Pharmaceutical Checkweigher
Transcript of Pharmaceutical Checkweigher
CheckweigherPharmaceutical
P r o d u c t C a t a l o gJanuary 2018
Capsules
Sachets/Sticks
Pouches
Bottles/Cans
Bags/Cartons/Cases
2
Bottles/Cans
Pouches
Sachets/Sticks
Capsules
Multi-Lane Checkweigher
Aerosol Inhaler Checkweigher
Small Bottle Checkweigher
Dual-Lane Checkweigher
Case Filling Quality Blister Pack Insert Carton
Filling control and weight check Missing insert check (magnetic ink)
Missing pack check Missing carton check
X-ray Inspection System
Case CheckweigherSSV-h Series Checkweigher
Capsule Checkweigher Metal Detector
M SeriesSSV-h Series Checkweigher
Seal/Missing tablet check
Overall quality management and control system
Missing blister pack check
Pharmaceutical Checkweigher
L i n e u p
L i n e u p O v e r v i e w
Multi-Lane Checkweighers
●Capsules
Capsule Checkweigher
●Sachets/Sticks
Multi-Lane Checkweigher
●Pouches
Dual-Lane Checkweigher
●Bottles/Cans
Small Bottle Checkweigher
Aerosol Inhaler Checkweigher
●Bags/Cartons/Cases
Versatile Checkweighers
●Other
Built-In Multi-Lane Weighing System
4
5
6
7
8
9
10
I n d e x
Aerosol Inhaler Checkweigher
Capsule Checkweigher Small Bottle Checkweigher
Quicca is a quality management software that helps you realize real-time line monitoring and analysis for complete line optimization. Product traceability and video monitoring options further enhance your quality control.
Refer to the Quicca brochure for details.
Capsules can be individually checkweighed with the industry's
highest weight accuracy of +/-0.5 mg and a maximum processing
speed of 230,000/hour.
Tool-less changeover parts for capsule sizes 000 to 5 are available.
A space-saving checkweigher for lines where multiple lanes of
products are inspected with just one unit, such as divided filling
packaging or tube filling lines. The checkweigher allows
centralized control of production records for multiple lanes with
just one indicator.
A star wheel feeds aerosol cans to the weigh table at a constant
speed and with a uniform spacing, achieving high speed weighing
with a maximum accuracy of +/-10 mg.
The weighing systems have stable transfer and high accuracy
measurement for slim, small-diameter bottles including nasal drops,
eye lotions, and cosmetic products that are difficult to transfer in an
upright position.
2
3
Bottles/Cans
Pouches
Sachets/Sticks
Capsules
Multi-Lane Checkweigher
Aerosol Inhaler Checkweigher
Small Bottle Checkweigher
Dual-Lane Checkweigher
Case Filling Quality Blister Pack Insert Carton
Filling control and weight check Missing insert check (magnetic ink)
Missing pack check Missing carton check
X-ray Inspection System
Case CheckweigherSSV-h Series Checkweigher
Capsule Checkweigher Metal Detector
M SeriesSSV-h Series Checkweigher
Seal/Missing tablet check
Overall quality management and control system
Missing blister pack check
Pharmaceutical Checkweigher
L i n e u p
L i n e u p O v e r v i e w
Multi-Lane Checkweighers
●Capsules
Capsule Checkweigher
●Sachets/Sticks
Multi-Lane Checkweigher
●Pouches
Dual-Lane Checkweigher
●Bottles/Cans
Small Bottle Checkweigher
Aerosol Inhaler Checkweigher
●Bags/Cartons/Cases
Versatile Checkweighers
●Other
Built-In Multi-Lane Weighing System
4
5
6
7
8
9
10
I n d e x
Aerosol Inhaler Checkweigher
Capsule Checkweigher Small Bottle Checkweigher
Quicca is a quality management software that helps you realize real-time line monitoring and analysis for complete line optimization. Product traceability and video monitoring options further enhance your quality control.
Refer to the Quicca brochure for details.
