Perspective on Oxygen Technologies and ASTM G04 Trends_Rev2.pdf · Perspective on Oxygen...
Transcript of Perspective on Oxygen Technologies and ASTM G04 Trends_Rev2.pdf · Perspective on Oxygen...
Barry Newton
WHA International Inc.
ASTM G04 - October 10, 2017
Perspective on Oxygen Technologies and ASTM G04
Beginnings: ASTM G04 Historical Perspective
• Dr. Abraham Lapin – Air Products and Chemicals, Inc. responding to a CGA Task Force on safety of oxygen regulators and compatibility of materials recognized the need for contribution from outside of CGA
• February 1975 – ASTM G04 was initially formed to assemble researchers and oxygen practitioners from across industry and government
• Initial ASTM G04 Committee:• Chairman – W.L. Ball (Air Products and Chemicals, Inc.)
• Vice-Chairman – C.F. Key (NASA Marshall Space Flight Center)
• Secretary – C.E. Johnson (Boeing Company)
• G04.01 Test Methods Chairman – P. Ordin (NASA Lewis Research Center)
• G04.02 Recommended Practices Chairman – R.M. Neary (Union Carbide, Linde Div.)
• Membership – 66 members by 1983
ASTM G04 Original Scope • Develop and promulgate standard test methods, definitions, recommended
practices and classifications for determining the compatibility and sensitivity of
materials, materials configurations and applications intended for use in systems
subjected to enriched oxygen atmospheres including ignition, combustion, off-
gassing, reaction products and decomposition tendencies.
• Enhance the promotion and dissemination of related knowledge.
• First Guides and Standards:• ASTM G63 – Guide for Evaluating Materials for Oxygen Service (1980)
• ASTM G72 – Test for Determination of Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment (1982)
• ASTM G74 – Test to Determine Ignition Sensitivity of Materials by Gaseous Impact (1982)
Strategic Plans Developed by 1976• By the committee’s third meeting the following matrix was compiled of available
ignition and experience which guided rapid development
Robert Neary – ASTM STP 812 (1983)
ASTM G04 Industry Contributions• 20 Test Methods and Guides by 1996
• Fire Hazards in Oxygen Systems Training by ~1991
• ASTM Manual 36 in 2000
• ASTM G175 in 2003
• 14 Standard Technical Publications:
The Industry is Changing…Should GO4 Scope Change?
• NASA/Aerospace >> Commercial Space Flight
• Merger’s and Acquisitions (and Divestments): (Really, Really Big Business, 100 bn +)
• Linde and BOC
• Air Liquide and Airgas
• Linde, BOC and Praxiar (“Merger of Equals”, $70 bn)
Company Market Share (2015)
Air Liquide 20%
Linde (BOC) 20%
Praxair 14%
Air Products 12%
Airgas 4%
TNSC (Taiyo Nippon Sanso Corp) 4%
Messer Group 2%
Smaller Producers/Distributors ~13%, 11%
Company Market Share (2017)
Praxair-Linde 33%
Air Liquide – Airgas 25%
Air Products 12%
TNSC (Taiyo Nippon Sanso Corp) 4%
Messer Group 2%
Smaller Producers/Distributors ~24%
Some Technology Trends…• Technology Trends Largely Driven By:
• Competition for >100 bn (my estimate) Global Industrial Gases Market• Emerging Oxygen Technologies like Carbon Capture• Emerging Oxidizer (O2, N20) Technologies, Aerospace and Commercial Spaceflight
• Higher Throughput and Efficiency in ASU Technologies
• Increased O2 in Carbon Capture Technologies
• Metals and Glass Refining • High Demand for >90% O2
• Precious Metals Refining• Gold Purification (HNO3+O2)• Autoclave System Metals Refining
• Food Industry • Modified Atmosphere Packaging (O2 Mix)• Seafood, Oxygenation in Fish Farming
• Packaged Gases• ISO and CGA Taking up Ultra-High Pressure Connections to 800 bar (11,600 psi)• Oxygen Cylinders up to 310 bar (4500 psi) available in Europe and Increasing Demand in US
Implications for ASTM G04, “is our scope still relevant?”
