Perfect Fitâ„¢ Solvent Weld DWV Fittings D Injection Molded in
Transcript of Perfect Fitâ„¢ Solvent Weld DWV Fittings D Injection Molded in
Perfect Fit™ Solvent Weld DWV FittingsInjection Molded in Sizes 4” – 12” Fabricated in Sizes 10” – 24”
Short Specs
4” through 12” injection molded solvent weld Drain, Waste, and Vent
(DWV) fittings shall be manufactured in accordance with ASTM D2665,
F1866, F2135, and CSA B181.2, as applicable. Injection molded
solvent weld DWV fittings shall be certified by the National Sanitation
Foundation (NSF) to meet ASTM D2665, F1866, and ASTM F2135, as
applicable; and by the Canadian Standards Association (CSA) to meet
CSA B181.2 as applicable. They shall be certified by the International
Association of Plumbing and Municipal Officials (IAPMO) to meet the
requirements of the Uniform Plumbing Code (UPC), as applicable.
ATTENTION: Plastic Trends fittings are not to be used with
compressed air or gases. Plastic Trends does not recommend that
piping systems that include its products be tested with compressed air
or gases.
Applications
The most complex installations require the most advanced fittings.
Injection molded Perfect Fit™ DWV fittings from Plastic Trends
eliminate typical problems resulting from installing a DWV system
with inconsistent, inaccurate, or non-certified fittings. When installing
or specifying Perfect Fit™ DWV you can count on a 45° bend being
exactly that, a 45° bend. Literally from every angle, Plastic Trends
understands the importance of accuracy and consistency on the job
site and provides you with a perfect fit from roof to grade.
Perfect Fit™ DWV fittings make installation of the system quicker,
easier and less costly. Productivity gains are significant when Perfect
Fit™ DWV fittings are specified and installed. Combine with our
fabricated fittings to ensure a trouble-free installation.
Certifications
Perfect Fit™ PVC Solvent Weld DWV Molded Fittings are third party
tested and listed by NSF, UPC, and CSA to meet specifications
defined in ASTM D 2665, F 1866, and CSA B181.2, where applicable.
Fabricated fittings conform to ASTM F 1866.
Product Spotlights
Test Tees
Plastic Trends is the only manufacturer to offer molded threaded test
tees with plugs available up to 12” in diameter featuring the most
compact branch in the industry. Test tees are commonly used in
DWV systems around columns or in raceways because it is in these
areas where space is often a critical factor. Plastic Trends’ test tees
are offered with a raised or countersunk plug. Refer to page D2 for
available configurations and pricing.
Fit-Rite™ PVC Adjustable Floor Flange
An exclusive addition to the Plastic Trends Perfect Fit™ DWV product
line. Plastic Trends is the only manufacturer to offer this innovative
product. Adjustable to any floor height whether it is tile over concrete or
linoleum over plywood. It can be reduced with a 4” x 3” coupling or a 4”
x 3” 90˚ closet bend and still fit in a 2” x 10” joist. Refer to page D8 for
available configurations and pricing.
D
Third Party Tested
Sam Roberts & Associates, Inc.www.StanRoberts.com
South Texas3300 CapitolHouston, Texas 77003-3305713-224-9845800-392-6583Fax: 713-224-3611
North Texas1220 Round Table Dr.Dallas, Texas 75247-3504214-637-2816800-462-1195Fax: 214-688-4155
Page D2* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Plastic Trends, Inc. Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Straight Tee HxHxH 45 Degree Wye HxHxH *4 x 4 D104 7 - 44.47 *4 x 4 D304 5 - 45.58 *6 x 4 D106-4 5 50 110.93 *6 x 4 D306-4 4 - 116.48 *6 x 6 D106 4 - 120.87 *6 x 6 D306 2 - 130.87 *8 x 4 D108-4 4 - 142.05 *8 x 4 D308-4 3 - 153.80 *8 x 6 D108-6 2 - 157.62 *8 x 6 D308-6 2 - 170.23 *8 x 8 D108 2 - 197.16 *8 x 8 D308 2 - 223.57 *10 x 4 D1010-4 1 12 248.19 *10 x 4 D3010-4 1 - 272.71 *10 x 6 D1010-6 1 10 305.38 *10 x 6 D3010-6 1 - 353.75 *10 x 8 D1010-8 1 10 342.61 *10 x 8 D3010-8 1 - 418.60 *10 x 10 D1010 1 10 386.58 *10 x 10 D3010 1 - 478.76 *12 x 4 D1012-4 1 8 335.58 *12 x 4 D3012-4 1 - 422.38 *12 x 6 D1012-6 1 8 383.17 *12 x 6 D3012-6 1 - 461.16 *12 x 8 D1012-8 1 8 438.27 *12 x 8 D3012-8 1 - 547.68 *12 x 10 D1012-10 1 7 522.95 *12 x 10 D3012-10 1 - 613.32 *12 x 12 D1012 1 6 642.67 *12 x 12 D3012 1 - 777.72 14 x 4 D1014-4 1 - 761.93 14 x 4 D3014-4 1 - 903.67 14 x 6 D1014-6 1 - 868.01 14 x 6 D3014-6 1 - 986.29 