Petzl Sport Catalog 2011 En

2011

www.petzl.com

© Serge Caillault, Pascal Tournaire, John Evans, Jocelyn Chavy, Arnaud Childeric Kalice

2011 Z12To find a Petzl retailer near you or anywhere in the world go to: www.petzl.com/dealers TOOLS AND TECHNIQUES

ENGLISH

Sharing expertise…

“My father, Fernand Petzl, was an artisan and explorer with a passion for caving. For him, creating and refining equipment was a profound pleasure. He was an obsessive, creative worker who offered his ideas to help his companions by producing the tools they needed to explore the caves of Chartreuse and Vercors (France). From my childhood, I was immersed in this enthusiasm for discovery.

Afterwards, at Petzl, we have always started with this idea: designing tools for the people who use them. Tools that help them progress and commit in vertical or dark terrain. Innovative, useful, safe tools, often designed above and beyond the requirements of existing gear. Petzl has introduced changes to practices and techniques that have allowed revolutions to take place in activities related to lighting and verticality - the two areas of expertise in the company. The headlamp in the mountains, the GRIGRI in climbing… For forty years innovation has been at the heart of our business - and it remains so now more than ever.

By its very nature, progression has no limits: we are constantly inventing new solutions, and there is no reason for this to stop. Today I hope that we share the experience and technical expertise we have acquired at Petzl as widely as possible with those who participate in these activities.

It is with the desire to continue to propose and share solutions for progression that we have prepared this 2011 edition of the Petzl catalogue.”

Paul Petzl President

© Ben Ditto

4-5

6-7

8-9

10-11

14-15

16-17

18-19

20-21

Sean Villanueva-O’Driscall route finding on “Shepton Spire”, Torssukatak Fjord, Cape Farewell, Greenland

TOOLS AND TECHNIQUESSOLUTIONS

Partner check: safety check between partnersSport climbing

Backing off a single pitch: descending and removing gearSport climbing

Self-rescue: ascending to the anchor after falling in an overhangMulti-pitch climbing

Quickdraws and carabiners: placement and clippingMulti-pitch climbing

Crevasse rescue: transferring a partner’s weight onto an anchorMountaineering

Hauling a bag: preparation and techniqueAid climbing

Progression on via ferrata: belaying a childVia ferrata

Night trails: tips for choosing a headlampTrail running

4 www.petzl.com 5

© Jocelyn Chavy

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.

Partner check: safety check between partners

Climbing with zero risk is, of course, impossible. However, learning the right moves, both for climbing and for using

the equipment, significantly reduces the risk of accident. But this learning is not everything. Force of habit, over-confidence, and fatigue can all reduce vigilance. For greater security, why not take advantage of the fact that there are usually two climbers? Particularly before really getting started, when the equipment is being put into place. At the crag, as in the mountains, making it a rule to partner check before leaving the ground will make the climbing more “relaxed”.

"Seriously, Dad, I never thought this could happen… to you!"This is how my twelve-year-old son Vincent scolded me a few weeks after I had landed at his feet on a cement floor after a 10-meter fall in a Grenoble climbing gym. I can still hear the voices coming through the fog of my bewil-dered conscience: "He wasn’t tied in… look, the rope is still hanging from the top!"I hadn’t completed my knot? Impossible! Not me! And yet…Yet it had been a Sunday like any other. Sure, I was a bit tired, a little preoccupied, and in a somewhat noisy gym. Nothing extraordinary, really. It was neither the serac fall of the century, nor the collapse of the West Face of the Drus! No reassuring explanation to help me accept the unacceptable. Reasoning only increased my incompre-hension. In my twenty-five years of amateur mountainee-ring and climbing, never an accident, not even a close call. Maybe one time a few rocks heard falling a bit too close… I’m quite a safety fanatic, according to my friends. A case in point: I had even backed up my son’s belay to an over-stuffed pack.

And yet… that Sunday I made an error that could have cost me my life. So, was it fate? No! A simple oversight: counting on only your own vigilance shows a dangerous lack of humility.Any day, a seemingly innocent series of events can lead to what many experts have sadly experienced. This one day could be your last. However, with a simple partner check of equipment prior to climbing, it is easy to practically remove this type of risk. Participants in other exposed activities, such as divers, have understood and implemented this concept for a long time. Why not we climbers, moun-taineers and cavers?It is time for us, specially the regular participants, to adopt new habits.

Romain LécotPetzl General Director

Climber check by belayer:• Proper tie-in with tight knot

Belayer check by climber:• Rope positioned correctly in belay device• Locked carabiner• Knot tied at end of rope

More information on equipment use and belaying

at www.petzl.com

Sport climbing

6 www.petzl.com 7

≈ 115 daN

70 kg

70 kg

70 kg

≈ 90 daN≈ 115 daN

70 kg

70 kg

70 kg

≈ 90 daN

SPEEDY Am’D

© Lafouche

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.

More information at:www.petzl.com

Product list is non-exhaustive. Find a complete list of products and descriptions in the products section.

Backing off a single pitch: descending and removing gear

You are unable to climb any higher! The lead climber is stuck at a bolt in the middle of a pitch. The easiest

option is to be lowered on top-rope, leaving the quickdraws and asking someone to collect them later, or collecting them yourself after climbing a route next to it. If none of these options is possible, how can you descend and clean the route with limited risk?

Descend on a single bolt? Lower or rappel?

Lowering off two pointsTechniques for lowering when backing off a climb

Lowering with Prusik

Stress on the boltThe stress on the bolt is approximately 25 daN higher with lowering than with rappelling (for two people of 70 kg). This number is negligible compared to the strength required of a bolt (2500 daN). The stresses placed on a bolt when lowering or rappelling are therefore practically identical.Lowering is therefore recommended since it allows the climber to remain tied in throughout the lowering process.

Avoid the risk of breakageWhen it is difficult to estimate the strength of a bolt, it is necessary to use a technique that takes into account the risk of the anchor breaking.

Transfer weight to your feet to reduce tension on the quickdraw. Place a quick link in the bolt between the quickdraw and the rock. Thread the rope through the quick link; lock it tightly. Remove the quickdraw. Lower to the next bolt. Repeat the operation. Descend and clean the route.

Transfer weight to your feet to reduce tension on the quickdraw. Place a quick link in the bolt between the quickdraw and the rock. Thread the rope through the quick link; lock it tightly. Make a Prusik knot with a cordelette and attach it to the belay loop of your harness with a locking carabiner. Remove the quickdraw. Descend and clean the route.

The Prusik knot is a multidirectional knot, jamming in both directions.

Consequences of a broken boltIf the top bolt breaks, the climber will be held by the second bolt.

Consequences of a broken boltIf the top bolt breaks, the climber will be held under the next quickdraw by the Prusik knot.Technique tested on a 4 m fall with an 80 kg weight, using a 7 mm Prusik cordelette and a single 9.7 mm rope. Observations:• fall arrested• cordelette and rope intact

7 mm cordelette for Prusik

Sport climbing

8 www.petzl.com 9

TIBLOC Am’D REVERSO 3ST’ANNEAU 120 cm ANGE FINNESSE

© Lafouche

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.



Self-rescue: ascending to the anchor after falling in an overhang

Installing the ascending system Ascending

1 - Install the TIBLOC ascender using a locking carabiner. Make a knot at the end of a sling and clip it into the carabiner. This will be your footloop. Place the quickdraw into the sling above the knot. The length of the sling should allow you to stand up in it for ascending.

2 - Stand up to attach the quickdraw to the harness. This maneuver creates slack in the rope above the tie-in knot.

Move the TIBLOC up the rope, stand in the sling and simultaneously take up the slack in the REVERSO 3. For maximum efficiency, keep the body aligned with the rope. Sit in the harness, return the hand to the free end of the rope near the REVERSO 3 and repeat the maneuver.

5 - Begin ascending. No need to go quickly; rather, establish a good rhythm.

Caution: keep your thumb on the TIBLOC during the entire ascent.

In multi-pitch climbs, a situation can quickly become complicated and delicate. For example, when finishing

an overhang, the leader falls and finds him/herself hanging in midair, under the roof. Imagine that it is impossible to grab the rope or the rock, or to be lowered by the second (not enough rope). The only solution is to be autonomous and ascend the rope alone. The TIBLOC ascender, REVERSO 3 belay device, slings and quickdraws will play a key role. On multi-pitch routes, they should never be forgotten!

3 - With a locking carabiner, place the REVERSO 3 on the harness in Reverso mode. Install the rope in the REVERSO 3 with a second locking carabiner and take up all the slack in the rope.

4 - Stand up in the sling to remove the quickdraw. Sitting in the harness will transfer your weight onto the REVERSO 3.

Multi-pitch climbing

10 www.petzl.com 11

2 31

2 31

2 312 31

2 31

2 31

ANGE SANGE L

© Tony Lamiche

2 31

2 31

2 31

2 31

2 31

2 31

2 31

2 31

2 31 2 31

2 31

2 312 31

2 31

2 31

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.


Quickdraws and carabiners: placement and clipping Multi-pitch climbing

Clipping a carabiner or quickdraw is a basic technique associated with the progression of a climber. At first

glance, nothing too complicated. In the detail, though, there are many aspects to consider in order to move quickly and surely: in particular, placement of the quickdraw into the bolt in relation to the rope, and methods of clipping the rope. For example, when clipping a half rope in the middle of a crux with a small carabiner, good clipping skills are a must… Here are some tips for making life easier and climbing in peace.

Placing the quickdraw

With small ANGE S carabiners, it is more efficient to keep the fingers on the outside. Stabilize the quickdraw carabiner and put the rope through it.

The carabiner gate must always face away from the climber’s direction of travel. The rope in the carabiner must pass through it from the cliff side to the outside. Incorrect positioning of the quickdraw or the rope could cause the rope to unclip, either due to rope movement or to the carabiner flipping on the bolt during a fall.

With larger ANGE L (or SPIRIT) carabiners, you can place a finger into the carabiner to stabilize it. Then insert the rope.

Clipping the rope

Rope path

ANGE L and ANGE SUltra-light, compact carabiners with MonoFil Keylock system.

Always use a quickdraw equipped with STRING type webbing protection. The anchor-end carabiner must be mobile (no STRING). The rope-end carabiner must be fixed (with STRING).Warning: never install two STRINGs on one quickdraw. It would be too rigid: risk of poor positioning (e.g. cantilevered loading).

Note: always use the same carabiners for the anchor-end or the rope-end. Never put an anchor-end carabiner on the rope-end. An anchor-end carabiner may become slightly nicked with use. During a fall, if the rope rubs on such a nick, it can become damaged and require early retirement.

Contact surfaces designed to extend the life of the carabiner and limit rope wear

Straight nose to optimize clipping and unclipping

Extra-wide 23 mm opening (ANGE S)

MonoFil Keylock system

H-profile provides an excellent strength-to-weight ratio


131312 © Pascal TournairePhilippe Batoux on “Mixtomatose” au Nant de l’Enfer, Savoie, France

14 www.petzl.com 15

- MINI TRAXION - OK x 2 - TIBLOC - ST’ANNEAU - OSCILLANTE

LASER SONIC

1 2

3 4

mini 50 cm

© Pascal Tournaire

MINI TRAXION

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.


Find all advice on glacier travel and crevasse rescue

at www.petzl.com

Crevasse rescue: transferring a partner’s weight onto an anchor

A dead-man anchor is usedThe principle is to use an object that provides sufficient resistance to the tension exerted on it. In snow, you can bury an ice axe, a backpack, a ski. If there is ice, you will need an ice screw. Complete the anchor by attaching a long sling. In snow, it is important to place the sling in a groove in the anticipated direction of pull so that the buried object is not pulled out.

Installation of the anchor

On a glacier, the classic accident is of course a fall into a crevasse. If progression is on a taut rope,

the appropriate reflex of the surface climbers would be to arrest the fall with their counterweight. Once the fall is arrested, the first priority is to create an anchor to support the weight of the victim. With a party of two, the surface climber is alone. She must install an anchor and transfer the weight of the victim onto it by herself. To succeed, she must carry out the following sequence, all the while staying in counterbalance and having all her gear (progress capture pulley, carabiner, sling…) easily accessible on the harness. Training is essential!

Transferring the weightOnce the anchor point is in place, you can begin transferring the weight.

The transferConnect the MINI TRAXION to the anchor sling with a symmetrical locking carabiner (OK). Slide the progress capture pulley down the rope to put the sling under tension. Slowly and smoothly transfer the weight. The rescuer places partial tension on the anchor to check that it is solid. He can then transfer the entire load.

Installing the progress capture pulleyFirst, install the progress capture pulley on the rope holding the victim. Be sure that the pictogram of the person on the black side plate is on the side of the victim.

Once the load is on the anchor, the remainder of the rescue can be organized: ascending the rope, hauling… Warning: to prevent further accidents, the rescuer(s) should always remain on back-up belay.

Before closing the pulley for the transfer, remember to engage the toothed cam to allow jamming. Verify the jamming direction.

Mountaineering

16 www.petzl.com 17

PRO TRAXION ASCENSION WALLSTEP SWIVEL S © Tony Lamiche

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.



Hauling a bag: preparation and technique

In aid climbing, it is essential to organize your equipment. It is impossible to empty your haul bag at each station to find an item forgotten at the bottom. Each item must have its place. In the same way, organization for hauling should also be efficient. First of

all, having several bags of 30 to 40 kg, rather than one 80 kg bag, is a good idea. It is not uncommon to see an inexperienced party leave with a huge bag and spend two or three hours hauling it up one pitch! Choosing the hauling technique best suited to, for example, a traverse or a big overhang is also key. Here are some tips for efficiency and for avoiding any serious errors. Before you head off for a vertical adventure of two or three days, training is strongly recommended.

