Pascal mag clamp
Transcript of Pascal mag clamp
Itami, Hyogo, Japan 664-8502TEL. 072-777-3333 FAX. 072-777-3520
Specifications are subject to change without prior notice.
CERTIFICATE OF APPROVAL ISO9001
PA-560E REV.0 2016.6
Pascal mag clampFor die casting machine
www.pascaleng.co.jp
S N
NS
N S
SN
SN
N N S
NS
S NSS
NS
N Neodymium magnet
Alnico magnet
Electromagnetic coil
Magnet core
Clamp plate
Lines of magnetic flux
Effective height of magnetic flux : Approx 20mm Plate thickness
35 mm
50 mm
52 mm
Mold Mold
Polarity is inverted by electromagnetic coil
Inverts the polarityof alnico magnet
Powerfully adheres mold
Electromagnetic coil is energized for 0.5 sec.
Polarity of alnico magnet is inverted.
Neodymium magnet and alnico magnet become homopolar.
Magnet core becomes a strong magnet to clamp the mold.
1
2
3
4
1
2
3
Electromagnetic coil is energized for 0.5 sec.
Polarity of alnico magnet is inverted.
Magnetic flux of neodymium magnet and alnico
magnet is not emitted from the surface of the
magnet core so that the mold can be unclamped.
Super strong permanentmagnet
Clamp(Magnetized) Unclamp(Demagnetized)
Clamp molds instantly with superstrong permanent magnets !
Pascal mag clamp is a mold clamp system for injection molding machines that clamps the mold with powerful
magnet force. The clamp plate is one set of two plates for movable platen and fixed platen sides.
● Mold can be adhered and detached instantly(0.5-4.5 seconds).
● Energization required only when switching on and off. No electricity consumed, thus no heat generation.
● As the mounting space for mold and automatic clamp is not required, the mold machine surface can be
maximized.
3,500kN(550ton) Die casting machine Mag clamp movable side
3,500kN(550ton) Die casting machine Mag clamp fixed side
M a g c l a m p
1
S N
NS
N S
SN
SN
N N S
NS
S NSS
NS
N Neodymium magnet
Alnico magnet
Electromagnetic coil
Magnet core
Clamp plate
Lines of magnetic flux
Effective height of magnetic flux : Approx 20mm Plate thickness
35 mm
50 mm
52 mm
Mold Mold
Polarity is inverted by electromagnetic coil
Inverts the polarityof alnico magnet
Powerfully adheres mold
Electromagnetic coil is energized for 0.5 sec.
Polarity of alnico magnet is inverted.
Neodymium magnet and alnico magnet become homopolar.
Magnet core becomes a strong magnet to clamp the mold.
1
2
3
4
1
2
3
Electromagnetic coil is energized for 0.5 sec.
Polarity of alnico magnet is inverted.
Magnetic flux of neodymium magnet and alnico
magnet is not emitted from the surface of the
magnet core so that the mold can be unclamped.
Super strong permanentmagnet
Clamp(Magnetized) Unclamp(Demagnetized)
M a g c l a m p s t r u c t u r e a n d f u n c t i o n
Contact Pascal for the details.
2
Itami, Hyogo, Japan 664-8502TEL. 072-777-3333 FAX. 072-777-3520
Specifications are subject to change without prior notice.
CERTIFICATE OF APPROVAL ISO9001
PA-560E REV.0 2016.6
Pascal mag clampFor die casting machine
www.pascaleng.co.jp