B U L L E T V A L V E�

T E C H N O L O G Y

P A T E N T E D

The threaded cartridge confi guration allows for a variety of mounting possibilities, such as direct integration into pneumatic actuators or vacuum generators without the need of external tubing or fasteners. 2-way & 3-way models of the BV cartridge are available. A surface manifold mount confi guration is also offered.

Valves That Don’t Stick

Bullet Valve (BV) Series

The patented Bullet Valve represents yet another evolution in air valve technology from MAC.

D-SEAL TECHNOLOGY

SHORT STROKE - High Shifting Forces (Energized)

High Shifting Forces (De-energized)

Balanced & Repeatable

Minimum Friction Wiping Action Isolates Solenoid From Contaminated Air

SHORT STROKE - High Shifting LONG LIFE LIFTING SOLENOID

High Shifting ForcesSTRONG RETURN SPRING

ONE PIECE POPPET/ARMATURE

Cushioning - Reduces Solenoid Wear

OVERSTROKE - Built In Wear Compensation

VERY FEW PARTSLONG LIFE LIFTING SOLENOIDONE PIECE POPPET / ARMATUREBALANCED DESIGNSOLENOID ISOLATED FROM CONTAMINATED AIRUNIQUE MOUNTING

�

�

SM

The threaded cartridge confi guration allows for a variety of mounting possibilities, such as direct integration into pneumatic actuators or vacuum generators without the need of external tubing or fasteners. 2-way & 3-way models of the BV cartridge are available. A surface manifold mount confi guration is also offered.

Valves That Don’t Stick

Bullet Valve (BV) Series

The patented Bullet Valve represents yet another evolution in air valve technology from MAC.

D-SEAL TECHNOLOGY

SHORT STROKE - High Shifting Forces (Energized)

High Shifting Forces (De-energized)

Balanced & Repeatable

Minimum Friction Wiping Action Isolates Solenoid From Contaminated Air

SHORT STROKE - High Shifting LONG LIFE LIFTING SOLENOID

High Shifting ForcesSTRONG RETURN SPRING

ONE PIECE POPPET/ARMATURE

Cushioning - Reduces Solenoid Wear

OVERSTROKE - Built In Wear Compensation

VERY FEW PARTSLONG LIFE LIFTING SOLENOIDONE PIECE POPPET / ARMATUREBALANCED DESIGNSOLENOID ISOLATED FROM CONTAMINATED AIRUNIQUE MOUNTING

�

�

SM

BV Series

B u l l e t V a l v e �

3

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fluctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE Type 2 Way

Cartridge (Axial Flow) BV209A-CG0-00-xxxx-xxx

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

JST Connector Flying LeadsTA No ground wire BATC Blocking & suppr. BC diode & LED (no ground)TE Blocking & suppr. BE diode (no ground)TG LED (no ground) BGTJ MOV (no ground) BJTL LED & MOV BL (no ground)

B Round GC 24 V=/ 2.5WGE 24 V=/ 4.0WGH 12 V=/ 2.5WGK 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

*High wattage - high speed options - consult factory High wattage confi gurations require intermittent duty cycles.** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty ERC wattage reduction options - consult factory

CIRCUIT BAR

xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.

2/2 BV209AUp to 70 Nl/min Cartridge

�

�

† † Not available for fl ying leads cover

† †

Cartridge (Standard) BV209A-CA1-00-xxxx-xxx

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

Bullet valve type Cyl. port size Spacing (mm) Side cylinder port Bottom cylinder port

Standard

#10-32 UNF 11 CCMV09A-00AAA-xx CCMV09A-00BAA-xx

M5 11 CCMV09A-00AAB-xx CCMV09A-00BAB-xx

M7 11 CCMV09A-00AAC-xx CCMV09A-00BAC-xx

Axial fl ow#10-32 UNF 11 - CCMV09A-00BDA-xx

M5 11 - CCMV09A-00BDB-xxM7 11 - CCMV09A-00BDC-xx

MC 24 V=/ 2.5WME 24 V=/ 4.0WMH 12 V=/ 2.5WMK 12 V=/ 4.0W

† Not available w/axial fl ow

†

†

†

†

BV Series

B u l l e t V a l v e �

4

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 70 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6961 • Insertion/removal socket: AT-1180 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV209A (2-way) - Standard Watt

CCMV09A - Side ports

������������

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

4

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 70 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6961 • Insertion/removal socket: AT-1180 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV209A (2-way) - Standard Watt

CCMV09A - Side ports

������������

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

5

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

Type 3 Way N.C. 3 Way Universal

Cartridge BV309A-CC1-00-xxxx-xxx

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

JST Connector Flying LeadsTA No ground wire BATC Blocking & suppr. BC diode & LED (no ground)TE Blocking & suppr. BE diode (no ground)TG LED (no ground) BGTJ MOV (no ground) BJTL LED & MOV BL (no ground)

B Round GA 24V =/ 1.0WGB 24V =/ 1.8WGC 24V =/ 2.5WGD 24V =/ 3.0WGE 24V =/ 4.0WGF 12V =/ 1.0WGG 12V =/ 1.8WGH 12V =/ 2.5WGJ 12V =/ 3.0WGK 12V =/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

* High wattage - high speed options - consult factory** ERC wattage reduction options - consult factory

CIRCUIT BAR

Port size Spacing (mm) Side cylinder port

# 10-32 UNF M5 M7

111111

CCMV09A-00ABA-xxCCMV09A-00ABB-xxCCMV09A-00ABC-xx

xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.* High wattage confi gurations require intermittent duty cycles.** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty.

