Pg 01101007 e
-
Upload
german-toledo -
Category
Documents
-
view
222 -
download
0
Transcript of Pg 01101007 e
-
8/12/2019 Pg 01101007 e
1/32
Product Guide
UL 489 and UL 1077
DIN Rail MiniatureCircuit Breakers
-
8/12/2019 Pg 01101007 e
2/32EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Application Guidelines for UL 489Circuit Breakers and UL 1077Supplementary Protectors
UL 489 Circuit Breakers
Used for branch circuit protection, internal/external receptacles, external motors and HACR equipment(heating, air conditioning and refrigeration).
UL 1077 Supplementary Protectors
Used for overcurrent protection within appliances or electrical equipment, where branch circuit protection
is already provided or not required.
Note:UL 489 devices can be used in place of UL 1077; UL 1077 devices cannot be used in place of UL 489.
Electronics
Internal Receptacle
UL 489Breaker
UL 489BranchUL 1077
UL 1077
UL 1077
UL 489Branch
UL 489
Branch
UL 489Branch
ExternalReceptacle
ExternalMotor
ExternalMotor
MotorController
OtherSensitiveDevices
HACR
Example of UL 489 and UL 1077 Application
-
8/12/2019 Pg 01101007 e
3/32EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
UL 489 and UL 1077 DIN RailMiniature Circuit Breakers
Eaton offers a complete line of circuit breakers with its WMZT product line engineered for branch circuit protectionand its WMZS product line designed for supplementary protection. Optimum product quality, tested reliability andsafety stand for the best protection of personnel, installations and plant.
UL 489 DIN Rail Branch Circuit Breakers
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Selection
WMZT 10 kAIC at 480 / 277 Vac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WMZH 14 kAIC at 480 / 277 Vac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
WMZD 10 kAIC at 125 Vdc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
UL 1077 DIN Rail Supplementary Protectors
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Product Selection
WMZS B Curve (3 5X InCurrent Rating). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WMZS C Curve (5 10X InCurrent Rating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
WMZS D Curve (10 20X InCurrent Rating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
-
8/12/2019 Pg 01101007 e
4/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
PRODUCT OVERVIEW
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Optimum and Efficient Protection
Optimum product quality, tested reliability and safety stand forbest protection of personnel, installations and plant. Eatons WMZDIN rail mountable circuit breaker is designed for use in branchservice applications.
Powerful Offering for Machine and System Builders
The WMZ is available with C and D characteristics in accordancewith UL489, CSAC22.2 No.5; UL 1077, CSA C22.2 No.235and IEC 60947-2. These devices are CE marked.
Typical Applications
Feeder and Branch Circuit Protection
Convenience receptacle circuits (internal / external)
Motor control circuits
Load circuits leaving the equipment (external)
HACR equipment (heating, air conditioning, refrigeration)(internal / external)
PLC I/O points
Computers
Power supplies
Control instrumentation
Relays
UPS
Power conditioners
Features
Complete range of UL 489 listed DIN rail mounted miniaturecircuit breakers up to 40 ampere current rating
Standard ratings of 10 kAIC at 277 / 480 Vac
Select amperages available at 14 kAIC at 277 / 480 Vac and10 kAIC at 125 Vdc
Current limiting design provides fast short-circuit interruptionthat reduces the let-through energy, which can damagethe circuit
Suitable for branch circuit device protection
Thermal-magnetic overcurrent protection
Two levels of short-circuit protection,categorized by C and D curves
Trip-free design breaker can not be defeated by holding thehandle in the ON position
Captive screws cannot be lost
SWD (switching duty) suitable for switching fluorescent
lighting loads (In 20A) Fulfill UL 489, CSA C22.2 No.5 and also IEC 60947-2 Standard
For use in applications for which UL 1077 orCSA C22.2 No.235 are also allowed
Field installable shunt trip and auxiliary switch subsequentmounting
Separate version for ring-tongue connection (Type WMZT.T),terminal screws can be removed (on both sides)
Module width of only 17.7 mm (per pole)
Contact Position Indicator (red / green)
Easy installation on DIN rail
Possibility for sealing the toggle in ON or OFF position
WMZ Complies with the Latest National andInternational Standards
Standards Feeder and Branch Circuit Protection
UL 489
Standard for molded case circuit breakers(MCCB) for feeder and branch circuit protection.
Products meet the requirementsof the National Electrical Code(NEC).
CSA C22.2 No.5
Standard for molded case circuit breakers(MCCB) for feeder and branch circuit protection
(corresponds closely to UL 489 Standard).Products meet the requirements of theCanadian Electrical Code (CEC).
RoHS
These devices are RoHS compliant.
UL 489 DIN Rail Branch Circuit Breakers
WMZ Circuit Breakers
Product Overview
ProductOverview
-
8/12/2019 Pg 01101007 e
5/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
PRODUCT OVERVIEW
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Tripping Curves to Choose From
Eaton WMZ branch circuit breakers are available with C andD tripping characteristics.
C-curve devices are suitable for applications where mediumlevels of inrush current are expected. Applications include smalltransformers, lighting, pilot devices, control circuits and coils.C-curve devices provide a medium magnetic trip point.
D-curve devices are suitable for applications where high levels ofinrush current are expected. The high magnetic trip point preventsnuisance tripping in high inductive applications such as motors,transformers and power supplies.
Eaton WMZ devices are current limiting, which means theyinterrupt fault currents within one half cycle of the fault. Currentlimiting devices offer superior protection by reducing peaklet-through current and energy.
Catalog Numbering System
Device Printing on Front and Side
Installation options
These branch circuit breakers are available in two terminalconfigurations: standard box terminals that accept multipleconductors and ring-tongue terminals, ideally suited to demandingrequirements of the semi-conductor industry. All breakers mounton standard 35 mm DIN rail. Bus connectors and feeder terminalfacilitate mounting and wiring of multiple miniature circuit breakerarrays in control panel assemblies. These circuit breakers can alsobe reverse feed.
Tripping characteristicacc. to UL 489
conventional non-tripping
currentInt= 1.0 I
N(T=40)
conventional tripping currentIt= 1.35 I
N: t < 1 h (T=25)
2.0 IN: t = 12 120 s (T=25)
Instantaneous trippingacc. to IEC 60898-1
type C: 5 IN: t > 0.1 s
10 IN: t < 0.1 s
type D: 10 IN: t > 0.1 s
20 IN: t < 0.1 s
ConductorType
CalibrationTemperatureUL / CSA
Rated VoltageUL / CSA
Breaker StatusIndicator
Catalog Number
Rated Current
WMZ T 1 C 16 T
Breaker Family
WMZ = WMZ UL Circuit Breaker Number of Poles
1= 1-Pole2= 2-Pole3= 3-Pole
Terminal
T= Ring Terminals[blank]= Standard
Box Terminals
Breaker Type
T= 10 kAICH= 14 kAIC D= 10 kAIC/DC
Protective Curve
C= C Curve (5 10X In)
D= D Curve (10 20X In)
Ampere Rating
X0= 0.5 Amps01 = 1 AmpsX1= 1.5 Amps02= 2 Amps03= 3 Amps04= 4 Amps05= 5 Amps06= 6 Amps07= 7 Amps08= 8 Amps
10= 10 Amps13= 13 Amps15= 15 Amps16= 16 Amps20= 20 Amps25= 25 Amps30= 30 Amps32= 32 Amps40= 40 Amps
Limited curve and ampere offerings.
125 Vdc for 1-pole, 250 Vdc for 2-pole in series.
Not offered for Type WMZD.
