PENDING JOB ORDERS - Laguna · understanding and working knowledge of Transmission Networks...

of 13

PISCES INTERNATIONAL PLACEMENT

POEA LICENSE No: 057-LB-030708-R

MAIN OFFICE: UNIT 101 (F) 8284 Dr. A. Santos Ave., San Dionisio, Sucat Road, Parañaque City

Telephone Nos: 825-6599 / 820-0399 Cellphone Nos: 0922-821-8036 / 0922-821-8034

E-mail Address: [email protected] Website : www.piscesplacement.com

Branch Offices: CAGAYAN DE ORO : JMC Bldg., J.V. Sereña St., Carmen Cagayan de Oro City

Telephone / Cellphone No: 088-858-6765 / 0922-821-8035

CEBU :LDM Bldg., MJ Cuenco Ave., cor. Legaspi St. Cebu City

Telephone / Cellphone Nos: 032-238-3492 / 0922-821-8032

DAVAO :2/Flr. Unit 6 & 7 RC Bldg., G. de Guzman St. Davao City

Telephone / Cellphone No: 082-221-5113 / 0922-821-8033

PENDING JOB ORDERS (As of 13 JULY 2011)

TRANS TELECOMS COMPANY (Accre. # 10144965) – Riyadh, KSA

PRINCIPAL WILL CONDUCT FINAL INTERVIEW ON:

MAIN OFFICE - JULY 13-16 & 23, 2011

DAVAO Branch – 18-19 JULY 2011

CEBU Branch – 20-21 JULY 2011

PESO BACOLOD – 22 JULY 2011

ADSL TECHNICIANS (100) – must have at least three years (Local copper access network) experience with a recognized

carrier, (Previous STC experience advantageous). (The applicant will be tested on his knowledge). Willing to work in the

Kingdom of Saudi Arabia, (Previous similar verified experience in KSA advantageous, other GCC Countries are not

considered as KSA experience). Preference will be given to those applicants that have previously worked on STC project,

worked previously in KSA and have Arabic language skills. Working knowledge from MDF through cross connection points (cabinets) to protectors (DPs) and internal customer wiring. (Local copper access network – Primary & Secondary – “E” &

“D” sides). Knowledge of MSAN’s within the copper access network (Fibre fed Multiplexer cabinet). Identify fault locations

within the copper access network . Able to terminate copper cables on various termination blocks. Able to run cross

connection jumper wiring. Experience of installing and commissioning ADSL Modems in customer premises. An

understanding of Cisco routers is advantageous. Ability to read understand and implement written job requirements. An

understanding of access network drawings and plans with the ability identify various network elements. Familiar with MS

Office (Word, Excel & E mail). Familiar with any work management system. English speaking, (Arabic very advantageous).

Valid Driver's License is a required.

GSM ENGINEERS (5) – Excellent and Strong knowledge in wireless cellular Network specially GSM, UTMS and LTE

Networks. At least 2 years of experience as an Installation Engineer / Technician for rollout of RBS equipment at site.

Experience with Ericsson & Huawei rollout of other radio transmission equipment is an advantage. Strong troubleshooting

skills. WCDMA Basic principle. RNC/nodeb troubleshooting experience. Excellent communication skill. Ability to Working Well Under pressure. Strong service mind and sense of responsibility. Highly motivated, mature, professional and willing to

provide 100% performance

SDH/DWDM ENGINEERS (5) – Skilled / trained engineers with experience on SDH & DWDM Optical network installation

and commissioning. Experience in DWDM/CWDM, and SDH, technical standards and applications. Must have significant

understanding and working knowledge of Transmission Networks Fundamentals and principles, PDH, SDH, Optical, Ethernet,

IP, DWDM,WDM. Commissioning of Huawei OSN 3500,7500/Optix Series and DWDM Equipment. Should have expertise

on ring topology, cut over’s, Expansion Project, and protocols. Be familiar with Huawei NG-SDH Equipment, software

upgrade of optical Network Equipment. Strong skills and knowledge in use of computer, telecommunications products. Good

analytical ability, presentation and interpersonal skills Very good team player with colleagues, service providers and

customer. Good communication skills - written, spoken and presentation. Good knowledge in English, both written and

spoken GSM TECHNICIANS (16-20) – At least 2 years of experience as an Installation Technician for rollout of RBS ,

RNC/NodeB and Transmission equipment at site. Experience with Ericsson & Huawei rollout of other radio transmission

mailto:[email protected]

http://www.piscesplacement.com/

of 13

equipment is an advantage. Strong troubleshooting skills. WCDMA Basic principle. Excellent communication skill. Ability to

Working Well Under Pressure. Strong service mind and sense of responsibility. Highly motivated, mature, professional and

willing to provide 100% performance.

FTTH TECHNICIANS – The ideal candidate will have worked in a similar role for at least 3 years and will have

demonstrable experience of working with fibre optic cables in a telecommunications environment. He must be able to splice

fibres using a Fusion Splicer along with a having a working knowledge of testing with an Optical Time Domain Reflectometer

(OTDR) and Power Metre Light Source. Experience of working within Copper and ADSL systems is also highly desirable.

The potential candidate will have worked in a similar capacity in an external telecommunications environment and will also

possess excellent verbal communication skills. In addition, he will possess well developed Customer Care skills.The candidate

will have a full driving license and be expected to pass a Saudi driving test very soon after arrival. He will be in good physical

health and have a highly flexible and adaptable attitude to his work.

UP SCALE CLUB & SPA - Riyadh, K.S.A.

