PG-N Cable Gland - ck-electrical.comck-electrical.com/document/ftproot/Electrical Accessory.pdf ·...

PG Cable GlandPG Cable GlandPG Cable GlandPG Cable GlandPG Cable Gland

PG-N Cable GlandPG-N Cable GlandPG-N Cable GlandPG-N Cable GlandPG-N Cable Gland

JG Insulating CloseoverJG Insulating CloseoverJG Insulating CloseoverJG Insulating CloseoverJG Insulating Closeover

MG Cable GlandMG Cable GlandMG Cable GlandMG Cable GlandMG Cable Gland

D1 D2

L1 L2

B1

L3

Lock Nut Waster Body Claw Seals Nut

www.ck-electrical.com

172Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]


Tubing and Quick System-Screw Connection AssemblyTubing and Quick System-Screw Connection AssemblyTubing and Quick System-Screw Connection AssemblyTubing and Quick System-Screw Connection AssemblyTubing and Quick System-Screw Connection Assembly

Simple,Quick,Reliable,SafeNo additional tools; Easy to install and uninstall; Extremely save time

Properties:Flexibility and ductility, glossy surface ,anti-friction,excellent chemical resistance to: acids ,alkalies and corrosion. And most products are free of halogen , phosphor and cadmium. Black tubings are UV-resistant and self-extinguising.

Application: Mechanical building ,heavy equipment ,electric factory ,underground, electric vehicle,chemical industry etc.

Material:Polypropylene(PP),Polyethylene(PP),Polyamide(PA6,PA12)

IP degree:IP65,IP66,IP68Temperature range: -40� to 105�, max up to 150� for a short period of timeFlame retardant: HB,V2,V0(UL94)

Selection:Determine the bubing dimension according to the outer diameter of the cables and suggest 10% spare space.

Choose the suitable connector according to thread standard ,protection degree ,using environment etc.

Installation:1.Push the tubing into the connector and its assembly is done .

Push again until it can not snap-in any more ,We completer its flxing so that it can reach some protection degree.

2.Press the ring of the snap-in -sleeve to the connector case then pull the bubing out or the connector.

Quick Screw Connector Elbow ConnectorTubing clampTubing Clamp Without Cover

Polyethylene Tubing Polypropryene Tubing


Nylon Cable TieNylon Cable TieNylon Cable TieNylon Cable TieNylon Cable Tie

Material: Nylon 66, 94V-2 certificated by UL. Heat-resisting, erosion control & insulate.Operating temperature: -40°C to 85°C.Color: Natural (or white, standard color), UV black and other colors are available as requested.

Application

Specifications

L

W E

Bundlediameter

(mm)2-112-162-182-222-0

2-332-352-403-503-333-353-423-503-653-703-803-1023-243-423-463-503-653-703-823-903-1023-1053-1103-1303-333-423-504-634-824-904-1054-1184-1508-1608-19010-22510-26510-29510-12512-15012-17512-20514-19010-220

W(mm)

2.52.52.52.52.52.52.52.52.53.53.53.53.53.53.53.53.54.84.84.84.84.84.84.84.84.84.84.84.87.07.07.07.07.07.97.97.97.99.09.09.09.09.0

10.010.010.010.012.012.0

mm6080901001201401501602001401501802002502803003701201801902002502803003503804004304501501802002503003504004505005506507609201020450500600700650750

Inch2 3/8´́

3 3/16´́

3 5/8´́

4´́4 3/4´́

5 1/2´́

6´́6 1/4´́

8´́5 1/2´́

6´́7´́8´́10´́11´́

11 5/8´́

14 1/2´́

4 3/4´́

7´́7 1/2´́

8´́10´́10´́

11 5/8´́

13 3/4´́

15´́15 3/4´́

17´́17 3/4´́

6´́7´́8´́10´́

11 5/8´́

13 3/4´́

15 3/4´́

17 3/4´́

19 11/16´́

21 11/16´́

25 9/16´́

30´́36 1/4´́

40 6/1´́

17 3/4´́

19 11/16´́

23 3/2´́

27 1/2´́

25 9/16´́

29 9/16´́

L

KGS8888888881818181818181818222222222222222222222222555555555555555555808080808091919191114114

LBS1818181818181818184040404040404040505050505050505050505050

120120120120120120120120120175175175175175200200200200250250

Min.looptensile strengthItem NO.

