Prototype Performance in D0 test stand & fiber intrinsic performance with KEK test beam
Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s...
-
Upload
conrad-crawford -
Category
Documents
-
view
224 -
download
1
Transcript of Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s...
![Page 1: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/1.jpg)
Performance test and VNAPT
![Page 2: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/2.jpg)
Purpose of Performance test
Performance test will check the VNA’s performance to make sure it’s all within the specifications, such as output power, CW frequency, harmonic distortion, etc. The Analyzer’s recommended performance test interval is once each year.
Purpose of VNAPT
VNAPT is designed to automating VNA performance testing in order to ease the process and generate the report automatically.You can download the VNAPT software for Copper Mountain Technologies website.
![Page 3: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/3.jpg)
The following example procedure is based on Planar 804/1. Other models will be following a similar procedure with small differences, such as number of ports, frequency range, etc. For details, please refer to Performance Test Manual.
Procedure
1) Connect VNA to the computer2) Start VNA program, wait until the lower right corner
shows ‘Ready’3) Start VNAPT program4) Choose the device and click the blue start button to start
![Page 4: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/4.jpg)
Required equipment
Equipment similar to the listed can be used provided it satisfies the specifications shown in the table.
NPR-Z51 Thermal Power Sensor is required if automation of output power test is desired.
![Page 5: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/5.jpg)
Test content
Test procedure can also be found in the Performance Test document, which can be downloaded from Copper Mountain Technologies website.
![Page 6: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/6.jpg)
Software Interface
Click to view the navigation
Click to change the inspection
result
Click to enter to
test section
Click to generate or
print test report
![Page 7: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/7.jpg)
Software Interface
Click to back to home screen
Enter theoretical value
First, click the button to go to VNA program
and do the calibration
Then, click to perform
automatic measurement
![Page 8: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/8.jpg)
Software Interface
Click to expand for
detailed instruction
Click to pop up a window for
detailed instruction
![Page 9: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/9.jpg)
Note
• Version 1.4.9.22 of VNAPT support Planar 804/1, Planar 808/1, S5048, Planar R54, and Planar R140.
• For VNAPT to work properly, COM server need to be registered correctly near the end of VNA software
• Take care during the VNA software installation to register the COM server, which is the last step of the installer. At the prompt “Register COM Automation Server of the application” the box must be checked. A dialogue box indicating successful COM server registration will be displayed.
![Page 10: Performance test and VNAPT. Purpose of Performance test Performance test will check the VNA’s performance to make sure it’s all within the specifications,](https://reader035.fdocuments.in/reader035/viewer/2022062408/56649ea35503460f94ba7c12/html5/thumbnails/10.jpg)
• Test procedure can also be found in the Performance Test document, which can be downloaded from Copper Mountain Technologies website.
• Copper Mountain Technologies partners with several accredited service, repair, and calibration labs across the United States and internationally. Any certified lab can perform the maintenance needed for annual verification and calibration. Please contact us for details on these procedures.
• If you have any questions, please e-mail us at [email protected]