Preparing for hauling

Attachment of haul bagThe haul bag should always remain attached. The attachment knot should be protected with a cut plastic bottle to keep it from snagging in a crack or under an overhang. Between the knot and the bag, you can use a SWIVEL to avoid rope twists during manipulations. Only one of the bag’s two haul straps is attached to the carabiner or maillon under the SWIVEL. This way it is easy to open the bag without dropping it. When hauling, nothing should stick out from the bag, and the sling should be folded behind the flaps. Have a lanyard ready for attaching the bag to the station (a knotted rope end is perfect).

Installing a progress capture pulleyInstall the PRO TRAXION progress capture pulley on the station, always with two connectors:• one locking, for connecting the pulley to the station• another for locking the swinging side plateAlways check the positioning of the pulley with respect to the direction of rope pull. The direction of pull should be in line with the pulley. With lateral pull, the rope can be damaged, or get caught between the swinging side plate and the sheave.Remember: Because of the great stresses created during hauling, the hauling station should be triangulated and “bomb-proof”.

Hauling technique

“Balancier” techniqueThe easiest and most efficient hauling technique is the “balancier” on the ASCENSION handled rope clamp. It uses the weight of the body as a counterweight to raise the bag. This technique is efficient, although it can only be used with a light bag (30 to 40 kg). For heavier bags, you can either use two climbers for counterweight or employ other hauling techniques.Warning: during these manipulations, the counterweight climber must always remain attached to the station with a rope.

Traverses and overhangsWhen the pitch is a traverse or a big overhang, the hauling technique needs to be adapted. The goal is to place the bag plumb with the direction of the hauling station to limit pendulums and stress on the anchor.First, attach the bag several meters from the lower end of the rope. The lower climber lowers the bag on a Munter hitch while the upper climber hauls gently. Once the bag is vertically aligned with the upper anchor, normal hauling continues.

Munter hitch

Aid climbing

18 www.petzl.com 19

PICCHU corde (UIAA)SIMBA REVERSO 3SCORPIO Am’D SPIRIT EXPRESS

© Tony Lamiche

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.



Progression on via ferrata: belaying a child

A via ferrata outing with the children can be both fun and educational. Bars, ramps, steps, suspension

bridges, and rope-bridges create a playground that is ideal for learning about upward progression.

With children, it is essential to use a rope along with energy absorbing lanyards

1 - On a via ferrata, as with all vertical activities, there is never a zero risk factor. With children, the parents’ / leaders’ vigilance should be heightened. Some tips for preparing the outing:• Choose a via ferrata that you know, one that is manageable, with escape options, and suited to your technical level as well as your child’s• Explain the instructions for safe progression before leaving• Be properly equipped: appropriate footwear, technical equipment (harnesses, energy absorbing lanyards, helmets, ropes…)• Plan for enough water and food• And of course, check the weather forecast before leaving

2 - Regardless of the length of the energy absorber, a classic rope belay system should be set up to enhance the child’s safety. The rope is used only to belay the child. To reduce weight, a 30 m length of UIAA rope is sufficient. Use a figure eight knot to tie into the harness.

Most via ferrata energy absorbers are not designed for belaying children.For example, the SCORPIO lanyard is designed for belaying a person weighing between 45 and 90 kg.

3 - Use an energy absorbing lanyard when passing intermediate anchors.To learn more about progression techniques using energy absorbing lanyards: www.petzl.com

Belaying while moving

Belaying from a fixed anchor

4 - Over easy horizontal traverses, the leader and child use their progression lanyards to progress simultaneously with the rope taut.

7 - During vertical sections, the leader progresses with energy absorbing lanyards and passes the rope through the pigtails or the quickdraws, if necessary, to keep it in line. The child waits on belay with his lanyards and helps manage the rope. Caution: these pitches should not be too long.

6 - A relatively close tie-in allows better supervision of the child. Lanyards will keep the child connected to the cable in case of a fall.

9 - A REVERSO 3 or a munter hitch on a locking carabiner is used for belaying the ascent of the second.

5 - While progressing, the leader passes the rope through the pigtails or the quickdraws; the child then removes it.

8 - Above the pitch, the leader should remain visible and set up a station on the energy absorbers in order to belay the child’s ascent. The rope is used to avoid a fall. The child removes the rope from the pigtails while progressing.

Via ferrata

20 www.petzl.com 21

© Lafouche

© Thomas Marchand

© Arnaud Childeric

© Arnaud Childeric

t 0

0,25 lux

0,25 lux2 m

2 m

t 0

t 0h30 t 10h t 30ht (h)

t (h)t 0

0,25 lux

0,25 lux2 m

2 m

t 0

t 0h30 t 10h t 30ht (h)

t (h)

ULTRA BELT ACCU 4 MYO RXP TIKKA XP² CORE

Info

rmati

on is

non

-exh

austi

ve. R

efer t

o th

e ot

her p

ages

as

well

as to

the

user

instr

uctio

ns a

nd te

chni

cal m

anua

ls. T

echn

ical t

rain

ing

is es

sent

ial.



Luminous fluxFor a headlamp, the luminous flux, measured in lumens (lm), represents the total quantity of visible light emitted. It is the equivalent of the horsepower of a car or motor. For example, a Petzl ULTRA reaches a luminous power of 350 lm in maximum mode.The quantity of light needed varies among individuals, the nature of the terrain and the race and expected speed. Nevertheless, a good luminous flux allows you to see better, to save your strength and to go faster. For technical trails, a power greater than 150 lm is recommended.

Duration/burn timeA headlamp’s battery life should be considered in relation to the length of the race. It is the length of time during which lighting is greater than the light of a full moon (0.25 lux). It is expressed in minutes. For example, an ULTRA in high mode has a battery life of 3 h 15, meaning that after 3 h 15, the lighting of an ULTRA at two meters is that of a full moon, or 0.25 lux. Depending on the model of the headlamp, change in light output over time is controlled in two ways: regulated lighting and non-regulated lighting.

Lighting distanceLight quantity, received by a surface, diminishes as its distance from the light source increases. This is the lighting parameter that is measured in Lux. For many headlamp manufacturers, lighting distance indicates the distance to which the quantity of light received on a surface is equivalent to the quantity of light of a full moon (0.25 lux). For example, an ULTRA in maximum mode has a lighting distance of 120 m. At 120 m the light it emits is the same as that of a full moon, or 0.25 lux.

Wearing the headlampHeadlamps are worn either “all on the head” or in a BELT version (lighting on the head, remote energy source). The BELT versions reduce the weight on the head. The remote battery pack allows the energy source to be protected from the cold under clothes. The energy available is thus better conserved.

Shape of the beamFor the same light output, depending on the headlamp model, the flux can be uniformly distributed over a very wide area, or be concentrated in a very narrow spot to have a much greater lighting distance. This type of lighting is recommended for technical trails, where you have to see far and quickly. For a “classic” trail, mixed lighting, which combines a wide beam and a focused beam, is practical.

CORE rechargeable battery and OS by Petzl softwareThe new CORE rechargeable battery is designed for the TIKKA 2 - ZIPKA 2 headlamp line. This battery is easy to insert into the headlamp in a few seconds instead of the usual three batteries. It offers an advantage over standard batteries for frequent or intensive headlamp use. It is more economical to use - it pays for itself after four sets of alkaline batteries. Lithium Ion Polymer technology guarantees a battery life equivalent to more than 900 batteries. The CORE battery contributes in a truly efficient way to limiting waste that is harmful to the environment. It is very easy to insert and can be charged via any standard USB charger: a cell phone charger, a multimedia device, cigar lighter charger, or even a solar panel, a portable energy source, a computer, etc.OS by Petzl software is intuitive and user-friendly, and allows you to configure the battery to personalize the performance of TIKKA 2 - ZIPKA 2 headlamps to respond to your lighting needs. Once the CORE is connected to a computer loaded with OS by Petzl, you can choose between regulated or non-regulated lighting. Lighting duration and intensity can also be adjusted.

Unregulated lightingAs soon as the headlamp is on, light output begins to decrease gradually. This progressive decrease allows longer battery life. This mode is useful when light output is not the most important consideration.

Regulated lightingLighting level is constant. It remains at a high a level for a certain period of time, then decreases markedly after that time. Regulated lighting headlamps are designed for trails, where full power is important.

Trail runningNight trails: tips for choosing a headlamp

Having a good understanding of lighting performance is essential for choosing a headlamp for night

running. This performance is linked to notions like luminous flux, distance, battery life, and lighting regulation. Let’s explore these parameters.

© Bernardo Gimenez

24 - 29

30-33

34-37

38-43

44-48

49-51

52-53

54-55

56-58

59-60

61

62-75

TOOLS AND TECHNIQUESPRODUCTS

Montsant, Spain

Harnesses

Helmets

Belay devices, descenders

Carabiners

Ice axes

Pulleys

Crampons

Packs

Ascenders

Anchors

Accessories

Headlamps

24 www.petzl.com 25

HIRUNDOS C36Ultralight harness for high-end climbingFrame Construction technology is pushed to the maximum. An ultralight and super compact harness for maximum climbing performance. Four equipment loops won’t limit this harness to short sport climbs.Size XS = weight: 270 g, waist size: 59 - 71 cm, leg loops: 43 - 48 cm Size S = weight: 280 g, waist size: 66 - 78 cm, leg loops: 47 - 52 cm Size M = weight: 300 g, waist size: 71 - 83 cm, leg loops: 52 - 57 cm Size L = weight: 315 g, waist size: 80 - 94 cm, leg loops: 57 - 62 cm

SAMA C21Men’s climbing harness with elastic leg loopsThe SAMA is the perfect harness for cragging and long routes. The elasticized leg loops stay snug to ensure comfort in a fall and when hanging out at the belay, without constricting movement while climbing. Very breathable for those long, hot days.Size S = weight: 370 g, waist size: 70 - 81 cm, leg loops: 47 - 52 cm Size M = weight: 390 g, waist size: 76 - 90 cm, leg loops: 52 - 59 cm Size L = weight: 420 g, waist size: 85 - 100 cm, leg loops: 57 - 64 cm Size XL = weight: 445 g, waist size: 89 - 104 cm, leg loops: 62 - 67 cm

SELENA C55Women’s climbing harness with elastic leg loopsAs the women’s version of the SAMA, the SELENA offers all the performance of a Petzl harness, with fit and comfort characteristics tailored for a woman’s physique.Size XS = weight: 320 g, waist size: 58 - 69 cm, leg loops: 43 - 48 cm Size S = weight: 360 g, waist size: 60 - 71 cm, leg loops: 47 - 52 cm Size M = weight: 385 g, waist size: 67 - 81 cm, leg loops: 52 - 59 cm Size L = weight: 405 g, waist size: 74 - 89 cm, leg loops: 57 - 64 cm

ADJAMA C22Men’s climbing and mountaineering harness with adjustable leg loopsEasy-to-adjust leg loops mean this harness is great for ice climbing and mountaineering. Low bulk and flexible rear equipment loops prevent the waistbelt from interfering while wearing a pack.Size S = weight: 420 g, waist size: 70 - 81 cm, leg loops: 47 - 57 cm Size M = weight: 435 g, waist size: 76 - 90 cm, leg loops: 52 - 62 cm Size L = weight: 460 g, waist size: 85 - 100 cm, leg loops: 57 - 67 cm

LUNA C35Women’s climbing and mountaineering harness with adjustable leg loopsThe women’s version of the ADJAMA, with fit and comfort characteristics specifically designed for a woman’s physique.Size S = weight: 410 g, waist size: 60 - 71 cm, leg loops: 47 - 57 cm Size M = weight: 425 g, waist size: 67 - 81 cm, leg loops: 52 - 62 cm Size L = weight: 450 g, waist size: 74 - 89 cm, leg loops: 57 - 67 cm

Harnesses

CALIDRIS C57Comfortable and ventilated adjustable harness for extended periods of hangingThe wide waistbelt and leg loops of the CALIDRIS provide all the comfort, support and ventilation needed for long aid routes and other activities requiring extended periods of hanging (cleaning and equipping routes, etc.). Lightweight and comfortable, with large gear-carrying capacity, it is perfect for big wall climbing. The CALIDRIS is sized to fit larger users for all types of climbing.Size 1 = weight: 600 g, waist size: 65 - 95 cm, leg loops: 48 - 60 cm Size 2 = weight: 685 g, waist size: 83 - 110 cm, leg loops: 56 - 70 cm

CORAX C51Comfortable and adjustable harnessCORAX is the multi-purpose harness par excellence. It comes in two sizes, so adapts to all user shapes. Its comfort and ease of use make it suitable for a wide range of users for climbing, mountaineering or via ferrata. The comfort and ventilation have been improved. The two DoubleBack buckles center the equipment loops in optimal position.Size 1 = weight: 490 g, waist size: 60 - 90 cm, leg loops: 48 - 58 cm Size 2 = weight: 530 g, waist size: 75 - 105 cm, leg loops: 56 - 68 cm

KIT CORAX K30EClimbing kit containing CORAX harness, UNIVERSO belay system, BANDI chalkbag with belt and bag of POWER CRUNCH chalkWhether purchasing your first harness or upgrading from an old one, this kit offers the perfect combination of gear. The CORAX harness offers maximum versatility and comfort with excellent performance. It comes with the UNIVERSO belay system to handle any diameter of rope. The kit comes with a BANDI chalkbag with belt and 25 g of POWER CRUNCH chalk.Size 1 = weight: 490 g, waist size: 60 - 90 cm, leg loops: 48 - 58 cm Size 2 = weight: 530 g, waist size: 75 - 105 cm, leg loops: 56 - 68 cm