-
8/12/2019 Pg 01101007 e
6/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
PRODUCT SELECTION
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
For our complete product offering, see the Distribution Products Catalog(CA08101001E).
WMZT Product Selection
UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02)as Branch Circuit Breakers
Interrupting capacity: 10 kA UL / CSA; 15 kA IEC 60947
Current limiting device
Optional connections for ring-tongue terminals
WMZT UL 489 Circuit Breakers 10 kAIC
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
C Curve (5 10X InCurrent Rating)
0.5
11.523
WMZT1CX0
WMZT1C01WMZT1CX1WMZT1C02WMZT1C03
WMZT2CX0
WMZT2C01WMZT2CX1WMZT2C02WMZT2C03
WMZT3CX0
WMZT3C01WMZT3CX1WMZT3C02WMZT3C03
45678
WMZT1C04WMZT1C05WMZT1C06WMZT1C07WMZT1C08
WMZT2C00WMZT2C05WMZT2C06WMZT2C07WMZT2C08
WMZT3C04WMZT3C05WMZT3C06WMZT3C07WMZT3C08
1013151620
WMZT1C10WMZT1C13WMZT1C15WMZT1C16WMZT1C20
WMZT2C10WMZT2C13WMZT2C15WMZT2C16WMZT2C20
WMZT3C10WMZT3C13WMZT3C15WMZT3C16WMZT3C20
25
303240
WMZT1C25
WMZT1C30WMZT1C32WMZT1C40
WMZT2C25
WMZT2C30WMZT2C32WMZT2C40
WMZT3C25
WMZT3C30WMZT3C32WMZT3C40
D Curve (10 20X InCurrent Rating)
0.511.523
WMZT1DX0WMZT1D01WMZT1DX1WMZT1D02WMZT1D03
WMZT2DX0WMZT2D01WMZT2DX1WMZT2D02WMZT2D03
WMZT3DX0WMZT3D01WMZT3DX1WMZT3D02WMZT3D03
45678
WMZT1D04WMZT1D05WMZT1D06WMZT1D07WMZT1D08
WMZT2D04WMZT2D05WMZT2D06WMZT2D07WMZT2D08
WMZT3D04WMZT3D05WMZT3D06WMZT3D07WMZT3D08
10
13151620
WMZT1D10
WMZT1D13WMZT1D15WMZT1D16WMZT1D20
WMZT2D10
WMZT2D13WMZT2D15WMZT2D16WMZT2D20
WMZT3D10
WMZT3D13WMZT3D15WMZT3D16WMZT3D20
25303240
WMZT1D25WMZT1D30WMZT1D32WMZT1D40
WMZT2D25WMZT2D30WMZT2D32WMZT2D40
WMZT3D25WMZT3D30WMZT3D32WMZT3D40
WMZT UL 489 Circuit Breakers withRing-Tongue Terminals 10 kAIC
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
C Curve with Ring-Tongue Terminals (5 10X InCurrent Rating)
0.5
11.523
WMZT1CX0T
WMZT1C01TWMZT1CX1TWMZT1C02TWMZT1C03T
WMZT2CX0T
WMZT2C01TWMZT2CX1TWMZT2C02TWMZT2C03T
WMZT3CX0T
WMZT3C01TWMZT3CX1TWMZT3C02TWMZT3C03T
45678
WMZT1C04TWMZT1C05TWMZT1C06TWMZT1C07TWMZT1C08T
WMZT2C04TWMZT2C05TWMZT2C06TWMZT2C07TWMZT2C08T
WMZT3C04TWMZT3C05TWMZT3C06TWMZT3C07TWMZT3C08T
1013151620
WMZT1C10TWMZT1C13TWMZT1C15TWMZT1C16TWMZT1C20T
WMZT2C10TWMZT2C13TWMZT2C15TWMZT2C16TWMZT2C20T
WMZT3C10TWMZT3C13TWMZT3C15TWMZT3C16TWMZT3C20T
25
303240
WMZT1C25T
WMZT1C30TWMZT1C32TWMZT1C40T
WMZT2C25T
WMZT2C30TWMZT2C32TWMZT2C40T
WMZT3C25T
WMZT3C30TWMZT3C32TWMZT3C40T
D Curve with Ring-Tongue Terminals (10 20X InCurrent Rating)
0.511.523
WMZT1DX0TWMZT1D01TWMZT1DX1TWMZT1D02TWMZT1D03T
WMZT2DX0TWMZT2D01TWMZT2DX1TWMZT2D02TWMZT2D03T
WMZT3DX0TWMZT3D01TWMZT3DX1TWMZT3D02TWMZT3D03T
45678
WMZT1D04TWMZT1D05TWMZT1D06TWMZT1D07TWMZT1D08T
WMZT2D04TWMZT2D05TWMZT2D06TWMZT2D07TWMZT2D08T
WMZT3D04TWMZT3D05TWMZT3D06TWMZT3D07TWMZT3D08T
10
13151620
WMZT1D10T
WMZT1D13TWMZT1D15TWMZT1D16TWMZT1D20T
WMZT2D10T
WMZT2D13TWMZT2D15TWMZT2D16TWMZT2D20T
WMZT3D10T
WMZT3D13TWMZT3D15TWMZT3D16TWMZT3D20T
25303240
WMZT1D25TWMZT1D30TWMZT1D32TWMZT1D40T
WMZT2D25TWMZT2D30TWMZT2D32TWMZT2D40T
WMZT3D25TWMZT3D30TWMZT3D32TWMZT3D40T
Product Selection
ProductSelection
-
8/12/2019 Pg 01101007 e
7/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
PRODUCT SELECTION
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
WMZH Product Selection
UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02)as Branch Circuit Breakers
Interrupting capacity: 14 kA UL / CSA; 15 kA IEC 60947
WMZH UL 489 Circuit Breakers 14 kAIC
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
C Curve (5 10X InCurrent Rating)
15162025
WMZH1C15WMZH1C16WMZH1C20WMZH1C25
WMZH2C15WMZH2C16WMZH2C20WMZH2C25
WMZH3C15WMZH3C16WMZH3C20WMZH3C25
D Curve (10 20X InCurrent Rating)
13151620
WMZH1D13WMZH1D15WMZH1D16WMZH1D20
WMZH2D13WMZH2D15WMZH2D16WMZH2D20
WMZH3D13WMZH3D15WMZH3D16WMZH3D20
WMZD Product Selection
UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02)as Branch Circuit Breakers
Interrupting capacity: 10 kA at 125 Vdc UL / CSA
125 Vdc for 1-pole, 250 Vdc for 2-pole in series
Current limiting device
Current limiting device
Optional connections for ring-tongue terminals
WMZH UL 489 Circuit Breakers with Ring-Tongue Terminals
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
C Curve (5 10X InCurrent Rating)
15162025
WMZH1C15TWMZH1C16TWMZH1C20TWMZH1C25T
WMZH2C15TWMZH2C16TWMZH2C20TWMZH2C25T
WMZH3C15TWMZH3C16TWMZH3C20TWMZH3C25T
D Curve (10 20X InCurrent Rating)
13151620
WMZH1D13TWMZH1D15TWMZH1D16TWMZH1D20T
WMZH2D13TWMZH2D15TWMZH2D16TWMZH2D20T
WMZH3D13TWMZH3D15TWMZH3D16TWMZH3D20T
WMZD UL 489 Circuit Breakers 10 kAIC at 125 Vdc per pole
Amperes
1-Pole 2-Pole
Catalog Number Catalog Number
C Curve (5 10X InCurrent Rating)
2345
WMZD1C02WMZD1C03WMZD1C04WMZD1C05
WMZD2C02WMZD2C03WMZD2C04WMZD2C05
678
10
WMZD1C06WMZD1C07WMZD1C08
WMZD1C10
WMZD2C06WMZD2C07WMZD2C08
WMZD2C10
13151620
WMZD1C13WMZD1C15WMZD1C16WMZD1C20
WMZD2C13WMZD2C15WMZD2C16WMZD2C20
25303240
WMZD1C25WMZD1C30WMZD1C32WMZD1C40
WMZD2C25WMZD2C30WMZD2C32WMZD2C40
For our complete product offering, see the Distribution Products Catalog(CA08101001E).