3/2 NC, Universal BV309AUp to 60 Nl/min Cartridge

BV309A-CD1-00-xxxx-xxx3 1

2

3 1

2

3 1

2

3 1

2

† Not available for fl ying leads cover

†

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

BV Series

B u l l e t V a l v e �

6

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 60 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6962 • Insertion/removal socket: AT-1180 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV309A (3-way) - Standard Watt

CCMV09A - Side ports

BULLET VALVE WITH "JST" COVERAND CIRCUIT BOARD FOR LED., MOV., & DIODE OPTIONS

BV309A (3-WAY) - STANDARD WATT

49.5 10.5 DIA.

BULLET VALVE WITH "JST" COVERAND CIRCUIT BOARD FOR LED., MOV., & DIODE OPTIONS

BV309A (3-WAY) - STANDARD WATT

49.5 10.5 DIA.

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

6

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 60 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6962 • Insertion/removal socket: AT-1180 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV309A (3-way) - Standard Watt

CCMV09A - Side ports

BULLET VALVE WITH "JST" COVERAND CIRCUIT BOARD FOR LED., MOV., & DIODE OPTIONS

BV309A (3-WAY) - STANDARD WATT

49.5 10.5 DIA.

BULLET VALVE WITH "JST" COVERAND CIRCUIT BOARD FOR LED., MOV., & DIODE OPTIONS

BV309A (3-WAY) - STANDARD WATT

49.5 10.5 DIA.

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

7

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE Type 2 Way

Cartridge (Standard) BV210A-CA1-00-xxxx-xxx

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode b & LED (no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board

B Round EH 24 V=/ 2.5WEG 24 V=/ 4.0WEK 12 V=/ 2.5WEJ 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

High wattage - high speed options - consult factory High wattage confi gurations require intermittent duty cycles.** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty ERC wattage reduction options - consult factoryCIRCUIT BAR

xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.

2/2 BV210AUp to 80 Nl/min Cartridge

�

�

Cartridge (Axial Flow) BV210A-CB0-00-xxxx-xxx

†

†

*

Not available for fl ying leads cover Only option for Pico cover

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

Bullet valve type Cyl. port size Spacing (mm) Side cylinder port Bottom cylinder port

Standard

#10-32 UNF 12 CCMV10A-00AAA-xx CCMV10A-00BAA-xx

M5 12 CCMV10A-00AAB-xx CCMV10A-00BAB-xx

M7 12 CCMV10A-00AAC-xx CCMV10A-00BAC-xx

Axial fl ow#10-32 UNF 12 - CCMV10A-00BDA-xx

M5 12 - CCMV10A-00BDB-xxM7 12 - CCMV10A-00BDC-xx

Note: Pico covers PC-PL have a 3rd Pin whichis a location pin

BV Series

B u l l e t V a l v e �

8

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 80 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6960 • Insertion/removal socket: AT-1181 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV210A (2-way) - Standard Watt

T e c h n i c a l D a t a

D i m e n s i o n s

11.70

76.0067.50

4.25

4.25

36.00

STATION # 1TYP. (2)

TYP.

STATION SPACING

CCMV10A - SIDE PORTS

"T" INDICATES B.S.P.TR.

OR1/8"-27 N.P.T.F.

7.90

10.50

1/8"-28 B.S.P.TR

"P" INDICATES B.S.P.PL.

28.10

20.00

1/8"-28 B.S.P.PLOR

8.33 DIA. DRILL - 10.0 DEEP120º C'SINK TO 10.5 DIA.1/8"-27 N.P.T.F. TAP TO GAGE TYP. (2)(1) EACH END

28.00

12.00

14.00

18.90

63.55

CYL.

55.95

BV Series

B u l l e t V a l v e �

8

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 80 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6960 • Insertion/removal socket: AT-1181 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV210A (2-way) - Standard Watt

T e c h n i c a l D a t a

D i m e n s i o n s

11.70

76.0067.50

4.25

4.25

36.00

STATION # 1TYP. (2)

TYP.

STATION SPACING

CCMV10A - SIDE PORTS

"T" INDICATES B.S.P.TR.

OR1/8"-27 N.P.T.F.

7.90

10.50

1/8"-28 B.S.P.TR

"P" INDICATES B.S.P.PL.

28.10

20.00

1/8"-28 B.S.P.PLOR

8.33 DIA. DRILL - 10.0 DEEP120º C'SINK TO 10.5 DIA.1/8"-27 N.P.T.F. TAP TO GAGE TYP. (2)(1) EACH END

28.00

12.00

14.00

18.90

63.55

CYL.