ASPIR C24Adjustable harness with padded waistbelt and leg loopsThe ASPIR is a comfortable harness that offers many of the advantages of our high-end harnesses: padded waistbelt and leg loops, a reinforced tie-in point and two equipment loops. Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Size 0 is specifically designed for kids.Size 0 = weight: 420 g, waist size: 53 - 72 cm, leg loops: 40 - 58 cm Size 1 = weight: 450 g, waist size: 68 - 94 cm, leg loops: 48 - 62 cm Size 2 = weight: 485 g, waist size: 86 - 110 cm, leg loops: 57 - 70 cm

26 www.petzl.com 27© Bernardo Gimenez

PANDION C29Basic adjustable harness with gear loopThis harness is great for climbing, glacier travel, and adventure racing. Also great for beginning climbers.Weight: 400 g, waist size: 60 - 101 cm, leg loops: < 67 cm

GYM C32Basic adjustable harness for beginners and group programsThis is a simplified version of the PANDION without a equipment loop for climbing rental programs, etc.Weight: 390 g, waist size: 60 - 101 cm, leg loops: < 67 cm

OUISTITI C68Full body harness for children under 30 kgBecause small children do not have well-defined hips for a waistbelt to hold, the full body design is necessary for safety.Weight: 350 g, leg loops: < 51 cm, chest length: 45 - 60 cm

SIMBA C65Full body adjustable harness for children less than 40 kgBecause small children do not have well-defined hips for a waistbelt to hold, the full body design is necessary for safety.Weight: 390 g, leg loops: < 51 cm, chest length: 35 - 60 cm

8003 C05Full body harness for adultsFor those who prefer a full body harness to protect against falls for all types of vertical recreational activities. This harness is designed for alpine climbing.Size 1 = weight: 580 g, waist size: 60 - 95 cm, leg loops: 42 - 62 cm Size 2 = weight: 610 g, waist size: 75 - 105 cm, leg loops: 52 - 77 cm

VOLTIGE C60Adjustable chest harnessThis chest harness supports the climber while hanging and rappelling - for use only with a seat harness.Weight: 280 g

EASY C82Non-adjustable chest harnessEasy to use, compact, non-adjustable chest harness for support while hanging and rappelling - for use only with a seat harness.Weight: 135 g

Harnesses

Chris Sharma on “Lo Carrasclet” (8a), Montsant, Spain

28 www.petzl.com 29© Phil Bence

FRACTIO C16Caving harness with double waistbeltThe FRACTIO is a light, durable caving harness made extremely comfortable with its completely adjustable double waistbelt. Its compact size and its buckles positioned between the legs limit the risk of snagging during narrow passages.Size 1 = weight: 485 g, waist size: 60 - 95 cm, leg loops: 42 - 62 cm Size 2 = weight: 530 g, waist size: 90 - 105 cm, leg loops: 52 - 77 cm

SUPERAVANTI C12Basic lightweight caving harnessThe SUPERAVANTI is a lightweight caving harness designed for a wide range of users. It is entirely adjustable, thanks to its buckles, and its construction is particularly simple and sturdy. The attachment points are now positioned even lower in order to make rope ascents easier and more efficient. Its compact size and its buckles being positioned between the legs limit the risk of snagging during narrow passages.Size 1 = weight: 405 g, waist size: 60 - 95 cm, leg loops: 42 - 62 cm Size 2 = weight: 440 g, waist size: 90 - 105 cm, leg loops: 52 - 77 cm

TORSE C26 2Shoulder straps for positioning a CROLLThe TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents.Weight: 90 g

CANYON C86Canyoning harness with padded waistbelt and protective seatWhitewater cascades, rappelling, swimming, jumping… this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures.Weight: 700 g, waist size: 67 - 120 cm, leg loops: 52 - 77 cm

PROTECTION CANYON C86400Protective seat for CANYON harnessWeight: 170 g

CARITOOL P42Harness tool holderA great accessory for mountaineering, ice climbing and long routes, it allows quick access and organization of ice screws, pitons, nuts, etc. Will also allow for quick storage/holstering of ice tools. Compatible with the slots on most Petzl harnesses and also attaches to webbing waist belts of other harnesses.Weight: 25 g

Harnesses

Going down in the “Puits de Beffroi”, Soum Couy 3 hole, Pierre Saint martin Pyrénées Atlantique, France

30 www.petzl.com 31© Bertrand Delapierre

Helmets

METEOR III + A71Ultra-light, versatile helmetWeighing only 235 grams, the METEOR III + sets the standard in terms of lightness and comfort. It is also one of our most ventilated models. Its innovative adjustment system allows each climber to adjust his/her helmet to head shape. Originally designed for climbing and mountaineering, the METEOR III + also meets the European standards for cycling and whitewater sports.Headband: 53 - 61 cm, weight: 235 g

ALTIOS A45Ultra comfortable multi-purpose helmetThe hybrid suspension system, composed of a mesh panel and expanded polystyrene liner, makes this helmet extremely lightweight and comfortable to wear. Thanks to this innovative design, the helmet 'floats' above the head for a near-weightless feeling. The space between the head and the liner allows for effective ventilation with the Climate Control System. Durable ABS shell. This helmet is very ergonomic, adapting to any head shape, and offers two options for attaching a headlamp: a removable ADAPT system mount, or clips.Size 1 = headband: 48 - 56 cm, weight: 305 g Size 2 = headband: 53 - 61 cm, weight: 335 g

ELIOS A42Lightweight and durable helmetThis low profile helmet is easy to adjust, comfortable and well-ventilated. The adjustment wheel is quick and easy to use, even when wearing the helmet. The combination of shell and foam technology makes it perfect for rock climbing, ice climbing, mountaineering, canyoning, caving and via ferrata.Size 1 = headband: 48 - 56 cm, weight: 280 g Size 2 = headband: 53 - 61 cm, weight: 305 g

Arnaud Petit on the crux 5th pitch (8b) of the “Voie Petit”, Grand Capucin, France

32 www.petzl.com 33

ELIA A48Women's climbing and mountaineering helmetThe ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes.Headband: 52 - 58 cm, weight: 285 g

PICCHU A49Children's climbing and cycling helmetThe PICCHU helmet is designed for children who want to rock climb or cycle. It is very light and comfortable and constructed for durability. Three pages of stickers, with one reflective page, are included so that the helmet can be personalized and made more visible.Headband: 48 - 54 cm, weight: 310 g

ECRIN ROC A01Ultra-durable helmet with textile headbandThis is the classic Petzl helmet, the standard for mountaineering, climbing and caving. Extremely durable, this helmet can withstand the harsh conditions and rough treatment that are often encountered in the high mountains or deep caves.Headband: 53 - 63 cm, weight: 445 g

TRIOS E75 UWCaving helmet with ultra-powerful lighting, four regulated lighting modes and ACCU 2 ULTRA rechargeable batteryThe TRIOS helmet is designed for cavers looking for a two-in-one solution. The TRIOS comes with the headlamp mounted on the helmet, plus an elastic headband for wearing it without the helmet. This helmet offers great versatility. It has an ABS shell and a polystyrene liner. Lighting is provided by an ULTRA WIDE headlamp. This headlamp provides ultra-powerful regulated lighting of 300 lumens and a uniform beam for approximately 180°. It has four lighting modes and a reserve mode for when the Lithium Ion battery is almost discharged.Size 1 = headband: 48 - 56 cm, weight: 635 g Size 2 = headband: 53 - 61 cm, weight: 660 g

Helmets

SPELIOS E75Caving helmet with hybrid lighting: halogen / 14 LEDs with three regulated lighting modesThe SPELIOS is made up of a versatile helmet combining a shell with an expanded foam liner and a waterproof hybrid headlamp. This product is suited for cavers and canyoneers looking for a complete, durable and comfortable solution. The hybrid light source delivers a powerful, focused beam (halogen bulb) or a wide flood beam (LEDs), depending on the situation. For greater versatility, the LED light source has three regulated lighting modes to ensure a constant level of lighting until the batteries are completely discharged.Size 1 = headband: 48 - 56 cm, weight: 505 g Size 2 = headband: 53 - 61 cm, weight: 535 g

EXPLORER LED 14 E70 L14Caving helmet with three light sources: acetylene, halogen and 14 LEDsThe EXPLORER LED 14 combines the ECRIN ROC, a very durable helmet with mesh headband, with a waterproof hybrid light source, the FIXO DUO LED 14, and acetylene lighting. Used with the ARIANE acetylene generator, this combination is sure to satisfy the most demanding caver. The hybrid light source provides a choice of either a focused long-range beam with its halogen bulb, or flood beam for proximity lighting with its 14 LEDs. The latter light source offers three lighting levels and regulated lighting. This system provides a constant light until it switches to reserve power mode when the batteries become almost depleted.Headband: 53 - 63 cm, weight: 725 g

VIZION A44 1Face shield for METEOR III, ALTIOS and ELIOSThis modular face shield is compatible with the METEOR III, ALTIOS and ELIOS helmets, providing face protection from shattered ice and spindrift. It can be rotated upward when not needed or stored on top of the helmet during transport.Weight: 60 g

BOUCHON A01870Plugs for the ventilation holes of the ECRIN ROCThese removable plugs seal the ventilation holes in the ECRIN ROC helmet, keeping out water, snow, wind and cold.Weight: 3 g each

34 www.petzl.com 35

© Monica Delmasso

Belay devices-descenders

VERSO D19Petzl’s lightest belay/rappel device with descent control technology adapted to different rope typesThe VERSO is a simplified version of the REVERSO³. It offers a lighter, more compact option to climbers looking to reduce the weight and size of their gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology.Rope compatibility = single rope: ≥ 8.9 mm, half rope: ≥ 8 mm, twin rope: ≥ 7.5 mm. Weight: 57 g

UNIVERSO D18Belay system combining a VERSO and an ATTACHE 3D held in optimal position by a sliding connection pieceThe UNIVERSO is a complete and lightweight belay system that is particularly comfortable and efficient to use on all rope diameters. This system consists of a VERSO belay device, an ATTACHE 3D carabiner and an exclusive sliding connection piece.Rope compatibility = single rope: ≥ 8.9 mm, half rope: ≥ 8 mm, twin rope: ≥ 7.5 mm. Weight: 120 g

REVERSO 3 D17Ultra-light multipurpose belay/rappel device which regulates the amount of braking friction on the rope according to its diameter and condition; reverso modeThis multi-purpose belay/rappel device is lightweight and easy to use. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology. Reverso mode for belaying one or two seconds with assisted braking.Rope compatibility = single rope: ≥ 8.9 mm, half rope: ≥ 8 mm, twin rope: ≥ 7.5 mm. Weight: 77 g

GRIGRI 2 D14 2Belay device with assisted braking for 8.9 to 11 mm ropeThe GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. The GRIGRI 2 works equally well for lead climbing and top roping. It may be used on all single dynamic 8.9 to 11 mm ropes on the market (optimized for 9.4 mm to 10.3 mm ropes). Both compact and ultra-light, the GRIGRI 2 will accompany you on climbs around the world for many years. The GRIGRI 2 has a new design that allows excellent control during the descent.For use with single ropes between 8.9 and 11 mm. Weight: 185 g


Descenders

HUIT D02Figure 8 descenderFor descending on single or double ropes.Rope compatibility = single rope: 9 - 13 mm, half rope: 8 - 11 mm. Weight: 100 g

HUIT ANTIBRULURE D01Figure 8 descender with anti-burn gripAnodized version on the HUIT with anti-burn tab for holding the device when it is hot from a long or rapid descent.Rope compatibility = single rope: 9 - 13 mm, half rope: 8 - 11 mm. Weight: 110 g

PIRANA D05Descender for canyoningThe PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques.Rope compatibility = single rope: 9 - 13 mm, half rope: 8 - 11 mm. Weight: 90 g

Francois Damilano on “Poker d’as”, Mont-Blanc du Tacul, France

36 www.petzl.com 37

STOP D09Belay device with assisted braking for single ropeOne of the most popular devices for cave descents worldwide. Offers exceptional control and versatility, while the assisted braking function facilitates on-rope maneuvers.Rope compatibility on single ropes: 9 - 12 mm. Weight: 326 g

SIMPLE D04Single rope descenderThe SIMPLE descender is lightweight, compact, and does not twist the rope during descent.Rope compatibility on single ropes: 9 - 12 mm. Weight: 240 g

RACK D11Variable friction descender with braking barsThis rack updates the classic brake bar descender. The design and configuration of the bars makes it easy to set up and insert the rope. Compact and lightweight, the device allows the user to adjust the amount of friction during the descent to adapt to changing conditions (rope weight, terrain, etc.).Rope compatibility = single rope: 9 - 13 mm, half rope: 8 - 11 mm. Weight: 470 g

Via ferrata lanyards

SCORPIO EASHOOK L60 HRetractable Y-shaped lanyard with tearing energy absorber and EASHOOK connectorsThis via ferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung.Weight: 540 g

SCORPIO VERTIGO WL L60 WLRetractable Y-shaped lanyard with tearing energy absorber and VERTIGO WL carabinersThis via ferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung.Weight: 504 g


SCORPIO L60 2Retractable Y-shaped lanyard with tearing energy absorberThis via ferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung. Version without carabiners.Weight: 310 g

ZYPER VERTIGO L56 WLY-shaped lanyard with friction energy absorberA more basic alternative to the SCORPIO, the ZYPER absorbs the energy of a fall though the slippage of the dynamic rope through the metallic friction device. Comes equipped with a plastic clip to help keep the excess rope out of the way. Attaches easily to the harness with a simple lark’s head hitch. Available with carabiners.Weight: 588 g

ZYPER-Y L56Y-shaped lanyard with friction energy absorberA more basic alternative to the SCORPIO, the ZYPER absorbs the energy of a fall though the slippage of the dynamic rope through the metallic friction device. Comes equipped with a plastic clip to help keep the excess rope out of the way. Attaches easily to the harness with a simple lark’s head hitch. Available without carabiners.Weight: 395 g

KIT VIA FERRATA K29VVia ferrata kit containing ELIOS helmet, PANDION harness and SCORPIO VERTIGO WL lanyard with energy absorberEverything you need for your via ferrata adventures: - an ELIOS helmet (comes in two sizes: size 1: 48-56 cm, size 2: 53-61 cm) - a PANDION basic adjustable harness with equipment loop (one size: waistbelt 60-101 cm and leg loops < 67 cm) - a SCORPIO VERTIGO WL retractable Y-shaped lanyard with tearing energy absorber.