• Other Standardization Organizations• ISO promulgating many use standards, very quickly, with very wide subscription• Traditional standards organizations (CGA, ASTM, EIGA) supporting/harmonizing• EIGA/CGA standards are targeted and specific and they have expertise where they focus
• ASTM G04 has a different and important role in the industry
• Back to the beginning…Guides and Test Methods• Many technologies are new but Industry Needs and Questions haven’t changed• ASTM G04 still important source for data, testing, and risk analysis technologies
• ASTM G04 strength has been in solving problems by testing and test methods
• ASTM G04 test methods are used throughout the industry (our strength)
• ASTM G04 better at analyzing strengths and limits of our data (statistical analysis)
Implications for ASTM G04 (con’t)• ASTM G04 strength in publishing data and research through the STP series• ASTM G04 strength in bringing industry together to solving joint problems
• Metals Flammability Test Program (Promoted Burning, Friction Ignition, Particle Impact)
• Heated Metals Promoted Burning• Flowing Oxygen Promoted Burning• NF3 Materials Compatibility Research• Medical Regulator Tolerance Test Requested by FDA• NEW: G86 Task Group and Industry LOX MI Testing• NEW: Hyperbaric Systems Materials Guide
• Industry Still Needs Data on Ignition, Combustion, Reactivity, Decomposition• Higher Pressures and Temperatures today (greater severity), but…• Compatibility of materials is still the question
• Two Additional Focus Areas Need Development• Probabilistic Risk Assessments • Minimum Ignition Energy of Materials
Probabilistic Risk Assessment(quantify ignition probability and potential risk)
• Examples of questions being asked…• What mechanical impact energy is
required to ignite aluminum cylinder threads (w/ and w/o contamination)?
Probabilistic Risk Assessment(quantify ignition probability and potential risk)
• Questions:• What mechanical impact energy is
required to ignite aluminum cylinder threads (w/ and w/o contamination)?
• What size particle (mass > energy) and what particle velocity will ignite particle AND target? • 300-micron Carbon Steel
Particles Fired at Carbon Steel Target at 600 psig
• 20 Particles Fired Simultaneously (tight impact distribution)
• Melting/burning of particles but no ignition of target
• Particle velocities ~250 fps
Probabilistic Risk Assessment(quantify ignition probability (not subjective ranking) and potential risk)
• Questions:• What mechanical impact energy is
required to ignite aluminum cylinder threads (w/ and w/o contamination)?
• What size particle (mass > energy) and what particle velocity will ignite particle AND target?
• What enthalpy (energy) and rate of increase is needed to ignite material by rapid compression?
0
100
200
300
400
500
600
700
800
900
1000
0 20 40 60 80 100 120 140
Tem
pe
ratu
re
(oC
)
Pressure (bar)
Gas Temperature Estimates for Rapid Compression
Ideal Gas
Real Gas
WHA Numerical Model
0
100
200
300
400
500
600
700
800
900
1000
20 40 60 80 100 120 140 160En
thal
py
Ch
ange
(kJ
/kg)
Pressure (bar)
Enthalpy Calculations for Rapid CompressionEnthalpy Change for Ideal GasEnthalpy Change for Real GasEnthalpy Change by WHA Numerical ModelPTFE Enthalpy Change at AITNylon Enthalpy Change at AIT
PTFE Starts Igniting about 62 bar (for test conditions)
Nylon Ignites at all pressures >40 bar (for test conditions)
ASTM G04 Original Scope Still Relevant(produce and disseminate data and good practices)
• Develop and promulgate standard test methods, definitions,
recommended practices and classifications for determining the
compatibility and sensitivity of materials, materials configurations
and applications intended for use in systems subjected to enriched
oxygen atmospheres including ignition, combustion, off-gassing,
reaction products and decomposition tendencies.
• Enhance the promotion and dissemination of related knowledge.