Perfect Machine for Medium to Heavy Industrial Work · 2019. 1. 17. · 800-392-3015 | welder |...
Transcript of Perfect Machine for Medium to Heavy Industrial Work · 2019. 1. 17. · 800-392-3015 | welder |...
-
800-392-3015 | www.americaneagleacc.com
welder | generator | air compressor | battery booster
ALL-IN-ONE POWER SYSTEM®
Perfect Machine for Medium to Heavy Industrial WorkThe Air N Arc® 250 offers the power you require for all of your mobile workshop needs. Electric power tools or applications that have a maximum continuous air capacity to operate a 1” impact wrench or welding for medium to heavy industrial repair.
SPECIFICATIONSEngine 23 HP EFI Kohler
Compressor Type Reciprocating
Generator Wattage 5,000 continuous watts AC power 120V/240V
Welder Amperage High frequency welding CC/DC CV/DC 30-250 Amps operating range 250 Amps at 100% duty cycle
Battery Charge/Booster 300 Amps 12V charge and 12V/24V boost
Max Pressure (psi) 175
CFM Rating 24 CFM
Air Storage Capacity 30-gallon or remote tank
Drive System Dual V-belt/serpentine
Fuel Capacity (gal) 12
Weight (lbs.) 500-725
Dimensions (Skid - in.) 48.125L x 23.125W x 27H
Dimensions (30 gal - in.) 48.125L x 24W x 43H
Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
®
-
What work trucks are built around.
740 North State StreetP.O. Box 169Garner, IA 50438Telephone: 641-923-2425 • 800-392-3015Fax: 641-923-9099Internet: www.americaneagleacc.comE-mail: [email protected]
SPECIAL FEATURES
• Will fit on side pack or behind cab
• Totally self-contained but can be integrated with the chassis
• Powder coated galvannealed sheet metal
• All the benefits of a high frequency welder offering excellent weld characteristics - 100% duty cycle
• Galvannealed steel
• Heavy duty belt drive system for anti-vibration and long service intervals
AIR COMPRESSOR
• Reciprocating compressor
• 24 CFM
• 175 max PSI
• Two stage cast iron air pump for high pressure output
WELDER
• High frequency welding CC/DC CV/DC 30-250 Amps operating range 250 Amps at 100% duty cycle
• 100% completely controllable. No preset settings.
• Independent welding generator
• CV/DC 15-40V on remote panel machines
• Safe multi-function
• Auto throttle control
GENERATOR
• True (2) generator system for safe multi-functioning of welder and electric tools
• 5000 continuous watts @ 60 Hz
• Independent AC power for safe multi-functioning
• Brushless
• Smooth wave power with minimal distortion
BATTERY BOOST/CHARGE
• 12V/24V boost/charge
REMOTE CONTROL PANEL
• Provides ultimate user convenience and safety
• All functions accessible at panel. No need to jump in and out of vehicle
ENGINE
• 25 HP EFI Kohler
• Electric start
• 12-gallon fuel tank
AVAILABLE IN:
• 8-gallon, 30-gallon, or remote tank configuration
OPTIONS/ACCESSORIES
• Battery booster cables
• Remote air tank – 30-gallon
• Electric fuel pump
• Remote condensation drain
• Hose reels
• Cold weather kits
• Maintenance kits
• Hose reels
• GFCI outlet for protection of 120V/240V - remote panel machines only
*Specifications may change without notification.Vanair®, ALL-IN-ONE® and Air N Arc® are registered trademarks of Vanair Manufacturing Inc.
Copyright © 2016 American Eagle Accessories Group.