38 www.petzl.com 39

© Pascal Tournaire

Non-locking carabiners

ANGE S M57 G, M57 0Ultra-light, compact carabiner with MonoFil Keylock systemThe new generation ANGE S carabiner represents the middle ground between the traditional gate carabiner and the classic wire gate carabiner. It combines the fluidity of the spring gate with the lightness of the wire gate system. Petzl's MonoFil Keylock technology and the H-profile make the ANGE S carabiner weigh an ultra-light 28 grams and provide an optimal weight/strength ratio. So it is particularly suitable for users looking to reduce their weight to a minimum. The shape of the nose is designed to optimize clipping and unclipping.Strength = major axis: 20 kN, open gate: 9 kN, minor axis: 5 kN Weight: 28 g

ANGE L M59 G, M59 BLight carabiner with MonoFil Keylock systemThe new generation ANGE L carabiner represents the middle ground between the traditional gate carabiner and the classic wire gate carabiner. It combines the fluidity of the spring gate with the lightness of the wire gate system. Petzl's MonoFil Keylock technology and the H-profile make the ANGE L carabiner weigh a light 34 grams and provide an optimal weight-to-strength ratio. So it is particularly suited to users looking to reduce weight while keeping the functionality of a standard size carabiner. The shape of the nose is designed to optimize clipping and unclipping.Strength = major axis: 22 kN, open gate: 10 kN, minor axis: 7 kN Weight: 34 g

ANGE FINESSE M57D 10, M57D 17, M58D 17, M59D 17Quickdraw with ultra-light ANGE carabinersQuickdraws with ultra-light ANGE carabiners are available in four versions: - ANGE FINESSE 10 cm (ANGE S + ANGE S): designed to be the most compact and lightweight quickdraw, thanks to its two ANGE (size S, 63 g) carabiners - ANGE FINESSE 17 cm (ANGE S + ANGE S): offers greater versatility while keeping weight to a minimum (66 g) - ANGE FINESSE 17 cm (ANGE S + ANGE L): faster, easier clipping with the ANGE L on the rope end, and optimal weight with the ANGE S on the anchor end (72 g) - ANGE FINESSE 17 cm (ANGE L + ANGE L): designed for easier clipping with large or gloved hands, thanks to the very wide opening (26 mm) of the two carabiners, while keeping the quickdraw's weight to a minimum (78 g).

Pack 5 ANGE FINESSE M57P 10, M58P 17Packs of five quickdraws with ultra-light ANGE carabinersANGE FINESSE packs contain five ANGE FINESSE Dyneema® quickdraws equipped with MonoFil Keylock ANGE S or ANGE L carabiners.

FINESSE C39 10, C39 17Sewn sling with STRING S for quickdrawFINESSE sewn slings are ultra-light. They include the STRING S webbing protection on the rope end, to protect the webbing from abrasion while keeping the carabiner in position. They come in two lengths: 10 cm and 17 cm.C39 10: weight: 7 g C39 17: weight: 10 g

Carabiners

SPIRIT M15 AStraight gate carabinerSince its release in 1991 the SPIRIT has been considered the best carabiner on the market; no other carabiner has come close to topping its smooth action, perfect ergonomics and durability. The SPIRIT is made for clipping over and over again.Strength = major axis: 23 kN, open gate: 9.5 kN, minor axis: 10 kN Weight: 49 g

SPIRIT M10 ABent gate carabinerA bent gate SPIRIT. The perfectly curved gate and frame shape make clipping the rope a breeze.Strength = major axis: 23 kN, open gate: 9.5 kN, minor axis: 10 kN Weight: 49 g

Philippe Batoux on “Stracciatella” Nant de l’Enfer, France

40 www.petzl.com 41

EXPRESS C40Sewn sling with STRING for use as quickdrawThe EXPRESS is the perfect quickdraw for sport climbing. Its width makes it easy to grab on to. The STRING holds the carabiner in place for the rope end of the draw for easier clipping, and helps protect the end from abrasion. Three lengths to meet all your needs.C40 11: length: 11 cm, weight: 10 g C40 17: length: 17 cm, weight: 15 g C40 25: length: 25 cm, weight: 20 g

SPIRIT EXPRESS M30 11A - M30 17AEXPRESS quickdraw with SPIRIT straight and bent gate carabinersM30 11A = length: 11 cm, weight: 104 g M30 11A = length: 17 cm, weight: 109 g

OWALL M41Oval-shaped carabinerThe oval OWALL is a general purpose carabiner for trad and aid climbing. Ideal for racking wired nuts and other protection: gear doesn’t snag on the Keylock.Strength = major axis: 24 kN, open gate: 7 kN, minor axis: 10 kN Weight: 68 g

Locking carabiners

Am’D M34D-shaped locking carabiner for attaching devices to the harnessThe shape and size of this carabiner makes it great for most uses, from connecting a belay device to your harness to using it as a connector at the end of a lanyard. The D-shape makes it one of the strongest locking carabiners Petzl makes.Strength = major axis: 28 kN, open gate: 8 kN, cross-loaded: 7 kN Available with locking system: - SCREW-LOCK, weight: 78 g - BALL-LOCK, weight: 78 g - TRIACT-LOCK, weight: 74 g

WILLIAM M36Pear-shaped locking carabiner with wide opening for belay stations and belaying with Munter hitchA large carabiner can come in handy in many places. This one’s shape and size make it useful for belaying and rappelling with the Munter hitch with single or double ropes, anchoring multiple ropes and slings and keeping the belay station organized.Strength = major axis: 25 kN, open gate: 7 kN, minor axis: 7 kN Available with locking system: - SCREW-LOCK, weight: 90 g - BALL-LOCK, weight: 94 g - TRIACT-LOCK, weight: 88 g

Carabiners

ATTACHE 3D M38 SLUltralight compact pear-shaped locking carabinerThe original mini-HMS carabiner has been redesigned to be ultralight. The ATTACHE 3D has been reduced to a mere 55 g by removing all unnecessary material while maximizing the strength. The 3D shape keeps the original ATTACHE versatility while reducing weight. The rope bearing surfaces have been optimized to balance fluidity with a minimum of excess weight.Strength = major axis: 22 kN, open gate: 6 kN, minor axis: 7 kN Weight: 55 g

ATTACHE M35 SLCompact pear-shaped locking carabinerThe size and shape of this carabiner make it popular for many uses: connecting a belay device to a harness, belaying with a Munter hitch and using it as a multi-purpose carabiner at belay stations.Strength = major axis: 23 kN, open gate: 6 kN, minor axis: 7 kN Weight: 80 g

LOCKER SL M55 SLCompact and lightweight asymmetrical locking carabinerThis manual locking carabiner is compact and light. It is designed for climbing, mountaineering, canyoning, etc. The asymmetrical shape of the carabiner allows for a wide gate opening with excellent capacity and handling.Strength = major axis: 24 kN, open gate: 8 kN, minor axis: 9 kN Weight: 63 g

OK M33Oval-shaped locking carabinerMany pulleys need an oval-shaped carabiner to work properly. The OK carabiner is designed for just that. It is also very useful at belays.Strength = major axis: 24 kN, open gate: 7 kN, cross-loaded: 10 kN (M33 SL), 8 kN (M33 TL) Available with locking system: - SCREW-LOCK, weight: 75 g - TRIACT-LOCK, weight: 77 g

42 www.petzl.com 43© Ben Ditto

Special locking carabiners

FREINO M42Locking carabiner with friction spur for descendersFor those times when you need a little extra friction while descending, the FREINO is the way to go.Strength = major axis: 25 kN, open gate: 9 kN, minor axis: 10 kN Weight: 85 g

VERTIGO WL M40 WLLocking carabiner for via ferrataThe VERTIGO WL is designed to be used at the end of a via ferrata lanyard. Its ergonomic design and easy-to-use locking system facilitate passing intermediate anchors. The wide opening can fit over most bars and cables.Strength = major axis: 25 kN, open gate: 8 kN, minor axis: 10 kN Weight: 97 g

OMNI M37Semi-circle carabiner for fastening a harnessThe half-moon OMNI is used to close harnesses that have two attachment points that must be joined with a connector. It has a breaking strength of at least 15 kN when loaded in any direction.Strength = major axis: 20 kN, open gate: 7 kN, minor axis: 15 kN Available with locking system: - SCREW-LOCK, weight: 86 g - TRIACT-LOCK, weight: 92 g

Carabiner accessories

STRING M90000 L, M90000 XLSewn webbing protection for keeping carabiner in positionThe STRING serves two functions: it holds the rope end carabiner in place on the rope end of a quickdraw or sling and it protects a relatively high wear area of the sling. Available in two sizes for webbing between 15 and 30 mm wide.

STRING S M91000Protects webbing (10 mm) and keeps carabiner in placeThe STRING S has two functions: it holds the rope end carabiner in place and helps protect the webbing from abrasion. The STRING S is suitable for 10 mm quickdraws.

NITRO 3 67800Energy absorber for use as quickdrawFor dubious protection when ice, mixed and traditional climbing.

Carabiners

Sean Villanueva-O’Driscall powering through the crux pitch of “Devil’s Brew”, Sortehul Fjord, North West Greenland

44 www.petzl.com 45© Monica Delmasso

Ice climbing

ERGO U22High-end dry tooling and ice climbing axeThe ERGO is the ultimate tool for the most difficult dry tooling pitches and the most unlikely ice columns. The ultra-curved shaft offers exceptional clearance under the head and allows a wider repertoire of movement. The adjustable ergonomic handle allows multiple grip positions and limits the risk of pick shift when switching hands. The strong curve of the handle creates an ideal angle for prolonged suspensions and significantly increases power when pulling.DRY pick (type T), shaft type T, weight: 645 g

NOMIC U21 2Dry-tooling and ice climbing toolThe NOMIC allows the entire rock climbing repertoire to be transferred to ice. Thanks to its adjustable ergonomic handle, it offers multiple grip modes and limits the risk of snagging when switching hands. The ICE pick allows easy penetration in any type of ice, and pulls out easily. The modular head has two removable pick weights to balance the axe and propel it into the ice with an exceptional swing. The NOMIC can also be equipped with a hammer when placing pitons.ICE pick (type T), type T shaft, weight: 605 g

QUARK U19 M2, U19 P2Ice axe for technical mountaineering and ice climbingThe QUARK is a versatile ice axe, designed primarily for technical mountaineering and for ice climbing. Because of the head's modular construction, it adapts to any situation. The QUARK is easy to use: its balance and its ICE pick allow solid placements on any type of ice. Hooking is more efficient, thanks to the clearance under the head and to the shape of the pick. The GRIPREST and the TRIGREST hand rest ensure a comfortable, powerful grip adapted to leashless climbing.ICE pick (type T), type T shaft, weight: 550 g

Ice axes

François Damilano in the Mont Blanc du Tacul Triangle, France

46 www.petzl.com 47

Technical mountaineering

AZTAREX U11 P, U11 MLightweight multi-purpose ice toolThe AZTAREX excels in situations where every gram counts, but where there is no room for compromise. Perfect for technical, fast-and-light mountaineering. The hand rest provides extra support and allows the tool to be used leashless. When not needed, it can be removed and stored in the shaft so as not to interfere when plunging the tool in snow. The included BLUEICE pick is designed for hard ice and hooking. Available in adze and hammer versions.Type T shaft, length: 50 cm, weight: 500 g U11 P: AZTAREX adze version, U11 M: AZTAREX hammer version

SUM’TEC U15Lightweight, technical classic mountaineering ice axeThe logical evolution of the classic mountaineering ice axe, the SUM’TEC combines the qualities of a technical mountaineering ice axe - thanks to its curved shaft - and a classic mountaineering ice axe. Light and versatile, this ice axe has an adjustable hand rest and an interchangeable pick.Shaft: type T U15 52 = length: 52 cm, weight: 485 g, U15 59 = length: 59 cm, weight: 505 g

Classic mountaineering

SUMMIT U13Classic modern mountaineering ice axeThe SUMMIT is designed for the modern practice of classic mountaineering. A result of the expertise acquired over many years, this product applies a new technical approach to this category of ice axes. The curved shaft provides the necessary clearance on steep or icy terrain. The light, forged steel head attached to the shaft ensures minimum weight and maximum efficiency.Type B shaft U13 52 = length: 52 cm, weight: 495 g, U13 59 = length: 59 cm, weight: 535 g, U13 66 = length: 66 cm, weight: 570 g

Glacier travel

SNOWALKER U01Glacier touring ice axeThe SNOWALKER is the lightweight Petzl Charlet ice axe designed for glacier travel and easy snow slopes. The steel pick performs even in hard snow and ice. The wide adze chops steps efficiently and provides a comfortable weight-bearing surface. The anodized shaft is made of high quality, durable 7075 aluminum. RANDO leash included. Pick equipped with hole for clipping a carabiner or attaching a sling.Type B shaft U01 60 = length: 60 cm, weight: 415 g, U01 68 = length: 68 cm, weight: 438 g, U01 75 = length: 75 cm, weight: 458 g

