PD Public Auction G · AFM FABTEK Model MPF10-175 175 Ton Hydraulic Press Brake with 10’ x 175...
Transcript of PD Public Auction G · AFM FABTEK Model MPF10-175 175 Ton Hydraulic Press Brake with 10’ x 175...
Turn
in
g Your Assets into Dollars
Public AuctionMACHINE SHOP
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
PLANT CLOSED
MYERS QUALITY MACHINECNC, FABRICATING & MANUAL MACHINERY
1120 NORTH MAIN STREET - RANDLEMAN, NC 27317TUESDAY, DECEMBER 6TH @ 10:00 A.M. EST
Inspection: Monday, December 5th, From 8:00 A.M. - 4:00 P.M. EST
AFM FABTEK 10' X 1/4" HYDRAULIC SHEAR
JOHNFORD DMC-3100 CNC VERTICAL BRIDGE MILL
AMERECON SR-D-8-200 HYDRAULIC INITIAL PINCH PLATE BENDING ROLL
YAMA SEIKI GS-4000L CNC TURNING CENTER
18"CHUCK2012
120"TABLE
1998 1999
105856_Myers.indd 1 11/9/16 3:19 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, DECEMBER 5TH FROM 8:00 A.M. - 4:00 P.M. EST
2
CNC VERTICAL BRIDGE MILLJOHNFORD Model DMC-3100 CNC Vertical Bridge Mill with 43” x 120” Table Capacity, 120” X-Axis Travel, 51” Y-Axis, 32” Z-Axis, 51” Approx. Between Housing, 50 Taper Spindle Speeds to 6,000 RPM, 40 ATC, 35 HP, 2 Speed Gear Box, 13,200lb Table Load, Chip Conveyor, Fanuc Series 18-M CNC Control, sn:VT0005, mfg.2000
JOHNFORD Bridge Mill Tooling
CNC TURNING CENTERYAMA SEIKI Model GS-4000L CNC Turning Center with 18” 3-Jaw Chuck, Tailstock, 30.31” Maximum Swing Diameter, 24.4” Maximum Turning Diameter, 60” Centers, 4-1/2” Bar Capacity, Spindle Speeds to 2000 RPM, 13.77” X-Axis Travel, 62.99” Z-Axis, 12 Station Turret, Chip Conveyor, Fanuc Series Oi-TD CNC Control, sn:97F032, mfg.2012
YAMA SEIKI Tooling
NAKAMURA-TOME Model Slant S-1 CNC Turning Center with 8” 3-Jaw Chuck, 12 Station Turret, Tailstock, 26” Swing, 16” Centers, Approx.1-1/2” Hole, Chip Conveyor, Fanuc 11TE CNC Control, sn:C22203
NAKAMURA-TOME Model Slant S-3B CNC Turning Center with 12 Station Turret, Tailstock, Approx. 32” Swing, Approx. 2-1/4” Hole, Chip Conveyor, No Chuck, Fanuc 10T CNC Control sn:C30923
JOHNFORD DMC-3100 CNC VERTICAL BRIDGE MILL
NAKAMURA-TOME SLANT S-1 CNC TURNING CENTER
YAMA SEIKI GS-4000L CNC TURNING CENTER
2012
>NAKAMURA-TOME SLANT
S-3B CNC TURNING CENTER
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if Paying via Company Check
visit www.asset-sales.com for more information
120"TABLE
18"CHUCK
105856_Myers.indd 2 11/9/16 3:20 PM
AUCTION SALE DATE & TIME – TUESDAY, DECEMBER 6TH @ 10:00 A.M. EST
3
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!
