CONCRETE ACCESSORIES Sika® Greenstreak WATERSTOPS
Transcript of CONCRETE ACCESSORIES Sika® Greenstreak WATERSTOPS
CONCRETE ACCESSORIESSika® Greenstreak WATERSTOPS
2Sika® Greenstreak WATERSTOPS Concrete Accessories
Sika® Greenstreak WATERSTOPS
Offering a variety of solutions across all categories of waterstops, Sika has the knowledge and time tested products to meet the most demanding applications.
Water/Waste Water Treatment Plants Lock and Dam Systems Reservoirs and Aqueducts Flood Walls Retaining Walls Foundations Tunnels and Culverts Bridge Abutments Containment Structures and Tanks Slabs-on-Ground
When you specify Sika, you are specifying THE first name in waterstops and the trusted source for superior technical and customer service.
3Sika® Greenstreak WATERSTOPS
Concrete Accessories
CHOOSING THE RIGHT WATERSTOP
WATERSTOP BASIC USE
Embedded in concrete, across and/or along the joint, waterstops form a watertight diaphragm that prevents the passage of liquid through the joint. Sika® Greenstreak Waterstops are precision engineered for vertical and horizontal expansion joints between cast-in-place concrete units where conditions may subject the concrete to hydro-static pressure or moisture seepage. They are manufactured with the highest quality PVC to provide the strongest tensile strength and elongation capabilities possible with a superior resistance to alkalis, acids, ozone and waterborne chemicals.
Sika®’s complete line of shapes and sizes assures a long, lasting, watertight seal for every above or below grade concrete structure.They do not discolour concrete, nor do they produce or support electrolytic action with metal structures nearby or with embedded rebar steel.
Sika® Greenstreak Waterstops maintain their integrity indefinitely. They are the premium choice for strength, impermeability and elongation.
SUGGESTED WATERSTOP DESIGN CHECKLIST
Verify chemical containment requirements, if any Verify hydrostatic head pressure requirements Determine joint type and joint movement requirements Specify material type for best water sealing performance Specify profile and size (by product number, if possible) Verify joinery details of dissimilar or asymmetric waterstop
profiles, if any (consider using one profile throughout to simplify intersections)
Specify factory fabrications and fittings for transitions and intersections
Specify appropriate method for securing waterstop in position (see Sika® Greenstreak CSI-formatted product specifications for additional guidance)
Photo courtesy of Paul C. Rizzo Associates, Inc.
4Sika® Greenstreak WATERSTOPSConcrete Accessories
MOVEMENT JOINTS SELECTING A WATERSTOP SHAPE
MOVEMENT JOINTS are typically designed to accommodate significant movement due to drying shrinkage, temperature changes, settlement, creep, or live load deflections. The waterstop profile selected must have the ability to accommodate expected joint movement, typically achieved through the use of a centerbulb, tear web, or other suitable waterstop geometry designed to accommodate joint movement. Movement joints typically include contraction joints, expansion joints, and isolation joints. The following profiles are suitable for movement joints:
Ribbed with Centerbulb shapes are the most versatile type of waterstops available. The centerbulb accommodates lateral, transverse, and shear movement. Larger centerbulbs will accommodate greater movement.
Tear Web shapes accommodate large movements. When joint movement occurs, the tear web ruptures and allows the U-bulb to deform without placing the material in tension.
PRODUCT AND MATERIAL OPTIONS
Sika has the industry's most comprehensive collection of waterstop products and solutions to meet the most demanding applications. This catalogue is primarily dedicated to PVC (polyvinyl chloride) waterstops, but general information is included for chemical resistant waterstops (TPE-R, PE, Stainless Steel), strip-applied waterstops (Hydrotite, SikaSwell®-A, Sika® Swellstop®, Lockstop) and for SikaFuko® Injection Hose Systems. Complete catalogues and technical data for each of these products are available in print or online.
Dumbbell with Centerbulb shapes accommodate lateral, transverse, and shear movement. Larger centerbulbs will accommodate greater movement. Consider using Ribbed with Centerbulb for better sealing characteristics.
Base Seal with Tear Web shapes accommodate lateral, transverse, and shear movement. Larger tear web bulbs will accommodate greater movement. Base Seal waterstops have some limitations with transitions and intersections.
5Sika® Greenstreak WATERSTOPS
Concrete Accessories
NONMOVING JOINTS typically have 100% of the bonded steel reinforcement continuous through the joint, and expose the waterstop to negligible or no movement. Flat waterstop profiles without a centerbulb or tear web are suitable for nonmoving joints. Other waterstop materials may be considered for nonmoving joints as well, such as strip-applied or injectable hose waterstops. Examples of waterstop profiles suitable for nonmoving joints are as follows:
Split Flange shapes can simplify forming. The split flange is opened and attached to the bulkhead for placement of the first concrete element. After stripping the bulkhead, the flange is closed and anchored for placement of the adjoining element. Split waterstops are suitable for straight runs only. Transitions and intersections are not practical with these profiles.
Waterstops for Retrofit Applications seal joints where new construction meets an existing structure and can be suitable for moving joints. Systems include stainless steel batten bars and fasteners for anchoring to the existing structure with the aid of an epoxy gel.
Strip-applied Waterstops are adhered along concrete joints or penetrations and encapsulated by a subsequent concrete placement. Hydrotite is the state of the art for hydrophilic waterstop and is a high-performance, chloroprene rubber material that expands when exposed to moisture to create a compression seal within and along the joint. For less critical applications, Sika also offers SikaSwell®-A and Sika® Swellstop® expanding waterstops.
Flat Ribbed shapes are preferred for nonmoving joints and provide the best sealing characteristics.
Dumbbell shapes are an alternate profile for nonmoving joints. Consider ribbed shapes for better sealing characteristics.
Base Seal is ideal for slab-on-grade joints or backfilled walls and are easy to form. Base Seal waterstops have some limitations with transitions and intersections.
Labyrinth is primarily used in vertical joints. Labyrinth shapes create a keyed joint and do not require split bulkheads. Labyrinth can be difficult to use in horizontal joints and there are some limitations with transitions and intersections.
NONMOVING JOINTSSELECTING A WATERSTOP SHAPE
New Concrete
Existing Concrete
6Sika® Greenstreak WATERSTOPSConcrete Accessories
Sika® Greenstreak PVC WATERSTOPS
Sika® Greenstreak, one of the first manufacturers of polyvinyl chloride (PVC) waterstop, has formulated, compounded and manufactured PVC waterstop for years. Sika® has the knowledge, experience and desire to provide the highest quality joint sealing solutions and services available.