SNOWRACER U02 50AFeatherweight axe with steel head for ski mountaineering and lightweight expeditionsThe 50 cm ultra-lightweight (340 g) SNOWRACER is the perfect choice for ski mountaineering, snowboarding steep chutes and fast and light climbing. Features the same pick and adze as the SNOWALKER for high performance use in snow and ice. The aluminum shaft with beveled tip is plugged to prevent snow build-up in the shaft.Type B shaft Length: 50 cm, weight: 340 g

Ice axes

SNOWSCOPIC U03 ATelescoping trekking pole / ice axe for approaches and easy snow climbsCombining a telescoping trekking pole and a fully-functioning ice axe, the SNOWSCOPIC is the only piece of equipment you will need for trekking, approaches and easy snow climbs. Extend the bottom section for use as a handy trekking pole; shorten it when the going gets steeper. Steel pick; adze designed for comfortable grip. Equipped with a carbide tip.Type B shaft Length: 65 - 105 cm, weight: 450 g

Ice axe accessories

DRY U19 DRYPick for dry tooling for QUARK (U19 M2), NOMIC (U21 and U21 2) and ERGO (U22)The DRY pick (4 mm thick) is specifically designed for dry tooling and extreme ice climbing. Tapered at the tip (3 mm), it penetrates the coldest ice easily. It has teeth on the lower part for hooking and on the upper part for reverse positions.Weight: 129 g

ICE U19 ICEPick for ice or mixed climbing for QUARK (U19 M2), NOMIC (U21 and U21 2) and ERGO (U22)The ICE is an ultra-versatile pick designed for ice climbing. Tapered at the tip (3 mm), it penetrates the coldest ice easily. Its shape ensures stable hooking and easy unhooking on ice and rock.Weight: 129 g

ALPIX U15AALSpare pick for SUM’TECIts curved shape tapers at the tip for precise, solid purchase, and its re-curved shape makes it easy to remove.Weight: 115 g

BLUEICE U92000Ice climbing pick for AZTAR and AZTAREXThis pick for the AZTAR or AZTAREX is designed for general purpose climbing on almost all terrains: snow, ice and rock.Weight: 131 g

QUATRO U93000Dry tooling pick for AZTAR, AZTAREXThe 4 mm QUATRO for the AZTAR or AZTAREX is an extra durable pick designed mainly for mixed climbing and mountaineering.Weight: 136 g

ADZE U19 PANAdze for QUARK (U19 M2), NOMIC (U21 and U21 2) and ERGO (U22)Wide adze for easily clearing ice or cutting steps or a platform.Weight: 69 g

48 www.petzl.com 49© Pascal Tournaire

HAMMER U19 MARHammer for QUARK (U19 M2), NOMIC (U21 and U21 2) and ERGO (U22)The trapezoidal shape of this hammer's contact surface is specifically designed for ice climbing axes. Compatible with QUARK ice axes (starting in fall 2010), ERGO and all versions of the NOMIC.Weight: 58 g

TRIGREST U19 TRIAdjustable hand rest for QUARK (U19 M2), NOMIC (U21 and U21 2) and ERGO (U22)The TRIGREST hand rest is adjustable in height, without tools, on the shaft or the handle. It has two support positions: a brace for hand switching in the high position, and a brace for the index in the low position. The latter increases grip strength for leashless climbing and improves planting precision. The TRIGREST may also be used in a fixed position, without the index support.Weight: 19 g

CLIPPER U80000Quick attach leash for ice climbingThis comfortable leash with foam padding easily detaches from the axe for times when you need to have your hands free to place screws, etc. The innovative clip securely attaches the leash to to the tool, and is quick to detach and reattach. The strap is simple to adjust and stays on the wrist while unattached to the tool. Compatible with QUARK and NOMIC axes.Weight: 62 g

FREELOCK U81000Fixed leash for ice climbingThe lightweight and comfortable FREELOCK is designed with technical alpine climbing in mind. The leash is tightened and loosened with a simple turn of the wrist.Weight: 40 g

RANDO U82000Basic webbing leashAttaches to the shaft of a basic ice axe.Weight: 26 g

REGLABLE 68504Adjustable leashThis leash is equipped with a buckle that allows it to be adjusted depending on the length of the tool and the climber’s preference. Can be attached to all axes equipped with a hole in the shaft or the head.Weight: 38 g

GRIPTAPE U21700Grip tapeCustomize your tools with this rubber grip tape for improved grip and thermal insulation.Length: 1 m, width: 19 mm

PICK AND ADZE GUARD 68402Covers pick and adze to help prevent damage and/or injury during transport.

FLAT SPIKE GUARD 68395Covers the spike to help prevent damage and/or injury during transport.

ROUND SPIKE GUARD 68401Covers the spike to help prevent damage and/or injury during transport.

Ice axes CramponsIce climbing

DART T22Mono-point crampon for ice and mixed climbingThe DART is the crampon for extreme mixed and ice climbing. The mono-point is designed to displace less ice and make for precise placements on micro-edges. The third row of points are angled towards the rear for hooking in steep terrain or around ice columns.11 points T22LLF 02 = LEVERLOCK FIL binding, weight (without ANTISNOW): 2 x 412 g = 824 g T22SL 02 = SIDELOCK binding, weight (without ANTISNOW): 2 x 408 g = 816 g

DARTWIN T21Dual-point crampon for ice and mixed climbingA version of the DART for those who prefer the added stability and holding power of two front points.12 points T21LLF 02 = LEVERLOCK FIL binding, weight (without ANTISNOW): 2 x 432 g = 864 g T21SL 02 = SIDELOCK binding, weight (without ANTISNOW): 2 x 430 g = 860 g

M10 LLF T23 LLF 02Modular crampon for ice and mixed climbingFor climbers who want the option to switch between mono or dual-point crampons, the M10 is for you. The replaceable forged front points can be configured asymmetrically or symmetrically for customized precision performance. The LEVERLOCK FIL binding system is easy to adjust and fits most boots with toe welts.14 points, LEVERLOCK FIL binding, weight (without ANTISNOW): 2 x 525 g = 1050 g

Philippe Batoux on “Papa ou Pa?” Nant de l’Enfer, Savoie, France

50 www.petzl.com 51

Technical mountaineering

SARKEN T10Technical mountaineering cramponsThe SARKEN have been modified for improved durability and are better than ever. This is the crampon for anybody headed out into variable, mixed terrain. The 4x4 of crampons. The “T”-shaped front points are designed for excellent penetration in hard ice and stable front pointing on mixed terrain while providing solid purchase in snow and neve.12 points T10SL 22 = SIDELOCK binding, weight (with ANTISNOW): 2 x 475 g = 950 g T10SPL 22 = SPIRLOCK binding, weight (with ANTISNOW): 2 x 480 g = 960 g T10LL 22 = LEVERLOCK binding, weight (with ANTISNOW): 2 x 505 g = 1010 g T10LLFL 22 = LEVERLOCK FIL binding, weight (with ANTISNOW): 2 x 484 g = 968 g

Classic mountaineering

VASAK T05Classic 12-point mountaineering cramponVASAK crampons are designed for general purpose mountaineering. Twelve points ensure maximum traction in all conditions, whether you are climbing up steep slopes or ice couloirs. Available in all four lightweight binding systems for solid boot interface.12 points T05SPL 02 = SPIRLOCK binding, weight (with ANTISNOW): 2 x 465 g = 930 g T05SFL 02 = FLEXLOCK binding, weight (with ANTISNOW): 2 x 470 g = 940 g T05SLL 02 = LEVERLOCK binding, weight (with ANTISNOW): 2 x 490 g = 980 g T05SLLF 02 = LEVERLOCK FIL binding, weight (with ANTISNOW): 2 x 460 g = 920 g

IRVIS T0310-point crampon for ski touring and glacier travelAt 810 g per pair (SIDELOCK), the 10-point IRVIS crampons are designed for glacier travel, ski mountaineering and snowy or icy approaches. They are lightweight and easy to use, making them a favorite in any conditions. Available with three different binding systems, these crampons can fit most boots, even those without welts. Durable and easy to adjust.10 points T03LL 02 = LEVERLOCK binding, weight (with ANTISNOW): 2 x 438 g = 876 g T03SL 02 = SIDELOCK binding, weight (with ANTISNOW): 2 x 405 g = 810 g T03FL 02 = FLEXLOCK binding, weight (with ANTISNOW): 2 x 410 g = 820 g

CramponsCrampon accessories

FAKIR V01Carrying bag for cramponsDesigned for carrying crampons, this zippered nylon compartment is also great for screws, extra picks, etc. Reinforced, semi-rigid bottom protects your pack from sharp tips. Featuring a mesh top panel which allows water to escape and your equipment to dry, and an internal strap which keeps the crampons in place.Weight: 155 g

ANTISNOWAnti-bott systemThese durable, dual density plates securely attach to all Petzl Charlet crampons to help prevent potentially dangerous underfoot snow buildup. The low profile design doesn’t reduce the projection of the points. There is an ANTISNOW specifically designed for each Petzl Charlet crampon.DART/DARTWIN: T21 900, M10: T23 900, VASAK/SARKEN: T05960, IRVIS: T03960, ECRIN: 68505, ARGENTERO: 68517

BARRETTES L T20850Long linking bar for sizes 41 to 50Replacement linking bars for sizes 41 to 50; adjustable for half-sizes.Weight: 120 g

LONG CURVED LINKING BARS T10950Long linking bar for asymmetric bootsReplacement linking bar for boots with very asymmetric footprint. Adjustable to the half size.Weight: 120 g

TELEMARK TOE BAIL WIRE T03600Toe bail for telemark bootsReplaces the standard toe bail on Petzl Charlet crampons to make them compatible with telemark boots. Designed so the boot won’t interfere with the front points.For SIDELOCK and LEVERLOCK FIL binding systems Weight: 35 g

Special purpose crampons

CRAB 6 641606-point cramponsThese instep crampons are compatible with most sturdy shoes and boots. Lightweight and compact for use in snowfields. Great accessory for trekking and approaches.Weight: 400 g

SPIKY PLUS 79510, 79520, 79530

Anti-slip solesPut these over any pair of shoes or boots for added traction on icy, slippery surfaces.

52 www.petzl.com 53

© John Evans

Ascenders

ASCENSION B17SLN, B17SRGErgonomic handled ascenderOur handled ascenders have been refined to provide greater comfort, efficiency, ease of use. The ergonomically shaped handle is over molded with dual density grip for greater friction and better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminum frame ensures optimal handle orientation when the device is loaded and will maintain solid, comfortable performance for ascents of any length.For use with ropes between 8 and 13 mm in diameter: 195 g

CROLL B16AAAVentral ascenderWhen used with a chest strap and the ASCENSION or BASIC rope clamps, the CROLL makes for a simple and efficient system for ascending fixed lines. The angled attachment hole keeps the device properly aligned on the chest.For use with ropes between 8 and 13 mm in diameter: 130 g

PANTIN B02ALA, B02ARAFoot ascender - left and right foot versionsUsing the PANTIN with a CROLL and ASCENSION keeps the body in a more upright position when ascending fixed ropes, making for faster and less tiring vertical progress. Available in both LEFT and RIGHT footed versions. The frame has been refined to decrease friction and allow the device to glide easily on the rope.For use with ropes between 8 and 13 mm in diameter: 120 g

FOOTAPE C47Adjustable webbing foot loopWeight: 76 g

FOOTCORD C48Adjustable cord foot loop for cavingWeight: 45 g

Ascenders

Multi-purpose ascenders

BASIC B18AAAMulti-purpose lightweight ascenderA lightweight, compact multi-purpose ascender that works perfectly for hauling systems, ascending fixed lines and for self-protection when climbing with a fixed rope.For use with ropes between 8 and 13 mm in diameter: 135 g

SHUNT B03Back-up ascenderUsed below the rappel device, the SHUNT works as a rappel back-up and replaces self-jamming knots like the Prusik. Works on single and double ropes.For use on single 10-11 mm ropes or double 8-11 mm ropes, weight: 188 g

MICROCENDER B54Compact and lightweight ascenderThis multi-purpose ascender can be used on fixed ropes or in hauling systems.For use with ropes between 8 and 13 mm in diameter: 162 g

TIBLOC B01Compact emergency ascenderIn a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Use with the ULTRALEGERE pulley for an ideal lightweight, compact emergency hauling kit.For use with ropes between 8 and 11 mm in diameter: 39 g

Mike Fuselier on Venus de Jilo (8b+), Petzl Roc Trip Mexico

54 www.petzl.com 55

Single pulleys

ULTRALEGERE P00APulley for occasional useThe ULTRALEGERE is a simple nylon sheave that can be installed on a carabiner.Rope compatibility on single ropes: 7 - 13 mm. Weight: 10 g

OSCILLANTE P02ASwing-sided pulley for emergency useThe OSCILLANTE weighs practically nothing and can be used in crevasse rescue systems or improvised hauling systems.Rope compatibility on single ropes: 7 - 11 mm, efficiency: 71 %, weight: 42 g

FIXE P05SOPulley with fixed side platesThe FIXE pulley is lightweight, compact, and quick to install on the rope. It offers a good balance between weight and strength.Rope compatibility on single ropes: 7 - 13 mm, efficiency: 71 %, weight: 90 g

PARTNER P52ACompact pulley with swinging side platesThe PARTNER pulley is compact and light, yet ensures excellent efficiency thanks to its aluminum sheave mounted on sealed ball bearings.Rope compatibility on single ropes: 7 - 11 mm, efficiency: 91 %, weight: 56 g

