Pipe Support Systems - Tiflex Limited support bro single pg.pdfPipe support range includes pipe...
8
Pipe Support Systems
Transcript of Pipe Support Systems - Tiflex Limited support bro single pg.pdfPipe support range includes pipe...
Pipe Support Systems
Pipe SupportPSB-170309
Many years of experience in manufacturing pipe support systems means the TICO range is all but limitless. Whatever the application, there will be a pipe system to solve your problem. From clamp blocks, to hangers, anti-vibration, high temperatures, isolation, varying metals, sizes etc. we can provide the solution.
Features & Benefits
Fire retardant rubber moulded components do not support the surface spread of flame
Can be manufactured to meet operational temperatures ranging from -50oC to +300oC
Pipe support range includes pipe hangers, pipe linings, sliding bearings, blocks and pads for all types of application.
Wide range of standard sizes
Various options to suit different pipe constructions from static to moving/expanding pipework.
Designed by working with offshore specialists
High quality products
World renowned for many years
Quality assurance to BS EN ISO 9001.
Come to us with your problem and we will provide a solution. Visit www.tiflex.co.uk or call our dedicated technical team on 01579 320808.
pipe support solutions
www.tiflex.co.uk
Clip Strips
S/CL Clip StripColour: RedHardness (IRHD): 69 ± 5ºDensity: 0.80 g/ccOperating Temp: -40ºC to +100ºC
HT/CL Clip StripColour: GreenHardness (IRHD): 69 ± 5ºDensity: 0.90 g/ccOperating Temp: -40ºC to +150ºC
VHT/CL Clip StripColour: YellowHardness (IRHD): 65 ± 5ºDensity: 1.20 g/ccOperating Temp: -60ºC to +300ºCFlexibility: Retained after 1 month at +300ºC
55-5055-75
55-10055-12555-17555-20055-25055-30055-40055-50055-600
JW Ref Number
Base (A) Thickness
3 mm3 mm5 mm5 mm6 mm6 mm6 mm
9.5 mm9.5 mm9.5 mm
12.5 mm
Clip Width (B)
12.5 mm19 mm25 mm32 mm40 mm50 mm64 mm75 mm
100 mm125 mm150 mm
Recess Depth (R)1.5 mm1.5 mm2.5 mm2.5 mm2.5 mm2.5 mm2.5 mm5 mm5 mm5 mm6 mm
55-5055-75
55-10055-12555-17555-20055-25055-30055-40055-50055-600
JW Ref Number
Base (A) Thickness
3 mm3 mm5 mm5 mm6 mm6 mm6 mm
9.5 mm9.5 mm9.5 mm
12.5 mm
Clip Width (B)
12.5 mm19 mm25 mm32 mm40 mm50 mm64 mm75 mm
100 mm125 mm150 mm
Recess Depth (R)1.5 mm1.5 mm2.5 mm2.5 mm2.5 mm2.5 mm2.5 mm5 mm5 mm5 mm6 mm
Base (A) Thickness
2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm
Clip Width (B)
35 mm45 mm55 mm65 mm75 mm85 mm95 mm
105 mm115 mm
Recess Depth (R)
2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm
Wall Width(W)
3 mm3 mm6 mm6 mm6 mm6 mm6 mm
12.5 mm12.5 mm12.5 mm19 mm
Wall Width(W)
3 mm3 mm6 mm6 mm6 mm6 mm6 mm
12.5 mm12.5 mm12.5 mm19 mm
Wall Width(W)
5 mm5 mm5 mm5 mm5 mm5 mm5 mm5 mm5 mm
Clip Strips have been designed to provide the highest level of shock and vibration isolation between pipe work and hanger.Avaialble in three grades for varying applications, Clip Strips fit most common strap widths, are easy to install and can be manufactured to suit temperatures up to 300°C.
BW
AR
BW
AR
BW
AR
TICO Pipe Grips have been designed specifically to isolate pipes, minimising vibration transmission between pipework and hanger and preventing corrosion between dissimilar metals.
There are two designs of pipe grip, a ‘Guide Type’ with a PTFE inside surface to allow movement of the pipework, and a ‘Grip Type’ which securely holds in the pipe in place to prevent movement.