PVC is the industry standard for flexible waterstops, which are typically embedded across and along the joint. PVC is the most versatile waterstop material, offering the broadest design selection and is accepted under the ACI 350 "Code Requirements for Environmental Engineering Concrete Structures". It has great inherent elasticity and is resistant to many waterborne chemicals. It will not discolour concrete or produce electrolytic action.
Sika® offers the industry's widest array of PVC waterstop designs, typically ranging in widths from 100 to 300 mm (4 to 12 in) and thicknesses from 3 to 12 mm (1/8 to 1/2 in). Depending on size, most waterstop shapes are provided in 15 or 30 m (50 or 100 ft) coils. Please contact Sika Canada Inc. for further information or if you need assistance in selecting a waterstop.
All Sika® Greenstreak PVC waterstops are specially formulated and manufactured to meet or exceed industry standard product specifications.
Sika® Greenstreak PVC Waterstops
Property Test Value
Water absorption ASTM D570 0.15% max.
Tear resistance ASTM D624 300 lb/in min.
Ultimate elongation ASTM D638 350% min.
Tensile strength ASTM D638 2000 psi min.
Low temperature brittleness
ASTM D746Passes @ -35°F / -37°C
Stiffness in flexure ASTM D747 700 psi min.
Specific gravity ASTM D792 1.38 max.
Hardness Shore A15 ASTM D2240 79±3
Accelerated extraction-Tensile strength
Corps of Engineers
CRD-C 572
1600 psi min.-Elongation 300% min.Effect of Alkali-Weight change +0.25% -0.10%-Hardness change +/-5 points
PHYSICAL PROPERTIES SIKA CONDUCTS REGULAR TESTING OF MATERIALS.
Independent laboratory tests are available for the following applicable standards:
Corps of Engineers CRD-C 572-74
Bureau of Reclamation
CH2M HILL
MWH
Various State Highway and/or Public Works Department Standards
Test results conducted using British Standards are also available. Consult a Sika Canada representative for more information.
7Sika® Greenstreak WATERSTOPS
Concrete Accessories
PVC waterstops must be securely positioned in the forms to prevent deflection or misalignment during concrete placement. This is achieved by tying off the outer edge of the waterstop to adjacent reinforcing steel. Sika offers options to properly anchor PVC waterstop, including:
PUNCHED FLANGES - most ribbed shapes can be provided with punched flanges
GROMMETS - select shapes can be provided with brass grommets
HOG RINGS AND PLIERS - available for field application and suitable for most shapes
Virtually every concrete structure requiring a PVC waterstop is going to encounter a joint that will change direction or intersect with another joint. One of the benefits PVC offers is the ability to heat weld the material to create a continuous sealing diaphragm within the joints of a concrete structure.
Waterstop failures are often the result of improper field fabricated transitions and intersections. To avoid potential problems, Sika strongly recommends FACTORY FABRICATIONS and maintains an inventory of the most common fabrications to meet the demands of a construction schedule.
SPLICING IRONS are available in various sizes for field welding lengths of PVC waterstop. More information can be found on page 18.
INSTALLATION AIDS AND FABRICATIONS
Hog Rings and Pliers
Splicing Irons
Factory Fabrications
8Sika® Greenstreak WATERSTOPSConcrete Accessories
DESIGN AND SIZES
SHAPES ARE DRAWN TO VARYING SCALES
RIBBED CENTER BULB
NO. STD. WT. HEAD PRESS.
643 0.58 lb/ft (0.86 kg/m) 50' (149 KPa)
100.0mm
5.0mm 10.0mm
4.0mm ID & 10.0mm OD Ontario Hydro
644 1.37 lb/ft (2.04 kg/m) 100' (299 KPa)
150.0mm
16.0mm
8.0mm 5.0mm ID & 16.0mm OD Ontario Hydro
645 2.13 lb/ft (3.17 kg/m) 150' (448 KPa)
10.0mm18.0mm 6.5mm ID & 18.0mm ODOntario
Hydro
200.0mm
647 0.92 lb/ft (1.37 kg/m) 100' (299 KPa)
3/16" 4.8mm
1/8" 3.2mm
6"152.4mm
5/16” ID & 9/16" OD 7.9mm ID & 14.3mm OD
New York A
649 1.28 lb/ft (1.90 kg/m) 100' (299 KPa)
7"177.8mm
1/4" 6.4mm
1/8" 3.2mm
5/8” ID & 1" OD 15.9mm ID & 25.4mm OD
New York B
696 2.65 lb/ft (3.94 kg/m) 175' (523 KPa)
9"228.8mm
3/16" 4.8mm
3/8" 9.5mm
7/8” ID & 1 1/2" OD 22.2mm ID & 38.1mm OD 1/4"
6.4mm
USBRC.O.E.
701 0.42 lb/ft (0.63 kg/m) 65' (194 KPa)
4"101.6mm
3/16" 4.8mm
3/16” ID & 3/8" OD 4.8mm ID & 9.5mm OD
NO. STD. WT. HEAD PRESS.
702 0.74 lb/ft (1.10 kg/m) 65' (194 KPa)
1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD
CH2M HILL
4"101.6mm
1/8"3.2mm
3/16" 4.8mm
703 0.73 lb/ft (1.09 kg/m) 100' (299 KPa)
6"152.4mm
3/16" 4.8mm
1/8" 3.2mm
1/8" 3.2mm
1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD
704 .98 lb/ft (1.46 kg/m) 100' (299 KPa)
6"152.4mm
3/16"4.8mm
1/4" 6.4mm
1/4” ID & 11/16" OD 6.4mm ID & 17.5mm OD
705 1.19 lb/ft (1.77 kg/m) 125' (373 KPa)
3/8" 9.5mm
6"152.4mm
3/16" 4.8mm
1/8" 3.2mm
1/4” ID & 11/16" OD 6.4mm ID & 17.5mm OD
USBR
706 1.90 lb/ft (2.83 kg/m) 150' (448 KPa)
6"152.4mm
3/8" 9.5mm
1/2" 12.7mm
3/4" 19.1mm
5/16” ID & 15/16" OD 7.9mm ID & 23.8mm OD
707 1.19 lb/ft (1.77 kg/m) 100' (299 KPa)
9"228.6mm
3/16" 4.8mm
1/4” ID & 1/2" OD 6.4mm ID & 12.7mm OD
708 1.45 lb/ft (2.15 kg/m) 125' (373 KPa)
9"228.6mm
1/4" 6.4mm
1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD
9” Mass.3/16" 4.8mm
NO. STD. WT. HEAD PRESS.