ABSOLUTELY FREE PLACEMENT FEE

With over 20,000 square meters top quality indoor and outdoor facilities, up scale is one of the premiere clubs in the Middle East. Up Scale also offers an array of associated products and services in KSA, all

designed to improve fitness and health. FITNESS SUPERVISORS – 25-35 years of age. At least 2-3 years as fitness supervisor, plus several years working experience at a leading health club, franchise club such as Fitness First, Gold’s Gym etc. or in a 5 star hotel health club.

Physical education graduate from an established university or college with certification in fitness instruction or with fitness

industry experience as a fitness instructor of at least 5 years with leading fitness industry service providers, and with fitness

industry seminar certification to show ongoing successful fitness education. Good working knowledge of stretching, cardio

vascular (CV) machine workouts, plus machine and free weight workouts. Certification within the last year for first aid/CPR.

Pleasant manner, good spoken and written English and or Arabic. In good physical condition and appearance (overweight out

of shape candidates not accepted). Skilful in working with people of other cultures

FITNESS INSTRUCTORS – 25-35 years of age. Several years working experience at a leading health club, franchise club such as Fitness First, Gold’s Gym etc. Or in a 5 star hotel health club. Physical education graduate from an established

university or college with certification in fitness instruction or with fitness industry experience of at least 5 years with leading

fitness industry service providers, and with fitness industry seminar certification to show ongoing successful fitness education.

Good working knowledge of stretching, cardio vascular (CV) machine workouts, plus machine and free weight workouts.

Certification within the last year for first aid /CPR. Pleasant manner, good English and or Arabic. In good physical condition and appearance (overweight out of shape candidates not accepted). Skilful in working with people of other cultures

MALE RECEPTIONISTS - 25-35 years of age. Several years working experience at a leading health club, franchise club

such as Fitness First, Gold’s Gym etc. Or in a 5 star hotel health club. College graduate, with pleasing personality, good in

communication skills.

ASAMCO ARABIA ALUMINUM MANUFACTURING CO.

(Accre #10135167) - Riyadh, K.S.A.

PLANNING ENGINEER (2) – BS Architecture or BS Civil Engineering. Minimum 2 years work related experience.

Familiar in Primavera 3.1 or Primavera 6 (P6)

QA/QC ENGINEER (2) – BS Architecture or BS Industrial Engineering, Mechanical Engineering or Civil Engineering.

Minimum 2 years related experience. Knowledgeable on aluminum profile and fixation

CONTRACT ENGINEER (2) – BS Architecture or BS Civil Engineering. Minimum 2 years related experience. Familiar on

FIDIC contract condition

COST CONTROLER – BS Architecture or Bachelor of Science In Civil Engineering. Minimum 2 years work related experience. Familiar with CONEX and MANEX Analysis, cost budgeting, cost risk assessment and Cost performance index,

Progress Payment Methodology and Cash Flow Forecasting, WBS Structuring (linked to program and progress payment

methodology) Primavera 3.1 or P6.

AUTOCAD DRAFTSMAN – BS Architecture or BS Civil Engineering / Mechanical Engineering. Minimum 2 years work

related experience. Well versed on AutoCAD operation. Can prepare Design Concept as per Client's requirements.

EXECUTIVE SECRETARY (Male) – College grad, w/ minimum 2 years experience in the same field. Fluent in English &

has excellent communication skills. Must have pleasing personality.

TECHNICAL DOCUMENT CONTROLLER - To establish, implement, monitoring and control regular incoming/outgoing

correspondence. Establishing efficient management systems for traceability of all document including numbering and type

prefix structure .Numbering document, procedure include protocols and arrangement for the web based communication

.condition. Well versed on preparing technical report and monitoring. Knowledgeable on Computer software available for

Document Controller. With 2 years Experience in construction industries

ALUMINUM INSTALLER/FABRICATOR (45) – High School or Vocational graduate. Minimum 2 years work related

experience. Previously works as an Aluminum Site Installer. Familiar on aluminum curtain wall, ACP cladding fixation.

of 13

Familiar in factory aluminum tools and equipment e.g. CNC Machine, Metal bender or miter saw machine..etc. Can interpret

cutting list or plan requirements

ELECTRICIAN – High School or Vocational graduate. Minimum 2 years related work experience. Previously work as a

building/factory maintenance electrician. Can trouble shoot building/factory electrical wiring and equipment. Familiar to

electrical codes, system and diagram.

MECHANICAL TECHNCIAN – with 2 years experience in FACTORY. Familiar with the CNC machine, Mitter saw and

other aluminum factory machine. Knowledgeable on preparing trouble shooting report.

STRUCTURAL ENGINEER – BS in Civil Engineering. Minimum 2 years experience in the same field. Familiar in STAAD

software, operating and application or any software applicable for aluminum and glazing. Knowledgeable in Aluminum

Curtain wall, ACP cladding or aluminum louver Design Calculation is advantage.

HBK CONTRACTING CO. (Accre # 10137344) – Doha, Qatar


TENTATIVE SCHEDULE OF INTERVIEW - JULY 29-31, 2011

FABRICATION SUPERVISOR -Piping/Vessel (2) FABRICATION QC INSPECTOR (2)

WELDING FOREMAN MECHANICAL PAINTING FOREMAN (2)

FABRICATOR - Piping/Vessels/Structures (5) MIG WELDER (5) HEAVY DUTY TRUCK DRIVER (25) MECHANICAL DRAFTSMAN (FABRICATION PROJECTS) PAINTING FOREMAN

SECRETARY / DOCUMENT CONTROLLER

SAUDI CRANES & STEEL WORKS FACTORY - Jubail, K.S.A.

ERECTION ENGINEER (Mechanical) – Mechanical Engineering graduate, experience on overhead crane manufacturing,

installation, erection, assembly, overhauling (cranes), mechanical design experience, crane girder manufacturing experience &

machining of the part & precise fitting experience.