55.95

BV Series

B u l l e t V a l v e �

9

Function Flow [max] Manifold mounting Series

O P E R A T I O N A L B E N E F I T S

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

Type 3 Way N.C. 3 Way Universal

Cartridge (Standard) BV310A-CC1-00-xxxx-xxx

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round HA 24 V=/ 1.0W HF 12 V=/ 1.0WHB 24 V=/ 1.8W HG 12 V=/ 1.8WHC 24 V=/ 2.5W HH 12 V=/ 2.5WHD 24 V=/ 3.0W HJ 12 V=/ 3.0WHE 24 V=/ 4.0W HK 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

* High wattage - high speed options - consult factory** ERC wattage reduction options - consult factory

CIRCUIT BARPort size Spacing (mm) Side cylinder port

# 10-32 UNF M5 M7

121212

CCMV10A-00ABA-xxCCMV10A-00ABB-xxCCMV10A-00ABC-xx

xx = Number of stations Note: for valves mounted to bar at factory, add -9 to model numbers.* High wattage confi gurations require intermittent duty cycles.** ERC - Energy Reduction Circuitry - Reduces the effective wattage at continuous duty.

3/2 NC, Universal BV310AUp to 90 Nl/min Cartridge

BV310A-CD1-00-xxxx-xxx

3 1

2

3 1

2

3 1

2

3 1

2

†

H o w T o O r d e r

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED(no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board

Not available for fl ying leads cover Only option for Pico cover

Note: Pico covers PC-PL have a 3rd Pin which is a location pin

†

BV Series

B u l l e t V a l v e �

10

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 90 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6963 • Insertion/removal socket: AT-1181 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV310A (3-way) - Standard Watt

T e c h n i c a l D a t a

D i m e n s i o n s

11.70

12.00

14.00

28.0013.10

63.55

CYL.

1/8"-27 N.P.T.F.

"T" INDICATES B.S.P.TR.

28.10

20.00

10.50

"P" INDICATES B.S.P.PL.

OR

7.90

1/8"-28 B.S.P.PLOR1/8"-28 B.S.P.TR

8.33 DIA. DRILL - 10.0 DEEP120º C'SINK TO 10.5 DIA.1/8"-27 N.P.T.F. TAP TO GAGE TYP. (4)(2) EACH END

60.40

36.00

4.25 67.50

4.25

76.00

STATION # 1

TYP.

TYP. (2)

STATION SPACING

CCMV10A - SIDE PORTS

BV Series

B u l l e t V a l v e �

10

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 90 Nl/min -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-6963 • Insertion/removal socket: AT-1181 (Bit) AT-1185 (Bit Holder) AT-1184 (Handle)

Bullet Valve with ‘‘JST’’ Cover and Circuit Board for LED., MOV., & Diode OptionsBV310A (3-way) - Standard Watt

T e c h n i c a l D a t a

D i m e n s i o n s

11.70

12.00

14.00

28.0013.10

63.55

CYL.

1/8"-27 N.P.T.F.

"T" INDICATES B.S.P.TR.

28.10

20.00

10.50

"P" INDICATES B.S.P.PL.

OR

7.90

1/8"-28 B.S.P.PLOR1/8"-28 B.S.P.TR

8.33 DIA. DRILL - 10.0 DEEP120º C'SINK TO 10.5 DIA.1/8"-27 N.P.T.F. TAP TO GAGE TYP. (4)(2) EACH END

60.40

36.00

4.25 67.50

4.25

76.00

STATION # 1

TYP.

TYP. (2)

STATION SPACING

CCMV10A - SIDE PORTS

BV Series

B u l l e t V a l v e �

11

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life

VALVE

Type 3 Way N.C. 3 Way Universal

Manifold Mount - Non plug-in BV310A-LC1-00-xxxx-xxx

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round HA 24 V=/ 1.0WHB 24 V=/ 1.8WHC 24 V=/ 2.5WHD 24 V=/ 3.0WHE 24 V=/ 4.0WHF 12 V=/ 1.0WHG 12 V=/ 1.8WHH 12 V=/ 2.5WHJ 12 V=/ 3.0WHK 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

B Cover For Manifold Body

* High wattage - high speed options - consult factory** ERC wattage reduction options - consult factory

NON PLUG-IN CIRCUIT BARPort size Spacing (mm) Side cylinder port Bottom cylinder port

# 10-32 UNF M5 M7

121212

CBMV10A-00BBA-xxCBMV10A-00BBB-xxCBMV10A-00BBC-xx

xx = Number of stationsNote: for valves mounted to bar at factory, add -9 to model numbers.

3/2 NC, Universal BV310AUp to 80 Nl/min Manifold mount - Non plug-in

BV310A-LD1-00-xxxx-xxx3 1

2

3 1

2

3 1

2

3 1

2

CBMV10A-00ABA-xxCBMV10A-00ABB-xxCBMV10A-00ABC-xx

BV310A- LC 1 -00-xxxx-xxx

Replace with ‘‘0’’ for no manual operator

How to order bar confi gured for regulatorCBMV10A-00 A BB- xx Replace with D for regulator - Side ports Replace with E for regulator - Bottom ports Note: Regulator must be ordered separately - see next page* High wattage confi gurations require intermittent duty cycles

**ERC - Energy Reduction Circuitry - Reduces the effectiveness wattage at continuous duty

†

†

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

O p t i o n s

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED(no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board

Not available for fl ying leads cover Only option for Pico cover

Note: Pico covers PC-PL have a 3rd Pin which is a location pin

BV Series

B u l l e t V a l v e �

12

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 80 Nl/min -15% to +10% of nominal voltage

Spare parts: • Pressure seal, body to base: 16985 • Mounting screw, body to base: 35166 - 2 pcs required • Regulator for bar: PR44A-A0AX X = A 0 to 7 Bar B 0 to 4 Bar C 0 to 3 Bar D 0 to 1 Bar