709 1.63 lb/ft (2.43 kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm
3/16" 4.8mm 1/8"
3.2mm
1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD
710 2.72 lb/ft (4.05 kg/m) 200' (598 KPa)
9"228.6mm
1/2" 12.7mm
3/8" 9.5mm
1" 25.4mm
1/2” ID & 1" OD 12.7mm ID & 25.4mm OD
711 1.56 lb/ft (2.32 kg/m) 150' (448 KPa)
12”304.8mm
3/16" 4.8mm
3/16” ID & 7/16" OD 4.8mm ID & 11.1mm OD
712 4.38 lb/ft (6.52 kg/m) 225' (672 KPa)
12”304.8mm
1" 25.4mm1/2"
12.7mm
1"25.4mm
1/2” ID & 1 1/4" OD 12.7mm ID & 31.8mm OD
713 3.60 lb/ft (5.36 kg/m) 225' (672 KPa)
12”304.8mm
1/2"12.7mm
3/16"4.8mm
1/4" 6.4mm
7/8” ID & 1 1/2" OD 22.2mm ID & 38.1mm OD
714 3.62 lb/ft (5.39 kg/m) 225' (672 KPa)
12" 304.8mm
1/2" 12.7mm
3/16" 4.8mm
5/8” ID & 1 1/8" OD 15.9mm ID & 28.6mm OD
3/8" 9.5mm
716 1.55 lb/ft (2.31 kg/m) 125' (373 KPa)
6"152.4mm
1/8" 3.2mm
1/4" 6.4mm
3/8" 9.5mm
1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD
9Sika® Greenstreak WATERSTOPS
Concrete Accessories
DESIGN AND SIZES
745 1.79 lb/ft (2.66 kg/m) 175' (523 KPa)
9"228.6mm
9/16" 14.3mm
3/8" 9.5mm
3/16" 4.8mm
3/16” ID & 5/8" OD 4.8mm ID & 15.9mm OD
778 2.85 lb/ft (4.24 kg/m) 200' (598 KPa)
9" 228.6mm
7/8" 22.2mm
3/8" 9.5mm
1/2" 12.7mm
OntarioHydro
1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD
779 0.86 lb/ft (1.28 kg/m) 100' (299 KPa)
6"152.4mm
3/16" 4.8mm
3/16” ID & 1/2" OD 4.8mm ID & 12.7mm OD
780 0.98 lb/ft (1.46 kg/m) 100' (299 KPa)
3/4” ID & 1" OD 19.1mm ID & 25.4mm OD
6"152.4mm
3/16" 4.8mm
788 1.66 lb/ft (2.47 kg/m) 175' (523 KPa)
6" 152.4mm
13/32" 10.3mm
3/4" 19.1mm
Ontario Hydro9/32"
7.1mm3/16” ID & 5/8" OD
4.8mm ID & 15.9mm OD
827 1.63 lb/ft (2.43 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm
1/2" 12.7mm 1/8"
3.2mm
1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD
NO. STD. WT. HEAD PRESS.
717 1.52 lb/ft (2.26 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm
1/8" 3.2mm
1/2” ID & 1" OD 12.7mm ID & 25.4mm OD
718 2.22 lb/ft (3.30 kg/m) 175' (523 KPa)
9"228.6mm
1/8" 3.2mm
3/8" 9.5mm
1/4" 6.4mm
3/4” ID & 1 1/4" OD 19.1mm ID & 31.9mm OD
719 2.05 lb/ft (3.05 kg/m) 150' (448 KPa)
1/8" 3.2mm3/8"
9.5mm1/4"
6.4mm
9"228.6mm
1 1/8” ID & 1 1/2" OD28.6mm ID & 38.1mm OD
726 3.97 lb/ft (5.91 kg/m) 200' (598 KPa)
12" 304.8mm
3/8" 9.5mm
3/4" 19.1mm
7/8" 22.2mm
1 1/4” ID & 2" OD 31.8mm ID & 50.8mm OD
731 2.00 lb/ft (2.98 kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm
1/2" 12.7mm
1/4" 6.4mm
1/2” ID & 7/8" OD 12.7mm ID & 22.2mm OD
732 1.60 lb/ft (2.38 kg/m) 125' (373 KPa)
6" 152.4mm
3/8" 9.5mm
5/16” ID & 7/8" OD 7.9mm ID & 22.2mm OD
1/8" 3.2mm
CH2M HILL MWH
Black & Veatch
735 2.45 lb/ft (3.65 Kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm
1/8" 3.2mm
1/2” ID & 1" OD 12.7mm ID & 25.4mm OD
CH2M HILLMWH
Black & Veatch
736 1.41 lb/ft (2.10 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm1/4"
6.4mm
1/8" 3.2mm
5/16” ID & 5/8" OD 7.9mm ID & 15.9mm OD
905 3.80 lb/ft (5.65 kg/m) 260' (776 KPa)
350.0mm
12.7mm16.0 mm ID & 28.0mm OD
12.7mm9.7mm
915 0.68 lb/ft (1.01 kg/m) 65' (194 KPa)
EYELET
150.0mm
10.0mm20.0mm
3.0mm13.0mm ID
935 1.21 lb/ft (1.80 kg/m) 125' (373 KPa)
3.5mm
3.0mm250.0mm
64.0mm
25.0mm5.0mm
18.0mm IDEYELET
951 1.06 lb/ft (1.58 kg/m) 75' (224 KPa)
150.0mm
20.0mm 3.0mm6.0mm13.0mm ID
4.0mmEYELET
952 1.32 lb/ft (1.97 kg/m) 125' (373 KPa)
200.0mm
3.0mm6.0mm 4.0mm 3.5mm
13.0mm ID
20.0mmEYELET
953 1.77 lb/ft (2.64 kg/m) 150' (448 KPa)
25.0mm55.0mm
250.0mm
4.5mm 7.0mm
50.0mm
3.5mm3.0mm17.0mm IDEYELET
NO. STD. WT. HEAD PRESS.
