PDi_1_2013

Bauma Ready to Roll!

Networking for Water Jetters page 14

Volume 13 • No. 1 Feb - mar 2013

Special Feature:

Bauma Stimulates Bucket Development

pages: 20-22

Reports:

Foreign Brands Grow in Popularity in China

pages: 58-59

Shows:

World of Concrete 2013“Bloom in the Desert”

pages: 24-29

What is New in GPR Technology? page: 60

pages: 32-49

First Timers:

Dutch Craftsmen!page: 31

Special Feature

Full Potential of Core Drilling Yet to Be Tappedpages: 64-65

Positive Vibepages: 52-57

2 PDi • Issue 1 • February - March 2013 Issue 1 • February - March 2013 • PDi 3


NEWS

Special Features

Professional Demolition International Magazine

Address: P.O. Box 786, SE-191 27 Sollentuna, SWEDEN

Visitors address:Sjöängsvägen 7, SE-192 72 Sollentuna, SWEDEN

Phone: +46 8 631 90 70Telefax: +46 8 585 700 47E-mail: [email protected]: www.pdworld.comISSN Registration: ISSN 1650-979X

EDITORIAL STAFFEditor-in-ChiefJan Hermansson, [email protected]

Assisting Editor-in-ChiefAnita do Rocio Hermansson, [email protected] Europe: Mikael Karlsson, [email protected]

Editor North & South AmericaJim Parsons, [email protected]

Editor Demolition: Mark Anthony, [email protected]

Editor Recycling: Heikki Harri, [email protected]

Editor Asia Pacific: Barbara Grace, [email protected]

Editor Russia & Eastern EuropeAndrei Bushmarin, [email protected]

Editor AfricaKevin Mayhew, [email protected]

Graphic DesignerJay Bursky, [email protected]

SALES OFFICESInternational Sales DirectorGermany/Austria/Switzerland/Liechtenstein/BeneLux/Finland/France/Spain/PortugalAndrei BushmarinPhone: +7 921 949 27 81E-mail: [email protected]

Sweden, Norway & DenmarkContact the Editorial OfficePhone: +46 (0)8 631 90 70, Fax: +46 (0)8 585 700 47E-mail: [email protected]

ItalyMonica Colleoni & Romano Ferrario, Ediconsult Internazionale S.r.l.Via Savona 97, 20144 Milano, ItalyPhone: + 39 02 4771 0036, Fax: + 39 02 4771 1360E-mail: [email protected]

North & South America, UK & IrelandDarren DunayDunay AssociatesP.O. Box 119, Westwood, NJ 07675, USAPhone: +1 201 781 6133, Fax: +1 201 664 1829E-Mail: [email protected]

Australia/New Zealand/Asia Pacific/Korea/Japan and rest of the world:Contact PDi editorial office in Sweden.

PublisherJan HermanssonThe magazine PDI, Professional Demolition International is published five times per year with a worldwide circulation of 10000 copies. The annual airmail subscription rate is US$ 45. All subscription correspondance should be directed to: The subscription department, SCOP AB, P.O. Box 786, SE-191 27 Sollentuna, Sweden. PDI is mailed by second class postage. ©Copyright SCOP AB 2000-2012

Cover photo: Shanghai, © Dreamstime Inc.

CONTENTSPDi • issue no. 1-2013 Feb 13 - Mar 13 • Volume 13

REGULARS

PDi Magazine is a member of the following associations:

20-22 Bauma stimulates bucket development

52-57 Positive Vibe

60 What is new in GPR technology?

61 A quick look at Hilti’s Ps 1000 X-Scan GPR

64-65 Full potential of core drilling yet to be tapped

Editorials6 Pre Bauma vs Post Bauma

Becoming More Productive

8 Identification of Waste

Business8 Reijo Karppinen business manager of the year Exhibitors pleased with high quality visitors at bC India

Volvo CE rounds off reasonable year

10 Sima UK and Ireland online shop

Atlas Copco’s App for iPad and iPhone

Deutz strengthens Board

12 Hilti wins design awards

Metso strengthens in China

Allu: certified partner

Ramtec in the Middle East

13 Bauma Africa expands

New dates for Samoter

Smico/Symons appoints new vice president

General Equipment Co. appoints European Sales Manager

14 KPI-JCI and Astec Mobile Screens expands team Hilti growth in a difficult environment

Kolberg-Pioneer a ‘Patriotic Employer’

Germany held its ground in 2012

15 Volvo CE appoints external communications director

20 Ashine success at WOC Weka expands SR Drilling Machines

Reports58-59 Foreign brands grow in popularity in China

32-35 Trevi Benne’s Amazing Journey

42-45 The Home of Diamond Wires

46-48 Chinas Brightest Chining star

62-63 From dust biters to dust beaters

Shows24-29 World of Concrete

32-50 “Prost for Bauma”: the global construction industry’s mega show

First Timers31 Dutch Craftsmen

16 New Subsea Shear operates at 3,000m

Bobcat offers non-DPF Tier 4 engine

Baier goes to the wall

Libera, an industrial high pressure washer

Two smart ways to fight dust pollution

Chukar Waterjet at OCT2013

18 New MB-S10 screening bucket

HTC’s new 100% dry stone floor grinding system

Wacker Neuson on the path to growth in Asia

New Bobcat skid-steer loaders

62 Ashine Success at WOC

Weka expands SR Drilling Machines

Open Column10 The industry must work together

12 Breaking out new training course

14 Networking for water jetting specialists Site Report63 The Dutch replace history in Azerbaijan

High-performance dust suppression for Midwest demolition firm

66 Keltbray uncovers history in London

Cleaning the sands...in time

4 PDi • Issue 1 • February - March 2013


2013 is not a normal year. It is Bauma. It does not matter if it is recession or upturn in the economy. It is Bauma year and that makes the compass go crazy. Several of the European markets are still struggling, Asia is slowly picking up on some markets and so is partly the North American construction market, South America is still looking really good, particularly Brazil and Chile. On the construction market in Europe it is maybe not good, but not as bad as the estimations at the end of 2012.

Several suppliers witness sales have exceeded expectations in January and February and new construction projects are running and also starting. Berlin in Germany is a good example of that. Several large demolition projects are going on throughout the city. The German Demolition Association recently held a meeting of over 700 participants and 600 member companies. The Berlin meeting was organised by its founder Dr Dietmar Korth in co-operation with the German Demolition Association. There were a number of interesting presentations and this was staged along with a conference and exhibition, which included 78 suppliers to the German demolition and recycling industry. A full report will be published in the next issue of PDi, which will also be the Bauma show issue. The conference portrayed an air of optimism with the demolition and recycling industry fully active despite the difficult business climate in Europe.

The first quarter of the year has in general been very hectic judging by the exhibitions, conferences and other meetings that have taken place. A number of manufacturers have provided a glimpse of some of the products that will be launched at Bauma, creating a positive impact in the market. But as I have also been involved in the construction and demolition industries for many years I cannot avoid warning of the post Bauma effect. What will happen after Bauma and during the autumn? Bauma does not create more construction projects that is for sure. But it can encourage contractors to invest in new machinery and loosen buying restrictions for a while. But when every thing is back to normal again reality is also back. Who knows what way the construction industry will take this year. But what we do know though is that there will be many new products displayed at Bauma that will make contractors’ daily work much easier.

However, there is more to life than business and our daily profession. During the last couple of months I have been aware of that more then ever as my father past away after a rather long illness. When you lose someone that has been very close to you things that are related to your profession and working life are seen in a different light. Everything almost comes to a halt. In my case I have been wondering if I am concentrating on the right priorities. I think I am on the right path in my life and so believed also my father, I am sure of that. But in most people’s life today, life is constantly rushing forward at a very high speed with little time for reflection. It is more apparent when something suddenly happens that changes the direction. It is often sad things that make this change. We are forced to tackle the very basic principle of life itself. Maybe that is something we should do more often and not

only when life forces us. My father was 83 years of age and I am very grateful that I had the privilege to know him so well and spend our journey through life together. He was always a valuable supporter of our magazines and happy to get each issue of PDi Magazine even though he did not speak any English.

Jan HermanssonEditor-in-Chief

[email protected]

The International Association of Concrete

Drillers and Sawers represents international

sawing and drilling companies. In some

countries these companies can even be

considered as an industry, as they are

different enough from other activities and

companies.

But sawing and drilling cannot be

considered a regular industry, as the activity

of our specialized contractors has many

ups and downs, as does the construction

industry as well.

For several years, a permanent topic

for conversation within this young industry

has been to look for other activities, which

could be a complement, so our companies

may have other options to keep working

when concrete cutting is down. Many

options have being analysed, and some

of them are starting to be implemented

in various ways across the world, such as

ground penetrating radar, floor grinding,

and remotely controlled demolition with

robots or similar equipment.

As most of them are related to the

construction industry, and this whole area is

suffering intensely from difficult economic

situation, especially in Europe, the question

is not just what other activities your com-

pany can do, but mainly how you become

more productive with the resources you

have, to keep on going.

There are many things to do, inside a

company, to increase productivity, but one

of the most important would be to have the

right people. Again, we are working within

the construction industry, and this is easier

to say then it is to do.

But reality is threatening the survival of

companies, and they will only last if they

are able to adapt quickly to the changes.

So, if you want to be able to perform more

activities other than concrete cutting and

become more productive with the staff you

have, the solution goes through training for

everyone at the company.

Probably that training will not always

be classroom style, even though in some

cases it is necessary. It will probably be

a mix of practical training, reorganising

processes within the company, simplifying

tools or machines, or the other way around.

To explain it on a graphical way,

becoming more productive through train-

ing is like upgrading the whole company.

As a friend from the industry usually says

that with the new economic situation

larger vehicles are needed to carry more

equipment. This way, the same team of

two, three, four people can do much more

with the same customer.

Training should start from the top, from

the owner of the company or management

team. IACDS has organised a technical

seminar for 19 April at Bauma, with the

key topic ‘Working on the future of your

company’.

Best regards,

Jose BlancoPresident IACDS

www.iacds.org

Words from the IACDS President

Foto: Jonathan Alonso.Photo: Vito Gogola.

Pre Bauma vs Post Bauma

Bauma does not create more construction projects that is for sure. But it can encourage contractors to invest in new machinery and loosen buying restrictions for a while. Becoming

moreproductive


Exhibitors pleased with high quality visitors at bC IndiaMore than 28,000 visitors attended the bC India show, which took place at the Bandra Kurla Complex in Mumbai in February. There were 710 exhibitors from 33 countries, including 437 international exhibitors. The show covering 150,000m2 featured nine national pavilions including ones from China and France,

“Visitor numbers are satisfying and hope that the success of bC India indicates a return to growth in the Indian construction market,” said Show organising chief executive officer Thomas Löffler.

The high quality of the visitors as well as the organisation was highly appreciated by the exhibitors. “bC India is a very good show with high-quality visitors. Visibility here is extremely good. It is clean, tidy, well set-up and very well managed,” said JCB vice president marketing and business development Amit Gossain.

Peri managing director Alexander Schwoerer said that they had very high-calibre visitors from

Volvo CE roundsoff reasonable year Volvo Construction Equipment reported that net sales for 2012 remained at the same level as the previous year, despite a dramatic drop in global demand in the second half. The company also reinforced its position as market leader in the Chinese wheel loader and excavator segment, extending its share in 2012 to 15%.

The company also produced its second best ever output, selling 78,491 machines during the year. For the full year 2012, Vol-vo CE’s sales increased by less than 1% to SEK63,558M (€7,514M) compared to SEK63,500M (€7,505M) in 2011. Operating income reduced during the year to SEK5,773M (€682M), down from SEK6,812M (€805M) in the preceding year. Operating margin was also affected, retreating to 9.1% in 2012 from 10.7% in 2011, as was the value of the order book, which on 31 December was 36% lower than a year earlier.

“Taken as a whole 2012 was a reasonable year,” said Volvo CE president Pat Olney. “We sold over 78,000 machines, recorded the company’s second highest ever revenues and our proactive downturn management helped protect cash flow and profitability. We recognized the turn in the industry early, and the work undertaken to reduce pipeline inventories was successful. Stock levels have been reduced by around 30% since late spring and are now in balance with current demand.”

The prospects for 2013 are expected to remain subdued, with unit sales in Europe predicted to decline by 5-15%, while Asia, ex-cluding China, is forecast to decline by between 0-10%. Meanwhile, China, North America and South America and other markets are all forecast to operate in the range of plus or minus 5%.

www.volvoce.com

Reijo Karppinen business manager of the yearThe Future of Entrepreneurship seminar has

awarded its Business Manager of the year to

Dynaset Oy managing director Reijo Karppinen.

Dynaset based in Ylöjärvi, Finland, is one of

the world’s leading manufacturers of hydraulic

equipment. With increasing international op-

erations, the company has reached record-high

profitability figures for years. The company’s net

sales for 2011 totalled €13.1M, with exports

accounting for 75% to over 50 countries.

The seminar jury said that Dynaset, led

by Reijo Karppinen, is an innovative hydraulics

pioneer that has created its own products. The

company is successful thanks to its motivated

and committed employees, with emphasis be-

ing put on their wellbeing and work satisfaction.

Karppinen is a man with powerful entrepreneurial

spirit, and his long-term and visionary manage-

ment style has brought the company success

during its 26 years of existence.www.dynaset.com

all over India and bC India was a great industry platform supporting JCB’s growth in India.

www.bcindia.com

HTC Sweden AB

Postadress: Box 69, 614 22 Söderköping

Besöks-/godsadress: Klevvägen 7

614 92 Söderköping

Telefon: 0121-294 00. Fax: 0121-152 12

E-mail: [email protected]

* Kampanjvillkor: Gäller vid köp till 2012 års listpris. Kan ej kombineras med andra rabatter och gäller endast kunder i sverige. Inbytesmaskin ska lämnas hos HTC i Söderköping. Kampanjen är giltig t.o.m 31/12-2012. Max 50 st per kund. Samtliga priser är exklusive moms och frakt.

www.htc-fl oorsystems.com

THE MARKET LEADERDIAMOND TOOLSFLOOR GRINDING MACHINESFLOOR SOLUTIONS

Visit us at Bauma Munich, GermanyApril 15-21, 2013 Stand no inside: A1.319 Outside: Hof A 1-2.12

PDi_1_2013.indd 1 3/12/13 9:01 AM

Identificationof WasteSlowly, very slowly, the movement towards green acting demanded by society is finally connecting to reality. The demolition industry has a key role in the recyclability of building and structures. Demolition experts can do a selective process segregating the waste materials. The demolition industry is able to demolish and segregate materials on small fractions of different materials, being as selective as possible.

In most of the cases, the demolition industry can get to levels of recyclability of 95-99%. In some cases, selective demolition and posterior recycling of materials is directly awarded by generating economic results, as is the case with scrap, or can even be required by legal regulations for some materials. But we must not forget an important detail, selective demolition requires more time, more resources and this generally means more cost to the owner of the site.

A key topic, identification of waste, is becoming critical for the EU and is being addressed in the member countries. The Waste Framework Directive (WFD) was a great effort to set common ground on waste and adapted to the national legislation of the member countries. But the challenge for society is the proper handling of waste from the very beginning of the chain and even though the WFD gives some general ideas, it is not clear who should do the identification of waste prior to any other activity and how it should be done.

Coming closer to our business, there are different approaches in Europe to tackle this issue within the demolition industry. On one hand, Germany was the first country to have a standard for the research, identification and quantification of waste of sites, prior to demolition, to be done by an external expert. This has a few advantages, but also disadvantages. On the other hand, the UK’s National Federation of Demolition Contractors is creating a system to identify, segregate and recycle to the best, with a simple, effective system, which will allow for selective demolition as desired by the owner and required by law. This option also has advantages and disadvantages.

They are just two samples of the different options being proposed by the European Demolition Association to address this issue. The EU itself is willing to move forward on this issue with procedures and regulations to apply in all the member countries,

in order to be able to fulfil the goal of 100% recyclability for construction and demolition waste.

There will be a conference in Paris on 23 and 24 May titled ‘Cradle to Cradle’ to tackle this issue and how to solve it.www.europeandemoliton.org

EDAEDA

Giuseppe PanseriPresident

European Demolition Association

OR



The Industry Must Work Together

For close to a decade PDi has in each issue published columns from the different branch associations in our industries. For the key persons within the associations it is quite a challange to have something new to say in each issue of PDi. That is why we would like to try something different now where we welcome anyone to contribute under the title “Open Column”. There are no limitations of columns or subjects and the word is free. You will for sure receive message for the branch association too but not in every issue. In this issue’s column, Julie White, the managing director of D-Drill challenges the industry to work together in order for all to succeed.

A leading UK business figure fears 2013 could see the construction industry bumping along the bottom, unless the promise of investment in infrastructure is delivered.

Julie White, the managing director of D-Drill, a specialist in diamond drilling, concrete sawing and demolition, said that action rather than words is now required. She has also called for fellow construction companies to work together in a bid to get the sector growing again.

“Everyone in our industry applauded the Autumn Statement’s commitment to infrastructure spending but we need to see it happen as early as possible,” said White. “Of course, that investment will filter out to companies in the supply chain but I don’t want to get to this time next year and be saying the same things over and over again. I want action not words.

“We need to get Britain building if the construction industry is going to be lifted out of the recession it has been suffering for many years now. It’s vital that money is directed to shovel ready projects rather than talking about projects, which are some

way off in the future.“D-Drill is very busy and we

have diversified into other areas of operation to ensure we maintain the growth we want to achieve as a company. But the construction industry has to work together throughout the supply chain and help one another. It’s no good our suppliers hiking prices because our clients want jobs done for less, not more. If everyone continues to squeeze in that way, we are only going to cause irreparable damage to our industry. We all have to make a margin and we all understand that we have to work harder and harder to achieve that but, equally, we all have to be realistic with one another.

“I believe 2013 could see an improvement, but it’s vital that the money earmarked for infrastructure is pumped into projects that are ready to go and provides a boost for our industry and, on top of that, our industry has to work together.”

Julie WhiteManaging Director

D-Drill Groupwww.d-drill.co.uk

Sima UK and Ireland online shopThe Spanish company Sima has chosen the UK and Ireland to launch its first business to con-sumer online shop because the company believes the UK is the most advanced country in Europe for buying online. Advertising will be carried out online through search engines and search engine optimisation campaigns, the launch of www.simasa.co.uk will only require minor investment. This is in addition to its current website aimed at suppliers and distributors.

Sima sees this launch as a further step forward in its international expansion process. “In the past, we have always sold online to leasing companies or distributors and never to the end user but we expect this tool to be a success,” said Sima financial director Antonio Muñoz. “The online client can jump from site to site with the click of a mouse and customer loyalty is low in comparison with offline clients.”

Despite the potential difficulties, outstanding advantages of this tool include the convenience of buying online and, even more importantly, the price. Customers can save up to 50% on

the price of the machine by dealing directly with the manufacturer, thereby saving costs added by dealers. Users can therefore buy products specifically adapted to the British market at lower prices, including the range of masonry and rebar cutters, power trowels and consumables. In ad-dition, these products can be repaired in the UK should the need arise, thanks to the after-sales service facility to be opened by Sima.

Another advantage comes in the form of fast delivery times of between three and five days using operators such as DHL and TNT. Orders will be dispatched from Granada as well as the recently inaugurated Nuremburg logistics centre.

If the project meets expectations, Sima estimates a sales volume of between €100,000 and €120,000 in the first year. Once the site is in operation it will be necessary to see how many visits it obtains, correct possible errors and look at how deliveries work, in order to draw up more precise forecasts. “If the results are good, our aim is to study the possibility of doing the same thing in other countries, such as the US, for instance. We therefore see this as a test platform for other markets,” said Muñoz.

www.simasa.com

Atlas Copco’s App for iPad and iPhoneOn 14 February Atlas Copco launched world-wide its first customer magazine App for iPad and iPhone platforms to complement its Build magazine. The free App in English will be available through the App Store. The App will add value to its Build magazine through videos, useful links, campaigns, product information and more. “The idea is to have a state-of-the-art two way commu-nication with our customers and readers across the world, providing them valuable information and interaction and strengthen our relations” said President of Atlas Copco Construction Technique business area president Nico Delvaux.

www.atlascopco.com

Deutz strengthens BoardMichael Wellenzohn took on the newly created

position of chief sales and marketing officer at

Deutz on 1 March. He brings extensive knowl-

edge of the international sector from various

markets, including China, Japan, and North and

South America.

Most recently he was the head of sales at

ThyssenKrupp Chassis, where he was responsible

for sales of approximately €3bn. In the past eigh-

teen years, Wellenzohn played an instrumental

role in the development of the steering systems

product area to a leading position.www.deutz.com



Ramtec in the Middle EastSalamah Group will distribute the Robi hydraulic

attachments range in the United Arab Emirates

with a view to expanding in the wider Gulf Coop-

eration Council region.

The range of products, including breakers,

crushers, grapples and screening buckets, is

produced by Finnish company Ramtec for use

in demolition projects, screening and recycling

construction waste on-site. Ramtec was formed

in the1970’s and founded the Rammer brand in

1978, before becoming part of Sandvik Mining

and Construction. Its factory, built in 1996, was

sold to Ramatec in 2002.