-
8/12/2019 Pg 01101007 e
8/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
ACCESSORIES
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
WMZ UL 489 Breakers
Accessory / Description Catalog Number
2-Pole Contact or Auxiliary Contact/Trip Indicating Contact WMZSAUXTRIP
Auxiliary Contact WMZTAUX
Shunt Trip 110 415 VacShunt Trip 12 110 Vac
WMZTST415WMZTST110
Padlock Hasp WMZPLK
Bus Bar 1-Pole 6 TerminalsBus Bar 1-Pole 12 TerminalsBus Bar 1-Pole 18 TerminalsBus Bar 2-Pole 6 TerminalsBus Bar 2-Pole 12 TerminalsBus Bar 2-Pole 18 TerminalsBus Bar 3-Pole 6 TerminalsBus Bar 3-Pole 12 TerminalsBus Bar 3-Pole 18 Terminals
WMZT1P6TWMZT1P12TWMZT1P18TWMZT2P6TWMZT2P12TWMZT2P18TWMZT3P6TWMZT3P12TWMZT3P18T
3-Pole Bus Bar Shroud WMZT3PSHROUD
Extension Terminal 35 mm (2 14 AWG) WMZT35EXT
Bus Connector Conductors up to 50 mm2
(~1/0 AWG) WMZTBCON
Contact sales office for availability.
Tripping Signal Switch WMZSAUXTRIP, WMZTAUX
Design according to IEC / EN 60947-5-1, IEC / EN 62019
Field installable
The specified minimum voltages are per contact take into
account particularly in case of series connection Self-cleaning contacts
Contact material and design particularly suitable forextra low voltage
WMZSAUXTRIP: the function of one of the two change-overcontacts can be switched from auxiliary switch to trippingsignal switch
Tripping signal contact transmits message of electric tripping,not mechanical switch-off
Test key for contact function electrical tripping
WMZTAUX: will allow for > 480Y / 277 Vac rating
Connection Diagram
WMZSAUXTRIP
21
4.11
1.11
1.14
1.12
4.12/4.14
4.14/4.12
13
2214
Same Polarity
WMZTAUX
Accessories
Dimensions
Miniature Circuit Breakers
WMZ
4.13
(105.0)
1-Pole 2-Pole 3-Pole
.70
(17.7)
.70
(17.7)
1.39
(35.3)
2.09
(53.1)
.70
(17.7)
.70
(17.7)
4.13
(105.0)
4.13
(105.0)
1.17
(29.7)39
1.42
(36.1)
Accessories
-
8/12/2019 Pg 01101007 e
9/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Dimensions (mm)
WMZT_ _ 18T WMZT35EXT
WMZT_ _ 6T WMZT_ _ 12T WMZT3PSHROUD
WMZT35EXT
Description UL 489 IEC / EN 60947-2
# 2 14 AWG
60/75C Cu
2.5 35 mm2
60/75C Cu0.56 in 14 mm
Tested according to Tightening Torque ofTerminal Screws
UL 486A # 14 AWG 2.3 Nm
UL 486B # 8 12 AWG 2.8 Nm
UL 486E # 6 1 AWG 4 Nm
Lockout Attachment
WMZPLK
Technical Data
-
8/12/2019 Pg 01101007 e
10/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Miniature Circuit Breakers WMZ
Connection Diagrams
Miniature Circuit Breakers WMZ
Description
Electrical
Design According to UL 489, CSA C22.2 No.5, IEC 60947-2
Rated Voltage WMZT UL / CSA
UL / CSA UL / CSA IEC 947-2
10 kAIC at 277 / 480V from 0.5A to 32A
10 kAIC at 240 Vac for 40A10 kAIC at 48 Vdc per pole15 kAIC at 240 / 415 Vac
Rated Voltage WMZD UL / CSA 10 kAIC at 125 Vdc per pole (2 poles max)
10 kAIC at 250 Vdc with 2 poles connected in series
Rated Voltage WMZH UL / CSA IEC 947-2
14 kAIC at 277 / 480V at listed amperages15 kAIC at 240 / 415 Vac
Rated Frequency 50 / 60 Hz
Rated Breaking Capacity WMZT UL / CSA IEC 947-2
10 kA15 kA
Rated Breaking Capacity WMZH UL / CSA IEC 947-2
14 kA15 kA
Characteristic C, D
Endurance 20,000 Operations
Line Voltage Connection Suitable for Reverse Feed
Mechanical
Frame Size 45 mm
Device Height 105 mm
Device Width 17.7 mm per Pole
Mounting Quick Fastening with Two Lock-In Positionson IEC / EN 60715
Upper and Lower Terminals Open Mouth / Lift Terminals
Terminal Capacity 1 Wire2 Wires
AWG 18 6AWG 18 10
Terminal Fastening Torque AWG 18-21: 21 lb- inAWG 10-8: 25 lb-inAWG 6: 36 lb-in
Mounting Independent of Position
Calibration TemperatureUL 489, CSA C22.2 No.5IEC 60947-2
40C30C
2-Pole 3-Pole1-Pole
Dimensions (mm)
Power Loss at ln
Characteristic C Characteristic D
In[A]
1-Pole 2-Pole 3-Pole 1-Pole 2-Pole 3-Pole
P [W] P [W] P [W] P [W] P [W] P [W
0.511.52
1.61.11.31.4
3.22.22.62.8
4.73.43.94.3
1.60.81.01.0
3.21.52.12.1
4.82.33.13.1
3456
1.21.41.91.2
2.42.93.72.3
3.64.35.63.5
1.21.41.51.2
2.42.92.92.3
3.64.34.43.5
78
1013
1.41.41.82.4
2.82.83.64.7
4.34.25.37.1
1.41.21.52.0
2.82.43.04.1
4.33.74.56.1
15162025
1.92.12.93.1
3.84.35.86.2
5.66.48.79.3
1.51.71.82.6
3.13.53.75.1
4.65.25.57.7
30323540
3.03.43.74.0
6.06.87.48.1
9.010.211.012.1
2.73.13.83.9
5.46.27.67.8
8.19.3
11.311.6
17.7
105
5.5
45
10
44
60
Technical Data
TechnicalD
ata
-
8/12/2019 Pg 01101007 e
11/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Let-Through Energy
Characteristic C (0.5 32A), 277V
Characteristic D (0.5 32A), 277V
Characteristic C (40A), 240V
Characteristic D (40A), 240V
-
8/12/2019 Pg 01101007 e
12/320
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Influence of Ambient Temperature T on Load Carrying Capacity
Device MarketCurrent RatingI
n(A) at 40C
In(A) at Higher Ambient Temperature
15C 20C 25C 30C 40C 50C 55C 60C
0.5
1.01.52.0
0.6
1.11.72.2
0.5
1.11.62.2
0.5
1.11.62.1
0.5
1.01.62.1
0.5
1.01.52.0
0.5
1.01.41.9
0.5
0.91.41.9
0.5
0.91.41.8
3.04.05.06.0
3.34.45.56.6
3.24.35.46.5
3.24.25.36.4
3.14.25.26.2
3.04.05.06.0
2.93.84.85.8
2.93.84.75.6
2.83.74.65.5
7.08.0
10.013.0
7.78.8
11.014.3
7.68.6
10.814.0
7.48.5
10.613.8
7.38.3
10.413.5
7.08.0
10.013.0
6.77.79.6
12.5
6.67.59.4
12.5
6.47.49.2
12.0
15.016.020.025.0
16.517.622.027.5
16.217.321.627.0
15.917.021.226.5
15.616.620.826.0
15.016.020.025.0
14.415.419.224.0
14.115.018.823.3
13.814.718.423.0
30.032.040.0
33.035.244.0
32.434.643.2
31.833.942.4
31.233.341.6
30.032.040.0