738 2.73 lb/ft (4.06 kg/m) 150' (448 KPa)
7/8"22.2mm 3/8"
9.5mm
9"228.6mm
7/8” ID & 1 3/8" OD 22.2mm ID & 34.9mm OD
739 2.75 lb/ft (4.09 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
1/8" 3.2mm
1 1/2” ID & 2" OD 38.1mm ID & 50.8mm OD
7/8" 22.2mm
EYELET
NO. STD. WT. HEAD PRESS.
829 2.67 lb/ft (3.97 kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm
1/2" 12.7mm
1/8" 3.2mm
1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD
838 1.10 lb/ft (1.64 kg/m) 150' (448 KPa)
203.0mm
5.0mm 9.5mm6.4 mm ID & 12.7mm OD
RIBBED CENTER BULB/CONT’D
10Sika® Greenstreak WATERSTOPSConcrete Accessories
DESIGN AND SIZES
RIBBED WATERSTOPS PROVIDE THE
BEST SEALING CHARACTERISTICS
RIBBED TEAR WEBNO. STD. WT. HEAD PRESS.
698 0.78 lb/ft (1.16 kg/m) 65' (194 KPa)
6"152.4mm
1/8" 3.2mm
3/8" 9.5mm
5/8" 15.9mm
3/8" 9.5mm
699 1.00 lb/ft (1.49 kg/m) 100' (299 KPa)
9"228.6mm
1/8" 3.2mm
3/8" 9.5mm
5/8" 15.9mm
3/8" 9.5mm
NO. STD. WT. HEAD PRESS.
963 .87 lb/ft (1.30 kg/m) 100' (299 KPa)
225.0mm
3.0mm 10.0mm10.0mm ID & 16.0mm OD
964 .63 lb/ft (.94 kg/m) 50' (150 KPa)
150.0mm
3.0mm 10.0mmEYELET 10.0mm ID & 16.0mm OD
965 .77 lb/ft (1.15 kg/m) 75' (224 KPa)
10.0mm ID & 16.0mm OD
200.0mm
3.0mm 10.0mmEYELET
NO. STD. WT. HEAD PRESS.
972 .75 lb/ft (1.12 kg/m) 100' (299 KPa)
150.0mm
2.2mm9.0mm
4.5mm
12.0mm ID & 18.0mm OD
973 1.07 lb/ft (1.59 kg/m) 100' (299 KPa)
2.2mm
4.5mm220.0mm
12.0mm ID & 18.0mm OD
992 .92 lb/ft (1.37 kg/m) 100‘ (299 KPa)
200.0mm
20.0mm 4.0mm3.0mm14.0mm ID
EYELET
NO. STD. WT. HEAD PRESS.
700 3.78 lb/ft (5.63 kg/m) 150' (448 KPa)
9"228.6mm
3/4" 19.1mm
1 1/8"28.7mm
2 1/2"63.5mm3/8"
9.5mm
728 2.68 lb/ft (3.99 kg/m) 175' (523 KPa)
1" 25.4mm
9"228.6mm
1 1/4"31.8mm
7/16" 11.1mm
1/4" 6.4mm
1/2" 12.7mm
RIBBED CENTER BULB/CONT’D
NO. STD. WT. HEAD PRESS.
954 3.07 lb/ft (4.56 kg/m) 200' (598 KPa)
30.0mm
55.0mm250.0mm
50.0mm
10.0mm 3.0mm18.0mm ID EYELET
961 .63 lb/ft (.94 kg/m) 50' (50 KPa)
150.0mm
3.0mm 10.0mm10.0mm ID & 16.0mm OD
962 .77 lb/ft (1.15 kg/m) 75' (224 KPa)
3.0mm
200.0mm10.0mm
10.0mm ID & 16.0mm OD
11Sika® Greenstreak WATERSTOPS
Concrete Accessories
DESIGN AND SIZES
FLAT RIBBEDSHAPES ARE DRAWN TO
VARYING SCALES
825 3.22 lb/ft (4.79 kg/m) 200' (598 KPa)
9"228.6mm
1/2" 12.7mm
3/4" 19.1mm
1/16" 1.6mm
955 1.01 lb/ft (1.51 kg/m) 75' (224 KPa)
150.0mm
20.0mm
3.0mm4.0mm6.0mm EYELET
956 1.32 lb/ft (1.96 kg/m) 125' (373 KPa)
200.0mm
20.0mm
3.0mm6.0mm 4.0mmEYELET
957 1.75 lb/ft (2.60 kg/m) 150' (448 KPa)
4.5mm 7.0mm 3.0mm
250.0mm
25.0mmEYELET
NO. STD. WT. HEAD PRESS.
580 1.71 lb/ft (2.54 kg/m) 125' (373 KPa)
6"152.4mm
1/8" 3.2mm
3/8" 9.5mm 1/2"
12.7mm
646 2.37 lb/ft (3.53 kg/m) 175' (523 KPa)
9"228.6mm
1/8" 3.2mm
3/8" 9.5mm
5/8" 15.9mm
MWHBlack & Veatch
679 1.50 lb/ft (2.23 kg/m) 125' (373 KPa)
6"152.4mm
1/8" 3.2mm 3/8"
9.5mm5/8"
15.9mm
MWH Black & Veatch
773 2.40 lb/ft (3.57 kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm 1/2"
12.7mm1/8"
3.2mm
781 .43 lb/ft (.64 kg/m) 65' (194 KPa)
3/32" 2.4mm
4"101.6mm
3/16" 4.8mm
1/8" 3.2mm
782 .84 lb/ft (1.25 kg/m) 75' (224 KPa)
6"152.4mm
3/16" 4.8mm
1/8" 3.2mm
7/16" 11.1mm
783 1.39 lb/ft (2.07 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm
1/4" 6.4mm
1/8" 3.2mm
NO. STD. WT. HEAD PRESS.
784 1.60 lb/ft (2.38 kg/m) 150' (448 KPa)
6"152.4mm
1/2" 12.7mm
3/8" 9.5mm
785 1.22 lb/ft (1.82 kg/m) 100' (299 KPa)
9"228.6mm
3/16" 4.8mm
1/8" 3.2mm
786 2.07 lb/ft (3.08 kg/m) 175' (523 KPa)
9"228.6mm
3/8" 9.5mm
1/8" 3.2mm
1/4" 6.4mm
NO. STD. WT. HEAD PRESS.