3 x 603 x 803 x 903 x 1003 x 1203 x 1403 x 1503 x 1603 x 2004 x 1404 x 1504 x 1804 x 2004 x 2504 x 2804 x 3004 x 3705 x 1205 x 1805 x 1905 x 2005 x 2505 x 2805 x 3005 x 3505 x 3805 x 4005 x 4305 x 4508 x 1508 x 1808 x 2008 x 2508 x 3008 x 3508 x 4008 x 4508 x 5009 x 5509 x 6509 x 7609 x 920

9 x 102010 x 45010 x 50010 x 60010 x 70012 x 65012 x 750



Plastic AccessoriesPlastic AccessoriesPlastic AccessoriesPlastic AccessoriesPlastic Accessories

Spiral wrapping bands Cable markers strips Cable markers

Set pieces R Type cable clamps

Expand nail

Screw on wire connectors

Screw on wire connectors Double wings screw on wire connectors

Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]


175

SM-14 SM-24 SM-30 SM-40 SM-76

Telephone Wiring Duct Slotted Wiring Duct

Coxial Cable Nail ClipFlat Nail ClapRound Nail Clap

Round Wiring Duct PZC Wiring Duct

TTB TTC




• Function: 1. Wire coat and insulation. 2. Make the joint of terminal block and wire insulated. 3. Divide the colors. 4. Waterproof. 5. Protection and insulation of insistors and electrical capacitors.• Standard color: black, white, red, blue, yellow, green, brown, grey, orange and purple.

Heat Shrinkable TubingHeat Shrinkable TubingHeat Shrinkable TubingHeat Shrinkable TubingHeat Shrinkable Tubing

As Supplied Contained Wire (mm2)Item.No.

RS-1RS-1.5RS-2

RS-2.5RS-3

RS-3.5RS-4RS-5RS-6RS-7RS-8RS-9RS-10RS-11RS-12RS-13RS-14RS-15RS-16RS-18RS-20RS-22RS-25RS-28RS-30RS-35RS-40RS-50RS-60RS-70RS-80RS-90RS-100RS-120RS-150

I.D(mm)1.01.52.02.53.03.54.05.06.07.08.09.0

10.011.012.013.014.015.016.018.020.022.025.028.030.035.040.050.060.070.080.090.0100.0120150

Thickness0.2±0.050.2±0.05

0.25±0.050.25±0.050.25±0.050.25±0.050.25±0.050.35±0.050.35±0.050.35±0.050.35±0.050.35±0.050.35±0.050.35±0.050.35±0.10.35±0.10.35±0.10.35±0.10.35±0.10.4±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.6±0.10.6±0.10.6±0.10.6±0.10.7±0.10.7±0.10.8±0.1

I.D(mm)0.5

0.751.0

1.251.5

1.752.02.53.03.54.04.55.05.56.06.57.07.58.09.0

10.011.012.514.015.017.520.025.030.035.040.045.050.060.075.0

Thickness0.4±0.050.4±0.050.45±0.10.45±0.10.45±0.10.45±0.10.45±0.10.55±0.10.55±0.10.55±0.10.55±0.10.55±0.10.60±0.10.60±0.10.70±0.10.70±0.10.70±0.10.70±0.10.70±0.10.80±0.10.90±0.10.90±0.10.90±0.10.90±0.11.00±0.21.00±0.21.00±0.21.00±0.21.20±0.21.20±0.21.20±0.21.30±0.21.30±0.21.30±0.21.60±0.2



Terminnal BlockTerminnal BlockTerminnal BlockTerminnal BlockTerminnal Block



Specifications

TERAMINAL BLOCKS H, U(W), V(F) TYPE

Material: made from PA, PE or PP.

