THE DRAG SPECIALTIES

JULY 2015

dragspecialties.com

PERFORMANCE SERIES 360W RMS 4-CHANNEL AMP KIT• The specific plug-n-play wiring harness included with this kit takes

the two-channels of audio signal available from the Harley RoadGlide radio (either version), and provides four separate channels of amplification at 90w RMS continuous, for each channel

• Full-range class D amplifier is spec’d at 90watts RMS per channel X4 channels, (360w total) driven continuously into a 2 ohm load @ 14.4vdc

• Amplifier mounts to the custom made, stainless-steel 2-piece bracket system, to provide solid and secure mounting inside the RoadGlide fairing, in addition to blocking amplifier heat from being transferred to the radio

• Custom made plug-n-play wiring harnesses are also included

• Top quality, heavy gauge, power/ground wires are used for the fused battery connection; all necessary mounting hardware and complete installation/operation instructions are included

• Amplifier measures 71/4" × 43/4" × 13/4"

PERFORMANCE SERIES 180W RMS 2-CHANNEL AMP KIT• Full-range class D, amplifier spec’d at 90watts RMS per

channel X2 channels, (180w total) driven continuous into a 2 ohm load @ 14.4vdc

• Amplifier mounts to the custom made, stainless-steel, 2-piece bracket system, to provide solid and secure mounting inside the RoadGlide fairing, in addition to blocking amplifier heat from being transferred to the radio

• Custom made plug-n-play wiring harnesses are included with this amplifier kit

• Top quality, heavy gauge power/ground wires are used for the fused battery connection; all necessary mounting hardware and complete installation/ operation instructions are included

• Amplifier measures 61/2" × 43/4" × 13/4"

ROKKER® XX 6.65" FAIRING SPEAKER KIT• Lightweight, waterproof, one-piece woven-fiber driver cone

• High-output, silk-dome tweeter

• Super high-density, light-weight neodymium magnet structure, specially coated to maintain flux-strength integrity even at extreme operating temperatures

• High-efficiency, vented voice-coil and magnet structure for improved cooling when operating at high volume levels for extended periods

• Custom max-flow speaker grills for crystal-clear sound at highway speeds

• Mounting hole pattern and spade electrical connections are exactly the same as the factory specification

• Plug-and-play, no-modification solution complete with easy to follow installation instructions

PART # DESCRIPTION SUG. RETAIL4405-0390 For 15 FLTRX/FLTRXS/FLTRUSE models $629.95

PART # DESCRIPTION SUG. RETAIL4405-0389 For 15 FLTRX/FLTRXS/FLTRUSE models $439.95

PART # DESCRIPTION SUG. RETAIL4405-0388 For 15 FLTRX/FLTRXS/FLTRUSE models $389.95

2

THE DRAG SPECIALTIES

JULY 2015

DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.

PART # DESCRIPTION SUG. RETAIL1800-1815 For 14-15 XL models $1,499.95

PHANTOM II EXHAUST SYSTEM• Brand new Paul Yaffe-

inspired design

• Curvy 2:1 custom stylized pipe features 2" primary header pipes flowing into a 3.5" collector

• Black ceramic-coated with four-piece chrome heatshields

• Rebuildable/removable baffle gives a great throaty roar

• Passenger-friendly design

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHROME1801-0801 For 07-10 FXST/B/C, 07-15 FLSTC, 08-11 FXCW/C $399.991801-0802 For 07-15 FLSTF, FXSTD 399.99

1801-0804 For 07-15 FLSTN, 08-11 FLSTSB (except 14-15 FLSTNSE) 399.99

1801-0806 For 91-15 FXD/FXDWG (except 08-15 FXDF, 10-15 FXDWG, 12-15 FLD, 15 FXDL) 399.99

1801-0808 For 08-15 FXDF, 10-14 FXDWG 399.991801-0810 For 04-13 XL 399.991801-0812 For 14-15 XL 399.95

