1/4 DIN Accessories 1/4 DIN Mounting Brackets H-68 Description The 1/8 and 1/16 DIN Mounting Adaptor...
Transcript of 1/4 DIN Accessories 1/4 DIN Mounting Brackets H-68 Description The 1/8 and 1/16 DIN Mounting Adaptor...
Controls
H-67
CONT
ROLL
ERAC
CESS
ORIE
S
1/4 DINAccessories1/4 DIN MountingBrackets
3.5” C/C0.266” Dia. Mtg. Holes
Surface Mounting2040, 2104, and 3101 Series
Part No. 0006-12072 PCN 309315
3.5” C/C0.266” Dia. Mtg. Holes
Surface Mounting3901 Series
Part No. 0006-12081 PCN 309307
4.5(114)
3.5(89)
6(152)
4.5(114)
3.25(83)
Surface Mounting2040, 2104, 2110, 3340, 3380
Part No. 0006-12151 PCN 317980
3.5” C/C0.266” Dia. Mtg. Holes
4.5(114)
3.5(89)
4.5(114)
6(152)
5(127)
3.5(89)
6(152)
6(152)
4.5(114)
Surface Mounting for 2 Controllers2040, 2104, 3101, 2110, 3340, 3380
Part No. 0006-12157 PCN 339098
4.5(114)
3.5(89)
9.5(241)
4.5(114)
10.5(260)
4.5(114)
Side Mounting1/4 DIN Instruments
Part No. 0006-12034 PCN 313904
7/32”
2(51)
5.2(132)
4.2(107)
Controls
H-68
Description
The 1/8 and 1/16 DIN Mounting Adaptor Kitsallow you to easily convert an existing 1/4 DINpanel cutout for mounting an 1/8 or 1/16 DINinstrument.
1/8 & 1/16 DINMounting Adapter Kits
• Convert 1/4 DIN Mounting HoleCutouts
• Pre-drilled, Easy to Install
• 4 Screws and Nuts Included
Ordering Information
Description Part Number PCN1/4 to 1/8 DIN Mounting Adapter Kit 0006-12136 3069311/4 to 1/16 DIN Mounting Adapter Kit 0006-12137 306923
Dimensions
All Dimensions in Inches (mm)
1/8 DIN 1/16 DIN
3.9(99)
1.7(43)
3.6(91)
3.9(99)
1/8 DINCutout
1/16 DINCutout
3.9(99)
1.7(43)
1.7(43)
3.9(99)
1/16 DINSurface MountingBrackets
2.5(64)
Dimensions
0.375(10)
Cutout1.77 x 1.77
(43 x 43)
Depth2.12(54)
Description Depth (In, mm) Part Number PCN
Models 1600, 1601 and 1603 4.38 (111) 0006-12155 305200Surface Mounting BracketModels 1604 and 1605 Surface 5.13 (130) 0006-12154 305218Mounting Bracket
Ordering Information
Front View Front View
Front View Side View
All Dimensions in Inches (mm)
Controls
H-69
CONT
ROLL
ERAC
CESS
ORIE
S
Enclosures with Cutouts
ENC SeriesENC 4Instrument Enclosures
• NEMA 4X, Fiberglass Enclosureswith DIN cutouts or DoorWindow
• Prepunched Sub-Panel forWindow Design Enclosures
NEMA 4X fiberglass enclosure with hinged door window and pre-drilled sub-panel for eithersingle or double 1/4 DIN Mounting Brackets. Brackets are ordered separately (see accessorytable below.)
Description
The ENC series of enclosures are simpleboxes with either cutouts or with windowcovers for mounting 1/16 DIN (All 1600series) or 1/4 DIN (2104, 2110, 3101, 3340,3380) Controllers. (Controllers not included.)
The ENCs with cutouts allow the operator toeasily access the controller pushbuttons. TheENC enclosure with window covers ensureprotection for the controllers.