SERVICE ENGINEER - Degree in Electrical / Mechanical Engineering. A dynamic & result oriented professional with more than three years of experience in after-sales-service, customer support, cranes spare parts and maintenance with a strong

background of sales. Experience in any crane manufacturing industries is a must.. Proficient in leading a team of technicians

on all technical matters to analyze product performance and provide technical feedback to the clients. Directing the team in

ensuring customer satisfaction by maintaining excellent turn around time (TAT) for delivery & service quality norms.

Familiarity with DIN, FEM AWS CMAA, ASTM, BS and other similar standards would be a definite advantage. To be able to

resolve the complaints/maintenance requests by maintaining a healthy relationship with customers. Identify and pursue new

business opportunities. Customer support and coordination with the client. Prepare quotations and all bidding activities. Good

Knowledge of Cranes spare parts. Good communication and presentation skills. Computer literate.

SPARE PARTS ENGINEER – Diploma in Engineering. Field experience / work experience on spares. Preparation of

various spare parts packages and cataloging. Recommended spare parts data package – cataloging experience. Maintaining and

monitoring the inventory. Estimation / preparation of quotations / review of P.O’s. Thorough computer knowledge MECHANICAL SUPERVISOR - Diploma in Engineering (mechanical). Minimum 5 Yrs field experience on Over head

crane assembly, fitting, Erection etc. Thorough knowledge about crane functions and components. Working experience on

trouble shooting, mechanical repairs, modernization, Erection, alignment inspection etc. Good communication skills. Must

understand the mechanical drawings. Basic Electrical knowledge

ELECTRICIAN TEAM LEADER (2) – ITI. Minimum 6 Yrs clear hand on experience on Overhead cranes. Must be able to

command a group of Electricians. Must read and understand wiring diagrams. Knowledge about the basic crane controls and

frequency control operations. Good communication skills (English)

CRANES ELECTRICIAN (4) – ITI. Minimum 5 Yrs clear hand on experience on Overhead cranes. Must read and

understand wiring diagrams. Knowledge about the basic crane controls and frequency control operations. Good

communication skills

MECHANICAL FITTER (3) – Minimum 5 Yrs clear hand on experience on Overhead cranes. Must have the ability to read

manufacturing drawings. Ability to complete installation work for various projects. Ability to work on installation and modifications to plant and equipment. Ability to assist in Crane assembly, repairs and testing.

SAND BLASTER – Min. 5 years experience in similar position. Possessing thorough knowledge of all the sand blasting

operations including safety guidelines. Good in communicating in English.

GHANIM AL MAZROA CONSULTANTS ENGINEER (Accre. # 10100031)

– Riyadh, K.S.A.

SAUDI ELECTRIC CO. PROJECT – Riyadh, K.S.A. SR. CONTRACT REPRESENTATIVES – BSCE/EE/ME grad/10 yrs exp in procuring contracts/developing bid

documents/contract documents for Civil/Electrical/mechanical works or projects/operation/maintenance

of 13

services/related projects/services/10 yrs exp in developing scopes of work/technical specifications /computer

literate

CONTRACT REPRESENTATIVES – BSCE/ME grad/min 5 yrs exp in procuring contracts/developing bid

documents/contract documents for Civil/Electrical/mechanical works or projects/operation/ maintenance services/related projects/services/10 yrs exp in developing scopes of work/ technical specifications/3 yrs exp in

handling/negotiating/resolving contract disputes/claims/ computer literate

ARCHITECTURAL DRAFTSMAN – Minimum five [5] years relevant experience. Knowledge in Manual drafting. Knowledge in Autocadd, Photoshop, 3D programs, MS office (Word, Excel, Powerpoint) & other related softwares &

programs. Able to work independently or with a team, with less supervision.

INDUSTRIAL ENGINEER – Bachelor of Industrial Engineering. 10 years experience. Experience dealing with

applications of modern performance management. Experience in Strategic Planning. Experience in the design and analysis and

development processes. Ability to work on applications of comprehensive ERP. Understand, absorb and deal with total quality

programs. Proficient in both oral & written English. Excellent experience in the use of Microsoft Office programs.

SAUDI ELECTRIC CO. PROJECT – Dammam, K.S.A. CIS APPLICATION DEVELOPER – Have done system documentation and user manual writing at least one time. 30-45 years old. Must have experience in ASP.NET programming (3 years), Visual Basic.NET (4 years),Web Designing (4 years)

Active Server Pages programming (VB) 4 years, Visual Studio 2003 & 2005 (4 years),

SQL Server (3 years), Crystal Report and .NET programming (3 years). Working in workflow system such as Adobe and

archival system such as FileNet of similar product. Excellent command in both written and spoken English. B.S. Degree in

Computer Science or related fields acceptable to Saudi Electricity Company.

ALFARDAN MARINE SERVICES – Doha, Qatar


MARINE TECHNICIAN (5) – Min. 5 years experience, preferably w/ overseas work experience, age between 28-38 years

old, and married with children

ALFARDAN GROUP HOLDING CO. – Doha, Qatar


AUTO DENTER (3) AUTO SPRAY PAINTER

- Minimum 5 years experience. Experience MUST have been gained in branded Body-Shops like BMW, Mercedes,

Toyota, Nissan, etc. Candidates with prior Gulf experience are preferred. Age should be 28-35 years old, married &

w/ kids

HEAVY EQUIPMENT TECHNICAN – Male, 27-38 years old, specific Scania, Terex, Volvo Heavy Equipment experience is required, GCC experience is an advantage

PRESTIGE CARS CO. – Doha, Qatar


LIMOUSINE DRIVER (35-40) – at least college level, can communicate well in English, polite & courteous, presentable &

w/ pleasing personality. Minimum 3 years experience as Driver preferably in a Hotel or rent a car company. Drivers w/

experience in driving limousine is an advantage. Must have valid professional driving license. Age should not be more than 35

years old.