1/19
®
-
800-392-3015 | www.americaneagleacc.com
welder | generator | air compressor | battery booster
ALL-IN-ONE POWER SYSTEM®
Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
SPECIFICATIONSEngine Gas: 27 HP EFI Kohler, Air Cooled Diesel: 25 HP Kubota, Liquid Cooled
Compressor Type Rotary screw
Generator Wattage 7000 peak - 6800 continuous watts 120V and 240V outlets
Welder Amperage High frequency welding CC/DC CV/DC 30-300 Amps operating range
270 Amps at 100% duty cycle
Battery Charger/Booster 300 Amps 12V charge and 12V/24V boost
Max Pressure (psi) 175
CFM Rating 40 CFM at high speed, 30 CFM at idle
Drive System Belt driven
Fuel Capacity (gal) 12
Weight (lbs.) Gas: 700 Diesel: 870
Dimensions (in.) Gas: 47L x 21W x 31H Diesel: 47L x 21W x 33H
Providing 300 amps of welding power and 40 cfm of on-demand air, the Air N Arc® 300 is compact enough to fit a truck’s side-pack or be mounted behind the cab. The totally self-contained unit delivers more efficient use of truck space and can be integrated with the chassis for maximum versatility. Featuring the market’s only remote panel for a diesel ALL-IN-ONE Power System®, it provides ultimate user convenience and safety. Designed for maximum fuel efficiency, the system offers the power you need for all your mobile workshop needs.
Available in Gas and Diesel
The Lightest, Most Compact Rotary Screw ALL-IN-ONE Power System® on the Market
®
-
What work trucks are built around.
740 North State StreetP.O. Box 169Garner, IA 50438Telephone: 641-923-2425 • 800-392-3015Fax: 641-923-9099Internet: www.americaneagleacc.comE-mail: [email protected]
AIR COMPRESSOR• Rotary screw compressor for air on demand• 40 CFM @ 100 PSI• 175 max PSI
WELDER• High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle• Independent DC welder• Safe multi-function capabilities• Auto throttle control• CV Mig capabilities, 15-40V DC
GENERATOR• 6800 continuous watts @ 60 Hz (available in 5700 continuous watts @ 50 Hz)• Independent AC power for safe multi-functioning• Brushless• Smooth wave for minimal distortion
BATTERY BOOST/CHARGE• 12V charge• 12V/24V boost
SPECIAL FEATURES• TRUE 2 generator system for safe multi-function of welder and electric tools• All the benefits of a high frequency
welder offering excellent weld characteristics
• CV MIG capability• One unit to start all your equipment
with battery charge and boost capability offering: 12V charge,
12V /24V boost• 40 cfm rotary screw compressor for
air on demand and extended life of unit• Heavy-duty belt drive system for anti-vibration and long service intervals• Control panel can be remotely mounted for the ultimate in user convenience• Totally self-contained, but can be integrated with the chassis for maximum versatility• Integrated lift hook and battery tray• Designed for easy maintenance• Small dimensions allow unit to fit on
a side pack or be mounted behind the cab
• Powder coated sheet metal• Galvannealed steel
ENGINE• Gas: 29 HP EFI Kohler air cooled Diesel: 25 HP Kubota liquid cooled• Reliable and easy start• Electric start• 12-gallon fuel tank• Saves fuel by providing power with
vehicle’s engine off• Tier 4 emission compliant• Glow plugs
OPTIONS/ACCESSORIES• Battery booster cables • Cable extension segment • Remote air tank – 30-gallon• Remote condensation drain• Maintenance kits• Cold weather kits• GFI kit available
*Specifications may change without notification.Vanair®, ALL-IN-ONE® and Air N Arc® are registered trademarks of Vanair Manufacturing Inc.
Copyright © 2016 American Eagle Accessories Group.
1/19
®
-
800-392-3015 | www.americaneagleacc.com
welder | generator | air compressor | battery booster
ALL-IN-ONE POWER SYSTEM®
The latest Air N Arc® All–In-One Power System® features the innovation of being hydraulically driven, while still offering all the advantages of the Air N Arc® 300 engine drive systems including a 40 cfm rotary screw for on-demand air, a 300 amp welder, 300 amp 12V charge and 12V/24V boost, and a 7kW generator. Designed as a true two generator system, the Air N Arc® 300H allows simultaneous dual functionality such as welding and generator for lights for nighttime service. The system offers a small footprint for side pack or behind the cab mounting and is ideal for trucks with hydraulics already installed, such as crane trucks.
