Patricia Johnson 2043 N 51st Street Phoenix, AZ 85008

602-733-8162 | pjohnson9351@gmail.com

Objective: To obtain a position in a progressive company wherein my abilities and knowledge of

electronics will be a valued asset.

Experience:

Cline Labs Inc., Phoenix, AZ PC Boards 1/2014 - 05/2014 (Temp/Contract) Title: P C Assembler

Built assemblies from technical drawings Soldered P.C. boards and wired harnesses Assembled proto-types for Engineers Contract ended resulted in departure

Sargent Aerospace & Defense, Tucson, AZ Aircraft Parts for Military Applications 08/2011 - 08/2013 (Full Time) Position: Identification Production

Improved process stamping method in cutting time in half Prepared parts for final assembly to ensure product integrity Created station for process and electro’s Trimmed parts to meet aerospace specifications Trained new employees Serialized parts before installation Constructed new department from the ground up Experienced with Electro-Chemical Etch, Vibro Peen, Dot-Peen, and Rubber Stamping Worked in Engineering Lab testing and repairing cables for machines Received Improvement Award from the company Experienced with various inspection gauging for depth and I.D. verification.

Stanley Security Solutions, Indianapolis, IN Door Locks 03/2009 - 08/2011 (Full Time) Position: Production

Assembled various locks Increased personal efficiency level by 200-Combinate and stamp cores using a Dot-Peen. Introduced cost saving methods in shipping procedures Combined and stamped cores using a Dot-Peen Prepared keys Accelerated to number one in packing efficiency Responsible for ensuring all orders were completed to meet customer requirements

Roche Ind., Indianapolis, IN Pharmaceuticals 02/2007 - 12/2007 (Temp/Contract) Position: Assembly

Executed dispensing, labeling and packaging operations per approved procedures and area work instructions

Patricia Johnson – Continued

Roche Ind., Indianapolis, IN (continued)

Verified part numbers and performed on-line inspection of raw materials, sub-assemblies and finished kits to ensure product integrity

Prepared work centers per appropriate line clearance procedures and conduct regular cleaning for all production work areas

Monitored production routings and cycle-time efficiencies Issued materials, recorded labor hours and reviewed required documentation for production

work orders Updated and pre CN’d review production documentation (DMI’s, SOP’s, etc.) Reworked disposition products according to approved procedures

Product Action, Indianapolis, IN Automotive Part Testing 10/2005 - 08/2006 (Full Time) Position: Inspector

Inspected car parts, tools and other items in the Midwest region Trained new employees. Traveled to inspection locations Assisted team members in inspections Reported to main office Proficient in inspection gauging

Bartletts Inc., Indianapolis, IN Automotive Upholstery Manufacturer 02/2004 - 08/2005 (Temp/Contract) Position: Manufacturing / Production

Ran zone machine Assisted Designers

I.D.S., Phoenix, AZ P C Board Manufacturer 10/2003 – 01/2004 (Temp/Contract) Position: Assembler

Reworked P.C. circuit boards Tested P.C. circuit boards Worked on assembly lines

SAIC, San Diego, CA Military Parts 12/2001 - 08/2003 (Temp/Contract) Title: P C Assembler / Electro Assistant Engineer

Built assemblies from technical drawings and engineering sketches Built Bomb Detector Machines Built X-Ray Bomb Machines Built mechanical assemblies, soldered P.C. boards and wired harnesses and cables Utilized BGAY PACE TF2000 Re-Work System Assembled proto-types for Engineers Completed shop orders and facilitate quality inspections

Patricia Johnson – Continued QUADX Inc., San Diego, CA P C Board Manufacturer 04/2000 - 10/2001 (Temp to Permanent Employee) Position: Production Assembly

Performed thru-hole soldering Created Proto-type for filter assembly Stuffed and repaired P.C. circuit boards Reworked SMTs utilizing microscope

REMEC Inc., San Diego, CA P C Boards and Filters 01/1998 – 04/2000 (Full Time) Position: Assembler

Utilized hand tools to solder small surface mount components under the microscope Discovered and solved problems with filters Worked with hot plate, reflow solder machine, different types of epoxies when staking tuning

screws and other special soldering processes Prepared and assembled interconnects for Scientific Atlantic program Prepared tuning screws for Motorola filters Soldered interconnects for Motorola filters Set settings for reflow machine for baking filters before assembling filter

Worked closely with engineering department on folding and solder filters for digital microwave program

Maintained updated revisions of drawings on file Tested torque drivers Prepared and assembled electronic components from diagrams, blueprints and assembly

drawings

Education: (GED) General Educational Development