BV310A Bar Manifold Assembly

CBMV10A Circuit bar for BV310Without regulator With regulator

����

����

����

71.4

80.0

4.25 diathru

• Blank Station Cover Plate: N-BV008

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

12

Fluid:Pressure range:Lubrication:Filtration:Temperature range:Flow (at 6 bar ΔP=1bar):Voltage range:

Compressed air, vacuum, inert gases Vacuum to 8 Bar Not required, if used select a medium aniline point lubricant (between 80°C and 100°C) 40µ -18°C to +50°C / 0°F to 120°F Up to 80 Nl/min -15% to +10% of nominal voltage

Spare parts: • Pressure seal, body to base: 16985 • Mounting screw, body to base: 35166 - 2 pcs required • Regulator for bar: PR44A-A0AX X = A 0 to 7 Bar B 0 to 4 Bar C 0 to 3 Bar D 0 to 1 Bar

BV310A Bar Manifold Assembly

CBMV10A Circuit bar for BV310Without regulator With regulator

����

����

����

71.4

80.0

4.25 diathru

• Blank Station Cover Plate: N-BV008

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

13

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round CA 24 V=/ 1.0WCB 24 V=/ 1.8WCC 24 V=/ 2.5WCD 24 V=/ 3.0WCE 24 V=/ 4.0WCF 12 V=/ 1.0WCG 12 V=/ 1.8WCH 12 V=/ 2.5WCJ 12 V=/ 3.0WCK 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

xx = Number of stationsNote: for valves mounted to bar at factory, add -9 to model numbers.

2/2 BV214AUp to 240 Nl/min Cartridge

Type 2-Way (standard) 2-Way (axial fl ow)

Cartridge BV214A-CA1-00-xxxx-xxx BV214A-CB0-00-xxxx-xxx

Bullet valve type Cyl. port size Spacing (mm) Side cylinder port Bottom cylinder port

Standard

M7 17 CCMV14A-00AAA-xx CCMV14A-00BAA-xx

0.32 cm 17 CCMV14A-00AAB-xx CCMV14A-00BAB-xx

5/32 tube recpt. 17 CCMV14A-00AAC-xx CCMV14A-00BAC-xx

Axial fl owM7 17 - CCMV14A-00BDA-xx

0.32 cm 17 - CCMV14A-00BDB-xx

�

�

�

�

CIRCUIT BAR

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

*

†

Note: Common inlet & exhaust are 0.64 cm NPTF For BSPPL or BSPTR threads consult factory

Requires special spacing - - consult factory†

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED (no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board GA MAC JAC Connector Note: Pico covers PC-PL have a 3rd Pin whichis a location pin

*Not available for fl ying leads cover Only option for Pico cover

BV Series

B u l l e t V a l v e �

14

5.5

92.0

25.4

50.8

81.0

6.4 THRUTYP. (2)

38.0

73.3

SPACING

17.0TYP. VALVE20.5

CCMV14A bar with BV214A valves

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow (at 6 bar, ∆ P=1bar): Up to 240 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

Flying leads JST Connector MAC Jac

69.4 66.669.7ø 16.5 ø 16.5 ø 21.5

0.64 cm NPTFTYP (2)(1) Each side

Tools: Manifold cavity step reamer: T-7331 • Insertion/removal socket: AT-1263 (Bit) AT-1185 (Bit Holder) AT-1264 (Handle)

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

14

5.5

92.0

25.4

50.8

81.0

6.4 THRUTYP. (2)

38.0

73.3

SPACING

17.0TYP. VALVE20.5

CCMV14A bar with BV214A valves

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow (at 6 bar, ∆ P=1bar): Up to 240 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

Flying leads JST Connector MAC Jac

69.4 66.669.7ø 16.5 ø 16.5 ø 21.5

0.64 cm NPTFTYP (2)(1) Each side

Tools: Manifold cavity step reamer: T-7331 • Insertion/removal socket: AT-1263 (Bit) AT-1185 (Bit Holder) AT-1264 (Handle)

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

15

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round CA 24 V=/ 1.0WCB 24 V=/ 1.8WCC 24 V=/ 2.5WCD 24 V=/ 3.0WCE 24 V=/ 4.0WCF 12 V=/ 1.0WCG 12 V=/ 1.8WCH 12 V=/ 2.5WCJ 12 V=/ 3.0WCK 12 V=/ 4.0W

0* No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

xx = Number of stationsNote: for valves mounted to bar at factory, add -9 to model numbers.

3/2 BV314AUp to 240 Nl/min Cartridge

Type 3-Way N.C. 3-Way universal valve

Cartridge BV314A-CC1-00-xxxx-xxx BV314A-CD1-00-xxxx-xxx

Cyl. port size Spacing (mm) Side cylinder port Bottom cylinder port

M7 17 CCMV14A-00ABA-xx CCMV14A-00BBA-xx

0.32 cm 17 CCMV14A-00ABB-xx CCMV14A-00BBB-xx

5/32 tube receptacle 17 CCMV14A-00ABC-xx CCMV14A-00BBC-xx

3 1

2

3 1

2

3 1

2

3 1

2

Note: Common inlet & exhaust are 0.64 cm NPTF For BSPPL or BSPTR threads consult factory