SPECIFICATIONSDrive System Open hydraulic
Hydraulic Requirements 19 gpm @ 2800 psi multifunction / 14.5 gpm @ 2500 psi single function
Max Pressure (psi) 175
CFM Rating 40 CFM at high speed, 30 CFM at idle
Compressor Type Rotary screw
Generator Wattage 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets
Welder Amperage High frequency welding CC/DC CV/DC 30-300 Amps operating range
270 Amps at 100% duty cycle
Battery Charger/Booster 300 Amps 12V charge and 12V/24V boost
Dry Weight (lbs.) 595
Dimensions (in.) 47L x 21W x 31H
Ratings above are approximate and are based on 120° F hydraulic fluid temperature. Add 400 psi minimum to hydraulic requirements for hydraulic system peak pressure ratings. Machine hydraulic relief valve is set at 3200 psi. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
The Lightest, Most Compact Rotary Screw ALL-IN-ONE Power System® on the Market
®
-
What work trucks are built around.
740 North State StreetP.O. Box 169Garner, IA 50438Telephone: 641-923-2425 • 800-392-3015Fax: 641-923-9099Internet: www.americaneagleacc.comE-mail: [email protected]
HYDRAULIC SYSTEM REQUIREMENTSAmerican Eagle highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
• The hydraulic flow and pressure requirements of the air compressor• When the compressor is running there is a continuous hydraulic load• The duty cycle and ambient operating temperatures• Other hydraulic equipment which may share the same hydraulic supply system (American
Eagle recommends a dedicated pump and hydraulic circuit)
AIR COMPRESSOR• Rotary screw compressor - encapsulated• 40 CFM @ 100 PSI• 175 max PSI
WELDER• High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle• 15-40V DC• Independent DC welder• Safe multi-function
GENERATOR• 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets• Independent AC power for safe multi-functioning• Brushless• Smooth wave for minimal distortion
SPECIAL FEATURES• Single function 14.5 GPM model is suitable for Ford 4X4 Super Duty and Dodge Trucks• TRUE 2 generator system for safe multi-function of welder and electric tools• Integrated hydraulic cooler• All the benefits of a high frequency
welder offering excellent weld characteristics
• CV MIG capability• One unit to start all your equipment
with battery charge and boost capability offering: 12V charge,
12V /24V boost• 40 CFM rotary screw compressor for
air on demand and extended life of unit• Heavy-duty belt drive system for anti-vibration and long service intervals• Control panel can be remotely mounted for the ultimate in user convenience• Integrated lift hook• Designed for easy maintenance• Small dimensions allow unit to fit on
a side pack or be mounted behind the cab
• Powder coated sheet metal• Galvannealed steel
BATTERY BOOST/CHARGE• 12V charge• 12V/24V boost
OPTIONS/ACCESSORIES• Battery booster cables • Cable extension segment • Remote air tank – 30-gallon• Remote condensation drain• Maintenance kits• Compressor air inlet heater
*Specifications may change without notification.Vanair®, ALL-IN-ONE® and Air N Arc® are registered trademarks of Vanair Manufacturing Inc.
Copyright © 2016 American Eagle Accessories Group.
1/19
®
-
800-392-3015 | www.americaneagleacc.com
welder | generator | air compressor | battery booster/charge | hyd. pump
ALL-IN-ONE POWER SYSTEM®
Inclusive, innovative, indispensable The inclusive, innovative, indispensable Air N Arc® I-300 is the first system in the world to offer six forms of power in a single 48” unit. Based on the technology of the Air-N-Arc® 300 diesel system, it provides an integrated 40 cfm rotary screw compressor, 7kW AC generator, 300 amp welder, battery booster and battery charger, with the newly added power of a 10.5 gpm hydraulic pump...all driven by a single engine. Designed to provide full functionality with the truck engine off, mechanics can remain productive in all areas of their workday. The Air N Arc® I-300 offers enough power to run a crane and the technology to integrate with the crane control.