CNC VERTICAL MACHINING CENTERSJOHNFORD Model VMC-550A 3-Axis CNC Vertical Machining Center with 18” x 27-1/2” Table Capacity, 20 ATC, 40 Taper Spindle Speeds to Approx. 6,000 RPM, Coolant, Fanuc Series O-M CNC Control, sn:MA6056
KIWA USA Model 510-Colt 3-Axis CNC Vertical Machining Center with 16-1/2” x 27-1/2” Table Capacity, 20.08” X-Axis, 16.14” Y-Axis, 18.11” Z-Axis, 16 ATC, 40 Taper, 4,000 RPM, Coolant, Fanuc Series O-M CNC Control
KIA Model VA-50 3-Axis CNC Vertical Machining Center with 20” x 63” Table Capacity, 29.92” X-Axis Travel, 20.08” Y-Axis, 20.08” Z-Axis, 20 ATC, 50 Taper Spindle Speeds to Approx. 3150 RPM, Coolant, Fanuc 10M CNC Control, sn:VA95020
CNC VERTICAL MILLING MACHINE
A-TRUMP Model K3VLC 3-Axis CNC Vertical Milling Machine with 10” x 50” Table, Variable Spindle Speeds 70-4200 RPM, 3 HP, Coolant, Centroid M-15 CNC Control, sn:K3VLC-193
VERTICAL MILLING MACHINES
RBI Vertical Milling Machine with 9” x 42” Table, Spindle Speeds 60-4500 RPM, 2 HP, R-8 Spindle, Power Feed Headstock, sn:77050504
BRIDGEPORT Model Series I Vertical Milling Machine with 9” x 48” Table Capacity, 2 HP, Variable Spindle Speeds to 4200 RPM, Collet Holder, Table Power Feed, Shaping Attachment, 2-Axis Acu-Rite II DRO
SBL Model 3VH Vertical Milling Machine with 10” x 50” Power Feed, 3 HP, Collet Holder, Work Light, Variable Spindle Speeds 60-4200 RPM
VAN NORMAN Universal Milling Machine with 10” x 45” Table & Tooling
SBL South Bend Mill with 10” x 50” Table Capacity, Acu-Rite 2-Axis DRO, Parts Machine
BRIDGEPORT Vertical Milling Machine with True Trace, 9” x 60” Table, 80 - 2720 RPM, 1 HP, sn:J-91956
BRIDGEPORT Model 94831 Vertical Milling Machine (Two Table) with 9” x 42” Table Capacity, 80-2720 RPM, 1 HP, sn:J-108456
KIWA USA 510-COLT 3-AXIS CNC VERTICAL MACHINING CENTER
JOHNFORD VMC-550A 3-AXIS CNC VERTICAL MACHINING CENTER
A-TRUMP K3VLC 3-AXIS CNC VERTICAL MILLING MACHINE
RBI VERTICAL MILLING MACHINE
SBL 3VH VERTICAL MILLING MACHINE
BRIDGEPORT VERTICAL MILLING MACHINES
3AVAIL.
WHACHEON 24" X 73" GAP BED ENGINE LATHE
105856_Myers.indd 3 11/9/16 3:20 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, DECEMBER 5TH FROM 8:00 A.M. - 4:00 P.M. EST
4
REED-PRENTICE 24" X 124" ENGINE LATHE
AFM FABTEK MPF10-175 175 TON HYDRAULIC PRESS BRAKE
ESAB PLASMA CUTTER & LINCOLN WELDING POWER SOURCES
ENGINE LATHESREED-PRENTICE 24” x 124” Engine Lathe with 18” 3-Jaw Chuck, 24” Swing Over Bed, 124” Centers, Tailstock, Taper Attachment, 2-1/2” Hole, Tool Post, Chip Pan, Rapid Traverse, Threading, Speeds to 530 RPM, sn:27906
WHACHEON 24” x 73” Gap Bed Lathe with 12” 3-Jaw Chuck, Approx. 24” Swing Over Bed, 73” Centers, Tailstock, 3” Hole, Tool Post, Rapid Traverse, Threading, 28-1350 RPM, Coolant, Chuck Guard, sn:240040