MALE COUNTER STAFF (5) – College graduate, fluent in English both oral/written, must have minimum 2 years related

experience, presentable & w/ pleasing personality. Must be presentable. Age not more than 30 years old.

ALFARDAN AUTOMOBILES – Doha, Qatar


PARTS PICKER – Male, 21-25 years old, spare parts experience in automotive industry is preferred, GCC experience is an

advantage

BMW TECHNICIAN – Male, 27-38 years old, specific BMW experience is required, GCC experience is an advantage

MAINTENANCE TECHNICIAN – Male, 27-35 years old, related maintenance work experience is preferred, GCC experience is an advantage

CASHIER (M/F) – 25-28 years old, related experience is preferred, GCC experience is an advantage.

ALFARDAN PREMIER MOTORS – Doha, Qatar


PARTS STOCK CHECKER – Male, 24-28 years old, spare parts experience in automotive industry is preferred, GCC

experience is an advantage

of 13

LAND ROVER/JAGUAR TECHNICAN – Male, 27-38 years old, specific Land Rover and Jaguar experience is required,

GCC experience is an advantage.

ALFARDAN GROUP – Doha, Qatar


ALI M. AL QAHTANI EST. (Accre. # 10041251) – Dammam, K.S.A.

HVAC ENGINEER QC ENGINEER MOTOR REWINDER (2)

AL-MANNA METALS (Accre # 10160434) – Riyadh, K.S.A.

DIE CASTING OPERATOR CNC MAHINE CENTER OPERATOR

CNC LATHE MACHINE OPERATOR CAD/CAM PROGRAMMER DIE MAKER

YUKSEL INSAAT A.S. - Riyadh, K.S.A.

MECHANICAL ENGINEER ACCOUNTANT DRAFTSMAN (2) MECHANIC

WELDER HEAVY DRIVER BOBCAT OPERATOR

SAUDI INDUSTRIAL CONSTRUCTION & ENGINEERING PROJECTS (SICEP)

Riyadh, K.S.A.

All candidates should satisfy the requirements described under each category & the following general rules:

· Good communication & interpersonal skills in English

· Should be result oriented with ability to learn

· Ability to work under pressure

· Ability to work in a Team

· Should be medically fit

· Should be between 28 and 40 years old CIVIL SITE ENGINEER (4) – Should have a Bachelor of Science in Civil Engineering with 2 to 5 years working

experience especially in Water transmission lines & Sewage networks. Able to lead workers & guarantee performance. Should

have good experience in Computer Software (Microsoft office, Microsoft Project, Primavera, STAAD, SAP, Auto CAD 2D

& 3D). Should be able to control of cost of a project. Should have knowledge to make cost analysis of items. Able to estimate

quantity independently. Should have knowledge in project planning. Good knowledge in QA & QC. Speaks, writes &

reads English Fluently. Holds a valid Driving License.

CIVIL SURVEYORS (10) – Should have a Diploma in Civil Engineering 5 years working experience in structure, and in

Water transmission lines & Sewage networks. Should have good experience in design. Should have good experience in

detailed design of water/sewage treatment Plant & pipe line project. Should have good experience in using total station &

theodolites & auto levels etc. Able to estimate quantity independently. Should have good experience in AutoCAD 2D & 3D, also Microsoft office, & Excel. Speaks, writes & reads English Fluently. Holds a valid Driving License.

METROLOGICAL MECHANICAL ENGINEER (2) – Should have a Bachelor of Science in Power or Mechanical

Engineering with 5 years working experience in welding holding certificates of AWS/ CWI( American welding society/

Certified welding inspector). Should have experience in welding carbon steel pipes. Should have good experience in miter

cutting & micro miter work. Able to prepare effective reports. Should have experience in computer programs related to work. CARBON STEEL PIPE WELDERS (20) – Certified in carbon steel welding (6G & 6RG), with a min experience of 5 years in carbon steel pipes welding. Have experience in welding carbon steel pipes. Should have good experience in miter cutting &

micro miter work. Should have very well built healthy body. Should be very presentable & polite. Ex Yuksel / Mapa-Limak

workers will be given priority

HEAVY TRUCK (TRAILER) DRIVERS (11) – Should have very good experience in driving new model Dump Trucks &

Trailers , minimum experience 7 years. Should be presentable & polite. Should have Heavy duty digital driver license.

ALKHALEDIAH AGRICULTURAL COMPANY (Accre. # 10152921) – Riyadh, K.S.A.


MAINTENANCE SUPERVISOR - Engineering Degree (preferably electro-mechanical). Minimum seven (7) years

experience in maintenance. With knowledge in electrical motors, pumps, electric heaters, exhaust fans, lightings circuitry, air conditioning and associated controls, generators and related switching, plumbing, sanitary piping. Knowledge in kitchen

equipments, swimming pools, water treatment. Carpentry, civil works is of great advantage. Driving capability is of great

advantage. Preferable Age between 35-45 years old. Fluent in English. Computer Literate (ability to use Microsoft Windows

of 13

Programs) will be considered an asset. Capable of reading technical drawings and blueprints. Ability to recognize and

interpret technical references.

