PETKUS Chemical BatchTreater C50
2
6-20-1 08/2015 Chemical Batch Treater C 50 The PETKUS Chemical Batch Treater C 50 is used for chemical seed treating, precision coating and pelleting of seed. Advantages: Absolutely even and complete coating of the grain surface High-precision, gravimetric dosing of the seed and coating agent Gentle treatment of the seed due to rotor-stator-principle Documentation of the process data Fully automatic process flow with self-emptying function Freely programmable control Self-cleaning system Description: The seed is transported over a weighing unit into the impeller type mixer and is evenly distributed over a symmetric inlet, which is easily remo- veable for cleaning. The seed dressing is dosed by a metering pump on a spraying disc and evenly sprayed on the seed, creating a fine mist. During the mixing process and because of the centrifugal force, the seed is moved up the walls of the impeller type mixer in an outer veil, and due to the conical shape of the stator, the seed falls back to the rotor in a smaller inner veil. This process creates a completely even coating. At the end of the process, the impeller type mixer is completely emptied by an electro-pneumatic flap. The treated product is moved to the outlet. Dust is extracted from the seed in all process stages by the central cone. Construction: The Chemical Batch Treater consists of a weighing unit, the impeller type mixer with the spraying disc, the stator and rotor, and the dosing unit with the pump. The drive is operated with a gear motor. The Chemical Batch Treater is controlled by a control cabinet with a touch panel. Standard Equipment: Bolted housing made of sheet steel Mixing container with rotor and stator Dosing unit with a pump Control cabinet with touch panel and control software Weighing unit Product outlet Sensors for monitoring and control Options: Additional pumps Powder dosing Equipment for coating and pelleting Display of automatically process Batch treating process flow 1. Filling process 3. Mixing process 2. Spraying process 4. Emptying process PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-mail: [email protected] | www.petkus.com
description
PETKUS Batch Treater for seed with capacity of 10t/h
Transcript of PETKUS Chemical BatchTreater C50
6-20
-1 0
8/20
15
Chemical Batch Treater C 50
The PETKUS Chemical Batch Treater C 50 is used for chemical seed treating, precision coating and pelleting of seed.
Advantages:
� Absolutely even and complete coating of the grain surface � High-precision, gravimetric dosing of the seed and coating agent � Gentle treatment of the seed due to rotor-stator-principle � Documentation of the process data � Fully automatic process flow with self-emptying function � Freely programmable control � Self-cleaning system
Description:
The seed is transported over a weighing unit into the impeller type mixer and is evenly distributed over a symmetric inlet, which is easily remo-veable for cleaning. The seed dressing is dosed by a metering pump on a spraying disc and evenly sprayed on the seed, creating a fine mist. During the mixing process and because of the centrifugal force, the seed is moved up the walls of the impeller type mixer in an outer veil, and due to the conical shape of the stator, the seed falls back to the rotor in a smaller inner veil. This process creates a completely even coating.At the end of the process, the impeller type mixer is completely emptied by an electro-pneumatic flap. The treated product is moved to the outlet.Dust is extracted from the seed in all process stages by the central cone.
Construction:
The Chemical Batch Treater consists of a weighing unit, the impeller type mixer with the spraying disc, the stator and rotor, and the dosing unit with the pump.
The drive is operated with a gear motor. The Chemical Batch Treater is controlled by a control cabinet with a touch panel.
Standard Equipment:
� Bolted housing made of sheet steel � Mixing container with rotor and stator � Dosing unit with a pump � Control cabinet with touch panel and control software � Weighing unit � Product outlet � Sensors for monitoring and control
Options:
� Additional pumps � Powder dosing � Equipment for coating and pelleting
Display of automatically process
Batch treating process flow
1. Filling process 3. Mixing process
2. Spraying process 4. Emptying process
PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-mail: [email protected] | www.petkus.com
A-A
A A
A A
B B
C C
D D
1
1
2
2
3
3
4
4
5
5
6
6
17.05.2013 M.G.
1 : 25
Chargenbeizer CT50 komplet
1 A3
NameÄnder./Revision Datum
D-99848 Wutha-FarnrodaRöberstr. 8
Web: http://www.petkus.dePhone: +49(0) 36921 - 98-0
Index
Zeichnungsnummer/Drawing Number
Zul. Abweichung
Ers. für:
Benennung/DescriptionDatumBearb.
Name
Blatt/Sheet
Ers. durch:
CCT50-0000-000
PETKUS Technologie GmbH Oberfl. Maßstab/Scale Gewicht/WeightWerkstoff/Material
8002111
700
1000
842
613
700
959
800
1482
,5
300
849
1983,5
859
1404
1454
969
160
110
18
3155
200
150
534
Chemical Batch Treater C 50
Technical alteration reserved.
Technical Data C 50Capacity (based on wheat) t/h up to 10Quantity/Batch kg 25 - 50Cycletime/Batch s normal 20Motor rotor and impeller disc kW 7.5Motor fan kW 2.2Gear motor metering pump SP 15 kW 0.18 / 0.25
PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-mail: [email protected] | www.petkus.com
![F0B4 [C40-30] F0B5 [C40-05] Lenovo C40/C50 Series · Machine type: F0B1 [C50-30] F0B4 [C40-30] F0B5 [C40-05] 2014.08 Lenovo C40/C50 Series User Guide SP40G46523. Important Safety](https://static.fdocuments.in/doc/165x107/5e9ab210b0480907f77c8243/f0b4-c40-30-f0b5-c40-05-lenovo-c40c50-series-machine-type-f0b1-c50-30-f0b4.jpg)