Item NO.

TBS-3A

TBS-6A

TBS-10A

TBS-16A

TBS-20A

TBS-30A

TBS-60A

TBS-80A

TBS-100A

L

93

115

126

139

155

171

192

205

250

W

16

15.7

20.2

23

25

26

30

33

46

H

12

13

15.5

17.7

19.2

20.5

26

27

31

A

6

6.5

8.4

10.3

11.5

12

13.5

15

22

B

8

9.5

10.5

12

13.5

14.5

16.5

17

21

mm2

4

6

10

12

14

16

25

35

40

VOLT

400V

400V

400V

400V

400V

400V

400V

400V

400V

AMP

3A

6A

10A

16A

20A

30A

60A

80A

100A

Packing

10PCS

178

Terminnal BlockTerminnal BlockTerminnal BlockTerminnal BlockTerminnal Block

Model

TB-1503

TB-1504

TB-1506

TB-15012

TB-2503

TB-2504

TB-2506

TB-2512

TB-3503

TB-3504

TB-3506

TB-3512

TB-4503

TB-4504

TB-4506

TB-603

TB-604

TB-606

TB-1003

TB-1004

TB-1006

Specifications

RatingNumber of

pole

3

4

6

12

3

4

6

12

3

4

6

12

3

4

6

3

4

6

3

4

6

L

46

55

73

127

50

62.5

91

163

50

62.5

91

163

70

86

120.5

70.5

93.5

129

86.5

108

153

L1

36.5

45.5

63.5

118

40

57

81.5

153

40

57

8.5

153

60.5

75.5

110

62.5

82.5

118

75.5

96

140

A

7.5

7.5

7.5

7.5

10.5

10.5

10.5

10.5

10.5

10.5

10.5

10.5

15

15

15

15.5

15.5

15.5

22

22

22

B

9

9

9

9

12

12

12

12

12

12

12

12

17

17

17

18

18

18

20

20

20

C

M3

M3

M3

M3

M4

M4

M4

M4

M4

M4

M4

M4

M5

M5

M5

M6

M6

M6

M6

M6

M6

D

22

22

22

22

30

30

30

30

30

30

30

30

38

38

38

38

38

38

43.5

43.5

43.5

E

17

17

17

17

20

20

20

20

20

20

20

20

23.5

23.5

23.5

31

31

31

35

35

35

600V

25A

600V

15A

600V

35A

600V

45A

600V

60A

600V

100A

TB

TC

Dimensions(mm)



179

USLKG 4N USLKG 6N USLKG 10N USLKG 16N

UK 2.5N UK 3N UK 5N UK 10N UK 16N

UK 2.5N USLKG 6N USLKG 2.5N USLKG 4N

JXB 42 JXB 62 JXB 102 E/UK E/MK

URTKSS URTKS URTK JXB

Terminal ConnectorTerminal ConnectorTerminal ConnectorTerminal ConnectorTerminal Connector

