SPECIFICATIONS

www.vislink.com • [email protected]/14

RD001518 Rev 1

Two HPAs located within the antenna assembly

GENERAL

Meets The Requirements of• ITU-R S.580-6• ITU-R S.465-5• INTELSAT IESS-601• EUTELSAT EESS-502• MIL STD 188-164A• STANAG 4484

(as applicable)

ANTENNA POSITION CONTROLLinear Polarisation: Full 3 axis motor control with manual override mechanism

Azimuth Adjustment• 360°

Elevation Adjustment• 6° to 91°

Polarisation Adjustment• +/– 90°

ANTENNA CONTROL UNIT• Compact half width rack unit• Serial remote interface• “One touch’’ stow & deploy• Fast / med / slow motor drive

system• Simultaneous positional feedback of

Az / El / Pol axis with true elevation reading from calibrated inclinometer OPTIONS

• GPS based auto-acquire upgrade package

• Rotary joint for azimuth axis• Numerous install kits for 3rd party

BUCs / HPAs• Simultaneous H / V reception

(3-Port)

FREQUENCY(Reflector diameter 120cm)

Ku:• Tx: 13.75 to 14.5 GHz

(option from 12.75 GHz)• Rx: 10.70 to 12.75 GHz

GAIN

Ku: • Tx: 43.3 dBi typ @ 14.25 GHz• Rx: 41.2 dBi typ @ 11.2 GHz

G/T

Ku:• 11.20 GHz = 19.4 dBk

(assumes LNB 60dB gain 0.7dB NF)


Boresight.>35 dB

Within 1dB contour>32 dB

PORT TO PORT ISOLATIONKu:

• Tx/Rx 40dB (110 dB incl filter)• Rx / Tx 30 dB

WEIGHTS

Antenna98 Kg (215 lbs)

TEMPERATURE

Operational:• –20°C to +60°C

(–4°F to 140°F)

Transport:• –40°C to +70°C

(-40°F to 158°F)

WINDSPEED

Operational:• 21 m/s (47 mph)





■ Newsgathering ■ Event Coverage ■ Sports Coverage ■ Secure SATCOM

Key Features

■ Less than 5 minutes to deploy ■ Interchangeable C, X, Ka, and Ku Band feed cartridge

■ Full 3 axis simultaneous motorisation ■ Eutelsat, Intelsat and Arabsat compliant ■ GPS based auto satellite acquisition option

High Performance Compact Integrated Solution

NewSwift HD 2.4m Motorised AntennaThe Advent NewSwfit HD 2.4m antenna is the latest addition to the present NewSwift range. The light weight roof mounted drive away antenna is designed to meet the highest standards of reliability and functionality for today’s broadcast and military market. The carbon fibre reflector is available as a three piece reflector with the ability to be mounted on a wide range of SNG and military mobile hub vehicles. All three motorised axis work simultaneously to allow rapid on air time of less than five minutes.

Power amplifiers and electronics are protected in the removable weatherproof housing mounted close to the feed to minimise waveguide loss.

BENEFITS

■ Reflector available in a 3 piece motorised configuration

■ Tracking option with beacon receiver

■ Designed to work with the ACU5000 series antenna controller

■ Available in any colour scheme

SPECIFICATIONS


change specifications without notice. Please contact your representative to confirm current specifications.


14/10/15 ENGRD000920 Rev 2

C-BAND

FREQUENCY ■ Tx Frequency Band (CP) 5.85-6.425 GHz

■ Rx Frequency Band (CP) 3.625-4.2 GHz

■ Tx Frequency Band (LP) 5.85-6.65 GHz

■ Rx Frequency Band (LP) 3.4-4.2 GHz

GAIN ■ TX Gain 42.1 dBi

G/T ■ 3.8GHz 16.3 dB/K

POLARISATION ■ Polarisation Tx – RHCP or LHCP configurable

■ Rx – Orthogonal to Tx ■ Linear (Option) ■ Axial Ratio (CP) <1.3dB (Tx) ■ Cross Polar isolation <27 dB

STANDARDS ■ MIL-STD-188-164A ■ EUTELSAT EESS-02 ■ ITU-R S.465.5 and S.580-6 ■ FCC 25.209

X-BAND

FREQUENCY ■ Tx Frequency Band 7.9-8.4 GHz ■ Rx Frequency Band 7.25-7.75 GHz


G/T ■ 7.5GHz 22.5 dB/K


■ Rx – Orthogonal to Tx ■ Axial Ratio <2dB (Tx), <1.21dB (Rx)

STANDARDS ■ MIL-STD-188-164A ■

KA-BAND

FREQUENCY ■ Tx Frequency Band 29.5-31 GHz (Option 27– 29.5GHz)

■ Rx Frequency Band 20.2-21.2 GHz (Option 18.2GHz – 20.2GHz)


G/T ■ 20.7GHz 28.8 dB/K


■ Rx – Orthogonal to Tx ■ Linear (Option) ■ Axial Ratio <1.0dB (Tx), 1.5dB (Rx)dB

STANDARDS ■ MIL-STD-188-164A ■ EUTELSAT EESS-02 ■ ITU-R S.465.5 and S.580-6 ■ FCC 25.209

COMMON

POWER REQUIREMENT ■ 90 - 264V AC (supplied with external half rack width PSU)

ENVIRONMENTAL ■ Operating Temperature: -30°C to +60°C

■ Transport Temperature: -40°C to +70°C

■ Humidity: 0 - 100% ■ Operating Wind Speed: 75Kmph

■ Degraded Wind Speed: 100Kmph

■ Deployed Survival Wind Speed 115Kmph

■ Stowed Survival Wind Speed 180Kmph

PHYSICAL ■ Elevation Adjustment: 6° to 95° ■ Azimuth Adjustment: +/- 180° ■ Polarisation Adjustment: linear +/- 90°, circular none

