CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil...

41
CE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and USCS) (Das, Ch. 4)

Transcript of CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil...

Page 1: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

CE 240Soil Mechanics & Foundations

Lecture 3.2

Engineering Classification of Soil(AASHTO and USCS)

(Das, Ch. 4)

Page 2: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Outline of this Lecture

1.Particle distribution and Atterberg Limits2.Soil classification systems based on

particle distribution and Atterberg Limits3.American Association of State Highway and

Transportation Officials System (AASHTO)4.The Unified Soil Classification System

(USCS)

Page 3: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

ObjectiveClassifying soils into groups with similar behavior, in terms of simple indices, can provide geotechnical engineers a general guidance about engineering properties of the soils through the accumulated experience.

Simple indices

GSD, LL, PI

Classification system

(Language)

Estimate engineering properties

Achieve engineering

purposesUse the

accumulated experience

Communicate between

engineers

Page 4: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Classification Systems

• Two commonly used systems for soil engineers based on particle distribution and Atterberg limits:

• American Association of State Highway and Transportation Officials (AASHTO) System (for state/county highway dept.)

• Unified Soil Classification System (USCS) (preferred by geotechnical engineers).

Page 5: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Soil particles

The description of the grain size distribution of soil particles according to their texture (particle size, shape, and gradation).

Major textural classes include, very roughly:gravel (>2 mm);sand (0.1 – 2 mm);silt (0.01 – 0.1 mm);clay (< 0.01 mm).

Furthermore, gravel and sand can be roughly classified as coarse textured soils, wile silt and clay can be classified as fine textures soils.

Page 6: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Grain Size Distribution Curves

GRAVEL SAND FINES

Cob

bles

or B

ould

ers

Page 7: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Atterberg limits Atterberg limits are the limits of water content used to define soil behavior. The consistency of soils according to Atterberg limits gives the following diagram.

Page 8: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

American Association of State Highway and Transportation Officials system (AASHTO)

Origin of AASHTO: (For road construction)

This system was originally developed by Hogentogler and Terzaghi in 1929 as the Public Roads Classification System. Afterwards, there are several revisions. The present AASHTO (1978) system is primarily based on the version in 1945. (Holtz and Kovacs, 1981)

Page 9: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Definition of Grain Size

No specific grain size-use Atterberg limits

Boulders Silt-ClayGravel Sand

Coarse Fine

No.4

4.75 mm

No.200

0.075 mm

75 mm

No.40

0.425 mm

Page 10: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Classification

Das, Table 4.1, 2006(Proceeding from left to right against the columns)

Page 11: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Classification (Cont.)

Note: The first group from the left to fit the test data is the correct AASHTO classification. Das, Table 4.1, 2006

Page 12: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Group Index GI

[ ]200

200

( 35) 0.2 0.005( 40)0.01( 15)( 10) (4.1)

GI F LLF PI

= − + −

+ − −

The first term is determined by the LL

The second term is determined by the PI

For Group A-2-6 and A-2-7

2000.01( 15)( 10) (4.2)GI F PI= − − use the second term only

F200: percentage passing through the No.200 sieve

In general, the rating for a pavement subgrade is inversely proportional to the group index, GI.

Page 13: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Some Explanations of Group Index GI

1, if Eq. 4.1 gives a negative value then GI=0;

2, round up the value calculated by Eq. 4.1 to an integer;

3, there is no upper limit for GI;

4, the GIs for soil groups A-1-a, A-1-b, A-2-4, A-2-5, and A-3 are always zero (0).

Page 14: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

(LL)

(PI)

Das, Figure 4.1

Page 15: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

General Guidance– 8 major groups: A1~ A7 (with several subgroups) and

organic soils A8– The required tests are sieve analysis and Atterberg

limits.– The group index, an empirical formula, is used to

further evaluate soils within a group (subgroups).

– The original purpose of this classification system is used for road construction (subgrade rating).

A4 ~ A7A1 ~ A3

Granular Materials

≤ 35% pass No. 200 sieveSilt-clay Materials

≥ 36% pass No. 200 sieve

Using LL and PI separates siltymaterials from clayey materials

Using LL and PI separates siltymaterials from clayey materials (only for A2 group)

Page 16: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example 4.1, Soil B[ ]

3347.33)10PI)(15F(01.0

)40LL(005.02.0)35F(GI

200

200

≅=−−+

−+−=

Round off A-7-5(33)

Passing No.200 86%LL=70, PI=32LL-30=40 > PI=32

Page 17: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

This is the example of Das, Example 4.1 for the AASHTO system classification

Page 18: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

USCS Classification System

• Originally developed for the United States Army Corps of Engineers (USACE)

• The method is standardized in ASTM D 2487 as “Unified Soil Classification System (USCS)”

• USCS is the most common soil classification system among geotechnical engineers

Page 19: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Unified Soil Classification System (USCS)

Origin of USCS:

This system was first developed by Professor A. Casagrande (1948) for the purpose of airfield construction during World War II. Afterwards, it was modified by Professor Casagrande, the U.S. Bureau of Reclamation, and the U.S. Army Corps of Engineers to enable the system to be applicable to dams, foundations, and other construction.Four major divisions:(1) Coarse-grained(2) Fine-grained(3) Organic soils(4) Peat

Page 20: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Definition of Grain Size

No specific grain size-use Atterberg limits

Silt and

Clay

Gravel SandCobblesBoulders

Coarse Fine Coarse Medium Fine

75 mm No.4

4.75 mm

No.200

0.075 mm

300 mm

No.10

2.0 mm

19 mm No.40

0.425 mm

Page 21: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

(Das, Table 4.2)

Page 22: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

The Symbols• Soil symbols:• G: Gravel• S: Sand• M: Silt• C: Clay• O: Organic• Pt: Peat

• Liquid limit symbols:

• H: High LL (LL>50)• L: Low LL (LL<50)• Gradation symbols:• W: Well-graded• P: Poorly-graded

)sandsfor(6Cand3C1

)gravelsfor(4Cand3C1

soilgradedWell

uc

uc

≥<<

≥<<−Example: SW, Well-graded sand

SC, Clayey sand

SM, Silty sand,

MH, Elastic silt

Page 23: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

USCS System (cont.)