Capsules can be individually checkweighed with the industry's
highest weight accuracy of +/-0.5 mg and a maximum processing
speed of 230,000/hour.
Tool-less changeover parts for capsule sizes 000 to 5 are available.
A space-saving checkweigher for lines where multiple lanes of
products are inspected with just one unit, such as divided filling
packaging or tube filling lines. The checkweigher allows
centralized control of production records for multiple lanes with
just one indicator.
A star wheel feeds aerosol cans to the weigh table at a constant
speed and with a uniform spacing, achieving high speed weighing
with a maximum accuracy of +/-10 mg.
The weighing systems have stable transfer and high accuracy
measurement for slim, small-diameter bottles including nasal drops,
eye lotions, and cosmetic products that are difficult to transfer in an
upright position.
Capsules
Pouches
Bottles/C
ansBags/Cartons/Cases
Other
Sachets/S
ticks
4
Pharmaceutical Checkweigher
Emergency stop switch
Emergency stop switch
Hopper (20ℓ) (optional)
Control panel
522
805
672
Small hopper (3ℓ)
133
014
0
174
0
687
428
328
Printer (optional)
Tower light (optional) Hopper-Full limit sensor (optional)
805
174
0
672
133
014
0
Emergency stop switch
Emergency stop switch
Hopper (40ℓ) (optional)
Control panel428
328
Hopper-Full limit sensor (optional)Tower light (optional)
Small hopper (3ℓ)
1043
Printer (optional)
878
Capsule Checkweigher
KWS9001AP10
KWS9001AP20
Specifications
∗Tower light is an option.
External Dimensions
Units: mm
KWS9001AP10
Units: mm
KWS9001AP20
Weighing range: 2 to 2000 mgAccuracy (3σ): max. ±0.5 mgThroughput: max. 75,000 capsules/hour
Weighing range: 2 to 2000 mgAccuracy (3σ): max. ±0.5 mgThroughput: max. 150,000 capsules/hour
Capsules
Pouches
Bottles/C
ansBags/Cartons/Cases
Other
Sachets/S
ticks
KWS9001AP20
Model KWS9001AP10 KWS9001AP20Weighing range 2 to 2000 mgScale interval 0.1 mgMaximum throughput 1 75,000 capsules/h 150,000 capsules/hLane 10 lanes 20 lanes
Maximum accuracy 1 +/-0.5 mgDisplay 15-inch color LCDOperation method Touch panel + Key (Start, Stop, and Home are direct push buttons)Indication range 2045.0 mgPreset memory Maximum 50Classification 2 4 ways (overweight/correct weight/underweight/unclassified)Product size Capsule No. 000 to 5Power requirements 3 100 Vac to 115 Vac +10% –15%, single phase, 50/60 Hz, rush current 74 A (typ.) (90 ms or less)Power consumption 550 VA 1200 VAAir requirements 0.3 to 0.9 Mpa, Air supply port: nylon tube of 8 mm dia.Mass 350 kg 500 kgEnvironmental conditions 15°C to 30°C (variation not to exceed 1°C/h to maintain accuracy), relative humidity 30% to 70% (non-condencing)Protection class IP30 (IP50 for weighcell)Exterior Stainless steel (SUS304)Data output USB port (USB 2.0)
1: Maximum throughput and maximum accuracy may vary depending on capsule size, filling content and quantity.2: A rejection gate is installed per 10 lanes.3: 120 Vac, 200 Vac to 240 Vac are available as an option. Note: The noise level of the checkweigher is 78 dB(A) or less.
* 30 lanes available.
5
Pharmaceutical CheckweigherS
achets/Sticks
Capsules
Pouches
Bottles/C
ansBags/Cartons/Cases
Other
Multi-Lane Sachet & Stick Checkweigher (6 lanes)
KWS6233F□6*
* 2, 3, 4, 5, 8, 10, and 12 lanes are available.* Weighing range, accuracy, and throughput other than above available.