PART # DESCRIPTION SUG. RETAILMATTE BLACK1801-0803 For 07-15 FLSTF, FXSTD $449.99

1801-0805 For 07-15 FLSTN, 08-11 FLSTSB (except 14-15 FLSTNSE) 449.99

1801-0807 For 91-15 FXD/FXDWG (except 08-15 FXDF, 10-15 FXDWG, 12-15 FLD, 15 FXDL) 449.99

1801-0809 For 08-15 FXDF, 10-14 FXDWG 449.991801-0811 For 04-13 XL 449.991801-0813 For 14-15 XL 449.95

2.5" MAVERICK SLIP-ON MUFFLERS• Feature 2.5" diameter chrome or

matte black round muffler bodies

• Maintenance-free, high-flowing, louvered baffles will never need repacking

• All mufflers feature precision CNC-machined billet aluminum end caps with high-temperature black ceramic coating

• Brushed stainless steel muffler badges featuring an embossed Crusher work mark logo

• Sold in pairs

• Made in the U.S.A.

1801-0801

1801-0803

3

DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.

PART # DESCRIPTION SUG. RETAIL1800-1755 Chrome pipes/chrome heat shields/chrome tips $799.951800-1756 Chrome pipes/black heat shields/chrome tips 799.951800-1757 Chrome pipes/black heat shields/black tips 799.95

PART # DESCRIPTION SUG. RETAIL1800-1758 Black pipes/black heat shields/black tips $799.951800-1759 Black pipes/chrome heat shields/black tips 799.951800-1760 Black pipes/chrome heat shields/chrome tips 799.95

FUSION EXHAUST SYSTEMS• Not tame or mild, these pipes will definitely draw

attention to your ride

• Sound is not obnoxious, but a deep, strong rumble

• Mufflers feature hexagon-shape exhaust tips with robotic welds

• Heat shields are stamped steel with edgy designs

• Exhaust tips are curved to direct heat away from the saddlebags

• Will work with saddlebag extensions and passenger footpegs

PART # DESCRIPTION SUG. RETAILFOR 09-15 FLHT/FLHR/FLHX/FLTR MODELS (EXCEPT 10 FLHTCUSE)1802-0293 W/ chrome heatshields $559.951802-0294 W/ black heatshields 639.95

POWER PORT DUAL BUNG HEADPIPES• Dual headpipes taken to a whole new level

• PowerPort crossover provides power boost across entire rpm range

• 2.5" heat shields

• Quick, simple installation

• Accepts OEM mufflers or any 95-15 OEM style mufflers

• Feature 12mm and 18mm bungs and include installed 18mm bung plugs with copper sealing washers

• 2009 models will require 12mm bung plugs (sold separately)

• Made in the U.S.A.

NOTE: Mufflers not included; must be purchased separately.

1802-0293

FOR 95-15 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (EXCEPT 15 FLRT)

• Not designed for use with the OEM air cleaner; aftermarket air cleaner and performance fuel management module are highly recommended

• Include O2 ports and necessary plugs, bungs, etc., for all year applications

• Made in the U.S.A.

1800-1755

1800-1756

1800-1757

1800-1758

1800-1759 1800-1760

4

THE DRAG SPECIALTIES

JULY 2015

KLOCK WERKS If you have not tried-

on and tried-out a pair of Klock Werks’ Klip Hanger

Handlebars, like the new ones you see below, then you

don’t know what both you and your customers are missing.

The bar sections themselves are available in several heights

depending upon bike model. The “Klamps” that mount

the control/grip portions can then be adjusted in several

directions to perfectly suit any rider’s exact liking. Have

a pair or two mounted for your customers to try on for size.

KLIP-HANGER PULLBACK HANDLEBARS• Innovative bars present the ultimate in rider

personal adjustment and fit

• Offer more pullback than the standard Klip Hanger bars for a more relaxed ride

• Unique “Klamps” allow control/grip portions of the handlebar to be adjusted in several directions; rider can tailor to his/her exact liking

• Bar sections are manufactured from DOM tubing, ‘Klamps’ are machined from 6061 billet aluminum and all hardware is stainless steel

• All feature a fully knurled 1.25" riser clamp area for standard risers

• All are drilled/slotted for wiring, and bar end is notched for throttle by wire applications

• All include chromed, billet aluminum, domed bar end plugs for a finished look

• Work with HD OEM Heated Grips

• Fit perfectly with the new narrower center section of the Road Glide 15+ models with anti-vibration clamps

• Made in the U.S.A.