SPECIFICATIONSEngine 25 HP Kubota, Liquid Cooled
Compressor Type Rotary screw
Max Pressure (psi) 175
CFM Rating 40 CFM at high speed, 30 CFM at idle
Fuel Tank (gal.) 12
Generator Wattage 7000 peak - 6800 continuous watts
120V GFCI and 240V outlets
Hydraulic Output - Piston Pump Up to 13 gpm, up to 3000 PSI
Welder Amperage High frequency welding CC = 30-300 amps, CV = 15-40V operating range
270 amps at 100% duty cycle
Battery Charger/Booster 300 amps 12V charge and 12V/24V boost
Drive System Belt driven
Dry Weight (lbs.) 910
Dimensions (in.) 47L x 21W x 33H
Ratings above are approximate and are based on 120ºF hydraulic fluid temperature. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
®
-
What work trucks are built around.
740 North State StreetP.O. Box 169Garner, IA 50438Telephone: 641-923-2425 • 800-392-3015Fax: 641-923-9099Internet: www.americaneagleacc.comE-mail: [email protected]
AIR COMPRESSOR• Rotary screw compressor - encapsulated• 40 CFM @ 100 PSI; 30 CFM @ idle• 175 max PSI
WELDER• High frequency welding CC/DC CV/DC
30-300 Amps operating range 270 Amps at 100% duty cycle• Independent welding generator• Safe multi-function• Auto throttle control• CV mig capability, 15-40V DC Power
GENERATOR• 7000 peak - 6800 continuous watts 120V GFCI and 250V outlets• Independent AC power for safe multi-functioning• Brushless• Smooth wave
BATTERY BOOST/CHARGE• 12V charge• 12V/24V boost• Capable of jump starting your truck’s engine• Maintains truck’s battery and operates work and emergency lights while engine is off
HYDRAULIC PUMP• Up to 10.5 GPM• 3000 maximum PSI• Variable displacement hydraulic piston
pump compatible with both an open center and closed center system
ENGINE• 25 HP Kubota engine, liquid cooled• Electric start• Glow plug
OPTIONS/ACCESSORIES• Battery booster cables • Cable extension segment • Remote air tank – 30-gallon • Remote condensation drain• Hose reels• Cold weather kits• Maintenance kits• Hose reels• GFCI outlet for protection of
120V/240V - remote panel machines only
SPECIAL FEATURES• One unit incorporates air compressor,
generator, battery booster, battery charger, welder and hydraulic pump. No need for auxiliary plug-in welder or battery booster
• Reliable and easy electric starting Kubota engine• Heavy-duty belt drive system for anti-vibration and long service intervals• Includes electric fuel pump for easy install• One unit to start all your equipment with battery charge and boost capability
offering: 12V charge, 12V /24V boost. Capable of charging vehicle’s battery.
• True 2 generator system for safe multi- function of welder and electric tools
• CV MIG capability• All the benefits of a high frequency welder offering excellent weld characteristics• Throttle control for weld/battery boost function• Rotary screw compressor for air on demand offering: 40 cfm at high speed and 30 cfm at idle• Integrated lift hook and battery tray• Battery isolator switch• Starter isolator switch• Battery jump start receptacle• Manual reset circuit breakers• Control panel can be remotely mounted for the ultimate user convenience• Designed for easy maintenance and fuel efficiency• Small dimensions allow unit to fit on a side back or be mounted behind the cab• Powder coated sheet metal• Galvannealed canopy
*Specifications may change without notification.Vanair®, ALL-IN-ONE® and Air N Arc® are registered trademarks of Vanair Manufacturing Inc.
Copyright © 2016 American Eagle Accessories Group.
1/19
®
-
800-392-3015 | www.americaneagleacc.com
welder | generator | air compressor | battery booster/charge | hyd. pump | hyd. reservoir
ALL-IN-ONE POWER SYSTEM®
with Hydraulic Reservoir
Six forms of power on a single platform for transferability and flexibilityThe new Air N Arc® I-300 with an integrated hydraulic reservoir provides you with air, generator, welding, hydraulic pump and battery boost and charge on a single self-contained platform. Fully functional on and off your vehicle, the new system is ideal for all your field service and hydraulic tool needs.