Model KWS6233FP06Lane 6Weighing range 1.2 to 600 gScale interval 0.01 gMaximum throughput 1 200 products/min per laneMaximum accuracy (3σ) 1 ±0.010 gDisplay 15-inch color LCDOperation method Touch panel (Start, Stop, Home are direct push buttons)Indication range 600.9 gPreset memory Maximum 50Classification 2 (3 as an option)
Product size 2
Width 10 to 40 mmLength 46 to 230 mmHeight 5 to 60 mm
Belt speed 15 to 60 m/minPower requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, 550 VA, rush current 30 A (typ.) (130 ms or less)Air inlet(with exclusive-use rejector) 0.4 to 0.9 MPa, 0.2ℓ [A.N.R.] (Maximum capacity per rejection operation per lane)
Mass 200 kgEnvironmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensingProtection class IP30 complianceExterior Stainless steel (SUS304)Data output USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)
1: The speed and accuracy vary according to the products to be weighed, the rejector and setting conditions.2: Consult us about semi-transparent and transparent products.Note: The rejector may be self-standing type.Note: The noise level of the checkweighers does not exceed 70 dB(A).Note: Weighing range, accuracy, and throughput other than above are available at your request.
Specifications
1: The length of line heights, line pitch, and belt width can be customized for your requirements. 2: The minimum line height is 400+50/-20 mm.
External Dimensions
Indicator
Line No.6
Line No.1
Flow direction
270Weigh conveyor
Leg spacing
770Leg spacing
Switch
620153 223M20
335
950
5 5 335
60 dia.
47 133
Line
hei
ghts
700
to 8
00 1
, 2
920
84
18 dia. Roller 18 dia.
Roller
(131
0)
Printer (optional)
30 (
80 a
s an
opt
ion)
Pas
s he
ight
Tower light (optional)
Air supply inlet quick-disconnectcoupling with tubeouter 10 dia.
996
400
333
263
80 1
40 1
67Bel
t wid
th
Units: mm
KWS6233FP06
Weighing range: 1.2 to 600 gAccuracy (3σ): max. ±0.010 gThroughput: max. 200 products/min x 6 lanes
Listed here are just a part of our entire product line. We offer a range of checkweighers to meet different sizes of applications.
KWS6233FP06 (6 lanes)
6
Pharmaceutical Checkweigher
Dual-Lane Checkweigher
KWS5265GW02
Model KWS5265GW02Weighing range 6 to 600 gScale interval 0.05 gThroughput 1 330 products/min per laneAccuracy (3σ) 1 ±0.2 gDisplay 8.5-inch color TFT LCDOperation method Touch panel (Start, Stop, Home are direct push buttons)Indication range 604.5 gPreset memory Up to 200Classification 2 or 3
Product size 2
Width 20 to 160 mmLength 60 to 200 mmHeight 5 to 200 mm
Belt speed 9 to 97 m/minPower requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, 460 VA, rush current 20 A (typ.) (20 ms or lower)Mass 100 kgEnvironmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensingProtection class IP66Exterior Stainless steel (SUS304)Data output USB2.0, 10BASE-T, 100BASE-TX Ethernet
1: Depends on the product to be weighed and the rejector.2: Depends on the rejector. Consult us about transparent or semi-transparent products.Note: Noise level does not exceed 70 dB(A).Note: Weighing range, accuracy, and throughput other than above are available.
Specifications
External Dimensions
160
160
775
Leg
spac
ing
948
268
230
450
Printer (optional)
Tower light (optional)
Flow
Indicator
Line
hei
ghts
Belt w
idthBe
lt width
300 153
700
to 8
5076
0
270545
25 dia.Roller
25 dia.Roller
M2060 dia.410
Leg spacing 10530
230
Units: mm
KWS5265GW02
Weighing range: 6 to 600 gAccuracy (3σ): max. ±0.2 gThroughput: max. 330 products/min x 2 lanes
Pouches
Capsules
Bottles/C
ansBags/Cartons/Cases
Other
Sachets/S
ticks
Listed here are just a part of our entire product line. We offer a range of checkweighers to meet different sizes of applications.