• A typical USCS classification would be:

SM Silty sand with gravel

Group Symbol

Group Name

-

Page 24: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Classification of Soils• From sieve analysis and the grain-size

distribution curve determine the percent passing as the following:– > 3 inch – Cobble or Boulders– 3 inch - # 4 (76.2 – 4.75 mm) : Gravel– # 4 - # 200 (4.75 - 0.075 mm) : Sand– < # 200: Fines

• First, Find % passing # 200• If 5% or more of the soil passes the # 200

sieve, then conduct Atterberg Limits (LL & PL)

Page 25: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Classification of Soils• If the soil is fine-grained (≥ 50% passes

#200) follow the guidelines for fine-grained soils

• If the soil is coarse-grained (<50% passes #200) follow the guidelines for coarse-grained soils– Find % Gravel & Sand– Calculate Cu & Cc– Calculate LL, PL and PI

Page 26: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

General Guidance

Coarse-grained soils:

Gravel Sand

Fine-grained soils:

Silt ClayNO.200

0.075 mm

•Grain size distribution

•Cu

•Cc

•PL, LL

•Plasticity chart

50 %

NO. 44.75 mm

Required tests: Sieve analysis

Atterberg limit

LL>50 LL <50

50%

Page 27: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Coarse-grained Soils

Page 28: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Fine-grained Soils

Page 29: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example – Soil A

Soil A: D60 = 4.2 mm , D30 = 0.6 mm, D10 = 0.09 mmCu = 46.67Cc = 0.95

Gravel98-62 = 36%

Sand62-8 = 54%

Fines = 8%

gravel sand fines

Page 30: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example – Soil A (Cont.)Grave = 36%Sand = 54%Fines = 8%Cu = 46.7Cc = 0.95

LL = 42PL = 31PI = 42-31 = 11

GO TO Plasticity Chart

Page 31: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example – Soil A (Cont.)

• Soil A is then classified as SP-SM – Poorly-grades sand with silt and gravel

Page 32: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example – Soil A (Cont.)

LL = 42PL = 31PI = 42-31 = 11

ML

Page 33: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

The Plasticity Chart

(Holtz and Kovacs, 1981)

LL

PI

HL• The A-line generally separates the more claylike materials from silty materials, and the organics from the inorganics.

• The U-line indicates the upper bound for general soils.

Note: If the measured limits of soils are on the left of U-line, they should be rechecked.

Page 34: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Procedures for Classification

(Santamarina et al., 2001)

Coarse-grained material

Grain size distribution

Fine-grained material

LL, PI

Highly

Page 35: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Example

Passing No.200 sieve 30 %

Passing No.4 sieve 70 %

LL= 33

PI= 12PI= 0.73(LL-20), A-line

PI=0.73(33-20)=9.49

SC (≥15% gravel)

Clayey sand with gravel

(Santamarina et al., 2001)

Passing No.200 sieve 30 %Passing No.4 sieve 70 %

LL= 33

PI= 12

Highly

Page 36: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Organic SoilsHighly organic soils- Peat (Group symbol PT)

− A sample composed primarily of vegetable tissue in various stages of decomposition and has a fibrous to amorphous texture, a dark-brown to black color, and an organic odor should be designated as a highly organic soil and shall be classified as peat, PT.

Organic clay or silt( group symbol OL or OH):− “The soil’s liquid limit (LL) after oven drying is less than

75 % of its liquid limit before oven drying.” If the above statement is true, then the first symbol is O.

− The second symbol is obtained by locating the values of PI and LL (not oven dried) in the plasticity chart.

Page 37: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

This is the Figure 4.7 of Das’ textbook, the scanning electron micrographs (SEM) for 4 peat samples.

Page 38: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Borderline Cases (Dual Symbols)For the following three conditions, a dual symbol should be used.–Coarse-grained soils with 5% - 12% fines.−About 7 % fines can change the hydraulic

conductivity of the coarse-grained media by orders of magnitude.

−The first symbol indicates whether the coarse fraction is well or poorly graded. The second symbol describe the contained fines. For example: SP-SM, poorly graded sand with silt.

Page 39: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Borderline Cases (Dual Symbols, cont.)

–Fine-grained soils with limits within the shaded zone. (PI between 4 and 7 and LL between about 12 and 25).−It is hard to distinguish between the silty and more

claylike materials.−CL-ML: Silty clay, SC-SM: Silty, clayed sand.

–Soil contain similar fines and coarse-grained fractions.− possible dual symbols GM-ML

Page 40: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Borderline Cases (Summary)

(Holtz and Kovacs, 1981)

Page 41: CE 240 Soil Mechanics & Foundations Lecture 3lanbo/CE240LectW032Soilclassification.pdfCE 240 Soil Mechanics & Foundations Lecture 3.2 Engineering Classification of Soil (AASHTO and

Reading Assignment:

Das, Ch. 4

Homework:

Problem 4.3