SPECIFICATIONSEngine 25 HP Kubota, Liquid Cooled (Tier 4 compliant)
Compressor Type Rotary screw
CFM Rating 40 CFM at high speed, 30 cfm at idle
Max Pressure (psi) 175
Fuel Tank (gal.) 12
Generator Wattage 7000 peak - 6800 continuous watts
120V GFCI and 240V outlets
Hydraulic Output - Piston Pump Up to 13 gpm
Welder Amperage High frequency welding CC = 30-300 amps, CV = 15-40V operating range
270 amps at 100% duty cycle
Battery Charger/Booster 300 amps 12V charge and 12V/24V boost
Drive System Belt driven
Wet Weight (lbs.) 1600
Dimensions (in.) 72L x 21W x 43H with platform
Ratings above are approximate and are based on 120ºF hydraulic fluid temperature. Consult Vanair for specific details. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
®
-
What work trucks are built around.
740 North State StreetP.O. Box 169Garner, IA 50438Telephone: 641-923-2425 • 800-392-3015Fax: 641-923-9099Internet: www.americaneagleacc.comE-mail: [email protected]
with Hydraulic Reservoir
AIR COMPRESSOR• Rotary screw compressor - encapsulated• 40 CFM @ 100 PSI; 30 CFM @ idle• 175 max PSI
WELDER• 30-300 amps high frequency CC/DC, CV/DC, 270 Amps 100% duty cycle• Independent welding generator• Safe multi-function• Auto throttle control• CV mig capability, 15-40V DC Power
GENERATOR• 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets• Independent AC power for safe multi-functioning• Brushless• Smooth wave
BATTERY BOOST/CHARGE• 12V charge• 12V/24V boost• Capable of jump starting your truck’s engine • Maintains truck’s battery and operates work and emergency lights while engine is off
HYDRAULIC PUMP• Up to 10.5 GPM• 3000 maximum PSI
HYDRAULIC RESERVOIR• 20 gal reservoir with filter, oil level sight
glass and temperature gauge
ENGINE• 25 HP Kubota engine, liquid cooled• Electric start• 12 gal fuel tank• Saves fuel by providing power with vehicle’s engine off
SKID MOUNT• Includes fork lift pockets for easy transferability
OPTIONS/ACCESSORIES• Battery booster cables • Cable extension segment • Remote air tank – 30 gal • Remote condensation drain• Hose reels• Cold weather kits• Maintenance kits• Hose reels
SPECIAL FEATURES• One unit incorporates air compressor,
generator, battery booster, battery charger, welder and hydraulic pump. No need for auxiliary plug-in welder or battery booster.
• Reliable and easy electric starting Kubota engine• Heavy duty belt drive system for anti-vibration and long service intervals• One unit to start all your equipment with
battery charge and boost capability offering: 12V charge, 12V /24V boost.
Capable of charging vehicle’s battery.• True 2 generator system for safe multi-
function of welder and electric tools
• CV MIG capability• All the benefits of a high frequency welder offering excellent weld characteristics• Throttle control for weld/battery boost function• Rotary screw compressor for air on demand offering: 40 CFM at high speed and 30 CFM at idle• Integrated lift hook and battery tray• Battery isolator switch• Starter isolator switch• Battery jump start receptacle• Manual reset circuit breakers• Variable displacement hydraulic piston pump compatible with both an open center and closed center system• Designed for easy maintenance and fuel efficiency• Powder coated sheet metal• Galvannealed canopy
*Specifications may change without notification.Vanair®, ALL-IN-ONE® and Air N Arc® are registered trademarks of Vanair Manufacturing Inc.
Copyright © 2016 American Eagle Accessories Group.
1/19
®
AE_airnarc250AE_airnarc300g&dAE_airnarc300hAE_airnarcI-300AE_airnarcI-300hydres