“Salamah started 2013 with the strategic alli-

ance with Ramtec,” said group managing director

Sherif Selim. “This cooperation will introduce high

Hilti wins design awardsHilti has won a number awards for innovative products at the ‘iF product design award’ and ‘Good Design Award’ competitions.

An international jury of design specialists chose the world’s first cordless combihammer and the new hollow drill bits, which allow dust to be extracted from the hole while drilling is in progress, as worthy candidates for awards. They also acknowledged the design quality of a Hilti cordless rotary hammer, two diamond core drilling machines and two cordless electric dispensers for injectable adhesive anchor mortar. The products were judged according to degree of innovation, safety and functionality as well as design and er-gonomic criteria. A total of about 4,500 products from more than 50 countries were entered for this year’s ‘iF product design awards.’

www.hilti.com

Metso strengthens in ChinaMetso is continuing to strengthen its presence in China by acquiring a manganese steel foundry JX in Quzhou City, Zheijang Province some 400km Southwest of Shanghai. The acquisition will improve Metso’s capabilities to supply wear parts to mining and construction industry customers in China and other markets in Asia Pacific.

“The acquisitions of JX and Shaorui Heavy Industries and the joint venture with LiuGong Group Corporation announced last November, significantly strengthens our supply capabilities for mining and construction industries in China,” said Metso mining and construction president Andrew Benko. “Metso now has a complete range of capital equipment and wear parts covering a wide range of customer requirements. By acquir-ing a new steel foundry in China we are able to better serve the needs of our Chinese customers.”

www.metso.com

Bauma Africa expandsBauma Africa is continuing to expand and instead of the originally planned 200 exhibitors, the premiere of the show to be held on 18 to 21 September 2013, is now expecting to host around 400 exhibitors. The resulting increase in demand for exhibition space means the event is now being expanded again, by another 15,000m2 to 50,000m2.

Major players like Atlas Copco, Bauer, Bell, ELB Equipment, Goscor Group, Herrenknecht, Hyundai, LiuGong, Pilot Crushtec, Putzmeister, Sany, Shantui, Sumitomo, Terex Finlay, Vermeer, Wacker Neuson, Wirtgen and XCMG are already signed up for the first edition of Bauma Africa taking place in the Gallagher Convention Centre, Midrand Johannesburg, South Africa.

Also very satisfactory is the high level of interest from abroad. In total there will be nine country pavilions at the show from Austria, China, Finland, Germany, Great Britain, Italy, Korea, Northern Ireland and Spain.

www.bauma-africa.com

Allu:certified partnerAllu Finland invests in quality management, environmental management and occupational health and safety management. During the years company’s functions were developed further so that Allu was granted certificates of Environ-mental Management System and Occupational Health and Safety Management System. Allu has had the certificate for Quality Management System for a long time already.

Allu has had the certificate for Quality Management System (ISO 9001:2008) for

several years. Along with that, certificates for Environmental Management System (ISO 14001:2004) and Occupational Health and Safety Management System (OHSAS 18001:2007) are also granted. Generally speaking this means that the company fulfills the requirements of these international recognised standards.

Concerning the Quality Management System Allu has committed itself in continuous development of its operations. Markets are becoming increasingly demanding and Qual-ity Management provides better chances to respond to the customer expectations and demands. Focusing on the customer has always been one of the main principals in Allu’s operations.

Customers are also increasingly concerned with the environmental impact of the products and services they consume. Companies are expected to demonstrate their commitment to reducing the environmental impact of daily operations. This challenging task gives Allu the opportunity to show its responsibility towards society and stand out from the competitors. ISO 14001:2004 certificate creates strong base in succeeding in that task.

Appropriate occupational health and safety systems are important for employees but also to customers. Occupational Health and Safety Management System certificate (OHSAS 18001:2007) states Allu’s thorough commitment in securing its employees’ health and safety. Healthy employees are a benefit to the company and to the customer.

www.allu.net

General Equipment Company appoints European sales managerIn the US General Equipment Company has appointed Pieter Jansen as European sales manager. Jansen will be responsible for the development and coordination of sales and marketing activities for GEC throughout Europe.

Jansen has over 32 years of experience in the construction and equipment rental markets. His focus aligns well with General Equipment’s core product lines, which include light construc-tion and rental equipment.

“Pieter will be a major asset as we look to increase our presence in Europe,” said GEC president Dennis Von Ruden. “We’re dedicated to hiring the highest level of talent, and his ex-perience will be key to introducing our quality products to new markets.”

www.generalequip.com

New dates for SamoterThe International triennial earth moving and build-

ing machinery exhibition Samoter is expanding

its trade offering. The next and 29th addition of

Samoter will be held 8 to 11 May 2014 and will

be joined by Asphaltica, focusing on the asphalt

industry, equipment, technologies and road safety.

Asphaltica will be linked to Samoter thanks to

the collaboration with Siteb, the Italian association

for road works and road infrastructures, represent-

ing about 300 member companies involved with

road design, construction, maintenance and control.

The last edition of Samoter in 2011 was

attended by more than 900 exhibitors and over

98,000 visitors from 110 countries. The continu-

ing economic crisis in Europe and Veronafiere’s

policy of establishing strong, strategic roots in

geo-economic regions enjoying high growth,

open new scenarios for 2014 that encompass

the Balkans, Eastern Europe, the Arabian Penin-

sula, the Mediterranean area, Central Asia, the

Far East and Latin America.

www.samoter.com

Smico/Symons appoints new vice presidentIn the US Smico/Symons Screens has appointed Alan Odgers to the position of vice president of the Oklahoma City based manufacturer, which specialises in screening and associated equip-ment for several industries. Odgers has had a variety of management roles since starting his career with Charles Machine Works in 1987. “I decided to join Smico/Symons because it is a unique opportunity to work with an established leader in the screening industry,” said Odgers. “My industry experience and wide range of responsi-bilities over several years will help drive continued growth domestically and internationally.”

www.smico.com

quality attachments to help heavy equipment and construction companies optimise the utilisation of their equipment in a safer, more economical and efficient sustainable way.”

One use of the Robi range is to make it easier for contractors to recycle on site, taking advantage of the trend in the Middle East towards recycling. “Recycling is a new trend of sustainable development. By separating steel from concrete both steel and crushed concrete can be utilised. Then extra transportation of material can be avoided,” said Ramtec vice president sales and marketing Benjami Pitkäsalo.

www.salamahgroup.comwww.ramtec.fi

ICS | Blount Inc. · 4909 SE International Way Portland, OR 97222 USA · 800.321.1240

© 2013 ICS | Blount Inc. All rights reserved. Pricing subject to change without notice.

icsbestway.com

Performance is in the Details ProFORCE®. The new, full line of American madeprofessional diamond blades and core bits from ICS. Engineered to the highest possible standards for production sawing and drilling.

Contact your ICS sales representative or call 1.800.321.1240 to learn more.

PERFORMANCE AND QUALITYTHAT PROFESSIONALS COUNT ON

Breaking Out New Training CourseIt has been a busy few months for me as I have been working away in the background to develop a new training course aimed specifically at owners and operators of hydraulic hammers.

Built around the Rammer operator training manual and backed by the Finnish hydraulic hammer giant, the new course has been developed to ensure the safety of operators and operatives whilst gaining maximum productivity and working life from the breakers, together with reduced owning and operating costs.

Operator misuse, abuse and neglect are universally accepted to be the single biggest cause of hydraulic hammer failure within the demolition sector. Our training course is designed to overcome that problem by demonstrating best operating and maintenance practice to ensure that the operator is safe, that the breaker performs to optimum levels, and that wear, tear and failure are minimised.

Some of the course content is based upon known principles and working methods and is designed to reinforce best practice. Trying to break off too much material, levering the material with the tool, or hammering in the same position for a prolonged period will all impact upon the life expectancy of both the breaker and the tool. The training course will show operators how to approach specific tasks, while covering items such as breaker and carrier matching, hammer, carrier and hydraulic hose checks, pre-start site checks, correct greasing procedures and general hammer care.

Although the training course is based upon the Rammer training manual, the course is open to companies running any breaker brand and is not limited purely to demolition applications. Regardless of manufacturer or specific application, the challenges of optimum safety, productivity and reliability remain the same. By learning correct procedures, it is possible to increase hammer productivity and extend the life of the hammer and the tool substantially. With so many demolition sites, mines, quarries and recycling operations reliant upon a hydraulic hammer, a small investment in operator training can have huge benefits.

The new breaker training course is offered through C&D Consultancy: www.demolitiontraining.co.uk

John WoodwardManaging Director

C&D Consultancy

There has been a need in the industry for a new training course aimed specifically at owners and operators of hydraulic hammers. That course has now become available. John Woodward provides details.



KPI-JCI and Astec Mobile Screens expands marketing teamKPI-JCI and Astec Mobile Screens has appointed Mike Caldwell regional sales manager for the western United States. Caldwell will cover Ari-zona, New Mexico, Oregon, Washington, Alaska and Hawaii and will sell crushing and screening equipment. Most recently, he worked as a branch manager for Goodfellow Corporation, a KPI-JCI and Astec Mobile Screens dealer.

“We are very excited for Mike Caldwell to join the KPI-JCI and Astec Mobile Screens sales team,” said sales and marketing vice president Mike Johnson. “Mike is an enthusiastic and experienced professional, and we are confident he will thrive with his new responsibilities.” Mike Caldwell can be reached by e-mail at [email protected].

www.kolbergpioneer.comwww.astecindustries.com

Kolberg-Pioneer a ‘Patriotic Employer’ In the US Kolberg-Pioneer has been recognized as a ‘Patriotic Employer’ for its support of employee participation in America’s National Guard and Reserve Force. The South Dakota Employer Support of the Guard and Reserve organisation honoured the company, along with maintenance supervisor Randy Blunck, for its contributions to America’s national security and protection of liberty and freedom. This is the third time Kolberg-Pioneer has been recognised as a Patriotic Employer by the South Dakota ESGR.

www.kolbergpioneer.com

Volvo CE appoints external comm directorVolvo Construction Equipment has appointed Thorsten Poszwa as global director of external communications. Based at the company’s Brussels headquarters, the role encompasses print and online media relations for the business, as well as developing worldwide external com-munication standards and practices for Volvo CE. Poszwa will also take responsibility for the company’s customer magazine, Spirit, as its new editor-in-chief. He will take up his new position in May and will be based in Brussels, Belgium.

This appointment comes after10 years Poszwa joined Volvo CE’s German sales organi-zation. He has spent much of the last decade in a range of marketing and communication roles based in Germany, notably in the organisation of Volvo’s presence at the Bauma exhibition. In his most recent role Poszwa has been manager of marketing and communications for Volvo Con-struction Equipment Germany, based in Ismaning, near Munich.

“After a decade promoting Volvo CE’s products and services in Europe’s largest market, now is a thrilling time to take on a more global role,” said Poszwa. “With the Volvo CE brands more respected than ever before I am excited and proud at the prospect of continuing the longstanding and successful two-way dialogue with our customers, via a range of traditional and new media channels. It will be my job to continue Volvo’s role as a thought leader in the industry and effectively communicate both Volvo’s technical innovations and its core values of quality, safety and environmental care.”

www.volvoce.com

Germany held its ground in 2012In 2012, the German construction equipment and building material machinery industry generated €12.5bn in turnover. Construction equipment made €7.9bn of this sum while €4.6bn were made with building material, glass and ceramics machinery. This is a nominal decrease of around 1% compared to 2011. After having seen an upturn following the 2009 economic and finan-cial crises, the industry is now moving sideways on this decent level it managed to also achieve again in 2012. Starting the Bauma year with confi-dence, but no peaks expected for 2013

“Although, on the whole, times are difficult, last year was a good year for our industry,” said the industry association chairman Johann Sailer. According to Sailer 2013 will not see any peaks either. However, companies belonging to the industry are currently full of confidence in light of Bauma. “This event, which takes place every three years, has always inspired new business opportunities. It also is the number one indicator for upcoming market trends,” said Sailer. Taking a look at this year’s figures, though, the first couple of weeks have been rather low. The number of orders, which came in the fourth quarter of 2012, does not yet indicate any growth either. An increase in demand is most likely to be seen in the second half of this, so that the good level of the previous year should also be reached in 2013. No company can do without China

It is very important to watch the situation in China, as its development will be of great influ-ence and impact. In 2012, the domestic market in construction machinery saw a decline of 30%.

Hilti growth in a difficult environmentThe Hilti Group increased sales by 4.4% in local

currencies in the 2012 business year. Sales rose

5.2% year-on-year, to CHF4,204M (€3,397M).

Although important Hilti markets remained mired

in a difficult economic situation the Hilti Group

stayed on a course of growth in 2012. The 5.2%

increase in sales corresponded to expectations.

In terms of Hilti’s sales regions the picture

is largely unchanged. While sales increased in

Central and Northern Europe the trend in South-

ern Europe remained negative. Overall, sales in

Europe declined by 1.9% in local currencies. The

weakness in Europe was compensated for by

improvement in the other regions. Latin America

continued to show strong growth up 32.4% while

sales rose significantly in North America, advanc-

ing 13.4%. Sales in the Eastern Europe/Middle

East/Africa and Asia/Pacific regions also grew

substantially, rising 8.9% and 9.5% respectively.

“We achieved good results in light of a mar-

ket environment that failed to improve,” said Hilti

chief executive officer Bo Risberg. “Compared

to the previous year the growth rates eased

somewhat as the year progressed. This was due

to the ongoing negative trend in Europe and to the higher sales levels prevalent over the second half of 2011.”

www.hilti.com

According to the Off-Highway-Research organ-isation, in 2012 mobile construction machinery worth US$100bn (€75bn) was sold worldwide. Nearly US$30bn (€22bn) of these were sold in the Chinese market alone, nearly US$22bn (€16bn) in North America and only US$12bn (€9bn) in Europe. As with the automotive industry, China has become an important factor for the production and sales of construction machinery. At the moment, the country is facing financing problems and surplus capacities on its domestic market. Experts believe China will overcome this situation within the next 18 months. In the long run, this country will be and remain the top market for construction machinery again. Growth in non-traditional markets

The future looks less bright for the construc-tion equipment and building material machinery industry than in the past. The discrepancy between the markets in Northern and Southern Europe keeps getting bigger. It is impossible to predict if and when the construction industries of Spain, Portugal and Greece will finally pick up again. Germany has been and probably will remain stable. It seems most likely that growth will be generated in less traditional markets, which many suppliers might not really have been considering. In countries such as Indonesia, Myanmar, some states of Southern Africa or even Mongolia there are lots of raw materials ready to be extracted and those countries’ requirements in improving their infrastructure are enormous.Spotlight on Indonesia

The industry is putting a spotlight on Indonesia by making it the partner country of this year’s Bauma. For many years there have been regular meetings and visits taking place between govern-ment departments and associations of Indonesia, Messe München, VDMA and its member compa-nies. This year’s Bauma offers the opportunity to deepen these relationships. ”We would like to try and convince Indonesian decision makers to invest into the right technology and modern standards,” said Sailer. Bauma is the ideal platform to do so. It is only here that investors can gain a comprehensive and full overview of the current state of technology and see for themselves the kind of construction equipment, building material and mining machinery which is on offer. Indonesia’s economy in a good position

Indonesia’s economic data is impressive. It has a gross domestic product of US$840bn (€627bn) in 2011, the third quickest growing economy of Asia and one of the 20 largest national economies in the world. In 2011, the Indonesian economy grew by 6.5% and for 2012 growth of nearly 7% is expected. The construction industry represents 10.2%t of the country’s economic strength and is therefore the fifth most important sector of the country. Sales of construction machinery grew significantly over the past couple of years. In 2007 nearly 7,500 heavy earth-moving machines were sold, while 2011 saw a demand of 20,000 units. Mid-term, also the raw material sector will call for big investments. By 2025, the country will have been implementing its so-called ‘Master Plan for

the Acceleration and Expansion of the Economic Development’. A budget of nearly US$400bn (€298bn) is allocated to this plan, with nearly half of this sum to be invested in infrastructure projects. In total, the government identified 21 priority projects worth US$33.4bn (€25bn), including the construction of toll roads, bridges, harbours or water industry facilities, among other things. The demand of building material is also constantly increasing. According to its government, Indonesia required about 48.4Mt of cement, 13.3Mt of steel and 1.3Mt of asphalt concrete in 2012, showing an upward trend for the future.

Networking for Water Jetting Specialists There are a wide range of applications for water jetting systems, as they can be used in multiple industries with different purposes. These applications generally start with cleaning of surfaces or supports, and other tasks related with maintenance of industries. From there, and depending on the purpose we can find many other uses for water jetting systems, removal of coatings, rust, paints, surface preparation, hydrodemolition, roughening and cutting,

With the right combination of flow, pressure and knowledge, many tasks can be done using water as a tool. These applications are being developed together by specialist contractors and manufacturers, working in the field for many years.

Even more, in some countries there are already associations of companies specialised in water jetting, usually with concentration on two major topics, industrial cleaning and applications for the construction industry. But there is no communication channel between all of these specialists across Europe, to share expertise and common problems, or to act on behalf of this industry towards the European Union.

In order to meet new contacts working in this industry, generate a network of European specialists and study the possible creation of a European Water Jetting Institute, there will be a free to participate networking activity at Bauma. This activity was instigated by the Spanish Water Jetting association (AETAC) and is open to all professionals related with the industry. It will be held at 10am on 17 April on the Hammelmann stand 419/518 in Hall A1. To register of receive more information contact the organisers at [email protected]

www.aetac.org


Two smart ways to fight dust pollutionThe Italian company DF Ecology, a division of the leading Italian construction equipment manufacturer Tower Light, has introduced the Smart Dustfighter and the Mini Dustfighter. The Smart Dustfighter is designed to provide outside workers with protection from many different kinds of airborne contaminates. The Smart Dustfighter produces a fine mist of water through a series of high-pressure jets and then propelled by a fan.

Similar in size to a mini concrete mixer, the Smart Dustfighter operates from ordinary mains power, 230V 50 Hz 2.2KW, with an 110V ver-sion available for UK construction sites. The wheel mounted Smart Dustfighter delivers a maximum coverage of up to 13m at 3.6 to 5.8litres/min and pressure of 2.5bar.

The Mini-Dustfighter has been developed to help give contractors safe protection from unpleasant odours and airborne contaminates whilst work-ing indoors. The Mini-Dustfighter operates from 230V mains power and delivers a maximum throw of up to 8m with a coverage of 83m2 from its integral 70litre water tank. The control panel is fitted with flexible settings, enabling the operator to finely adjust the Mini-Dustfighter to suit their individual applications. It weighs just 70kg and is fitted with wheels for easy transportation. A fully extended Mini-Dustfighter is 2.15m high and when lowered measures 710mm x 600mm x 1230mm.

“We produced these new Dustfighters fol-lowing requests from site workers that needed to combat dust pollution in a concentrated area when working inside and outdoors,” said DF Ecology representative Alessandro Rossi. “We believe that our range of Dustfighters will become essential items for contractors who need to maintain a healthy atmosphere when cutting slabs, block paving, bricks or carrying out projects that involves demolition.”

www.dfecology.it

Baier goes to the wallThe Baier six diamond disc channel cutter BDN 466/6 makes three working steps in one. There is no need to chisel after chasing and collect waste material. The BDN 466/6 eliminates this process and is three times more efficient with its 2.4kW motor, intelligent digital electronics and class leading dust collection efficiency. The BDN 466/6 is believed to be the world’s only six disc channel cutter. Now, the BDN 466/6 can even cut grooves in walls with no additional chiselling out of the remaining material.

Baier machines on average have a work-ing life of over 22 years and have the highest return of investment of any tool brand in the industry, the company claims. With a 0.3% warranty returns ratio it has become the brand of choice for industrial users and has a strong following worldwide.

In 1938 Maschinenfabrik Otto Baier began manufacturing power tools in Germany as Otto Baier was the inventor the world’s first percussion drill. Since then it has pioneered and become the world leader not only in the channel cutting technology.

www.baier-tools.com

New Subsea Shear operates at 3,000mIn the US Genesis Attachments has introduced its Subsea Shear to operate at a depth of 3,000m for offshore applications.

Available with 813mm or 1170mm jaw openings, the GSS can be used in harsh marine applications, including offshore platform decommissioning, pipeline and pile cutting, and underwater steel cutting. It can be hung from a cable and operated by a subsea power pack or from surface power.

“To design a shear capable of withstanding deep-depth pressure and corrosive salt water, we started with some of the key features of the Genesis XP Mobile Shear and then added offshore application specifics, such as Xylan anti-corrosion coated fasteners, zinc anodes and holes along the top and bottom of the shear body for easy water drainage,” said Genesis business development director David Palvere.www.genesisattachments.com

Bobcat offers non-DPF Tier 4 engineBobcat has announced a plan for Tier 4 solu-tions that includes a Doosan built engine added to some of its equipment for North America in 2014. Development of the new Tier 4-compli-ant engine was a collaboration between Bobcat, Doosan and some engineering consultants and engine design firms.

These new Tier 4 solutions combine Doo-san’s 50 years of engine building experience with Bobcat’s 50 years of compact equipment leadership. Together with the combined experi-ence of the other partners, adds up to more than 200 years of experience in engine design and development and compact equipment expertise.

