Pergo installation
Transcript of Pergo installation
PERGO FLOORING AND IT’S UPKEEPa walk on luxury…
WHAT IS PERGO???Pergo is a Swedish flooring product company noted
primarily for its laminate flooring products.
PERGO USAGE
• Bathroom Installation
• Kitchen Installation
• Laundry Room Installation
• Commercial Purpose
• Residential Purpose
A BASIC OVERVIEW• Before installation
remove any kind of molding
• Remove Carpet, Pad and Tack Strips
• Remove wood flooring if installed at concrete subfloor
• Make sure that surface is flat
• Do not install without underlay
REQUIREMENTS FOR LAYOUT
• Before starting installing leave it open for 49-96 hours
• Temperature should be 65*F• Pergo Silent Step/ Soundbloc Foam• Pergo Moisturbloc on cement floor• Check damage before installation
PROCESS TO LAYOUT
• Job Site Evaluation • Moisture Test• Subfloor Requirements and Check• Installation should be late in the building
cycle• Crawl Spaces must be closed• Foam Should be laid• Finally Pergo should be laid• Ends to feel
MAINTENANCE
• Mop it with Lamello on daily basis• Vacuum the floor with bristles on• Damp mop should be done to keep
the shine• Use R2 to sanitize and clean the floor• Use buffing pads occasionally to
maintain the shine.
DO’S AND DON’TS
DO’S DON’TS
Make sure all furniture has shoes to avoid scratches
Do not drag the furniture
Use damp mop Do not throw any burning thing on the floor
Use Bristles while vacuuming Do not use wet mop
Do not vacuum without bristles on
Thank You!
Shared by
Ayush AgarwalHousekeeping Manager
Ista Ahmedabad