28.830.738.4
28.230.137.6
27.629.436.8
Ambient Temperature T [C]Maximum Load I
Lat ambient temperature T: I
L(T) = I
NK
T(T)
LoadFa
ctorKT[I/IN]
TechnicalD
ata
-
8/12/2019 Pg 01101007 e
13/32
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Accessories
Description WMZSAUXTRIP WMZTAUX
Electrical
Contact Function 2CO 1NO + 1NC
Rated Voltage 230V 250V
Frequency 50 / 60 Hz 50 / 60 Hz
Rated Current 2A 6A
Rated Thermal Current Ith
2A 6A
Utilization Category AC13Rated Operational Current I
e3A / 250 Vac 3A / 250 Vac
Utilization Category AC15Rated Operational Current I
e2A / 250 Vac 2A / 250 Vac
Utilization Category DC12Rated Operational Current I
e0.5A / 110 Vdc 0.5A / 110 Vdc
0.25A / 220 Vdc
Rated Insulation Voltage UI
250 Vac 250 Vac
Minimum Operational Voltage per Contact Umin
5 Vdc 5 Vdc
Minimum Operational Current Imin
10 mA dc 10 mA ac / dc
Rated Peak Withstand Voltage Uimp
(1.2 / 50) 2.5 kV 4 kV
Conditional Short Circuit Current Ikwith Back-Up Fuse 6A 1 kA 1 kA
Max. Back-Up Fuse, Overload and Short Circuit 6A gL
Mechanical
Tripping Indicator Electrical Tripping Blue / White
Frame Size 45 mm 45 mm
Device Height 80 mm 80 mm
Device Width 8.8 mm (0.5MU) 8.8 mm (0.5MU)
Mounting Onto Switching Dev.
Degree of Protection, Built-In IP40 IP40
Terminal Protection Finger and Hand Touch SafeAccording to BGV A3, VE-EN 6
Finger and Hand Touch SafeAccording to BGV A3, VE-EN 6
Terminals Lift Terminals Lift Terminals
Terminal Capacity 20 14 AWG 0.5 2.5 mm2
Terminal Screws M3 (Posidrive Z0) M3 (Posidrive Z0)
Fastening Torque of Terminal Screws 7 lb-in Max. 1.2 Nm
-
8/12/2019 Pg 01101007 e
14/322
UL 489 DIN Rail Branch Circuit BreakersWMZ Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Shunt Trip Release WMZTST
Remote release for subsequent mounting onto WMZT
Additional installation of standard auxiliary switch is possible
Position indicator red green
Connection Diagram
Shunt Trip Release WMZTST
Description WMZTST110 WMZTST415
Electrical
Can be Mounted Onto WMZT / WMZH / WMZD WMZT / WMZH / WMZD
Operational VoltageRange
12 110 Vac12 60 Vdc
110 415 Vac110 230 Vdc
Frequency 50 / 60 Hz 50 / 60 Hz
Mechanical
Frame Size 45 mm 45 mm
Device Height 105 mm 105 mm
Device Width 17.5 mm 17.5 mm
Mounting Quick Fastening with 2 Lock-In Positions onEN 50022
Degree of Protection,
Built-In
IP40 IP40
Terminal Protection Finger and Hand Touch Safe According to BGV A3,VE-EN 6
Terminals Open Mouthed / Lift Open Mouthed / Lift
Terminal Capacity 1 and2 Wires
18 10 AWG 18 10 AWG
Bus Bar Block UL 489 (Pin)
Tested according to UL 489
Do not cut
Extension terminal 35 mm2WMZT35EXT for
copper conductors For covering of not used pins use bus bar tag
shrouds WMZT3PSHROUD
Connection Diagram
Bus Bar Block UL 489 (Pin)
Description UL 489 IEC / EN 60947-2
Electrical
Rated OperationalVoltage
480 / 277 Vac96 Vdc
Rated Frequency 50 / 60 Hz
Rated Voltage 690 Vac
Overvoltage Category III
Rated Impulse WithstandVoltage U
imp
9.5 kV
Rated Current 80A 80A
Rated Conditional Short-Circuit Current ac with350A gG
15 kA
Short-Circuit Current 10 kA
Mechanical
Bus Bar Cross Section 16 mm2Cu
Flame Class Accordingto UL 94
V0
Pollution Degree 2
Comparative TrackingIndex
CTI 600
Minimum Clearance(intern / extern)
> 9.5 / 25.4 mm
Minimum CreepageDistance (intern / extern)
> 12.7 / 50.8 mm
Resistance to Climatic
Conditions
According to
DIN / EN60068
WMZT1PWMZT2PWMZT3P
TechnicalD
ata
-
8/12/2019 Pg 01101007 e
15/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
PRODUCT OVERVIEW
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Optimum and Efficient Protection
Optimum product quality, tested reliability and safety stand forbest protection of personnel, installations and plant. EatonsWMZS DIN rail mountable circuit breaker is designed for use in
control panel applications.
Powerful Offering for Machine and System Builders
The WMZS is available with B, C and D characteristics inaccordance with UL 1077, CSA C22.2 No.235 and IEC 60947-2.These devices are CE marked.
Typical Applications
Supplementary protection
Control circuits
Lighting
Business equipment
Appliances
Features
Complete range of UL 1077 listed DIN rail mounted miniaturecircuit breakers up to 63 ampere current rating
Standard ratings of 10 kAIC at 277 / 480 Vac
Current limiting design provides fast short-circuit interruptionthat reduces the let-through energy, which can damagethe circuit
Suitable for supplementary protection
Thermal-magnetic overcurrent protection
Three levels of short-circuit protection,categorized by B, C and D curves
Trip-free design breaker can not be defeated by holding thehandle in the ON position
Captive screws cannot be lost
Fulfill UL 1077, CSA C22.2 No.235 and also IEC 60947-2Standard
Field-installable shunt trip and auxiliary switch subsequent
mounting Module width of only 17.5 mm (per pole)
Contact Position Indicator (red / green)
Easy installation on DIN rail
Possibility for sealing the toggle in ON or OFF position
WMZS Complies with the Latest National andInternational Standards
Standards Supplementary Protection
UL 1077, CSA C22.2 No. 235
Apply to supplementary protectors intended for
use as overcurrent, or overvoltage orundervoltage protection within an appliance orother electrical equipment where branch circuitprotection is already provided, or is not required.
RoHS
These devices are RoHS compliant.