LEBLOND 20” x 58” Engine Lathe with 12” 3-Jaw Chuck, 20” Swing, 58” Centers, Taper Attachment, 2” Hole, Threading, sn:4D1225
SUMMIT 18” x 38” Engine Lathe with 10” 3-Jaw Chuck, Approx. 18” Swing Over Bed, 38” Centers, Tailstock, 3” Hole, Tool Post, Inch / Metric Threading, 22-1500 RPM, Chip Pan, Coolant, sn:3220823
ROCKWELL 10” x 20” Mini Engine Lathe with 6” 3-Jaw Chuck, 10” Swing Over Bed, 20” Centers, 1” Hole, Threading, Tool Post, Tailstock, Chuck Guard
HARDINGE Super-Precision Model DV-59/DSM-59 2nd Operation Lathe with 1-1/4” Hole, 6 Turret Station, Dove Tail Bed, Cut Off Crossslide, Retractable Bar Feed, sn:DV-59-18193
SUMMIT 18" X 38" ENGINE LATHE
AFM FABTEK MK6-31 10' X 1/4" HYDRAULIC SHEAR
HYDRAULIC PRESS BRAKE
AFM FABTEK Model MPF10-175 175 Ton Hydraulic Press Brake with 10’ x 175 Ton Capacity, (2) 18” Sheet Supports, 2-Axis Backgauge, Flush Mount, Dual Foot Switch, Angle Adjustment, sn:CHPB/9-80164-T, mfg.1998
Assorted Press Brakes Dies
HYDRAULIC SHEARAFM FABTEK Model MK6-31 10’ x 1/4” Hydraulic Shear with (3) 37” Sheet Support Arms, Approx. 39” Left Hand Squaring Arm, 2-Axis Backgauge, Flush Mount, Foot Switch, Roller Ball Table, Part Count, sn:CHGS/9-80146-TB, mfg.1998
Download a lot book at www.asset-sales.com
1998 1998
105856_Myers.indd 4 11/9/16 3:20 PM
AUCTION SALE DATE & TIME – TUESDAY, DECEMBER 6TH @ 10:00 A.M. EST
5
UNIVERSAL TURRET LATHEJONES & LAMSON Model #5 Universal Turret Lathe with 6 Position Turret, 10” 3-Jaw Chuck, 2-1/2” Thru-Hole, 30-1500 RPM, sn:202205
HORIZONTAL MILLING MACHINESKEARNEY & TRECKER Milwaukee Horizontal Milling Machine with 12” x 50” Table, 25-1500 RPM, 5 HP
KEARNEY & TRECKER Milwaukee Horizontal Milling Machine with 13-1/2” x 64” Table, 20-1000 RPM, sn:13-3184
VAN NORMAN Model 16 Horizontal Milling Machine with 10” x 40-1/2” Table, sn:16L-3019-156
HORIZONTAL BAND SAWSDOALL Model C-4 Horizontal Band Saw Job Selector with 10” x 18” Capacity, 3/4” Blade Size, Approx. 10’ Roller Conveyor, sn:234-834379
PRO-MASTER Model BS12A Horizontal Band Saw with Approx. 9” x 12” Capacity, 1” Blade, 45-240 RPM
HYDRAULIC PLATE BENDING ROLLAMERECON Model SR-D-8-200 8’ x 1/4” Hydraulic Initial Pinch Plate Bending Roll with Work Support Arm, Drop End, Remote Control, sn:904398018, mfg.1999
DOALL C-4 HORIZONTAL BAND SAW
MARVEL SERIES 81APC AUTOMATIC TILT FRAME VERTICAL BAND SAW
OKAMOTO M1624DX HYDRAULIC SURFACE GRINDER OKAMOTO ACC-124N HYDRAULIC SURFACE GRINDER
HYDRAULIC SURFACE GRINDERSOKAMOTO Model M1624DX Hydraulic Surface Grinder with 16” x 24” Electro Magnetic Table, Incremental Down Feed, Over Wheel Dresser, Chuck Master Control, sn:66023
OKAMOTO Model ACC-124N Hydraulic Surface Grinder with 12” x 24” Electro Magnetic Table, Incremental Down Feed, Coolant, Over Wheel Dresser, sn:7111
