Cleanroom Lighting 14644-1 ISO-3 Fed Std. 209E Class 1 Read more about Cleanrooms here TL Seriese...
Transcript of Cleanroom Lighting 14644-1 ISO-3 Fed Std. 209E Class 1 Read more about Cleanrooms here TL Seriese...
TL SeriesIP-65, UL-1598 Wet 1700 PSI Washdown1000 hr Salt SprayISO-5 209E Class 100Inset 1-Piece DoorNSF Food Grade Gaskets
So, it is your job to choose a cleanroom fixture and you are wondering how to choose.
If you are looking for a fixture that is resistant to high pres-sure washdown, smooth clean-able surfaces, chemical resis-tant closed cell gaskets that are resilient and designed for a consistent seal.
Good.
You’re safe here.
EL SeriesIP-55 UL-1598 Wet 85 PSI Washdown1000 hr Salt SprayISO-5 209E Class 100Inset Channel DoorNeoprene Gaskets
100ISO-InseNeoNSF
Standard 2
Certified
ISO 14644-1
ISO-3
Fed Std. 209E
Class 1
Read more about
Cleanrooms here
eriesTL Se1598 WeIP-65, UL-
1700 PSI Washdow1000 hr Salt SprayISO-5 209E Class 1Inset 1-Piece DoorInset 1-Piece Doo
GNSF Food Grade
If you are looking for a that is resistant to highsure washdown, smootable surfaces, chemicatant closed cell gasketsare resilient and designconsistent seal.
Good.
You’re safe he
Certifiedfied
Fed Std. 209EF d Std 209E
Class 1
Read more ab
Cleanrooms h
CCEA
Certified
A
Certified
IEC 60529
Ingress Protection
Tested
CCEA
IEC 60529
Ingress Protection
Testeded
KL SeriesIP-66, UL-1598 Wet
1700 PSI Washdown
1000 hr Salt Spray
ISO-3, 209E Class 1
Overlapping 1-Piece Door
NSF Food Grade Gaskets
UL-844 Class I,II & III
NSF Std. 2 Food Zone
dd KL SeriesIP-66, UL-1598 Wet
1700 PSI Washdown
1000 hr Salt Spray
ISO-3, 209E Class 1
Overlapping 1-Piece Door
NSF Food Grade Gaskets
UL-844 Class I,II & III
NSF Std. 2 Food Zone
Choose any Kurtzon cleanroom fixture. Now that is simple.
KL Series- One Piece Overlap-ping Doorframe KL-F-2-2X4 Shown
TL Series- One Piece Inset Door-frame. TL-F-1-2X4 Shown
EL Series- Inset Welded Mitered Channel Doorframe EL-S-2-2x4 Shown
Cleanroom Rating
Fed Std 209E
ISO 14644 345678
1101001K10K100K
KL Series
TL Series
EL Series
Water Resistance
Pressure (psi) 1700100010050255
KL Series
TL Series
EL Series
HD1700
IP-66
HD1700
IP-65
HD85
IP-55
So you need: The Best A fully seam welded one piece housing.A doorframe that completely covers the flange or T-bar grid. A doorframe formed from a single piece of heavy gage metal that is corrosion resistant and without crevices. A lens that is first adhered to the frame and then mechanically secured along its full perimeter. NSF-2 Food Zone Hazardous locations Class I, II and III listed, Resistant to 1700 psi washdown. Certified IP-66, the highest of any cleanroom fixture.
So you need: Integrated Excellence A fully seam welded one piece housing. A doorframe that seals directly to the housing; a self-contained seal. A doorframe formed from a single piece of heavy gage metal that is corrosion resistant and without crevices. A lens that is first adhered to the frame and then mechani-cally secured along its full perimeter. NSF Non-Food Zone.Resistant to 1700 psi washdown Certified IP-65
So you need: Efficient Performance A fully seam welded one piece housing.A doorframe that seals directly to the housing; a self-contained seal. A doorframe with carefully mitered corners fully gasketed with resilient neoprene closed cell gasketing. A lens that is inverted and continuously sealed. NSF Non-Food Zone or Hazardous locations Class I listed, optionally resistant to 85 psi washdown and certified IP-55.
Then you only have one choice. That is the KL Series.
Your choice is clear. The TL Series.
Simply choose the EL Series.