■ Platform Mount: Elevation over Azimuth

■ Configuration: Prime Focus ■ Feed Type: Offset ■ Stowed Dimension: Length: 3150mm Width: 1675mm Height: 660mm

■ Weight: 220kg ■ ITAR Status: ITAR Free

KU-BAND

FREQUENCY ■ Tx Frequency Band 13.75 – 14.5 GHz

■ Rx Frequency Bands (GHz) 10.7-12.75


G/T ■ 11.7GHz 26.0 dB/K

POLARISATION ■ Polarisation Linear H/V Tx orthogonal to Rx

■ Cross polar isolation 35dB

STANDARDS ■ ITU-R S.465-5 and S.580-6 ■ FCC 25.209 with 25.212 ■ INTELSAT IESS-601 ■ EUTELSAT EESS-502, ETSI EN 301.358

Key Features AUC5800

■ The AUC5800 is a high performance ■ block upconverter with the input at L ■ Band and output versions for C, X, Ku, ■ DBS and Ka Bands ■ Internal / External reference ■ High / Low gain options ■ High stability ■ Optional second SHF output for redundancy ■ HPA control data pass-through ■ 19” 1U HD SHF solution available with ■ DVE5000 series and ADM5000 ■ Weather resistant for outdoor use

Key Features APS5000

■ Provides hot-standby switching of a pair ■ of SHF output signals from AUC5800, or ■ other Block Upconverters ■ Integral Phase Shifter for ■ Phase-Combined applications ■ Forward power monitor ■ Status inputs from BUCs and HPAs ■ M&C link to ASC5000

AUC5000 & APS5000Block Upconverter & Protection SwitchVislink's established lightweight, compact, 1U half rack electronics packages are ideally suited for flyaway or vehicle mounted solutions, where weight and space are at a premium. The 5000 series of electronics can be packaged in different lightweight, ruggedised canvas flight cases, depending on units selected and system configuration.

The APS5000 is a compact ½ rack width 1RU SHF Protection Switch covering C through to DBS TX Bands. The APS5000 is typically, but not exclusively, used with a pair of AUC58xx Advent BUCs to provide 1:1 protection. This is normally under control from a ASC5000 System Controller although the APS can function "stand-alone".

VISLIN

K N

ews and Entertainm

ent

FeaturesThe ACU5000 is an antenna control unit •designed to operate with VISLINK’s range of motorised antenna systemsThe unit provides user friendly 3 speed •motor control of azimuth, elevation and polarisation axis as well as automatic stow and deploy functionsThe ACU5000 comes with the option of •interfacing with a GPS receiver and/or fluxgate compassIntegrated beacon receiver option provides •facilities for automatic satellite acquisition and trackingThe ACU provides an 800 city updateable •database to enable satellite pointing without the need for GPSOptional DVB-S/S2 demodulation •capability to provide ASI outputSatellite identification capability• External reference signal for LNB•

ACU5000Antenna Control Unit

5000 Series OverviewAdvent’s established lightweight, compact, 1U half rack electronics packages are ideally suited for flyaway or vehicle mounted solutions, where weight and space are at a premium. The 5000 series of electronics can be packaged in different lightweight, ruggedised canvas flight cases, depending on units selected and system configuration.

Compact 1/2 width 19” x 1U rack mountable units•1/4 of the size and 1/6th of the weight of competitors equivalent products•DesignedforcontributionflyawayandDSNGvehicleapplicationswherespace•and weight are criticalFull range of units available;•

SD and HD Digital Video Exciter ƌIP Modem ƌMultiplexer Router ƌBUCS ƌAntenna and Drive Control units ƌSystem IRD / Redundancy controllers ƌProtection Switches ƌL Band over fibre modems ƌ

Allunitsfieldupgradeable•Allunitshaveintegralwebbrowserfacility(whereapplicable)forRC&M•applicationsAcomprehensiverangeof flightcasesolutionsfor1/2rackand19”rackunits•tosuitsystemconfiguration,i.e.3U,4U,5UAllunitscanalsobefixedtogetherandmountedinastandard19”flightcaseor•rack within a vehicle

Compact, lightweight 1/2 width rack units

SPECIFICATIONS




FREQUENCY REFERENCE

Internal Frequency Accuracy ■ +/- 100 Hz from nominal at 25C ■ (+/- 80 Hz typically)

Internal Frequency Stability ■ 2 x 10-8 Rack

External Reference (Internal link selectable)

■ User supplied via L Band cable ■ 10 MHz @ 0 dBm +/- 3 dB

AUC5000FREQUENCY RANGE

■ Input Frequency Range ■ 950 to 1750 MHz

Output Frequency Range ■ C Band AUC5806 ■ 5.85 to 6.65 GHz ■ 5.925 to 7.129 GHz

X Band AUC5808 ■ 7.9 to 8.4 GHz

Ku Band AUC5813 / 14 ■ 12.75 to 13.25 GHz ■ 13.75 to 14.5 GHz ■ 14.0 to 14.5 GHz

DBS Band AUC5817 / 18 ■ 17.3 to 18.1 GHz ■ 17.6 to 18.4 GHz

Ka Band AUC5827 / 28 / 29 / 30 ■ 27.5 to 31.0 ■ (Specify 700 MHz Max Tx sub-band)

Others ■ Any 800 MHz to order ■ SHF 50 Ω N female (Ka band 2.9mm connector)

■ L Band 50 Ω N female

HPA Control / Status / DC Input ■ Weatherproof multi-pin

GAIN

Input Power Level ■ -10 dBm nominal, 0 dBm max

Output Power Level ■ -5 dBm min at 1 dB compression point (+10 dBm

■ to +35 dB with high gain option)

Gain ■ -5 dBm to +20 dB nominal internally adjustable

■ (+10 dBm to +35 dB high gain option)