SIX-GAUGE KITSPART # DESCRIPTION SUG. RETAILFOR 96-03 FLHT/FLTR2212-0566 Black/gray background w/ chrome bezel $1,499.952212-0567 Black/gray background w/ black bezel 1,499.952212-0568 White/gray background w/ chrome bezel 1,499.952212-0569 White/gray background w/ black bezel 1,499.952212-0570 Black/red background w/ chrome bezel 1,499.952212-0571 Black/red background w/ black bezel 1,499.95

MVX-8K SERIES ANALOG/DIGITAL PLUG-IN INSTRUMENTATION• Six-gauge kits provide all seven gauge readings displayed in the speedometer and tachometer

LCD readouts (speed, rpm, volts, fuel, oil pressure, oil temp, and air temp), as well as miles to empty, and performance readouts (0-60 time, and quarter-mile speed and time)

• Personalize your gauge set by programming the pointer, backlight and LCD message center colors independently

• Kits include speedometer, tachometer, oil pressure, oil temperature, fuel level and voltmeter

• Seven user-selectable LED lighting colors available for background, message and pointer: red, green, blue, teal, magenta, amber or white

• Three background options to choose from: black/gray, white/gray or black/red

• Chrome or black bezels available

• Proudly designed and manufactured in the U.S.A.

PART # SUG. RETAIL DESCRIPTION UPRIGHT BAR RISE GRIP-TO-GRIP WIDTH10"0601-3126 $459.95 Chrome/chrome 10" 35"0601-3125 459.95 Black/chrome 10" 35"0601-3124 459.95 Black/black 10" 35"14"0601-3129 459.95 Chrome/chrome 14" 35"0601-3128 459.95 Black/chrome 14" 35"0601-3127 459.95 Black/black 14" 35"

FOR 15 FLTRX/FLTRXS/FLTRUSE AND CUSTOM APPLICATIONS

2212-0567 2212-05712212-0569

0601-3124

5

GASBOX Earlier we told

you a little bit about the Gasbox

folks who are cranking out hot

new custom products from a large,

nondescript warehouse in an

industrial area of Cleveland, Ohio.

We also told you that they were

starting to gain a lot of attention

within the custom bike world and

that we would certainly be doing

our part to make certain every new

Gasbox accessory was in stock and

ready to go. Just like the ones you

see right here.

PART # DESCRIPTION SUG. RETAIL

0933-0114 For 04-15 XL models (designed for OEM fuel-injected coil)

$74.95

0933-0113 For 86-03 XL models (will not work with stock petcock on left side of tank) 74.95

CUSTOM TOP MOTOR MOUNTS• These heavy-duty, custom top motor

mounts from Gasbox feature a convenient spot to relocate your ignition switch and a coil mount

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0704-0018 For 86-03 Sportster models $49.95

FRISCO STYLE GAS TANK LIFT KIT• Kit raises the front of the tank

several inches, providing the Frisco look but without the cost of a new tank or paint job

• Bracket will lift the front of the tank approx. 3.5" center-to-center on the mounting holes

• Made from heavy-gauge steel with a machined spacer; welded and powder-coated for durability

• Install by removing your tank’s front mount hardware, sliding the bracket in and using your stock hardware and the additional hardware included, then bolting the tank back on

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2010-1247 Vertical taillight mount bracket $12.952010-1248 Horizontal taillight mount bracket 12.95