StockModel Description Status PCN
ENC4-QTR01 One 1/4 DIN Cutout, 8”H x 6.5”W x 6”D S 317913ENC4-SIX01 One 1/16 DIN Cutout 8”H x 6.5”W x 6”D NS 317921ENC4-SIX02 Two 1/16 DIN Cutouts, 8”H x 6.5”W x 6”D NS 317930ENC4-QTR02 Two 1/4 DIN Cutouts, 12”H x 10”W x 6”D S 317948
StockModel Description Status PCN
ENC4-QTRW0 NEMA 4X 12”H x 10”W x 6”D Subpanel predrilled S 317956for single or dual 1/4 DIN mounting brackets
Mounting Brackets for ENC 4 Enclosures with Windows
The NEMA 4X fiberglass enclosures have hinged front covers to allow for easy mounting andwiring. When the controller is installed according to factory recommendations the NEMA ratingof the controller is maintained.
StockModel Description Status PCN
0006-12151 Single 1/4 DIN Mounting Bracket S 3179800006-12157 Double 1/4 DIN Mounting Bracket S 339098
Controls
H-70
ENC SeriesENC 7Instrument Enclosures(cont’d.)
Mounting Plates for ENC 7 Enclosures
StockModel Description Status PCN
0006-12179 1/4 DIN Mounting Plate NS 3391000006-12177 1/16 DIN Mounting Plate NS 3391190006-12178 Dual 1/16 DIN Mounting Plate NS 339127
• NEMA 7/4, Explosion ProofEnclosure
• Suitable for 1/4 (2110, 2104,3101, 3340, 3380) & 1/16 DIN (all1600 series) Controllers under5.5” in Length
Description
The ENC series of enclosures are simpleboxes with window covers for mounting 1/16DIN (All 1600 series) or 1/4 DIN (2104, 2110,3101, 3340, 3380) Controllers. (Controllersnot included.) The NEMA 7/4 enclosures arerugged sand-cast aluminum designed for NECClass I, Division I & Division II, Groups B, C, &
StockModel Description Status PCN
ENC7-QTRW0 NEMA 7/4 8”H x 8”W x 8”D* NS 317964
D and Class II, Division I & Division II, GroupsE, F, & G. Includes a 5” Window, breather/drainvalve, and (3) each 1/2”NPT conduit openings.ENC7s are suitable for one 1/4 DIN controller orup to (2) 1/16 DIN controllers. Mounting Platesare ordered separately (see accessory tablebelow).
* 1/4 and 1/16 DIN Mounting Plates Sold Separately
Controls
H-71
CONT
ROLL
ERAC
CESS
ORIE
S
Chromalox
Chromalox
TEMP CONTROL
OVERTEMP
Features
• High impact strength, high temperatureplastic
• Heat Resistant up to 266°F (130°C)
• NEMA 4 Protection
• Supplied with 2 keys
NEMA 4 Protection
Protects Two 1/4 DIN PanelMounted Instruments Against:
• Mechanical Damage
• Unauthorized Operation
• Dust and Splashwater
Dimensions7.3
(184)
1.8(45)
11.9(301)
Front View SideView
Super Splash GuardInstrument CoverModel 0076-12034
Description Part Number PCN
Splash-Guard 0076-12034 321939
Ordering InformationAll Dimensions in Inches (mm)
Note: Controllers not included.
Splash GuardInstrument Cover
Protects 1/4 DIN Panel MountedInstruments Against:
• Mechanical Damage
• Unauthorized Operation
• Dust and Splashwater
Dimensions
All Dimensions in Inches (mm)
1.3(34)
1.5(39)
Front View Side View
Note: Controllers not included.
Features
• High impact strength, high temperatureplastic
• Heat Resistant up to 266°F (130°C)
• Protection to DIN 40050, dust-tight andsplashproof IP54
• Supplied with 2 keys
• Use with models 3901, 3340, 3380, 2030and 2040
Description Part Number PCN
Splash-Guard 0148-00012 314421
Ordering Information
4.8(122)
4.6(116)
2.6(66)
4.3(110)