KWS5265GW02
7
Pharmaceutical CheckweigherB
ottles/Cans
Capsules
Pouches
Bags/Cartons/CasesO
ther S
achets/Sticks
Small Bottle Checkweigher
KWS9223 type
KWS9223BPHB
Model KWS9223BPHB KWS9223BPHCWeighing range 1 1.2 to 600 gScale interval 0.01 gThroughput 2 Maximum 200 products/minAccuracy (3σ) 2 Maximum ±0.02 gDisplay 8.5-inch wide color TFT LCDOperation method Touch panel (Start, Stop, and Home are direct push buttons)Indication range 600.9 gPreset memory Maximum 200Classification 2 or 3
Product size 3
Width 20 to 40 mmLength 20 to 40 mmHeight 50 to 150 mm
Belt speed 15 to 60 m/minPower requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, rush current 40 A (typ.) (40 ms or less)Power consumption 700 VA 550 VAAir requirements 0.5 to 0.9 MPa, 16ℓ/min [A.N.R.] for air jet rejector Air supply not required (Air jet rejector not mounted)Mass 135 kg 90 kgEnvironmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensingProtection class IP30Exterior Stainless steel (SUS304)
1: Maximum weight capacity for KWS9223BPHB air jet rejector is 200 g.2: Accuracy and throughput depends on the application and the rejector.3: Varies according to the rejector. Consult us when the product is transparent or semi-transparent.Note: The noise level of this system does not exceed 70 dB(A).Note: Optional compliance with FCC Part 15 available.
Specifications
External Dimensions
355
420 94
0
165
Leg
spac
ing
60 dia.M20
270 Windshield
Weighing unit
Flowdirection
Adjustment steering wheel
Indicator
Line
hei
ghts
Air jet rejector
700
to 8
50
18 dia. roller
40
Air inlet
10 mm (outer dia.) quick coupling
Bel
t wid
th
Printer (optional)
9 273
271171
151
965
1407
NG–BOX
Leg spacing
430
375
690
Units: mm
KWS9223BPHB
Flowdirection
151
9 273
171171 370
712
Line
hei
ghts
Indicator
Adjusting handle
270
700
to 8
50
40 Bel
t wid
th
Printer (optional)
Leg spacing
430
375
355
420 94
0
165
Leg
spac
ing
690
60 dia.M20
Windshield
Weighing unit
Units: mm
KWS9223BPHC
Weighing range: 1.2 to 600 gAccuracy (3σ): max. ±0.02 gThroughput: max. 200 products/min
Listed here are just a part of our entire product line. We offer a range of checkweighers to meet different sizes of applications.
8
Pharmaceutical Checkweigher
Aerosol Inhaler Checkweigher Made To Order
KW9627AP00
KW9627AP00
Model KW9627AP00Weighing range 0.5 to 60 gScale interval 0.002 gThroughput Maximum 150 products/minAccuracy (3σ) 1 Maximum ±0.01 gDisplay 10.4-inch color TFT LCDOperation method Touch panelIndication range 60.450 gPreset memory Maximum 100Classification 3Product size
Can size 21.5 / 22.0 / 23.5 / 25.0 mm diameter 2
Height 40 to 80 mmBelt speed 14 m/minPower requirements 3 100 Vac to 115 Vac +10% –15%, single phase, 50/60 Hz, 400 VAAir requirements 0.4 MPa, 20ℓ/min [A.N.R.] (Use dry air.)Mass 150 kgEnvironmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensingProtection class IP30Exterior Stainless steel (SUS304) (excluding some parts)
1: The accuracy depends on the application.2: Fixed by size, and cannot be shared. Contact our sales representatives for other sizes.3: 200 Vac to 240 Vac is also available as an option.Note: The noise level of this system is 72 dB(A).
