PEC ILE Projectors ET-D75LE10 - Panasonic · 356.5 (14-1/32) ∅ 160 (6-5/16) 607 (23-29/32) 160...
Transcript of PEC ILE Projectors ET-D75LE10 - Panasonic · 356.5 (14-1/32) ∅ 160 (6-5/16) 607 (23-29/32) 160...
269 (10-19/32)
∅15
0 (
5-2
9/3
2)
607(23-29/32)
73(2-7/8)
540(21-1/4)
125(4-29/32)
S P E C F I L E
ET-D75LE10Zoom Lens for DLP™ Projectors
As of September 2010
SFD10A001-1
1 / 1
SpecificationsF value: 2.5Focal distance (f): 27.4 mm–35.4 mmThrow ratio: 1.3 –1.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.4 –1.8:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.4 –1.9:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 150 × 150 × 269 mm (5-29/32˝ × 5-29/32˝ × 10-19/32˝)Weight: 6.1 kg (13.4 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP™ projector. The lens makes
it possible to vary the projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic 3-chip DLP™ projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
265 (10-7/16)
∅13
4 (
5-9
/32
)
607(23-29/32)
69(2-23/32)
540(21-1/4)
121(4-3/4)
S P E C F I L E
ET-D75LE20Zoom Lens for DLP™ Projectors
As of September 2010
SFD10A002-1
1 / 1
SpecificationsF value: 2.5Focal distance (f): 35.0 mm– 50.9 mmThrow ratio: 1.7– 2.4:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.8 – 2.6:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.8 – 2.7 :1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝)Weight: 5.2 kg (11.5 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP™ projector. The lens makes
it possible to vary the projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic 3-chip DLP™ projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
265 (10-7/16)
∅13
4 (
5-9
/32
)
607(23-29/32)
69(2-23/32)
540(21-1/4)
121(4-3/4)
S P E C F I L E
ET-D75LE30Zoom Lens for DLP™ Projectors
As of September 2010
SFD10A003-1
1 / 1
SpecificationsF value: 2.5Focal distance (f): 50.5 mm– 97.9 mmThrow ratio: 2.4 – 4.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
2.6 – 5.1:1 for PT-D12000/DS8500 (4:3 aspect ratio), 2.7 – 5.2:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝)Weight: 5.2 kg (11.5 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP™ projector. The lens makes
it possible to vary the projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic 3-chip DLP™ projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
268 (10-9/16)
∅13
0 (
5-1
/8)
730(28-7/8)
124(4-7/8)
540(21-1/4)
124(4-7/8)
S P E C F I L E
ET-D75LE40Zoom Lens
As of April 2012
SFD12A008
1 / 1
SpecificationsF value: 2.5Focal distance (f): 96.6 – 154.1 mmThrow ratio: 4.6 – 7.4:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
5.0 – 8.0:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio), 5.1– 8.2:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 130 × 130 × 268 mm (5-1/8 × 5-1/8 × 10-9/16 inches)Weight: Approximately 5.0 kg* (11.0 lbs*)Applicable projector: PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X
Dimensions
This zoom lens is designed for use with Panasonic’s applicable projectors. The lens makes it possible to vary the
projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K.
* Average value. May differ depending on the actual unit.The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
NOTE: Please read the projector’s instruction manual for throw distances.Weights and dimensions shown are approximate. Specifications subject to change without notice.
347 (13-21/32)
∅16
0 (
6-5
/16
)
730(28-3/4)
203(8)
540(21-1/4)
203(8)
S P E C F I L E
ET-D75LE50Fixed-Focus Lens
As of April 2012
SFD12A009
1 / 1
SpecificationsF value: 2.5Focal distance (f): 14.8 mmThrow ratio: 0.7:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
0.8:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio), 0.8:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 160 × 160 × 347 mm (6-5/16 × 6-5/16 × 13-21/32 inches)Weight: Approximately 7.1 kg* (15.7 lbs*)Applicable projector: PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X
Dimensions
This fixed-focus lens is designed for use with Panasonic’s applicable projectors. The short-throw lens is ideal
for rear projection.NOTE: Please use the lens only on the specified Panasonic projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K.
* Average value. May differ depending on the actual unit.The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
NOTE: Please read the projector’s instruction manual for throw distances.Weights and dimensions shown are approximate. Specifications subject to change without notice.
356.5 (14-1/32)
∅16
0 (
6-5
/16
)
607(23-29/32)
160(6-5/16)
REMOTE 1 REMOTE 2 IN SERIAL LAN
VIDEO S-VIDEO IN RGB 1 IN DVI-D INRGB 2 IN
IN
IN R/PR G/Y B/PB
SYNC/HD VDOUT
OUT RS-232C IN RS-422 IN RS-422 OUTSERIAL LAN
VIDEO S-VIDEO IN RGB 1 IN DVI-D INRGB 2 IN
IN R/PR G/Y B/PB
SYNC/HD VDOUT
RS-422 IN RS-422 OUT
540(21-1/4)
212(8-11/32)
S P E C F I L E
ET-D75LE6Zoom Lens for DLP™ Projectors
As of September 2010
SFD10A006-1
1 / 1
SpecificationsF value: 2.5Focal distance (f): 19.63 mm – 23.54 mmThrow ratio: 0.9 –1.1:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.0 –1.2:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.0 –1.2:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 160 × 160 × 356.5 mm (6-5/16˝ × 6-5/16˝ × 14-1/32˝)Weight: 8.7 kg (19.2 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP™ projector. The lens makes
it possible to vary the projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic 3-chip DLP™ projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
404 (15-29/32)
∅15
0 (
5-2
9/3
2)
REMOTE 1 REMOTE 2 IN SERIAL LAN
VIDEO S-VIDEO IN RGB 1 IN DVI-D INRGB 2 IN
IN
IN R/PR G/Y B/PB
SYNC/HD VDOUT
OUT RS-232C IN RS-422 IN RS-422 OUT
607(23-29/32)
202.5(7-31/32)
540(21-1/4)
254(10)
S P E C F I L E
ET-D75LE8Zoom Lens for DLP™ Projectors
As of September 2010
SFD10A007-1
1 / 1
SpecificationsF value: 2.5–2.7Focal distance (f): 154 mm – 289 mmThrow ratio: 7.3 –13.8:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
7.9 –15.0:1 for PT-D12000/DS8500 (4:3 aspect ratio), 8.2 –15.4:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 150 × 150 × 404 mm (5-29/32˝ × 5-29/32˝ × 15-29/32˝)Weight: 8.5 kg (18.7 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP™ projector. The lens makes
it possible to vary the projection distance by changing the focal distance.NOTE: Please use the lens only on the specified Panasonic 3-chip DLP™ projector.
unit : mm (inch)NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.