CIRCUIT BAR

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

† Requires special spacing - - consult factory

†

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED(no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board GA MAC JAC Connector Note: Pico covers PC-PL have a 3rd Pin whichis a location pin

*Not available for fl ying leads cover Only option for Pico cover

BV Series

B u l l e t V a l v e �

16

44.0

SPACING

79.3

17.0TYP. VALVE20.5

0.185.5

92.0

TYP. (2)

25.4

6.4 THRU

50.8

CCMV14A bar with BV314A valves

Flying leads JST Connector MAC Jac

76.2 75.3 76.5

16.521.5

16.5

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow (at 6 bar, ∆ P=1bar): Up to 240 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

0.64 cm NPTFTYP (4)(2) Each side

Tools: Manifold cavity step reamer: T-7321 • Insertion/removal socket: AT-1263 (Bit) AT-1185 (Bit Holder) AT-1264 (Handle)

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

16

44.0

SPACING

79.3

17.0TYP. VALVE20.5

0.185.5

92.0

TYP. (2)

25.4

6.4 THRU

50.8

CCMV14A bar with BV314A valves

Flying leads JST Connector MAC Jac

76.2 75.3 76.5

16.521.5

16.5

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow (at 6 bar, ∆ P=1bar): Up to 240 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

0.64 cm NPTFTYP (4)(2) Each side

Tools: Manifold cavity step reamer: T-7321 • Insertion/removal socket: AT-1263 (Bit) AT-1185 (Bit Holder) AT-1264 (Handle)

T e c h n i c a l D a t a

D i m e n s i o n s

BV Series

B u l l e t V a l v e �

17

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round CA 24 V=/ 1.0WCB 24 V=/ 1.8WCC 24 V=/ 2.5WCD 24 V=/ 3.0WCE 24 V=/ 4.0WCF 12 V=/ 1.0WCG 12 V=/ 1.8WCH 12 V=/ 2.5WCJ 12 V=/ 3.0WCK 12 V=/ 4.0W

0 No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

2/2 BV221AUp to 600 Nl/min Cartridge

Type 2-Way (standard) 2-Way (axial fl ow)

Cartridge BV221A-CA1-00-xxxx-xxx BV221A-CB0-00-xxxx-xxx�

�

�

�

Note:For CIRCUIT BAR ordering information please consult factory

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

* JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED (no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board GA MAC JAC Connector

Note: Pico covers PC-PL have a 3rd Pin whichis a location pin

*Not available for fl ying leads cover Only option for Pico and M12 cover

M12

RC

RE

RGRJRL

RN

BV Series

B u l l e t V a l v e �

18

Flying leads JST Connector M12

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow: Up to 600 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

T e c h n i c a l D a t a

D i m e n s i o n s

99.0 23.5 DIA. 99.7 23.5 DIA.

107.7 23.5 DIA.

99.0 23.5 DIA.99.7 23.5 DIA. 107.7 23.5 DIA.

BV221A valves

Tools: Manifold cavity step reamer: T-7571 • Insertion/removal socket: AT-1365 (Bit)

BV Series

B u l l e t V a l v e �

18

Flying leads JST Connector M12

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow: Up to 600 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

T e c h n i c a l D a t a

D i m e n s i o n s

99.0 23.5 DIA. 99.7 23.5 DIA.

107.7 23.5 DIA.

99.0 23.5 DIA.99.7 23.5 DIA. 107.7 23.5 DIA.

BV221A valves

Tools: Manifold cavity step reamer: T-7571 • Insertion/removal socket: AT-1365 (Bit)

BV Series

B u l l e t V a l v e �

19

Function Flow [max] Manifold mounting Series

1. Short stroke with high shifting forces2. Balanced poppet, immune to pressure fl uctuations3. Precise repeatability4. Solenoid isolated from contaminated air5. Very few parts6. Extremely long life7. Unique mounting - no fasteners or screws required

VALVE

SOLENOID OPERATOR X XX X - X XX

Solenoid coverSolenoid can (round)Solenoid Voltage Lead wire length

B Round CA 24 V=/ 1.0WCB 24 V=/ 1.8WCC 24 V=/ 2.5WCD 24 V=/ 3.0WCE 24 V=/ 4.0WCF 12 V=/ 1.0WCG 12 V=/ 1.8WCH 12 V=/ 2.5WCJ 12 V=/ 3.0WCK 12 V=/ 4.0W

0* No lead wireA 45 cmB 60 cmC 90 cmD 120 cmE 180 cmF 245 cmH 365 cm

C For Top Cover Option and Can w/ Outer Threads

xx = Number of stationsNote: for valves mounted to bar at factory, add -9 to model numbers.