ELECTRONIC TECHNICIAN – High School Diploma or General Education degree (GED): and the ability to learn and

perform required duty. Working knowledge of satellite Television Services. Completion of approved training courses in

electronics.2 years experience in the installation, maintenance and operation, repair and operation of various type of electronic

equipment is required

PUMP TECHNICIAN H.E. MECHANIC CATERPILLAR MECHANIC

VIDEO HOME & ELECTRONIC CENTRE (Accre #10100866) – Doha, Qatar

SR. MEP PROJECT MANAGER (2) MANAGER SALES & MARKETING (Room AC)

SR. MEP PROJECT ENGINEER (3) SR. HVAC PROJECT ENGINEER

SR. PROCUREMENT ENGINEER - MEP (5) PROJECT SUPERVISOR (5)

SUPERVISOR ACCOUNTS (2) DUCT FACTORY SUPERVISOR (2)

SALES & MARKETING OFFICER - Corporate Sales (2)

SALES & MARKETING OFFICER - Key Retail Customers (2)

SALES EXECUTIVE (2) STOREKEEPER - SCLD (3)

MARKETING OFFICER - Appliances, Electronics, IT, GSM (2) STOREKEEPER - MEP (2)

FIRE ALARM/FIRE FIGHTING INSTALLATION TECHNICIAN (5)

LCD/LED TV TECHNICIAN (2) CNC MACHINE OPERATOR (2) DUCT FABRICATOR (4)

UNITED AIR CONDITIONING & ELECTRICAL COMPANY – Riyadh, KSA

HVAC ENGINEER ELECTRICIAN

UNITED COMPANY FOR CARAVAN & PREFAB HOUSES (Accre # 10177054) -

Riyadh, K.S.A.

ELECTRICAL ENGINEER – Knowledge in Designing and AutoCAD, Low Voltage and High Voltage, Fire Alarm Design,

IT wiring and Design

YOUSEF AHMED AL GOSAIBI & PARTNERS CO. LTD. – Al-Khobar, K.S.A. AC TECHNICIAN CAR ELECTRICIAN DIESEL MECHANIC

HEAVY DUTY/TRUCK/TRAILER DRIVER – Can drive heavy duty trucks (around the Kingdom), light vehicles and

Arabic speaking with sales experience in Gulf countries is preferred.

NESMA & PARTNERS CONTRACTING CO. - Mekkah, K.S.A.

QA/QC ENGINEER (CIVIL) ELECTRICAL TECHNICIAN MECHANICAL TECHNICIAN

- For all above positions - must have CHILLED TOWER & WASTE WATER PLANT, REVERSE OSMOSIS (R/O) PLANT

experience.

ELECTRICAL ENGINEER – Low Voltage, BMS System, CCTV System

SAFETY ENGINEER (MECHANICAL) – w/ Nebosh Training/certificate. 5 years work related experience

MUSLIM CLADDER (5) MUSLIM INSULATOR (5) MUSLIM INSULATION ASST. (5)

MUSLIM STEEL FIXER (30) MUSLIM PAINTER (10) MUSLIM FINISHING CARPENTER (10)

MUSLIM DUCTMAN (10) MUSLIM ELECTRICIAN ASST. (10) MUSLIM PIPE FITTER (10)

MUSLIM PIPE FITTER ASST. (10) MUSLIM SCAFFOLDER (10) MUSLIM TILER (20)

RIGGERS (Christian or Muslim)

GOLDEN TULIP ALHAMRA HOTEL – Dammam, K.S.A.

CAPTAIN WAITER (6) WAITER (6) COOK/KITCHEN HELPER (4)

DEMI CHEF (2) CHEF DE PARTE (2) BUTCHER PLUMBER

ELECTRICIAN ELECTRO-MECHANICAL TECHNICIAN

BUTCHER LAUNDRYMAN/PRESSMAN

AHMAD HAMAD ALGOSAIBI & BROS. – Al-Khobar, K.S.A.

LINUX ADMINISTRATOR NEON LIGHT INSTALLER/TECHNICIAN

AL WAROUD TRADING & CONTRACTING CO. –

Muscat, Oman

CIVIL ENGINEER (2)

ARABIAN EDUCATION & TRAINING GROUP - Riyadh, K.S.A.

ESOL INSTRUCTORS – Male instructors required for teaching E.S.L. To adult trainees in Saudi Arabia. These students

are college freshmen, civil servants, military personnel and generally public and private sector employees.

of 13

A masters degree in TESOL/ English education or English literature , other degrees shall not be counted for

remuneration package allocation. Graduate degree supplemented by a professional certification shall be well

compensated.

Ph.d in Linguistics, English education/curriculum & instruction with English education track. Any supplement

professional credential shall be considered for extra compensation. Any other doctoral qualifications shall not be

considered in lieu of fulfillment of the position requirements. Experience in research related to TESOL, faculty tenure

shall be appreciated and recommended for appropriate compensation.

Pd.ed in teaching and learning/English teaching. TESOL also acceptable. Experience in teaching practice shall be

compensated in remuneration package.

SADEEM AGRICULTURAL CO. - Riyadh, K.S.A.

LANDSCAPE MANAGER – BS Agriculture Engineering grad or higher degree in landscaping horticulturist. Minimum 7

years experience in supervisory position in the field of grounds & landscaping operation w/ knowledge in irrigation system.

Good English communication skills & basic Microsoft programs. Preferably can speak Arabic

NURSERY MANAGER – BS Degree in Agricultural Engineering, Nursery Management or equivalent degree. Min. 8 years

experience direct field experience at commercial production nursery.

LANDSCAPE SUPERINTENDENT – BS degree in Agricultural Engineering. 7 years experience in the field of ground &

landscaping in an environment similar to Arabian Gulf region.

LANDSCAPE SUPERVISOR (8) – BS degree in Agricultural Engineering. 5 years experience of ground & landscaping in an environment similar to Arabian Gulf region.

LANDSCAPE FOREMAN (8) – Technical college diploma in Agriculture. 3 years experience in the same field. Should be

able to speak & write in English.