UK 50N



180

LBV1-3

RNB1-3.2 RNB1-3.7 RNBM1-3.7 RNBM1-3.2 RNBS1-5 RNB1-10

RNB2-3.2 RNBM2-4 RNBL2-4 RNBS2-5 RNBL2-5 RNB2-10

RNBM3-4 RNBS3-5 RNBL3-6 RNBL5-4 RNBL5-6 RNB5-8

RNB1-3.2 RNB1-3.7 RNBM1-3.7 RNBL1-4 RNBS1-5 RNB1-6

RNB2-3.2 RNBM2-3.7 RNBS2-4 RNBM2-4 RNBS2-5 RNB2-6

RNB3-4 RNB3-5 RNB3-6 RNBL5-4 RNB5-6 RNBS5-6

RV1.25-3.2 RVS1.25-3.7 RVL1.25-3.7 RVL1.25-4

RVL1.25-4 RV1.25-5 RV1.25-6 RV1.25-8 RV1.25-10

RV2-3.2 RVS2-3.7 RVM2-3.7 RVS2-4 RVL2-4

RVM1.25-3.7

RVS2-5 RVL2-5 RV2-6 RV2-8 RV2-10

RV3.5-4 RVS3.5-5 RV3.5-6 RV5.5-10

RVS5.5-4 RVL5.5-4 RV5.5-5 RV5.5-6 RVS5.5-8

SV1.25-3.2 SVS1.25-3.7 SVL1.25-3.7 SVS1.25-4 SVM1.25-4

SVS1.25-5 SVS1.25-6 SV2-3.2 SVS2-3.7 SVM1.25-4

E0508 E7508 E1008 E1508 E2508 E4009 E1012

PTV1-10 PTV2-12 PTV5-13 DBV1-10 DBV2-10 DBV5-10

MDD1-250 MDD2-250 MDD5-250 MPD1-156 MPD2-156MPD5-195

HV1-4 HV2-5 HV5-5BV1 BV2 BV5

FSV2-5

SVM2-4 SVS2-5 SVS2-6 SV3.5-4 SV3.5-5

SVL5.5-4 SV5.5-4 SVS5.5-6 SVL5.5-8 SV5.5-8

FDD1-110 FDD1-187 FDD2-187 FDD2-187 FDD2-250 FDD5-250

TerminalTerminalTerminalTerminalTerminal

RVT1 RVT2 RVT5 FRD1-156 FRD2-195 FRD5-195



181

Electric Cable FittingElectric Cable FittingElectric Cable FittingElectric Cable FittingElectric Cable Fitting

DTL series Al-Cu connection terminal is suitable for transition joint of distribution device aluminium core cable and electric equipment.

DL aluminium is used for aluminium terminal linking of aluminium core cable and electric equipment.DT copper terminal is used for

copper terminal electric equipment. DT copper terminal is used for copper terminal linking of copper core cable and electric

equipment,L2: aluminium material,T2:copper material. The products adopt friction welding workmanship. It has advantage of good

electric conductance,electrochemical corrosion resistance, long service life.

GTL copper aluminium connection tube is suitbable for the transition linking of distribution cable and copper core cable,GL aluminiu

connection tube is used for the linking of copper core cable,GT series oil-blocking type connection pipe is machined with T2 bar

copper,GT series through-hole type connection pipe is pressed with T2 copper pipe,GTL series of copper-aluminium connection

pipe is processed through friction welding workmaship and of reliable qualtiy.

GT-G,GL-G Al-Cu connecting tubeDTL-1 Cu-Al connecting terminalDT,DL copper Aluminium connecting terminal

GTL Cu-Al connecting tube DTL-2 Cu-Al connecting terminal(outlet type) DTGA spy hole copper connecting terminal

DTGB copper connecting terminalDTGS copper connecting terminalJG copper connecting terminal

C45 plug-in needleGTY copper connecting tubeDTGY copper connecting terminal

GTY copper connecting tube OT copper hatch terminal DTF-copper water-proof terminal

Applications



182

70mm AL162-702-1 AL302-300250mm 35mm 16mm

AL252-352 AL952-1202 CU8-502

AL16-702-2

CU8-502

AL16-702-1

CU8-502

AL16-702/12M2

CU35-2402

AL35-3002

CU10-952 AL25-1502

Electric Cable FittingElectric Cable FittingElectric Cable FittingElectric Cable FittingElectric Cable Fitting

GT series cable connectors are applicable for the connection of

the circular wire power supply cable in distribution equipment.They

are made of tin coated 99.9% pure copper tube and coated in.