UL 1077 DIN Rail Supplementary Protectors
WMZS Circuit Breakers
Product Overview
-
8/12/2019 Pg 01101007 e
16/324
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
PRODUCT OVERVIEW
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Discover These Advanced Features Three Tripping Curves to Choose From
Eaton WMZS Supplementary Protectors are available with threedifferent tripping characteristics, including Type B, C and D.Definitions for each trip curve are contained on the ordering pagesand can be used to determine the optimal characteristic for your
application. For example, low level short-circuit faults in controlwiring, such as PLCs, are best protected by devices with Type Btrip characteristics (3 to 5X continuous rating of the device ( I
n).
Even though not required by NEC or CEC for SupplementaryProtectors, Eatons WMZS devices are current limiting, whichmeans that they interrupt fault currents within one half cycle.Current limiting devices offer superior protection by reducingpeak let-through current and energy.
0.0005
t[sec]
NI / I
7200
3600
1200
600
300
120
60
30
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.005
0.01
0.002
0.001
504030201510987654321
95
4
3
3
2
DCB
7
86
1
Time-current characteristic acc. to UL 1077
conventionalnon-tripping currentInt= 1.13 I
N: t > 1 h
conventional trippingcurrent
It= 1.45 IN: t < 1 h
2.55 IN:
t = 1 60 s (IN
< 32A)t = 1 120 s (I
N< 32A)
Type B: 3 IN: t > 0.1 s
Type B: 5 IN
: t < 0.1 s
Type C: 5 IN: t > 0.1 s
Type C: 10 IN: t < 0.1 s
Type D: 10 IN: t > 0.1 s
Type D: 20 IN: t < 0.1 s
Catalog Numbering System
WMZS 1 B 10
Breaker Family
WMZS = Supplementary Protector Number of Poles
1= 1-Pole2= 2-Pole3= 3-Pole
Protective Curve
B= B Curve (3 5X In)
C= C Curve (5 10X In)
D= D Curve (10 20X In)
Ampere Rating
00= 0.5 Amps01 = 1 Amps02= 2 Amps03= 3 Amps04= 4 Amps05= 5 Amps06= 6 Amps
07= 7 Amps08= 8 Amps10= 10 Amps13= 13 Amps15= 15 Amps16= 16 Amps20= 20 Amps
25= 25 Amps30= 30 Amps32= 32 Amps40= 40 Amps50= 50 Amps63= 63 Amps
Captive posidrive terminalscrews with finger andback-of-hand protection
(IP20)
Trip-free design; breakercannot be defeated byholding the handle in theON position
Breaker informationprinted on the front ofthe device for quick iden-tification
Breakers install onstandard DIN rail
Available in 1-, 2- and3-pole models
Color-coded indicatorprovides breaker statusfor easy troubleshooting
ProductOverview
-
8/12/2019 Pg 01101007 e
17/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
PRODUCT SELECTION
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
For our complete product offering, see the Distribution Products Catalog(CA08101001E).
WMZS Product Selection B Curve (3 5X I
nCurrent Rating)
Designed for resistive or slightly inductive loads
Response time of instantaneous trip: 3 5X Incurrent rating
UL Recognized and CSA Certified as Supplementary Protectors For international and domestic use (conform to IEC 60947-2)
Suitable for applications where protection against low-level short-circuit faults in control wiring is desired. Instantaneous trip is3 5X continuous rating of device (I
n). Applications include PLC
wiring, business equipment, lighting, appliances and somemotors. Low magnetic trip point.
B Curve (3 5X InCurrent Rating)
Designed for Resistive or Slightly Inductive Loads
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
678
WMZS1B06WMZS1B07WMZS1B08
WMZS2B06WMZS2B07WMZS2B08
WMZS3B06WMZS3B07WMZS3B08
101315
WMZS1B10WMZS1B13WMZS1B15
WMZS2B10WMZS2B13WMZS2B15
WMZS3B10WMZS3B13WMZS3B15
1620
25
WMZS1B16WMZS1B20
WMZS1B25
WMZS2B16WMZS2B20
WMZS2B25
WMZS3B16WMZS3B20
WMZS3B25
303240
WMZS1B30WMZS1B32WMZS1B40
WMZS2B30WMZS2B32WMZS2B40
WMZS3B30WMZS3B32WMZS3B40
5063
WMZS1B50WMZS1B63
WMZS2B50WMZS2B63
WMZS3B50WMZS3B63
In North America, these switches are UL Recognized and CSA Certified as SupplementaryProtection devices. Per the intent of NEC (National Electrical Code), Article 240, and CEC(Canadian Electrical Code), Part 1 C22.1, supplementary breakers cannot be used as asubstitute for the branch circuit protective device. They can be used to provide overcurrentprotection within an appliance or other electrical equipment where branch circuitovercurrent protection is already provided, or is not required.
0.0005
t[sec]
NI / I
7200
1.
13
1.
45
3600
1200
600
300
120
60
30
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.005
0.01
0.002
0.001
504030201510987654321
73
2
1
1
DCB
5
64
Specified non-tripping
current
INT
= 1.13 x INfor t > 1 h
Specified tripping currentIT= 1.45 x I
Nfor t < 1 h
2.55 IN:
t = 1 60 s (IN
< 32A)t = 1 120 s (I
N> 32A)
Type B: 3 x IN: t > 0.1 s
Type B: 5 x IN: t < 0.1 s
Type C: 5 x IN: t > 0.1 s
Type C: 10 x IN: t < 0.1 s
Type D: 10 x IN: t > 0.1 s
Type D: 20 x IN: t < 0.1 s
Product Selection
-
8/12/2019 Pg 01101007 e
18/326
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
PRODUCT SELECTION
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
WMZS Product Selection C Curve (5 10X I
nCurrent Rating)
Designed for inductive loads
Response time of instantaneous trip: 5 10X Incurrent rating
UL Recognized and CSA Certified as Supplementary Protectors
For international and domestic use (conform to IEC 60947-2)
Suitable for applications where medium levels of inrush currentare expected. Instantaneous trip is 5 10X rating of device (I
n).
Applications include small transformers, lighting, pilot devices,control circuits, and coils. Medium magnetic trip point.
C Curve (5 10X InCurrent Rating)
Designed for Inductive Loads
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
0.512
WMZS1C00WMZS1C01WMZS1C02
WMZS2C00WMZS2C01WMZS2C02
WMZS3C00WMZS3C01WMZS3C02
345
WMZS1C03WMZS1C04WMZS1C05
WMZS2C03WMZS2C04WMZS2C05
WMZS3C03WMZS3C04WMZS3C05
678
WMZS1C06WMZS1C07WMZS1C08
WMZS2C06WMZS2C07WMZS2C08
WMZS3C06WMZS3C07WMZS3C08
101315
WMZS1C10WMZS1C13WMZS1C15
WMZS2C10WMZS2C13WMZS2C15
WMZS3C10WMZS3C13WMZS3C15
162025
WMZS1C16WMZS1C20WMZS1C25
WMZS2C16WMZS2C20WMZS2C25
WMZS3C16WMZS3C20WMZS3C25
303240
WMZS1C30WMZS1C32WMZS1C40
WMZS2C30WMZS2C32WMZS2C40
WMZS3C30WMZS3C32WMZS3C40
5063
WMZS1C50WMZS1C63
WMZS2C50WMZS2C63
WMZS3C50WMZS3C63
In North America, these switches are UL Recognized and CSA Certified as SupplementaryProtection devices. Per the intent of NEC (National Electrical Code), Article 240, and CEC(Canadian Electrical Code), Part 1 C22.1, supplementary breakers cannot be used as asubstitute for the branch circuit protective device. They can be used to provide overcurrent
protection within an appliance or other electrical equipment where branch circuitovercurrent protection is already provided, or is not required.