Gain Variation ■ +/- 0.25 dB any 36 MHz

■ +/- 1.5 dB over 800 MHz ■ +/- 0.25 dB over 24 hours @ constant temperature

Group Delay Variation ■ +/- 0.25 ns in any 4 MHz

SSB Phase Noise ■ Better than 6 dB below IESS308

VSWR ■ Input Return Loss ■ 12 dB @ 50 Ω

Output Return Loss ■ 18 dB @ 50 Ω

SPURIOUS

Modulated ■ -60 dBc

Unmodulated ■ -65 dBm

Harmonics ■ -20 dBc

HPA CONTROLLER ■ Pass-through and protocol transfer of HPA control data from L Band input to RS485 HPA control output - Xicom, CPI, e2V, Paradise supported, others to order

ENVIRONMENTAL & PHYSICAL

Temperature

Operational: ■ -20°C to +60°C(4°F to 140°F)

Storage: ■ -20°C to +80°C(-4°F to 176°F)

Size ■ 210mm wide x 350mm deep ■ (8.27 inches wide x 13.78 inches deep)

■ 1U half rack width

Weight ■ 2 Kg (4.4lbs)

Power ■ Phantom from L Band or 18V DC / 1A

Connectors ■ SHF 50 Ω N female (Ka band 2.9mm connector)

■ L Band 50 Ω N female

HPA Control / Status / DC Input ■ Weatherproof multi-pin

APS5000SWITCH DRIVES

■ Internal coaxial switch ■ Two switch drives for external switches

REMOTE CONTROL ■ RS485 9600 baud

RF ■ Input / output frequency range: 4-18GHz

■ Input loss . . . 4 dB + 0.3 dB nominal

■ Input level . . . +30 dBm max ■ Input/output return loss . . . 16

dB at 50 Ω

CONNECTIONS

RF Inputs ■ Female N-type 50 Ω

■ RS485 comms ■ Switch drives

■ Status inputs

POWER ■ 18Vdc from AUC5800 or via external 12-18 Vdc

SUPPLY


Operational Temperature: ■ 0°C to +50°C (32°F to 122°F)

Storage Temperature ■ 20°C to +70°C (–4°F to 158°F)

Size ■ 210mm wide x 350mm deep ■ (8.27 inches wide x 13.78 inches deep)


Weight ■ 1.2 Kg (2.6lbs)

Frequency ■ 47 to 63 Hz @ <50W

Operating Voltage ■ 100 - 240 Vac +/- 10%

www.vislink.com

© 2009 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 4/1/2010

Specifications

Half rack flight case, housing three 5000 series units. Flight cases are available

in a variety of options to suit the application

The ACU5000 series antenna control units are designed to operate with the complete range of Advent motorised antenna systems, using the 3000, 4000 and 5000 series Drive Control Units (DCU).

The ACU5000 provides a user friendly interface enabling the control of azimuth, elevation and polarisation for the deployment and operation of the motorised antenna system.

The ACU has embedded software to be able to calculate the position of a satellite from the current location and orientation of the uplink system. The location and orientation can also be entered manually. If the beacon receiver option is included, the ACU can search, peak and track the satellite beacon signal.

Tracking is maintained using a differential slope track algorithm. From the detailed characteristics of the beam pattern stored within the controller the ACU can optimise the antenna pointing with the minimum of movement during the tracking process.

Satellites containing commercial traffic can be positively identified by their ‘Satellite ID’, in addition to comparison of the beacon frequency. This ensures the correct satellite has been acquired without the need for a spectrum analyser or receiver. An optional ASI output is available to feed an external decoder.

The ACU5000 provides the ability to recall one of up to 100 stored satellite presets and additional software providing up to 800 city information database enabling the controller to find the satellite without the need of GPS.

FRONT PANEL INDICATIONSClear LCD shows information on the current •status of the antenna, beacon receiver and DVB parameters

FRONT PANEL CONTROLSStart

Starts an antenna system activity•

StopStops any current antenna system activity•

RateChanges the current movement rate•

Pol Pol Controls the polarisation axis movement•

, , , Controls the azimuth and elevation axis movement •functions. In the menu mode, used to navigate and select options

MenuSteps through key menu options•

Enter, EscapeUsed to select menu options and escape from •current selections

POSITIONAL DISPLAY ACCURACYAzimuth, elevation and polarisation +/- 0.05•

ANGULAR CONTROL RATES

Fast up to 5• °/s (antenna type dependent)

Medium 0.5• °/s

Slow 0.1• °/s

ANGULAR CONTROL STEPS

All antenna types

Fast 1.0• °

Medium 0.5• °

Slow 0.1• °

RF INPUT950 - 2150 MHz•Beacon level -90 dB min•DVB Input -20 to -65 dBm•LNB power switchable 18v/13v @ 1A•LNB reference 10 MHz•

RF Monitor loop-thro’•

REMOTE CONTROLRJ45 10/100 base-T•RS232/485 4800-115200 baud•Ethernet / Web Interface / SNMP•

WEB BROWSERSupporting Internet Explorer 7 & 8, Firefox, Safari •and Opera

MODEL NOS

ACU5012Antenna control unit with manual motor control•

ACU5214Antenna control unit with auto-point capability. •Includes compass and GPS antenna

ACU5216Antenna control unit with auto-acquire capability. •Utilises internal Beacon Receiver and includes compass and GPS antenna

ACU5xxxDD suffix indicates enabling of the integral •DVB-S/S2 demodulator


TemperatureOperational:. . . . . . . . . . . . . . . . . . 0°C to +50C (32°F to 122°F)Storage: . . . . . . . . . . . . . . . . . . –20°C to +80°C (4°F to 176°F)

Size210mm wide x 350mm deep•(8.27 inches wide x 13.78 inches deep)•

1U half rack width

Weight2 Kg (4.4lbs)•

POWER

Operating Voltage

100 - 240 Vac•

Power Consumption<100 VA•

Key Features

■ Compact lightweight MESH network modem

■ Capable of star, multi star, hybrid or full mesh network

■ BPSK-16APSK (24 MODCODs) for TDMA

■ TDMA mod/demod up to 12Msps/20Mbps


■ Event Coverage ■ Newsgathering ■ Sports Coverage ■ Secure SATCOM

ADM5100Satellite MESH ModemThe ADM5100 SKYWAN 5G is a collaboration between Vislink and ND SatCom. Ideal for use with a range of Vislink SATCOM systems, it is a MF-TDMA modem with unique ONE hardware concept. Each unit can act as a traffic HUB or Master Station or both, therefore adding agility in terms of its network role. No matter if you require a star, multi star, hybrid or full mesh network, the unique hardware design of SKYWAN 5G reliably fits all existing topologies within the VSAT world.