MOUNT BRACKETS FOR JOHNNY FIVE TAILLIGHT• Allow installation of the Johnny Five taillight (PART #2010-1231) to a license

plate bracket without provision for a light

• Mount brackets are drilled to match a standard 4" × 7" license plate

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL

0411-0121 For 14-15 FLHT, FLHR, FLTRX, FLHX and H-D FL Trike

$489.95

0411-0120 For 84-13 FLT, FLHT, FLHR, FLTR, FLHX and H-D FL Trike 489.95

ELITE SERIES BLACK RAPTURE FORK SLIDER COVERS• 6061 billet aluminum construction

• Easily create a custom look by replacing the factory stock fork slider covers

• Covers complete the Elite line of products including foot controls, windshield trim and bag latches

• Sold in pairs

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2202-0208 For 14-15 FLHTCU, FLHTK models $78.95

SWITCH ACCENT TRIM• Polished stainless steel construction

will not rust, pit, chip or discolor

• Dresses up the inner fairing cap assembly

• No mounting hardware required

• Made in the U.S.A.

2010-1248

2010-1247

0411-0121

0933-0113

0933-0114

6

THE DRAG SPECIALTIES

JULY 2015

PROFILER TTR SEATS• Slammed two-up seat features narrow styling, a thin profile and low riding height

• Seat is designed to drop the rider down into the bike for the lowest riding position possible while still maintaining a high level of comfort and seat support

• Unique blend of variable-density seat foam and SaddleGel™ eases tailbone pressure and improves circulation

• Authentic True Tuck-and-Roll construction, not a quick cross-stitch; seat is covered in genuine leather for a bold look

• Made in the U.S.A.

PROFILER BW SEATS• Slammed two-up seat features narrow styling, a thin profile and low riding height

• Seat design drops the rider down into the bike for the lowest riding position possible, while maintaining our high standard of comfort and support

• Unique blend of variable-density foam and SaddleGel™ eases tailbone pressure and improves circulation

• Contrasting grain, basket weave SaddleHyde™ cover

• Basket weave pattern on driver’s seat provides more breathability and extra grip if needed

• Basket weave is sewn into the slender tail section to accent the low seat styling and profile

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0804-0580 For 96-03 XL models $329.95

BOLERO SEAT• Narrow, thin and clean while still retaining comfort and a touch of style

• Looks great on any 96-03 model Sporty, representing a perfect blend of old and new

• Features controlled density polyurethane foam

• Baseplate is marine grade fiberglass

• RSD metal logo

• Direct bolt-on

• Made in the U.S.A.PART # DESCRIPTION SUG. RETAILFOR 13-15 FXSB1510-0250 Black $132.951510-0251 Chrome $132.95

7" SOLO LUGGAGE RACKS• Bigger and beefier luggage rack that still maintains style

• Matches perfectly with larger fenders

• Outside rails made of heavy .065 tubing; inside rails are 3 ⁄8" solid steel

• Measure approx. 11" long × 7" wide

• Made in the U.S.A.

0802-0852

0802-0853

1510-0250

1510-0251

PART # DESCRIPTION SUG. RETAIL0802-0854 For 06-10 FXST, 07-15 FLSTF/B $325.000802-0852 For 00-05 FXST, FLST (except FXSTD, FLSTN) 325.000802-08561 For 06-15 FLSTC, FLSTN 325.000802-0858 For 07-10 FXSTC 325.001 FLSTN models require removal of seat rail and rear rack.

PART # DESCRIPTION SUG. RETAIL0802-0853 For 06-10 FXST, 07-15 FLSTF/B $310.000802-0851 For 00-05 FXST/FLST (except FXSTD, FLSTN) 310.000802-08551 For 06-15 FLSTC, FLSTN 310.000802-0857 For 07-10 FXSTC 310.001 FLSTN models require removal of seat rail and rear rack.