958 2.95 lb/ft (4.39 kg/m) 200' (598 KPa)
30.0mm
250.0mm
10.0mm 3.0mmEYELET
970 1.27 lb/ft (1.89 kg/m) 125' (373 KPa)
260.0mm
19.0mm4.3mm
3.0mm20.0mm
3.5mm
975 1.07 lb/ft (1.59 kg/m) 100' (299 KPa)
250.0mm
3.0mm5.0mmEYELET
976 .97 lb/ft (1.44 kg/m) 125' (373 KPa)
205.0mm
4.5mm 10.0mm15.0mm 3.0mm
978 .72 lb/ft (1.07 kg/m) 75' (224 KPa)
150.0mm
4.5mm
3.0mm
10.0mm 15.0mmEYELET
995 .54 lb/ft (.80 kg/m) 65' (194 KPa)
150.0mm
3.0mmEYELET
12Sika® Greenstreak WATERSTOPSConcrete Accessories
DESIGN AND SIZES
SHAPES ARE DRAWN TO VARYING SCALES
NO. STD. WT. HEAD PRESS.
640 .92 lb/ft (1.37 kg/m) 65' (194 KPa)
140.0mm
13.0mm 5.0mm 8.0mm ID & 18.0mm OD
641 1.15 lb/ft (1.71 kg/m) 100' (299 KPa)
190.0mm
13.0mm 5.0mm 8.0mm ID & 18.0mm OD
642 1.68 lb/ft (2.50 kg/m) 150' (448 KPa)
240.0mm
19.0mm 5.0mm 10mm ID & 20.0mm OD
654 0.68 lb/ft (1.01 kg/m) 65' (194 KPa)
3 3/4"95.3mm
1/2" 12.7mm
1/8" 3.2mm
5/16" 7.9mm 1/2” ID & 13/16" OD
12.7mm ID & 20.6mm OD
NO. STD. WT. HEAD PRESS.
648 1.21 lb/ft (1.80 kg/m) 100' (299 KPa)
7"177.8mm
1/2" 12.7mm
3/4" 19.1mm
1/8" 3.2mm
1 1/4" 31.8mm
9/16" 14.3mm
New York E
DUMBBELL CENTERBULB
NO. STD. WT. HEAD PRESS.
753 3.10 lb/ft (4.61 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
1" 25.4mm
3/4” ID & 1 1/2" OD 19.1mm ID & 38.1mm OD
C.O.E.
754 3.70 lb/ft (5.51 kg/m) 150' (448 KPa)
9" 228.6mm
15/16"23.8mm
3/8" 9.5mm
2” ID & 2 3/4" OD 50.8mm ID & 69.9mm OD
C.O.E.
756 1.20 lb/ft (1.79 kg/m) 100' (299 KPa)
6"152.4mm
3/8" 9.5mm
1/4" 6.4mm
3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD
757 1.41 lb/ft (2.10 kg/m) 100' (299 KPa)
6"152.4mm
5/8" 15.9mm
1/4" 6.4mm
3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD
NO. STD. WT. HEAD PRESS.
758 2.06 lb/ft (3.06 kg/m) 125' (373 KPa)
9"228.6mm
1/2" 12.7mm
3/8" 9.5mm
3/8” ID & 3/4" OD 9.5mm ID & 19.1mm OD
933 2.87 lb/ft (4.27 kg/m) 150' (448 KPa)
230.0mm
25.0mm10.0mm
20.0mm ID & 35.0mm OD
936 1.71 lb/ft (2.54 kg/m) 125' (373 KPa)
20.0mm
260.0mm
10.0mm
5.0mm
13.0mm ID & 23mm OD
EYELET
BASE SEAL
NO. STD. WT. HEAD PRESS.
771 1.53 lb/ft (2.28 kg/m) 100' (299 KPa)
9"228.6mm
2"50.8mm
3/4" 19.1mm
9/16" 14.3mm
5/32" 4.0mm
NO. STD. WT. HEAD PRESS.
772 1.85 lb/ft (2.75 kg/m) 100' (299 KPa)
9"228.6mm
2"50.8mm 3/4"
19.1mm
9/16" 14.3mm 5/32"
4.0mm3/4"
19.1mmTexas Hwy
Type A
13Sika® Greenstreak WATERSTOPS
Concrete Accessories
DESIGN AND SIZES
NO. STD. WT. HEAD PRESS.
924 1.45 lb/ft (2.16 kg/m) 125' (373 KPa)
200.0mm
40.0mm16.0mm 20.0mm
4.5mm
3.0mm20.0mmTEAR WEB
925 1.84 lb/ft (2.74 kg/m) 150' (448 KPa)
TEAR WEB
250.0mm
25.0mm 50.0mm
5.0mm3.0mm
18.0mm
927 .89 lb/ft (1.32 kg/m) 75' (224 KPa)
150.0mm
20.0mm 3.0mm4.5mm
16.0mm 55.0mm
944 1.30 lb/ft (1.93 kg/m) 125' (373 KPa)
41.5mm
200.0mm
20.0mm
16.0mm
3.0mm4.5mm
959 1.41 lb/ft (2.10 kg/m) 150' (448 KPa)
250.0mm
50.0mm 15.0mm
4.0mm
25.0mm18.0mm
960 1.30 lb/ft (1.94 kg/m) 150' (448 KPa)
250.0mm4.0mm
50.0mm18.0mm 15.0mm
982 1.15 lb/ft (1.71 kg/m) 125' (373 KPa)
18.5mm3.9mm
195.0mm
990 6.81 lb/ft (10.14 kg/m)
65.0mm48.0mm
400.0mm
12.0mm
12.0mm
NO. STD. WT. HEAD PRESS.
774 .79 lb/ft (1.18 kg/m) 75' (224 KPa)
7"177.8mm
1/8" 3.2mm
7/16" 11.1mm
7/16" 11.1mm
Texas HwyType B
775 4.64 lb/ft (6.91 kg/m)
8"203.2mm
3 1/2"88.9mm
9"228.6mm 5°3/4"
19.2mm1/2"
12.7mm
C.O.E.