DOALL Model DH-612 Reciprocating Surface Grinder with 6” x 12” Permanent Magnetic Chuck, sn:138-672414
AMERECON SR-D-8-200 8' X 1/4" HYDRAULIC INITIAL PINCH PLATE BENDING ROLL
HYDRAULIC VERTICAL BANDSAWMARVEL Model Series 81APC Automatic Tilt Frame Vertical Band Saw with 45° Power Tilt, Programmable Shuttle Feed, Heavy Duty Roller Conveyor, PCII Programmable Control, Coolant, Work Light, Clamping, sn:E494911PC, mfg.2001
GROB Model Type-4V-24 Vertical Band Saw with 24” x 28” Hydraulic Feed Table, 1/4” Blade, Adjustable Blade Speeds, Welding Attachment, sn:2102
2001
1999
105856_Myers.indd 5 11/9/16 3:20 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, DECEMBER 5TH FROM 8:00 A.M. - 4:00 P.M. EST
6
CYLINDRICAL GRINDERSSCHAUDT Hydraulic Cylindrical Grinder with Approx. 16” x 40” Capacity, Variable Workhead Speeds, Hydraulic Tailstock, Adjustable Taper Table, sn:102125
JONES-SHIPMAN #1310 Model 60159 Cylindrical Grinder with Approx. 8” x 18” Capacity, 6” 3-Jaw Chuck, Adjustable Taper Table, sn:1693/44
METAL CHOP SAWSOGO Model MC-350F Heavy Duty Metal Chop Saw with Mitre Cuts with 12” Blade Capacity, Vise & Coolant
ANGLE BENDING ROLLCOLE-TUVE Model ARS-3 3” x 3” x 3/8” Capacity Angle Bending Roll with Leg In / Out Attachment, 6 Ram Rolling Speed, 160 Maximum Hydraulic Pressure Bar (2200 PSI), Remote Operators Stand & Controls, sn:SC-1-128, mfg.1998
IRON WORKERIRONCRAFTER Model HMW30-30 30 Ton Hydraulic Ironworker 1/2” x 6” Flat Bar, 1” Round, Mobile, Press Brake Attachment, Notcher, Bar Stop, sn:84C5938
TUBE BENDERHUTH Model LR33464-1 Portable Hydraulic Tube Bender with Flanging, Dies
PRECISION HONING MACHINE
SUNNEN Model MBB-1800J Precision Honing Machine with Power Stroking, sn:74053
Large Assortment of Hone Tooling
KEYSEATERDAVIS Model #5 Keyseater with 20-1/2” x 31” Slotted Table, Overarm & Tooling, sn:5-469
VIBRATORY FINISHERROSEMONT 36” Diameter Vibratory Finishing Machine, Liner
TAP DISINTEGRATORCAMMANN Model C67 Metal Tap Disintegrator with 12” x 16” Table, Adjustable Column, Coolant, sn:25272
FINGER BRAKECHICAGO DRIES & KRUMP Model BP0-314-6 Hydraulic Finger Brake with 36-1/2” Capacity, sn:306367
PRESSES, H-FRAMEDAKE 25 Ton H-Frame Press with 33-1/2” Between Housings, Adjustable Rail
DAKE 70 Ton H-Frame Press with 44” Between Housings, Adjustable Rail, Pneumatic / Elec-Draulic, sn:712378
JOHNSON Model 16FWPC Mechanical Press with 16 Ton Capacity, 1-1/2” Stroke, 9-1/2” x 16” Table, sn:61202
ELECTRIC FURNACEK.H. HUPPERT Type ST Style HUPPCO-2304-KT Electric Furnace, sn:422
PARTS WASHERBETTER ENGINEERING MFG Model Inpulse II Heavy Duty Parts Washer with 24” Diameter Basket, Control, sn:16718
WELDING POWER SOURCES & PLASMA
CUTTERSESAB Powercut #1250 Portable Plasma Cutter, sn:EN50192
ESAB Model PCM-875 Portable Plasma Cutter