C&U SUPERINTENDENT – BS degree in Engineering (Civil/Electrical). 7 years experience in the field of construction & 5

years experience as Superintendent.

C&U SUPERVISOR – BS degree in Civil Engineering. 3 years experience in operation & maintenance.

C&U FOREMAN – Technical college diploma with 3 years experience in the same field

IRRIGATION SUPERVISOR – BS degree in Agricultural Engineering. 5 years experience in landscaping & irrigation

system

ELECTRICAL FOREMAN – Technical college diploma w/ 3 years experience in the same field.

HORTICULTURIST – Bachelor degree in Agricultural engineering. 7 years experience in plant propagation & landscaping.

PLANT PATHOLOGIST – BS in Agriculture (Plant Pathologist or Entomology). Min. 5 years experience on plant protection, plant diseases, pest control & plant propagation.

CHIEF MECHANIC – BS in Mechanical Engineering. Min. 5 years experience in the repair of all types of vehicles &

equipment. At least 3 years of which should be in supervisory capacity.

MECHANIC (2) – Technical college diploma/certificate in Auto Diesel Mechanic. Min. 5 years practical experience in the

same field.

SAFETY OFFICER – Technical Institute grad w/ seminars & trainings certificate. At least 2 years experience in the same

field.

PROCUREMENT OFFICER – Technical/College diploma w/ 3 years experience in procurement of materials including 2

years supervisory position. Computer literate & internet savvy.

BUYER – Should have Technical Institute diploma. 3 years experience in purchasing & canvassing. Should be able to speak

in English & Arabic. AUTO ELECTRICIAN – Technical College Diploma w/ 3 years experience in the same field.

AUTOCAD OPERATOR (2) – Should have a technical diploma level in architecture/drafting. Min. 3 years experience in

using Auto CAD Software.

DOME MAKKAH CONCRETE MIX PRODUCTS – Makkah, K.S.A.

HYDRAULIC MECHANIC (2) DIESEL MECHANIC MASON (5)

H.E. MECHANIC (2) LAB TECHNICIAN

- For all above positions – MUSLIM APPLICANTS ONLY & should have relevant work

experience in the same field.

SAUDI ARABIAN PACKAGING INDUSTRY – Dammam, K.S.A. &

Dubai, U.A.E.

QUALITY ASSURANCE INSPECTORS - Holder of college diploma/College level. Good English communication and writing skills. Familiar with ISO 9001:2000 standard. Computer literate: Microsoft excel, word and etc. Knowledge in

statistical techniques is an advantage. Minimum 5 years experience as Quality Assurance Inspector in can making industry

with expertise in can assembly and components’ manufacturing. Knowledge in lithographic printing and coating is highly

advantage.

of 13

EXECUTIVE SECRETARY (Male) - has MPA, B.SC degree in secretary / has 5 years experience in Industrial companies

at least/age between 30 – 35/ good communication skills /office management (filing, appointment, reception, telephone calls ) /

editing skills / knowledge of Microsoft Office and telephone protocol /computer literate with the ability to learn new software

applications.

LITHOGRAPHIC PRINTER – Carton or Paper Printers who have worked on large format offset machines will also be

considered for the above position. Candidates must meet the following criteria to be considered for an interview. Age: 25 - 35

years old. High School, Candidates having a Diploma in Printing Technology or completed a full apprenticeship with leading

Metal Decorators will be given preference. Good in Speaking, Reading & Writing in English Should have a minimum of 5

years Metal Decoration experience. Candidates with previous overseas experience and having experience on Crabtree 1290 or

Fuji printing presses will have an added advantage.

ALMAHARAH SEAFOOD RESTAURANT – Doha, Qatar

OPERATIONS MANAGER – Must have at least 7 years experience in casual to fine dining restaurants (preferably 5 star

hotel restaurants), handling at least 5 branches and in the same capacity. Must have knowledge and experience in Planning,

Leading, Organizing and Control. Must have strong time management, customer service management and negotiation skills.

Must be experienced in promotions, marketing and advertising. Must have strong people management skills, including

performance management. Must be experienced in making set menus, food costing, and inventory management. Must have an

in depth knowledge on Good Manufacturing Processes and HACCP. Must have knowledge and experience in operations

policy making and implementation. Must be willing to work long hours and on a shifting schedule. Educational Requirement:

Must be a Bachelor’s Degree Holder KITCHEN MANAGER – Must have at least 5 years experience in a 5 star hotel in the same capacity. Must have strong

personality and with strong people management skills and implementation skills. Must be experienced in making set menus,

food costing, and inventory management. Must have an in depth knowledge on Good Manufacturing Processes and HACCP.

Educational Requirement: Must be a Bachelor’s Degree Holder. Age Requirement: 30 to 40 years old

SOUS CHEF – Must have at least 5 years experience in a 5 star hotel in the same capacity. Must have strong personality and

with strong people management skills and implementation skills. Must be well experience in Quality and Production Control.

Must have an in depth knowledge on Good Manufacturing Processes and HACCP. Age Requirement: 30 to 35 years old

KITCHEN ARTIST – Must have at least 2 years experience in a 5 star hotel. Must be creative. Must have ice, fruit and

vegetables carving skills. Must have strong quality and production control Skills. Education Requirement: Must at least be an

Associate in HRM or equivalent. Age Requirement: 25 to 35 years old

STOREKEEPER – Must have strong inventory management skills. Must be keen and observant to details. Must have in depth knowledge and experience in GMP and HACCP and its implementation. Must be experience in using Microsoft Office

Applications, specifically MS Excel

HVAC TECHNICIAN (2) – Must have at least 5 years experience in the same capacity.Knowledge and Experience in

troubleshooting: Kitchen Equipments, Refrigerators and Chillers, Air Conditioning Units. Knowledge in the following is an

advantage: Electrical, Welding, Plumbing, Carpentry, Masonry. Preferably with a valid GCC Driver’s License. Age

Requirement: from 25 to 35 years of age

WAITER/WAITRESSES (5) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing

personality. Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an

advantage. Must have in depth knowledge of customer service and has experience in handling customer complaints. Must be

familiar with the customer cycle. Height requirement: at least 5”4 for females and 5”6 for males. Age requirement: from 23 to

30 years of age

BARTENDER (2) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing personality.

Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an advantage. Must

be experienced in using different bar equipments.. Knowledge and experience in serving is an advantage. Height requirement:

at least 5”4 for females and 5”6 for males. Age requirement: from 23 to 30 years of age

CASHIER (2) – Must have at least 2 years experience in casual to fine dining restaurants. Must have pleasing and strong

personality. Must be able to communicate well in the English Language; to be able to communicate also in Arabic is an

advantage. Must have in depth knowledge of customer service and has experience in handling customer complaints.

Educational Requirement: Any business related course. Height requirement: at least 5”4 for females and 5”6 for males. Age

requirement: from 23 to 30 years of age

MS INTERNATIONAL MANAGEMENT CONSULTANTS - K.S.A.

SURVEYOR ENGINEER (5) ARCHITECT (5) ELECTRICAL FOREMAN (5)

HVAC FOREMAN (5) ELEVATOR FOREMAN (5) FIRE ALARM FOREMAN (5)

ROYAL PALACE – Riyadh, K.S.A.

MALE CLEANER (5) – must have experience in the same capacity preferably in a hotel

ACE CONTRACTING CO. (Accre # 10178349) – Riyadh, K.S.A.

ELECTRICAL TECHNICIAN (2) MECHANICAL TECHNICIAN (2)

of 13

AL-OTAIBI STEEL FABRICATION FACTORY – Jubail, K.S.A.

STEEL FABRICATORS CERTIFIED WELDERS (6G/4G/3G) AUTOCAD OPERATORS

PIPE FITTERS MECHANICAL TECHNICIANS MACHINIST (all around)

VALVE TECHNICIANS

MADAM NAJAT ALGOSAIBI – Al-Khobar, K.S.A.

DRESSMAKERS (Cut & Sew)

THE BAGEL SHOP – Al-Khobar, K.S.A.

BARISTA/COFFEE MAKER – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food &

Beverage Services Management or equivalent. At least 2 years of working experience in the related field is required for this position. Preferably 2-4 Yrs Experienced Employees specializing in Food/Beverage/Restaurant Service or equivalent. With

good commands of oral and written English. Male, Age: 23 - 32 years old

COOK – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food & Beverage Services

Management or equivalent. Experience in Baking; Sandwich and Pizza Making; and Pastry. At least 4 years of working

experience in the related field is required for this position. Preferably 4-8 Yrs Experienced Employees specializing in

Food/Beverage/Restaurant Service or equivalent. With good commands of oral and written English. Male, Age: 25 - 35 years

old

BREAKFAST COOK – Candidate must possess at least a Vocational Diploma / Short Course Certificate, Food & Beverage

Services Management or equivalent. Specialized in cooking Continental and American Breakfast. At least 4 years of working

experience in the related field is required for this position. Preferably 4-8 Yrs Experienced Employees specializing in

Food/Beverage/Restaurant Service or equivalent. With good commands of oral and written English. Male, Age: 25 - 35 years

old

APTC TRADING COMPANY – DAMMAM, KSA

ELECTRONIC TECHNICIANS – must have experience in revolving doors, shuttered doors and loading dock, well

experienced in Fiber Optic Perimeter Security, CCTV cameras, Microwave, etc.

COMPUTER TECHNICIANS – must have experience in revolving doors, shuttered doors and loading dock, well

experienced in Fiber Optic Perimeter Security, CCTV cameras, Microwave, etc.

SECRETARY (Male) – minimum 3 years experience in the same capacity, must have pleasing personality, 25-35 years old,

shorthand knowledge is a plus

AHMAD HAMAD ALGOSAIBI & BROS. – Al-Khobar, K.S.A.

NETWORK ADMINISTRATOR – Computer Science/Computer Engineering graduate. At least 2 years relevant experience,

relevant background in network administration, training in information and network systems. Experienced in local & wide

area management & administration. Experience in supporting Linux & Microsoft server technologies. Knowledgeable in

Linux & Microsoft Operating System, local & wide area networks, internet, e-mail system & configuration,

telecommunications & data communication. Able to install software packages & utilities. Conversant in both spoken & written English. Knowledge of Arabic language is an advantage. Possessing a Network Administrator Certificate, Certified in Linux &

Windows Administration. 23 years old & above.

SILVER STAR LABOR SUPPLY RECRUITMENT (Accre. # 10153223)

Abu Dhabi, U.A.E.

LADY DRIVERS – must have 5 years experience in Driving (after issuance of driver’s license), must have

pleasing personality, 25-40 years old, good command of the English language, GCC experience will be an

advantage HOUSEMAIDS – knows all household chores, diligent, trustworthy, hard working, polite/courteous, must have

pleasing personality, can easily adopt to new environment, can get along easily with people, cooking and GCC

experience is preferred. 25-40 years old.

AL-MANNA METALS (Accre # 10160434) – Riyadh, K.S.A.

MAINTENANCE ENGINEER – B.S.M.E. graduate, with at least 2 years experience in the same capacity, preferably with

experience in industrial maintenance (Electrical/Mechanical aspect), can perform preventive maintenance on electrical &

machining equipment. Good both in oral & written English.