The Doosan-built engine is a non-diesel particulate filter engine. Bobcat engineers have worked together with Doosan and the engi-neering consultants and engine design firms to develop these engines that offer non-DPF Tier 4 technology. With these additional engines, Bobcat will be a market leader in non-DPF Tier 4 technol-ogy. The company expects it will be welcomed by customers and dealers and will minimise long term Tier 4 parts and maintenance expenses.

The Doosan Company started building engines in 1958, and since then has developed engines across several industries for construction and industrial equipment, power plants, ships and automobiles. The new Tier 4 Doosan engines will be available in Bobcat machines in North America that meet Tier 4 horsepower requirement ranges in early 2014. Over the next 18 months, the company will release more details on the Bobcat

Libera, an industrial high pressure washerLibera is a pressure washer of the new line of cold water pressure washers from the Italian Idro-base Group. It has been designed for heavy-duty use, such as sandblasting. Its main components are a tubular frame set, an industrial pump set, a simplified electric panel and a motor-pump direct drive. It is available in three models, which have different pressure, 170, 250 or 300bar, different flow rate from 15 to 33litre/min and different power from 7.5 to 11kW.

www.idrobase.com

Chukar Waterjet at OTC2013In the US Chukar Waterjet, an industry leading

manufacturer and applications consultant for

subsea ultra-high pressure water jetting equip-

ment, is exhibiting its innovative deepwater

subsea waterjet system on Booth 546 at the

OTC2013 Offshore Technology Conference, 6

to 9 May in Houston, Texas.

Chukar Waterjet offers underwater water jet

cutting and blasting equipment capable of op-

erating at depths in excess of 3,000m. Effective

at cutting steel up to 250mm thick or water jet

blasting at pressures up to 3,800bar, Chukar’s

subsea water jetting equipment has numerous

applications for deepwater emergency response,

salvage and rapid de-mobilisation operations. It

can be used to blast away coatings and marine

growth to inspect welds, or as a cutting tool in

emergency response and salvage operations.

Water jetting equipment also may be used to

provide turbulence in a stream of methanol

for hydrate remediation, an application Chukar

developed in emergency response to the Gulf

oil spill, when the company was asked to rapidly

manufacture a system to clear a clogged contain-

ment system 1,500m underwater.

Water jet technology has numerous ad-

vantages over conventional subsea cutting and

cleaning tools. Unlike conventional tools, the tools

used in a water jet system cannot bind in the cut,

jeopardising asset integrity. Water jet cutting also

reduces the hazard of igniting trapped pockets

of gas during cutting.

www.chukarwaterjet.com

Tier 4 machines and their engines, along with additional features and solutions.

www.bobcat.comwww.doosan.com


At the Bauma China show in November, com-pact and light equipment manufacturer Wacker Neuson presented new products and a growth strategy for the Asian region. “The Asian markets becoming increasingly important for our group. We would like to grow here significantly in the coming years,” said Wacker Neuson SE chief executive officer Cem Peksaglam. “On the one hand, that will be realized through our new prod-uct range in the area of construction equipment, which we first introduced to a larger audience at Bauma China. We also see good market opportunities with our compact equipment.”

Wacker Neuson has been represented in Hong Kong with its own sales company for over 15 years and in the locations of Shanghai, Beijing and Shenzhen since 2006. More Asian Wacker Neuson sales companies outside of China are located in India, Malaysia, Thailand and Singapore. Wacker Neuson was able to

New MB-S10 screening bucketItalian company MB has added the new model MB-S10 Screening Bucket, designed to satisfy the demands of the company’s customers.

The new bucket will expand the wide range of MB Screening Buckets. Small, compact, light, the MB-S10 Screening Bucket is suitable for midi diggers from 4t to 8t and is ideal for use on small sites and for gardening work. The new MB-S10 weighs 445kg and has a capacity of 0.6m3. Developed using the same materials and the same technology as the other MB Screening Buckets, the MB-S10 is easy to transport, manoeuvrable and highly competitive.

The new product demonstrates the continu-ous commitment of the Vicenza based company to innovate and create work tools, which are adaptable and for basic use.

www.mbcrusher.com

HTC’s new 100% dry stone floor grinding systemHTC’s new Diamond Xpress is a slurry and chemical free grinding process for use on marble and terrazzo floors. Diamond Xpress reduces the number of grinding steps required to achieve the desired gloss. The grinding is performed completely without water.

The slurry that is normally formed during wet grinding in a conventional grinding process is a health and safety problem, as well as a major expense for contractors. Dry grinding of natural stone floors improves the work environment and reduces costs since slurry management disap-pears and grinding can be performed in half the time compared to conventional grinding.

The new technology also reduces chemi-cal consumption since the final gloss finish is much higher than in conventional grinding, the company claims. This provides additional savings for contractors and the end-users while being

environmentally friendly.www.htc-floorsystems.com/dx

New Bobcat skid-steer loadersBobcat has added four new skid-steer load-ers, the S630, S650, S770 and S850 to complement the existing S70 and S205 models. Improved operator comfort is a key feature of the new loaders and the most prominent aspect is the forward positioned cab that gives a claimed 30% increase in all-round visibility for the operator. There is optional cab pressurization, minimising entry of dirt and dust.

The machines come standard with ROPS and Level I FOPS. There is also a wide selection of tyres: HD, SD, poly-fill puncture proof and over-the-tyre steel tracks are available. These machines also have as standard auxiliary lines integrated into the boom for protection to comple-ment the bracket surrounding and providing protection for the hydraulic couplers. There are also a wide range of Bobcat attachments for use with these machines in demolition and many other industries.

www.bobcat.com

establish a leading market position in China with the gasoline demolition hammers. “In track construction, a high degree of reliability and ease of maintenance of construction equipment is very important. Our gasoline demolition ham-mers are unbeatable in terms of this decision criterion. This is why we have a leading market position in China in this area, which we will utilize for more products from our assortment in the future,” said Peksaglam.

In order to grow further, the group has developed its own series of construction equipment that is specifically tailored to the requirements of the Chinese market. The new series consists of compaction equipment, gen-erators, pumps and light masts. The products are ruggedly designed and meet the high Wacker Neuson quality requirements. “Our customers appreciate the long tradition of development and historical roots of Wacker Neuson that reach back to 1848. We have incorporated these many years of knowledge and our experi-ence into the new product range for the Asian

market and offer products with an outstanding price performance ratio,” said Wacker Neuson deputy chairman Martin Lehner.

The group sees additional potential with the introduction of a range of compact machines. “In the medium term, we also need to manufacture these products locally in order to be able to establish a competitive position in Asia. However, when and where we open a production site in China, is currently still undecided,” said Lehner.

Wacker Neuson manufactures at eight produc-tion sites around the world. In 1994, the first production site in the Asian region was opened in Manila in the Philippines. New construction equipment for the Asian market, among other things, is manufactured there. “Our group is fo-cused on growth. We see the greatest potential in Asia presently, but also in other emerging markets, such as in South America or in Africa. We already have our own distribution channels in many countries. Now it is up to us to position the products appropriately and market them successfully,” said Peksaglam.

www.wackerneuson.com

Wacker Neuson on the path to growth in Asia

The nominations for the Bauma Innovation Award 2013, which is being presented as part of Bauma, have been selected. The 15 nominated innovations were announced at the press conference held at the Bauma Media Dialog on 29 January 29 in Munich. The award is divided into five categories. Out of a total of 156 submissions, the jury selected three groundbreaking innovations for each category to go through to the final round.

The award ceremony will be held on 14 April in the Allerheiligen-Hofkirche (Court Church of All Saints) in the Residenz Palace in Munich. Most of the new developments will also be on show during the Bauma exhibition.

Category: MachineryRevolution in underground mining - the Mobile Tunnel Miner,

Aker Wirth. Erkelenz Pipe Express, a new semi-trenchless method for

installing pipelines, Herrenknecht, Schwanau.JFI Method: Fully automated production of multi-layer con-

crete elements, Sommer Anlagentechnik, Altheim.

Category: Machinery componentsTablet PC - transferring the digital workplace to the construc-

tion machine, Bauer Maschinen, Schrobenhausen.

Nominees for the Bauma Innovation Award 2013

Fume Extraction System, Volvo Con-struction Equipment, London.

AutoPilot Field Rover - 3D system for controlling offset slipform pavers, Wirtgen, Windhagen.

Category: Construction process/ Construction work

Monopile foundation for tidal engine turbine - offshore site in Scot-land, Bauer Spezialtiefbau.

Using revolving tower cranes to erect hybrid-energy wind towers - in a fast construction time,

Max Bogl Bauunternehmung Sengenthal.“PAST”: reliable, automated road-building - improved function

along the whole building process chain, Hermann Kirchner Bauunternehmung

Category: ResearchOnline grain size analyzer, Technical University of Clausthal.Parallel kinematics for working equipment on mobile machin-

ery, Technical University of Dresden.

Computer tomography enables orientation analysis of steel fibres in reinforced concrete,

Technical University of Kaiserslautern.

Category: DesignLiebherr Compact Loader, Liebherr-Werk Bischofshofen,

Bischofshofen, Austria.Kaiser Walking Mobile Excavator 2013, Kaiser AG Fahrzeug-

werk, Schaanwald, Liechtenstein.EH 100 demolition breaker, Wacker Neuson Vertrieb Europa,

Munich

www.bauma-innovationspreis.de

Again at the German mega exhibition Bauma the International Association of Drillers and Sawers’s technical seminar will be held in conjunction with the show. The first IACDS Bauma seminar was held in 2010 and was very well received with a large number of delegates. This year the seminar will take place on Friday 19 April in conference room B11 near the Bauma main entrance and the exhibition hall A1, were most of the suppliers to the concrete sawing and drilling industry will be located. The seminar starts at 1 pm and afterwards the winners of the IACDS 2012 Diamond

IACDS at BaumaAward will be honoured. At the end of the afternoon a cocktail reception will provide an opportunity to meet with colleagues from all over the world.

Detailed information about the IACDS Bauma seminar and the schedule is on page 33-36 in this issue. Registration can be made online at

http://www.iacds.org/iacds_bauma_an-meldungen/anmeldung_e.php


Bauma has stimulated the development of crushing and screening buckets after a period of slow progress. PDi’s Heikki Harri reports.

As the world focuses on Bauma, manufacturers have had the motivation to invest in research, develop-ment and manufacturing. The number of exhibitors is another record and so is the number of companies specialising in this type of equipment. Bauma will show a lot of new crushing and screening buckets and related attachments.

MB

MB, a leading Italian manufacturer, has expanded its wide range of screening buckets with a new model, the MB-S10. The bucket is suitable for midi-diggers from 4t to 8t and is ideal for use on small scale sites and gardening. It weighs 445kg and has a capacity of 0.6m³. The company describes it as a machine that offers high quality, reduced costs and savings on time. Furthermore, it is easy to transport, manoeuvrable and a competitive and cost effective piece of equipment.

WinkelbauerMaschinenbau Winkelbauer stems from Austria. The development of the company started in 1945 and because at that time there was a big lack of materials, some of the company’s early equipment was made using broken armoured tanks as the raw material.

Now Winkelbauer is an experienced manufacturer of many types and models of demolition and construc-tion buckets, designed for a wide range of applications and can be attached to excavators and wheeled loaders.

The crushing bucket FB was designed for on site recycling and re-use of waste material deriving from construction and demolition jobs. The structure is made entirely of Hardox 400 steel, which supports heavy loads and stresses over time.

SB is the name for the screening bucket with oscillating screens. It is commonly used for screening demolition material and quarry residues, as well as for reclaiming rocky ground. The bucket features an in-novative vibrating alternating movement of the screens

Bauma stimulates bucket development


fitted longitudinally inside the bucket. There is a wide range of screen sizes available and since they are inter-changeable, the bucket can be used to screen materials of different size.

A further Winkelbauer product is the SR rotary screening bucket. There are five models in the SR range for use on excavators from 7t to 35t. The applications cover natural materials, quarry residues, sand, dry soil, and also in situations where fine screening is required.

RamtecThe Finnish company Ramtec is focused on demoli-tion attachments and hydraulic breakers. Bauma will see among other equipment the MM062, the newest and the smallest member in the company’s MM series of screening buckets. The machine can be used for screening, downsizing and loading different types of materials, including soil, wood, bricks, glass and other waste materials. It can be mounted on excavators in the 10t to 16t weight class. With the new MM062 the series now includes five models.

A particular feature in Ramtec buckets is the design of gear boxes. Since they are continuously filled with oil, there is no need for greasing or other daily maintenance.

CMCM crusher machines is one of the many Italian companies specialising in demolition attachments and

tools, also crushing and screening buckets. Its CBR series of rotary screening buckets includes five models that can be mounted on excavators weighing from 3t up to 36t. They are applied for instance for handling river bed material, demolition materials and stony soil. The buckets’ opening extends from 700mm up to 1900mm and the mesh sizes can vary from 20x20mm to 100x100mm.

The company’s CBF series of crushing buckets also include five models. They can be applied to handle demolition debris, pit and quarry residues or natural stone.

AlluFinnish company Allu, is going to launch at Bauma sev-eral new screening buckets aimed at the lighter sector of the spectrum. These include three small buckets in its D series of crushing and screening buckets and have been designed particularly for fine screening. Accord-ing to the company, the new design makes it possible to also screen wet materials down to small sizes, such as 15mm. Consequently vaulting or bridging between screening discs is minimised.

The new buckets are aimed for excavators under 12t or wheeled loaders with a maximum weight of 5t. The entire bucket range now covers excavators from 5t to 45t and wheeled loaders from 2t to 30t. The buckets can also be installed on backhoes, skid steer loaders and telescopic loaders.

EnviropacificEnviropacific is a company demonstrating that crush-ing and screening buckets are today manufactured all over the world. This company comes from Australia and while its sales are mainly concentrated to its home market, it is one of the market leaders ‘down under’. In addition to buckets the company offers a very wide range of equipment to many environmental projects.

Depending on the bucket type, the buckets are multifunctional in that they are able to crush glass, bricks, asphalt and demolition waste, and mix sand, clay, top soil, sludge and bark, among others. They can also be used to stabilise foundation layers, clay and soft soil with lime, aerate sludge compost, contaminated soil compost, and bio waste compost. In screening they can treat top soil, pipeline padding and backfill materials.

RemuThe Finnish company Remu will use Bauma as the world premiere for a new screening plant. This is a recent addition to the company’s more traditional of-fering of screening buckets and amphibious excavators. The screening plant is able to handle many types of materials from topsoil to compost. Remu’s display at Bauma will be geared around the Evolution Enterprise five model range of screening buckets.


For nearly four decades, the World of Concrete show has been more than a showcase for the construction industry’s latest product innovations. The weeklong wintertime exhibition mainstay has also provided a glimpse into the thinking of contractors and equipment manufacturers on the eve of another building season in most of North America. PDi’s Jim Parsons reports.

Some years, visitors flush with backlogs arrive at the Las Vegas Convention Centre ready to compare models and make purchasing decisions. In others, particularly the last four recession-shrouded shows, their faces betray the meagre opportunities awaiting them once their Las Vegas getaway is over. It’s as if the shiny new products, attractive booth hostesses, and smiling vendors are a mirage that will disappear in a blink of an eye. Yet despite occasional grumbles about business still being slow, this year’s show demonstrated that by and large, the North American construction and demolition market is actu-ally doing quite well.

Though the prosperity is far from universal, due to the continent’s geographic and sector diversity, several equipment manufacturers reported record sales last year, and prospects for even further growth ahead, thanks to influences as diverse as the development of massive cor-porate campuses by Exxon Mobil, Nike, and Apple, plus a new two-year federal transportation funding measure.

“Our indicators show a 6% increase in the infra-structure and construction markets this coming year,”

in diameter with SDS+ (TE-C) drill bits, and up to 88 mm using percussion core bits.

Another WOC headline grabber was Stihl’s new GS 461 Rock Boss concrete cutting saw. Capable of cuts up to a depth of 390mm, the GS 461 is ideal for plunge cuts, shaping square corners and cutting concrete pipes in trenches, cinderblocks, masonry bricks, asphalt, and soft stone. The saw also provides a powerful engine with low exhaust emissions and 13,500 maximum revs/min, plus a heavy-duty, two-stage HD2 air filtration system with a washable PET filter element and a fine mesh auxiliary filter to help protect the engine on even the dirtiest job sites. “The GS 461 addresses all the issues users are dealing with today. In addition to cleaner emis-sions, the engine reduces fuel usage by 20% compared with a standard two-stroke engine,” said Stihl product

said Hilti North America president Cary Evert. He added that aside from Europe, other regions of the world are in various stages of construction revival.

WOC’s numbers were up as well for 2013, with visitors at 54,869 and net exhibition space of 56,200m2 both showing healthy increases over 2012. And several manufacturers were rumoured to be delaying new prod-uct introductions until Bauma in April or Conexpo-Con/Agg in 2014, when, they hope, the industry’s purchasing urges will be even stronger. Contractors could not help but explore WOC’s bounty of new and upgraded equipment, and feel good about the future.

Indeed, the future was very much on Hilti’s mind with the introduction of TE 30-A36, the world’s first cordless combihammer drill and a harbinger of what Evert predicts will one day be a largely cordless jobsite. With a 36V, 6Ah battery that provides more than double the work per charge of other batteries, the TE 30-A36 drills and chips into concrete up to 40% faster than the largest SDS corded tools on the market. The TE 30-A36 provides a drilling range of 6.35mm to 25 mm Conventional drill vs Hilti TE 30-A36

IQ 912 Power Cutter

manager Dan Phersons. “The saw is easier to manoeuvre and provides diamond segments on every drive link of the chain for smoother operation.”

Norton introduced a new iLube feature for its 305mm CP512-300 and 355mm CP514-350 cut off saws. By automatically controlling the mixture of oil and fuel, iLube ensures a precise balance for maximum efficiency. A sensor automatically adjusts the engine to idle when low oil level is detected to prevent damage. The saws also feature an electro-magnetic carburettor valve that ensures quick starts, even in extreme tem-perature conditions.

Other saws on display included IQ Power Tools’ new IQ 912 Power Cutter, a 15.9kg 305mm saw with a 4.4kW engine that also features an integrated vacuum and filter system. US Saws showed a unique pneumatic belly saw designed for cutting 203mm to 610mm di-ameter ductile iron pipe. The saw’s clamshell design protects the tiger tooth blade between operation, and only 178mm of clearance beneath the pipe to complete cuts in trenches and other constrained locations.

For larger sawing applications, Diamond Products showed the WSE 1217 480V high-cycle wall saw system for cutting depths up to 508mm, and the new CC 6566 flat saw with a liquid-cooled Kubota belt drive instead of a right angle drive. Diamond Vantage’s new CS-6000 Pro diesel walk behind saw can accommodate blades from 914mm to 1067mm with dual position grips, and features a 43.4kW Kubota engine with a three-speed, water-cooled gearbox.

New beginnings for breakersAtlas Copco’s incremental westward transfer of products that have proven themselves in Europe continued at WOC with the North American debut of the SB702 727kg class breaker. Touted as the world’s largest solid body breaker, the compact oil fuelled SB702 can be

Bosch’s upgraded Brute hammer



US Saws Belly Saw

Husqvarna demolition robots

Scan Combiflex 330

installed on a broad range of carriers. An integrated protection valve protects the breaker from hydraulic overload, while water injection ports help control dust, making the SB702 ideal for use in environments where airborne particulates are a concern.

For smaller breaking applications, Bosch unveiled its DH1020VC 11.3kg SDS-max demolition hammer. Producing 23J of impact energy, the DH1020VC deliv-ers up to 40% more impact energy with a chiselling re-moval rate 80% greater than competing brands. The new model also features a longer in line design for improved weight distribution during horizontal and vertical appli-cations. As part of Bosch’s vibration control technology, an extended air cushion in the hammer mechanism and de-coupled main handle reduce vibrations.

A 12 position vario-lock allows DH1020VC users to rotate and lock the chisel into 12 different working positions for fine tuning the optimum working angle. A variable speed dial reduces the impact rate and impact energy when controlled chiselling is required.

Bosch also showed major upgrades to its BH277OVCD Brute Turbo breaker hammer. The new vibration control system includes a longer air cushion in the hammer mechanism that substantially reduces vibration levels at their source, as well as shock mounted handles. Thanks to a new motor design, the 28.6kg Brute delivers EPTA impact energy of 58J, 23%t more than its predecessor.

Some particularly interesting innovations from Bosch could be on the horizon, as the company an-

nounced a new strategic US partnership with the Ram Truck brand. According to the company’s announce-ment the collaboration will focus on the needs of build-ing and construction professionals by delivering greater productivity in a package of best-in-class power tools and trucks. Together, the two companies will pursue sales and marketing opportunities in the automotive and tool markets.

Not all breakers on display at WOC were liter-ally hands-on devices. Husqvarna rolled out two new remotely controlled demolition robots. The 1.75t DXR 270 features an 18.4kW engine and a vertical reach of 4.8 m, while the 1.96t DXR 300 boasts a 22.1kW engine and a vertical reach of 5.1m. Both models are 787mm wide to pass through most standard doorways, and feature compact bodies to provide operators with a clear view of their work areas.

To decimate debris for recycling and other uses, MB America showed its MB-L 160 and 200 crushers designed for 3.5t and 4.5t class skid loaders, respectively, and for high-flow capacity backhoes. The company plans to introduce new, smaller-sized additions to its crusher and screening bucket lines in the near future.