0.0005
t[sec]
NI / I
7200
1.1
3
1.4
5
3600
1200
600
300
120
60
30
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.005
0.01
0.002
0.001
504030201510987654321
73
2
1
1
DCB
5
64
Specified non-tripping
current
INT
= 1.13 x INfor t > 1 h
Specified tripping currentIT= 1.45 x I
Nfor t < 1 h
2.55 IN:
t = 1 60 s (IN
< 32A)t = 1 120 s (I
N> 32A)
Type B: 3 x IN: t > 0.1 s
Type B: 5 x IN: t < 0.1 s
Type C: 5 x IN: t > 0.1 s
Type C: 10 x IN: t < 0.1 s
Type D: 10 x IN: t > 0.1 s
Type D: 20 x IN: t < 0.1 s
For our complete product offering, see the Distribution Products Catalog(CA08101001E).
ProductSelection
-
8/12/2019 Pg 01101007 e
19/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
PRODUCT SELECTION
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
WMZS Product Selection D Curve (10 20X I
nCurrent Rating)
Designed for highly inductive loads
Response time of instantaneous trip: 10 20X Incurrent rating
UL Recognized and CSA Certified as Supplementary Protectors For international and domestic use (conform to IEC 60947-2)
Suitable for applications where high levels of inrush current areexpected. Instantaneous trip is 10 20X rating of device (I
n).
The high magnetic trip point prevents nuisance tripping in highinductive applications such as motors, transformers andpower supplies.
D Curve (10 20X InCurrent Rating)
Designed for Inductive Loads
Amperes
1-Pole 2-Pole 3-Pole
Catalog Number Catalog Number Catalog Number
0.512
WMZS1D00WMZS1D01WMZS1D02
WMZS2D00WMZS2D01WMZS2D02
WMZS3D00WMZS3D01WMZS3D02
345
WMZS1D03WMZS1D04WMZS1D05
WMZS2D03WMZS2D04WMZS2D05
WMZS3D03WMZS3D04WMZS3D05
67
8
WMZS1D06WMZS1D07
WMZS1D08
WMZS2D06WMZS2D07
WMZS2D08
WMZS3D06WMZS3D07
WMZS3D08
101315
WMZS1D10WMZS1D13WMZS1D15
WMZS2D10WMZS2D13WMZS2D15
WMZS3D10WMZS3D13WMZS3D15
162025
WMZS1D16WMZS1D20WMZS1D25
WMZS2D16WMZS2D20WMZS2D25
WMZS3D16WMZS3D20WMZS3D25
303240
WMZS1D30WMZS1D32WMZS1D40
WMZS2D30WMZS2D32WMZS2D40
WMZS3D30WMZS3D32WMZS3D40
In North America, these switches are UL Recognized and CSA Certified as SupplementaryProtection devices. Per the intent of NEC (National Electrical Code), Article 240, and CEC(Canadian Electrical Code), Part 1 C22.1, supplementary breakers cannot be used as asubstitute for the branch circuit protective device. They can be used to provide overcurrentprotection within an appliance or other electrical equipment where branch circuit
overcurrent protection is already provided, or is not required.
0.0005
t[sec]
NI / I
7200
1.
13
1.
45
3600
1200
600
300
120
60
30
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.005
0.01
0.002
0.001
504030201510987654321
73
2
1
1
DCB
5
64
Specified non-tripping
current
INT
= 1.13 x INfor t > 1 h
Specified tripping currentIT= 1.45 x I
Nfor t < 1 h
2.55 IN:
t = 1 60 s (IN
< 32A)t = 1 120 s (I
N> 32A)
Type B: 3 x IN: t > 0.1 s
Type B: 5 x IN: t < 0.1 s
Type C: 5 x IN: t > 0.1 s
Type C: 10 x IN: t < 0.1 s
Type D: 10 x IN: t > 0.1 s
Type D: 20 x IN: t < 0.1 s
-
8/12/2019 Pg 01101007 e
20/328
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
ACCESSORIES
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Pin Type Incoming Supply Terminals
Accessories Description InstallationCatalogNumber
Incoming Terminal
AccommodatesConductorsfrom 6 35 mm2/#10 2 AWG
4 5.5 Nm/35 50 lb-in
Finger-SafeConnection
WMZS35EXT
Protective Accessories
Accessories DescriptionCatalogNumber
Bus Bar Terminal CoverFor Covering UnusedTerminals
WMZSBBTC
Padlock Hasp
Prevents Reactivationof the Device DuringMaintenance
Holds One Padlock
WMZPLK
Bus Incoming Supply Terminals
Accessories Descript ion Installat ionCatalogNumber
Incoming Terminal
50 mm2
#14 1 AWG 75 Deg Wire 115 A/Y, 480V UL 160 A/Y 690V IEC
WMZSBCONA
Bus Bar End Cap
Accessories Description PolesCatalogNumber
Fork Connector
Install AfterCutting Bus Bar
Protects End ofBus Bar
2 & 3 WMZS3CAP
1 WMZS1CAP
Accessories
Accessories
-
8/12/2019 Pg 01101007 e
21/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Technical Data
Description B Curve C Curve D Curve
Electrical
Approvals UR (UL 1077), CSA (CSA 22.2 No. 235), CE
Standards IEC / EN 60947-2Short-Circuit Trip Response 3 x 5 In
5 x 10 In
10 x 20 In
Supplementary Protectors UL / CSA
Current Range 6 63A 0.5 63A 0.5 40A
Maximum Voltage Ratings UL / CSA 1-Pole
2-, 3-Pole 2 Poles in Series
277 Vac48 Vdc480Y / 277 Vac96 Vdc
277 Vac48 Vdc480Y / 277 Vac96 Vdc
277 Vac48 Vdc480Y / 277 Vac96 Vdc
Thermal Tripping Characteristics Single-Pole Multi-Pole
1.35 x In@ 40C
1.45 x In@ 40C
1.35 x In@ 40C
1.45 x In@ 40C
1.35 x In@ 40C
1.45 x In@ 40C
Short-Circuit Ratings (at Max. Voltage) 1-Pole 2-, 3-Pole
1-Pole 2 Poles in Series
10 kA (5 kA for 40 63A Device)10 kA (5 kA for 40 63A Device)
10 kA @ 48 Vdc10 kA @ 96 Vdc
10 kA (5 kA for 40 63A Device)10 kA (5 kA for 40 63A Device)
10 kA @ 48 Vdc10 kA @ 96 Vdc
5 kA5 kA
10 kA @ 48 Vdc10 kA @ 96 Vdc
Miniature Circuit Breaker IEC
Current Range 6 63A 0.5 63A 0.5 40A
Maximum Voltage Ratings IEC 60947-2 1-Pole
2-, 3-Pole
230 Vac48 Vdc230/400 Vac
230 Vac48 Vdc230/400 Vac
230 Vac48 Vdc230/400 Vac
Maximum Voltage Ratings IEC 60898 1-Pole
2-, 3-Pole
240 Vac48 Vdc240/415 Vac
240 Vac48 Vdc240/415 Vac
240 Vac48 Vdc240/415 Vac
Thermal Tripping Characteristics Single-Pole Multi-pole
> 1 Hour @ 1.05 x In
< 1 Hour @ 1.3 x In
> 1 Hour @ 1.05 x In
< 1 Hour @ 1.3 x In
> 1 Hour @ 1.05 x In
< 1 Hour @ 1.3 x In
Interrupt Ratings (at Max. Voltage) IEC 60947-2 IEC 60898Operational Switching CapacityMax. Back-Up Fuse [gL/gG]Rated Impulse WithstandU
imp
Rated Insulation VoltageUi
15 kA10 kA7.5 kA125A4000 Vac440 Vac
15 kA10 kA7.5 kA125A4000 Vac440 Vac
15 kA10 kA7.5 kA125A4000 Vac440 Vac
Environmental / General
Selectivity ClassLifespan (Operations)Shock (IEC 68-2-22)Operating Temperature RangeShipment & Short-Term StorageHousing Material