SAUDI JORDANIAN GLASS CO. – Riyadh, K.S.A.

SUPERVISOR GLASS CNC MACHINE OPERATOR

of 13

GLASS BEVELLING MACHINE OPERATOR (2)

GLASS DRILLING/MILLING TECHNICIAN

GLASS CUTTER GLASS LAMINATOR (2) GLASS SAND BLASTER (2)

GLASS FUSSION (2) STAINED GLASS (2) GLASS PROCESSING MACHINE TECHNICIAN STAILESS STEEL WELDER (3) FRAMELESS GLASS INSULATOR (4)

SPIDER SYSTEM GLASS INSULATOR (4) CERCON COMPANY – Riyadh, K.S.A.

CIVIL ENGINEER (3) QUANTITY SURVEYOR (2)

AUTOCAD OPERATOR (2) LAB TECHNICIAN (2) ARCHITECT (2)

ZASCO – Riyadh, K.S.A.

MECHANICAL ENGINEER ELECTRICAL ENGINEER ELEVATOR TECHNICIAN

PUMP TECHNICIAN LAUNDRY TECHNICIAN

AFT & FASTWAY GROUP – Rastanura, K.S.A.

CIVIL ENGINEER (3) – Civil engineering graduate, must have minimum 2 years experience in KSA/GCC in

Petro-Chemical Construction.

DETECON AL SAUDI COMPANY - Riyadh, K.S.A.

IP-MPLS TECHNICIANS – Minimum 2 years experience in the field of O&M of CISCO/Junifer routers. Preferred

knowledge of the following types: CISCO CRS-1 and 76xx series; JUNIPER M320 and E1440. Sound knowledge in

NETWORKING, CONFIGURATION and TROUBLESHOOTING are advantageous. CCNA qualification is essentially

required. CCIE qualification is advantageous.

SATELLITE TECHNICIANS – Minimum 2 years experience in the telecommunications industry with emphasis on satellite

communication or radio transmission systems. Experience in HPA, GCE or Servo / Satellite Tracking Systems are preferred.

O&M Satellite test equipment (sweep generators, spectrum analyzers, BER Testers, power meters, video/audio test equipment,

power senors, etc.). Sound understanding of SDH fundamental principles is advantageous.

SDH TECHNICIANS – Must have 2 years experience in O&M of telecommunication network, sound understanding of SDH

fundamental principles and systems including DWDM and MESH networks with experience in Nokia/Siemens,

Alcatel/Lucent, Huawei SDH equipment or Submarine Cable Stations, familiar with telecommunication measurements (e.g.

Bit error tests), corrective and preventive maintenance. Technical diploma is a must.

FO CABLE TECHNICIANS – Strong working knowledge of telecommunications industry with necessity in the area of fiber

splicing & testing. Sound understanding of fundamental principles of optical transmission. Basic knowledge of transmission

network such as ring types, NE Name, slot, sub slot, port, vendor, transmission capacity, etc. Basic understanding of design

parameters of outside plant installation including civil construction requirements and material specifications. Sound

knowledge of fault management practices including fiber optic splicing & fiber optic cable handling procedures, quality

requirements for joints and connects for temporary and permanent repair, emergency and permanent restoration procedures,

fiber optic network fault detection procedures. Familiar with test equipment being utilized in fiber optic cable testing and fault

tracing (i.e. Cleavers, Fusion Splicer, Mechanical Splices, etc.). Ability to use cable locator for correct, safe & efficient

according to the standard operating procedures of the company. Able to read & understand outside plant As-Built & splice

diagrams. Able to understand cable utilization plans and technical drawings & manual of test & measuring instruments used in

outside plant.

NEW JOB ORDERS (As of 13 JULY 2011)

DR.BASSAM AL-HEMSI MEDICAL CENTER – Riyadh, K.S.A.

DIALYSIS HEAD (CHARGE) NURSE (2) – female, minimum 8 years experience in the field of dialysis. Have

the certification of Saudi commission for health specialties (valid Saudi Council license). Applicants with GCC

experience is preferred STAFF NURSE (6) – female, 3-4 years experience as a Staff Nurse. Preferred to have the experience as a Dialysis

Nurse or IV, ER , ICU Nurse . Have the certification of Saudi commission for health specialties (valid Saudi

of 13

Council license) . Applicants with GCC experience is preferred. Should have a bachelor’s degree in Nursing. CPR

certified.

ASSISTANT NURSE (6) – female, two years experience as an Assistant Nurse. Must have the certification of

Saudi commission for health specialties (valid Saudi Council license) .Should have a bachelor’s degree in Nursing CPR certified.

DAMMAM FACTORY for METAL PRODUCTS – Dammam, K.S.A.

SALESMAN – Must have experience in selling all types of blinds, curtain rods, aluminum ceiling, folding doors, should be computer literate, excellent knowledge in Microsoft Office specially power point. Very good in

presentation and have 2-3 years experience in the same field not more than 35 years of age. Knowledgeable in

Photoshop is advantage.

ALL QUALIFIED APPLICANTS MAY APPLY PERSONALLY WITH 2 SETS OF COMPREHENSIVE RESUME, DIPLOMA, CERTIFICATE OF EMPLOYMENT, SEMINARS / TRAININGS ATTENDED, 4 PCS. 2X2 PICTURE

(white background) ORIGINAL PASSPORT/NBI & OTHER CREDENTIALS.

FOR MANPOWER POOLING ONLY NO FEES TO BE COLLECTED. BEWARE OF ILLEGAL RECRUITERS

PENDING JOB ORDERS - Laguna · understanding and working knowledge of Transmission Networks...

Documents

Transcript of PENDING JOB ORDERS - Laguna · understanding and working knowledge of Transmission Networks...