7

PART # DESCRIPTION SUG. RETAIL0801-0955 For 08-15 FLHT, FLHR, FLTR, FLHX models (301/2" overall × 11" W front × 6" W rear) $339.95

CARL BROUHARD CROSS DESIGN PREDATOR SEAT• Solar-reflective leather in the seating area and automotive-grade vinyl on the

sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

• Features Carl Brouhard cross stitch design

• Molded polyurethane foam interior for maximum comfort

• 3 ⁄16" ABS thermoformed seat base for a perfect fit

• Low-profile Predator design with a lower seating position compared to stock

• Rubber bumpers and fully carpeted bottom to protect paint

• Includes all mounting hardware

• Made in the U.S.A. by Drag Specialties® Seats

PA RT # DESCRIPTION SUG. RETAILFOR 06-10 FXST, 07-15 FLSTF/B0802-0829 Black vinyl $229.95

MinimalIST SOLO• Styled narrow and sleek with minimal back support

• Excellent for the weekend rider who prefers a classic old-school look

• Designed with IST seating technology engineered to reduce the vibration, compression and shock the body feels from riding, to enable longer, more comfortable rides

• Features a highly durable, soft, textured, black vinyl cover with matching black vinyl side panels that will keep their shape across the high-stress points of the seat

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2001-0953 For Bagger Nation Road King raked trees w/ 23" or 26" wheel $449.95

RAKED ROAD KING NACELLE• Designed for use on

raked Road Kings, so owners are not left with a headlight pointing to the sky

• Nacelle corrects the headlight position and adds killer styling

• High-pressure, composite Nacelle perfectly fits Bagger Nation 7° or 9° raked trees and will accept the stock riser cover, cowling spear and headlight assembly

• Comes primed and ready for paint

8

THE DRAG SPECIALTIES

JULY 2015

7" EVOLUTION 2 LED HEADLIGHTS• Direct replacement for most 7" headlights

• Superior visibility, safety and durability

• 1150 lumen output (high beam), 750 lumen output (low beam)

• DOT compliant

• Easy, plug-n-play H4-style connector

• Mount kit required for Dresser applications (sold separately)

• Made in the U.S.A.

NOTE: 14-15 Dressers will require wire harness adapters, PART # 2120-0647 or 2120-0655.

J.W. SPEAKER CORPORATION We’re proud

to welcome another addition to our Drag Specialties family - the J.W. Speaker

Corporation. Founded in 1935 by John W. Speaker, their focus is on developing

innovative, high-performance vehicle lighting for both OEM and aftermarket

customers around the world. One of their specialties is LED lighting that includes

our new additions you see here. And all of their products are proudly designed,

manufactured and assembled

in Germantown WI, U.S.A.

PART # DESCRIPTION SUG. RETAIL2001-1104 Black $390.952001-1105 Chrome 390.952001-1106 Mount kit 79.95

PART # DESCRIPTION SUG. RETAIL2001-1107 Black $240.952001-1108 Chrome 240.95

4.5" LED FOG LIGHTS• Replacement for stock

PAR36 fog lights

• Outperform bulb-based fog lights with superior visibility, extreme durability and unmatched longevity

• Compatible with most fog light housings

• Sold each

• SAE/ECE compliant

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL

2020-1097 For 11-15 Softail, 12-15 Dyna, 14-15 XL, 12-15 FLHX, FLTR and 14-15 FLSTNSE, FXSBSE w/ bullet style turn signals; 1157 front and 1157 rear (no stabilizer)

$194.95

2020-1098 For 11-15 Softail, 12-15 Dyna, 14-15 XL and 14-15 FLHTKSE, FLHTRUSE w/ bullet style turn signals; 1157 front and 1156 rear (no stabilizer) 194.95

2020-1094 For 96-10 Softail, 02-11 Dyna, 97-13 FLHT, FLHR, FLTR, FLTRU (does not fit FLTRX), 06-09 FLHX and 02-03 XL models w/ bullet style turn signals; 1157 front and 1156 rear 269.95

2020-1095 For 96-10 Softail and 97-13 FLHT, FLHR, FLTR models w/ flat style turn signals; 1157 front and 1156 rear 269.95

2020-1096 For 10-13 FLHX/FLTRX Custom models w/ bullet style turn signals; 1157 front and 1157 rear 269.95

2020-1099 For 04-13 Sportster models w/ bullet style turn signals; 1157 front and 1156 rear 269.95

COMPLETE LED TURN SIGNAL CONVERSION KITS• Kits include Dynamic Ringz™ amber front LED turn signals, red rear LED turn signals,

four smoked lenses and plug & play SMART Signal Stabilizer, where applicable

PART # DESCRIPTIONSUG.