776 .83 lb/ft (1.24 kg/m) 100' (299 KPa)
6"152.4mm
1 1/8" 28.6mm
1/2" 12.7mm
1/8" 3.2mm
9/16" 14.3mm
New York D
777 2.75 lb/ft (4.09 kg/m)
5/8" 15.9mm
17”431.8mm
7/8" 22.2mm
5/32" 4.0mm
787 1.81 lb/ft (2.69 kg/m)
420.0mm
3.5mm 4.0mm
27.9mm 8.0mm
3.0mm
914 1.61 lb/ft (2.40 kg/m) 125' (373 KPa)
7 13/16"198.4mm
1 5/16"33.3mm 3/4"
19.1mm1/8" 3.2mm
1 1/2"8.1mm 5/8"
15.9mm
923 1.02 lb/ft (1.51 kg/m) 75' (224 KPa)
TEAR WEB150.0mm
20.0mm
16.0mm
4.5mm
55.0mm
3.0mm
928 1.32 lb/ft (1.97 kg/m) 125' (373 KPa)
200.0mm
40.0mm
3.0mm
4.5mm20.0mm
16.0mm
929 1.68 lb/ft (2.49 kg/m) 150' (448 KPa)
250.0mm
18.0mm
5.0mm
50.0mm
25.0mm
3.0mm
930 2.04 lb/ft (3.04 kg/m) 175' (523 KPa)
18.0mm
5.0mm
50.0mm 95.0mm
330.0mm
25.0mm
3.0mm
931 1.81 lb/ft (2.69 kg/m)
125.0mm135.0mm
50.0mm
3.0mm
5.0mm
25.0mm 18.0mm
25.0mm
3.0mm
Retro�t
BASE SEAL/CONT’D
NO. STD. WT. HEAD PRESS.
937 1.71 lb/ft (2.55 kg/m) 100' (299 KPa)
240.0mm
50.0mm
22.0mm 5.0mm15.0mm
938 1.85 lb/ft (2.76 kg/m) 100' (299 KPa)
5.0mm
50.0mm 25.0mm
240.0mm
15.0mm22.0mm
TEAR WEB
939 1.05 lb/ft (1.56 kg/m) 100' (299 KPa)
200.0mm
40.0mm 15.0mm20.0mm
3.5mm15.0mm
TEAR WEB
14Sika® Greenstreak WATERSTOPSConcrete Accessories
DESIGN AND SIZES
A NOTE ABOUT HEAD PRESSURE RATINGS:Head Pressure Ratings are based on parameters published in the Corps of Engineers document, Waterstops and Other Preformed Joint Materials for Civil Works Structures EM 1110-2-2101, dated 30 September 1995. Sample testing conducted by Sika® on select profiles has indicated a conservative tendency in these ratings. That said, the published Head Pressure Ratings should be considered to be ultimate values. An appropriate safety factor should be applied to these values. Contact a Sika Canada representative for more information.
NO. STD. WT. HEAD PRESS.
639 1.03 lb/ft (1.53 kg/m) 100' (299 KPa)
6"152.4mm
1/8" 3.2mm
1/2" 12.7mm 1 3/16"
30.2mm 1 5/8"41.3mm
1/8" 3.2mm
652 5.00 lb/ft (7.44 kg/m)
10 1/4"260.4mm
1" 25.4mm
4" 101.6mm
3/8" 9.5mm
3/4" 19.1mm
1/8" 3.2mm
1/2" 12.7mm
CRACK INDUCERNO. STD. WT. HEAD PRESS.
806 5.00 lb/ft (7.44 kg/m)
8"203.2mm
1/2" 12.7mm
3/4"19.1mm 4 1/8"
104.8mm
1/8" 3.2mm
USBR
926 2.26 lb/ft (3.36 kg/m) 150' (448 KPa)
250.0mm
70.0mm 18.0mm
5.0mm
50.0mm
3.0mm
5.0mm
TEAR WEB
NO. STD. WT. HEAD PRESS.
741 0.47 lb/ft (0.70 kg/m) 65' (194 KPa)
4"101.6mm
3/16" 4.8mm
3/8" 9.5mm
744 0.63 lb/ft (0.94 kg/m) 65' (194 KPa)
5"127.2mm
3/16" 4.8mm
15/32" 11.9mm
746 0.71 lb/ft (1.06 kg/m) 75' (224 KPa)
3/16" 4.8mm
6"152.4mm
3/8" 9.5mm
747 1.11 lb/ft (1.65 kg/m) 100' (299 KPa)
6"152.4mm
1/4" 6.4mm
5/8" 15.9mm
DUMBBELLNO. STD. WT. HEAD PRESS.
748 1.51 lb/ft (2.25 kg/m) 125' (373 KPa)
3/8" 9.5mm
6"152.4mm
3/4" 19.1mm
750 1.18 lb/ft (1.76 kg/m) 100' (299 KPa)
9"228.6mm
3/16" 4.8mm
9/16" 14.3mm
751 2.18 lb/ft (3.24 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
3/4" 19.1mm
752 2.55 lb/ft (3.79 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
1" 25.4mm
NO. STD. WT. HEAD PRESS.
755 2.99 lb/ft (4.44 kg/m) 200' (598 KPa)
12”304.8mm
3/8" 9.5mm
13/16" 20.6mm
932 .66 lb/ft (3.97 kg/m) 150' (448 KPa)
230.0mm
10.0mm 25.0mm
934 1.58 lb/ft (2.36 kg/m) 125' (373 KPa)
20.0mm
250.0mmEYELET
10.0mm5.0mm
15Sika® Greenstreak WATERSTOPS
Concrete Accessories
DESIGN AND SIZES
SPLIT FLANGE
LABYRINTH
SHAPES ARE DRAWN TO VARYING SCALES
NO. STD. WT. HEAD PRESS.
653 2.25 lb/ft (3.35 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
3/16" 4.8mm
3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD
720 1.20 lb/ft (1.79 kg/m) 100' (299 KPa)
3/16" 4.8mm
1/8" 3.2mm
9"228.6mm
3/32" 2.4mm
3/8” ID & 1/2" OD 9.5mm ID & 12.7mm OD
721 .50 lb/ft (.74 kg/m) 65' (194 KPa)
4"101.4mm
3/16" 4.8mm 3/32"
2.4mm
5/16” ID & 7/16" OD 7.9mm ID & 11.4mm OD
722 1.90 lb/ft (2.83 kg/m) 150' (448 KPa)
9"228.6mm
3/16" 4.8mm
3/8" 9.5mm
1/8" 3.2mm
3/8” ID & 3/4" OD 9.5mm ID & 19.1mm OD
NO. STD. WT. HEAD PRESS.