WET LOCATION
209E100
FED STD 209E
CLASS 100
IP65
IEC 60529
ISO5
ISO 14644-1CLASS 5
NSF
NON-FOOD
Bio Safety Levels
BSL1 & 2
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
209E1
FED STD 209E
CLASS 1
Bio Safety Levels
BSL3 & 4
1700
PSI
hosedown
NSF
FOOD
ZONE
WET LOCATION
209E100
FED STD 209E
CLASS 100
NSF
NON-FOOD
Bio Safety Levels
BSL1 & 2
IP55
IEC 60529
ISO5
ISO 14644-1CLASS 5
1700
PSI
hosedown
Specifications:
Klean Lock Advanced Clean Space Series
1x4, 2x2 and 2x4 High Efficiency Luminaires
Certified for ISO-3, 209E Class 1 Cleanspaces
Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: One-piece overlapping style 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” and some 2.0” T-Bar Grid. Installation: Surface: Four .312” dia. mounting
holes and a removable gasketed wiring access plate. Gaskets: NSF Listed closed cell microcellular ex-truded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all recessed housings. Stainless steel doorframes and surface housings are satin polished unless option WHT is chosen. Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA in-spected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1. See “Options” for Class I, Div. 2 Groups A, B, C & D Listing (X12) & Class 1, 2 & 3 Div. 2 & 3 Groups A, B, C, D, F & G Listing (X22). Bio-Safety levels 3 & 4. Rated for 1700 PSI hosedown.
Surface Section View
4.8”
Grid Section View
4.5”
Flange Section View
4.5”
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
Standard
209E100
FED STD 209E
CLASS 100
BSL3 & 4
Bio Safety Levels
Optional
NSF
C-2 FOOD ZONE
Hazardous LocationClass 1 Division 2
Hazardous LocationClass II Division 2
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Hazardous LocationClass III
Options
FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass X12= Class I, Div. 2, groups A, B, C, D listing.*X22= Class 2, Div. 2 & 3, groups A, B, C, D, F & G list-ing.* (Not available in Surface Mounted)SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO
Series Installation Type Material Size Source Voltage
KL - - - - / - -
120V 277V 347V* UNV*
KL F = Flange G = Grid S = Surface
Qty/Type
Ordering Information: (Example: KL-F-1-1x4-2/T5-UNV-FF)
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*
* Note: Not all options are compatible with other
options. Consult factory for additional lamp
choices & options marked "*".
2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT
2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT
Fluorescent LED Arrays
25
YearWarranty
Specifications:
Tech-Lock Optimized Clean Space Series
1x4, 2x2 and 2x4 High Efficiency Luminaires
Certified for ISO-5, 209E Class 100 Cleanspaces
Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: One-piece inset style 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” T-Bar Grid. Installation: Surface: Four .312” dia. mounting
holes and a removable gasketed wiring access plate. Gaskets: NSF Listed closed cell microcellular ex-truded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings. Stainless steel doorframes are satin pol-ished unless option WHT is chosen. Consult factory for satin polished housings.Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-65. NSF -C2 listed for Non- food zone. Suitable for use in FDA & USDA in-spected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1. See “Options” for Class I, Div. 2 Groups A, B, C & D listing (X12). Bio-Safety levels 1 & 2. Rated for 1700 PSI Hosedown.
WET LOCATION
Standard
209E100
FED STD 209E
CLASS 100
Optional
NSF
C-2 FOOD ZONE
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Surface Section View
T-bar Grid Section View
Flange Section View
2x2 24x24.1 (609x612)
2x4 24x48.1 (609x1221)
4.5.”(113)
2x2 23.7x23.7 (602x602)
2x4 23.7x47.7 (602x1211)
4.5.”(113)
2x2 25x25.5 (635x648)
2x4 25x49.5 (635x1257)
TOGGLE RANGE 1.5-4.”(38-100)4.5.”(113)
IP65
IEC 60529
ISO5
ISO 14644-1CLASS 5
NSF
NON FOOD ZONE
Bio Safety Levels
BSL1 & 2
Options
FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO
Series Installation Type Material Size Source Voltage
TL - - - - / - -
120V 277V 347V* UNV*
TL F = Flange G = Grid S = Surface
Qty/Type
Ordering Information: (Example: TL-F-1-1x4-2/T5-UNV-FF)
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*
* Note: Not all options are compatible with other
options. Consult factory for additional lamp
choices & options marked "*".
2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT
2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT
Fluorescent LED Arrays
25
YearWarranty
Specifications:
Series Installation Type Material Size Source Voltage
EL - - - - / - -
120V 277V 347V* UNV*
EL F = Flange G = Grid S = Surface
Qty/Type
Ordering Information: (Example: EL-F-1-1x4-2/T5-UNV-FF)
Eco-Lock Basic Cleanspace Series
1x4, 2x2 and 2x4 High Efficiency Luminaires
Certified for ISO-5, 209E Class 100 Cleanspaces
Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: 20-gauge CRS, Aluminum or type 304 stainless steel channel door frame hinged to housing with two stainless steel cables. Secured by captive stainless steel screws. See Options for 85 PSI rating (HD85). Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to Door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” and some 2.0” T-Bar Grid. Installation: Surface: Four .312” dia. mounting
holes and a removable gasketed wiring access plate. Gaskets: Neoprene, 100% pure, closed cell located at interface of door to housing and door to lens. See Option “GG” for SealPro™ NSF Listed closed cell gasketing. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings and CRS or Aluminum doorframes. Stainless steel doorframes are satin polished un-less option WHT is chosen. Consult factory for satin polished housings.Listings: UL and CUL listed for wet Location. Dust and water resistance rated IP-55. Optional NSF -C2 listed for non-food zone. Certified ISO-14464-1 classes 5 to 9 Fed. Std. 209E Class 100. See “Options” for Class I, Div. 2 Groups A, B, C & D Listing (X12) . Bio Safety levels 3 & 4. Rated at 85 PSI Hosedown.