New standards for surface preparationOver the last several years, contractors and equipment manufacturers have ridden the growing wave of inter-

est in polished concrete among builders and fa-cilities owners. Along with the increased com-petition, however, has come confusion among

designers and end-users as to when a surface is polished,

burnished, or simply coated.Hoping to bring a higher

degree of clarification and quality to what will likely contin-ue to be a strong growth market, the Stevenson Concrete Polishing As-sociation of America used WOC to announce the release of six position pa-pers establishing industry guidelines and definitions

for various types of polished concrete. “Polished concrete means different things to different people,” said CPAA executive director Brad Burns. “With these definitions, we want to help owners figure out what they want, and be sure they get it.”

CPAA’s standardised definitions cover basic polished concrete, bonded abrasive, burnished, and hybrid opera-tions, surface coated concrete and slip resistance criteria for bonded abrasive surfaces.

Regardless of the type of surface preparation assign-ment, WOC offered a variety of new grinding products. Scanmaskin showed its Scan Combiflex 330, a 330mm wide grinding machine that converts easily into an edge grinder. SASE debuted its PDG R8, a remotely controlled version of its PDG 8000 model. The PDG R8 is powered by a 14.7kW motor and covers a 762mm wide grinding path with speeds ranging from 600 to 1,750revs/min.

Another measure of portability was on display with Kut-Rite’s new Conquer 20SS machine. Capable of operating in planetary and rotary modes on a 508mm wide cut, the 95kg Conquer 20SS quickly dismantles into two parts for easy transport. An optional handle quickly converts the machine into a counter-top unit.

Other new grinders on display included Diamatic’s

new gas-powered 435WD 433mm model for outdoor applications, and several models from Lavina, includ-ing the 20-S and 32-S. Both feature forced belt driven planetary movement, nozzle-free, anti-clogging water delivery systems, upgraded belt tensioners and inspec-tion covers and Quick Change tools that mount directly to the grinders’ new floating heads.

Several grinder manufacturers made their WOC debut, including the US company Iron Horse Machine Works from Idaho. The company showed three models ranging from 559mm to 889mm wide, which use gear drives and single or three-phase 220V power. Designed by a long time grinder operator, the models also feature handy features such as a power adapter/charger for phones and other electronic devices.

For bigger jobs requiring battery power, WOC fea-tured Blastrac’s BRB-1500 with blade widths available from 152mm to 457mm, and National Flooring Equip-ment’s model 7700, a larger version of the company’s model 5700. The 711mm wide scraper can fit through doorways and operate 8h to 10h/charge with no drop-off in speed. Other battery powered scraper options were provided by Innovatech with the 2100 ei and 2100 xme with 8h and 4h/charge, respectively.

Topping out WOC’s grinding technology was

Blastrac’s 2-48DS Global shot blaster, a 1.22m wide shot system that can cover up to 1,928m2/h of floor preparation, renovation, and maintenance work.

Blastrac also showed its. BMP-400 heavy-duty ride-on sawing and milling machine. The multi-functional BMP-400 is capable of cutting, removing, and sawing concrete, asphalt, and natural stone surfaces as deep as 60 mm. Using a unique single-piece drum fitted with 60 heavy-duty milling picks, depths of 63.5mm can be achieved on roadways and other surfaces.

Where there are grinders, there is sure to be dust and the need to collect and dispose of it. So it is no surprise that vacuums and collection systems were well represented. Among the new models was Blastrac’s self-propelled 248DC dust collector, which can cover more than 93m2/h, making it ideal for long, vertical stretches when combined with the 2-48DS shot blaster.

Diamatic offered the 3140P, a heavy-duty dust collection system equipped with a fully automatic air pulse system to clean the filters and maintenance free air compressor. The 3140P also features a 1,000litre dustbin capacity, and 220/480V power.

CDCLarue Industries debuted its 3000 series vacuum. Easily portable at 122kg, the 3000 series fea-tures 2.79m of lift and a unique tank capacity sensor that alerts the user when the tank is full.

At HTC’s booth visitors examined the company’s new Greyline pre-separator, which adds an extra stage

Kut-Rite Conquer 20SS

Blastpro BRB 1500

IronHorse grinder

Lavina 30G-S

HTC Greyline Pre-Separator



Blastrac 248DC Dust Collector

Innovatech 2100ei

of filtration and continuous operation thanks to a new bypass valve that helps speed bag changes. Though designed to work with HTC dust extractors, the 56kg pre-separator works with most other brands as well.

CTS Unitec displayed its new Model CS 1435 H HEPA vacuum, with an electromagnetic pulse cleaning system that maintains maximum suction by automati-cally shaking the HEPA filters to remove debris during operation. Weighing only 15kg, the CS 1435 H has a 25litre capacity and step-less speed control.

Big news about big machinesWacker Neuson introduced its new 803 0.8t mini-excavator designed for demolition applications in tight spaces. Powered by a 3-cylinder, 9.6kW Yanmar diesel engine, the 803 features a telescopic undercarriage that can extend from 700mm to 860mm for greater stability. The 803’s rollover protection system supports are located in the front of the operator position, rather than the back. This allows an optional debris guard to shield operators from the work-group, and narrow the 803’s profile, enhancing its ability to operate in restricted spaces.

At Kubota’s booth, three new excavators were on display, including the KX040-4, a replacement for the company’s popular K121-3. The KX040-4 features an Eco Plus system that gives operators the option to cut fuel consumption by 20% on assignments that do not require full power. Even in standard mode the upgraded model’s engine’s fuel use has been reduced by 10%.

Kubota motors are also making portable power more efficient. The company’s V3307 engine is at the heart of Chicago Pneumatic’s new CPS 275 compres-sor. Designed to fill a gap between the company’s 185 and 375 models, the 275 can run three 122J hammers. The CPS 275’s control panel also provides protective shutdown for high engine and compressor temperatures.

Doosan contributed to WOC’s portable air com-pressor options with its Platinum Series P185. A 35.3W engine provides 5.24m3/min at 6.9bar to 8.6bar, yet with half the noise as previous models. Fuel efficiency

has been increased by 21%, providing for a best-in-class 10h full load runtime on one tank of fuel. Control panels feature digital and analog read-outs for status, alarms, and other operating data.

Doosan also debuted the diesel pow-ered G25, which features a fuel efficient and emissions compliant Mitsubishi C25 engine, and an innovative airflow design to maximise operating temperature and minimise water ingression. In addition, the G25 generator has a low sound level of 66dBA to ensure quiet operation. The 151litre fuel tank assures a run-time of 19h at full load for maximum production.

What’s next?Though optimism was abundant at WOC, the spectre of the still unfinished $2.9bn Fontainebleau resort looming near the Las Vegas Convention Centre offered a silent reminder of a fast paced construction era that may well never return, and that even partial recovery is far from guaranteed.

Kubota KX040-4 (above) and U35-4 (below)

Like other exhibitors and visitors, Blastrac’s na-tional sales manager John Rippman worries that partisan driven gridlock in the US Congress could undercut the reviving economy’s momentum. “All indicators are that 2013 will be a good year, better than 2012, which was pretty good as well,” said Rippman. “I just hope it stays that way.”

Product manager Adam Purcell of Wacker Neuson discusses the 803 mini-exc


Brokk AB | P.O. Box 730 | SE-931 27 Skellefteå | Sweden | Tel +46 910 711 800 | Fax +46 910 711 811 | [email protected] | www.brokk.com

Two good reasons to visit Brokk at Bauma. Come and experience the Original Demolition Power – in any size. Welcome to our main booth at Open Air Area F6, booth no. 613/1 (you’ll also find us indoors at Hall A1 Booth 134) .

Good news when size really matters

Is the small newsthe big one? (or vice versa?)

Remco Meijer founded Holland based Meijer Diamond Tools in 1994. With an educational background in automotive engineering, he acquired experience in dia-mond tooling while working for a local manufacturer, first as an engineer, then as a sales manager for Benelux. It was then and there that Meijer became convinced of the commercial potential that the market of diamond tipped consumables had.

The reseller Having conducted market research, Meijer decided to zoom in on supplying the market with core bits and diamond blades through Meijer. Being a one man en-terprise and not yet owning any production facilities, Meijer started out as a reseller. The main equipment it sold included diamond blades for cutting pre-stressed hollow concrete slabs and calcium silicate blocks. By 2001 the Dutch supplier felt confident to try its hand at manufacturing. This was a quantum leap for such a small company, but they managed to pull it off.

The manufacturer Meijer realised that in order to be recognised in this business, a manufacturer did not just have to possess the relevant experience, but had proper research and development and production capabilities as well. In the early 2000s, when all required constituents were in place, Meijer successfully completed its transformation from a reseller to a manufacturer. As an aspiring tool maker, it took the familiar path of producing diamond blades and segments for sawing hollow concrete slabs. A small company has a big advantage of being able to react faster and more efficiently to its customers’ wishes and requests than its bigger rivals, and Meijer used it to the fullest. Meijer’s focus on craftsmanship and customisation also helped it keep up with the stiff competition that already existed in the diamond tooling segment at the time.

International ambitions from the start Even in the beginning when Meijer was only a tiny op-eration, Meijer never wanted it to be limited in Benelux. He always envisioned Meijer becoming a global player one day. It did take Meijer almost a decade to build up

DUTCH CRAFTSMENIntroducing a new company is perhaps the most exciting aspect of a PDi editor’s job. However, in the instance of Meijer Diamond Tools, new is only partially correct, given the solid reputation it already enjoys in Benelux. On the other hand, the Dutch company is now set for their international breakthrough, and this is definitely a new experience for them and also big news for the industry. Andrei Bushmarin reports.

its muscles, but now the company is ready to break into the big time. A while ago, Meijer began to supply its products to Germany, Switzerland, Sweden, Malaysia and Russia. Now the company is looking to increase its international reach by trying to find partners in differ-ent countries who would share the same entrepreneurial values and might want to represent Meijer locally.

Digital-age thinking Currently Meijer is a small but vibrant team led by charismatic Meijer. The manufacturer strives to keep the number of personnel down by investing a significant amount into fully automated production facilities and employing all-round professionals. As a result, only two technicians are needed to oversee the production of up to two hundred 100mm core bits a day and just as many diamond blades. About 30% of the output is marketed under private labels. Saleswise, Meijer follows a flexible strategy, dealing with both end users and re-sellers. A modern thinking company, Meijer recognises the im-portance of the Internet and social media as a sales and marketing tool. Not content with just having profiles on Facebook, Hyves, Twitter and LinkedIn, Meijer has invested in its own free app for mobile devices.

Hardware is the next stepBeing essentially a tool manufacturer, Meijer does not make any concrete cutting and drilling hardware. But the situation is likely to change soon, as the Dutch are eyeing the drill rig segment for further expansion. Ac-cording to Meijer, there is a big demand among drilling professionals for sturdy reliable rigs, and the company is going to fill that niche. In the meantime, Meijer deals in different types of concrete cutting and drilling machinery, Cardi and Weka drill motors being one ex-ample. Since 2011, Meijer is also an official distributor of Demco Technic’s wall and wire sawing equipment in Benelux. “Times are hard for diamond tool makers, and if a company wants to make it in this business, , it has to be inventive and diversified, which Meijer is,” says Remco Meijer.

www.meijertools.com

Remco Meijer, the founder and owner of Meijer Diamond Tools

Edo van Someren, sales manager at Meijer Diamond Tools

Manufacturing of concrete coring hardware will be the next step

A significant amount was invested into fully-automated production facilities


On the opening day of the show before the gates actually open the picture resembles a marathon competition right before the start. Thousands of visitors wait by the gates. But when it comes to Bauma the race takes several hours. To actually get a good indica-tion of the 570,000m2 show you need close to the seven days the show is open. But visitors are not interested in every product on display. Bauma is the biggest show in the world in all categories in terms of space. As PDi went to press 3133 companies had booked space at the show. Actually that is 123 exhibitors less then in 2010 when 3256 companies exhibited. But the interest for the show is still just as gigantic as the waiting list for space at the show is long. What has happened this time is that many exhibitors have increased their space at the show.

In 2010 the show had a space of 555,000m2 and the organ-iser reached the space limit in 2010. But after going through all potential areas around the show grounds the organiser found an additional 15,000m2 for this year’s show. But after this year all possible areas have been used. The fair grounds are surrounded by roads or buildings, which limits further expansion. What is planned for the show in 2016 is to build two new halls on the existing show ground. Bauma 2013 is expected to become the same type of popular branch party as usual. Most of the hotels in the Munich area are fully booked. And if they are not completely booked the last rooms go for a minimum price around €460 and that is for a very simple standard room with no breakfast included. The week after Bauma the rates are down to a normal level again around €80.

When Bauma was organised in 2010 about 420,000 people visited the show. The visitors came from 200 different countries. People came from remote countries to a much bigger extent then other shows. Bauma is unique when it comes to the amount of international visitors. Visitors from European countries dominate and in particular from German speaking countries.

“Prost for Bauma”: the global constructionindustry’s mega show

It is amazing that three years have gone and in April it will again be time for the mega construction equipment show Bauma in Munich, Germany.

A table with foreign guests.

Issue 1 • February - March 2013 • PDi 3332 PDi • Issue 1 • February - March 2013

34 PDi • Issue 1 • February - March 2013 Issue 1 • February - March 2013 • PDi 3534 PDi • Issue 1 • February - March 2013 Issue 1 • February - March 2013 • PDi 35


A hall full of concrete cutting equipmentIn terms of people working with concrete sawing and drilling, demolition, concrete floor grinding, recycling, scrap and material handling a large number come from European countries. There is also a big concentration of manufacturers of equipment for these sectors in Europe who will be exhibiting. In terms of equip-ment for concrete sawing and drilling, concrete floor grinding and polishing, some traditional demolition equipment, hydrodemolition equipment and related products most exhibitors are gathered in one of the 16 halls and mainly in hall A1. About 170 companies will be in hall 1. Some will also be in hall A2 and outside hall A1 in the demonstration areas. Demolition and recycling manufacturers are Scattered around the show. They will be in the halls and in the outdoor exhibition Areas such as F6, F7, F8, F9, F10 and F11. PDi’s stand is A1. 134 in hall A1. Information on some of the new products to be launched at the show is also covered in the following pages.

In addition the International Associa-tion of Diamond Drillers and Sawers

will host a number of seminars on Friday 19 April and will announce

the winners of the IACDS Diamond Awards. In the

afternoon a cocktail party will be held in

room B11.



The petrol versions CFG25 and CFG67 are driven by Honda engines, with a power of 3.7kW and 6.4kW respectively. The CFD33 and CFD67 diesel versions feature Lombardini engines, with 3.7kW and 5.7kW.

Atlas Copco launches handheldhydraulic pick hammer

Atlas Copco will use Bauma to introduce the lightest fully vibro-reduced handheld hydraulic pick hammer, the LH 8E. Weighing 9.5kg, the breaker is ideally suited for horizontal work in brick and concrete as well as building renovation. The new vibro-reduced housing and handle are the key to a significant decrease of vibrations.

The newly designed vibro-reduced housing, where the hammer mechanism floats in the canopy, dampens vibrations throughout the whole hammer body. This significantly decreases the vibrations transmitted to the operator’s hands and arms.

The LH 8E also features a large vibro-reduced D-handle for superior handling. The front handle provides full control and support when starting a cut. The handle can be indexed 360° or turned horizontally, or even removed altogether and the other gripping surfaces of the machine can be used instead. Using the multiple gripping surface the operator has the possibil-ity of choosing an optimum working position and with noticeably better dampening of the vibrations, in both hands, compared with other standard hammers without vibro-reduction in this weight class.

The LH 8E will run on a standard hydraulic system providing 20litres/min flow and is designed to run on any Atlas Copco power pack. Equipped with hydraulic tail hoses and quick release flat face couplers it can easy be connected and operated by any standard power pack or hydraulic flow with controlled outlet complying with the EHTMA cat “C” standards.

AUSABooth: F8.808/2

Ausa will launch the T 144 H Plusultra-compact telehandler at Bauma

The Spanish company Ausa will use Bauma to launch the T 144 H Plus ultra-compact telehandler in the outside Area F8, Stand 808/2. Full information is available at http://www.ausa.com/compact-power

Ausa will also display its industrial range of dump-ers, mixers, forklifts and telehandlers. Each line will include new tools such as the exclusive fork positioner with integrated side shift for the forklifts or the electro-hydraulic weighing system for the mixer X 1100 RH. Some new equipment packs will also be launched, including the Construct Pack and the Agri Pack, which include specific implements and accessories.

Ausa will also show the B200 4x4x4 from the Urban range that can be equipped

with a large number of implements. The company claims It is the per-

fect machine for

markets with winter periods, allowing the use of the machine 365 days a year for a very low investment and high profitability.

BlastracBooth: A1.227

BHG-1800 is Blastrac’s latest addition

The Blastrac BHG-1800 is the latest addition to the company’s range of handheld machines. It is a heavy duty, light weight hand grinder when used in conjunc-tion with the standard 125mm diameter cup wheel. The BHG-1800 handheld grinder is dust free when connected to the appropriate Blastrac dust collection system.

The anti-vibration handle absorbs vibrations making this grinder more suitable for all day use. The Blastrac BHG-1800 is ideal for edges and corners and is best suited for surface preparation before coating, grinding, removing or etching of coatings, paint, ad-hesives, surface leveling, asbestos and much more. The BHG-1800 has several optional grinding discs for use on specific applications.

The BHG-1800, together with Blastrac’s other latest products will be on show at Bauma indoor in Hall A1 stand A227 and outside of Hall A1 stand 5.

Blastrac has also opened a new office in Italy and can be contacted on E-mail: [email protected]

CaseCase unveils new wheeled and

crawler excavators

Case Construction Equipment has launched their new Se-ries 8 Wheeled excavators and Tier 4 Final mid-size crawler excavators. The first of the new Series 8 wheeled loaders are the WX148, WX168 and WX188 and were developed in close collaboration with the users. Twenty prototypes and pre-series models were made available to operators in the product validation phase, and 5,600h of field tests were completed in every possible application to ensure the new wheeled excavators met all their users’ requirements.

The Case CX75C SR and CX80C crawler excavators comply with Tier 4 emissions through the use of cooled exhaust gas recirculation combined with a diesel oxida-tion catalyst system. The short radius CX75 SR and the conventional CX80C have been developed with operator

comfort and safety as design priority. The cab has been redesigned, meeting ROPS and FOPS Level II safety stan-dards. Interior space has been increased andr ear visibility has been improved with the option of a rear view camera.

The new midi size excavators have the same full color monitor as larger excavators from the Case CX C Series. Both models are equipped with an automatic air conditioning system, which includes five adjustable air vents plus two defrost air vents, as standard.

Case goes pink

Scale models of a pink Case backhoe loader have gone on sale at the company’s online shop: www.case-ceshop.com. The models are scale replicas of a full size Case 580 backhoe loader that was painted pink to raise awareness about cancer. This was the idea of Marvin Linder, a design engineer at the US plant in Iowa, after his wife Leslie died of breast cancer.

“We have had many employees and family members affected by cancer over the past few years,” said Marvin Linder. “I wanted to make this a big cancer push for awareness and help raise money at the same time.” The backhoe loader, bearing a special decal reading Digging for a Cure, has been creating awareness for cancer and helping raise donations at events in Iowa throughout since 2011.

CaterpillarBooth: B6.106/406

Caterpillar’s big Bauma display

Caterpillar, in cooperation with its German dealer, Zeppelin Baumaschinen, will display more than 70 ma-chines, work tools and engines, as well as the latest tech-nology, solutions and services in three different areas.

The main indoor stand in hall B6 features more than 50 machines. These will include the new Cat 336E H hybrid excavator, the 988K wheel loader, the Cat 966K XE wheel loader and the Cat D7E electric drive track type tractor.

Additional Cat machine introductions feature four mini excavators, Cat 302.2D, 302.4D and the compact radius 301.7D and 308E2, the 444F equal size tyre backhoe loader and the D6K2 track type tractor. The recently introduced 318E hydraulic excavator and M313D wheel excavator, the 120M2 motor grader as well as the 91t capacity 777G off-highway truck will be on show. Matched with the 777G truck is the new 6020B hydraulic mining shovel. With a 220t operating weight the 6020B is the largest Cat machine on display.

The broad range of machines displayed also includes Cat paving products with the introduction of three new models, the AP300D paver and two utility compactors CB24B and CB34B XW.

CedimaBooth: A1.335/434

Cedima to show its diamond tools and machines

Since 1984 the Germany company Cedima has been one of the leading manufacturers of diamond tools and

Bauma

SNEAK

PreviewBauma 2013 is quickly approaching. To help you get ready, take a peek at some of the companies that will be exhibiting.

Allu GroupBooth: FGN.N718/2

New mass stabilisation system to be presented

The Finnish company Allu will display new products and innovations at Bauma. With mass soil stabilisation, soft and contaminated soils can be transformed into solid and usable land. With the new Allu 3D positioning system mass stabilisation work can be performed more accurately and easily than ever before. Also the Allu screener crusher family is expanding with new models and in addition new screening technology for bucket type screening devices will be launched at their open air area F7 stand number N718/2.