RESCUE P50AUltra-strong pulley with swinging side platesThe RESCUE pulley is very strong and efficient: ideal for rescue, hauling heavy loads and intensive use.Rope compatibility on single ropes: 7 - 13 mm, efficiency: 95 %, weight: 185 g

Prusik pulleys

MINI P59ALightweight Prusik pulleyThe lightweight MINI can handle big loads, but is small enough to go almost anywhere or be carried on the harness.Rope compatibility on single ropes: 7 - 11 mm, efficiency: 91 %, weight: 80 g

GEMINI P66ADouble Prusik pulleyThe GEMINI double pulley is equipped with an auxiliary attachment point for use in technical hauling systems.Rope compatibility on single ropes: 7 - 11 mm, efficiency: 91 %, weight: 135 g

PulleysProgress capture pulleys

MINI TRAXION P07Compact and lightweight self-jamming pulley.The compact MINI TRAXION has three distinct modes of operation (pulley, progress capture pulley, ascender), making it the ideal companion for extended vertical adventures. Use it for hauling light loads, self-belay, ascending a rope and self-rescue.Rope compatibility on single ropes: 8 - 13 mm, efficiency: 71 %, weight: 165 g

PRO TRAXION P51Very efficient progress capture pulley.The PRO TRAXION is designed for hauling heavy loads and is ideal for aid climbing and rescue.Rope compatibility on single ropes: 8 - 13 mm, efficiency: 95 %, weight: 265 g

Transport pulleys

TANDEM P21Double pulley for use with ropesThe TANDEM is designed for smooth and efficient Tyrolean traverses on rope.Rope compatibility on single ropes: ≤ 13 mm, efficiency: 71 %, weight: 195 g

TANDEM CABLE P21 CABDouble pulley for use with ropes and cablesThe TANDEM CABLE is designed for smooth and efficient Tyrolean traverses on rope.Rope compatibility on single ropes: ≤ 13 mm, cables ≤ 12 mm, efficiency: 71 %, weight: 258 g

TANDEM SPEED P21 SPEEfficient double pulley for use on ropes and cablesThe TANDEM SPEED is the fastest of the transport pulleys and is specifically designed for lower-angle tyroleans.Rope compatibility on single ropes: ≤ 13 mm, cables ≤ 12 mm, efficiency: 91 %, weight: 270 g

Crevasse rescue kit

CREVASSE RESCUE KIT K25 SC2Kit containing the equipment needed for hauling/ascending in crevasse rescue situations: MINI TRAXION pulley, two OK SCREW-LOCK carabiners, TIBLOC, OSCILLANTE pulley, 120 cm ST’ANNEAU slingThe crevasse rescue kit contains everything needed for setting up a hauling system or a rope ascent in case of a fall into a crevasse. Before putting the gear onto his harness, the user can make sure that he has everything, thanks to the printed visuals on the inside of the storage bag. This kit is essential for glacier travel (on skis or on foot).Rope compatibility on single ropes: 8 - 13 mm. Weight: 585 g

56 www.petzl.com 57© Jocelyn Chavy

PacksClimbing pack

BUG S71Backpack for single day multi-pitch climbingThe BUG was designed specifically for multi-pitch, long routes that are done in a single day. Its rounded rectangular shape maximizes volume and minimizes interference while in use. The volume is ideal for carrying gear on the approach and when climbing (hydration system, food, clothing, shoes, etc). Everything has been designed for maximum comfort while climbing with the BUG on the back: minimal bulk, shoulder straps allowing freedom of arm movement, comfortable and ventilated back panel, foldaway waistbelt, high positioning allows access to back of harness (for chalkbag, gear), lateral compression straps.Volume: 18 liters, weight: 570 g

Caving packs

TRANSPORT C02Large capacity comfortable caving packComfortable backpack for use on long approaches and in large underground networks.Volume: 45 liters, weight: 1050 g

PORTAGE S32Large capacity caving packLarge capacity bag for approaches and all caving use.Volume: 35 liters, weight: 760 g

CLASSIQUE C03Medium capacity caving pack with round baseVolume: 22 liters, weight: 600 g

PERSONNEL C14Small caving packVolume: 15 liters, weight: 470 g

Canyoning packs

ALCANADRE S64Comfortable canyoning packBag designed for canyoning including the approach.Volume: 37 liters, weight: 700 g

ARTUBY S63Canyoneering packVolume: 22 liters, weight: 520 g

Georges Aureau descending the Alloix Canyon, Chartreuse, France

58 www.petzl.com 59

Chalk bags, chalk

BANDI S38 PClassic cylinder shaped chalk bagThe BANDI's classic round shape with reinforced large opening allows for easy access. The soft fabric is pleasant to the touch (like a peach) and won’t cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

KODA S39 PChalkbag with ergonomic shapeThe KODA's ergonomic shape allows easy access to the chalk. The soft fabric is pleasant to the touch (like a peach) and won’t cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

KODAPOCHE S40 PErgonomically shaped chalk bag with pocketThe KODAPOCHE is a variation of the KODA chalkbag with a baffled pocket perfect for storing your keys, spare change, a granola bar, a small e+LITE headlamp, or topo map without risk of loss due to the zipper and weather resistant flap. The ergonomic shape makes it easy to access the chalk. The soft fabric is pleasant to the touch (like a peach) and won’t cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

POWER CRUNCH P22B 25, P22B 100, P22B 200Chunky chalkPetzl’s POWER CRUNCH chalk is available in three sizes (25 g, 100 g, and 200 g), convenient for every climber. The small 25 g size is the perfect amount for a day at the crag or a session at the gym. The 100 g size is big enough to fill a chalkbag with some left over for a refill. The 200 g is ideal for those with chalk hungry hands who never seem to have enough chalk to get through a tough summer day of climbing.

Rescue litter

NEST S61Rescue litter for cave rescueLitter developed in partnership with the French national cave rescue organization.Dimensions: 190 x 50 x 5 cm, weight: 11.5 kg

Packs AnchorsIce protection

LASER SONIC P70Ice screw with integrated handleFor rapid ice protection, there is nothing faster than the LASER SONIC. The innovative hanger/handle makes placing the screw a breeze. The design also allows the screw to be removed when still attached to the rope, helping to prevent accidental loss.

LASER P71Ice screwLighter weight and simpler version of the LASER SONIC. Designed for use with the TURBINE crank for quick placements.

Ice protection accessories

TURBINE 65050Crank for ice screwsCrank for placing and removing LASER ice screws.

ICEFLUTE V10Protective ice-screw holderThis holder protects five ice screws from damage and protect the climber from the screws’ sharp edges. Securely holds screws and allows for quick, one-handed use. Can be attached directly to a harness or worn on the chest.

SNOWTUBE 68810, 68820Snow anchorPlanted or buried as a dead-man, the SNOWTUBE can be used for a variety of purposes: anchoring a fixed line, staking out a tent, etc. Available in three lengths.

HAND HOOK 64801Suspension hook for ice and mixed climbing

MULTIHOOK 04950Multipurpose hook

NITRO 3 67800Energy absorber for use as quickdraw

Rock anchors

V CONIQUE 66007, 66011Chromoly steel channel pitonHard chromoly steel piton for flared, rounded cracks in granite and hard rocks.

ROCHER MIXTE 65106, 65108, 65110Semi-hardened steel forged pitonPiton for thin, parallel-sided cracks in limestone or granite.

UNIVERSEL 65406, 65408, 65410Semi-hardened steel forged pitonPiton for flared cracks in limestone or granite.

U 65312, 65314Semi-hardened steel forged pitonPiton for wide cracks in limestone or granite.

LIVANOS 65504, 65506, 65508, 65510Chromoly steel channel piton

COEUR P34050, P38150Multi-directional stainless steel bolt hanger

COEUR GOUJON P32, P33Complete anchor assemblyComprised of a COEUR hanger, expansion bolt and nut.

BAT’INOX P5714 mm resin anchorEspecially suited for soft rock.

AMPOULE BAT’INOX P41Resin glue for BAT’INOXRequired for placing the BAT’INOX anchor.

60 www.petzl.com 61

Anchors AccessoriesRock anchors

COLLINOX P5510 mm resin anchorDesigned for long-term installation.

AMPOULE COLLINOX P56Resin glue for COLLINOXRequired for placing the COLLINOX anchor.

Caving anchors - maillons

VRILLEE P13Caving bolt hanger

COUDEE P04Caving bolt hangerHolds the carabiner perpendicular to the rock: helps keep the rope away from the rock.

CHEVILLE AUTOFOREUSE P12Self-drilling expansion bolt anchor

DELTA P11Triangular maillon

SPEEDY P14Maillon with rapid gate

PRESTO P10Maillon with wide rapid gate

GO P15Oval maillon

DEMI ROND P18Semi-circular maillon

Rock and caving anchor accessories

BONGO P27Piton hammerFor trad climbing, aid climbing or for equipping new routes.

TAM TAM P16Caving hammerDesigned for placing bolt anchors with a hand drill.

ROCPEC P26SDS-bit hand drillHand drill that accepts SDS drill bits.

ROCPEC ADP P26250Adaptor for ROCPEC drillIncreases the ROCPEC’s versatility and provides greater comfort and efficiency when placing 12 mm self-drilling expansion bolts.

PERFO SPE P08Drill for self-drilling anchors

BOLTBAG C11 ABolting equipment pouch

PROTEC C45Rope protectorHelps protect the rope from sharp edges.

SWIVEL S P58 SBall bearing swivelPositioned between the rope and the load, the swivel allows the load to turn without twisting the rope.

PAW S P63 SRigging plateFor organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses.

Gloves

CORDEX K52Lightweight belay/rappel gloves

CORDEX PLUS K53Lightweight belay/rappel gloves

Sewn slings

ANNEAU C40Polyester slingTo set up a belay or an anchor, or to extend an anchor point.

ST’ANNEAU C07Dyneema slingA lighter alternative to the all-nylon slings, these are color coded for ease in length identification.

FIN’ANNEAU C06Ultralight Dyneema slingThe lightest and most compact of all our slings, we use 8 mm Dyneema/nylon webbing to cut down on weight without sacrificing strength.

Aid climbing accessories

FIFI V12Positioning hook for aid climbingHook for positioning, progression and haul bag retrieval.

MAILLON RAPIDE N° 5 P49100Quick link for installing a retrieval system on the FIFI hookAttaches to the slot of the FIFI in order to connect to a lanyard.

GOUTTE D’EAU P06Large radius progression hook

REGLETTE P06 SSmall radius progression hook

QUICKSTEP C09Adjustable single-step etrier for aid climbing

WALLSTEP C017-step etrier for aid climbing

LOOPING C254-step etrier for aid climbing

GRADISTEP C08Lightweight 5-step etrier for aided sections on free climbs

QUICKFIX C09100Adjustable positioning sling for aid climbing

Other accessories

SPATHA S92 S, S92 LKnife with carabiner holeCan be attached to a harness or a bag, making it difficult to lose.

CARNET S90, S91Topographic notebook for caving

64 www.petzl.com 65© Tony Lamiche

E93 AEU E93 AUSE93 AUK

HeadlampsSignal / emergency headlamps

SiGNAL E05 PVersatile red safety flasherThe SiGNAL safety light allows the user to be visible from a distance. It emits a red light, in either continuous or strobe mode. The 180º multidirectional beam guarantees optimum visibility from up to one kilometer away. The elastic band and clip allow many options for attachment: on the headband of another headlamp, around the arm, on a pack, etc. The SiGNAL light is an essential part of any safety equipment for nighttime activities. It also adapts to every-day activities: going to work or school before dawn, etc.Beam type: wide; burn time (economic mode): 120 h; weight on the head: 22 g

E+LITE® E02 P2Headlamp for emergency situationsThe e+LITE headlamp is designed for any situation. It is ultra-lightweight, comes in a hard case and can easily be stored with its batteries in a backpack, jacket, or emergency kit for up to 10 years. It provides white or red lighting in continuous or strobe mode and can easily be attached with its elastic band and clip. For emergencies, the e+LITE is equipped with a long-range whistle that can signal one's position for rescue (SOS Morse code illustration on the whistle).Light quantity: 16 lumens (maximum mode), beam type: wide, distance: 19 m (maximum mode), burn time: 45 h (economic mode), weight on the head: 28 g

TIKKA2 - ZIPKA2 series headlamps

TIKKINA®2 E91 PE, E91 PF, E91 PL, E91 POTwo LED headlamp with two lighting levelsThe TIKKINA2 headlamp is designed to meet most everyday lighting needs. It has two lighting modes (maximum and economic) to adapt light quantity to the situation. It is also equipped with new, improved performance LEDs and a push-button switch. The compartment now has an easy-to-use system that allows the user to very easily change the batteries or to equip the headlamp with the ADAPT mounting system.Light quantity: 23 lumens (maximum mode), beam type: wide, distance: 23 m (maximum mode), burn time: 190 h (economic mode), weight on the head: 80 g, CORE battery available as accessory

TIKKA®2 E93 PS, E93 PTFour LED headlamp, three lighting modes (two continuous and one flashing)The TIKKA2 offers great versatility with its three lighting modes (maximum, economic and strobe) which are accessed by a simple electronic push-button switch. In maximum mode, the four LEDs deliver 40 lumens of light and provide enough light to see over a distance of 29 meters. The economic mode optimizes battery life and therefore provides a long burn-time of up to 120 hours. The battery compartment is now hinged for easier access along with an easier to use closure system.Light quantity: 40 lumens (maximum mode), beam type: wide, distance: 29 m (maximum mode), burn time: 120 h (economic mode), weight on the head: 81 g, CORE battery available as accessory