3> 10000 (1 operation = ON/OFF)10g 120 ms+23 to +104F (-5 to +40C)-40 to +185F (-40 to +85C)Nylon
3> 10000 (1 operation = ON/OFF)10g 120 ms+23 to +104F (-5 to +40C)-40 to +185F (-40 to +85C)Nylon
3> 10000 (1 operation = ON/OFF)10g 120 ms+23 to +104F (-5 to +40C)-40 to +185F (-40 to +85C)Nylon
Mechanical
Standard Front DimensionDevice HeightTerminal ProtectionMounting Width per Pole
80 mmFinger and Back-of-Hand Proof to IEC 53617.5 mm
80 mmFinger and Back-of-Hand Proof to IEC 53617.5 mm
80 mmFinger and Back-of-Hand Proof to IEC 53617.5 mm
MountingDegree of ProtectionTerminals Top and BottomSupply Connection
IEC / EN 60715 Top-Hat RailIP20Twin-Purpose TerminalsLine or Load Side
IEC / EN 60715 Top-Hat RailIP20Twin-Purpose TerminalsLine or Load Side
IEC / EN 60715 Top-Hat RailIP20Twin-Purpose TerminalsLine or Load Side
Terminal Capacity [mm2]TorqueImperial Torque
Thickness of Bus Bar MaterialMounting Position
1 x 25 (AWG 4 18) / 2 x 10 (AWG 8 18)2.4 Nm21 lb-in (AWG 18 12), 25 lb-in
(AWG 10 8), 36 lb-in (AWG 6 4)0.8 2 mmAs Required
1 x 25 (AWG 4 18) / 2 x 10 (AWG 8 18)2.4 Nm21 lb-in (AWG 18 12), 25 lb-in
(AWG 10 8), 36 lb-in (AWG 6 4)0.8 2 mmAs Required
1 x 25 (AWG 4 18) / 2 x 10 (AWG 8 18)2.4 Nm21 lb-in (AWG 18 12), 25 lb-in
(AWG 10 8), 36 lb-in (AWG 6 4)0.8 2 mmAs Required
Technical Data
-
8/12/2019 Pg 01101007 e
22/320
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Let-Through Energy I2t
Characteristic B and C
Characteristic D
2 A
1 A
0.5 A
10 A13 A
16 A20 A25 A32 A40 A
50 A
63 A
4 A
3 A
6 A
0.5 1.5 151 2 3 4 5 6 7 8 910
103
104
105
8
6
4
2
1.5
8
6
4
2
8
6
4
3
1.5
i2dt[A2s]
Icc rms
[kA]
WMZS-...-B4HI
10 A
13 A
16 A
20 A
25 A
32 A
40 A
6 A
0.5 1.5 151 2 3 4 5 6 7 8 910
103
104
105
8
6
4
2
1.5
8
6
4
2
8
6
4
1.5
i2dt[A2s]
Icc rms
[kA]
Let-Through Current ID
Characteristic B and C
Characteristic D
63 A
40 A50 A
32 A
20 A25 A
16 A
13 A
10 A
6 A
4 A
3 A
2 A
1 A
0.5 A
0.5 1.5 151 2 3 4 5 6 7 8 910
103
104
9
8
7
6
5
4
3
2
1.5
5
2
lD
[A]
Icc rms
[kA]
40 A32 A
20 A25 A
16 A
13 A
10 A
6 A
0.5 1.5 151 2 3 4 5 6 7 8 910
103
104
9
8
7
6
5
4
3
2
1.5
5
2
lD
[A]
Icc rms
[kA]
TechnicalD
ata
Technical Data
-
8/12/2019 Pg 01101007 e
23/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Influence of the Ambient Temperature on the Thermal Tripping Behavior
Corrected values of the rated current dependent on the ambient temperature
In(A)
Ambient Temperature T
-25C -20C -10C 0C 10C 20C 30C 35C 40C 45C 50C 55C 60C
0.160.250.50.75
0.200.310.610.92
0.190.300.600.90
0.190.290.580.87
0.180.280.560.84
0.170.270.540.81
0.170.260.520.78
0.160.250.500.75
0.160.250.490.74
0.150.240.480.73
0.150.240.470.71
0.150.230.460.69
0.140.230.450.68
0.140.220.440.66
11.51.62
1.21.82.02.4
1.21.81.92.4
1.21.71.92.3
1.11.71.82.2
1.11.61.72.2
1.01.61.72.1
1.01.51.62.0
0.991.51.62.0
0.971.51.51.9
0.951.41.51.9
0.931.41.51.9
0.901.41.41.8
0.891.31.41.8
2.533.54
3.13.74.34.9
3.03.64.24.8
2.93.54.14.7
2.83.43.94.5
2.73.33.84.3
2.63.13.74.2
2.53.03.54.0
2.53.03.43.9
2.42.93.43.9
2.42.83.33.8
2.32.83.23.7
2.32.73.23.6
2.22.73.13.5
567
8
6.17.38.6
9.8
6.07.28.4
9.6
5.87.08.1
9.3
5.66.77.9
9.0
5.46.57.6
8.7
5.26.37.4
8.4
5.06.07
8.0
4.95.96.9
7.9
4.85.86.8
7.7
4.75.76.7
7.6
4.65.66.6
7.4
4.55.46.4
7.2
4.45.36.3
7.110121315
12151618
12141618
12141517
11131517
11131416
10131416
10121315
9.9121315
9.7121315
9.5111214
9.3111214
9.0111214
8.9111213
16202532
20243139
19243038
19232937
18222836
17222735
17212633
16202532
16202532
15192431
15192430
15192330
14182329
14182228
405063
496177
486076
475873
455671
435468
425266
405063
394962
394861
384760
374658
364557
354456
Influence of the Mains Frequency
Influence of the mains frequency on the tripping behavior IMA
of the instantaneous release
Mains Frequency f [Hz]
16 2/3 50 60 100 200 300 400
IMA
(f)IMA
(50 Hz) [%] 91 100 101 106 115 134 141
Load Carrying Capacity of Adjoining Miniature Circuit Breakers
Number of circuit breakers
Ratedd
iversit
y
factor
1 2 3 4 5 6 7 8
0.70
0.80
0.90
1.00
-
8/12/2019 Pg 01101007 e
24/322
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
ACCESSORIES
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Auxiliary Contacts and Voltage Trips
ModuleCircuitDiagram Description
Rated OperationalVoltage
CatalogNumber
Standard Auxiliary Contacts
2
14 1112H
1NO / 1NC Installs on Left Side of WMZS orShunt Trip
Max. One per WMZS (1077) Device Switches When WMZS is Tripped
Electrically or Manually
230 Vac WMZSAUX
Auxiliary / Trip Indicating Contact
Small Selector Screw Changes Mode Two Form C (Changeover) Contacts Installs on Left Side of WMZS or
Shunt Trip Auxiliary Contacts Switch When
WMZS is Tripped Electrically orManually
Trip Indicating Contact Switches OnlyWhen WMZS is Tripped Electrically
230 Vac WMZSAUXTRIP
Undervoltage Trip
D2
U
D1
Prevents WMZS from Operating UnlessVoltage is Present
Installs on Left Side of WMZS Includes Test Button
115 Vac WMZSUVR115
230 Vac WMZSUVR230
400 Vac WMZSUVR400
Shunt Trip
C2
C1
Allows Remote Trip of WMZS Installs on Left Side of WMZS
110 415 Vac110 230 Vdc
WMZSST415
12 110 Vac12 60 Vdc
WMZSST110
Allowable Combinations of Accessories
1
2 4 1.12 4.14
1 .1 4 4 .1 2
1.11
OFF
4.11N
AUX
TRIP
AUX AUX AUX
TRIP
WMZS WMZS WMZS
Circuit
Breaker
or
Circuit
Breaker
Shunt
Trip
or
Circuit
Breaker
UnderV
Trip
Accessories
Accessories
-
8/12/2019 Pg 01101007 e
25/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
ACCESSORIES
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Bus Bar System
DescriptionRated OperationalCurrent (A)
Number of Poles perDevice Number of Terminals
CatalogNumber
Without Auxiliary Contacts
For connecting WMZS SupplementaryProtectors without auxiliary contacts.May be fed from line or load side.