3/2 BV321AUp to 600 Nl/min Cartridge

Type 3-Way N.C. 3-Way universal valve

Cartridge BV321A-CC1-00-xxxx-xxx BV321A-CD1-00-xxxx-xxx

Cyl. port size Spacing (mm) Side cylinder port Bottom cylinder port

0.32 cm 25 CCMV21A-00ABA-xx CCMV21A-00BBA-xx

0.64 cm 25 CCMV21A-00ABB-xx CCMV21A-00BBB-xx

3 1

2

3 1

2

3 1

2

3 1

2

Note: Common inlet & exhaust are 0.95 cm NPTF For BSPPL or BSPTR threads consult factory

CIRCUIT BAR

O P E R A T I O N A L B E N E F I T S

H o w T o O r d e r

JST Pico Flying LeadsTA BA No ground wire TC PC BC Blocking & suppr. diode & LED(no ground)TE PE BE Blocking & suppr. diode (no ground)TG PG BG LED (no ground) TJ PJ BJ MOV (no ground)TL PL BL LED & MOV (no ground) PN Transfer Board GA MAC JAC Connector

Note: Pico covers PC-PL have a 3rd Pin whichis a location pin

*Not available for fl ying leads cover Only option for Pico and M12 cover

M12

RC

RE

RGRJRL

RN

BV Series

B u l l e t V a l v e �

20

CCMV21A bar with BV321A valves

Flying leads JST Connector M12

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow: Up to 600 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-7573 • Insertion/removal socket: AT-1365 (Bit)

T e c h n i c a l D a t a

D i m e n s i o n s

24.50 25.00

124.00

58.50

30.35

SIDE PORT

1/8" SIDE CYLINDERPORTS

TYP.

REF.

TYP. CYLINDERPORTS

44.00

56.00

113.1 18.50

42.50 58.50

TYP.(2)

3/8" EXHAUST COMMONTYP. BOTH ENDS

3/8" INLET COMMONTYP. BOTH ENDS

APPROX.

25.00 24.50

27.00 27.00

112.00 6.00 6.40 DIA.(M6 MTG. HOLE)

TYP.(2)

MTG. HOLESTYP.(2)

TYP. BV321AVALVES

TYP.

SIDE PORT

105.0 23.5 DIA. 105.5 23.5 DIA. 113.7 23.5 DIA. 105.0 23.5 DIA. 105.0 23.5 DIA. 113.7 23.5 DIA.

BV Series

B u l l e t V a l v e �

20

CCMV21A bar with BV321A valves

Flying leads JST Connector M12

Fluid: Compressed air, vacuum, inert gasesPressure range: Vacuum to 8 BarLubrication: Not required, if used select a medium aniline point lubricant (between 80°C and 100°C)Filtration: 40µTemperature range: -18°C to +50°C / 0°F to 120°F

Flow: Up to 600 Nl/min (4.0 W)Voltage range: -15% to +10% of nominal voltage

Tools: Manifold cavity step reamer: T-7573 • Insertion/removal socket: AT-1365 (Bit)

T e c h n i c a l D a t a

D i m e n s i o n s

24.50 25.00

124.00

58.50

30.35

SIDE PORT

1/8" SIDE CYLINDERPORTS

TYP.

REF.

TYP. CYLINDERPORTS

44.00

56.00

113.1 18.50

42.50 58.50

TYP.(2)

3/8" EXHAUST COMMONTYP. BOTH ENDS

3/8" INLET COMMONTYP. BOTH ENDS

APPROX.

25.00 24.50

27.00 27.00

112.00 6.00 6.40 DIA.(M6 MTG. HOLE)

TYP.(2)

MTG. HOLESTYP.(2)

TYP. BV321AVALVES

TYP.

SIDE PORT

105.0 23.5 DIA. 105.5 23.5 DIA. 113.7 23.5 DIA. 105.0 23.5 DIA. 105.0 23.5 DIA. 113.7 23.5 DIA.

21

50.30 Ø 11.70

54.30 Ø 11.70

1 (POS)

3 (NEG)

4 (LOCATING PIN)

Connector Options

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

JST Connector (TA)

JST Connector w/ LED (TG, TL)

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

BV210

54.80 Ø11.70

55.95 Ø11.50

43.60 Ø11.70

56.15 Ø11.70Ø 11.70

Ø 11.70

Ø 11.70

Ø 11.70

56.15

43.60

55.95

54.80

22

54.75 Ø 11.70

58.75 Ø 11.70

1 (POS) 4 (LOCATING PIN)

3 (NEG)

Connector Options

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

JST Connector (TA)

JST Connector w/ LED (TG, TL)

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

BV310

58.55 Ø11.70

60.40 Ø11.70

58.06 Ø11.70

60.60 Ø11.7060.60 Ø 11.70

Ø 11.70

Ø 11.70

Ø 11.70

58.06

60.40

58.55

22

54.75 Ø 11.70

58.75 Ø 11.70

1 (POS) 4 (LOCATING PIN)

3 (NEG)

Connector Options

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

JST Connector (TA)

JST Connector w/ LED (TG, TL)

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

BV310

58.55 Ø11.70

60.40 Ø11.70

58.06 Ø11.70

60.60 Ø11.7060.60 Ø 11.70

Ø 11.70

Ø 11.70

Ø 11.70

58.06

60.40

58.55

23

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

JST Connector (TA)

JST Connector w/ LED (TC, TG, TL)

MAC Jac (GA)

Connector Options

74.30 Ø 16.50

78.30 Ø 16.50

1 (POS)

3 (NEG)

4 (LOCATING PIN)

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

BV214

Ø 16.5

Ø 16.5

Ø 16.5

Ø 16.5

Ø 21.569.7

72.1

66.6

72.1

69.4

24

2 Pin PICO

3 Pin PICO

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

JST Connector (TA)

JST Connector w/ LED (TC, TG, TL)

MAC Jac (GA)

81.10 Ø 16.50

85.10 Ø 16.50

1 (POS)

3 (NEG)

4 (LOCATING PIN)