TYPEGT-1.5GT-2.5GT-4

GT-5.5GT-10GT-16GT-25GT-35GT-50GT-70GT-95

GT-120GT-150GT-185GT-240GT-300GT-400GT-500GT-630GT-800

GT-1000

D(MM)3.74

4.85.56.87.59

10.512.514.517.519.521

23.526.5303438455056

d(MM)1.82.53.13.84.85.57

8.29.811.513.515

16.518.521242730353944

L(MM)2020202530354045505560657075808590

100110150170

It’s suitable for transition connection of the electric appliances

of indoors distributing device and kinds of wire cables. It adopts

T2 red copper, the surface nickle plating.

TYPEA16-25

A95-120

A25-35

A120-150

A50-70

A150-185

A70-95

A150-185

TYPE B16-25 B25-35 B50-70 B120-150 B210-250

It’s suitable for transition connection of the electric appliances

of indoors distributing device and kinds of wire cables, made

of brass by die-cast and coated nickle.

Applications

Specification

Applications

Specification

Applications

Specification



183

Warning LightWarning LightWarning LightWarning LightWarning Light

LTE/LTD-1105 Bulled Type

LTE-1103 Straight line type

LTE-1102 Inner octagonal type

LTE-1104 Round type

LTE/LTD-1081 Small round type

LTD-1201 Stram line siren

MS-190 Mini Motor siren

MS-290 Motor siren

LTB-2181L/B

Traffic road-block waring light

LTA205-1/2/3/4/5

Multilayer type



184

Type ZP is applicable for the electrical rectifying circuits turning AC to DC. Type KP is

used as a controlled rectifier and a switch in AC system with frequency lower than

400Hz.

ZP KP Silicon Controlled RectifierZP KP Silicon Controlled RectifierZP KP Silicon Controlled RectifierZP KP Silicon Controlled RectifierZP KP Silicon Controlled Rectifier

Application

Specifications

Din RailsDin RailsDin RailsDin RailsDin Rails

Suitable for mounting various modular units.

Application

• Material: steel, zinc electroplated with yellow achromate passivation. aluminium alloy

optional.

• Color: yellow or silver gray.

• Length: 2m, 1m and other lengths upon request.

• Standards: DIN 46277, CENELEC EN 50.0222, EN50.023, EN50.035.

Technical Data

Cat.No.: DR101

Dimensions (mm): 35 � 7.5 � 1(W � H � T)

Length Meters(m): 1, 2

Cat.No.: DR102

Dimensions (mm): 35 � 7.5 � 1(W � H � T)


Cat.No.: DR201

Dimensions (mm): 35 � 15 � 1.5(W � H � T)


DR101

DR102

DR201

ZP

KP

Type

KP10

KP20

KP50

KP100

KP200

Average

Through

Current

(A)

10

20

50

100

200

Average

Through

Voltage

(V)

� 0.8

� 0.8

� 0.8

� 0.8

� 0.9

Gate Triggering

Current Voltage

(mA/V)

5-70/ � 3.5

5-100/ � 3.5

8-150/ � 3.5

10-250/ � 4

10-250/ � 4

Average Obverse

and Reverse

Repeat Current

(mA)

<1

<1

<2

<4

<4

Average Obverse

and Reverse

Repeatpeak Voltage

(V)

100-1600

100-1600

100-1600

100-1600

100-1600

Type

ZP5

ZP20

ZP50

ZP100

ZP200

Rated Obverse

Average Current

(A)

5

20

50

100

200

Rated Obverse

Average Voltage

(V)

� 0.7

� 0.7

� 0.8

� 0.8

� 0.8

Reverse Repeat

Peak Voltage

(V)

100-1600

100-1600

100-1600

100-1600

100-1600

Average Reverse

Repeat Current

(mA)

<1

<2

<4

<6

<8



187

Comb BusbarComb BusbarComb BusbarComb BusbarComb Busbar

• The busbars ease wiring of electrical item, enlarge connection area, decrease temperature rise and thus increase the electrical

reliability of electrical items.

• Material is of fire-resistant PVC and red copper

• Current rating is up to 100A

• Rated voltage is up to 415V

• Applicable ambient temperature -25°C~50°C• Standard length 1m, other length to be made upon request.