789 .84 lb/ft (1.25 kg/m) 25' (75 KPa)
3/16" 4.8mm
3 1/4"82.6mm
1 5/8"41.3mm
1 3/16"30.2mm
NO. STD. WT. HEAD PRESS.
723 .76 lb/ft (1.13 kg/m) 100' (299 KPa)
6"152.4mm
3/16" 4.8mm 3/32"
2.4mm
1/2” ID & 5/8" OD 12.7mm ID & 15.9mm OD
724 1.54 lb/ft (2.29 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm
3/16" 4.8mm
3.8” ID & 5/8" OD 9.5mm ID & 15.9mm OD
725 3.10 lb/ft (4.61 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
3/4” ID & 1 1/2" OD 19.1mm ID & 38.1mm OD1”
25.4mm
727 2.25 lb/ft (3.35 kg/m) 150' (448 KPa)
9"228.6mm
3/8" 9.5mm
3/16" 4.8mm
3/8” ID & 5/8" OD 9.5mm ID & 15.9mm OD
NO. STD. WT. HEAD PRESS.
730 1.02 lb/ft (1.52 kg/m) 100' (299 KPa)
6"152.4mm
3/16" 4.8mm
3/32" 2.4mm
13/16” ID & 1" OD 20.6mm ID & 25.4mm OD
759 1.49 lb/ft (2.22 kg/m) 125' (373 KPa)
6"152.4mm
3/8" 9.5mm
3/4" 19.1mm
760 2.20 lb/ft (3.27 kg/m) 150' (448 KPa)
9"228.6mm
3/4" 19.1mm 3/8"
9.5mm
NO. STD. WT. HEAD PRESS.
790 1.24 lb/ft (1.85 kg/m) 50' (149 KPa)
4 7/16"112.7mm
1 5/8"41.3mm3/16"
4.8mm
1 3/16"30.2mm
807 2.00 lb/ft (2.98 kg/m) 50' (149 KPa)
4 7/16"112.7mm
2 5/16"58.7mm
NO. STD. WT. HEAD PRESS.
830 1.81 lb/ft (2.69 kg/m) 50' (149 KPa)
6 1/4"158.8mm
1/4" 6.4mm
1/4" 6.4mm
1 5/8"41.3mm
835 1.80 lb/ft (2.68 kg/m) 50' (149 KPa)
6 1/4"158.8mm
3/16" 4.8mm
2 1/2"63.5mm
1 11/16"42.9mm
16Sika® Greenstreak WATERSTOPSConcrete Accessories
RETROFIT WATERSTOP SYSTEMS
Retrofit waterstops seal joints where new construction meets an existing structure and can be suitable for working joints. Systems include waterstop profile, stainless steel batten bars and anchor bolts. Epoxy 7300 is sold separately.
SPECIALTY SHAPES
NO. SYSTEM STD. WT. with hardware
581 1.51 lb/ft (2.25 kg/m)
EXISTING CONCRETE
NEW CONCRETE
S.S. BATTEN BARS.S. ANCHOR BOLT
EPOXY 7300
3 1/8"
7/16" 3 11/16"
609 2.92 lb/ft (4.35 kg/m)
S.S. BATTEN BARS.S. ANCHOR BOLT
EPOXY 7300EXISTING
CONCRETE
NEW CONCRETE
6"
3 3/16"
3/8"
1/2"
NO. SYSTEM STD. WT. with hardware
655 1.38 lb/ft (2.05 kg/m)
EXISTING CONCRETE
NEW CONCRETE
S.S. BATTEN BARS.S. ANCHOR BOLT
EPOXY7300
3"
7/16" 3"
667 8.27 lb/ft (12.31 kg/m)
EXISTING CONCRETE
EPOXY 7300
S.S. BATTEN BAR
S.S. ANCHOR BOLT
NEW CONCRETE
9"
6 3/8"
7/8"
11/16"
17Sika® Greenstreak WATERSTOPS
Concrete Accessories
SHAPES ARE DRAWN TO VARYING SCALES
These shapes have been developed to meet unique requirements of clients or other specifying groups. Consult a Sika Canada representative for more information or for special applications.
NO. STD. WT. HEAD PRESS.
770 3.15 lb/ft (4.69 kg/m)
300.0mm 20.0mm
87.0mm
220.0mm
6.0mm
3.0mm
52.0mm
57.0mm
791 0.86 lb/ft (1.28 kg/m) 35' (105 KPa)
5 1/4"133.4mm
1/8" 3.2mm
1/8" 3.2mm
2 1/8"54.0mm2 1/4"
57.1mm
792 1.10 lb/ft (1.63 kg/m) 35' (105 KPa)
3 1/8"79.4mm
5 1/4"133.4mm
1/8" 3.2mm
1/8" 3.2mm 2"
50.8mm
2 1/4"57.1mm
W1-2 Calif.
NO. STD. WT. HEAD PRESS.
729 .64 lb/ft (.95 kg/m) 35' (105 KPa)
5"127.0mm
3/16" 4.8mm
1 1/2"38.1mm
3/32" 2.4mm
5” Mass.
762 1.51 lb/ft (2.25 kg/m) 100' (299 KPa)
127.0mm22.0mm
10.0mm 9.5mmSoil Conservation Service Type F
765 .64 lb/ft (.95 kg/m)
2 1/8"54.0mm
1/8" 3.2mm
4"101.6mm
3/16" 4.8mm
NO. STD. WT.
606 2.92 lb/ft (4.35 kg/m)
6"152.4mm
3 1/2"88.9mm
1/8"3.2mm
1/2" 12.7mm
1/2" 12.7mm
3/4" 19.1mm
5/16" ID & 15/16” OD 7.9mm ID & 23.8mm OD
650 .64 lb/ft (2.44 kg/m)
2 1/2"63.5mm
8"203.2mm
1/4" 6.4mm
18Sika® Greenstreak WATERSTOPSConcrete Accessories
SPLICING IRONS FOR FIELD WELDINGAs noted, a quality waterstop installation requires quality welds. Sika Splicing Irons are specifically designed for welding thermoplastic waterstop and are constructed of the highest quality components for superior and long lasting performance. No other means or methods can be used.Temperature controls are adjustable for various conditions and products. Irons are typically 120V operation, but 240V is available for the 213 and 214 irons.The 213 and 215 irons have an integral thermometer to display the iron temperature for accurate welding. The splicing iron should be large enough to melt the enire cross-section of the waterstop profile. All irons are supplied with a teflon coated cover necessary for welding. Replacement covers are available for purchase.