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

BV314

Connector Options

Ø 21.5

Ø 16.5

Ø 16.5

Ø 16.5

Ø 16.5

76.5

79.0

75.3

79.0

76.2

24

2 Pin PICO

3 Pin PICO

Flying Leads (BA)

Flying Leads w/ LED (BC, BG, BL)

JST Connector (TA)

JST Connector w/ LED (TC, TG, TL)

MAC Jac (GA)

81.10 Ø 16.50

85.10 Ø 16.50

1 (POS)

3 (NEG)

4 (LOCATING PIN)

2 Pin PICO (PN)

3 Pin PICO (PC, PE, PG, PJ, PL)

BV314

Connector Options

Ø 21.5

Ø 16.5

Ø 16.5

Ø 16.5

Ø 16.5

76.5

79.0

75.3

79.0

76.2

BV Series

B u l l e t V a l v e �

25

Our manufacturing process of the Bullet Valve cartridge body enables fl exibility with regards to offering potential modifi cations that meet your specifi c application needs. An example of such modifi cations is the “axial fl ow” cartridge body we are currently offering for the BV209, BV210 and BV214 series.

The “axial fl ow” cartridge enables the valve to fl ow air between the bottom of the valve body and manifold it is housed in – see fi gure below. This modifi cation allows for a linear fl ow path out of the manifold producing measurably higher outlet pulse height (force) in blow off type of applications. We have currently used this modifi cation for applications in the sorting industry with excellent results.

If you have an application that would benefi t from utilizing the axial fl ow cartridge option or wish to discuss other potential cartridge modifi cations, please consult your local MAC distributor (MDN Associate). By understanding your application and valve requirements we can optimize the valve settings accordingly.

�

C a r t r i d g e M o d i f i c a t i o n s

BV Series

B u l l e t V a l v e �

26

BV Series

N O T E S

BV Series

B u l l e t V a l v e �

26

BV Series

N O T E S

www.macvalves.com

PRECAUTIONS AND WARNINGS CONCERNING THE APPLICATION, INSTALLATION AND SERVICE OF MAC VALVES AND OTHER MAC VALVES PRODUCTS

The warnings and precautions below are important to be read and understood beforedesigning into a system any MAC Valves products, and before installing or servicing any MAC Valves product. Improper use, installation or servicing of any MAC Valves product in some systems could create a hazard to personnel or equipment. No distinction in importance should be made between the terms warnings and precautions.

WARNING : .Under no circumstances are MAC Valves products to be used in any application or in any manner where failure of the MAC Valves product to operate as intended could in any way jeopardize the safety of the operator or any other person or property. • Do not operate outside of pressure range listed on a valve label or outside of the designated

temperature range.• Air supply must be clean and dry. Moisture or contamination can affect proper operation of the

valve.• Before attempting to repair, adjust or clean a MAC Valves product, consult catalog, parts & operation

sheet, or factory for proper maintenance procedures, lubrication and cleaning agents. Never attempt to repair or perform other maintenance with air pressure to the valve.

• If air line lubrication is used do not use any lubrication other than those recommended in the catalog, parts & operation sheet or by the factory.

APPLICATION PRECAUTIONS : .INDUSTRIAL USE -• MAC Valve products are intended for general use in industrial pneumatic and/or vacuum systems.

They are general purpose industrial products with literally thousands of different applications in industrial systems. These products are not inherently dangerous, but they are only a component of an overall system. The system in which they are used must provide adequate safeguards to prevent injury or damage in the event failure occurs, whether it be failure of switches, regulators, cylinders, valves or any other component.

POWER PRESSES -MAC Valve products are not designed nor intended to be used to operate and/or control the operation of clutch and/or brake systems on power presses. There are special products on the market for such use.

2-POSITION VALVES -Some MAC valves are 2-position, 4-way valves. When air is supplied to the inlet port(s) of these valves, there will always be a flow path from the inlet to one of the outlets regardless of which of the two positions the valve is situated. Therefore, if pressurized air retained in the system would present a hazard in the application or servicing of the valve or system, a separate method in the system must be provided to remove the trapped air.

3- POSITION VALVES-Some MAC valves are 3-position, 4-way valves. These valves are either double solenoid or double remote air operated.If either of the two operators is in control, air supplied to the inlet port(s) will pass through the valve to one of the outlets as on 2-position, 4-way valves. However, if neither operator is in control, the valve moves to a center position. Listed below are the various center position functions :

A. CLOSED CENTER- With this type valve, when in the center position all ports are blocked (inlets and exhausts) meaning the air at both outlet ports is trapped. If trapping the air in both outlet ports would present a hazard in the application or servicing, a separate method in the system must be provided to remove the trapped air or this type valve should not be used.

B. OPEN CENTER- With this type valve, when in the center position, the inlet port(s) is blocked and the two outlet ports are open to the exhaust port(s) of the valve. If having no air in either outlet port would present a hazard in the application or servicing, this type valve should not be used.

C. PRESSURE CENTER- With this type valve, when in the center position, the inlet port(s) is connected to both outlet ports of the valve. If having pressurized air to either or both outlet ports would present a hazard in the application or servicing of the valve or system, a separate method in the system must be provided to remove the retained air or this type valve should not be used.

OPERATING SPECIFICATIONS -MAC Valves products are to be installed only on applications that meet all operating specifications described in the MAC catalog for the MAC Valves product.