14 x 8 D1014-8 1 - 914.47 14 x 8 D3014-8 1 - 1,032.54 14 x 10 D1014-10 1 - 1,049.86 14 x 10 D3014-10 1 - 1,134.54 14 x 12 D1014-12 1 - 1,253.47 14 x 12 D3014-12 1 - 1,371.05 14 x 14 D1014 1 - 1,372.49 14 x 14 D3014 1 - 1,491.06 16 x 4 D1016-4 1 - 937.53 16 x 4 D3016-4 1 - 1,055.86 16 x 6 D1016-6 1 - 1,047.10 16 x 6 D3016-6 1 - 1,162.01 16 x 8 D1016-8 1 - 1,115.45 16 x 8 D3016-8 1 - 1,233.04 16 x 10 D1016-10 1 - 1,318.84 16 x 10 D3016-10 1 - 1,437.05 16 x 12 D1016-12 1 - 1,367.14 16 x 12 D3016-12 1 - 1,485.42 16 x 14 D1016-14 1 - 1,474.06 16 x 14 D3016-14 1 - 1,592.19 16 x 16 D1016 1 - 1,599.50 16 x 16 D3016 1 - 1,716.65 18 x 4 D1018-4 1 - 1,275.19 18 x 4 D3018-4 1 - 1,392.27 18 x 6 D1018-6 1 - 1,362.74 18 x 6 D3018-6 1 - 1,450.85 18 x 8 D1018-8 1 - 1,424.51 18 x 8 D3018-8 1 - 1,509.40 18 x 10 D1018-10 1 - 1,475.61 18 x 10 D3018-10 1 - 1,626.39 18 x 12 D1018-12 1 - 1,487.17 18 x 12 D3018-12 1 - 1,684.78 18 x 14 D1018-14 1 - 1,533.84 18 x 14 D3018-14 1 - 1,743.34 18 x 16 D1018-16 1 - 1,595.18 18 x 16 D3018-16 1 - 1,895.44 18 x 18 D1018 1 - 2,038.97 18 x 18 D3018 1 - 2,140.92 20 x 4 D1020-4 1 - 1,530.36 20 x 4 D3020-4 1 - 1,670.70 20 x 6 D1020-6 1 - 1,635.63 20 x 6 D3020-6 1 - 1,741.04 20 x 8 D1020-8 1 - 1,705.92 20 x 8 D3020-8 1 - 1,811.27 20 x 10 D1020-10 1 - 1,776.13 20 x 10 D3020-10 1 - 1,951.54 20 x 12 D1020-12 1 - 1,790.12 20 x 12 D3020-12 1 - 2,021.80 20 x 14 D1020-14 1 - 1,846.20 20 x 14 D3020-14 1 - 2,166.70 20 x 16 D1020-16 1 - 1,914.04 20 x 16 D3020-16 1 - 2,274.54 20 x 18 D1020-18 1 - 2,446.74 20 x 18 D3020-18 1 - 2,569.08 20 x 20 D1020 1 - 2,531.89 20 x 20 D3020 1 - 2,658.49 24 x 4 D1024-4 1 - 2,784.54 24 x 4 D3024-4 1 - 2,923.77 24 x 6 D1024-6 1 - 3,257.11 24 x 6 D3024-6 1 - 3,419.97 24 x 8 D1024-8 1 - 3,524.61 24 x 8 D3024-8 1 - 3,700.84 24 x 10 D1024-10 1 - 3,564.64 24 x 10 D3024-10 1 - 3,742.87 24 x 12 D1024-12 1 - 3,643.06 24 x 12 D3024-12 1 - 3,825.21 24 x 14 D1024-14 1 - 3,670.93 24 x 14 D3024-14 1 - 3,854.48 24 x 16 D1024-16 1 - 3,677.79 24 x 16 D3024-16 1 - 3,861.68 24 x 18 D1024-18 1 - 5,064.35 24 x 18 D3024-18 1 - 5,317.57 24 x 20 D1024-20 1 - 5,773.40 24 x 20 D3024-20 1 - 6,062.07 24 x 24 D1024 1 - 6,224.66 24 x 24 D3024 1 - 6,535.89
Test Tee with Countersunk Plug HxHxFIPT Test Tee with Raised Plug HxHxFIPT *4 x 4 D12804 8 - 42.70 *4 x 4 D12904 7 - 43.36 *6 x 4 D12806-4 1 12 146.50 *6 x 4 D12906-4 1 12 144.42 *6 x 6 D12806 1 15 214.66 *6 x 6 D12906 1 24 206.37 8 x 4 D12808-4 4 - 162.67 8 x 4 D12908-4 1 17 160.59 *8 x 6 D12808-6 1 13 244.24 *8 x 6 D12908-6 1 26 235.93 *8 x 8 D12808 1 10 540.75 *8 x 8 D12908 1 10 540.79 *10 x 4 D12810-4 1 12 421.62 *10 x 4 D12910-4 1 12 421.77 *10 x 6 D12810-6 1 9 572.38 *10 x 6 D12910-6 1 9 572.34 *10 x 8 D12810-8 1 8 891.19 *10 x 8 D12910-8 1 8 891.24 *10 x 10 D12810 1 11 909.18 *10 x 10 D12910 1 11 909.18 *12 x 4 D12812-4 1 8 545.38 *12 x 4 D12912-4 1 8 545.54 *12 x 6 D12812-6 1 7 700.63 *12 x 6 D12912-6 1 7 700.52 *12 x 8 D12812-8 1 6 976.40 *12 x 8 D12912-8 1 6 976.45 *12 x 10 D12812-10 1 8 1,021.82 *12 x 10 D12912-10 1 8 1,021.82 *12 x 12 D12812 1 7 1,079.63 *12 x 12 D12912 1 7 1,079.63 14 x 4 D12814-4 1 - 971.89 14 x 4 D12914-4 1 - 970.20 14 x 6 D12814-6 1 - 1,182.31 14 x 6 D12914-6 1 - 1,176.27 14 x 8 D12814-8 1 - 1,547.95 14 x 8 D12914-8 1 - 1,533.86 16 x 4 D12816-4 1 - 1,079.52 16 x 4 D12916-4 1 - 1,077.83 16 x 6 D12816-6 1 - 1,313.56 16 x 6 D12916-6 1 - 1,307.52
16 x 8 D12816-8 1 - 1,686.83 16 x 8 D12916-8 1 - 1,672.74 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D1 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Solvent Weld DWV Fittings D
Page D3* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
www.StanRoberts.com Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Test Tee without Plug HxHxFIPT Sanitary Tee (T-Y) HxHxH *4 x 4 D1104 8 - 48.03 *4 x 4 D156 6 - 46.72 *6 x 4 D1106-4 3 - 124.80 *6 x 4 D157-4 5 - 136.91 *6 x 6 D1106 4 25 137.34 *6 x 6 D157 2 - 141.58 8 x 4 D1108-4 3 - 134.14 *8 x 4 D158-4 2 - 250.01 *8 x 6 D1108-6 2 26 173.32 *8 x 6 D158-6 2 - 308.67 *8 x 8 D1108 2 - 443.36 *8 x 8 D158 2 - 388.92 *10 x 4 D11010-4 1 12 413.57 10 x 4 D1510-4 1 - 397.90 *10 x 6 D11010-6 1 11 542.43 10 x 6 D1510-6 1 - 486.96 *10 x 8 D11010-8 1 11 737.79 10 x 8 D1510-8 1 - 657.26 *10 x 10 D11010 1 11 749.42 10 x 10 D1510 1 - 895.64 *12 x 4 D11012-4 1 8 537.31 12 x 4 D1512-4 1 - 505.54 *12 x 6 