No. 214 2" x 14" Plate
TYPICAL PVC FABRICATIONSSika strongly recommends factory fabricated transitions and intersections. Typical fabrications for the most common shapes are inventoried by Sika and available to meet construction schedules. Sika can provide customized fabrications to suit unusual configurations or a convergence of differing profiles.
CHEMICAL RESISTANT WATERSTOP Sika® Greenstreak’s companion brand, Westec®, offers waterstop solutions for secondary containment in petrochemical and industrial applications. Westec® Envirostop™ TPE-R (Thermoplastic Elastomeric Rubber) Waterstops resist a wide range of oils, solvents, and aggressive chemicals. Alcohols, ketones, glycols, esters and aqueous solutions of acids, bases, and salts have little effect on Westec® Envirostop™ TPE-R Waterstop. TPE-R has excellent ozone resistance, low temperature flexibility, excellent high temperature (up to 120 °C [250 °F]) performance and is heat weldable. Westec® Envirostop™ TPE-R Waterstop can also be defined as a Thermoplastic Vulcanizate, TPV.
Westec® Envirostop™ TPE-R Waterstop is certified to NSF/ANSI Standard 61 for Drinking Water System Components. Contact a Sika Canada representative or visit www.Chemstop.com for more information.
No. 213 4 ½" x 14" Plate
No. 215 9" x 9" Plate
Vertical L, T, and Cross Fabrications Flat L, T, and Cross Fabrications
FABRICATIONS/SPLICING IRONS
19Sika® Greenstreak WATERSTOPS
Concrete Accessories
No. 215 9" x 9" Plate
Sika offers SikaFuko® VT injection hose, the world's number one injection hose system. SikaFuko® VT systems are available in two sizes and can deliver Portland cement, microfine cement, or a variety of resins to seal cracks or voids in the joint area. SikaFuko® VT has a unique "re-injectable" design, which allows the hose to be cleaned. This key feature allows for a complete maintenance program if leaks appear and future re-injections are required.SikaFuko® Eco 1 (formerly Duroject) is an injection hose for delivering cements or resins for planned sealing of construction joints. It is for single injection applications. Sika offers a variety of injection materials for SikaFuko® VT injection hose systems.
Hydrotite is a world renowned hydrophilic waterstop. Composed of modified chloroprene rubber protected with a special delay coating, Hydrotite expands when exposed to water, creating an effective compression seal within joints where limited movement will occur.
Hydrotite is used extensively in sealing concrete construction joints, pipe penetrations, precast concrete segments, tunnel lining segments and for repair of existing joints or retrofit applications. Several shapes and sizes are available.
SikaSwell®-A (formerly Duroseal Gasket) is a water-swelling acrylate-ester that expands upon contact with water to form a compression seal in nonmoving concrete joints. SikaSwell®-A is a available in three sizes and is adhered to varying substrates with Sika® MK Adhesive or Quellpaste Type E.
Sika® Swellstop® is a flexible butyl rubber and swellable clay waterproofing compound that expands upon contact with water to form a compression seal in nonmoving concrete joints. Swellstop® is available in two sizes and must be used in conjunction with Swellstop Primer Adhesive to create a watertight bond.
HYDROPHILIC WATERSTOPS SOLUTIONS FOR APPLICATIONS WHERE EXPOSURE TO MOISTURE IS CONSTANT.
Lockstop is a single component and self-sealing mastic waterstop which bonds to concrete to prevent moisture from penetrating nonmoving joints. Lockstop must be used in conjunction with Lockstop Primer Adhesive to create a watertight bond.
MOST STRIP-APPLIED WATERSTOPS AND INJECTION HOSE SYSTEMS ARE SUITABLE FOR NONWORKING JOINTS ONLY.
STRIP-APPLIED WATERSTOPS AND INJECTION HOSE SYSTEMS
The Information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelflife. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request or may be downloaded from our website at: www.sika.ca
SIKA CANADA INC.Head Office601, avenue DelmarPointe-Claire, Quebec H9R 4A9
Other locationsTorontoEdmontonVancouver
An ISO 9001 certified companyPointe-Claire: ISO 14001 certified EMS
© S
ika
Cana
da In
c./S
ika®
Gre
enst
reak
Wat
erst
ops/
07.
2015
/ar
SIKA SOLUTIONS FROM ROOF TO FOUNDATIONS
CONCRETE ACCESSORIESSika® HydrotiteHYDROPHILIC WATERSTOPS
UNIQUE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS
WATERPROOFINGSikaFuko® INJECTION HOSE SYSTEMS
Greenstreak
SikaProof® A Waterproofing Membrane System
Also Available:
Joint Sealing
Sikaflex®Sikasil® Sikadur® Combiflex
Grouting and Anchoring
SikaGrout®Sikadur®Sika AnchorFix®
Roofing Systems
Sarnafil®Sikaplan®Sikalastic®
Concrete Production
Sika® ViscoCrete®SikaRapid® Sika® Air
Waterproofing Systems
SikaProof®, SikaFuko®Sika® Greenstreak®SikaSwell®, SikaFix®
Floor & Wall Systems
Sikafloor® Sikagard® Sikagard® Duroplast
Concrete Repair & Protection
Sika® MonoTop®SikaTop®, SikaRepair® Sikagard®
Structural Strengthening
Sikadur®, Sika® CarboDur®SikaWrap®Sika® CarboShear
Sika Canada Inc., a member of the Sika Group, is a leader in the field of speciality chemicals, for construction and manufacturing industries. Our product lines feature high quality roofing systems, concrete admixtures, mortars and resins, sealants and adhesives, structural strengthening components, industrial and decorative flooring, as well as protective coatings and waterproofing systems. Our expertise is borne out of a global presence and served by strong, local support. Sika has earned the trust of our industries for over 100 years, by delivering the highest standards of commitment and partnership.
CONCRETE ACCESSORIESSika® Westec® BARRIER TECHNOLOGIESWATERSTOPS FOR INDUSTRIAL APPLICATIONS
1-800-933-SIKAw w w . s i k a . c a