LINCOLN Arc Welder Ideal Arc SP-200 Power Source
LINCOLN Electric 275 Precision Tig Portable Power Welder, sn:U1130-103023
SCHAUDT HYDRAULIC CYLINDRICAL GRINDER SOGO MC-350F HEAVY DUTY METAL CHOP SAW
IRONCRAFTER HMW30-30 30 TON HYDRAULIC IRONWORKER
DAVIS #5 KEYSEATER CHICAGO DRIES & KRUMP HYDRAULIC FINGER BRAKE
COLE-TUVE ARS-3 3" X 3" X 3/8" ANGLE BENDING ROLL
DAKE 70 TON H-FRAME PRESS
105856_Myers.indd 6 11/9/16 3:21 PM
AUCTION SALE DATE & TIME – TUESDAY, DECEMBER 6TH @ 10:00 A.M. EST
7
FORKLIFTHYSTER 5,400lb LP Forklift with 2-Stage Mast, Pneumatic Tires, Cage, Mirrors, Lights, sn:A177B20209H
MISCELLANEOUSAir Compressors (ATLAS CORP.) ● Bender with Dies ● Small – Large Arbor Press ● (5) NICHOLS Hand Mills ● Granite Plates ● ROCKWELL / WILSON Hardness Testers ● 14” Optical Comparator ● KURT Vises ● BRIDGEPORT Tooling & Accessories ● C-Clamps ● Hand Tools ● Inspection Tooling ● Steel Shelving ● Steel Carts ● 40 & 50 Taper Tooling ● Carbide Inserts ● End Mills ● Collets ● Taps ● Welding Equipment ● Parts Washers ● Rigging Equipment ● Boring Bars ● Dividing Heads ● Rotary Tables ● HAAS 4th Axis Indexers ● Honing Tools ● Metal Tables ● Scrap Metal ● Bench Grinders ● Vibratory Finishers ● Hoppers ● Cherry Picker ● Banding Cart ● Lathe Tooling ● Chucks ● Steady Rests ● Drill Presses ● Tool Cabinets ● Belt Sanders ● DAREX V190 Drill Sharpener ● Broaching Tools ● Tool Bins ● Right Angle Heads ● HAAS Centers ● Mechanical Benders ● Hand Chop Saws ● All Peripheral Equipment ● Plus Much More!!
HARDINGE SUPER-PRECISION DV-59/DSM-59 LATHE
ROCKWELL 10" X 20" MINI ENGINE LATHE KEARNEY & TRECKER MILWAUKEE HORIZONTAL MILLING MACHINE
2AVAIL.
HYSTER 5,400LB LP FORKLIFT
105856_Myers.indd 7 11/9/16 3:21 PM
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – NC License #6625 & 6003
YAMA SEIKI GS-4000L CNC TURNING CENTER
Directions From Greensboro Airport:
Exit Airport to I-73. Take exit 95 for US-220 toward I-73S Asheboro. Merge onto I-73. Take the US-220 Business N exit toward Level Cross. Turn left onto US-220 BUS S. Turn right to stay on US-220 BUS S. Plant will be on the right. Follow auction signs.
HOTELSCOURTYARD GREENSBORO
4400 W. Wendover Ave. - Greensboro, NC 27407 (336) 294-3800
HOLIDAY INN EXPRESS & SUITES HIGH POINT
10050 N. Main St. - Archdale, NC 27263 (336) 861-3310
PUBLIC AUCTIONMACHINE SHOP CLOSED
MYERS QUALITY MACHINECNC, FABRICATING & MANUAL MACHINERY
RANDLEMAN, NCTUESDAY, DECEMBER 6TH
@ 10:00 A.M. EST
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
2012
Can’t Attend the Sale? Still Want to Bid?Visit Our Website at www.asset-sales.com
For More Bidding Options.Check Out Our Upcoming Auction Calendar!
You Can Also Sign Up to Receive Email Notifications by Joining Our Mailing List!
105856_Myers.indd 8 11/9/16 3:21 PM