Mass stabilisation is a method for strengthening soft soils. It can also be used for processing contaminated material by encapsulating the soil in situ and thus pre-venting the contaminant from spreading into the sur-rounding areas. Currently the most popular use of mass stabilisation technology is in road construction projects and harbours, however more recently the technique has been used for processing difficult to handle sludge, as an alternative to more expensive methods.

The mass stabilisation process is carried out by feeding dry powder like binder from a pressure feeder via hose to the mixing head mounted on an excavator. The mix-ing head is positioned in the work area with the help

of the new Allu 3D positioning system. This guides the base machine operator to feed the right amount of binder and to mix adequately each block of the site. It also tells when to change location and start stabilising from another point. The new positioning system can be mounted on all existing Allu stabilisation systems.

The Allu D series screener crusher is divided into the two main categories of screening and crushing and fine screening. At Bauma Allu will present a new screening concept for bucket type fine screening. With a totally new screening design wet materials can also be screened down to a fine fragment size of 15mm. With the new design vaulting or bridging between the screening discs can be minimised.

Allu will also widen its product range to cover smaller base machines by introducing three new fine screening bucket models for excavators under 12t and wheel loaders of 5t. The complete Allu D series product range includes now models for 5t to 45 t excavators and 2t to 30 t wheeled loaders. Allu buckets can be installed also on backhoes, skid steers and telescopic loaders.

Atlas Copco MCTBooth: FH.1108

New jaw turns Combi Cutter into mobile shear

At Bauma Atlas Copco will launch a new jaw variant that turns the CC 3300 Combi Cutter into a mobile shear. “Our aim is to be a leading manufacturer and solution provider for the demolition market. To round off our offerings in the silent demolition tools segment, we are introducing a mobile shear jaw for our CC 3300 Combi Cutter,” said silent demolition tools product manager Wolfgang Hohn.

With the new mobile shear jaw, Atlas Copco ad-dresses the global demolition and recycling industry as well as scrap yards. “We are aiming at applications such as primary cutting of steel structures, cutting and sizing profiles, beams, frames and rebar,” said Hohn.

The CC 3300 follows the design of the entire prod-uct line of Atlas Copco hydraulic combi cutters. The system with the two movable jaws and the two lifting cylinders has stood the test and offers a constantly high

crushing force throughout the entire closing process. The combination of a single and double blade jaw

arm provides maximum stability even under extreme loads. The new mobile shear jaws is an addition to the universal jaws version, steel cutting jaws and box shape jaws, which are all available for the CC 3300.

A central main pin supports the cutter jaws, which re-duces the time to change the cutter jaws by up to 75%, compared to separately supported jaws. Both cutter jaws can be fitted and removed as one unit due to the coupling and positioning system), which holds both jaws together even after they have been removed. The blades are reversible and exchangeable on site.

Smart range of electric pokers

Atlas Copco’s new Smart range of electric concrete poker vibrators, on show at Bauma, are light and manoeuvrable and easy to use. Thanks to the built-in frequency converter all that is needed to start working is a regular wall socket with the appropriate voltage. The electric motor in the head design provides the poker with high performance, power and stable speed. A 10m cable and 5m hose give adequate reach around the worksite and special hose lengths are available on request.

New generators for electric pokers

Atlas Copco will introduce a new range of petrol and diesel driven generators for electric poker vibrators at Bauma. The generators come in four different sizes from 25A to 67A output. They can simultaneously supply several pokers with power and come with 2, 3 or 4 outlets.


machines for the construction industry. Cedima exports to more than 50 countries world wide and will be ex-hibiting at Bauma in Hall A1 stand 335/434. Cedima will present technical innovations in joint cutters, wall saws, table saws and drilling technology.

Chicago PneumaticBooth: F11.1111/6

New generator and breaker will launch at Bauma

Chicago Pneumatic will launch its new CPDG250 generator and new RX38 hydraulic breaker at Bauma. The generator has a Volvo engine and a Leroy-Somer alternator providing a power output of 250kVA at 50Hz.

The generator is easy to operate with user-friendly instrument panels, backlighting on important gauges and displays, as well as engine protection alarms, such as high coolant temperature and low oil pressure, and operation warnings, such us low fuel level. Maintenance is straightforward with large panels providing access

to all necessary parts. Oil and coolant draining points outside the canopy allow for

easy removal of fluids.The RX38 hydraulic

breaker is designed for carrier units between 20t to 46t and is suitable for medium and heavy industrial demolition, building renovation, road construction, rock excavation and mining ap-plications.

The breaker’s PowerControl Plus, enables the operator to adjust the operation mode to the application. It is a combined stroke length and start-up mode switching valve the operator can change in the field without

opening the hydraulic circuit. In PowerStop Plus mode, the RX38 delivers 380-590blows/min, suitable for solid ground, large rocks, heavy concrete structures or trenching. In

this mode, the operator can switch to high impact energy with normal impact rate. For ap-plications such as unstable ground, small rocks or thin concrete surfaces the unit delivers 530-800blows/min in its EasyPower Plus mode, giving high impact rate with normal impact energy. The easy Power Plus mode is also recommended when working in horizontal or overhead positions.

Chicago Pneumatic’s new range at Bauma

Chicago Pneumatic will introduce a new range of concrete equipment, including concrete flat saws will be introduced at Bauma. These products extend the line

of construction equipment and will be available at CP dealers worldwide from April 2013.

Three types of concrete pokers driven pneumati-cally, mechanically and electrically, will be available in the most common sizes, from 27mm to 77mm diameter. The VPP pneumatic pokers from 27mm up to 77mm diameter feature low air consumption and a 2m or 4m hose. These are used whenever compressed air is available and high productivity is required.

The new VPM Mechanical pokers of 25mm to 55mm diameter, are accompanied by new diesel, gaso-line and electric drive units.

The VPE electric pokers, driven by new VCE fre-quency converter and generators, are available in sizes from 40mm to 60mm diameter.

For concrete cutting or road maintenance the new SCD350 and SCD350 floor saws will be launched, featuring a Lombardini diesel or Honda gasoline engine with a maximum blade diameter of 350mm allowing a cutting depth of max 120mm. Later in the year, the range will be extended to include concrete trowels and beams.

D-TecBooth: FGN.N815/1

New equipment on display

At Bauma D-Tec, from the Netherlands, will show its grapple, container trailer line and tank trailer. The new line of grapples is available for excavators from 0.7t to 50t. The benefits of the grapples can be found in demolition of structures, sorting debris, landscaping and material handling at recycling yards.

The container trailers provide precise flexibility for logistics suppliers. Ideal for transporting of ISO containers the construction is ingenious yet durable and extremely low maintenance.

Element SixBooth: C3.309

New synthetic diamond road pick

The UK company Element Six will use Bauma to launch a new synthetic diamond D Power road pick delivering higher impact resistance coupled with an improved head design incorporating tungsten carbide which of-fers greater steel protection. The improvements result in the extension of overall tool life and customers from test programmes have experienced the benefits of having a tip that retains its shape over the full life of the tool.

The greater wear resistance will enable road contrac-tors to improve the lifespan of the entire road pick. The D Power road pick range exceeds 40 times the lifetime of standard carbide picks, delivers lower lifetime costs, greater fuel efficiency and a better delivered surface finish, the company claims.

Element Six has confirmed the construction of the world’s largest and most sophisticated synthetic diamond supermaterials research and development facility is on track to open in the UK in Spring of 2013. Employing more than 100 engineers and technicians the €24m investment, near Oxford, will consolidate Element Six’s global innovation teams into one integrated centre, developing a pipeline of innovative products for custom-ers in industries from oil and gas drilling to machining and electronics.

HiltiBooth: A1.410

Hilti to display new CutAssist

For Hilti, the Bauma 2013 trade fair marks the kick-off for an entirely new technology that makes cutting with diamond systems more efficient: the so-called CutAssist assistant. On Stand 401 in Hall A1, Hilti will also be presenting a cordless system for making post-installed rebar connections using the new TE 30-A cordless rotary hammer and showing a range of products from the fields of measuring, detection and fastening systems.

The highlight on the Hilti stand is the new DST 10-CA electric wall saw with high-frequency drive, a system that combines two premieres in one – a wireless remote control unit and a built-in cutting assistant known as CutAssist. These innovations boost sawing productivity tremendously. The new DST 10-CA wall saw, however, is only the beginning as the new CutAssist technology will also be incorporated in other future machines of the latest Hilti generation.

Another key topic for Hilti at Bauma is post-installed rebar connections. Innovative new Hilti products that make hole cleaning after drilling com-pletely unnecessary and allow the work to be carried out without need for electric power cables will attract a lot of attention. In live demos you will be able to see the whole system in action, with post-installed rebar con-


nections being made using the TE 30-A cordless rotary hammer, the TE-CD hollow drill bit, the VC 40-UM-Y cordless hybrid vacuum cleaner, Hilti HIT-HY 200-R injectable adhesive mortar and the HDE 500-A22 cordless electric dispenser. Although hole cleaning after drilling is no longer necessary, the requirements for all applicable approvals are fulfilled by this system without any reduction in permissible loads.

The Hilti presentation at the trade fair will be rounded off by many other new products including the GX 90-W gas-actuated fastening tool for wood-to-wood fastenings and the PS 1000 impulse radar detection system for the non-destructive analysis of concrete structures.

HusqvarnaBooth: A1.127/226

Husqvarna launches new Diagrip2

Husqvarna’s new updated Diagrip2 will offer high cut-ting speed, improved flexibility and top balance of speed and tool life. With optimum distribution of diamonds and specially designed segments, Husqvarna claims Diagrip2™ will cut faster and smoother through heavily reinforced concrete up to 30% faster than existing blades.

Based on the Diagrip technology, which distributes the diamonds in a 3-dimentional matrix inside the seg-ment, Diagrip2 additionally optimises the distribution of the contact areas. “With Diagrip2, the company has taken the technology to the next level with the new concept built on blades and drill bits with castellated segments,” said Husqvarna head of diamond tools Michel Hubermont.

Diagrip2 features a high concentration of dia-monds, with cutting edges optimally and evenly distrib-uted in the segments around the tool. This maximises the cutting capacity of every diamond. The optimum diamond positioning of Diagrip technology means that the diamonds are constantly exposed, which in combination with Diagrip2 features gets energy and torque focused on the diamond cutting edges. The result is a very even and powerful sawing with a minimum of unnecessary friction.

The segments also facilitates slurry transportation, which ensures cutting speed and a longer tool life. The optimisation of the segment geometry combined with the Diagrip technology makes way for a completely new range of diamond tools, with a wider application window, 20% to 30% faster cutting speed and signifi-cantly longer life than existing high-tech diamond tools.

“Traditionally, when it comes to diamond blades, there has been a trade-off between speed and product life. What you increase in speed you lose in tool life, and vice versa. But the Diagrip2 offers an excellent balance of both,” said Hubermont who added that the new Husqvarna 1400 Diagrip2 series will replace the Husqvarna 1200 Diagrip series.

Husqvarna launches twocompact demolition robots

Husqvarna has added the DXR 270 and DXR 300 to its range of compact remotely controlled demolition robots. The machines’ outriggers, with extra span, pro-vide increased stability for a greater workload. The fixed arm on the DXR 270 has a stable, durable design for precise positioning of the tool and has a reach of 4.8m, while the DXR 300 can reach to 5.2m.

The DXR 270 weighs 1.75t and DXR 300 1.96t and both are 780mm wide. There low height gives the operators a free view over the machine, making opera-tions more efficient and safer. “We have developed these robots because we have seen a demand for lighter units in this segment. With its compact design and low weight, it is easy to transport as it fits through all normal doorways and can be transported in most lifts,” said Husqvarna construction global product manager Lars Gustafsson.

Like all the other Husqvarna DXR de-molition robots, DXR 270 and DXR 300

are controlled by an easy-to-use remote control with an 89mm colour display and Bluetooth technology. The control system is adapted to handle demolition environments.

The DXR 270 and DXR 300 are applicable for most work related to concrete demolition and smaller indoors and outdoor excavation work. “With this latest product launch, Husqvarna can now offer a complete series of remote demolition robots within the range of 1000 kg to 2000 kg, depending on customer needs,” said Gustafsson.

New Husqvarna K 760

With the launch of the new Husqvarna K 760, Husqvarna takes another step toward increased user-friendliness. Optimised engine performance, enhanced starting and ergonomics are just some of the areas that have been improved on the new K 760. The new

cylinder is designed to increase the power cutter’s ca-pacity. Due to the cylinder and an additional cooling fin, emissions have been reduced by 15% compared to the previous model. This ensures optimum operating temperatures and it makes the machine less sensitive to climate variations.

The digital ignition system for the K 760 engine offers better starting and also makes the engine run smoother. This leads to very low vibrations, <2,5m/s2, which significantly reduces the strain on the user. The integration of the fast idle lock in choke is another improvement that makes starting easier. Ergonomics have also been improved with the new K 760. The new, lighter blade guard, made of magnesium gives the cutter better balance and provides variable guard adjustment.

The new blade guard includes a reversible blade bushing that allows easy switching between blades with different centre holes. One improvement that increases usability and dust control is the new wet cutting kit with a progressive valve. It is easy to set the exact water flow for each application, which minimises waste and slurry.

The new tank ventilation ensures optimum air supply to the fuel tank and at the

same t ime

prevents dust from getting in. Together with the heat resistant rear belt cover, this provides operators with maximum operating times and extended product life.

The new K 760 also hosts a number of features from the previous K 760 model. These include a low emissions X-Torq engine, the active air filtration filter cleaning system and SmartCarb, the advanced carburet-tor, which automatically controls fuel/air mixtures to always give the engine maximum power.

The K 760 is an all round machine and well suited to most indoor cutting jobs as well as cutting concrete and stone when carrying out ground work, renovations or new production. It is also perfect for cutting smaller holes, as well as pipe, asphalt and metal cutting.

Husqvarna’s new high frequency range

Husqvarna is also launching a new high frequency platform (see page 55) and the new range includes the electric power cutter K6500 that is able to adapt to the

Quality diamond for hollow core slabs

Meijer Diamond Tools BV Loubergweg 34 NL-6961 EK Eerbeek The Netherlands Tel: +31 313 659555 Fax: +31 313 656854 Email: [email protected] Website: www.meijertools.nl

Quality diamond drill segments


electrical power supplied. It works just as well on 3 or 1 phase. Husqvarna has at press stop of this issue not released much information on the new cutter but we hope to publish more information in the PDi Bauma show issue. Another new product is the new HF drill motor DM650 that is optimized to the new HF plat-form. More information on DM 650 in the coming issue of PDi.

“With the launch of our new high frequency technology, we are able to offer our customers a state of the art product range, with superior features that will facilitate their daily work,” said Gustafsson.

The high frequency range is distinguished by the superior ergonomics and high power to weight ratio. The design and wide application area of the machines also offer users a great amount of flexibility. The new product platform sets a new standard in the industry with regards to performance and ergonomics. First out are a power cutter and a drill motor with a correspond-ing power pack.

Hyundai Heavy Ind.Booth: F8.813A

Hyundai’s new 2.6t class mini excavator

Hyundai’s R25Z-9A mini excavator, to be presented at Bauma, fills a big gap in the company’s range between the models R16-9 and R27Z-9. This 2.6t class mini crawler excavator has zero turn radius, allowing it to turn within its own contours for working in confined spaces when fitted with buckets up to 0.07m3.

The new excavator is 4.03m long, 2.5m high and 1.5m wide. It comes standard with 250mm rubber tracks for particularly low ground pressure and with blade. It has a wide range of optional attachments for use in varied applications.

The R25Z-9A has a maximum excavation depth of 2.42m and its boom length of 4.48m makes it top of the range in its class. As with all Hyundai mini excavators,

the R25Z-9A has two driving speeds of 2.5km/h and 4.5km/h, so it can be used in a delicate work environ-ment or be driven at higher speed to the work site.

This new Korean built excavator has been fitted with a long life plastic air filter for easier maintenance. Lubrication intervals have been increased from 50 to 250 operating hours thanks to the use of self-lubricating bushings.

Indexator RototiltBooth: FGN.N815/4

World premiere for new product line

Indexator Rototilt Systems will unveil several new products at Bauma including a new tilt rotator range for excavators. “This is one of the greatest technical

advancements that the tilt rotator market has seen in a long time,” said Indexator Rototilt Systems sales and marketing manager Per Väppling. “The Rototilt Ad-vance Line offers a unique safety lock, an entirely new control system, a new hydraulics solution and high-flow swivel, which give this range a unique market position.”

Safety system avoids accidents

The new patent pending safety lock, SecureLock, is Indexator Rototilt Systems’ answer for secure work tool locking. The solution is a combination of hydraulics, mechanics and electronics to ensure that the work tool is securely locked. The operator is immediately alerted by several indicators if the work tool is not correctly applied.

Future control systems

Indexator Control System, is the next generation of control systems. Its location sensor, automatic calibra-tion and driver’s cab display provide new opportunities to control the work tool and to integrate the system with other types of measuring and positioning systems. ICS will be the first control system offered with the new advanced product line.

Optimised hydraulics with high-flow swivel

A flow of 200litres allows the operator to use several types of hydraulic tools, such as sweeper rollers, vibratory plate compactor, sorting grapples and multi-grapples. The new design offers a better hose routing, which minimises hose wear and makes the unit easier to service. A new type of high-flow swivel provides greater flexibility, enabling the use of high-flow tools or several tools in parallel with the double extra function.

Improved central lubrication with ILS

The Indexator Lubrication System is a factory-fitted option, which allows central lubrication of the tilt rotator. This has been developed to work on all available central lubrication systems, and also simplifies manual lubrication of older excavators. The ILS package consists of a robust distributor block with hoses, connected to the various lubrication points on the tilt rotator. The block is then connected to the excavator and quickly distributes the right amount of lubrication.

Specially designed grapples

With the premiere of four entirely new grapples, Indexator Rototilt Systems now offers a comprehensive range of specially designed grapples for the existing Rototilt range Classic Line and the new Advance Line. The first in the range to be launched are the MG40, MG60 and SG40; and SG60 for excavators between 10t and 24t.

KleemannBooth: F10.1011/1012

Kleemann’s new mobile jaw crushers

At Bauma Kleemann will show its new jaw crushers Mobicat MC 110 Z and MC 110 R further expand-ing the company’s EVO Contractor range. The new Mobicat EVO series have been redesigned from scratch, allowing the combination of new features, such as the hopper walls integrated in the chassis or a fully hydraulic crushing gap adjustment with independent double-decker pre screen.

Similar to the mobile impact crushers in the Mobirex EVO series, drive variants with direct drive crushers and electric drives for the vibrating conveyors, belts and the pre screen, are now used for the mobile jaw crushers. This means efficient operation and allows optimum loading of the crusher. The continuous feed system controls an even more equal loading of the crushing area, in which the conveying frequencies of the feeder trough and the pre screen are adapted independently of each other to the level of the crusher helping increase the performance.

The new crusher has an articulated jaw, which prevents blocking of coarse material and takes all fasten-ing elements of the crusher jaw from the wear area. In addition, the transfer from the pre screen or the feeder trough is designed so that the material can simply tilt into the crushing jaw and convey an even material flow. With this property and other features Kleemann achieves outputs of up to 300t/h.

KobelcoBooth: F12.1202/2

Short tail swing excavator to be featured

Kobelco Construction Machinery ended its global alliance with CNH Global on 31 December 2012. For the first time in 10 years, Kobelco is returning on its own to markets in Europe, North America, South America, the Middle East and Russia. At Bauma on stand F12.1202/2, Kobelco will exhibit the 26t short radius hydraulic excavator SK260SRNLC-3 in two piece boom specification.

Kobelco’s latest excavator is equipped with a short tail swing feature. Kobelco has also improved its low fuel consumption and low noise technologies. Kobelco’s integrated noise and dust reduction system reduces noise by 5dB in the SK260SRNLC-3 to a 95 dB. In addition, new hydraulic circuitry reduces pres-sure loss, resulting in considerable improvement in fuel consumption. In comparison to a conventional SK235SRNLC-2, the new excavator has improved its digging productivity by 6% in heavy digging mode and by 9% in the newly set ECO mode, compared to the previous model’s fuel saving mode.

Kobelco has started recruiting dealers from all over the world and owing to the high degree of interest, the company is confident of rebuilding a new and reliable dealer network.

With a Pentruder you can always expect HighestQuality, Reliability and Power.

Try a Pentruder You too - A Safe Investmentin equipment which is Built To Last!

All Pentruder Equipment is Made in Sweden. We produce precision parts in our own workshop, from the best materials, in state of the art production machines. With over 35 years of experience from designing transmissions and building concrete cutting equipment, we know what works and what the contractor needs.

Tractive AB I Gjutargatan 54 I 78170 Borlänge I SverigeTel: +46 (0)243 221155 I Fax: +46 (0)243 221180E-mail: [email protected] I www.pentruder.com

Please visit our homepage www.pentruder.com for more information about our products and contact

details to your Pentruder Sales Distributor.

With a Pentruder you can always expect HighestQuality, Reliability and Power.

Try a Pentruder You too - A Safe Investmentin equipment which is Built To Last!

All Pentruder Equipment is Made in Sweden. We produce precision parts in our own workshop, from the best materials, in state of the art production machines. With over 35 years of experience from designing transmissions and building concrete cutting equipment, we know what works and what the contractor needs.