80 1 57 WMZS1P57T
2 56 WMZS2P56T
3 57 WMZS3P57T
100 1 57 WMZS1P57T25
2 56 WMZS2P56T25
3 57 WMZS3P57T25
Auxiliary / Trip Indicating Contact
For connecting WMZS SupplementaryProtectors with auxiliary contacts.May be fed from line or load side.
80 1 37 WMZS1P37TAUX
2 46 WMZS2P46TAUX
3 48 WMZS3P48TAUX
100 1 37 WMZS1P37T25AUX
2 46 WMZS2P46T25AUX
3 48 WMZS3P48T25AUX
WMZS WMZS WMZS
WMZS WMZS
35 lb-in
(4 Nm)
22 lb-in
(2.5 Nm)
WMZSBCONA
WMZS35EXT
WMZS3CAP
or
WMZS1CAP
WMZSBBTC
50 lb-in
(5.5 Nm)
-
8/12/2019 Pg 01101007 e
26/324
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Technical Data
DescriptionWMZSAUXWMZSAUXTRIP WMZSST WMZSUVR
Electrical
Contact Function 1A + 1B2 C/O
Rated Operational Voltage Un
250 Vac 115 Vac WMZSUVR115230 Vac WMZSUVR230400 Vac WMZSUVR400
Voltage Range WMZSST110 12 110 Vac12 60 Vdc
Voltage Range WMZSST415 110 415 Vac110 230 Vdc
Closing Threshold [x Un] 0.8
Tripping Threshold [x Un] 0.5
Rated Frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
General Use (UL / CSA) AC230 / 240 Vac DC110 / 120 Vdc
2 / 2A0.5 / 0.5A
Pilot Duty A600 / Q600
Conventional Free Air Thermal Current Ith
4A
Rated Operational current AC-13 I
e
AC-15 Ie
DC-13 Ie
3A (250 Vac)2A (250 Vac)0.5A (110 Vdc)
Rated Insulation Voltage Ui
250 Vac
Minimum Operating Voltage per Contract Umin
5 Vdc
Rated Impulse Withstand Voltage (1.2/50) Uimp
2.5 kV
Rated Conditional Short-Circuit Current with 6A Back-Up Fuse ISC
1 kA
Max. Admissible Back-Up Fuse 4A gL
Mechanical
Standard Front Dimension 45 mm 45 mm 45 mm
Device Height 80 mm 80 mm 80 mm
Mounting Width 8.8 mm 17.6 mm 17.8 mm
Mounting On MCB IEC/EN 60715 Top-Hat Rail IEC/EN 60715 Top-Hat Rail
Degree of Protection Enclosed IP40 IP40 IP40
Terminal Protection Protection AgainstElectric Shock to IEC 536
Protection AgainstElectric Shock to IEC 536
Protection AgainstElectric Shock to IEC 536
Terminals Lift Terminals Twin-Purpose Terminals Twin-Purpose Terminals
Terminal Capaci ty Solid Flexible
0.5 2.5 mm2
0.5 2.5 mm21 2.5 mm2
1 2.5 mm22 x (1 2.5) mm2
2 x (1 2.5) mm2
Tightening Torque of Terminal Screws 0.8 1.0 Nm (7 9 lb-in) 2.4 Nm (21 lb-in) 0.8 Nm (7 lb-in)
TechnicalD
ata
Technical Data
-
8/12/2019 Pg 01101007 e
27/32
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Dimensions
Miniature Circuit Breakers
WMZS
80
1P 2P 3P
17.5
80 80
35 52.5
45
4.55.5
30.5
44
60
11
Auxiliary Contacts
WMZSAUX
WMZSAUXTRIP
Shunt Releases
WMZSST
Undervoltage Releases
WMZSUVR
44
2
8.9 5.5
60
3.4
80 85.4 45
9.6
9.6
449
60
4580
5.5
17.6 30.55.5
44
60
80
26.2
45
10
80
17.8 5.5 44
60
45
-
8/12/2019 Pg 01101007 e
28/326
UL 1077 DIN Rail Supplementary ProtectorsWMZS Circuit Breakers
TECHNICAL DATA
EATON CORPORATION UL 489 and UL 1077 DIN Rail Miniature Circuit Breakers
Bus Bar and Accessory Weights and Dimensions
Catalog Number
UnitWeight(kg)
Length(mm)
Width(mm)
Height(mm)
WMZS1P57T
WMZS2P56TWMZS3P57T
0.29
0.640.83
1009
9911009
15
2222
15
3737
WMZS1P37TAUXWMZS2P46TAUXWMZS3P48TAUX
0.260.630.79
9851009982
152222
153737
WMZS1P57T25WMZS2P56T25WMZS3P57T25
0.360.791.04
10099911009
152222
153737
WMZS1P37T25AUXWMZS2P46T25AUXWMZS3P48T25AUX
0.310.730.97
9851009982
152222
153737
WMZS35EXTWMZSBCONAWMZSBBTCWMZS1CAP
WMZS3CAP
0.030.030.0030.001
0.001
60408514
24
1718125
22
29302410
10
L W
H
TechnicalD
ata
-
8/12/2019 Pg 01101007 e
29/32
-
8/12/2019 Pg 01101007 e
30/32
-
8/12/2019 Pg 01101007 e
31/32
-
8/12/2019 Pg 01101007 e
32/32
Eaton CorporationElectrical Sector
1111 Superior Ave.Cleveland, OH 44114United States
877-ETN-CARE (877-386-2273)Eaton.com
Eatons Electrical Sector isa global leader in powerdistribution, power quality,control and automation, andmonitoring products. Whencombined with Eatons full-scaleengineering services, theseproducts provide customer-driven PowerChainsolutionsto serve the power systemneeds of the data center,industrial, institutional, publicsector, utility, commercial,residential, IT, mission critical,alternative energy and OEMmarkets worldwide.
PowerChain solutions helpenterprises achieve sustainableand competitive advantagesthrough proactive managementof the power system as astrategic, integrated assetthroughout its life cycle,resulting in enhanced safety,greater reliability and energyefficiency. For more information,visit www.eaton.com/electrical.