D11012-6 1 8 670.65 12 x 6 D1512-6 1 - 525.18 *12 x 8 D11012-8 1 8 827.77 12 x 8 D1512-8 1 - 728.96 *12 x 10 D11012-10 1 8 833.74 12 x 10 D1512-10 1 - 815.72 *12 x 12 D11012 1 7 742.70 12 x 12 D1512 1 - 972.15 14 x 4 D11014-4 1 - 955.66 14 x 4 D1514-4 1 - 873.14 14 x 6 D11014-6 1 - 1,145.39 14 x 6 D1514-6 1 - 1,100.62 14 x 8 D11014-8 1 - 1,432.53 14 x 8 D1514-8 1 - 1,239.55 16 x 4 D11016-4 1 - 1,063.29 14 x 10 D1514-10 1 - 1,338.76 16 x 6 D11016-6 1 - 1,276.64 14 x 12 D1514-12 1 - 1,754.94 16 x 8 D11016-8 1 - 1,571.41 14 x 14 D1514 1 - 1,938.38 Tee Cross HxHxHxH 16 x 4 D1516-4 1 - 1,116.04 4 x 4 D1794 1 - 75.34 16 x 6 D1516-6 1 - 1,181.25 6 x 4 D1796-4 1 - 149.76 16 x 8 D1516-8 1 - 1,437.05 6 x 6 D1796 1 - 169.22 16 x 10 D1516-10 1 - 1,674.16 8 x 4 D1798-4 1 - 191.77 16 x 12 D1516-12 1 - 1,730.51 8 x 6 D1798-6 1 - 220.67 16 x 14 D1516-14 1 - 1,854.90 8 x 8 D1798 1 - 290.21 16 x 16 D1516 1 - 1,999.90 10 x 4 D17910-4 1 - 390.84 18 x 4 D1518-4 1 - 1,453.19 10 x 6 D17910-6 1 - 427.53 18 x 6 D1518-6 1 - 1,532.15 10 x 8 D17910-8 1 - 558.62 18 x 8 D1518-8 1 - 1,611.15 10 x 10 D17910 1 - 665.09 20 x 4 D1520-4 1 - 1,743.85 12 x 4 D17912-4 1 - 453.03 20 x 6 D1520-6 1 - 1,838.57 12 x 6 D17912-6 1 - 536.44 20 x 8 D1520-8 1 - 1,933.37 12 x 8 D17912-8 1 - 635.49 24 x 4 D1524-4 1 - 3,191.00 12 x 10 D17912-10 1 - 784.43 24 x 6 D1524-6 1 - 3,375.54 12 x 12 D17912 1 - 996.14 24 x 8 D1524-8 1 - 3,965.19 14 x 4 D17914-4 1 - 1,072.05 14 x 6 D17914-6 1 - 1,215.21 Combo Wye & 1/8 Bend HxHxH (2 Piece) 14 x 8 D17914-8 1 - 1,354.87 †4 x 4 D1654 4 - 81.14 14 x 10 D17914-10 1 - 1,574.79 †6 x 4 D1656-4 1 20 234.77 14 x 12 D17914-12 1 - 1,942.88 †6 x 6 D1656 1 16 252.51 14 x 14 D17914 1 - 2,195.98 †8 x 4 D1658-4 1 14 212.07 16 x 4 D17916-4 1 - 1,282.88 †8 x 6 D1658-6 1 10 307.61 16 x 6 D17916-6 1 - 1,468.58 †8 x 8 D1658 1 10 404.26 16 x 8 D17916-8 1 - 1,750.41 †10 x 4 D16510-4 1 10 357.49 16 x 10 D17916-10 1 - 1,997.04 †10 x 6 D16510-6 1 8 459.54 16 x 12 D17916-12 1 - 2,119.07 †10 x 8 D16510-8 1 8 599.29 16 x 14 D17916-14 1 - 2,358.50 †10 x 10 D16510 1 6 1,017.61 16 x 16 D17916 1 - 2,639.18 †12 x 4 D16512-4 1 8 555.97 18 x 4 D17918-4 1 - 1,721.51 †12 x 6 D16512-6 1 6 577.52 18 x 6 D17918-6 1 - 1,907.84 †12 x 8 D16512-8 1 6 728.37 18 x 8 D17918-8 1 - 2,065.54 †12 x 10 D16512-10 1 4 1,043.38 18 x 10 D17918-10 1 - 2,213.42 †12 x 12 D16512 1 3 1,199.92 18 x 12 D17918-12 1 - 2,305.11 14 x 4 D16514-4 1 11 950.79 18 x 14 D17918-14 1 - 2,454.14 14 x 6 D16514-6 1 9 1,092.08 18 x 16 D17918-16 1 - 2,632.05 14 x 8 D16514-8 1 6 1,213.23 18 x 18 D17918 1 - 3,466.25 14 x 10 D16514-10 1 4 1,415.27 20 x 4 D17920-4 1 - 2,065.99 14 x 12 D16514-12 1 3 1,793.25 20 x 6 D17920-6 1 - 2,289.88 14 x 14 D16514 1 3 2,233.55 20 x 8 D17920-8 1 - 2,473.58 16 x 4 D16516-4 1 5 1,238.27 20 x 10 D17920-10 1 - 2,664.20 16 x 6 D16516-6 1 5 1,267.80 20 x 12 D17920-12 1 - 2,774.69 16 x 8 D16516-8 1 4 1,385.20 20 x 14 D17920-14 1 - 2,953.92 16 x 10 D16516-10 1 3 1,717.78 20 x 16 D17920-16 1 - 3,158.17 16 x 12 D16516-12 1 3 1,907.62 20 x 18 D17920-18 1 - 4,159.46 16 x 14 D16516-14 1 - 2,334.68 20 x 20 D17920 1 - 4,430.81 16 x 16 D16516 1 - 2,552.58 24 x 4 D17924-4 1 - 3,759.13 18 x 4 D16518-4 1 - 1,598.09 24 x 6 D17924-6 1 - 4,559.95 18 x 6 D16518-6 1 - 1,684.95 24 x 8 D17924-8 1 - 5,110.69 18 x 8 D16518-8 1 - 1,771.72 24 x 10 D17924-10 1 - 5,346.96 20 x 4 D16520-4 1 - 1,917.66 24 x 12 D17924-12 1 - 5,646.74 20 x 6 D16520-6 1 - 2,021.87 24 x 14 D17924-14 1 - 5,873.49 20 x 8 D16520-8 1 - 2,126.12 24 x 16 D17924-16 1 - 6,068.35 24 x 4 D16524-4 1 - 3,509.20 24 x 18 D17924-18 1 - 8,609.40 24 x 6 D16524-6 1 - 3,712.10 24 x 20 D17924-20 1 - 10,103.45 24 x 8 D16524-8 1 - 3,835.97 24 x 24 D17924 1 - 11,204.39
*Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D2 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Page D4* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Double Sanitary Tee (T-Y) HxHxHxH Double 45 Degree Wye HxHxHxH 4 x 4 D1534 1 - 157.99 4 x 4 D364-4 1 - 108.61 6 x 4 D1536-4 1 - 238.34 *6 x 4 D366-4 2 - 185.73 6 x 6 D1536 1 - 404.10 *6 x 6 D366-6 2 - 189.76 8 x 4 D1538-4 1 - 244.95 8 x 4 D368-4 1 - 195.57 8 x 6 D1538-6 1 - 468.67 8 x 6 D368-6 1 - 257.09 8 x 8 D1538 1 - 691.42 8 x 8 D368-8 1 - 330.04 10 x 4 D15310-4 1 - 417.54 10 x 4 D3610-4 1 - 368.16 10 x 6 D15310-6 1 - 706.83 10 x 6 D3610-6 1 - 495.25 10 x 8 D15310-8 1 - 968.35 10 x 8 D3610-8 1 - 606.97 10 x 10 D15312-4 1 - 1,279.60 10 x 10 D3610 1 - 718.14 12 x 4 D15312-4 1 - 619.59 12 x 4 D3612-4 1 - 570.21 12 x 6 D15312-6 1 - 857.20 12 x 6 D3612-6 1 - 645.62 12 x 8 D15312-8 1 - 1,155.52 12 x 8 D3612-8 1 - 794.14 12 x 10 D15312-10 1 - 1,489.27 12 x 10 D3612-10 1 - 927.81 12 x 12 D15312 1 - 2,049.87 12 x 12 D3612 1 - 1,205.47 14 x 4 D15314-4 1 - 1,269.34 14 x 4 D3614-4 1 - 1,219.96 14 x 6 D15314-6 1 - 1,592.39 14 x 6 D3614-6 1 - 1,380.81 14 x 8 D15314-8 1 - 1,858.56 14 x 8 D3614-8 1 - 1,497.18 14 x 10 D15314-10 1 - 2,263.27 14 x 10 D3614-10 1 - 1,701.81 14 x 12 D15314-12 1 - 2,969.53 14 x 12 D3614-12 1 - 2,125.13 14 x 14 D15314 1 - 3,874.68 14 x 14 D3614 1 - 2,385.70 16 x 4 D15316-4 1 - 1,474.79 16 x 4 D3616-4 1 - 1,425.41 16 x 6 D15316-6 1 - 1,838.39 16 x 6 D3616-6 1 - 1,626.81 16 x 8 D15316-8 1 - 2,147.74 16 x 8 D3616-8 1 - 1,786.36 16 x 10 D15316-10 1 - 2,717.04 16 x 10 D3616-10 1 - 2,155.58 16 x 12 D15316-12 1 - 3,146.80 16 x 12 D3616-12 1 - 2,302.40 16 x 14 D15316-14 1 - 4,036.48 16 x 14 D3616-14 1 - 2,547.50 16 x 16 D15316 1 - 4,471.33 16 x 16 D3616 1 - 2,832.47 18 x 4 D15318-4 1 - 1,928.85 18 x 4 D3618-4 1 - 1,879.57 18 x 6 D15318-6 1 - 2,242.77 18 x 6 D3618-6 1 - 2,031.19 18 x 8 D15318-8 1 - 2,539.35 18 x 8 D3618-8 1 - 2,188.63 18 x 10 D15318-10 1 - 3,001.06 18 x 10 D3618-10 1 - 2,439.59 18 x 12 D15318-12 1 - 3,455.81 18 x 12 D3618-12 1 - 2,611.41 18 x 14 D15318-14 1 - 4,278.32 18 x 14 D3618-14 1 - 2,789.34 18 x 16 D15318-16 1 - 4,769.34 18 x 16 D3618-16 1 - 3,127.48 18 x 18 D15318 1 - 5,840.76 18 x 18 D3618 1 - 3,639.56 20 x 4 D15320-4 1 - 2,632.21 20 x 4 D3620-4 1 - 2,254.50 20 x 6 D15320-6 1 - 2,649.04 20 x 6 D3620-6 1 - 2,437.46 20 x 8 D15320-8 1 - 2,987.72 20 x 8 D3620-8 1 - 2,626.34 20 x 10 D15320-10 1 - 3,488.77 20 x 10 D3620-10 1 - 2,927.31 20 x 12 D15320-12 1 - 3,978.19 20 x 12 D3620-12 1 - 3,133.79 20 x 14 D15320-14 1 - 4,955.70 20 x 14 D3620-14 1 - 3,466.72 20 x 16 D15320-16 1 - 5,394.85 20 x 16 D3620-16 1 - 3,752.99 20 x 18 D15320-18 1 - 6,282.76 20 x 18 D3620-18 1 - 4,081.56 20 x 20 D15320 1 - 7,727.69 20 x 20 D3620 1 - 4,330.53 24 x 4 D15324-4 1 - 2,910.13 24 x 4 D3624-4 1 - 3,755.61 24 x 6 D15324-6 1 - 4,771.53 24 x 6 D3624-6 1 - 4,559.95 24 x 8 D15324-8 1 - 5,472.07 24 x 8 D3624-8 1 - 5,110.69 24 x 10 D15324-10 1 - 5,908.42 24 x 10 D3624-10 1 - 5,346.96 24 x 12 D15324-12 1 - 6,491.14 24 x 12 D3624-12 1 - 5,646.74 24 x 14 D15324-14 1 - 7,362.47 24 x 14 D3624-14 1 - 5,873.49 24 x 16 D15324-16 1 - 7,709.74 24 x 16 D3624-16 1 - 6,067.88 24 x 18 D15324-18 1 - 11,073.14 24 x 18 D3624-18 1 - 8,871.94 24 x 20 D15324-20 1 - 13,438.94 24 x 20 D3624-20 1 - 10,044.28 24 x 24 D15324 1 - 16,632.40 24 x 24 D3624 1 - 11,764.60 Long Radius Sanitary Tee HxHxH 2-Way Cleanout HxHxH *4 x 4 D1644 4 - 55.07 *4 x 4 D1004 6 - 57.50 *6 x 6 D1006 3 - 480.42 1/4 Bend (90) Vent HxH 1/4 Bend (90) Vent SxH *4 D204 8 - 34.91 *4 D224 1 - 36.66 *6 D206 4 - 151.73 *6 D226 1 - 159.32 *8 D208 2 - 158.16 *8 D228 2 - 166.07 *10 D2010 1 9 316.45 *10 D2210 1 9 348.89 *12 D2012 1 6 487.31 *12 D2212 1 6 518.29 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D3 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Solvent Weld DWV Fittings D
Page D5* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
www.StanRoberts.com Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
1/4 Bend (90) HxH Long Sweep 1/4 Bend (90) SxH Long Sweep *4 D256 10 - 24.98 *4 D274 10 - 26.39 *6 D257 4 - 87.72 *6 D277 4 - 122.16 *8 D258 2 - 177.61 *8 D278 2 - 243.35 †10 D2510 1 8 546.23 †10 D2710 1 8 546.46 †12 D2512 1 6 824.07 †12 D2712 1 6 829.40 14 D2514 1 - 865.27 14 D2714 1 - 845.75 16 D2516 1 - 1,184.25 16 D2716 1 - 1,170.14 18 D2518 1 - 1,465.79 18 D2718 1 - 1,452.11 20 D2520 1 - 2,129.42 20 D2720 1 - 2,129.42 24 D2524 1 - 2,949.09 24 D2724 1 - 2,949.09 1/6 Bend (60) HxH 1/6 Bend (60) SxH 4 D1354.60 1 - 55.22 4 D1344.60 1 - 56.60 6 D1356.60 1 - 111.02 6 D1346.60 1 - 113.80 8 D1358.60 1 - 184.03 8 D1348.60 1 - 188.63 10 D13510.60 1 - 381.62 10 D13410.60 1 - 391.16 12 D13512.60 1 - 518.39 12 D13412.60 1 - 531.35 14 D13514.60 1 - 774.40 14 D13414.60 1 - 793.76 16 D13516.60 1 - 952.19 16 D13416.60 1 - 976.00 18 D13518.60 1 - 1,759.85 18 D13418.60 1 - 1,803.85 20 D13520.60 1 - 2,507.86 20 D13420.60 1 - 2,570.76 24 D13524.60 1 - 3,134.36 24 D13424.60 1 - 3,212.72 1/8 