MANUAL OPERATORS-Most MAC valves can be ordered with manual operators. Manual operators when depressed, are designed to shift the valve to the same position as would the corresponding solenoid or remote air pilot operator if it were activated. Care must be taken to order a type, if any, that will be safe for the physical location of the manual operator in the system. If intentional or accidental operation of a valve by a manual operator could cause personal injury or property damage, a manual operator should not be used.

REMOTE AIR OPERATED VALVESPilot valves supplying signal pressure to remote air operated valves should be 3-way valves with adequate supply and exhaust capacity to provide positive pressurizing and exhausting of the pilot supply line. Pilot lines should be open to exhaust when valves are deenergized.

INSTALLATION PRECAUTIONS : .A. Do not install any MAC Valves product without first turning off air (bleed system completely) and

electricity to the machine.B. MAC Valves products should only be installed by qualified, knowledgeable personnel who

understand how the specific valve is to be pneumatically piped and electrically connected (where applicable). Flow paths through the valve are shown in the catalog and on the valve by use of ANSI or ISO type standard graphic symbols. Do not install unless these symbols and the valve functions and operations are thoroughly understood.

C. If air line lubrication is used do not use any lubrication other than those recommended in the catalog, parts & operation sheet or by the factory.

SERVICE PRECAUTIONS :A. Do not service or remove from service any MAC Valves product without first shutting off both the

air and electricity to the valve and making certain no pressurized air which could present a hazard is retained in the system.

B. MAC Valves products should only be serviced or removed from service by qualified, knowledgeable personnel who understand how the specific product is used and/or how the specific valve is piped and used and whether there is air retained in the connecting lines to the valve or electric power still connected to the valve.

C. Before attempting to repair, adjust or clean a MAC Valves product, consult catalog, parts & operation sheet, or factory for proper maintenance procedures, lubrication and cleaning agents. Never attempt to repair or perform other maintenance with air pressure to the valve.

D. MAC Valves products are never to be stepped on while working on a machine. Damage to a MAC valve, or other product or lines to the product (either air or electrical lines) or accidental activation of a manual operator on the valve could result in personal injury or property damage.

LIMITATION OF GUARANTEE .This Guarantee is limited to the replacement or rebuilding of any valve or other product which should fail to operate properly. Valves or other products, under the MAC Guarantee, must be returned (with or without bases) transportation prepaid and received at our factory within the Guarantee period. They will be returned to the customer at the expense of MAC Valves, Inc., and will carry the same guarantee as provided under the Flat Rate Rebuild Program.

DISCLAIMER OF GUARANTEE .No claims for labor, material, time, damage, or transportation are allowable nor will any valve or other product be replaced or rebuilt under this guarantee which has been damaged by the purchaser not in the normal course of its use and maintenance during the warranty period. The guarantee does not apply to loss or damage caused by fire, theft, riot, explosion, labor dispute, act of God, or other causes beyond the control of MAC Valves,Inc. MAC Valves, Inc. shall in no event be liable for remote, special or consequential damages under the MAC Guarantee, nor under any implied warranties, including the implied warranty of merchantability.

The above Guarantee is our manner of extending the engineering and service resources of the MAC Valves, Inc. organization to assure our customer long, and continued satisfaction.

MAC VALVES, INC.P.O. BOX 11130569 BECK ROADWIXOM, MI 48393-7011

TEL: 1-800-MAC VLVSTEL: 1 (248) 624-7700FAX: 1 (248) 624-0549www.macvalves.commac@macvalves.com

MAC VALVES EUROPE, INC.RUE MARIE CURIE, 12B- 4431 ANS (LIEGE)BELGIUM

TEL: 32 (4) 239 68 68FAX: 32 (4) 263 19 42info@macvalves.be

MAC VALVES PACIFIC, INC.P.O. BOX 12221PENROSE, AUCKLANDNEW ZEALAND

TEL: 64 (9) 634-9400FAX: 64 (9) 634-9401www.macvalves.co.nzsales@macvalves.co.nz

MAC VALVES ASIA, INC.NO. 45, DONGYUAN ROADJHONGLI CITY, TAOYUAN COUNTY TAIWAN

TEL: 886 (3) 463-6868FAX: 886 (3) 463-4576mva@macasia.com.tw

MAC VALVES, INC.5555 ANN ARBOR ROADDUNDEE, MI 48131

TEL: 1 (734) 529-5099FAX: 1 (248) 863-2959

T H I N K G L O B A L A C T L O C A L O u r g l o b a l d i s t r i b u t i o n n e t w o r k i s k e e p i n g y o u r m a c h i n e s r u n n i n g a r o u n d t h e c l o c k a r o u n d t h e w o r l d m a c h i n e s r u n n i n g a r o u n d t h e c l o c k a r o u n d t h e w o r l d

MAC VALVES, INC.P.O. BOX 11130569 BECK ROADWIXOM, MI 48393-7011

MAC VALVES EUROPE, INC.RUE MARIE CURIE, 12B- 4431 ANS (LIEGE)BELGIUM

MAC VALVES PACIFIC, INC.P.O. BOX 12221PENROSE, AUCKLANDNEW ZEALAND

MAC VALVES ASIA, INC.NO. 45, DONGYUAN ROADJHONGLI CITY, TAOYUAN COUNTY TAIWAN

MAC VALVES, INC.5555 ANN ARBOR ROADDUNDEE, MI 48131

999BVBA