Specifications
External Dimensions
820
720
100
6275
0
560
Leg
spac
ing
260
Leg
spac
ing
Air inlet8 mm (outer dia.) quick coupling
410
927902 25
Flow direction
Indicator
550Leg spacing
NG box
1565
to 1
635
815
to 8
85Li
ne h
eigh
ts
Units: mm
KW9627AP00
Weighing range: 0.5 to 60 gAccuracy (3σ): max. ±0.01 gThroughput: max. 150 products/min
Bottles/C
ansC
apsulesP
ouchesBags/Cartons/Cases
Other
Sachets/S
ticks
9
Pharmaceutical Checkweigher
Aerosol Inhaler Checkweigher Made To Order
Bags/Cartons/CasesC
apsulesP
ouchesB
ottles/Cans
Other
Sachets/S
ticks
Checkweighers for Bags/Pouches, Cartons, and Cases
Cartons
Bags/Pouches External Dimensions
160
Bel
t wid
th 610
495
Leg
spac
ing
400
210
670
Printer(optional)
Indicator
153300
Tower light(optional)
236
18 dia.roller
700
to 8
50Li
ne h
eigh
ts
410Leg spacing
60 dia. M20
105
18 dia.roller
Flow direction
345
695
180
Large cases
Units: mm
Model KWS6206BF06 / KWS6206BP06Weighing range 1.2 to 600 gScale interval 0.01 gThroughput 1 Maximum 320 products/minAccuracy (3σ) 1 Maximum ±0.015 gDisplay 8.5-inch wide color TFT LCDOperation method Touch panel (Start, Stop, and Home are direct push buttons)Indication range 600.9 gPreset memory Maximum 200Classification 2 or 3
Product size 2
Width 20 to 160 mmLength 46 to 320 mmHeight 5 to 320 mm
Belt speed 15 to 120 m/min
Power requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, 130 VA, rush current 20 A (typ.) (20 ms or less)
Mass 60 kg
Environmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensing
Protection class IP30Exterior F type: Painted P type: Stainless steel (SUS304) (excluding some parts)Data output USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)
Specifications
1: Accuracy and throughput depends on the application and the rejector. 2: Varies according to the rejector. Consult us when the product is transparent or semi transparent. Note: The noise level of this system is 70 dB(A) or lower. Note: Optional compliance with FCC Part 15 available.
External Dimensions
270
670
400
250
Bel
t wid
th
67049
5Le
g sp
acin
g
25 dia.roller
25 dia.roller
345
695
M2060 dia.
180 410Leg spacing
105
700
to 8
50Li
ne h
eigh
ts
Tower light(optional) Printer
(optional)153300
236
Indicator
Flow direction
Units: mm
Model KWS5412BF12 / KWS5412BP12Weighing range 12 to 3000 gScale interval 0.1 gThroughput 1 Maximum 320 products/minAccuracy (3σ) 1 Maximum ±0.2 gDisplay 8.5-inch wide color TFT LCDOperation method Touch panel (Start, Stop, and Home are direct push buttons)Indication range 3009 gPreset memory Maximum 200Classification 2 or 3
Product size 2
Width 20 to 250 mmLength 60 to 310 mmHeight 5 to 310 mm
Belt speed 15 to 120 m/min
Power requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, 250 VA, rush current 20 A (typ.) (20 ms or less)
Mass 64 kg
Environmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensing
Protection class IP30Exterior F type: Painted P type: Stainless steel (SUS304) (excluding some parts)Data output USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)
Specifications
1: Accuracy and throughput depends on the application and the rejector. 2: Varies according to the rejector. Consult us when the product is transparent or semi transparent. Note: The noise level of this system is 70 dB(A) or lower. Note: Optional compliance with FCC Part 15 available.
External Dimensions
Printer(optional)
153300
236
400
Bel
t wid
th
820
645
Leg
spac
ing
500Leg spacing
39 dia.roller
650
M20
5595
60 dia.