Bend (45) HxH 1/8 Bend (45) SxH *4 D504 8 - 19.85 *4 D404 8 - 17.19 *6 D506 5 - 80.25 *6 D406 5 - 98.29 *8 D508 2 - 159.50 *8 D408 2 - 173.19 *10 D5010 1 12 265.50 *10 D4010 1 12 265.73 *12 D5012 1 8 401.87 *12 D4012 1 8 407.20 14 D5014 1 - 745.17 14 D4014 1 - 727.49 16 D5016 1 - 805.93 16 D4016 1 - 805.93 18 D5018 1 - 1,097.57 18 D4018 1 - 1,085.60 20 D5020 1 - 1,683.58 20 D4020 1 - 1,683.58 24 D5024 1 - 2,418.90 24 D4024 1 - 2,418.90 1/12 Bend (30) HxH 1/12 Bend (30) SxH 4 D1354.30 1 - 54.40 4 D1344.30 1 - 55.76 6 D1356.30 1 - 109.38 6 D1346.30 1 - 112.12 8 D1358.30 1 - 181.31 8 D1348.30 1 - 185.84 10 D13510.30 1 - 375.98 10 D13410.30 1 - 385.38 12 D13512.30 1 - 510.73 12 D13412.30 1 - 523.51 14 D13514.30 1 - 671.17 14 D13414.30 1 - 767.70 16 D13516.30 1 - 830.29 16 D13416.30 1 - 851.06 18 D13518.30 1 - 990.82 18 D13418.30 1 - 1,015.60 20 D13520.30 1 - 1,791.92 20 D13420.30 1 - 1,836.72 24 D13524.30 1 - 2,580.08 24 D13424.30 1 - 2,644.58 1/16 Bend (22.5) HxH 1/16 Bend (22.5) SxH *4 D1704 8 - 18.26 *4 D1714 8 - 26.08 *6 D1706 6 - 106.17 *6 D1716 6 - 106.12 *8 D1708 3 - 165.50 *8 D1718 3 - 185.38 *10 D17010 1 24 254.39 *10 D17110 1 24 275.79 *12 D17012 1 8 407.03 *12 D17112 1 8 380.67 14 D17014 1 - 651.48 14 D17114 1 - 745.17 16 D17016 1 - 805.93 16 D17116 1 - 805.93 18 D17018 1 - 961.75 18 D17118 1 - 961.75 20 D17020 1 - 1,739.35 20 D17120 1 - 1,739.35 24 D17024 1 - 2,504.38 24 D17124 1 - 2,504.38 1/32 Bend (11.25) HxH 1/32 Bend (11.25) SxH 4 D1934 1 - 53.60 4 D1834 1 - 54.94 6 D1936 1 - 107.76 6 D1836 1 - 110.45 8 D1938 1 - 178.63 8 D1838 1 - 188.16 10 D19310 1 - 370.44 10 D18310 1 - 379.70 12 D19312 1 - 503.18 12 D18312 1 - 515.76 14 D19314 1 - 661.25 14 D18314 1 - 756.35 16 D19316 1 - 818.02 16 D18316 1 - 838.48 18 D19318 1 - 976.18 18 D18318 1 - 1,000.59 20 D19320 1 - 1,765.44 20 D18320 1 - 1,809.58 24 D19324 1 - 2,541.95 24 D18324 1 - 2,605.50 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D4 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Page D6* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Cap (H) Spigot Plug (S) *4 D1604 27 - 22.38 *4 T1164 4 - 32.64 *6 D1606 8 - 56.44 *6 T1166 6 - 102.35 *8 D1608 6 - 95.57 *8 T1168 1 - 116.02 *10 D16010 2 - 170.43 *10 D11610 2 36 169.27 *12 D16012 2 - 215.60 *12 D11612 2 27 212.23 14 D16014 1 - 359.73 14 D11614 1 - 409.52 16 D16016 1 - 460.51 16 D11616 1 - 513.74 18 D16018 1 - 532.61 18 D11618 1 - 592.09 20 D16020 1 - 1,168.79 20 D11620 1 - 958.84 24 D16024 1 - 1,334.03 24 D11624 1 - 1,441.76 Drain Grate (S) Male Adapter HxMPT *4 D911 25 - 21.90 *4 x 4 D1304 4 - 21.70 *6 D916 10 - 47.40 *6 x 6 D1306 8 - 140.59 Stop Coupling HxH Repair Coupling HxH *4 D604 12 - 10.79 *4 D624 12 - 25.03 *6 D606 10 - 35.14 *6 D626 10 - 51.12 *8 D608 3 - 66.91 *8 D628 3 - 83.64 *10 D6010 2 24 116.78 *10 D6210 2 24 145.98 *12 D6012 1 18 198.90 *12 D6212 1 18 248.63 14 D6014 1 - 306.62 14 D6214 1 - 383.28 16 D6016 1 - 342.01 16 D6216 1 - 427.51 18 D6018 1 - 560.75 18 D6218 1 - 700.94 20 D6020 1 - 842.41 20 D6220 1 - 1,053.01 24 D6024 1 - 947.76 24 D6224 1 - 1,184.70 Concentric Reducer Coupling HxH Concentric Reducer Bushing SxH *6 x 4 D606-4 8 - 66.75 *6 x 4 D1216 10 - 63.57 *8 x 4 D608-4 5 - 115.76 *8 x 4 D1217 5 - 109.68 *8 x 6 D608-6 6 - 125.08 *8 x 6 D1218 4 - 119.12 *10 x 4 D6010-4 2 - 187.35 *10 x 4 D1210-4 2 - 178.45 *10 x 6 D6010-6 2 - 193.27 *10 x 6 D1210-6 2 - 184.07 *10 x 8 D6010-8 2 - 199.18 *10 x 8 D1210-8 2 - 189.69 *12 x 4 D6012-4 2 - 283.85 *12 x 4 D1212-4 2 - 270.33 *12 x 6 D6012-6 2 - 331.91 *12 x 6 D1212-6 2 - 316.11 *12 x 8 D6012-8 2 - 348.51 *12 x 8 D1212-8 2 - 331.91 *12 x 10 D6012-10 2 - 365.93 *12 x 10 D1212-10 2 - 348.51 14 x 4 D6014-4 1 - 428.51 14 x 4 D1214-4 1 - 408.10 14 x 6 D6014-6 1 - 433.67 14 x 6 D1214-6 1 - 413.02 14 x 8 D6014-8 1 - 489.47 14 x 8 D1214-8 1 - 466.16 14 x 10 D6014-10 1 - 618.69 14 x 10 D1214-10 1 - 589.23 14 x 12 D6014-12 1 - 649.63 14 x 12 D1214-12 1 - 618.70 16 x 4 D6016-4 1 - 511.09 16 x 4 D1216-4 1 - 486.75 16 x 6 D6016-6 1 - 526.28 16 x 6 D1216-6 1 - 501.22 16 x 8 D6016-8 1 - 607.28 16 x 8 D1216-8 1 - 578.36 16 x 10 D6016-10 1 - 682.01 16 x 10 D1216-10 1 - 649.53 16 x 12 D6016-12 1 - 689.40 16 x 12 D1216-12 1 - 656.57 16 x 14 D6016-14 1 - 715.10 16 x 14 D1216-14 1 - 681.05 18 x 4 D6018-4 1 - 871.68 18 x 4 D1218-4 1 - 830.17 18 x 6 D6018-6 1 - 918.45 18 x 6 D1218-6 1 - 874.71 