Great Hardscapes Start Here®

ALBERTA • BRITISH COLUMBIA • CALIFORNIA • COLORADO • IDAHO • NEVADA • OREGON • WASHINGTON • WYOMING

©2017 Basalite® Concrete Products, LLC. All trademarks ® are registered trademarks. BA502_NV 500 5/17/2017

PAVERS | WALLS | OUTDOOR LIVING KITS

a division of Basalite Building Products

Front and back cover Permeable Cobblestone Pavers in Positano

Find Or Follow Us On

www.basalite.com

Permeable CobblestonePERMEABLE PAVING STONES

355 Greg StreetSparks, NV 89431775-358-1200

Permeable Cobblestone Pavers in Positano

Printed colors shown in this brochure may vary from actual product colors.We recommend selecting colors from actual product samples.

SPECIAL ORDER COLORSPlease call the Basalite office for

additional information, including delivery time.

Positano

ELIGIBLE LEED CREDITSThe information below represents possible LEED® credits where Basalite® SRI colorsand permeable pavement systems may contribute. Actual credits granted will vary byproject and/or product manufacturer. For more information, visit www.usgbc.org.

Category

Inovation and Design

Materials and Resources

Materials and Resources

Materials and Resources

Sustainable Sites

Sustainable Sites

Water Efficiency

Description

Structural Advantages and Life-Cycle Benefits

Construction Site Waste Management

Recycled Content

Regional Materials

Stormwater Design

Heat Island Effect

Water Efficiency

Eligible

•••••••

Credit

ID 1.1, 1.2

MR 2.1, 2.2

MR 4.1, 4.2

MR 5.1, 5.2

SS 6.1, 6.2

SS 7.1, 7.2

WE 1.1, 1.2, 2, 3.1, 3.2

*The installation instructions and illustrations shown are a basic overview of the paver installation methods. Because installation methods vary per product, please refer to the Basalite product specific installation guide, the Standard ICPI installation method, ICPI.org or visit www.basalite.com.

PAVER INSTALLATION*

Suggested Sub-BaseNo. 2 Aggregate 2-1/2” Crushed

Subgrade

Suggested Base Layer (S)No. 57 Aggregate 3/4” Crushed

BeddingNO. 8 AggregateNo Sand

Basalite® Permeable Paving Stones

Joint3/16th or 1/4”chipped clean washed

Curb/Edge Restraint

PATTERNSPermeable Cobblestone

1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area in accordance to ICPI guidelines. Backfill and level Sub-base with No. 2 aggregate 2-1/2” crushed.Backfill and level base layer with No. 57 aggregate 3/4” crushed. The joint material and the foundation (paver bed, subbase, subgrade) must be permeable. 60mm thick pavers may be used inpedestrian applications.

2. Install edge restraint using concrete curb, concrete toe or edging.

3. Place bedding course of No. 8 aggregate leveled to grade.

4. Install Pavers in closed assembly with spacer on stone for water drainage. Fill joints with gravel.

Where required, cut stones with an approved cutter to fit accurately.

5. Tamp pavers with mechanical vibrator, uniformly level, true to grade and free of movement.Textured pavers require a rubber pad for the vibrator to reduce scuffing.

6. Fill voids in joints by sweeping dry ASTM No. 8, 89 or 9 stones.

SPECIFICATIONS

Permeable Cobblestone pavers combine the look and feel of

old, Roman-style cobbled block, with environmental benefits.

Due to a unique spacer design, this paver allows storm water to

drain naturally into the surface, reducing contaminants and

helping to preserve our waterways.

PermeableCobblestonePERMEABLE PAVING STONES8p8

4x4Weight: 3.45 lbsUnits/Pallet: 168

4x8Weight: 6.75 lbsUnits/Pallet: 96

8x8Weight: 15.5 lbsUnits/Pallet: 72

4”4”

80 mm

8”

80 mm

4”

8”

80 mm

8”