700
to 8
50Li
ne h
eigh
ts
Indicator
Tower light(optional)
345
670
475
Flow direction
Units: mm
Model KWS5728BFNN / KWS5728BPNNWeighing range 60 to 25000 gScale interval 2 gThroughput 1 Maximum 40 products/minAccuracy (3σ) 1 Maximum ±2 gDisplay 8.5-inch wide color TFT LCDOperation method Touch panel (Start, Stop, and Home are direct push buttons)Indication range 25090 gPreset memory Maximum 200Classification 2 or 3
Product size 2
Width 20 to 450 mmLength 88 to 600 mmHeight 5 to 600 mm
Belt speed 5 to 29 m/min
Power requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, 250 VA, rush current 20 A (typ.) (20 ms or less)
Mass 66 kg
Environmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensing
Protection class IP30Exterior F type: Painted P type: Stainless steel (SUS304) (excluding some parts)Data output USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)
Specifications
1: Accuracy and throughput depends on the application and the rejector. 2: Varies according to the rejector. Consult us when the product is transparent or semi transparent. Note: The noise level of this system is 70 dB(A) or lower. Note: Optional compliance with FCC Part 15 available.
Listed here are just a part of our entire product line. We offer a range of checkweighers to meet different sizes of applications.
10
Pharmaceutical Checkweigher
Other
Capsules
Pouches
Bottles/C
ansBags/Cartons/Cases
Sachets/S
ticks
Built-In Multi-Lane Weighing System
Specifications
KWS9006AN□□ / AP□□Weighing range: 0.1 to 50 gAccuracy (3σ): max. ±0.002 gThroughput: max. 100 products/min (per lane)
Model 1 KWS9006AN□□ KWS9006AP□□ KWS9005AN□□ KWS9005AP□□Weighing range 0.1 to 50 g 0.2 to 100 gScale interval 0.001 g 0.01 gThroughput 2 100 products/min per laneAccuracy (3σ) 2 Maximum ±0.002 g Maximum ±0.05 gDisplay 15-inch color TFT LCDOperation method Touch panel (Start, Stop, Home are direct push bottons)Indication range 50.090 g 100.90 gPreset memory Up to 50 Lane Up to 12Power requirements 100 Vac to 120 Vac +10% –15% or 200 Vac to 240 Vac +10% –15%, single phase, 50/60 Hz, rush current 12 A (typ.) (20 ms or less)Power consumption 50 to 130 VA 30 to 80 VAMass Indicator: 4 kg; Controller: 6 kg; Weighing unit: 1.5 kg; Controller chassis: 40 kgEnvironmental conditions 0°C to 40°C (variation not to exceed 5°C/h to maintain accuracy), relative humidity 30% to 85%, non-condensing
Protection classIndicator: IP50; Weighing unit: IP50Controller: IP20 Controller chassis: IP50 Controller: IP20 Controller chassis: IP50
ExteriorIndicator: SUS; Weighing unit: SUSController: aluminum Controller chassis: SUS Controller: aluminum Controller chassis: SUS
Data output USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)External I/F I/O contact, serial or CC-Link
1: □ indicates the number of lane.2: Depends on the product to be weighed.Note: The device complies with part 15 of the FCC Rules.
External Dimensions
300
or m
ore
*
4×9 dia.
4×5 dia.
3×4.3 dia.
75 dia.
300
or m
ore
*
KWS9006AN□□ / KWS9005AN□□
1: Dimensions of weighing unit is for 12 lanes.2: Shapes of weighing table and weighing table stand depend on the specifications. Contact us for detailed dimensions.
CC-Link is a registered trademark of CC-Link Parther Association (CLPA).
300
or m
ore
*
4×9 dia.
4×5 dia.
3×4.3 dia.
75 dia.
300
or m
ore
*
KWS9006AP□□ / KWS9005AP□□
Units: mm
KWS9005AN□□ / AP□□Weighing range: 0.2 to 100 gAccuracy (3σ): max. ±0.05 gThroughput: max. 100 products/min (per lane)
* Designed to be integrated with filling/packing equipment.
11
Note
CheckweigherPharmaceutical
P r o d u c t C a t a l o gJanuary 2018
Capsules
Sachets/Sticks
Pouches
Bottles/Cans
Bags/Cartons/Cases
2018-1 (CDT) Printed in JapanCAT. NO. K3191-F-1
2013