Application

Specifications

Rated

Current

(A)

Number of

Poles

Cross

Section

(mm)

Length

(mm)

63

100

63-100

63

100

63-100

63

100

63-100

63

100

63-100

56 x 1

56 x 1

56 x 1

27 x 2

27 x 2

27 x 2

18 x 3

18 x 3

18 x 3

14 x 4

14 x 4

14 x 4

20

20

20

20

20

20

20

20

20

20

20

20

100

100

100

100

100

100

100

100

100

100

100

100

Busbar connection

For single pole MCBs

For 2 pole MCBs & single pole MCBs

with disconecting neutral NA

For 3 pole MCBs

For 4 pole MCBs & 3 pole MCBs with

disconecting neutral NA

Pin type

Fork type

Pin type

Fork type

Pin type

Fork type

Pin type

Fork type



188

1 Phase

6 Way

1 Phase

4 Way

Distribution Board DB-1MDistribution Board DB-1MDistribution Board DB-1MDistribution Board DB-1MDistribution Board DB-1M

DB-1M distribution system is suitable for circuit of AC 50/60 Hz, rated voltage up to AC 660V, rated current up to 125A of distribut-

ing control of modern building such as large office mansion, hotel, commerce department, industrial and mining enterprises and so

on. It can protect electric appliances from overload voltage & current. It also can short and frequent switch ON/OFF under normal

operating condition. It is one of the most reliable general distribution system in the world.

Application

Specifications

1Phase

3Phase

4Way

3Way

6Way

4Way

8Way

6Way

12Way

8Way 12Way 16Way

3 Phase

3 Way

Distribution Board DB-2CDistribution Board DB-2CDistribution Board DB-2CDistribution Board DB-2CDistribution Board DB-2C

4Way

4Way

6Way

6Way

9Way

8Way

12Way

10Way 12Way

DB-2C distribution board are designed to accept any combination of C50 single pole, double pole, triple pole MCB’s and RCBO’s.

All boards are fitted with phase, neutral and earthing busbars, associated MCB connection straps and phase identified barriers.

Both flush mounting and apparent mounting type are available.

Application

Specifications

1Phase

3Phase

SPN 6way SPN 12way TPN 4way



189

Distribution Board DB-4ADistribution Board DB-4ADistribution Board DB-4ADistribution Board DB-4ADistribution Board DB-4A

Gear Switch GS-MGear Switch GS-MGear Switch GS-MGear Switch GS-MGear Switch GS-M

63A 400A32A

MCCU 8wayMCCU 4way MCCU 6way

SPN 8way SPN 60way SPN 14way TPN 4way (cover) TPN 4way (base)

Consumer Unit MCCUConsumer Unit MCCUConsumer Unit MCCUConsumer Unit MCCUConsumer Unit MCCU



190

Distribution BoardDistribution BoardDistribution BoardDistribution BoardDistribution Board

D3 2P D3 6PD3 4PD3 1P

24Way

18Way

4Way

6Way12Way

36Way

D2-MG Available Way: 2, 4, 6, 8, 10, 12, 15, 18, 24, 36

D1-HPK Available Way: 2, 4, 6, 8, 10, 12, 15, 18, 24, 36

2WAY 6WAY4WAY 10WAY 12WAY

Junction BoxJunction BoxJunction BoxJunction BoxJunction Box

50 x 50 80 x 50 85 x 85 x 50 100 x 100 x 70 150 x 110 x 70 150 x 150 x 70

200 x 100 x 70 200 x 155 x 80 255 x 200 x 80 300 x 250 x 120 400 x 350 x 120



191

PG-N Cable Gland - ck-electrical.comck-electrical.com/document/ftproot/Electrical Accessory.pdf ·...

Documents

Transcript of PG-N Cable Gland - ck-electrical.comck-electrical.com/document/ftproot/Electrical Accessory.pdf ·...