PB100 10G/40G/100G 32 Port Packet Broker System...The PB100 10G/40G/100G Packet Broker System offers...
2
Have Questions? [email protected] +49 6103.3769904 - Germany +1-716.242.8500 - USA garlandtechnology.com Key Features • SNMP/Syslog support • Aggregate network traffic to single or multiple tools • Session/flow aware load balancing • Up to 4,000 filter rules • Packet modification • Flow replication and port mirroring • Multi-device stacking • Data burst buffering • Forward latency • CLI management • Telnet/SSH login • Hot swappable & redundant AC power supplies ® DATA SHEET Competitive Edge • Session aware load balancing • MPLS heading stripping • VLAN tagging and stripping The PB100 10G/40G/100G Packet Broker System offers full functionality, including: filtering, aggregation and load balancing of network traffic. This easy to deploy and cost effective solution is scalable when migrating to 10G, 40G and 100G network speeds while providing one or many monitoring tools access to every bit, byte and packet. PB100 10G/40G/100G 32 Port Packet Broker System Supports Filtering, Aggregating and Load Balancing Monitor and Manage Your Network APPLICATIONS: High density solution Packet analysis Root cause analysis Historical lookback Validate policy changes TECHNOLOGY PARTNERS: Garland Technology’s PB100 Packet Broker System has been approved for use by: FILTERS: • VLAN • MPLS • IP ® Ports can be individually configured for optimum flexibility *See port configuration on next page. • (32) 100G-SR ports with QSFP-28 • (132) 25G ports for each 100G port; each 100G port can be configured into (4) 25G ports • (32) 40G-SR4 ports with QSFP-40 • (132) 10G ports for each 40G port; each 40G port can be configured into (4) 10G ports
Transcript of PB100 10G/40G/100G 32 Port Packet Broker System...The PB100 10G/40G/100G Packet Broker System offers...
Have Questions?
[email protected] +49 6103.3769904 - Germany+1-716.242.8500 - USA garlandtechnology.com
Key Features
• SNMP/Syslog support
• Aggregate network traffic to single or
multiple tools
• Session/flow aware load balancing
• Up to 4,000 filter rules
• Packet modification
• Flow replication and port mirroring
• Multi-device stacking
• Data burst buffering
• Forward latency
• CLI management
• Telnet/SSH login
• Hot swappable & redundant AC power
supplies
®
DATA SHEET
Competitive Edge• Session aware load balancing
• MPLS heading stripping
• VLAN tagging and stripping
The PB100 10G/40G/100G Packet Broker System offers full functionality, including: filtering, aggregation and load balancing of network traffic. This easy to deploy and cost effective solution is scalable when migrating to 10G, 40G and 100G network speeds while providing one or many monitoring tools access to every bit, byte and packet.
PB100 10G/40G/100G 32 Port Packet Broker System Supports Filtering, Aggregating and Load Balancing Monitor and Manage Your Network
APPLICATIONS: High density solution Packet analysis
Root cause analysis Historical lookback Validate policy changes
TECHNOLOGY PARTNERS: Garland Technology’s PB100 Packet Broker System has been approved for use by:
FILTERS: • VLAN• MPLS • IP
®
Ports can be individually configured for optimum flexibility *See port configuration on next page.
• (32) 100G-SR ports with QSFP-28
• (132) 25G ports for each 100G port; each 100G port can be configured into (4) 25G ports
• (32) 40G-SR4 ports with QSFP-40
• (132) 10G ports for each 40G port; each 40G port can be configured into (4) 10G ports
®
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate as of the date of publication, is subject to change without notice. Garland Technology assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains. ©2017 Garland Technology LLC. All Rights Reserved
020317Garland Technology | New York + Texas + Germany | GarlandTechnology.com | [email protected]
Filtering TAP options
Model # Ports Network Speed 40G Port 100G
PortPower
Consumption Watts SNMP /Syslog support
PB100G32AC 10/40/100G (32) QSFP+ (32) QSFP28 AC Power Supplies 500 Yes
1U Chassis Specifications:Support for: QSFP+, QSFP28, SFP+ (SR, LR, ER)Operating Temp.: 0C to 50C / 32F to 122F Operating Humidity: 20% to 70% non-condensingAirflow: front to backVoltage: AC: 100v - 240v 50/60Hz
PB100 10G/40G/100G 32 Port Packet Broker System Supports Filtering, Aggregating and Load Balancing Monitor and Manage Your Network
PB100G32AC Dimensions: 1.75”H x 17.3”W x 16”D (44.45 mm H x 439.42mm W x 406.4mm D)
Port Configuration
Available Pluggables & Cables:Model # Description
QSFP+40GBiDi QSFP+ 40Gigabit-SR Multi-Mode Fiber MPO-12 Connector
QSFP+40G QSFP+ 40Gigabit-SR Multi-Mode Fiber MPO-12 Connector
QSFP+40-LR4 QSFP+ 40Gigabit-LR4 Single Mode Fiber LC Connector
QSFP28-4SFP28-Cable_1 100 Gigabit Ethernet QSFP28 to (4) x 25 Gigabit Ethernet SFP28 Splitter Cable, 1 Meter
Telefon: +49 6103 37 215 910
E-Mail: [email protected] http://www.neox-networks.comCopyright© 2017 NEOX NETWORKS GmbH,
all rights reserved.