TIKKA®2 CORE E93 AEU, E93 AUK, E93 AUSFour LED headlamp, three lighting modes with CORE battery and standard USB wall chargerDesigned for regular use, the TIKKA2 CORE headlamp offers great versatility with its CORE Lithium Ion Polymer battery and its three lighting modes (maximum, economic and strobe) which are accessed by a simple electronic push-button switch. With the OS by Petzl software (download at www.petzl.com), the user can customize headlamp performance in a number of ways to adapt the lighting intensity or battery life to the type of activity.Light quantity: 35 lumens (maximum mode), beam type: wide, distance: 29 m (maximum mode), burn time: 60 h (economic mode), weight on the head: 76 g

ZIPKA®2 E94 PS, E94 PTUltra-compact four LED headlamp with retractable cord, three lighting modes (two continuous and one strobe)The ultra-compact ZIPKA2 headlamp is equipped with the ZIP retractable cord system. This feature allows the headlamp to be worn on the head or wrist, or attached to any other support, like a tent pole, etc. This headlamp is extremely versatile, thanks to its three lighting levels (maximum, economic and strobe), which are accessed with a simple electronic push-button switch. In maximum mode, the four LEDs deliver 40 lumens of light and provide enough light to see over a distance of 29 meters. In economic mode, the lifetime of the batteries can be extended to up to 120 hours for a long burn-time. The battery compartment is now hinged for easier access along with an easier to use closure system.Light quantity: 40 lumens (maximum mode), beam type: wide, distance: 29 m (maximum mode), burn time: 120 h (economic mode), weight on the head: 69 g, CORE battery available as accessory

Francois Lombard & Remy Fabregues cross-training in the streets of Chamonix-France

66 www.petzl.com 67

E99 AEU E99 AUSE99 AUK

Headlamps

TIKKA PLUS®2 E97 PM, E97 PPHeadlamp with one high-output LED, one red LED and five lighting modes (three continuous and two strobe)The TIKKA PLUS2 headlamp integrates two light sources for versatility: one white, high-output LED and one red LED. The white LED delivers 50 lumens in maximum mode and lights up to 35 meters. In economic mode, it can reach a burn-time of 140 hours. The red LED provides spare lighting to preserve night vision or to become a strobe light for increased safety, for example in an urban environment, etc. The TIKKA PLUS2 can be used with lithium batteries to decrease weight or increase performance in cold weather.Light quantity: 50 lumens (maximum mode), beam type: wide, distance: 35 m (maximum mode), burn time: 140 h (economic mode), weight on the head: 83 g, CORE battery available as accessory

TIKKA PLUS®2 ADAPT E97 PMAHeadlamp with one high-output LED, one red LED and five lighting modes (three continuous and two strobe) and ADAPT systemThe TIKKA PLUS2 ADAPT headlamp is designed for someone wanting to use the headlamp on different mounts with the ADAPT system. This system allows the user to attach the light body of the headlamp to different mounts: on the elastic headband, a rigid surface (helmet, etc.), or to clip it on a belt, a pocket, etc. This headlamp integrates two light sources for versatility: one white high-output LED and one red LED. The white LED delivers 50 lumens in maximum mode and lights up to 35 meters. In economic mode, it can reach a burn-time of 140 hours. The red LED provides spare lighting to preserve night vision or to become a strobe light for increased safety, for example in an urban environment, etc. The TIKKA PLUS2 ADAPT can be used with lithium batteries to decrease weight or increase performance in cold weather.Light quantity: 50 lumens (maximum mode), beam type: wide, distance: 35 m (maximum mode), burn time: 140 h (economic mode), weight on the head: 101 g, CORE battery available as accessory

ZIPKA® PLUS2 E98 PM, E98 PPUltra-compact headlamp with retractable cord, one high-output LED, one red LED and five lighting modes (three continuous and two blinking)The ultra-compact ZIPKA PLUS2 headlamp is equipped with the ZIP retractable cord system. This feature allows the headlamp to be worn on the head or wrist, or attached to any other support, like a tent pole, a bicycle seat post, etc. This headlamp integrates two light sources for versatility: one white, high-output LED and one red LED. The white LED delivers 50 lumens in maximum mode and lights up to 35 meters. In economic mode, it can reach a burn-time of 140 hours. The red LED provides spare lighting to preserve night vision or to become a strobe light for increased safety, for example in an urban environment, etc. The ZIPKA PLUS2 can be used with lithium batteries to decrease weight or increase performance in cold weather.Light quantity: 50 lumens (maximum mode), beam type: wide, distance: 35 m (maximum mode), burn time: 140 h (economic mode), weight on the head: 71 g, CORE battery available as accessory

TIKKA XP®2 E99 PG, E99 PIHeadlamp with one high-output LED, one red LED and five lighting modes (three continuous and two strobe) and Wide Angle lensThe TIKKA XP2 headlamp integrates two light sources as well as a Wide Angle lens with a simple open-close feature, allowing the user to choose between a long distance focalized beam and flood beam proximity lighting. This headlamp is equipped with a white high-output LED and a red LED. The white LED delivers 60 lumens in maximum mode and lights up to 60 meters. In economic mode, it can reach a burn-time of 160 hours. The red LED provides spare lighting to preserve night vision or to become a strobe light for increased safety, for example in an urban environment, etc. The TIKKA XP2 can be used with lithium batteries to decrease weight or increase performance in cold weather.Light quantity: 60 lumens (maximum mode), beam type: wide / focused, distance: 60 m (maximum mode), burn time: 160 h (economic mode), weight on the head: 88 g, CORE battery available as accessory

TIKKA XP®2 CORE E99 AEU, E99 AUK, E99 AUSHeadlamp with one high-output LED, one red LED, five lighting modes with CORE battery and standard USB wall chargerWith its Lithium Ion Polymer CORE battery, the TIKKA XP2 CORE headlamp is designed for intensive use. This headlamp integrates two light sources as well as a Wide Angle lens with assisted open-close feature, allowing the user to choose between a long distance focused beam and flood beam proximity lighting. It is equipped with a white high-output LED and a red LED. The red LED provides back-up lighting useful for preserving night vision, or strobe lighting for increased safety. With the OS by Petzl software (download at www.petzl.com), the user can customize headlamp performance in a number of ways to adapt the lighting intensity or battery life to the type of activity.Light quantity: 50 lumens (maximum mode), beam type: wide / focused, distance: 46 m (maximum mode), burn time: 70 h (economic mode), weight on the head: 83 g

TACTIKKA® E46 P2, E46 PC2Three LED headlamp with one lighting mode and red flip filterThe TACTIKKA headlamp is compact and lightweight and comes equipped with a red flip filter which provides discreet lighting for hunting or fishing, for example. With three LEDs and a single lighting mode, it is simple to use and provides powerful lighting with ample burn time. Its beam can be aimed in the desired direction, for example to check equipment.Light quantity: 26 lumens, beam type: large, distance: 27 m, burn time: 120 h, weight on head: 78 g

TACTIKKA® PLUS E49 P, E49 PCFour LED headlamp with four lighting modes and red flip filterThe TACTIKKA PLUS is designed for users who practices activities such as hunting, fishing or exploring nature on a regular basis. For this purpose, it has three lighting modes and a strobe mode for signaling the user's location. The lighting mode is selected using the easy-to-use button, adjusting quickly and easily to the situation by favoring either brightness or burn time (up to 150 hours). The red filter ensures discreet lighting and can be used quickly and easily when necessary. Its beam can be easily oriented with one hand, for example when replacing a hook.Light quantity: 35 lumens (maximum mode), beam type: wide, distance: 32 m (maximum mode), burn time: 150 h (economic mode), weight on the head: 78 g

TACTIKKA® PLUS ADAPT E49 PAFour LED headlamp with four lighting modes, red flip filter and ADAPT systemThe TACTIKKA PLUS XP headlamp is designed for someone wanting to use the headlamp on different mounts with the ADAPT system. This system allows the light body to be attached interchangeably to its elastic headband, or to a hard surface (helmet, etc.), or to be clipped onto a belt, pocket, etc. With three lighting modes, a strobe mode and red flip filter, this lamp is meant for intensive use in the outdoors (fishing, hunting, observation, etc.). Its beam can be easily oriented with one hand, for example when reading a map.Light quantity: 35 lumens (maximum mode), beam type: wide, distance: 32 m (maximum mode), burn time: 150 h (economic mode), weight on the head: 92 g

68 www.petzl.com 69© Arnaud Childeric

Headlamps

TACTIKKA® XP E89 PC, E89 PDHigh-output headlamp, four lighting modes, Boost mode and colored Wide Angle lensThe TACTIKKA XP headlamp comes in colors for specific outdoor activities like hunting or fishing. Its functionality, as well as its four Wide Angle lenses (red, green, blue and transparent), make this lamp perfect for the demanding user. The sliding Wide Angle lens allows the user to switch from a focused beam to a wide beam with one quick movement. This headlamp has three lighting modes for any situation and a strobe mode for signaling the user's presence. It also has a Boost mode to temporarily increase light intensity up to 50 meters, as well as a lamp body that can easily be aimed with one hand. The battery charge indicator light allows the user to easily keep track of battery life.Light quantity: 40 lumens (Boost mode), beam type: wide / focused, distance: 35 m (maximum mode), burn time: 120 h (economic mode), weight on the head: 95 g

TACTIKKA® XP ADAPT E89 PHigh-output headlamp, four lighting modes, Boost mode, colored Wide Angle lens and ADAPT systemThe TACTIKKA XP ADAPT headlamp is designed for someone wanting to use the headlamp on different mounts with the ADAPT system. This system allows the light body to be attached interchangeably to its elastic headband, or to a rigid surface (helmet, etc.), or to be clipped onto a belt, pocket, etc. This headlamp can adapt to any situation: it has three continuous lighting modes, a strobe mode and a Boost mode that instantly increases the lighting strength up to 50 meters (for finding your vehicle in the distance, for example). It comes with four interchangeable Wide Angle lenses (transparent, red, green and blue) and can switch from a focused beam to a wide beam with one quick movement. The battery charge indicator light allows the user to easily keep track of the battery life.Light quantity: 40 lumens (maximum mode), beam type: wide / focused, distance: 35 m (maximum mode), burn time: 120 h (economic mode), weight on the head: 120 g

TIKKA2 - ZIPKA2series headlamp accessories

CORE E93100Lithium Ion Polymer rechargeable battery for the TIKKA2 - ZIPKA2 line of headlampsDesigned for the TIKKA 2 - ZIPKA 2 line of headlamps, the CORE battery offers an advantage over regular batteries. It is very easy to insert and can be charged via any standard USB charger: a cell phone charger, a multimedia device, cigar lighter charger, or even a solar panel, a portable energy source, a computer, etc. Excellent performance at low temperatures, thanks to Lithium Ion Polymer technology. With the OS by Petzl software (download at www.petzl.com), the user can customize headlamp performance in a number of ways to adapt the lighting intensity or battery life to the type of activity.

USB CHARGER E93110Wall and car adapters for standard USBWall adapter with three plugs: European, UK, North American. 12 V car adapter.

ADAPT TIKKA®2 E97900Mounting system for TIKKA-ZIPKA and TIKKA2-ZIPKA2 series headlampsThe ADAPT multi-mount system allows the light source to be quickly and easily detached from the headband according to the conditions of use. It attaches to multiple mounts: on a helmet, the strap of a backpack, a vest, a belt, etc.

POCHE TIKKA®2 E93990Pouch for compact headlamps

POCHE ZIPKA®2 E94990

Pouch for compact headlamps mounted on retractable cord

CROCHLAMP S E04350Headlamp clips for thin-edged helmets

CROCHLAMP L E04405Headlamp clips for thick-edged helmets

Trail running in the Chartreuse range, Isère France

70 www.petzl.com 71

HeadlampsMYO headlamps

MYO® XP E83 P2Powerful headlamp, four lighting modes, Boost mode and Wide Angle lensThe MYO XP headlamp was developed for high-level performance. To do this, it uses a high-output LED, a Wide Angle lens, three constant lighting modes and a strobe mode. This headlamp provides powerful lighting that can be adapted to the situation and the activity. The Wide Angle lens option is useful for instantly switching between long-range and proximity lighting. If necessary, it is possible to occasionally increase the light output to 150 lumens with the Boost mode (to locate a person, a car, etc.). To efficiently manage battery life, this headlamp comes with a battery charge indicator light.Light quantity: 85 lumens (maximum mode), beam type: wide / focused, distance: 72 m (maximum mode), burn time: 180 h (economic mode), weight on the head: 175 g

MYO® XP BELT E84 P2Powerful headlamp with remote battery pack, four lighting modes, BOOST mode and Wide Angle lensThe MYO XP BELT headlamp evolved from the MYO XP. Its remote battery pack reduces the weight worn on the head to 75 g and protects the batteries from the cold to prolong their burn time. This lamp has all the features required for intensive use in any conditions: a high-output LED for powerful lighting, an optional Wide Angle lens for switching between a wide and a spot beam, three constant lighting modes, a strobe mode for signaling, a Boost mode of 150 lumens, and a battery charge indicator light.Light quantity: 85 lumens (maximum mode), beam type: wide / focused, distance: 72 m (maximum mode), burn time: 180 h (economic mode), weight on the head: 75 g