SPECIFICATIONS


change specifications without notice. Please contact your representative to confirm current specifications.03/15 ENG


VSAT NETWORK PARAMETERS

Network Topology ■ Star ■ Multi-Star ■ Hybrid ■ True Fukk Mesh

Type & Number of Demodulators ■ 1x MF-TDMA modulator ■ 1x TDMA demodulator (home channel)

■ 1x DVB-S2 receiver (ETSI)

Access Type TDMA ■ MF-TDMA for all direction communication with fast frequency hopping in Tx and fixed Rx home channel

Encoding for TDMA ■ Turbo

Access Scheme ■ Bandwidth-on-Demand / real-time / non-real-time / guaranteed throughput / QoS classes

Stacking ■ Cascading of multi (max 4) units to one stack (with prime controller) for ad. TDMA demods on each node

FEC Code Rates ■ TDMA

■ BPSK: 1/3, 2/5, 4/9, 1/2 & 2/3

■ QPSK: 1/3, 2/5, 4/9, 1/2, 3/4, 4/5, 5/6 & 6/7

■ 8PSK: 2/3, 3/4, 4/5, 5/6 & 6/7

■ 16APSK: 2/3, 3/4, 4/5, 5/6 & 6/7

Es/No (BER 10-7, incl. margin) ■ TDMA

■ from 0,6dB (QPSK 2/5) – 9,5dB (16APSK 6/7)

■ TDM-DVB-S ■ from 1dB (QPSK 1/2) – 18,2dB (32APSK 9/10)

Channel Spacing/Roll-off ■ TDMA 1.1 , 1.2 , 1.4 / 0.1 , 0.2 , 0.4

Modem Symbolrate – TDMA Tx/Rx

■ 200 KBaud – 12 MBaud, variable in 1 KBaud increments

User Data Rate – TDMA ■ Up to 20 Mbit/s in each direction on LAN port / carrier user data rate starting ~64kbps, slot assigned traffic starting ~4kbps

Modem Symbolrate TDM/DVB-S2 ■ Up to 45 MBaud (in-build receiver)

User Data Rate – TDM/DVB-S2 ■ Up to 160Mbps per DVB channel | Rx: Up to 55-60Mbps IP traffic on LAN port (dep avg packet length)

VSAT Data Throughput ■ Switching packet rate TDMA and LAN switch up to 140.000pps, DVB-S2 receiver up to 12.000pps

INTERFACES

LAN Interface ■ Four 10/100/1000 Base-T Ethernet RJ-45 ports, independent and individual configurable interfaces

Enhanced Features ■ IPv4/v6 / Static Routing / OSPF / BGP/ Load Balancing / TCP / TCP-Acceleration / UDP / IGMP /Robust Header Compression RoHC / Multi VRF support (up to 8 groups) and VLAN / GRE

/ MPLS support/ Traffic Filtering and Shaping for QoS based on configurable PHB rules (up to 14 classes per VRF) / DiffServ / DHCP / NAT/PAT*

Serial RS232/Console ■ SUB DB-9S socket for management access via command line interface

Aux-Port ■ 8 pin connector DIN 45326 – contains Rx lock signal (5

VDC) indicator and Tx inhibit with cable detect support

Display and 5-button switch ■ Notification of status information (reception level, IP-adr. etc.)

USB-A 2.0 ports ■ Front panel port for image updates and configuration loads, rear port for WLAN, UMTS/LTE projects (opt.)

Tx Modulator Port ■ F-connector (75Ohm female) L-Band 950 – 2150 MHz / -3… - 23 dBm ( -43dBm for dynamic range)

Rx Demodulator Port ■ F- connector (75Ohm female) L-Band 950 – 2150 MHz / -30…-70 dBm common used Rx port for DVB-S2 and TDMA receiver

ODU SUPPORT

10 MHz reference signal ■ Configurable by software on Tx and Rx port

LNB ■ Software configurable 0/13/18VDC support, 22kHz signal – internal/external PLL

BUC ■ Software enabled internal 24VDC support, up to 85W on IDU F-connector (typical 6-8W K u)

Others ■ Radios with L-Band interface – Ka, Ku, Ext Ku, C

NETWORK MANAGEMENT

NMS Platform ■ SKYWAN 5G NMS – virtual appliance (virtual host not provided)

NMS Architecture ■ Web based application, central NMS sever, can be placed everywhere (only IP connectivity needed) mainly for planning & configuration,

network runs without NMS always on or connected

IDU Management Interfaces ■ Remote access with in-band management (from central NMS station over satellite),

■ additional SNMP access for monitoring,

■ Local access via WEB-GUI and CLI or integrated console port (RS232)

ENVIROMENTAL, PHYSICAL & POWER

Temperature ■ Operational:

■ 0°C to +50C (32°F to 122°F)

■ Storage: ■ –20°C to +80°C (4°F to 176°F)

Size ■ 210mm wide x 350mm deep (8.27 inches wide x 13.78 inches deep)


Weight ■ 2 Kg (4.4lbs)

Power ■ Operating Voltage

■ 100 - 240 Vac ■ Power Consumption

■ <100 VA

NewStreamMulti-mode Van/OB Transmit System

THE NEWSTREAM ADVANTAGE: Cost effective, space saving and user-friendly multi-purpose Van/OB microwave transmission system.

■ Compact: Space-efficient 2RU x 19" EIA all-inclusive rack mount design for ENG, CNG and SNG control.