Surface Section View
T-bar Grid Section View
Flange Section View
WET LOCATION
Standard
209E100
FED STD 209E
CLASS 100
Optional
Hazardous LocationClass 1 Division 2
NSF
C-2 NON-FOOD
ZONE
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Bio Safety Levels
BSL1 & 2
IP55
IEC 60529
ISO5
ISO 14644-1CLASS 5
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*
* Note: Not all options are compatible with other
options. Consult factory for additional lamp
choices & options marked "*".
2x2 25x25.5 (635x648)
2x4 25x49.5 (635x1257)
TOGGLE RANGE 1.5-4.”(38-100)
4.5.”(113)
2x2 23.7x23.7 (602x602)
2x4 23.7x47.7 (602x1211)
4.5.”(113)
2x2 24x24.1 (609x612)
2x4 24x48.1 (609x1221)
4.5.”(113)
85 PSI
HOSE DOWN
RATED
Options
FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. GG= NSF Listed Seal-Pro Gaskets (Non-Food Zone)HD85= 85 PSI Hosedown ResistanceLEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass X12= Class I, Div. 2, groups A, B, C, D listing.*SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO
2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT
2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT
Fluorescent LED Arrays
25
YearWarranty
Keyhole slots allow captive hardware and easy release of access panel.
NSF listings for Food Zone standard.
Eliminates ceiling access panels. Allows access wherever a fixture is located.
Large 16 x 40 inch access allows full body entry to the plenum space.
NSF listings for Food Zone standard.
Optional stainless steel available for highly cor-rosive environments.
No tools needed for servicing.
Continuously maintains seal pressure.
Smooth washable surfaces.
Great for BSL-3 and 4 spaces.
KL-x/TR Series Top Relamp Luminaires for Clean Spaces
2x2 and 2x4 Luminaires for Flange/Drywall, Grid Installation
Certified for ISO-3, 209E Class 1 Clean Spaces
KL-x/PA Series Plenum Access Luminaires for Clean Spaces
2x4 Luminaires for Flange/Drywall or Grid Installation
Certified for ISO-3, 209E Class 1 Clean Spaces
Continuous piano hinged top cover easily released for servicing.
Fully NSF gasketed for a sure fixture seal. A handle and mechanical
stop built into top cover prevent fixture damage.
Fully seam welded housing provides rigidity even with large access window.
The same great door frame and listings as found on the regular Klean-Lock series.
Lamps and ballasts may be changed from above or below .
Fully NSF gasketed for a sure fixture seal.
The same great door frame and listings as found on the regular Klean-Lock series.
A handle and cable hinges allow simple access to plenum space.
KL-x/EZ Series Screwless Doorframe Luminaires for Clean Spaces
1x4, 2x2 and 2x4 Luminaires for Flange/Drywall, Grid or Surface Installation
Certified for ISO-3, 209E Class 1 Clean Spaces
Zone
No tools neservicing.
Continuously maintainseal pressure.
ooth washable faces.
Optional availablerosive en
Greaspac
No screws to loose or be left untightened.
Kurtzon Lighting1420 South Talman AvenueChicago, IL 60608(800) 837-8937 Phone(773) 277-9164 Faxwww.kurtzon.com
Hazardous Locations & Lighting
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Kurtzon LightingKurtzon Lighting 1 www.Kurtzon.com
Healthcare Facilities Brochure
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Vol. II
Daylight Series / Round Domes
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Food Processing Lighting
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Kurtzon Lighting / Innovators In Lighting Since 1898
Kurtzon LightingKurtzon Lighting1 www.Kurtzon.com
Wet Location Lighting Brochure
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Indoor Sports Lighting
www.Kurtzon.comKurtzon LightingKurtzon LightingInnovators in
Lighting Since 1898
Me
dic
al
Do
wn
lig
hts
Cle
an
roo
m L
igh
tin
g
Receive a copy of these brochures from your local sales representative
or download them from www.kurtzon.com/Technical_bulletins.
Chicago, IL 60608 (800) 837-8937www.kurtzon.com