Tractive AB I Gjutargatan 54 I 78170 Borlänge I SverigeTel: +46 (0)243 221155 I Fax: +46 (0)243 221180E-mail: [email protected] I www.pentruder.com

Please visit our homepage www.pentruder.com for more information about our products and contact

details to your Pentruder Sales Distributor.


KomatsuBooths: B5.102/302, B5.104/304,

B5.301/400, B5.303/402, F5.512/3, B0.3, A6.207/308

Komatsu to premiere new dozer and excavator

At Bauma Komatsu will display a vast array of equip-ment, including the world premiere of a new dozer and an excavator built around Komatsu’s concept of intelligent machine control. These two machines will demonstrate in a live performance how they will help customers enhance their productivity, reduce costs of operations and improve job site safety.

Three other new machines, theWA320-7 and WA470-7 wheel loaders, and the PC138US-10 excava-tor, with EU Stage IIIB engines, will also be presented to the public for the first time. A total of 28 other machines, representative of the complete Komatsu range, will be available for inspection, including the HB215LC-1 hybrid excavator, the first ‘green’ machine of its kind, already at work on hundreds of job sites around the world.

All Komatsu services will be highlighted, and visitors will learn more about how Komatsu’s product support and dealer and customer services, such as Komatsu CARE, Dealer Qualified Used Machines and Komatsu Genuine Parts, can help improve a business. There will be an area dedicated to Komtrax, Komatsu’s exclusive wireless monitoring system, and to the latest upgrades available as standard on Komatsu machines. The mining corner, and a cabin of a PC8000 mining excavator, will also draw a lot of attention.

A press conference is scheduled on 16 April where Komatsu chairman Kunio Noji will present his view on the future direction of the company.

LiebherrBooths: A4.115, B0.1, F8.809,

F8.810/811, F8.812, F8.813, F10.1003/2Liebherr to present a vast range of equipment

At Bauma, the Liebherr Group will be exhibiting a vast array of new and updated products from every area of its extensive construction and mining machinery pro-gramme, on a total display area of more than 14,000m2. The central meeting point for visitors will be the Lieb-herr stand 809 – 813 on the Group’s open-air site, which was first used at the previous Bauma. Work began in November 2012 on re-erecting the buildings. The two long sections raised on stilts are directly adjacent to the various product divisions’ display areas on the open-air site, and as visitors approach they will have a clear

view of over 60 products from the group’s construction machinery programmes.

The list of exhibits includes eight tower cranes, two mobile construction cranes, ten mobile cranes, four crawler cranes, three duty-cycle crawler cranes, a large rotary drilling rig, three wheeled excavators, seven crawler excavators, eight wheel loaders, three crawler tractors and loaders, a pipelayer and a telescopic handler, six exhibits from the concrete technology programme, two material handlers as well as an articulated truck, a mining truck and a mining excavator. There will also be presentations about Liebherr’s service activities.

Liebherr will also display its latest developments in components for construction machinery and other applications on stand 115 in Hall A4. They include diesel and gas-fuelled engines, fuel injection systems, hydraulic cylinders, hydraulic pumps and motors, large anti-friction bearings, transmissions and electronic assemblies.

On the separate open-air stand 1003 / 2 Liebherr will display four concrete pumps from the range manufactured by Waitzinger, which Liebherr acquired in October 2012. These products will be supplied from 2013 under the Liebherr name.

Liebherr DemolitionBooth: See Liebherr above

Liebherr’s new R 946 demolition excavator

At Bauma Liebherr will introduce its new R946 crawler excavator for demolition work complying with the Stage IIIB / Tier 4i exhaust emission limits. The new machine is based on the R946 standard crawler excavator and possesses all the advantages of the standard version, including increased performance potential, greater convenience for the driver and simplified maintenance.

Special importance is attached to the integrated excavator-system technology, and ensures fast, smooth operating movements. It has the dual-circuit Positive Control hydraulic system and compared with other systems, it avoids waste of energy by reducing and in some cases entirely eliminating pressure losses. The driver senses the action of the load-dependent volume distribution principle as harmonious, natural move-ment sequences.

Another special feature of the R946 Demolition excavator is the integrated double Likufix quick-change system. The first Likufix is mounted on the end of the standard dipper stick, and forms the connection with the second dipper stick. This has the second Likufix attached to the outer end. The double Likufix enables the second dipper stick to be discarded in less than a minute, so that the excavator can perform normal dig-ging tasks with a backhoe. The excavator can also be equipped with a variety of tools, such as sorter grab, hydraulic hammer, shears or pulveriser, and in this way its operating flexibility greatly enhanced.

The R946 Demolition excavator exhibited at the Bauma will be equipped with a 4.3m long boom and a 3.3m long dipper stick. With its second, 3m long dipper stick, this special-purpose excavator can reach heights of up to 13m. A full range of safety options is available to protect the excavator against falling material during demolition work of this kind.

Rotar InternationalBooth: B3.226, B3.423/524

New range of sorting and demolition grabs

At Bauma Rotar will a new range of sorting and de-molition grabs. The new line called RG-Series will be available for excavators from 2t to 60t machines. The new range is a heavy-duty design, and the double framed main housing offers a lot of stability. The pivot areas are wide and have large pin diameters. The rotator head is driven by a Parker motor with an integrated crossover valve. The single centred cylinder is standard with a load control valve. Rotar has reduced the number of components and connections without any changes of functionality or safety.

Rotar will also launch a full range of hydraulic breakers called RHB-Series. The breakers are among the most silent on the market, the company claims. The smart design and innovative construction, with only two moving parts, offers a high level of availability and reliability. The central lube reduces downtimes and provides optimal lubrication during operation. The smart design of the sizes up to RHB 220 does not need any side bolts. The power control RHB 260 enables to set the breaker characteristics according to the application. The hydraulic breakers are available for carriers from 1t to 70t.

The demolition and scrap shear attachments are avail-able in more sizes. Rotar has experienced great benefits on fuel savings on the carriers with the updated infra-structure of their larger attachments. Reducing back pressures, temperatures and fuel consumptions are the main features.

Rotating Pulveriser

RDP-Series: Rotar completed recently the range with two further sizes the RDP 20 S and the RDP 42 S.

Rotating Combi ShearRDC-Series: Rotar completed the range with

the RDC 20 S and the RDC 42 S.

Rotar Scrap Shear

RSS-Series: A new size RSS 20 with a weight of 2.5t is now available.

RSS 40_01 RDC 32 S Gamma 1.75

RG 22-NRDP 32 S Gamma 1.75


‘D’ models. There is a clear trend towards boreholes with greater diameters and depths and attachment drills for hydraulic excavators that are able to produce such holes are in great demand. The AB4600T, which will be shown at Bauma, is the most powerful model and replaces the AB4000.

Wimmer arbor bole grapple handles timber without damaging the bark

For more than 20 years, grapples from the German company Wimmer have been extremely popular with excavator operators. While the first grapple was designed for demolition and sorting tasks, it was soon widely used as a stone grapple. To make the grapple suitable for the handling of timber in the agricultural and forestry sector, Wimmer initially offered a special accessory kit prior to developing its first timber and pipe grapple known as the Octopus and can be equipped with an optional hydraulic saw.Over the last two years,

In 2011, Wimmer developed the Arbor grapple specifically for handling of timber.

This was designed in response to

feedback from cus-tomers looking for a tool to move large amounts of round wood in the short-est time possible. In addition, the tool had to cause

as little damage to the bark as possible. The arbor

bole grapple therefore features extra large grapple cross-sections that cater for large load volumes. The rigid grapple allows for faster work than is possible with a weaving joint grapple. The load can be brought into a horizontal position without the need for balancing. The contact area of the shells has been optimised to protect the surface of the tree trunks.

Wimmer offers two compactors withadjustable amplitude

There is a strong trend towards compactor attachments for excavators as they can be controlled directly by the excavator operator. This helps reduce the risk of injury, which is always considerable where workers need to stand in ditches and trenches while machinery is in operation nearby. In addition, attachment compac-tors are much more powerful than manually guided compactor plates.

While this is generally an advantage, the compac-tion force applied to the ground can cause damage to nearby structures. While this problem can be avoided by using a number of different compactors, Wimmer in 2010 launched two compactors with adjustable amplitude. The amplitude is adjusted by means of an electrical signal from the cab, so that the compaction energy can be reduced by the push of a button by 50%.

tion and focus on important factors, such as safety, cost of ownership, production, environmental care and quality of finished task.

There will be an operator competition, oil and gas pipeline demonstration and site preparation and road building displays. Volvo president Pat Olney, will host an international press conference during the show, in which he will highlight trading conditions, introduce new products and outline the company’s future plans.

Volvo will be joined at Bauma by sister companies Volvo Penta, which is presenting its own advanced solutions to meet the requirements of the forthcoming EU and US emissions legislation, and Volvo Trucks, which will show its latest generation of construction focused vehicles.

Wimmer InternationalBooths: A6.107

Wimmer to show new attachments for the AB2300 for greater depth and larger diameters

At Bauma in 2010, the German company Wimmer Felstechnik launched its AB2300T attachment drill and was based on the previous AB3000T. The unit was available in three versions with different torques. The standard model is the perfect solution for blast hole drilling. The T12 unit is used for anchor drilling, while the T20 model offers the greatest torque.

Over the last two years, Wimmer has developed an attachment for rotary drilling with down the hole hammers. This DTH technology allows for perfectly straight drilling to great depth and for significantly larger diameters. The greater the drill hole diameter, the higher the forces acting on the drilling unit. To cater for this, Wimmer developed the AB 2600T model based on the AB2300T.

Drilling units designed for rotary drilling, with DTH hammers, are equipped with powerful rotary mo-tors. The impact is produced by a separate, pneumatic drilling hammer. These drilling units are marketed as

Trevi BenneBooth: B3.303/304

Large bucket to be shown

At Bauma Trevi Benne, from Vicenza, Italy, will show a large bucket for the HitachiI EX 3600 mining excavator in Hall B3 stand 303/404.

This T.100 HDVX class bucket weights 24t, is 4m wide and has a capacity of 22m³. It is equipped with the new ESCO Nemisys Lip System and the first unit has been sold to an Australian company, which will use it in a gold mine. The whole bucket is made from Hardox 450, except for the 140mm thick blade and the side cutters which are made of Weldox 700. It has additional internal and external reinforcing bands on the bottom, on the in and outside, and with the addition of inserts made of hard composite material on the sides and on the cutting edge.

The HDVX bucket has been designed for heavy duty and is suitable for extreme conditions, such as mining and quarrying, demolition, excavation and loading of highly abrasive materials.

VolvoBooths: C4.319/719, C4.321/721, C4.723,

F5.512/514Volvo to offer non-stop, interactive show of it’s

complete product range

Volvo Construction Equipment’s indoor stand 319/719 in Hall 4C and outdoor stand at 512/514 at Bauma will be a non-stop interactive performance of the company’s complete product range.

New products will include the ECR25D, ECR58D and ECR88D short radius compact excavators and the P6870C asphalt paver. The high-reach EC480D demoli-tion excavator will also be on display. There will also be a clutch of supporting Volvo-branded attachments, such as a new range of excavator buckets, a comprehensive selection of tools for the company’s C-Series skid steer range and a new hydraulic breaker range for backhoe loaders and compact excavators.

The Volvo City concept embraces the entire prod-uct and service portfolio in one arena. From extracting raw materials, creating roads, installing utilities and infrastructure Volvo has the haulers, excavators, wheel loaders, pipelayers, utility machines and road equipment needed for projects.

The Volvo exhibition spaces will have machines ar-ranged by customer use and application, demonstrating how products are designed to work together as a total solutions provider. These areas will cover applications such as quarry and aggregates, utility and road construc-

For optimum efficiency, these compactors can be com-bined with an automated Wimmer quick change system that ensures the electrical connections to the attachments are established automatically.

WirtgenBooths: F10.1010, F10.1011/1012,

F11.1110/1, F11.1111/129 new products to be introduced

The four companies within the German Wirtgen Group, Wirtgen, Vögele, Hamm and Kleemann, will demon-strate their place in the road and mineral technologies business segments at Bauma by introducing 29 new products among the 90 on display.

With six world premieres, Wirtgen is ringing in a new era in roadway construction with two new cold recyclers and soil stabilisers, as well as slipform pavers. Wirtgen will be complemented by Vögele with 11 road pavers and extending screeds from its new dash 3 range.

In addition Hamm will premiere new vibratory compactors and tandem rollers in the H, HD+ and HD CompactLine product families, while Kleemann will introduce the new Mobicat Evo line of mobile jaw crushers, which the company claims will set new standards in the contractor market.

Xcentric RipperBooth: FGN.N831/3More Xcentric Rippers

Since the of the launch of the Xcentric Ripper at the last Bauma in 2010 over 300 units have been sold worldwide. At this Bauma six new models of the Xcentric Ripper will be on display at stand 831/3 in the outside area F8.

Specialist demolition contractors have started to apply the Xcentric Ripper in areas where noise is an environmental issue. On several demolition projects production volumes have been doubled compared with traditional techniques. Especially on under-water demolition jobs large improvements could be achieved. Also applications for slack-removing and slack-recycling at steel mills and garbage incinerators have been suc-cessful in applying the Xcentric Ripper to move the slack material.

In small stone-quarries or quarries, where drilling and blasting is no longer permitted for environmental reasons the Xcentric Ripper is the only acceptable and economical alternative in use.

The standard Xcentric Ripper product line is now completed with nine models to suit excavators from 8t to 150t with the XR 10 weighing 900kg up to the XR 120 at 13.5t. Special custom made versions can be produced for large mining or dredging projects for excavators up to 600t.

Yanmar Europe

Booth: FGN.N1020/5, A4.415/514Yanmar’s Tier 4 diesel engines

Yanmar will have its new water-cooled diesel engines on show at Bauma on stand A4.415/514 complying with the latest Tier 4 emission levels for non-road diesel engines under 56 kW, The California Air Resources

Board certified diesel engines are the cleanest industrial

range available in the market, the company

claims. Yanmar, which will display

t h e 3 T N -V 8 0 F, 4 T N -

V88C, 4TNV86CT and 4TNV98C engines, is be-

lieved to be the first manufacturer to have been certified by CARB for diesel engines in the 19-56kW range in compliance with the latest Tier 4 standards. Simultane-ously, Yanmar received Tier 4 compliance certification from the US Environmental Protection Agency.

Yanmar also has a new electronic control diagnos-tics service system, called SMARTASSIST-Direct. This system monitors the engine operation condition and provides customers with high-quality service. Its features include easy downloads of ECU software, automatically retrieved technical information, operations monitoring and quality service information data. A remote moni-toring system, SMARTASSIST-Remote, to confirm the real-time engine running status and offer timely technical services is to be introduced shortly.


Exhibitors Booth No.ADAMAS B.V. A1.225Akerströms Björbo AB A6.102AALLU Deutschland GmbH F7.N718/1ALLU Group FGN.N718/2Aquajet Systems AB A1.119Arden Equipment SAS F6.615/11Ashine Diamond Tools C1.515Astec Industries, Inc. F11.1111/5Atlas Copco MCT GmbH F11.1108 Atlas Diamantwerkzeuge A1.301Atlas Maschinen GmbH F7.710/711Atlas Weyhausen GmbH F8.808/1AUSA F8.808/2Avant Tecno Oy F5.513BAIER, OTTO A1.132bC India 2014 EW.19BLASTRAC A1.227Bobcat F6.612/3Bonfiglioli A4.117Braun Maschinenfabrik A1.213Breaker A1.203BROENDUM A/S, V. A1.232BROKK AB A1.134BROKK AB F6.613/1Cangini Benne s.r.l. B3.219/316Caterpillar S.A.R.L. B6.106/406CDS Concrete Curing B1.134Cedima GmbH A1.335/434COMAC AG FGN.N623/10Water Blaster Equipment C2.108Comer S.p.A. A1.302CONEXPO-CON/AGG 2014 EO.14Conjet AB A1.418CORAZZA Srl B5.309CORIMAG S.r.l. B3.421CUTS DIAMANT SRL A1.118D-TEC FGN.N815/1DAE HAN TUNGSTEN.INC C4.403D DARDA GmbH F6.613/1Demarec B.V. F6.613/1DemcoTechnic AG A1.329Diamantwerk D1.424Diatip, Midhage, AB A1.120DIECI S.r.l. F10.1007/1DIEWE GmbH A1.313DIGGA Ltd. C2.107A Doosan Benelux S.A. F6.612/3Doppstadt, Werner, FGN.N922/1Dustcontrol GmbH A1.539Dynapac GmbH F11.1108DYNASET Oy FGN.N1017/2Drill, Inc. C4.603F EDILGRAPPA S.r.l. A3.222EDT EURODIMA GmbH A1.403/502EHWA DIAMOND IND. A1.103Eickhoff Bergbautechnik C2.129/228Eibenstock A1.529Element Six GmbH C3.309engcon Germany GmbH F7.708/5Epec Oy A5.307ERKAT Spezialmaschinen B3.530

Exhibitors Booth No.Euroram-Rockmaster B.V. B3.531EVERDIGM Corp. F11.1106/2Dr. Fritsch GmbH A1.308Furukawa Rock Drill F6.614/4GÖLZ GmbH A1.439/538HAMMER S.r.l. C4.711Hartl Engineering & M. B2.226HD Engineering Ltd. N521/5Heger GmbH A1.428HEYLO GmbH A1.505Hilti Deutschland AG A1.410HINOWA S.p.A. A6.325HINOWA S.p.A. F11.1103/3Hitachi Construction A4.510HTC Floor Systems GmbH A1.319Huddig AB F13.1309/4Huddy Diamonds s.r.o. A1.108Husqvarna Deutschland A1.127/226Hycon A/S F9.912A/2Hydraram B.V. FGN.N622/1Hydro-Tec GmbH A1.409Hyundai Heavy Ind. F8.813AICS BLOUNT EUROPE A1.411Idromeccanica Ramtec C4.135Inan Makina Sanayi Ve B4.213INDECO Ind. S.p.a. F7.709/6Indexator Rototilt FGN.N815/4INTERMAT Paris 2015 EO.1JCB Deutschland GmbH F7.713/1Keestrack Group N917/1KERN-DEUDIAM F6.615/1Kinshofer GmbH F6.613/1Kleemann GmbH F10.1011/1012KLINDEX Srl A1.513KOCEMA C4.303A KOMAC A1.115KOMATSU B5.102/302KOMATSU B5.104/304KOMATSU B5.301/400KOMATSU B5.303/402KOMATSU F5.512/3Kranlyft AB F10.1003/1Lehnhoff Hartstahl GmbH F6.614/2Liebherr A4.115, B0.1, F8.809 F8.810/811. F8.812, F8.813LISSMAC Maschinenbau A1.235/334Mantovanibenne s.r.l. B3.119MB Dustcontrol BV FGN.N831/4MB S.p.A. B5.408MB S.p.A. FGN.N832/3Messersi’ S.p.A. F10.1004/5Messersi Packaging s.r.l. C1.327MKS Funke GmbH A1.305MONTABERT SA F7.715/4MULTIQUIP, Inc. F11.1106/7Nederman Filltration B2.210NPK Europe Mfg s.r.o N1015/6Officina Meccanica C3.411BOilQuick AB F6.615/8PDI Magazine - S.C.O.P. AB A1.134Portafill International FGN.N418

Exhibitors Booth No Spräcktutrustning F10.1002/14Powerscreen F7.710/711PROMOVE s.r.l. B3.306BRamtec B3.417RELLOK cutting solutions A1.213/1REMU Oy FGN.N1016/5ROTAIR S.p.A. B3.226Rotar International B.V. B3.423/524ROTHENBERGER A1.403/502Rozzi S.p.A. FGN.N820/3RUBBLE MASTER HMH B2.230Saint-Gobain Abrasives A1.429/528SAMEP TOOLS B3.512SAMOTER 2014 EO.16Sandvik Construction F6.616/1Sany Germany GmbH N619Sany Germany GmbH N620SASE Company Inc. A1.305Scanmaskin Sweden AB A1.424Dr. Schulze GmbH A1.135Schwamborn Gerätebau A1.312Seelbach International A1.533SENNEBOGEN Maschinen. F7.712SIMA S.A. A1.117SIMEX s.r.l. B3.222SOCOMEC S.p.A. B3.406Solga Diamant Intern. A1.311Soosan Heavy Industries A3.208SoRoTo Maskiner ApS A1.208SPE International Ltd. A1.324SSAB A6.423Stanley FGN.N724/1SUPERABRASIVE Inc. A1.107TABE, S.A. Spain FGN.N815/1 Terex Corporation F7.710/711Terex F7.710A/3Terex F7.710/711Tesab Engineering Ltd. B2.121TopTec Spezialmasc. A1.310TOWER LIGHT Srl N1023/2Tractive AB A1.409Trelawny SPT Limited A1.128TREVI BENNE S.p.A. B3.303/404TRIMMER SRL A1.401Tyrolit Schleifmittelwerk. A1.129/228Volvo Construction Equip. C4.319/719Volvo Construction Equip. C4.321/721Volvo Construction Equip. C4.723Volvo Construction Equip. F5.512/514VTN EUROPE SPA B3.413Wacker Neuson B0.5, F9.909 F9.910/911WEKA Elektrowerkzeuge A1.113WIDECUT Co., Ltd. A1.124WIMMER International A6.107WLP SRL B3.415WOMA GmbH A1.231/330Xcentric Ripper FGN.N831/3Yanmar Europe B.V. A4.415/514Zeppelin Baumaschinen B6.106/406Zeppelin Baumaschinen F7.709/5Zeppelin Baumaschinen F7.709/9

Featured Exhibitors at Bauma 2013Manufacturer of the world’s largest range of Dust Suppression Systems

C O N S T R U C T I O N I D E M O L I T I O N I W A S T E D U M P S I Q U A R R I E S I R E C Y C L I N G

Learn more about the DUST FIGHTERS range and contact us on:

[email protected] or take a look online at www.dfecology.it


Anyone seeking to be successful in the concrete demolition profession would do well to remember the adage that a good workman never quarrels with his tools. Whether one invests in top-of-the-line, feature-rich products as soon as they are introduced, or makes do with bargain basement goods in order to reduce costs, it is the operator’s knowledge and skill level that ultimately determines the quality of the job and, indeed, the prosperity of the business.