RETAIL2040-1701 Red $64.952040-1702 Blue 64.952040-1703 Green 64.952040-1704 Orange 64.952040-1705 Purple 64.952040-1706 White 64.952040-1707 Pink 64.952040-1708 Amber 64.95

MAGICFLEX2® 72 LED FLEXIBLE STRIPS• 39.4" long

• High-output, surface-mount 5050 LEDs

• Three high-output 5050 LEDs per inch

• 120° degree viewing angle

• Conformal-coated for 100% waterproof

• Great for trike wheel wells

• Available in multiple colors

• Sold each

2020-1096

2020-1097

2020-1095

2001-1107

2001-1108

2001-1105

2001-1104

2001-1106

2040-1701

9

ILLUMINATOR PLUG-IN STYLE RUN, BRAKE AND TURN SIGNAL MODULE• Compatible with TSM/TSSM modules and security systems

• Turns stock or custom turn signals into running lights and brake lights; still maintains turn signal function

• Increases visibility of the motorcycle from the rear

• Built-in load equalizer works with stock signals and can run the smallest custom signals, even LEDs

• Comes with easy-to-follow instructions and features plug-in connectors for hassle-free installation on select models

• Works with incandescent, halogen and 12V LED signals and markers

• Made in the U.S.A.

PLUG-IN AUTOMATIC TURN SIGNAL CANCELER• Plugs in and replaces the OEM signal canceler

• Does not require stock speedometer for proper operation

• Automatically flashes for 11 seconds; can be manually canceled at any time

• Built-in emergency flasher mode

• Built-in load equalizer runs LEDs of up to 50W per side

• Measures 27⁄8" L × 13 ⁄8" W × 7⁄8" D

• Made in the U.S.A.

NOTE: Be sure to identify which connector is on the bike before purchasing, as the factory was not consistent during 1994-2000.

HEADWINDS Owners Joel

and Julie Felty, along with all of the expert

craftsmen at Headwinds, have proudly

provided the highest quality lighting available

anywhere to custom motorcycle and hot-rod

builders since 1992. Their headlights feature

smooth, non-wavy surfaces with mirror-like

finishes along with innovations that do away

with exposed rivets, bolts, and flanges. All of

these features add up to the perfect choice for

your custom builders or riders who want the

finest in modern classically-styled lighting.

PART # DESCRIPTION SUG. RETAIL2060-0474 For 03-15 FXST, FXD/FXDWG, 98-13 FLTR $99.95

H4 LED HEADLIGHT BULB• Brighter and whiter than halogen bulbs

• Dual-beam LED, 25W low/50W high

• 12-14V, 3,000 lumens, 6,000° Kelvin color temperature

• Kit includes bulb, driver, three-prong connector and cooling ribbon heat sink

• Cooling ribbon improves LED performance and longevity

• Fits H4 and HB2 lamps with P43T flange base

• Recommended for 53/4" diameter headlamp assemblies

NOTE: Not DOT certified.

PART # DESCRIPTION SUG. RETAIL2050-0214 For 91-93 FLHT models $118.95

PART # DESCRIPTION SUG. RETAIL

2050-0215 Female Deutsch style 8-pin plug for 94-00 models w/o Delphi TSM

$94.95

10

THE DRAG SPECIALTIES

JULY 2015

PART # DESCRIPTION SUG. RETAILFOR 13-15 FXSB2010-1239 W/ red lens $129.952010-1240 W/ smoke lens 129.95

LED TAILLIGHT• Light assembly fits neatly under

the rear edge of the OEM rear fender

• Dual-function design

• Available with red or smoked lens

• Simple three-wire hookup (requires hardwiring)

PART # DESCRIPTION SUG. RETAILFOR 84-E96 MODELS, 82-83 FXR, 83-84 FX/FXWG/FLH, 83-85 XL0703-0688 Chrome, vented $38.950703-0689 Chrome, non-vented 38.950703-0690 Gloss black, vented 38.950703-0691 Gloss black, non-vented 38.95

