PETTIT PAINT TOPSIDE FINISHESPRODUCT GUIDE

The Most Beautifully Durable, Easy to Use, Long Lasting Polyurethanes

™

Note: All swatch colors shown in this brochure are approximations of the actual paint color in the can.

White - 3175

Blue Ice - 3213

Platinum - 3711

Jade Green - 3348

Hatteras Cream - 3208

Burgundy - 3626

Dull Dead Grass - 3303

Hatteras Off White - 3108

Electric Sapphire Blue - 3237

Steel Gray - 3720

Fighting Lady Yellow - 3456Seafoam Green - 3333

Semi-Gloss White - 3106

Bikini Blue - 3229

Seattle Gray - 3715

Kelly Green - 3350

Ocean Blue - 3248

Black - 3801

Sandtone - 3518

Mediterranean White -3184

Dark Blue - 3290

Fire Red - 3624

Grand Banks Beige - 3520

EZ-Poxy® is a modern one-part polyurethane topside and deck enamel improved by the addition of silicone for a brilliant shine and easy brush-ability. Its advanced ultraviolet filters enhance the superior gloss retention and durability of polyurethane. The result is a topside finish that’s exceptionally easy to apply, producing a lasting gelcoat-like brilliance with minimal effort. It is more economical, requires less effort and is more forgiving than the competition’s.

TOPSIDE ENAMEL

EZ-Poxy® Performance Enhancer 3021gives our topside finishes additional gloss retention and hardness. This easy-to-use additive increases EZ-Poxy and other paint’s longevity by improving durability. Compatibility over almost all marine topside paints and ease of brush-ability makes EZ-Poxy Performance Enhancer the perfect choice for DIY or Professional use.

PREP AND CONDITIONING PRODUCTS

VARNISH

SPECIFIC DUTY TOPSIDES

EZ-Decks is a super-tough polyurethane non-skid performance deck finish containing a polypro-pylene grit that produces a slip-resistant finish on all decks and cabin soles. The durable weather resistant finish resists long term abrasion and abuse. It’s loaded with ultraviolet filters to fight against fading while offering superior color retention that will stay vibrant for years without peeling or cracking.

White - 3127 Off White - 3128 Platinum 3129

EZ-Bilge is a durable high-performance alkyd finish specially formulated to with-stand the abuses associated with boat bilges. Its tough resilient surface will stand up to years of engine fluids, abrasion and wear. EZ-Bilge is easy to apply by brush, roller or spray and provides excellent coverage.

Bilge Gray - 3125White - 3124

EZ-CabinCoat is a high-performance, water-based paint specially formulated for areas such as cabins, that are prone to moisture. A super-tough finish provides a moisture resistant, mold & mildew proof surface that will stay good-looking for years. EZ-CabinCoat provides excellent adhesion to most glossy and hard to paint surfaces without the need for sanding. Easy application, with soap & water clean-up.

White - 3121

pett i tpa int .com • 800-221-4466

EZ-Prime is a multipurpose primer designed for use as a base coat whenever the surface to be painted is aged, cracked, checked, pitted or in any way less than smooth. It can be applied to fiberglass, wood, properly etched metal and previously painted surfaces. EZ-Prime fills imperfections fast, dries quickly and is easy to sand.

White - 6149

EZ-Fair 7050 Epoxy Fairing Compound Lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the waterline. The special resins used in EZ-Fair impart a high degree of water and chemical resistance to the product, making it an integral part of the Pettit Gelcoat Blister Repair System. In addition, EZ-Fair is the product of choice for fairing metal keels or any underwater surface. Available in can kits or a unique self-measuring cartridge dispenser.

9080 Satin Additivewill produce a semi-gloss to semi-flat finish often desired for non-glare deck surfaces and interiors

9900 Skidless Compound creates a non-slip surface.

120 Thinner is the general-purpose thinner recommended for the EZ-Poxy family of products.

EZ-Tex 7100 is an easy to use epoxy repair compound for use where a high strength, waterproof, permanent repair is needed. This unique formula creates a tenacious bond to most surfaces. Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges and voids. A 1:1 ratio makes mixing easy. EZ-Tex can be sanded, drilled, tapped, screwed and painted once cured.

92 Bio-Blue Dewaxer is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting, regardless of the boat’s age. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt and mold release agents from fiberglass surfaces prior to painting.

PET 845(LTR)_2/19

Captain’s Varnish 1015A favorite among traditional marine industry professionals, this varnish is highly regarded for its reliable service, ease of application, outstanding gloss retenGon and tough,

yet flexible, durability. A combination of phenolic and alkyd resins blended with tung and linseed oils provide excellent performance. Its warm, light amber hue will enhance the rich, classic bright work appearance.

Flagship Varnish 2015Offers the best protection against the sun’s damaging rays. With six times more UV inhibitors, this blend of phenolic and alkyd resins combined

with tung and linseed oils offers excellent performance and a warm, deep amber hue. This high-build formula offers excellent abrasion resistance and a high gloss finish.

SeaGold - 2040 Gloss 2045 Satin

The beauty and durability of varnish, the ease of use of synthetic wood treatments, low-odor and user-friendly and VOC compliant. UV stable resins provide a long lasting finish that will not turn color with exposure to the elements. Its fast-

drying formula allows 3 to 4 coats in a day. SeaGold can be applied over existing varnishes and its translucent amber color does not hide or blur the wood grain. Soap and water clean-up. Available in Satin and new Gloss.

New!

New!