But there is one outcome where a workman may often rightly place responsibility on the tools, which are his or her health and comfort. Research has found that long hours spent working with many types of demolition equip-ment contribute to a variety of injuries and illnesses, from simple fatigue and hearing loss to carpal tunnel syndrome, shoulder strains, and back issues. Even smaller, lower power handheld tools can, over time, take a toll on a worker’s health, compromising the contrac-tor’s personnel costs and productiv-ity in the process.

There is also the future to think about. As with most other construction related trades, de-molition contractors are finding it increasingly difficult to lure young workers to the profession. These youngsters have higher expecta-tions that will make them less

amenable to performing uncomfortable tasks, even for short periods, leaving contractors with the tools to perform a job, but no one to operate them. That is why ergonomics and operator comfort have become just as critical to equipment manufacturers as productivity and reliability. Many of the handheld tools in covered in this feature boast substantially reduced vibrations, comfortable grips, and cooler operation, while all

POSITIVE VIBEThe latest hand-held demolition tools tout their ability to

give their users more—and less

boosting power, speed, and versatility.So not only do operators have more comfortable

tools to work with, they end up handling them less because more work gets done faster. What is more, a comfortable operator can better focus on doing a good job, rather than the increasing pain in the hand, wrist, or joints. Comfort, productivity and quality, which nobody can quarrel with.

HammersBosch’s newest rotary hammer maximizes

productivity and reduces user fatigueBosch Power Tools brings vibration control technology to new heights with the brand new Bosch RH850VC 47.6mm SDS-max rotary hammer. The hardest hit-ting and fastest drilling hammer in its class, accord-ing to European Power Tool Association guidelines, the RH850VC boasts several features that maximize productivity and minimize wear and tear on the user.

Delivering a total of 12.6J of impact energy, the RH850VC has up to 35% more impact energy than key competitors. With a 13.5A motor generating 150 to 305revs/min and 1,380 to 2,760blows/min,

the RH850VC enhances pro-ductivity during all-day use, and allows users to get more done in less time. Drilling speed with 32mm diameter bits is as much as 44% faster than competitors, while the chiselling removal rate is up to 40% faster.

The RH850VC is the first Bosch Hammer to feature three levels of vibration con-trol. An extended air cushion design between the piston and striker in the hammer mechanism reduces vibration levels and improves impact energy and performance, while a spring-loaded counter eight tuned mass damper moves in countermotion to the hammer mechanism, further reducing vibration levels at the source. A decoupled main handle de-sign rounds out the vibration control, absorbing vibrations before they reach users’ hands. Together, these vibration con-

trol technologies provide up to 60% less vibration than the tool’s previous model, and 15% to 60% less than leading competitors.

The tool’s SDS-max bit system offers users tool free bit changes, an automatic bit lock once the acces-sory has been inserted, built in dust protection, and the maximum impact energy transfer rate. A vario-lock mechanism rotates and locks the hammer’s chisel into 12 different positions to optimize a variety of working angles while a selector knob gives users the option to select from several functions including hammer drill-ing, chiselling only or the vario-lock function.

A variable speed dial allows for controlled drilling and demolition applications, while constant response circuitry provides soft start and overload protection and maintains constant speed under load. The new hammer also includes service minder brushes that indicate when preventative maintenance is required.

Also from Bosch: the next generation SDS-plus rotary hammer

The RHH181 18V lithium-ion SDS-plus rotary hammer from Bosch features the brand’s innovative Core brushless technology package and new chiselling functionality to tackle multiple applications with one tool. The new hammer delivers the ideal combination of drilling and chiselling in a lightweight, compact size, while the brushless EC motor technology extends tool life and increases tool efficiency.

The Core technology’s brushless EC motor deliv-ers up to 30% more power, eliminating limitations of conventional motors and significantly reducing the need for tool maintenance. The motor lasts longer and runs cooler while its integrated electronics allow for superior control and protection against tool and battery damage in demanding applications.

Bosch’s RHH181 18V Li-Ion rotary hammer

Above: Bosch’s DH1020VC inline demolition hammerBelow: Atlas Copco’s LH 8E, the lightest fully vibro-reduced handheld hydraulic pick hammer

Anyone seeking to be successful in the concrete demolition profession would do well to remember the adage that a good workman never quarrels with his tools. Whether one invests in top-of-the-line, feature-rich products as soon as they are introduced, or makes do with bargain basement goods in order to reduce costs, it is the operator’s knowledge and skill level that ultimately determines the quality of the job and, indeed, the prosperity of the business. PDi’s Jim Parsons reports.

New Bosch CoolPack batteries have a unique design that incorporates advanced, heat-conductive housing, significantly reducing heat build-up while in use. This results in a more efficient battery that stays cooler and lives up to 100% longer. And with new 2Ah and 4Ah

battery options, users get up to 65% more run time.The RHH181 18V lithium-ion rotary hammer

also features a new chisel function and a Bosch-engi-neered pneumatic hammer mechanism that delivers optimal performance and chisel power. Thanks to the new Core technology and 4Ah battery, the new tool can drill more than 150, 6mm by 32mm holes in concrete with one battery charge.

The RHH181’s best-in-class size to weight ratio makes eases operation for the user and ensures neces-sary impact is still delivered. The three-mode selector switch lets users choose between rotary hammer, rota-tion only and chisel mode. Additional features include an LED work light to illuminate work areas during low light applications and large soft grip handle for reduced fatigue during extended use.

Atlas Copco launches lightest fully vibro-reduced handheld hydraulic pick hammer

Visitors to Bauma will get to see Atlas Copco’s new LH 8E, the lightest fully vibro-reduced handheld hydraulic pick hammer on the market. Weighing 9.5kg, the LH 8E is ideally suited for horizontal work in brick and concrete, both for renovations and outdoor applica-tions. A lightweight retainer gives quick tool changes in combination with low weight and easy operation.

The newly designed vibro-reduced housing, where the hammer mechanism floats in the canopy, dampens vibrations throughout the whole hammer body. This significantly decreases the vibrations transmitted to the operator´s hands and arms. Atlas Copco’s hand and arm protection system also reduces operator exposure to vibrations. The new design enables a lower vibra-tion exposure level for the operator to be achieved at a given working time.

The LH 8E also features a large vibro-reduced

Issue 1 • February - March 2013 • PDi 53


‘D’ handle with enough room for a gloved hand. The front handle provides full control and support when starting a cut, and can be indexed 360° turned hori-zontally. The handle may even be removed altogether,

with the machine’s other gripping surfaces used instead. Using the multiple grip-

ping surface, the operator may choose an optimum working position and with noticeably better dampening of the vibrations in both hands, compared with other standard hammers in this weight class.

The LH 8E will run on standard hydraulic systems providing 20litres/min flow, and is designed to run at optimum on any Atlas Copco power pack. Equipped with thin and flexible long hydraulic tail hoses and quick release flat face couplers, the hammer can easy be connected and operated by any standard power pack or hydraulic flow with controlled outlet complying with the EHTMA category ‘C’ standards.

New triple-head scabbling hammers from CS Unitec CS Unitec’s new triple head concrete scabblers ef-ficiently remove laitance and expose aggregate for the application of sealants and coatings. Three tungsten carbide-tipped pistons produce 7,200blows/min to re-duce, roughen, and texture concrete. Models 153.5200 and 153.5250 consume only 0.5m3/min and have a vibration level of 8.7Aeq.m/s. Both have a noise level of 98db(A) and weigh 5.2kg.

The tungsten carbide-tipped pistons are available with cruciform heads designed for levelling concrete and preparing cracks prior to repair, and bush heads designed for exposing aggregate for the application of coatings. An optional dust shroud removes dust when attached to one of CS Unitec’s industrial vacuum sys-tems, providing a cleaner and safer work environment.

Metabo’s new rotary hammer offers highest power to weight ratio in its class

Metabo

Corporation has expanded its line of rotary hammers to include the KHE 3250 SDS-Plus. Lightweight and perfectly balanced for overhead drilling, the KHE 3250 SDS-Plus has a 7.2A motor to provide up to 4,470blows/min at a force of 3.1J/blow, and a no-load range of 0 to 1,150revs/min. Drilling capacity of the new hammer is 28.5mm for concrete, using solid bits, 79mm for brickwork using thin wall core bits, and 12.7mm for mild steel.

This combination hammer has a large and easily

positioned three-function switch for drilling with impact, rotary drilling without impact, and chipping. In chipping mode, the chisel can be set to 12 different positions, allowing the user to position the tool for easiest operation. The 360° side handle is vibration dampened, and the rear handle offers a unique anti-vibration system that prevents vibration transference to the operator.

For improved tool life, the KHE 3250 SDS-Plus features the Metabo winding protec-tion grid that deflects air-borne debris for increased motor life, autostop car-bon brushes, a tough aluminium die-cast gear housing, and Metabo’s S-automatic safety slip clutch to help protect the operator in the event of a tool jam.

GrindersBosch revamps grinder portfolio

Bosch has completed an overhaul of its grinder line-up to deliver a comprehensive portfolio of the most versatile and cost-effective grinders on the market. In 2013, 11 new tools will be available, each focused on delivering exceptional results to meet a wide variety of user needs.

Results from the independent test agency SLG revealed that Bosch grinders outlast competing tools by as much as 60%. The key is a new motor design featuring direct motor cooling and more air vents to reduce hand blockage, extending the tool life and providing higher overload capabilities to prevent overheating. Additionally, improved carbon brushes offer more than double the lifetime of predecessor brushes, which means less downtime for maintenance.

The new grinders offer up to 2A more power than previous generation models, and feature a new patented multi-grip paddle switch and textured housing to provide increased grip options for better ergonomics and tool control. The unique multi-grip paddle switch can now be operated in the

front, middle and rear, as opposed to only in the rear on old models, allowing users to hold the grinder in any position. New grinder at the heart of Metabo’s new surface

preparation kitMetabo Corporation has upgraded its 178mm angle grinder surface prepara-tion kit to include the new W24-230 large angle grinder, as well as the stan-dard dust control shroud and optional vacuum. In addition to 17% more torque than the previous kit’s grinder, the tool offers improved ergonomics and

better airflow, making it ideal for large area concrete surface grinding applications.

The W24-230 has a rated speed of 6,600revs/min and a loaded speed of 4,600revs/min. It delivers a total of 17Nm of torque and 2.4kW of power. A 15A mo-tor extends the tool’s service life up to five times over other grinders in its class.

The new angle grinder has a simplified on/off switch with a safety lock out switch that protects against unintentional starts. It features Metabo’s VibraTech three-position side handle that reduces vibration levels up to 60%, plus an ergonomic rear handle that includes a vibration dampening system. The rear handle also pivots 90° left or right for comfort during cutting and grinding.

The 178mm dust control shroud, made from polyurethane, helps protect users from harmful debris generated in heavy-duty grinding applications and surface preparation. The shroud opens easily to allow operators to work flush against a wall, eliminating secondary grinding or finishing of corners and hard-to-reach spots. Molded vacuum ports in the shroud enable vacuum connections for 57mm internally and 63.5mm externally. A punched relief hole in the shroud prevents vacuum lock.

When used with an optional vacuum, such as Metabo’s ASR 2050 vacuum, the surface preparation

kit helps eliminate silica dust exposure in accordance with US Occupational Safety and Health Administra-tion regulations, ensuring added safety and protection. The ASR 2050 features a soft start, easily changeable pleated polyester filter cassette, automatic filter clean-ing, extra large rear wheels and industrial front swivel casters for easy manoeuvrability.

New angle grinder from Metabo lightweight and At World of Concrete, Metabo introduced a new lightweight, ergonomic angle grinder designed for ap-plications using AC/DC power sources. The W1080 RT 127mm angle grinder, also known as the Rat Tail because of its handle design, fits comfortably in the user’s hand and features a rubberized grip that dampens vibration and increases slip resistance.

The W1080 RT features a high overload capacity 10A motor with 1.08kW of power, 3Nm of torque, and a no-load speed of 10,000revs/min. The new grinder has a low profile aluminium die-cast gear housing that facilitates heat dissipation and increased tool life. Weighing just 2.4kg, this new angle grinder is perfect for applications that require reaching or overhead

Slide Switch Grinders

Model Size/Type Motor Size (A) Revs/Min

AG40-85 114mm angle 8.5 11,500

AG50-10 127mm angle 10 11,500

AG50-11VS 127mm variable speed 11 2,800 - 11,500

AG60-125 152mm high-performance cut-off/grinder

12.5 9,300

Paddle Switch Grinders

Model Size/Type Motor Size (A) Revs/Min

AG40-85P 114mm angle 8.5 11,500

AG40-85PD* 114mm angle 8.5 11,500

AG40-11P 114mm high-performance angle

11 11,500

AG40-11PD* 114mm high-performance angle

11 11,500

AG50-11VSPD*

127mm variable-speed angle

11 2,800-11,500

AG50-125PD*

127mm high-performance angle

12.5 11,500

AG60-125PD*

127mm high-performance cut off/grinder

12.5 9,300

*no lock-on paddle switch

CS Unitec’s triple-head concrete scabbler

Metabo’s KHE 3250 SDS-Plus rotary hammer

work. Its slim motor housing design and ergonomic side handle make the grinder comfortable, safe and easy to use throughout the day.

The W1080 RT includes a non-locking trigger switch, spindle lock, burst-proof wheel guard, and auto-stop carbon brushes, further ensuring a long tool life. Standard features include a Type 27 wheel guard, inner flange, face spanner, and an outer nut. A Type 1 cut off wheel guard, carrying case and a variety of abrasives for the grinder are sold separately.

SawsThe new Husqvarna K 760

With the launch of the new Husqvarna K 760, Husqvarna takes another step toward increased user-friendliness. Optimised engine performance, enhanced starting and ergonomics are just some of the areas that have been improved on the new K 760. The newcylinder is designed to increase the power cutter’s ca-pacity. Due to the cylinder and an additional cooling fin, emissions have been reduced by 15% compared

to the previous model. This ensures optimum operating temperatures

and it makes the machine less sensitive to climate variations.

The digital ignition system for the K 760 engine offers better starting and also makes the engine run smoother. This leads to very low vibrations, <2.5m/s2, which significantly reduces the strain on the user. The integration of the fast idle lock in choke is another improvement that makes start-ing easier.

Ergonomics have also been i m p r o v e d with the new K 760. The new, lighter blade guard, made of magnesium gives the cutter better bal-ance and provides variable guard adjustment. The new blade guard includes a reversible blade bushing that allows easy switching between blades with different centre holes. One improvement that increases usability and dust control is the new wet cutting kit with a progressive valve. It is easy to set the exact water flow for each application, which minimises waste and slurry.

The new tank ventilation ensures optimum air supply to the fuel tank and at the same time prevents dust from getting in. Together with the heat resistant rear belt cover, this provides operators with maximum operating times and extended product life.

The new K 760 also hosts a number of features from the previous K 760 model. These include a low

emissions X-Torq engine, the active air filtration filter cleaning system and SmartCarb, the advanced carburettor, which automatically controls fuel/air mixtures to always give the engine maximum power.

The K 760 is an all round machine and well suited to most indoor cutting jobs as well as cutting concrete and stone when carrying out ground work, renovations or new production. It is

also perfect for cutting smaller holes, as well as pipe, asphalt and metal cutting.

New innovative HF saw from HusqvarnaHusqvarna is also launching a new high frequency

platform (see pages 43-44) and the new range includes the electric power cut-ter K6500 that is able to adapt to the

electrical power supllied. It works just as good on

3 or 1 phase. Hu s q v a r n a has at press

stop of this issue not release that much information on the new cutter but we hope to publish more infor-mation in the PDi Bauma show issue. Another new product is the new HF drill motor DM650 that is optimized to the new HF platform. More information on DM 650 in the coming issue of PDi.

Dr. Schulz takes handsaws to the next levelDr. Schulze will present the new DRS-TS 400 handsaw at Bauma. The TS 400 was developed in close coopera-tion with professional users and their experiences and needs. The 9.5kg saw’s extremely light weight is the result of the innovative design. In combination with the attached adjustable and ergonomic handle, the saw permits an effective, fast and power saving work. A frequency converter, with integrated automatic

Metabo’sW24-230

large anglegrinder (left)

Metabo’sASR 2050 optional

vacuum (right)

Husqvarna K760 saw

Husqvarna’s new high frequency K6500 electric power cutter

Metabo’s W1080 RT127mm angle grinder


detection, allows the saw to be operated on either a 230V or 400V electrical network. The water-cooled high-frequency motor delivers 3.7kW with 230V, and 6.5kW with 400V. The maximum cutting depth

is 165mm with a 400mm diameter blade. The TS 400 combines an integrated

water supply through the spindle with a ball-valve bypass sys-

tem to allow dry cutting

without overheating the engine. The blade guard is infinitely adjustable. A screw fastener on the blade protection guard makes cutting blade replacement quick and easy.

Makita’s EK7651H is world’s first four stroke power cutter

The K7651H, a 355mm power cutter is the latest ad-dition to Makita’s extensive range of concrete power cutters. This new 30kW four-stroke engine eliminates the need for oil mixing, simplifying operation and preventing engine failure due to improper mixes. The saw is also quieter, has a smoother idle for continuous operation, and limits fuel consumption to less than

1.69litres/h. A three-ring piston, improves engine du-rability, which is further enhanced by reduced exhaust and intake carbon build up.

A no load speed of 9,350revs/min enables the K7651H to take on the most demanding applications. Other innovative features include automatic decom-pression valve that reduces pull-starting force by 40%, and an integrated wheel kit that retracts when not in use. In addition, the EK7651H has a five-stage foam-paper-nylon filtration system with direction airflow to provide cleaner air for improved engine durability.

Darda tools delivery efficiency down underIn quite an unusual demolition project, the profes-sionals of the TAI Taucher, Atemschutz, Industriear-beiten (Diving, Respiratory Protection and Industrial Works) demonstrated the efficiency and advantages of the 31kg Darda splitting cylinder C 12 N and the DEMCO TECHNIC AG

Gewerbepark Oholten 23 • CH-5703 Seon, Switzerland Phone: +41 62 769 6220 • [email protected] • www.demco.ch

UNICUT© - ServoDrive wire saw• Incredible 0-25m wire storage• Highest torque with UNICUT©-winding system• No interruption for wire storage expansion• Automatic wire twisting

Visit us!www.bauma.de/enHall A1, Stand 329

combi-shears HCS 6 C. The setting was a 20m x 20m underwater building pit, where old concrete structures were recovered from 8m underwater by means of these handheld demolition tools. The concrete foundation piles, 2.5m long, and 1m diameter, as well as remains of the reinforced foundation, had to be removed as gently as possible, as vibrations or concussions might have caused damages to adjacent buildings. Equally critical were economics. Time is always money, after all, especially with special, unconventional demolitions.

Several demolition techniques were considered and quickly rejected. Pneumatic demolition ham-

mers, as they suffer from a loss of power of 0.1bar/m of water depth, hydraulic demolition

hammers, and as wire sawing were all deemed too time-consuming. Site conditions pre-cluded the other heavy demolition tools. As a result, a coordinated solution of hand-held demolition tools emerged as the ideal

solution. A diver began the process by carrying out horizontal core drilling at the predetermined breaking points of the concrete parts to be demolished. He then inserted the splitting cylinder’s wedge set, consisting of a wedge and two counter wedges, into the drilled hole. During the hydraulic operation the wedge pushes itself against the counter wedges, pressing them harder and harder against the inner wall of the drilled hole.

Thanks to a splitting force of 3,507kN, the Darda splitting cylinder C 12 N split both conventional concrete and reinforced concrete within seconds. Con-nected to the hydraulic power unit at the surface via long hydraulic hoses the splitter broke the concrete structures in the building pit exactly at the height of the boring, and widened the material until the reinforcing r o d s either broke or were exposed.

The remains of the foundations with 6mm to 12mm diameter steel re-

inforcements were then tackled by the small 14 kg hydraulic combi-shears HCS 6 C. With its shear set and a cutting force of 214kN, this device can easily cut steel reinforcements and round steel bar up to 18mm

diameter. When opening the shear set, a high breaking force is achieved

to quickly split concrete. With the help of the HCS 6 C, the diver could

cut through unbroken steel and, when possible, further push the concrete apart to

gain better access to the reinforcements.Severing the reinforcements using Darda’s HCS 6

C proved to be significantly faster and safer than using hydraulic angle grinders due to the latter tools’ rota-tion, and limited underwater visibility around the work area. Likewise, burning through of steel reinforcement is a complex, ineffective, and relatively unsafe process.