SCREW-IN LOCKING SKULL GAS CAPS• Key slot is hidden under the skull to keep dirt and debris out of the lock

• Available in chrome with chrome skull or gloss black with chrome skull

• Come with two keys

• Caps sold each

PART # DESCRIPTION SUG. RETAIL0420-0003 For 01-05 FXD, 01-15 FXST/FLST $24.95

CHROME FORK LOCK• Includes two keys

PART # DESCRIPTION SUG. RETAILFRONT

1731-0417 For 14-15 XL, 15 Softails, single disc models, 7⁄16" bore (non-ABS); repl. OEM #41700087

$29.95

1731-0418 For 14-15 XL dual disc models, 1/2" bore (non ABS); repl. OEM #41700088 29.951731-0420 For 14-15 XL single disc models (ABS); repl. OEM #41700084 29.95REAR1731-0419 For 14-15 XL; repl. OEM #41700097 29.95

MASTER CYLINDER REBUILD KITS• Meet or exceed OEM specifications

PART # DESCRIPTION SUG. RETAIL

0603-0555

5 ⁄16"-18 handlebar screws w/ spacers; repl. OEM #s 4326A, 5736

$6.95

HANDLEBAR CLAMP SCREWS WITH SPACERS• For 84-15 models with 31/2" on-center

risers and offset mounting holes

• Spacers allow installation of clamp-mounted gauges on most clamps with recessed screws

• Chrome finish

• Sold in pairs

1731-0417

1731-0418

1731-0419

1731-0420

2010-1239

2010-1240

0703-0688

0703-0691

11

PART # DESCRIPTION SUG. RETAILFOR 08-15 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE1010-1669 Contrast Cut $419.951010-1671 Chrome 419.951010-1672 Black Ops 419.95

PART # DESCRIPTION SUG. RETAILFOR 01-15 TWIN CAM W/ DELPHI EFI (EXCEPT 08-15 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES); 93-06 BIG TWIN W/ CV CARBURETOR1010-1665 Contrast Cut $419.951010-1667 Chrome 419.951010-1668 Black Ops 419.95

PART # DESCRIPTION SUG. RETAILFOR 91-15 XL W/ DELPHI EFI OR CV CARBURETOR1010-1673 Contrast Cut $419.951010-1675 Chrome 419.951010-1676 Black Ops 419.95

PART # DESCRIPTION SUG. RETAIL0926-2723 For 05-15 Big Twin $129.950926-2722 For 84-04 Big Twin 119.95

.585" VALVE SPRING KIT• Unique S&S design

dual-spring kit reduces the risk of valve float

• For valve lift to .585" with 1.800"/130 lb. installed height, 325 lb. at max lift

• Includes springs, top and bottom collars, keeper shims and valve seals

• Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3801-0261 For L77-84 Shovelhead $14.95

TAPPET BLOCK/OIL PUMP ALIGNMENT TOOL• Use whenever tappet blocks are removed,

or even just loosened

• Tappet blocks do not have counter-bored bolt holes; therefore, they should be reinstalled using an alignment tool to ensure that the lifters track properly on the camshaft

• This tool ensures the durability of your installation work and makes the process quick and easy

• Two tools required required for Twin Cam oil pump installation

• Sold each

0926-2722

0926-2723

Chrome

Black Ops

Contrast Cut

DRIVE AIR CLEANERS• Design boasts an industrial polygon shape that

follows the line of the V-Twin

• Detail accents give an organic look

• High-volume, high-flow K&N® air filter to boost power

• Internal crankcase venting system

• CNC-machined cover available in multiple finishes

FITS MODEL REPLACES OEM # BLACK SUG. RETAIL CHROME SUG. RETAILFor 84-90 FLT, 84-94 FXR, 84-99 Softail, 86-15 XL, 09-12XR 1200 63796-77A, 63805-80A 0712-0477 $8.95 0712-0478 $11.95For 97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W, 94-02 Thunderbolt S2/S2T/S3/S3T 63805-80A 0712-0477 8.95 0712-0478 11.95