MYO® RXP E87 PPowerful, regulated and programmable headlamp, four lighting modes, Boost mode and Wide Angle lensThe MYO RXP is the first Petzl headlamp that is regulated and programmable, allowing the user to choose the order of lighting levels and to precisely adapt light output. To do this, there are three lighting modes, for each of which the user can select the power from among ten possible levels, from 8 to 140 lumens. This feature allows the lamp to be programmed for the type of activity and the length of use. Maximum power lighting would be suited for a short night run, for example; less powerful lighting would help preserve battery life and would therefore be ideal for a multi-day trek. This headlamp has Boost mode (160 lumens) and a strobe mode that can be programmed. It is compatible with lithium batteries to optimize performance, even at low temperatures. The Wide Angle lens offers the option of switching instantly from a focused beam to a wide beam when necessary.Light quantity: 140 lumens (level n° 10), beam type: wide / focused, distance: 77 m (level n° 10), burn time: 95 h (level n° 1), weight on the head: 175 g

MYO headlamp accessory

MYO® XP BELT battery pack E84100

DUO headlamps

DUO® LED 5 E69 PHybrid waterproof headlamp: halogen / 5 LEDsWater proof down to -5 m and sturdily constructed, the DUO LED 5 headlamp is perfect for water sports. Its hybrid light source can be directed to adapt the lighting to the needs: halogen lighting for focused, regulated, long-range lighting; LED lighting for long-duration proximity lighting.Light quantity: 40 lumens (5 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 65 h (5 LEDs), weight on the head: 300 g

DUO® LED 14 E72 PHybrid waterproof headlamp: halogen / 14 LEDs with three regulated lighting modesThe DUO LED 14 headlamp is waterproof to -5 m. It is specially adapted for caving and water sports. It has two light sources: a halogen bulb for lighting over long distances with a focused beam, and 14 LEDs for proximity lighting with a longer burn time. This second light source has three lighting modes, which are regulated to ensure constant lighting. When the batteries become weak, the headlamp switches automatically to reserve power mode.Light quantity: 67 lumens (14 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 183 h (14 LEDs, economic mode), weight on the head: 300 g

DUO® LED 14 ACCU E72 ACHybrid waterproof headlamp: halogen / 14 LEDs with three regulated lighting modes and rechargeable batteryWith a Ni-MH rechargeable battery pack, the DUO LED 14 ACCU headlamp is designed for serious cavers. This headlamp is waterproof to -5 m and has a halogen light source for focused, distance lighting, and a second, 14 LED source for long-duration, proximity lighting. The user has three regulated proximity lighting modes at his disposal. The lamp automatically switches to reserve power mode when batteries are almost discharged. The battery pack is quickly recharged using its wall charger.Light quantity: 67 lumens (14 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 96 h (14 LEDs, economic mode), weight on the head: 380 g

DUOBELT LED 5 E73 PHybrid waterproof headlamp: halogen / 5 LEDs and remote battery packThe DUOBELT LED 5 headlamp has a remote battery pack. This feature reduces the weight carried on the head and improves comfort. The front of the headlamp has two light sources: LEDs for proximity lighting to ensure ample battery life, and a halogen bulb for distance lighting. The light body can be easily directed with one hand.Light quantity: 40 lumens (5 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 350 h (5 LEDs), weight on the head: 140 g

72 www.petzl.com 73© Serge Caillault

Headlamps

DUOBELT LED 14 E76 PHybrid waterproof headlamp: halogen / 14 LEDs with three regulated lighting modes with rechargeable battery and remote battery packThe DUOBELT LED 14 headlamp has a remote battery pack. This feature allows large capacity batteries to be used without affecting comfort on the head. The headlamp has a hybrid light source that can be directed: the first is equipped with LEDs for proximity lighting with ample burn time, and the second uses a halogen bulb for powerful, focused lighting. The user has three regulated LED lighting modes available to adapt the light to different situations. Lighting automatically switches to reserve power mode when the batteries become weak.Light quantity: 67 lumens (14 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 430 h (14 LEDs, economic mode), weight on the head: 140 g

FIXO DUO® LED 14 E63 L14Hybrid headlamp for attachment to helmet: halogen / 14 LEDs with three regulated lighting modesFIXO DUO LED 14 responds to the needs of cavers looking to customize their lighting. This waterproof headlamp is compatible with most helmets. It comes with an adapter plate and drilling template for ECRIN and VERTEX helmets. It has two light sources that can be directed: a halogen bulb for lighting over long distances with a focused beam, and 14 LEDs for proximity lighting with a longer burn time. The LED light source offers three lighting modes to choose from and has an integrated regulation system which ensures constant lighting independent of the condition of the batteries. When the power level becomes too weak, lighting switches instantly to reserve power mode until the batteries are completely discharged.Light quantity: 67 lumens (14 LEDs), beam type: wide / focused, distance: 100 m (halogen), burn time: 183 h (14 LEDs, economic mode), weight on the head: 180 g

DUO headlamp accessories

ACETO E18Acetylene lighting with piezo ignitionWeight: 95 g

ARIANE E50Acetylene generatorCapacity: can hold up to 400 g of carbide, weight: 400 g

MODU’LED 14 DUO® E60970Hybrid reflector + 14 LED module with three regulated lighting modesWeight: 8 g

ACCU DUO® E65100 2Large capacity rechargeable battery for the DUO LED 5 and 14

ACCU DUO® + EUR / US charger E65 2Large capacity rechargeable battery for DUO LED 5 and 14 with quick charger

DUO® wall charger E65200 2Quick charger for ACCU DUO

12 V car charger for DUO® E65300 2ACCU DUO car charger

“Eiskogelhöle” Cave-Tennegebirge Range, Austria

74 www.petzl.com 75

HeadlampsULTRA headlamps

ULTRA WIDE E52 ACWUltra-powerful headlamp with wide beam, four regulated brightness modes, ACCU 2 ULTRA rechargeable batteryPure Power by Petzl - Ultra-powerful and ergonomic headlamps designed for activities requiring a wide beam (caving, etc.). The ULTRA WIDE provides ultra-powerful regulated lighting of 300 lumens and a uniform beam for approximately 180°. Designed for action, the ULTRA WIDE is held securely on the head. The ULTRA WIDE is extremely reliable and robust: in all weather conditions, with long burn-times, with remaining battery life that is easily verified. The ULTRA WIDE's accessories allow the headlamp to adapt to the user's needs; most notably, the optional extension cord allows the battery pack to be disconnected from the headband to reduce the weight carried on the head.Light quantity: 300 lumens, beam type: wide, distance: 59 m for 1h 30 (maximum mode), burn time: 25 h (economic mode), weight on the head: 345 g

ULTRA E52 ACUltra-powerful headlamp, three regulated brightness modes, ACCU 2 ULTRA rechargeable batteryPure Power by Petzl - Ultra-powerful and ergonomic headlamp designed for intense activities such as treks and running. The ULTRA offers ultra-powerful, regulated lighting (350 lumens) and a wide and intense beam that will last for the entire activity. Designed for action, the ULTRA is held securely on the head. The ULTRA's design and durability make it extremely reliable: all-weather use, long burn-times, easy power level verification. The ULTRA's accessories allow the headlamp to adapt to the user's needs; most notably, the optional extension cord allows the battery pack to be disconnected from the headband to reduce the weight carried on the head.Light quantity: 350 lumens, beam type: wide / focused, distance: 120 m for 1h 30 (maximum mode), burn time: 16 h 55 (economic mode), weight on the head: 345 g

ULTRA BELT ACCU 2 E53 AC2Ultra-powerful headlamp, three regulated brightness modes, ACCU 2 ULTRA remote rechargeable batteryPure Power by Petzl - Ultra-powerful and ergonomic headlamps designed for rapid movement. The weight is optimized for the user. The ULTRA BELT headlamp offers ultra-powerful, regulated lighting (350 lumens) and a wide and intense beam that will last for the entire activity. Designed for action, the ULTRA BELT is held securely on the head. The weight on the head is reduced to a minimum (230 g). This is due to its remote battery pack, which can easily be carried in a pocket or on the ULTRA harness. The ULTRA BELT is extremely reliable: in all weather conditions, with long burn-times, the power level is easily verified.Light quantity: 350 lumens, beam type: wide / focused, distance: 120 m for 1h 30 (maximum mode), burn time: 16 h 55 (economic mode), weight on the head: 230 g

ULTRA BELT ACCU 4 E53 ACUltra-powerful headlamp, three regulated brightness modes, ACCU 4 ULTRA remote rechargeable batteryPure Power by Petzl - Ultra-powerful and ergonomic headlamps designed for rapid movement and endurance activities. The ULTRA BELT offers ultra-powerful, regulated lighting (350 lumens) and a wide and intense beam that will last for the entire activity. Designed for action, the ULTRA BELT is held securely on the head. The weight on the head is reduced to a minimum (230 g). This is due to its remote battery pack, which can easily be carried in a pocket or on the ULTRA harness. The ULTRA BELT is extremely reliable: in all weather conditions, with long burn-times, the power level is easily verified.Light quantity: 350 lumens, beam type: wide / focused, distance: 120 m for 3 h 15 (maximum mode), burn time: 34 h 20 (economic mode), weight on the head: 230 g

ULTRA headlamp accessories

ACCU 2 ULTRA E55450High performance, large capacity rechargeable battery for ULTRA headlampsHigh performance 2000 mAh rechargeable battery for ULTRA headlamps. The Lithium Ion technology offers a greater capacity for reduced weight and excellent performance at low temperatures.

ACCU 4 ULTRA E55400High performance, large capacity rechargeable battery for ULTRA headlampsHigh performance 4000 mAh rechargeable battery for ULTRA headlamps. The Lithium Ion technology offers a greater capacity for reduced weight and excellent performance at low temperatures.

ULTRA harness E55960Harness for carrying the ULTRA headlamp's remote battery pack on the backLight, ergonomic harness designed for comfortably carrying the ULTRA headlamp's remote battery pack. Worn close to the body, this sculpted harness is completely adjustable to guarantee excellent comfort while remaining stable and securely positioned.Weight: 208 g

ULTRA extension E55950Extension cord for ULTRA and ULTRA WIDE headlampsThe ULTRA extension cord allows the user to reduce the weight carried on the head by disconnecting the battery pack from the headband and carrying it in a pocket or connecting it to the ULTRA harness.Length: 1.1 m

ULTRA quick charger E55800Quick wall charger for ACCU 2 ULTRA and ACCU 4 ULTRA batteriesQuick wall charger for high performance ACCU 2 ULTRA and ACCU 4 ULTRA rechargeable batteries (Lithium Ion technology).100/240 V EUR/US compatible wall charger

ULTRA mount for caving helmet E55940Front and back plates for mounting ULTRA headlamp on caving helmetsWeight: 40 g

ULTRA mount for cycling helmet E55920Plates for mounting ULTRA headlamp on cycling and mountain biking helmets with thick or thin edgesWeight: 30-40 g

ULTRA mount for bicycle handlebars E55930Plates for mounting ULTRA headlamp on bicycle handlebars and carrying battery packsFive possible positions for a more centered beam. Compatible with handlebars between 22 and 32 mm. Pouch with Velcro loops for carrying the ACCU 2 and ACCU 4.Weight: 175 g

76 www.petzl.com

© POSF

© Regard du vivant

© Monica Dalmasso

© Bernardo Gimenez

© PETZL 2011

HeadquartersPETZL INTERNATIONAL Z.I. Crolles38920 CROLLESFRANCEwww.petzl.com

DesignPetzl

Graphic designPierre Bena design - Annecy, France www.pierrebenadesign.com

Translation (15 languages)Thanks to the entire team of translators and proofreaders for all their work

Products photosPhotos are non contractual Petzl / Kalice - www.kalice.fr

PrintingPrinted in Italy by MaestroCatalog printed on 100 % recycled paper, made up mostly of post-consumer waste. Using non-chlorine bleach, the production of this catalog respects the environment by reducing energy consumption, as well as air and water pollution.

Training

The use of Petzl products demands technical knowledge and competence. This is why Petzl offers to take each user, or retailer, through a range of specialized workshops dedicated to vertical activities. These are available locally in each country through Petzl’s international distribution network.The Petzl Institute was created to be a place for exchange and experimentation. Its goal is to unite experiences and knowledge under one roof in order to invent and develop the techniques of tomorrow. To reach these objectives, it is necessary to increase our understanding of the different components of verticality. This modeling phase is essential. It must integrate human dimensions, both physiological and psychological, as well as technical dimensions, which may involve equipment or progression. For more information, please consult www.petzl.com

The Petzl Foundation

Created in 2006, the Petzl Foundation’s mission is to offer support to non-profit organizations, especially in three areas: - promoting safety awareness - preserving the environment - supporting fundamental researchDepending on the specific needs of each country, the Petzl Foundation proposes training programs, tools for teaching and training in collaboration with local associations or non-governmental organizations (NGOs). For more information on current projects, visit www.petzl-foundation.org

Warning

Activities at height are inherently dangerous and may result in serious injury or death. Take the time to fully read and understand the information presented in this catalog, as well as the instructions for use that come with the products. Gaining an adequate apprenticeship is your own responsibility. The information presented in this catalog is believed to be correct at press time. But it is not guaranteed to be exhaustive, correct, understandable, or up-to-date. PETZL reserves the right to modify this information at any time. Petzl’s civil liability does not extend to products that have been modified or repaired outside our factories. Contact PETZL if you have any doubt or difficulty in understanding the information presented in this catalog. (www.petzl.com/contact)

Montsant, Espagne

2011

www.petzl.com

© Serge Caillault, Pascal Tournaire, John Evans, Jocelyn Chavy, Arnaud Childeric Kalice

2011 Z12To find a Petzl retailer near you or anywhere in the world go to: www.petzl.com/dealers TOOLS AND TECHNIQUES

ENGLISH

Petzl Sport Catalog 2011 En

Documents

Transcript of Petzl Sport Catalog 2011 En