■ Operator-friendly: Ergonomic programmable multi-function OLED push button switches minimize front panel controller congestion.

■ Backwards Compatibility: Use existing ENG Nycoil Assemblies configured for Type ‘N,’ Triax connections.

■ Expandable: Purchase a NewStream system initially configured for ENG operation and then add CNG and/or SNG functionality at a later time.

■ Space Efficient ENG ODU: 2, 4, 7, 13, 2/7 GHz mast-mounted single enclosure with built-in RF coaxial relay for omni-directional antenna selection.

■ Broadband Cellular ODU: Lightweight mast or roof-mounted cellular ODU equipped with multiple bonded cellular modems and integral high-gain broadband cellular antennas.

■ HD/SD Broadcast Video Quality: User selectable MPEG-2 or H.264 (AVC) encoding available in 4:2:0 and 4:2:2 profiles.

■ CNG Encoding: H.264 AVC high-profile @ level 4.1 adaptive bit-rate coding (ABR) encoding.

■ SNG: DVB-S and DVB-S2 modulation with optional 10 MHz.

■ Video Inputs: Composite video & HD/SD-SDI.

■ Audio: Two embedded SDI MPEG-2 layer II and two Analog stereo pairs.

■ Future-proof: NewStream is based upon a software defined platform employing high capacity dual-core ARM® Cortex-A9™ FPGAs (field-programmable gate arrays) which allow for the future implementation of emerging communication technologies.

NewStream raises the bar as the most comprehensive mobile broadcast microwave transmission system available today. It combines both licensed and unlicensed RF technologies together, all within an operator-friendly platform.

The NewStream IDU (Indoor Unit) offers a unique type of multi-mode operation which can include ENG (Electronic News Gathering), SNG (Satellite News Gathering) and CNG (Cellular News Gathering) in a space efficient 2-RU (3 ½") by 19" EIA rack-mount chassis. The system includes both MPEG-2 and H.264 AVC (MPEG-4) HD/SD video/audio encoding for ENG and SNG applications and for CNG operations, H.264 ABR (adaptive bit rate) coding to compensate for the dynamic signal fluctuations commonly associated in cellular network infrastructures.

NewStream’s IDU employs advanced programmable OLED (organic light-emitting diode) push button switches which automatically configure themselves based upon the user’s desired mode of operation. The use of OLED smart switches significantly reduces front panel congestion by repurposing otherwise dedicated switches for different operating modes. In addition, they can also provide a color or graphic change-of-status indication in the same switch.

For ENG applications, NewStream includes an all-inclusive mast-mounted ODU (Outdoor Unit) providing 2 GHz or 2 & 7 GHz ultra-linear high RF power output digital amplifiers. It interconnects with the IDU via coaxial or triaxial cable and contains an ancillary RF coax relay to switch between a high-gain directional or optional Omni-directional antenna.

For CNG operations the IDU communicates with a separate cellular ODU that is either roof-top or mast-mounted by means of a MoCa Power over Ethernet (PoE) bridge connection utilizing any standard RG-58 or RG-59 coaxial cable, typically found in most legacy Nycoil assemblies. Mast-mounting the cellular ODU potentially increases broadband cellular connectivity that could be weakened in more congested roof-top mounted installations. Multiple cellular modems inside the ODU are “bonded” together for the seamless transmission of high quality HD (high-definition) video over 3G/4G LTE network service providers such as Verizon, AT&T and T-Mobile.

For SNG applications the NewStream IDU provides control of a fully featured integrated satellite upconverter with L-band output, DVB-S and DVB-S2 modulation.

Key Features

■ Operator-friendly OLED switches ■ Backwards Compatibility ■ Industry-First Cellular ODU ■ Future-Proof ■ Space Efficient 2 rack Unit


■ Electronic Newsgathering ■ Satellite Newsgathering ■ Cellular Newsgathering

SPECIFICATIONS




10/14 ENGRD001096 Rev 7

ENG CELLULAR SNG

OUTDOOR UNIT (ODU)-RF Mast-mounted (single enclosure) Mast-mounted (single enclosure)Optional: Roof-mounted NewSwift, Mantis

2-2.5 GHz 8 Watts (typ.) +/- 1dB @ QPSK, 64 QAM

N/A N/A

4.5-5.0, 6.4-7.1, 6.9-7.5 GHz5 Watts (typ.) +/- 1dB @ QPSK, 64 QAM

N/A N/A

12.7-13.25 GHz 1.5 Watts (typ.) +/- 0.5 dB @ QPSK N/A N/A

CDMA, UMTS, HSPA+, LTE N/A 6-modems, Bonded N/A

IDU to ODU interconnection RG-6/U minimum or better RG-58/U or RG-59/U LMR-400 or equivalent

Size and Weight, ODU 7" w x 10" l x 6" h 16 lbs. (max. @ 2/7 GHz)

10" w x 14" l x 5" h 10 lbs.

TBD

Temperature -20º to +50ºC -20º to +50º C TBD

INDOOR UNIT (IDU) Rack-mount chassis, single

Operator Controls(5) Programmable OLED (organic light-emitting diode) push-button switches, (2) rocker-style switches, (3) LED push-button switches, (1) On/Off push-button switch

Displays (1) Capacitive color touch TFT 5.0" diagonal 800 x 480 white LED backlight display, (2) 16 x 2 segment mono-chromatic blue OLEDs

Presets Up to 99 User configurable3 Operating Modes-Interview, Standard, Mobility

Up to 99 User configurable

Rear panel I/O

BNC - (ASI In, ASI Out, SDI In, CV in, 75 Ω audio, spare)Weidmuller - (analog audio 1L/1R, 2L/2R, digital audio D1, D2, MW ODU power, Ant.)Type ‘N’ or Triax (ODU 2/7 GHz or 2 GHz and 7 GHz legacy MTX ODUs)Type ‘N’ - (L-band Mod. & L-band Mon.); TNC - (to cellular ODU)Miscellaneous- (1) SMA Wi-Fi, (3) RJ45 Ethernet, (1) 115 VAC IEC C14, (1) DB-9 data, (1) USB