RACING OIL FILTERS• The original Hiflofiltro factory was founded in 1955

and has been manufacturing filters for the OEM motor industry since 1963

• With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world

• TÜV approved and production monitored to ensure OEM or better quality

• Constructed using the best materials available

• Filters include a heavy-duty steel casing and a welded hex nut for easier removal and installation; filters are race track ready and pre-drilled for securing with safety wire, and include high-performance tri-fiber filter media for optimum filtration and consistent oil flow, along with a premium rubber relief valve for 100% seal and are compatible with all oil types

0712-0477

• Contrast Cut™ finish starts with a polished face plate that has been black-anodized, then re-cut to open up the design

• Black Ops™ finish features a gloss black powdercoat on top of a contrasting, textured black finish for outstanding durability and great looks

• Show-chrome finish also available

• Mounting hardware included

• Made in the U.S.A.

NOTE: Not legal for street use on pollution-controlled vehicles.

THE DRAG SPECIALTIES

JULY 2015

12 9901-1673

V-LINE FOOTPEGS AND SHIFTER/BRAKE PEGS• Made from CNC-machined T-6 billet aluminum

• Add a subtle and clean finishing touch

• Includes mounting hardware

• Small footpegs measure 41/2" L × 1" dia.; large footpegs measure 51/4" L × 11/2" dia.

• Footpegs sold in pairs; shifter and brake pegs sold each

• Made in the U.S.A.

NOTE: Will not fit 13-15 FXSB/SE, 11-13 FXS, 08-11 FXCW/C or 13-15 XL1200V/XL1200X/XL1200C models.

V-LINE FLOORBOARDS• CNC-machined

• Longer design to provide more comfort

• Clean design with knurled centers for added grip

• Driver floorboards measure 14" × 3"

• Passenger floorboards measure 7.5" × 4.5"

• Made in the U.S.A.

NOTE: FLST/FLD models w/ passenger footpegs will require the use of OEM accessory floorboard mounts.

PART # DESCRIPTION SUG. RETAILFOR 84-15 FLT/FLHT/FLHR/FLTR, 09-13 H-D FL TRIKE, 86-15 FLST, 12-15 FLD MODELS1621-0651 Driver floorboards, reverse cut $489.951621-0652 Driver floorboards, chrome 489.95FOR 86-15 FLT/FLHT/FLHR/FLTR/FLST, 12-15 FLD MODELS1621-0653 Passenger floorboards, re-machined 449.951621-0654 Passenger floorboards, chrome 449.95

PART # DESCRIPTION SUG. RETAILMALE MOUNT FOOTPEGS1620-1326 Small, re-machined $139.951620-1327 Small, chrome 139.951620-1328 Large, re-machined 139.951620-1329 Large, chrome 139.95SHIFTER PEGS1603-0281 Black 54.951603-0282 Chrome 54.95BRAKE PEGS1610-0458 Black 59.951610-0459 Chrome 59.95

PART # DESCRIPTION SUG. RETAIL1620-1366 Mini MX-style footpegs $114.95

MINI MX-STYLE FOOTPEGS• Heavy duty steel construction

• Narrow, male-mount design provides a nice, balanced feel

• Measure 3.40" L × 1.67" W

• A serrated edge will keep your feet planted

• Powder-coated satin black finish

• Sold in pairs

NOTE: Will not fit 13-15 FXSB/SE, 11-13 FXS, 08-11 FXCW/C, 13-15 XL1200C/V/X models.

PART # DESCRIPTION SUG. RETAIL1603-0292 Chrome $61.951603-0293 Black anodized 61.95

PLATINUM CUT SERIES SHIFTER PEGS• Chrome-plated or black anodized

CNC-machined 6061 billet aluminum

• Features Platinum Cut design

• Sold each

• Made in the U.S.A.

1603-0293

1603-0292

1621-0654

1603-0282

1610-0458

1620-1329

1603-0281

1621-0651