After each splitting and severing process, a crane lifted a total of 30m3 of demolished parts from the deep water. On land, the concrete could then be fur-ther crushed for transportation with the splitter and the combi-shears.

Including all preparatory and follow-up work, the demolition was finished in 16h over two days. This was only possible in so short a time because the demolition professionals of the TAI in Falkenhagen competently applied the tools best suitable for the task. The company confirmed that the hydraulic Darda split-ter did more than simply save time. In terms of safety and handling, especially in the case of underwater demolitions, there are no competitive alternatives to controlled splitting.

Dr. Schulz’s DRS-TS 400 handsaw

Makita’s EK7651H world’s first four stroke

power cutter

Darda’s 31kg Splitting Cylinder C12N and Combi-Shears HCS 6 C used for the underwa-ter demolition water pit project to remove old

concrete structures from 8m underwater.


Bauma China has grown from being a Chinese meeting point for Chinese and international manufacturers seeking a partner in China to being an increasing gateway for reaching the Chinese and other Asian markets. Just ten years ago it was much more difficult to sell to Chinese building and construction con-tractors, apart from a few big companies that were government controlled. And the bureaucracy was horrendous, which made negotiations take a very long time. The almost one million small often one-man contractors had no means to invest in expensive equipment. Foreign manufacturers were more concentrated in setting up production plants in China in order to better compete in the global market. But now things are changing fast. Bauma China last year was a good example. More then 180,000 visited the show and 154,000 came from the domestic Chinese market.

Husqvarna with 80%market share

Husqvarna Construction Products has been present with their own plants in China since 1995. The manufacturer

has today two plants, one in Xiamen, one in Shijiazhuang in the province of Hebei which is in the Nothern part of China. “It was difficult to enter the Chinese market in the beginning. No doubt about that. We tried to sell our whole range, but our feeling was that we needed a niche product to actually get in to the market. And we found it. The niche product became our popular power cutters. But it was not the construction industry that embraced them first. It was the rail and rescue industry,” said Segers.

Husqvarna now dominates this industry in China having about 80% market share of the hand held power cut-ter market . “We try to be a supporting partner to China when different types of catastrophes occur, providing our products and support. In some cases we have even been on the spot before the

Chinese army,” said Segers. With such a strong foothold in this industry, it be-came easier to enter other niches related to the Husqvarna product range and to establish product and service centres throughout the country. Segers says that they now have service centres in Beijing, Shanghai and Xiamen, besides a wide range of servicing dealers throughout the country. Thanks to the network of product centres, Husqvarna has been able to find and reach the heavy users in con-struction, and has become an important player in this market as well.

A growing demolition industrySegers says that much has changed in the construction industry, which has helped sales. Before there were many small con-tractors in concrete sawing and drilling and demolition. In terms of demolition

there are a big number that now work nation wide. Several of them have over 100 employees. There is also a national demolition association with over 500 members with office in Beijing. Regula-tions and environmental laws are also stricter. Before almost any construction company could tear down a building. Now a license is needed, anyway for larger demolition projects in the cities.

The Chinese construction market is in strong development and a lot is expected to happen in the coming years. For a couple of years it has experienced a slow down due to over heating of the market, but analysts believe that in 2013 the market will start showing increasing numbers again. The forecast for invest-ments in infrastructure for 2013 are some Yuan 800bn. A strong advantage for China’s position on the global market

Foreign brands grow in popularity in ChinaHusqvarna Construction Products has been present with their own manufacturing plants in China since 1995. But it has taken time to become a considerable supplier to the domestic market. “But now we see a clear opening in to the Chinese market,” said Husqvarna Construction Products China MD Marc Segers, speaking at the recent Bauma China exhibition.

has been low labour costs but is about to change fast. This will affect prices on products produced in China but also boost consumption. In recent years, salaries have gone up by an average of 10% per year in China. “As labour costs are going up, more labour intensive work will be replaced by equip-ment and as companies are making more money, I see a good chance for us to increase our sales. Previous Chinese made products were much less expensive, but also with much lower quality than our products. Today Chinese companies have a bigger interest in foreign brands and that is good for us. We will maintain our quality level and strongly promote our products as Swedish, which stands, also in China, for quality, and for reliable, ergonomically and environmentally friendly products, all features that are gaining importance when purchasing construction equip-ment,” said Segers.

Finding the heavy usersHusqvarna sales and marketing manager

Husqvarna Construction Products China,

managing director, Marc Segers

From left: Husqvarna Construction Products China managing directior Marc Segers, Husqvarna Construction Products marketing manager Helen Thiel, and Husqvarna Construction Products China sales and marketing manager Lawrence Liu

in China, Lawrence Liu, says that he sees great potential in the Chinese market for Husqvarna. “We are slowly building our sales of wall and wire saws in the heavy user segment. These types of equipment are still rather rare in China compared to drill systems and our products are efficient and hold a very high quality level,” said Liu.

It is still hard to convince the Chi-

nese to use remotely controlled demoli-tion robots and sales are rather weak. “The Chinese market is not yet ready for this type of demolition machine, but it will come,” said Liu.

In floor grinding equipment Husqvarna has seen an opening and an increasing interest for grinding and pol-ishing concrete floors and their machines are appearing more and more in China.

Liu says that there is good potential for big and small floor grinders, but imple-mentation is slow. Epoxy flooring is dominant and it is a question of spreading the message of the benefits of floor grinding and pol-ishing. Seger says that they are estimating that there are some 2,000 flooring com-panies in China, so there is a huge potential.

Training is a key to help the market grow faster. Training courses about the benefits of Husqvarna ma-chines and how they should be used is very important. Then users can see what they can gain. Husqvarna regularly holds training classes at their plant in Xiamen in concrete cut-ting and drilling, remotely

controlled demolition, concrete floor grinding and polishing, as well as how to use their power cutters. Besides training Husqvarna will continue to increase the number of distributors and service cen-tres nationwide as well as offering train-ing in more locations. Later this year PDi will report on the activities of Husqvarna Construction Products in China.


What is new in GPR technology? A quick look at Hilti’s Ps 1000 X-Scan GPR

PDi has previously reported on the cost and time saving benefits for demolition contractors using concrete subsurface imaging services with ground penetrating radar technology. PDi’s Mikael Karlsson reports on the latest trends in GPR.

Ground penetrating radar is a radar based technology that uses antennas to transmit and receive pulses of electromagnetic energy through a medium such as the ground or concrete to image the subsurface. With GPR it is possible to mark a cutting or drilling location, for example, in a wall or floor before performing cutting and coring work. The technique can also locate steel reinforcement, cables, electric conduits, embedded plumbing and water pipes.

There are currently five manufacturers of GPR equipment in Europe, North America and Japan that offer products worldwide especially adapted and suitable for demolition applications. These companies are Malå Geoscience, Geophysical Survey Systems, Sensors & Software, Japan Radio Company and Hilti. In addition, there are a handful of local demolition contractors in Japan, North America and China, that have developed their own in-house GPR equipment that they also sell, but not on the international market.

Hilti’s GPR equipment the Hilti PS 1000 X-Scan, is especially adapted for the concrete and demolition industry. This product produces large-area images of what is inside concrete structures. The system consists of a hand guided scanner with colour display, a portable monitor unit for on site use, plus computer software for image evaluation and data management. With the ability to provide clear 2D or 3D images of all kinds of objects concealed in concrete structures, the Hilti PS 1000 X-Scan Radar Detection System takes non-destructive inspection of concrete to another level, the company claims.

Further to this, GSSI recently announced some new features for Radan for the easy to use StructureScan Mini. Radan for StructureScan Mini is a post processing software package for the StructureScan Mini Series. It is designed to process, view, and document 2D and 3D data collected with the StructureScan Mini and StructureScan Mini HR. The software features bold and intuitive menu screens and clear data views for easy in-terpretation and enhanced post processing capabilities.

Considering the severe business climate around the world that is impacting construction and demolition companies, what are the potentials of GPR technology?

“In the long perspective I am optimistic,” said Malå Geoscience representative Christer Gustafsson. “Today sales of our GPR CX concrete imaging system are going rather well in the USA and Australia today. We know this is mostly driven by legislation where assurance and juridical issues can demand huge compensation and

sooner rather than later. This can become an issue if there are unexpected damages and delays. We also know that this stricter legislation will, sooner or later, also develop in Europe and other parts of the world. And when this is a fact there will certainly be a need to do cutting and drilling work even more efficiently as pos-sible from the very beginning to avoid huge prejudices.”

Geophysical Survey Systems’ StructureScanTM Mini HR (right) and StructureScanTM Mini (bottom) ground penetrating radar systems

Hilti’s PS 1000X-Scan radar detection system (left) and the PSA 100 (right)

The EM system overlapped with the ground penetrating radar

and post-tensioning tendons, metal or plastic pipes, electric cables, glass fiber cables and cavities – at depths of up to 300mm / 12 in and even where layers overlap.

In addition to its radar sensor array, the system now also incorporates an additional sensor array capable of detecting electric current. The improved PS 1000 X-Scan thus not only detects concealed objects, it also clearly identifies live electric cables, thereby greatly increasing safety as well as saving time and money.

Immediate analysis of the scans is possible as the objects are shown in 2D plan views or cross-sectional views directly on the X-Scan display. With the aid of the PSA 100 monitor, scans of objects can be shown as 3D images for even easier on-the-spot interpretation.

This makes it easy to find and mark reliable drilling, coring or sawing locations and, thus, avoid costly damage and lost time due to hitting rebars, pipes or cables. The position of reinforc-ing bars, baskets and tensioning tendons can also be easily found and marked immediately or, alternatively, the data can be recorded for precise analysis and archival back in the office.

Over the last year there has not been any really exciting new GPR product launches since the last report. Interesting to mention again though is that Hilti has launched a GPR system that is especially adapted for the concrete and demolition industry, the Hilti PS 1000 X-Scan.

“The system has been extremely well received. The fantastic imaging capabilities of the system strongly increase the productivity of our custom-ers,” says Dr. Martin Gödickemeler, Head of Hilti Diamond Tool Systems.

This product is designed to produce large-area images of what’s inside concrete structures. The system consists of a hand-guided scanner with color display, a portable monitor unit for on-site use, plus professional PC software for image evaluation and data management.

With the ability to provide clear 2D or 3D images of all kinds of objects concealed in concrete structures, the new Hilti PS 1000 X-Scan Radar Detection System takes non-destructive inspec-tions of concrete to another level, according to the company.

Capable of detecting not only steel reinforcing bars, this radar-based system also locates pre-


Ashine Success at WOC

The Dutch replace history in Azerbaijan

High-performance dust suppression for Midwest demolition firm

In Baku, the capitol of Azerbaijan, the Dutch company Bresser is working on a challenging project. The city centre is humming with building activity and to preserve the historic soul of the city a lot of old buildings are being renovated instead of being torn down and replaced with tall structures.

A new centre ring road is being built along Fuzilistreet and a historic building is directly on its route. Bresser was asked to come up with a method to move this 100 year old structure in

one piece 10m backwards to make way for the new four lane ring road. Their plan was successful and Bresser was awarded the contract.

The structure is made of sandstone from 500mm to 1m wide blocks weighing up to 200kg. To move the building the 1m thick base-ment walls were to be cut in sections of 1.54m wide and 1.75m high. These sections will then be replaced by a top and bottom concrete beam with hydraulic jacks positioned in between on sliding beams. Once all hydraulic jacks are in place the

building will be slid to its new position.For this method 3,500m of cutting was

required in the basement walls. Bresser relied on the Dutch diamond tool manufacture Adamas who selected a hydraulic chainsaw with 630mm cutting bars and a guiding rail to be the best option for this project. To avoid exhaust fumes in the basement the chain saws were driven by 11kW electric power packs. The project is running to plan seven 7 days a week and is scheduled for completion in April 2013.

In the US one of the Midwestern states’ demoli-tion firms Veit has added high-performance dust suppression equipment from Dust Control Technology to its range of capabilities, after renting the equipment on several occasions to gauge its effectiveness under normal site condi-tions. The company reports far better control of dust generating activities than spraying with large hoses, as well as significant labour savings by eliminating manual suppressions.

In addition the new equipment improves workplace safety by allowing employees to position the atomised misting unit closer to

danger zones, where the unattended machine can operate without risk of personal injury from heavy equipment or falling debris.

Veit has been a demolition industry leader for more than 80 years, providing complete demolition services, including explosive and interior projects. The firm has pioneered the art of “surgical removal,” with selective demolition and high-risk projects among the company’s specialties.

“The DustBoss is a great option on both large and small scale demolition projects, from 150m tall smoke stacks to small ranch houses,” said Veit

demolition general superintendent Ryan Olson. “For us, there are several benefits. Protecting nearby inhabitants and local environments is key, and the DustBoss is much more effective than other measures we’ve tried. The labour savings also allows us to concentrate our employees on core activities. It’s simple to wheel it into place and aim it, and it works all day and allows us to keep employees further from the demolition work for greater safety. We also receive fewer dust related complaints, and have even received compliments from property owners and city officials who’ve seen the equipment in action.”

At the recent World of Concrete show, Ashine welcomed clients to its booth to discuss the current trends in concrete floorings and to learn about the company’s diamond tools that offer a total solution for surface preparation, concrete/terrazzo grinding and polishing.

At the show Ashine introduced new products, the Generation IV Resin Pad, A-PAD series and tool box aimed at solving the most up-to-date concrete problems.

A few days before WOC, a US distributor tested Ashine Generation IV Resin Pad (50#-800#) on his test floor with great results. No swirls, very good clarity, shining by just one pass and a gloss meter reading average of 55.

The A-PAD series, for high-speed burnishers, buffers and auto-scrubbers attracted atten-tion. The series includes A-Pad Hybrid, A-Pad Resin and A-Pad Impregnated. A-PAD is used to achieve high shine and for daily maintenance, and is an ideal choice for new floors, wavy floors and dye and polish.

Ashine has also developed a tool box to make the contractors work more convenient. The tool box, designed like a safe box, is used to keep the diamond tools. www.ashinediamondtools.com

Weka expands SR Drilling Machines

Weka has enlarged the series of SR machines with new developments, the SR38 and SR68, and the SR75 has been expanded to keypad and display.

The SR38 is the follow-up model for the SR35. It is a machine with 3.7kW power and three speed gear. It also has six motor steps, so that it offers 18 speeds with an extremely wide drilling range.

The SR68 is now available in the 7.5kW power range. This machine also has a three speed gearbox like the SR38, but is fitted with a 7.5kW motor with six motor steps. This diamond core drill has been developed for deep holes on small and medium size drilling diameters.

The SR75 has been fitted with the same keypad and display, which are already used on SR25, SR38, SR65 and SR68. Also the speed range of the mo-tor has been extended to four steps. Together with the three speed gear the SR75 offers 12 different speeds.

In all SR machines an error display and data analysis has been integrated. This special feature supports the operator as well as the service technician. A big advantage of the data analysis

is the easy reading of the operating hours. Additionally there is now also the new au-

tomatic feed BA50 available. This feed system is completely integrated in the SR machines. So there is no additional case and cable. It is very easy to assemble and also easy to handle. It is fitted with an intelligent electronic system and drilling up to a diameter of 500mm is possible.

Weka products will be on display at Bauma on stand 113 in Hall A1 and demonstrated outside in area 01A 19.www.weka-elektrowerkzeuge.de


Full potential of core drilling yet to be tapped

The concrete cutting industry awaited 2013 with a feeling of hope mixed with apprehension. On the upside, Bauma is expected to have its usual galvanizing effect on the languishing construction market. The downside is that the economic situation in Europe remains uncertain, with some of the markets coming to a standstill, and this might have serious ramifications for players. That said, the first two months were promising, and the hope is that the year will continue to fold in the same direction.

Among concrete cutting techniques, core drilling is the one with the biggest untapped potential as far as product development is concerned. Such is the professional opinion of head of the concrete sawing division at Braun Maschinenfabrik Siegfried Uebleis and one of the industry’s living legends. While wall sawing equipment is already stretching its capacity limits, there is still enough room for improvement in core drilling. According to Uebleis, the most immediate task that engineers are facing is how to increase peripheral speed of the core bit. While the industry is waiting for a solution, PDi reports the latest news from the core drilling segment.

Weka and Pentruder go for automatic feed

Weka and Pentruder, the trendsetters in the drill motor technology, have upgraded their machines with automatic feed units. Weka’s is called BA50 and it is now an integral part of the manufacturer’s

SR range. The unit is fully integrated in the drill motor, with no need for a separate case or cables. Fitted with intelligent electronics, it permits efficient drilling within a diameter range of up to 500mm. Pentruder’s automatic feed unit has been designed to further enhance performances of the existing MDU Core Drill-NTGRA system. Installed between the housing and the track, the automatic feed unit communicates directly with the drill motor to reach optimum working parameters. Any model from the current Pentruder range can be modified for automatic feed unit operation.

Adamas launches Xpert rangeIn 2012, Adamas launched a new range of core drilling machines named Xpert. Adamas’s German subsidiary GTW will market the new range, with sales being supported by a dedicated website/webshop www.xpert-diamantbohren.de. The product line that includes 12 drill rigs and seven motor specifications has been

designed with professional contractors in mind. It also includes a choice of drill bits

and every imaginable accessory from vacuum plates to dust

extraction units. The first off-line presenta-tion of the new machines will take place at

Bauma.

Among concrete cutting techniques, core drilling is the one with the biggest untapped potential as far as product development is concerned. PDi’s Andrei Bushmarin reports.

Profi-Line from DiacomAnother Dutch major, Diacom also targets professional contractors with its Profi-Line Extra series. The company’s commercial director Rob Conijn says that these rigs have been developed to match the increasingly powerful drill motors. The Profi-Line series, which cover a diameter range of 60 to 600mm come complete with a number of standard features, including easily replaceable legs, integral adjustable anchor plate, built-in reduction gearbox and dovetail attachment for rapid fitting and removal of the drill motor. Diacom has its own version of automatic feed, which is called Drill Robot.

It runs on either 220V or 380V without having to use

any conversion kits.

Pipe-drilling equipment from Dr. SchulzeThe German manufacturer Dr. Schulze has added a smart device to its range of drilling accessories. Called PipeDrill 500 it allows the operator to quickly fix the rig on a pipe to drill a hole in it at any required angle. According to the company, the PipeDrill 500 has an upper hand over other similar solutions, because it does not require any additional props for pipes with an external diameter under 630mm. If a pipe’s diameter exceeds 630mm, the PipeDrill 500 is installed on it with the aid of two tension belts.

Lissmac extends its Drill-Jet lineLissmac has further extended its proven Drill-Jet line of core

drilling machines. With five new systems covering drilling tasks of 20 to 500mm, Lissmac has moved a step closer

to becoming a full-range supplier of drilling solutions. The Drill-Jet rigs have been designed for professional users with a focus on user-friendliness. The new ma-chines are lightweight, ergonomic and sturdy. Thanks to the quick-clamping systems like

Quick-Loc or Universal Clamp-ing Neck Systems, the rigs are

easy to set up, operate and move around sites.

Baier Tools to present a new wet system at Bauma

Baier Tools will use Bauma to present its new drilling system BDB 837. The machine is designed for wet coring in heavily reinforced concrete with up to 550mm drill bits. Weighing in at only 11.5kg, the BDB 837 has a nominal power of 3kW. The motor’s speed is controlled by an in-house electronic controller ‘Power’ to ensure optimum drilling performance.


Keltbray uncovers history in London

Cleaning the sands… in time

In the UK contractor Keltbray is working with Museum of London Archaeology at Moorgate in the City of London, to help with their fieldwork, which has uncovered several buildings from the medieval and Roman periods.

A number of finds have been made where Keltbray has been working since 2010 sup-porting the development of a £47M (€54M) office scheme, due to be completed in 2014. Keltbray’s work includes demolition, groundwork and temporary works design totalling more than £6M (€7M).

“We have been working closely with Keltbray on site to ensure we could safely investigate

Qatar Primary Materials, located 50 km from Qatar’s capital Doha, operates one of the world’s largest sand cleaning plants producing 1,180t/h. Temperatures reach 40°C and 64,000t of ag-gregate are handled for every export shipment.

Volvo has suppled three wheeled loaders L150F, L180F and L180G working alongside Volvo trucks to assist in this vast operation.

the archaeological finds which are remarkably well preserved,” said MOLA contract manager David Divers. “We have found evidence for Ro-man industry and manufacturing, and buildings constructed from clay and timber, which appear to have been used as both workshops and houses; it was common for craftsmen and their families to work and live on the same premises.”

“Working with MOLA is especially rewarding when they make interesting finds, such as here, and I like to believe that Keltbray’s work on site has contributed in its own small way to help un-earth history that would otherwise not be known,” said Keltbray project manager Robert Ellis.

“We chose Volvo because the machines do not break down easily,” said QPM assistant manager Syed Waqar Ali. “They have lasted for years in tough working conditions for 22 to 24h/day. The machines have been outstanding and are still in good condition, considering we bought them back in 2009. They are unloading 64,000t of gravel in every export shipment.”


PA

TE

NT

ED

PDi_1_2013

Documents

Transcript of PDi_1_2013