Size and Weight, IDU 17.0" W x 16.2" L x 3.5" H (2RUx 19" EIA standard rack-mount), 16 lbs/.45 kg

Prime operating power 115/230 VAC, 2.0 A (typ)

Temperature -10º to +40º C

MODULATION COFDM (DVB-T) OFDMA, CDMA DVB-S QPSK, DVB-S2 QPSK

Optional Modulations LMS-T 10/20 N/A DVB-S2 8PSK, 16/32 APSK

VIDEO INPUT FORMATS HD/SD-SDI HD/SD-SDI HD/SD-SDI

VIDEO RESOLUTIONS HD & SD HD & SD HD & SD

High Definition 1080i, 1080p, 720p 1080i, 1080p, 720p 1080i, 1080p, 720p

Standard Definition 720 x 480i (NTSC), 720 x 576i (PAL) 720 x 480i (NTSC), 720 x 576i (PAL)720 x 480i (NTSC), 720 x 576i (PAL)

VIDEO ENCODING PROFILE MPEG-2, H.264 HD/SD, 4:2:2/4:2:0H.264 AVC HD/SD 4:2:0 High Profile @ Level 4.1

MPEG-2, H.264 HD/SD, 4:2:2/4:2:0

HD Encoding Rate @ 4:2:2 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps

HD Encoding Rate @ 4:2:0 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps

SD Encoding Rate @ 4:2:2 (MPEG-2) 2.0 to 50 Mbps N/A 2.0 to 50 Mbps

SD Encoding Rate @ 4:2:0 (MPEG-2) 1.5 to 15 Mbps N/A 1.5 to 15 Mbps

HD Encoding Rate @ 4:2:2 (H.264) 1.5 to 20 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps

HD Encoding Rate @ 4:2:0 (H.264) 1.5 to 20 Mbps 128 Kbps to 10 Mbps 1.5 to 20 Mbps

SD Encoding Rate @ 4:2:2 (H.264) 1.5 to 15 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps

SD Encoding Rate @ 4:2:0 (H.264) 1.5 to 15 Mbps 128 Kbps to 10 Mbps 1.5 to 15 Mbps

AUDIO ENCODING2- analog stereo/4-mono, AES/EBU (up to 4 pairs embedded in SDI)

1-analog stereo/2-mono, AES/EBU (AAC) (up to 2 pairs embedded in SDI)

2-analog stereo/4-mono, AES/EBU (up to 2 pairs embedded in SDI)

Audio Input (Analog) +8 dBm (avg.) @ 600 Ω bal. +8 dBm (avg.) @ 600 Ω bal. +8 dBm (avg.) @ 600 Ω bal.

THD @ 1 KHz TT <.1% to +18 dBm max. .3% to +18 dBm max. <.1% to +18 dBm max.

S/N (Signal to Noise) >66 db RMS >65 db RMS >66 db RMS

Frequency Response .03-18 KHz ± 1.0 dB .03-12 KHz ± 1.0 dB .03-18 KHz ± 1.0 dB

AES Input (digital) 1.0 V P/P @ 75 Ω unbalanced N/A 1.0 V P/P @ 75 Ω unbalanced

FEATURES

■ 2 x L-band input with L-band loop-through monitor

■ 1 x VHF/UHF* and 1 x ASI inputs

■ ASI decapsulation from IP input*

■ ASI encapsulation onto IP output*

■ LNB/Downconverter powering

■ L3025 Downconverter powering via VHF/UHF input

■ DVB-S QPSK demodulation

■ DVB-S2 QPSK, 8PSK, 16APSK & 32APSK demodulation*

■ ASI Output

■ BISS 1/E Descrambling,

■ MPEG-2 4:2:0 & 4:2:2 SD generic and ultra low delay decoding (with Vislink Encoder)

■ MPEG-2 4:2:0 & 4:2:2 HD generic and ultra low delay decoding* (with Vislink Encoder)

■ H.264 4:2:0 Main Profile and High-profile SD and HD Decoding*

■ H.264 4:2:2 8,9 & 10-bit High-profile SD & HD decoding*

■ Web browser and SNMP control,

■ SDI-HD/SD and CVBS outputs with embedding of up to 4 pairs of decoded audios

■ Independent output of Audio Pairs #1 and #2 as analog audio or balanced AES on LEMO connector (XLR breakout lead supplied)

■ Field upgradeable via USB

■ Typical uses include:

• Lightweight Monitoring IRD for SNG applications

• Satcom Contribution or Cable-Head Receiver

• ENG Point-to-Point DVB-S2 Receiver using L3025 Downconverter

(*) optional license key upgrade

The IRD5200 is the highest performing feature-rich SD/HD Contribution IRD available for lightweight SNG Flyaway or Terrestrial ENG receive applications. Utilising Vislink’s core technologies the IRD5200 combines leading edge high order DVB-S2 demodulation with highly configurable FPGA circuitry providing an abundance of user selectable features all in one streamlined 19” x 1RU Half-Rack Width unit. This revolutionary concept for SNG /ENG and OB receive operations reduces the complexities and operating costs of today’s economically challenged businesses.

The 5200 IRD accepts up to two L band and one 58-860MHz RF input, in addition to two individual ASI inputs, RF signal inputs, providing reliable and comprehensive coverage for any SNG or ENG/OB receiving site. The integral demodulator can be configured for DVB-S QPSK and DVB-S2 schemes from QPSK through to 32APSK

In addition, with the relevant software license, the IRD5200 will accept ASI over IP input (decapsulating an ASI video from an IP transport stream and can encapsulate up to two ASI videos into an IP stream for routing to an alternate destination for decoding.