18 x 8 D6018-8 1 - 989.22 18 x 8 D1218-8 1 - 942.11 18 x 10 D6018-10 1 - 1,058.85 18 x 10 D1218-10 1 - 1,008.43 18 x 12 D6018-12 1 - 1,076.37 18 x 12 D1218-12 1 - 1,025.11 18 x 14 D6018-14 1 - 1,170.07 18 x 14 D1218-14 1 - 1,114.35 18 x 16 D6018-16 1 - 1,228.57 18 x 16 D1218-16 1 - 1,170.07 20 x 4 D6020-4 1 - 1,046.10 20 x 4 D1220-4 1 - 996.29 20 x 6 D6020-6 1 - 1,102.09 20 x 6 D1220-6 1 - 1,049.61 20 x 8 D6020-8 1 - 1,131.97 20 x 8 D1220-8 1 - 1,078.07 20 x 10 D6020-10 1 - 1,158.31 20 x 10 D1220-10 1 - 1,103.15 20 x 12 D6020-12 1 - 1,174.09 20 x 12 D1220-12 1 - 1,118.18 20 x 14 D6020-14 1 - 1,249.41 20 x 14 D1220-14 1 - 1,189.91 20 x 16 D6020-16 1 - 1,265.98 20 x 16 D1220-16 1 - 1,205.69 20 x 18 D6020-18 1 - 1,352.09 20 x 18 D1220-18 1 - 1,287.70 24 x 4 D6024-4 1 - 1,911.75 24 x 4 D1224-4 1 - 1,820.71 24 x 6 D6024-6 1 - 1,924.30 24 x 6 D1224-6 1 - 1,832.67 24 x 8 D6024-8 1 - 1,946.19 24 x 8 D1224-8 1 - 1,853.51 24 x 10 D6024-10 1 - 1,974.44 24 x 10 D1224-10 1 - 1,880.42 24 x 12 D6024-12 1 - 2,005.86 24 x 12 D1224-12 1 - 1,910.34 24 x 14 D6024-14 1 - 2,074.72 24 x 14 D1224-14 1 - 1,975.92 24 x 16 D6024-16 1 - 2,106.04 24 x 16 D1224-16 1 - 2,005.75 24 x 18 D6024-18 1 - 2,178.19 24 x 18 D1224-18 1 - 2,074.47 24 x 20 D6024-20 1 - 2,547.84 24 x 20 D1224-20 1 - 2,426.51 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D5 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Solvent Weld DWV Fittings D
Page D7* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
www.StanRoberts.com Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Eccentric Reducer Coupling HxH Eccentric Reducer Bushing SxH 6 x 4 D6106-4 1 - 70.42 6 x 4 D1306-4 1 - 74.98 8 x 4 D6108-4 1 - 121.49 8 x 4 D1308-4 1 - 129.74 8 x 6 D6108-6 1 - 131.96 8 x 6 D1308-6 1 - 132.86 10 x 4 D6110-4 1 - 197.65 10 x 4 D13010-4 1 - 188.26 10 x 6 D6110-6 1 - 298.45 10 x 6 D13010-6 1 - 234.65 10 x 8 D6110-8 1 - 210.13 10 x 8 D13010-8 1 - 260.10 12 x 4 D6112-4 1 - 299.46 12 x 4 D13012-4 1 - 285.20 12 x 6 D6112-6 1 - 350.17 12 x 6 D13012-6 1 - 349.08 12 x 8 D6112-8 1 - 367.68 12 x 8 D13012-8 1 - 359.20 12 x 10 D6112-10 1 - 386.06 12 x 10 D13012-10 1 - 367.68 14 x 4 D6114-4 1 - 452.08 14 x 4 D13014-4 1 - 430.55 14 x 6 D6114-6 1 - 457.52 14 x 6 D13014-6 1 - 435.74 14 x 8 D6114-8 1 - 516.39 14 x 8 D13014-8 1 - 491.80 14 x 10 D6114-10 1 - 652.72 14 x 10 D13014-10 1 - 621.64 14 x 12 D6114-12 1 - 685.36 14 x 12 D13014-12 1 - 652.73 16 x 4 D6116-4 1 - 539.20 16 x 4 D13016-4 1 - 513.52 16 x 6 D6116-6 1 - 555.23 16 x 6 D13016-6 1 - 528.79 16 x 8 D6116-8 1 - 640.68 16 x 8 D13016-8 1 - 610.17 16 x 10 D6116-10 1 - 719.52 16 x 10 D13016-10 1 - 685.25 16 x 12 D6116-12 1 - 727.32 16 x 12 D13016-12 1 - 692.68 16 x 14 D6116-14 1 - 754.43 16 x 14 D13016-14 1 - 718.51 18 x 4 D6118-4 1 - 919.62 18 x 4 D13018-4 1 - 875.83 18 x 6 D6118-6 1 - 968.96 18 x 6 D13018-6 1 - 922.82 18 x 8 D6118-8 1 - 1,043.63 18 x 8 D13018-8 1 - 993.93 18 x 10 D6118-10 1 - 1,117.09 18 x 10 D13018-10 1 - 1,063.89 18 x 12 D6118-12 1 - 1,135.57 18 x 12 D13018-12 1 - 1,081.49 18 x 14 D6118-14 1 - 1,234.42 18 x 14 D13018-14 1 - 1,175.64 18 x 16 D6118-16 1 - 1,296.14 18 x 16 D13018-16 1 - 1,234.42 20 x 4 D6120-4 1 - 1,103.64 20 x 4 D13020-4 1 - 1,051.09 20 x 6 D6120-6 1 - 1,162.70 20 x 6 D13020-6 1 - 1,107.34 20 x 8 D6120-8 1 - 1,194.23 20 x 8 D13020-8 1 - 1,137.36 20 x 10 D6120-10 1 - 1,222.02 20 x 10 D13020-10 1 - 1,163.82 20 x 12 D6120-12 1 - 1,238.66 20 x 12 D13020-12 1 - 1,179.68 20 x 14 D6120-14 1 - 1,318.13 20 x 14 D13020-14 1 - 1,255.36 20 x 16 D6120-16 1 - 1,335.61 20 x 16 D13020-16 1 - 1,272.00 20 x 18 D6120-18 1 - 1,426.45 20 x 18 D13020-18 1 - 1,358.52 24 x 4 D6124-4 1 - 2,016.90 24 x 4 D13024-4 1 - 1,920.85 24 x 6 D6124-6 1 - 2,030.14 24 x 6 D13024-6 1 - 1,933.47 24 x 8 D6124-8 1 - 2,053.23 24 x 8 D13024-8 1 - 1,955.45 24 x 10 D6124-10 1 - 2,083.03 24 x 10 D13024-10 1 - 1,983.84 24 x 12 D6124-12 1 - 2,116.18 24 x 12 D13024-12 1 - 2,015.41 24 x 14 D6124-14 1 - 2,188.83 24 x 14 D13024-14 1 - 2,084.60 24 x 16 D6124-16 1 - 2,221.87 24 x 16 D13024-16 1 - 2,116.07 24 x 18 D6124-18 1 - 2,297.99 24 x 18 D13024-18 1 - 2,188.57 24 x 20 D6124-20 1 - 2,687.97 24 x 20 D13024-20 1 - 2,559.97 Expansion Joint Coupling HxH Flush Reducer Bushing SxH 2 x 2 D632 10 - 99.77 10 x 4 D12510-4 1 - 263.88 3 x 3 D633 9 - 122.94 10 x 6 D12510-6 1 - 271.13 4 x 4 D634 5 - 255.36 10 x 8 