Grip Type
Pipe Grips
mm12.7019.0025.4031.7538.1050.8076.20
101.60152.40203.20
Nominal Pipe Size
inch1/2”3/4”1”
1 1/4”1 1/2”
2”3”4”6”8”
Part Number
JW 152 - 21JW 152 - 27JW 152 - 34JW 152 - 43JW 152 - 49JW 152 - 61JW 152 - 89JW 152 - 115JW 152 - 168JW 152 - 219
Dimensions (mm)
A10101010101010101515
B18.521.525
34.537.543.557.570.5105131
C3034364549557083
123150
D25252525252525255050
F606565708090
100110180199
G666
10101012121616
K5760606070757575
120120
M293542566274
102128189240
X21273443496189115168219
mm12.7019.0025.4031.7538.1050.8063.5076.20
101.60152.40203.20
Nominal Pipe Size
inch1/2”3/4”1”
1 1/4”1 1/2”
2”2 1/2”
3”4”6”8”
Part Number
JW 153 - 16JW 153 - 25JW 153 - 30JW 153 - 38JW 153 - 45JW 153 - 57JW 153 - 76JW 153 - 89
JW 153 - 108JW 153 - 159JW 153 - 219
Dimensions (mm)
A1010101010101010101515
B16
20.5233235
41.551
57.567
100.5131
C303436454955677083119150
D2525252525252525255050
F606565708090
100100110180199
G666
1010101212121616
K545861627075757575
120120
M24333851577089
102121180240
X16253038
44.5577689
108159219
For stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10
For Cu/Ni pipes (based on seamless ‘Kunifer 10’ sizes) O/Ds of pipes conform to BS 2871 Part 2 Table 3. BS MA 18 Table 2 BS MS60. Also suitable for O/D stainless steel tubing.
Pipe SupportPSB-170309
www.tiflex.co.uk
F
K
X
C CB B
A
M
X/2
Y
YD
ØG
Section Y-Y
Key Features and Benefits of Pipe Grips:
Fire retardant rubber moulded components which do not support the surface spread of flame
Easy identification: Red = Cu/Ni Black = Stainless steel
Low evolution of toxic gases
Operational temperatures range from -50ºC to +120ºC continuous; 150ºC intermittant
High quality zinc plated metal parts as standard, other surface finishes available to customer specification
Manufactured in mild steel BS 4360, Grade 43A. Also available in stainless steel to BS 1449, 316S11
A wide range of standard sizes
Accurate threads mean easy fitting
Provides an unrivalled level of cushioning and support
Serrated inner face on ‘Grip Type’ provides positive pipe retention
Guide Type
mm*12.70*19.00*25.4031.7538.1050.8076.20
101.60152.40203.20
Nominal Pipe Size
inch1/2”3/4”1”
1 1/4”1 1/2”
2”3”4”6”8”
Part Number
JW 172 - 21JW 172 - 27JW 172 - 34JW 172 - 43JW 172 - 49JW 172 - 61JW 172 - 89JW 172 - 115JW 172 - 168JW 172 - 219
Dimensions (mm)
A10101010101010101515
B18.521.525
34.537.543.557.570.5105131
C3034364953597790
129156
D25252530303040405050
F606565708090
100110180199
G666
10101012121616
K5760606070757575
120120
M293542566274
102128189240
X21273443496189115168219
mm*12.70*19.00*25.4031.7538.1050.8063.5076.20
101.60152.40203.20
Nominal Pipe Size
inch1/2”3/4”1”
1 1/4”1 1/2”
2”2 1/2”
3”4”6”8”
Part Number
JW 173 - 16JW 173 - 25JW 173 - 30JW 173 - 38JW 173 - 45JW 173 - 57JW 173 - 76JW 173 - 89
JW 173 - 108JW 173 - 159JW 173 - 219
Dimensions (mm)
A1010101010101010101515
B16
20.5233235
41.551
57.567
100.5131
C303436495359747790
129156
D2525253030304040405050
F606565708090
100100110180199
G666
1010101212121616
K545861627075757575
120120
M24333851577089
102121180240
X16253038
44.5577689
108159219
For stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10
For Cu/Ni pipes (based on seamless ‘Kunifer 10’ sizes) O/Ds of pipes conform to BS 2871 Part 2 Table 3. BS MA 18 Table 2 BS MS60.
Dimensions in mm unless otherwise stated. Non-standard sizes are available upon request.
* See bolt detail Z. These items are without steel bushes and washers.