With the relevant license the integral decoder will decode MPEG2 SD/HD 4:2:0 and 4:2:2 video (including Vislink’s ultra low delay encoding) in addition to H.264 4:2:0 SD/HD and 4:2:2 10bit HD video.

A powerful, yet simple to operate, web-based graphical user interface (GUI) provides complete remote control and monitoring for the receiver by means of an integrated Ethernet/SNMP (RJ45) interface. This can be operated by connecting the IRD to a laptop or other device where the control screen will function in most web browsers. This further reduces capital equipment expenditures by eliminating the need for expensive third party remote control systems.

The IRD5200 is part of a complete suite of units aimed at high quality or versatile contribution links where live video or content is required to be routed back to base via Satellite, Microwave or IP connectivity. The range includes HD and SD Video Encoders, DVB-S, DVB-S2, DVB-T and LMS-T Modulators, IP Satellite Modems, Diversity Receivers, IRDs and associated units. All units utilise a 19”x1RU half rack width housing for compactness and extremely light weight. This packaging has proved its worth in the portable applications where these type of units are typically deployed.

DVB-S2 Satcom and ENG IRD

IRD5200DVB-S2 Receiver with H.264 / MPEG2 Decoding

SPECIFICATIONS




IRD5200 BASE CONFIGURATION ■ Base Unit Part Number: 9002965

■ 2 x L band Inputs and 1 x L band loopthrough

■ 2 x ASI inputs ■ 1 x ASI output

■ DVB-S QPSK Demodulation 950-2150MHz

■ MPEG2 SD 4:2:0 and 4:2:2 Generic and Vislink Low Delay Decoding

■ Integral web browser control

■ SDI-SD and CVBS Video outputs

■ 2-pair audio decoding (with upgrade to 4-pair decoding when available)

DEMODULATOR:

DVB-S ■ QPSK

DVB-S2 ■ QPSK / 8PSK / 16APSK / 32APSK

L Band Input Range ■ 950-2150MHz

VHF/UHF input range ■ 58-860MHz

Symbol Rate ■ Up to 45Msymbols

DECODER:

SD ■ MPEG-2 4:2:0 & 4:2:2

HD ■ MPEG2 4:2:0 & 4:2:2 ■ Low delay MPEG-2, 4:2:0 & 4:2:2

■ H.264 4:2:0 MP, 8-bit ■ H.264 4:2:2 HP, 8-bit ■ H.264 4:2:2 HP, 10-bit

Audio ■ 4 pairs Audio MPEG-2 Layer 1 & 2,

Descrambling: ■ BISS-1 & E ■ AES 128 & 256bit (future software upgrade)

Inputs: ■ 2 x L band RF inputs - F-Type(f). Switchable LNB power

■ 1 x UHF inputs, 58-860MHz – BNC(f). Switchable Downconverter power

■ 1 x ASI input – BNC(f) (ISO/IEC 13818-2 188 bytes),

■ 10/100/1000 Ethernet connection for Video-over-IP connections - RJ45

■ 10/100 Ethernet connection for IP-based unit control – RJ45

■ USB2 connector for code updates and profile transfers

Outputs ■ SDI-SD/HD/Composite Video – BNC(f)

■ ASI output – BNC(f) (ISO/IEC 13818-2 188 bytes),

■ L band Loopthrough – BNC(f) ■ Audio Pairs #1 and #2 (analog or AES) – LEMO 4 x XLR3P breakout lead


Temperature Operational ■ 0°C to +50°C (32°F to 122°F)

Temperature Storage ■ –20°C to +70°C (–4°F to 158°F)

Size ■ 210mm wide x 350mm deep (8.27” wide x 13.78” deep)


Weight ■ 1.5 Kg (3.5lbs)

Power ■ Frequency ■ 47 to 63 Hz @ <100W

Operating Voltage ■ 100 to 240 Vac +/– 10%

Power ■ IEC Input ■ 100-240VAC ±10%, 47-63Hz <100W

06/14 ENGRD000528 Rev 1

IRD5200 in AFC5003 Half Width Lightweight Flightcase

with 5100 Exciter and AUC5814 BUC

IRD5200 LICENSE KEY UPGRADES

9002230 58-860MHz input enable

L9556 ASI over IP Encapsulation

L9557 ASI over IP Decapsulation

L9565 MPEG2 HD (Generic) upgrade

L9564 MPEG2 HD (Ultra Low delay) upgrade

L9560 H.264 4:2:0 MP & HP SD/HD Decoding

L9561 H.264 4:2:2 10-bit HP SD/HD Decoding

060-5858 DVB-S2 QPSK/8PSK Upgrade

9000415 DVB-S2 16APSK/32APSK Upgrade

Key Features

■ Capable of encoding 4K UHD, HD & SD video ■ The product uses the latest advanced HEVC encoding techniques to offer 50% bit rate reduction compared to H.264

■ The ability to encode one 4K UHD channel or up to 4 simultaneous HD video streams

■ User configurable SFP Video Interface ■ The UltraCoder can be used with the UltraDecoder to provide a complete end to end encode and decode solution


■ SNG ■ ENG ■ IP Networks

UltraCoderHEVC EncoderBeing the lightest in the world, the Vislink UltraCoder is the new lightweight 1RU, ½ rack HEVC encoder from Vislink capable of encoding 4K UHD, HD & SD video.

The system uses the latest advanced HEVC encoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. It has the ability to encode one 4K UHD video or up to 4 simultaneous HD video streams, making it the most advanced encoder in its range. Being so lightweight, it’s ideal for flyaway or vehicle mounted applications, where weight and space is critical.

Along with Vislink’s UltraDecoder this product provides a complete end to end HEVC & 4K encode and decode solution.