D12510-8 2 - 285.32 6 x 6 D636 1 - 539.20 12 x 4 D12512-4 1 - 372.98 Supplied in Grey PVC 12 x 6 D12512-6 1 - 382.31 12 x 8 D12512-8 1 - 391.87 12 x 10 D12512-10 1 - 401.67 DWV Adapter Coupling HxH (SDR35) DWV Adapter Bushing SxH (SDR35) Solvent Sewer Hub x Solvent DWV Hub Solvent (Short) Sewer Spigot x Solvent DWV Hub *4 x 3 P655 45 - 7.26 *3 x 1! P1202 15 - 15.13 *4 x 4 P657 15 - 10.47 *3 x 2 P1203 15 - 13.65 *6 x 4 P658 10 - 28.15 *4 x 1! P1204 8 - 14.05 *6 x 6 P659 12 - 35.91 *4 x 2 P1205 8 - 14.25 †8 x 8 P6508 1 - 109.64 *4 x 3 P1211 15 - 31.13 10 x 8 P6510-8 1 - 251.44 *4 x 4 P1213 20 - 19.94 10 x 10 P6510 2 - 267.29 *6 x 4 P1214 15 - 34.41 12 x12 P6512 1 - 393.48 *6 x 6 P1215 12 - 45.52 Gasketed DWV Adapter Coupling GxDWV G Gasketed DWV Adapter Bushing SxDWV G SDR26 Gasket Sewer Hub x Gasket DWV Hub SDR26 Chamfer Sewer Spigot x Gasket DWV Hub *4 x 4 H657 6 - 55.11 *4 x 4 H1213 6 - 51.04 *6 x 4 H658 4 - 73.93 *6 x 4 H1214 5 - 69.82 *6 x 6 H659 3 - 80.90 *6 x 6 H1215 4 - 76.76 8 x 8 H6508 1 - 193.14 8 x 8 H9208 1 - 188.31 10 x 10 H6510 1 - 267.29 10 x 10 H9210 1 - 260.62 12 x 12 H6512 1 - 393.49 12 x 12 H9212 1 - 383.65 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D6 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Page D8* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Gasketed DWV Adapter Coupling HxDWV G Gasketed DWV Adapter Bushing SxDWV G SDR26 Solvent Sewer Hub x Gasket DWV Hub SDR26 Solvent Sewer Spigot x Gasket DWV Hub *4 x 4 H954 6 - 49.11 *4 x 4 H924 6 - 51.04 *6 x 4 H956-4 4 - 62.96 *6 x 4 H926-4 4 - 69.82 *6 x 6 H956 4 - 74.87 *6 x 6 H926 4 - 76.76 8 x 8 H958 1 - 180.19 8 x 8 H928 1 - 188.31 10 x 10 H9510 1 - 306.74 10 x 10 H92210 1 - 260.62 12 x 12 H9512 1 - 448.87 12 x 12 H92212 1 - 383.65
DWV Adapter Bushing SxH (SDR35) DWV Adapter Bushing SxH (SDR26) Chamfer (Long) Sewer Spigot x Solvent DWV Hub Chamfer (Long) Sewer Spigot x Solvent DWV Hub *4 x 4 G944 8 - 19.98 4 x 4 H944 1 - 37.09 *6 x 4 G946-4 5 - 45.52 6 x 4 H946-4 1 - 56.83 *6 x 6 G946 4 - 57.44 6 x 6 H946 1 - 59.82 *8 x 8 G948 4 - 125.13 8 x 8 H948 1 - 140.77 10 x 10 L9410 1 - 213.83 10 x 10 H9410 1 - 240.56 12 x 12 L9412 1 - 314.79 12 x 12 H9412 1 - 354.14
DWV Adapter Sleeve DWV SxG DWV Adapter Sleeve DWV SxG Solvent DWV Spigot x SDR35 Gasket Sewer Hub Solvent DWV Spigot x SDR26 Gasket Sewer Hub *4 x 4 G1208 16 - 38.12 *4 x 4 H1208 4 - 40.03 *6 x 6 G1209 8 - 65.17 *6 x 6 H1209 4 - 76.61 8 x 8 L12008 1 - 159.34 8 x 8 H12008 1 - 199.18 10 x 10 L12010 1 - 264.52 10 x 10 H12010 1 - 267.29 12 x 12 L12012 1 - 374.06 12 x 12 H12012 1 - 393.49
DWV Adapter Sleeve DWV SxH Gasketed DWV Hub Adapter SxG Solvent DWV Spigot x SDR35 Solvent Sewer Hub Solvent DWV Spigot x Gasket DWV Hub *4 x 4 P1208 36 - 7.83 *4 x 4 D904 6 - 34.67 *6 x 6 P1209 20 - 33.75 *6 x 6 D906 4 - 72.13 8 x 8 P12008 1 - 108.09 *8 x 8 D908 4 - 119.47 10 x 10 P12010 1 - 143.90 10 x 10 D9010 1 - 308.12 12 x 12 P12012 1 - 228.47 12 x 12 D9012 1 - 450.89
Temporary Plug Polyethylene (S) Vertical Riser Adapter SxS *4 x 4 G1184 36 - 7.26 *4 x 4 T984 6 - 57.94 *6 x 6 G1186 40 - 10.76 *6 x 6 T986 4 - 102.57 *8 x 8 G1188 8 - 25.54 *8 x 8 T988 4 - 224.81
In-Line Backwater Valve HxH Terminal Backwater Valve H *4 x 4 D0104 1 - 116.68 4 D0204 1 - 188.97 *6 x 4 D0106 1 - 281.85 6 D0206 1 - 208.36 8 x 8 D0108 1 - 1,461.37 8 D0208 1 - 657.62 10 x 10 D0110 1 - 1,873.93 10 D0210 1 - 843.27 12 x 12 D0112 1 - 1,971.33 12 D0212 1 - 887.10
IntelliCap with 3M Marker IntelliDisc with 3M Marker *4 P1614-SN 14 - 69.00 *4 P1624-SN 20 - 57.50 *6 P1616-SN 10 - 86.25 *6 P1626-SN 10 - 71.88
Fit-Rite Adjustable Closet Flange Locator for 3M Marker *4 D1864 1 - 27.05 - P1634 1 - POR
Downspout Adapter (H) Flushmount Downspout Adapter (H) Downspout x Solvent DWV Hub Flushmount Downspout x Solvent DWV Hub *2x3 x 4 D1904 35 - 13.69 *4x6 x 6 D1928 4 - 75.29 *3x4 x 3 D1905 65 - 19.68 *3x4 x 4 D1906 60 - 21.61 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D7 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Solvent Weld DWV Fittings D
Page D9* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
