Pharmaseal -E - Camfil Global · PDF fileCamfil KG | Address: Feldstraße 26-32, 23858,...
Transcript of Pharmaseal -E - Camfil Global · PDF fileCamfil KG | Address: Feldstraße 26-32, 23858,...
CAMFIL FARR | PRODUCT NAME / 1
HousingThe new Camfil Pharmaseal-E Terminal hou-sing for replaceable HEPA-filter was especi-ally designed for the high requirements of the Pharma industry. The unique construction is continuously welded and therefore absolutely airtight. The „universal-knife-edge“ principle allows perfect HEPA filter tightness with zero leakage: <0.01% acc. to ISO EN 14644-3.
Continuous sheet metal from air entry to knife-edge
The whole housing is powder coated in white RAL 9010 for long lasting appearance, cleanability and resistance to decontamina-tion agents. At the factory each Pharmaseal-E has to pass the individual “Factory Acceptance Test” including a pressure decay test at 750Pa and then receives a unique serial number for traceability.
Detachable universal mounting blocks al-low quick and easy installation suspended by hangers as well as clamped to solid clean-room panels or installed in standard “T-bar” ceiling grids.
For the required airflow Camfil also offers information about the noise level of the dif-ferent grids.
Especially designed for Bio-Pharma
Fully equipped for room-sided in-situ filter test in compliance with GMP:• Test aerosol injection port• 100% sampling and pressure drop port• Indication and control of air flow
Long-term safety by construction:• Fully welded housing• “universal-knife-edge”-System• Factory acceptance test (FAT) incl. pressure decay test at 750Pa • Unique serial number for traceability
Easy installation:• Hanging suspension possible• Clamping in solid clean-room ceiling panels• Fit into standard „T-bar“ ceiling grid
Variety of air diffusers:• Grids hinged and fasteners magnetic for fast and simple filter service• Four different grids available
Applications:• Compliance with Pharma standards for turbulent rooms ISO 6 to 9• High airflow capabilities (optimized for Megalam-HD with up to 90mm pleating heights)
Pharmaseal®-EThe new solution for Terminal Housing in Bio-Pharma
www.camfilfarr.com
Size Airflow range Front dimensions (overall)
3P3 150 - 500 m³/h 428 x 428 mm
5P5 600 - 800 m³/h 595 x 595 mm
11P5 1200 - 1500 m³/h 1195 x 595 mm
CAMFIL FARR | PRODUCT NAME / 2 www.camfilfarr.com
© C
amfil K
G,
Phar
mas
eal®
-E /
Engl
ish e
d.1
/ 2
011-1
1-1
8
Pharmaseal®-EThe new solution for Terminal Housing in Bio-Pharma
Minimized production downtimes
A hinged grid with magnetic fasteners can be opened for the service. Auto-stop clamps and helpful filter guides allow one person performing the filter change safely within shortest time. The Pharmaseal-E combines process safety with highest convenience.
Thanks to a special isolation damper (option) with gel gasket the housing can be totally isolated from the remaining HVAC sys-tem. As a consequence, adjacent processes can be kept running during the filter mainte-nance. Costly downtimes can be reduced to a minimum.
Fast in situ filter test in compliance with GMP
The Pharmaseal-E is fully equipped to perform the GMP test in situ. Through a room-side injection port - connected to an integrated dispersion ring - the test aerosol (PAO or DEHS) can be spread evenly over the filter.
A second upstream access port serves the 100% sampling and the pressure drop measurement. Due to this construction the filter testing requires only little test aerosol for a short time frame. Furthermore, this leads to an accelerated test procedure and no pollution of the ducting network.
Camfil KG | Address: Feldstraße 26-32, 23858, Reinfeld | Tel.: 04533 202 0 | Fax: 04533 202 202 www.camfil .de | info@camfil .de
Top entry version
Test aerosol diffuser
Detachable mounting blocks
Side entry version
Isolation damper with knife-edge and gel gasket
Magnetic fastener
Airflow balancing and indication
Test aerosol injection port
Upstream access port for:- 100% sampling- Filter dP measurement
Auto-Stop clamps
Filter centering guides
4 W grid Perforated grid
Swirl grid Adjustable vanes
Wide range of interchangeable air diffusers
There are 4 different air diffusers which can be chosen from according to the requirements of the room.