PENSTOCKS KWT®Medium pressure penstock type: KSA-MD 100 …
2
Application Specifications KWT penstocks are available in various forms and are used in surface, sewer and process water systems. Materials Passage: Ø 100 mm to Ø 800 mm Operating pressure: 6-8 MwC on/off seating as standard Operation method: Manual or through actuator Operation point: KWT connection (“half moon”) Movement mechanism: Non-rising spindle Higher pressures and larger dimensions on request. PENSTOCKS Moving plate: HDPE with SS316L stiffeners Spindle: SS 316 Spindle block: POM Bearing ring: OLG Back plate: HDPE Seals: EPDM Mounting material: SS316 Other materials on request. Operation Circular, square, rectangular or ellipse openings available Virtually no maintenance. Easy to install. Circular models available from stock. Various mounting methods available, wall/pipe/flange mounted. Benefits KWT®Medium pressure penstock type: KSA-MD 100 t/m 800 The KSA-MD is a tried and tested penstock type, as it has been a long-standing product supplied by KWT. Next to the proven heavy duty penstock (KSA-HD) and the fully stainless steel medium duty KSA-MD-RVS, the KSA-MD continues to be a very popular product for the majority of applications. The penstock consists of a vertically sliding door that closes a round opening, moving within a stainless steel 316L frame with HDPE guides. The seal between the door and frame is achieved through an EPDM lip seal positioned in the moving plate that retains between 6 and 8 MwC of water pressure from both sides, depending on opening size. The penstock is supplied with a non-rising spindle as standard, however on request the penstock can also be supplied with a rising spindle. Although the wall mounted type is the most popular, we can also supply these with pipe and flange connections. ® www.kwtgroup.nl ® KWT Biddinghuizen KWT reserves the right to modify the design without prior notification
Transcript of PENSTOCKS KWT®Medium pressure penstock type: KSA-MD 100 …
Application
Specifications
KWT penstocks are available in various forms andare used in surface, sewer and process water systems.
Materials
Passage: Ø 100 mm to Ø 800 mm
Operating pressure: 6-8 MwC on/off seating as standard
Operation method: Manual or through actuator
Operation point: KWT connection (“half moon”)
Movement mechanism: Non-rising spindle
Higher pressures and larger dimensions on request.
PENSTOCKS
Moving plate: HDPE with SS316L stiffeners
Spindle: SS 316
Spindle block: POM
Bearing ring: OLG
Back plate: HDPE
Seals: EPDM
Mounting material: SS316
Other materials on request.
Operation
Circular, square, rectangular or ellipse openings available
Virtually no maintenance.
Easy to install.
Circular models available from stock.
Various mounting methods available, wall/pipe/flange mounted.
Benefits
KWT®Medium pressure penstock type: KSA-MD 100 t/m 800
The KSA-MD is a tried and tested penstock type, as it has been a long-standing product supplied by KWT. Next to the proven heavy duty penstock (KSA-HD) and the fully stainless steel medium duty KSA-MD-RVS, the KSA-MD continues to be a very popular product for the majority of applications.
The penstock consists of a vertically sliding door that closes a round opening, moving within a stainless steel 316L frame with HDPE guides. The seal between the door and frame is achieved through an EPDM lip seal positioned in the moving plate that retains between 6 and 8 MwC of water pressure from both sides, depending on opening size.
The penstock is supplied with a non-rising spindle as standard, however on request the penstock can also be supplied with a rising spindle. Although the wall mounted type is the most popular, we can also supply these with pipe and flange connections.
®
www.kwtgroup.nl ®KWT Biddinghuizen KWT reserves the right to modify the design without prior notification
Penstock, type KSA-MD 100-800Manufactured by: KWT WaterbeheersingMaterials: HDPE, SS316, EPDM and POMStandard culvert: Ø 100 mm to Ø 800 mm Operating pressure: 6-8 MwC on/off seating
The penstock is provided with a non-rising spindle as standard. It has an OLG spindle bearing. It has an HDPE back plate. It has an HDPE moving plate provided with RVS316L stiffening with a POM spindle block. The mounting material and the spindle are made of SS316. The seal between the moving and back plate consists of an EPDM lip seal.
Description for tenders
®KWT Biddinghuizen
KWT®Medium pressure penstock type: KSA-MD 100 t/m 800
KWT reserves the right to modify the design without prior notification
KgNm.ANW A1 A2 B E F G H
470
500
570
650
750
800
1050
1250
1450
1650
1850
120
132
145
170
195
220
270
320
370
420
470
350
368
425
480
555
580
780
930
1080
1230
1380
110
125
160
200
250
315
400
500
630
710
800
260
275
310
350
400
465
550
650
750
850
950
210
225
260
300
350
415
500
600
700
800
900
240
255
290
330
380
445
530
630
730
830
930
70
70
70
70
70
70
70
70
70
70
70
130
130
130
130
130
130
130
130
130
130
130
24
26
32
39
47
58
72
89
105
122
139
10
10
10
10
10
15
20
30
45
55
70
21
22
25
29
33
39
49
60
73
92
109
4
4
4
4
4
4
8
8
8
10
10
8
8
8
8
8
8
6
6
6
6
6
mwc