www.StanRoberts.com Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Threaded Plug - Raised Threaded Plug - Countersunk *4 D1154 36 - 7.04 *4 D1144 20 - 12.04 *6 D1156 20 - 23.38 *6 D1146 20 - 30.97 *8 D1158 9 - 93.83 *8 D1148 4 - 117.08 *10 D11510 2 - 159.77 *10 D11410 2 - 176.08 *12 D11512 2 - 238.79 *12 D11412 3 - 249.14 Female Adapter HxFIPT Fitting Cleanout SxFIPT *4 x 4 D1404 18 - 14.87 *4 x 4 D1504 18 - 19.11 *6 x 6 D1406 4 - 49.89 *6 x 6 D1506 5 - 51.19 *8 x 8 D1408 4 - 157.91 *8 x 8 D1508 4 - 178.07 *10 x 10 D14010 2 - 507.12 *10 x 10 D15010 2 - 473.12 *12 x 12 D14012 2 - 735.71 *12 x 12 D15012 2 - 687.29 Female Adapter with Countersunk Plug Fitting Cleanout with Countersunk Plug †4 x 4 D8404 10 - 31.51 †4 x 4 D8504 10 - 35.75 †6 x 6 D8406 4 - 109.80 †6 x 6 D8506 4 - 111.10 †8 x 8 D8408 4 - 292.58 †8 x 8 D8508 4 - 312.74 †10 x 10 D84010 2 - 749.88 †10 x 10 D85010 2 - 768.22 †12 x 12 D84012 2 - 1,082.25 †12 x 12 D85012 2 - 1,109.05 Female Adapter with Raised Plug Fitting Cleanout with Raised Plug †4 x 4 D9404 10 - 26.51 †4 x 4 D9504 10 - 30.75 †6 x 6 D9406 4 - 102.21 †6 x 6 D9506 4 - 103.51 †8 x 8 D9408 4 - 269.33 †8 x 8 D9508 4 - 289.49 †10 x 10 D94010 2 - 733.57 †10 x 10 D95010 2 - 751.91 †12 x 12 D94012 2 - 1,071.90 †12 x 12 D95012 2 - 1,098.70 Saddle Tee with SS Clamps Saddle Wye with SS Clamps Solvent Skirt x Solvent Inlet Solvent Skirt x Solvent Inlet 6 x 4 D2106-4 1 - 60.31 6 x 4 D2306-4 1 - 64.83 8 x 4 D2108-4 1 - 85.25 8 x 4 D2308-4 1 - 91.64 8 x 6 D2108-6 1 - 87.78 8 x 6 D2308-6 1 - 94.36 10 x 4 D2110-4 1 - 107.44 10 x 4 D2310-4 1 - 115.50 10 x 6 D2110-6 1 - 125.18 10 x 6 D2310-6 1 - 134.57 10 x 8 D2110-8 1 - 281.18 10 x 8 D2310-8 1 - 302.27 12 x 4 D2112-4 1 - 129.63 12 x 4 D2312-4 1 - 139.35 12 x 6 D2112-6 1 - 150.71 12 x 6 D2312-6 1 - 162.01 12 x 8 D2112-8 1 - 395.98 12 x 8 D2312-8 1 - 425.68 12 x 10 D2112-10 1 - 474.13 12 x 10 D2312-10 1 - 509.69 14 x 4 D2114-4 1 - 144.52 14 x 4 D2314-4 1 - 155.36 14 x 6 D2114-6 1 - 164.67 14 x 6 D2314-6 1 - 177.02 14 x 8 D2114-8 1 - 405.33 14 x 8 D2314-8 1 - 435.73 14 x 10 D2114-10 1 - 483.51 14 x 10 D2314-10 1 - 519.77 14 x 12 D2114-12 1 - 492.65 14 x 12 D2314-12 1 - 529.60 16 x 4 D2116-4 1 - 154.02 16 x 4 D2316-4 1 - 165.57 16 x 6 D2116-6 1 - 175.74 16 x 6 D2316-6 1 - 188.92 16 x 8 D2116-8 1 - 414.59 16 x 8 D2316-8 1 - 445.68 16 x 10 D2116-10 1 - 493.15 16 x 10 D2316-10 1 - 530.14 16 x 12 D2116-12 1 - 501.92 16 x 12 D2316-12 1 - 539.56 16 x 14 D2116-14 1 - 511.16 16 x 14 D2316-14 1 - 549.50 18 x 4 D2118-4 1 - 231.18 18 x 4 D2318-4 1 - 248.52 18 x 6 D2118-6 1 - 244.13 18 x 6 D2318-6 1 - 262.44 18 x 8 D2118-8 1 - 541.45 18 x 8 D2318-8 1 - 582.06 18 x 10 D2118-10 1 - 604.18 18 x 10 D2318-10 1 - 649.49 18 x 12 D2118-12 1 - 724.66 18 x 12 D2318-12 1 - 779.01 18 x 14 D2118-14 1 - 778.23 18 x 14 D2318-14 1 - 836.60 18 x 16 D2118-16 1 - 863.62 18 x 16 D2318-16 1 - 928.39 20 x 4 D2120-4 1 - 236.35 20 x 4 D2320-4 1 - 254.08 20 x 6 D2120-6 1 - 257.81 20 x 6 D2320-6 1 - 277.15 20 x 8 D2120-8 1 - 543.76 20 x 8 D2320-8 1 - 557.35 20 x 10 D2120-10 1 - 606.53 20 x 10 D2320-10 1 - 652.02 20 x 12 D2120-12 1 - 726.96 20 x 12 D2320-12 1 - 781.48 20 x 14 D2120-14 1 - 780.52 20 x 14 D2320-14 1 - 839.06 20 x 16 D2120-16 1 - 863.62 20 x 16 D2320-16 1 - 928.39 20 x 18 D2120-18 1 - 912.56 20 x 18 D2320-18 1 - 981.01 24 x 4 D2124-4 1 - 240.87 24 x 4 D2324-4 1 - 258.94 24 x 6 D2124-6 1 - 262.32 24 x 6 D2324-6 1 - 281.99 24 x 8 D2124-8 1 - 546.07 24 x 8 D2324-8 1 - 587.03 24 x 10 D2124-10 1 - 608.87 24 x 10 D2324-10 1 - 654.54 24 x 12 D2124-12 1 - 729.26 24 x 12 D2324-12 1 - 783.96 24 x 14 D2124-14 1 - 782.81 24 x 14 D2324-14 1 - 841.52 24 x 16 D2124-16 1 - 878.74 24 x 16 D2324-16 1 - 944.65 24 x 18 D2124-18 1 - 958.79 24 x 18 D2324-18 1 - 1,030.70 24 x 20 D2124-20 1 - 1,079.34 24 x 20 D2324-20 1 - 1,160.29 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC
Page D8 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Page D10* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request
• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable
Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Solvent Weld DWV Fittings D
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Item Size in Inches
Part Number
Box Qty
Crate Qty
List Price
Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye 4” Inlet G5004 6 - 13.70 4” Inlet G5054 6 - 15.30 6” Inlet G5006 4 - 17.95 6” Inlet G5056 4 - 20.55 Stainless Steel Clamp (QuickLock) U Bend (Two Piece) 6 P5128 1 - 13.95 †4 x 4 D1844 3 - 79.67 8 P5188 1 - 19.21 †6 x 6 D1866 3 - 222.88 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable
Page D9