SPECIFICATIONS




RD001799 Rev 6.322/01/16 ENG

VIDEO PARAMETERS

Video Encoder Profiles ■ 4K UHD

■ Main 10 - 8/10bits 4.2.0 ■ Main 4.2.2 10 – 8/10 bits 4.2.0 / 4.2.2

■ 1.0 - 28Mbps ■ HD

■ Main 10 - 8/10bits 4.2.0 ■ 1.0 - 28Mbps (per channel with maximum combined rate of 28 Mbps)

■ Main 4.2.2 10 – 8/10 bits 4.2.0 / 4.2.2

■ 1.0 - 28Mbps (per channel with maximum combined rate of 28 Mbps)

■ SD ■ 4.2.0 Main 0.5 - 6Mbps ■ 4.2.2 Main 2.0 - 6Mbps

Video Inputs ■ 2 SFP+ module slots supporting electrical and optical interfaces carrying:

■ 4 x 3G-HDSDI (UHD) ■ 4 x independent HDSDI

Video Formats ■ 480i / 29.97 ■ 576i / 25 ■ 720p / 50/ 59.94 / 60 ■ 1080i / 50/ 59.94 / 60 ■ 1080p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60

■ 2160p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60

IP VIDEO OUTPUT TRAFFIC INTERFACE

Type: ■ 10 / 100 / 1000 Base–T Ethernet

Protocol ■ IEEE802.3 Ethernet ■ Encapsulation for ASI – RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP

■ MultiCast

FEC ■ Pro–MPEG Forum Code of Practice #3 release 2 (CoP3) / SMPTE 2022–2007

AUDIO PARAMETERS

Audio Encoder ■ ISO 14496-3 2006 (HE-AAC) 8 pairs

Audio Inputs ■ Embedded

FLEXIBILITY

Remote Control ■ Ethernet

■ HTTP ■ SNMP

Outputs ■ IP ■ ASI

ENVIRONMENT & PHYSICAL

Dimensions ■ 210mm wide by 350mm deep (8.27” wide by 13.78” deep)

■ 1RU, ½ rack

Weight ■ 1.9kg approx (4 lbs)

Temperature ■ Operational: 0°C to +50°C(32°F to 122°F)

■ Storage: –20°C to +70°C (–4°F to 158°F)

Power ■ <100VA ■ 90 to 264 Vac ■ 50/60 Hz

LICENCESThe following licences are available on the UltraCoder:

■ Additional HD encoding (up to 3 licences) ■ 4K UHD encoding

Audio pairs assignment examples

Video Stream 1 Video Stream 2 Video Stream 3 Video Stream 4

Valid 2 2 2 2

4 2 2 0

4 4 0 0

6 2 0 0

8 0 0 0

Invalid 4 2 1 1

Example Audio Configurations for HD channels on one UltraCoder. The Audio pairs can be split across up to 4 Video streams or used on just one stream as shown above. Pairs must be used in even numbers (2,4,6 or 8) and odd pairs are invalid.

* The UltraDecoder can only support 4 pairs of audio

Key Features

■ Capable of decoding 4K UHD, HD & SD video ■ The product uses the latest advanced HEVC decoding techniques to offer 50% bit rate reduction compared to H.264

■ The ability to decode one 4K UHD or 1 HD video channel

■ The UltraDecoder can be used with the UltraCoder to provide a complete end to end encode and decode solution


■ SNG ■ ENG ■ IP Networks

UltraDecoderHEVC DecoderBeing the lightest in the world, the Vislink UltraDecoder is the new 1RU, ½ rack HEVC & 4K UHD capable decoder. The Product uses the latest advanced HEVC decoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. Along with Vislink's UltraCoder this product provides a complete end to end HEVC & 4K UHD encode and decode solution.

SPECIFICATIONS




RD001918 Rev 422/01/16 ENG

VIDEO PARAMETERS

Video Decoder Profiles ■ 4K UHD

■ Main 10 - 8/10bits 4.2.0 ,1.0- 50Mbps

■ HD ■ Main 10 - 8/10bits 4.2.0 1.0 - 50Mbps

■ SD ■ 4.2.0 Main 0.5 - 6Mbps

Video Formats ■ 480i / 29.97 ■ 576i / 25 ■ 720p / 50/ 59.94 / 60 ■ 1080i / 50/ 59.94 / 60 ■ 1080p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60

■ 2160p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60

IP INTERFACES

VIDEO

Type: ■ 10 / 100 / 1000 Base–T Ethernet

Protocol ■ IEEE802.3 Ethernet ■ Encapsulation for ASI – RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP

■ MultiCast

AUDIO PARAMETERS

Audio Decoder ■ ISO 14496-3 2006 (HE-AAC)

Audio Outputs ■ Embedded 4 pairs in SDI ■ Embedded 4 pairs in HDMI

ENVIRONMENT & PHYSICAL

Dimensions ■ 210mm wide by 350mm deep (8.27” wide by 13.78” deep)

■ 1RU, ½ rack

Weight ■ 1.9kg approx (4 lbs)

Temperature ■ Operational: 0°C to +50°C(32°F to 122°F)

■ Storage: –20°C to +70°C (–4°F to 158°F)

Power ■ <100VA ■ 90 to 264 Vac ■ 50/60 Hz

FLEXIBILITY

Remote Control ■ Ethernet

■ HTTP ■ SNMP

Outputs ■ HDMI 1.4 (UHD) ■ Mini BNC (SD & HD) X 2 ■ RJ45 (IP) ■ BNC (ASI)

PHASE ENGENHARIA

EXCLUSIVE REPRESENTATIVE:

PHASE Engenharia Ind. e Com. Ltda.

Av. Olegário Maciel 231, Lojas 101 a 105

Barra da Tijuca | Rio de Janeiro, RJ | CEP 22 621 200

Tel +55.21.2493.0125

Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza – Torre C

Indianópolis | São Paulo-SP | CEP 04029-200

Tel +55 11 3589-0125

[email protected] | www.phase.com.br

PHASE | VISLINKMantis 1 20 Flyaway Antenna System The World’s Most Popular Flyaway Solution 1.2m...

Documents

Transcript of PHASE | VISLINKMantis 1 20 Flyaway Antenna System The World’s Most Popular Flyaway Solution 1.2m...