Y
M
A
DY
ØG
BBCC
KF
X
Section Y-Y
Spring Washer
Plain Washer
Steel Bush
PTFELining
Bolting Detail Z
www.tiflex.co.ukPipe SupportPSB-170309
Bondslips
Sliding BearingsTICO Bondslip units provide a simple, economical easy to install solution to the problem of accommodating movements in structures; for example due to expansion, contraction, settlement and variations in loading that might otherwise result in the development of high stresses and, potentially damage.
Typical applications of TICO Bondslip Units include:
• Low friction supports in mechanical and pipework installations• Low friction guide restraints• Temporary bearings employed during construction
TICO Bondslip Units have been developed over many years of involvement with petrochemical and industrial clients, and proven in thousands of applications worldwide.
Bondslip Units are custom designed and manufactured for specific applications, please contact us for more information.
Load Bearing Capacity MN/m2
Grade S/PT/PA Z/PT/PA RF/PT/PA PF/PT/PA
0.5 1.4 7 15.5
Typical values for the coefficient of friction between the PTFE faced lower members above and TICO S/NG/PA are given in the table below:
Coefficient of Friction
Stress MN/m2 0.7 1.4 3.5 7
0.09 0.07 0.05 0.04
Tiflex appreciate the wide variety of applications for TICO Bondslip Units and the differing requirements of each, and hence have made the design of these units as flexible as possible. Tiflex are able to offer custom units incorporating:
• Steel backing plates for easy installation, or units without backing plates for bonding directly to the structure on site. Steel thickness can be varied to suit the application.• Polished stainless steel plates in place of the standard TICO upper member. Such plates can also be supplied pre-welded to steel backing plates.• Backing plates to the customers specific requirements, e.g. carbon steel to BSEN 10025, stainless steel 316L or 304.• Steelwork coatings to customers specific requirements e.g. painted with red oxide primer or other paint systems, hot dip galvanized or plain unpainted.• Slots and holes within each member to provide positive location and restraint in one or more directions• One member only, for example for use as a guide stop restraint.• Hypalon edge proofing on the resilient TICO components for additional protection in aggressive environments• Wiper seals for areas heavily contaminated with abrasive dusts and powders to maintain the cleanliness of the sliding faces• Custom shapes and sizes which may not necessarily be square or rectangular• Thermal insulation layers• Different thickness components to suit rotational movements or space restrictions.• Specialist material grades to cope for exceptional loading conditions or elevated temperatures
Key advantages of Bond Slip units include:
• Simplicity & flexibility of design & installation• Maintenance free• Smooth movement without the occurrence of ‘stick slip’• Thermally stable & resistant to most environmental conditions likely to be encountered in service• Can be designed to accommodate rotational movement• Bondable substrate which accommodates surface irregularities in the structure• Materials can be supplied factory bonded to steel backing plates under controlled conditions
Tiflex Limited, Tiflex House, Liskeard, Cornwall, PL14 4NB, United KingdomTel: +44 (0) 1579 320808 Fax: +44 (0) 1579 320802Email: [email protected] Web: www.tiflex.co.uk
Clamp Blocks
S/CB Clamp Block
Clamp blocks provide protection and uniform spacing of pipe lines.They absorb shock, noise and vibration caused by fluid velocity and turbulence in pipes, high air velocity ducts, drumming of duct wall etc. which would otherwise be transmitted through the clamp to the surrounding structure or building.
TICO clamp blocks are manufactured singly or in multiple pipe carrying sections as shown.
S/NG/CB clamp blocks are identical to S/CB clamp blocks but with the added benefit of a molybdenum disulphide impregnated nylon bush to provide a low friction bore for the accommodation of additional longitudinal movement.
Please contact us if you require a size not specified in the standard range. We can manufacture bespoke clamps to suit specific applications.
S/NG/CB Clamp Block
M92-16M92-25M92-30M92-38M92-45M92-57M92-76M92-89
M92-108M92-159M92-219
JW PartNumber
G
1625303845577689
108159219
A
3338404461677683
104130160
B
213030383845577085110162
C
426060767690114140170220324
Depth
2525252550505050757575
E
33666
9.59.59.59.5
12.512.5
H
2525252538383838505050
Y
5270708686
102126152182236344
‘U’ Bolt ø F1010101010121212121620
C
ø GFø Bolt
H E
A
Y
B
