Parts Model List - Brand New Enginesbrandnewengines.com/pdf/1695539ipl.pdf26 794696 KEY, BRIGGS...
32
Not for Reproduction 1695539 Parts List Model 10/2009 Rev. Date B 1737492 Revision
Transcript of Parts Model List - Brand New Enginesbrandnewengines.com/pdf/1695539ipl.pdf26 794696 KEY, BRIGGS...
Not for
Reprod
uctio
n
1695539Parts List
Model
10/2009Rev. DateB
1737492Revision
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
Table Of Contents
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGESEngine .................................................................................................................................................................. 4Frame ................................................................................................................................................................... 6Drive ..................................................................................................................................................................... 8Auger Housing ..................................................................................................................................................... 10Discharge Chute .................................................................................................................................................. 12Handle Assembly ................................................................................................................................................. 14Shift Yoke ............................................................................................................................................................. 16Chute Rod ............................................................................................................................................................ 18Control Panel ....................................................................................................................................................... 20Decals .................................................................................................................................................................. 22Gear Case ............................................................................................................................................................ 24Wheels ................................................................................................................................................................. 26
Not for
Reprod
uctio
n
EngineNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0003
The above parts group applies to the following Mfg. Nos.:
41737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Engine
Footnotes
CORD, Starter 1 6219MAENGINE (Model# 12A1130138E8) 2 -----BOLT, CARRIAGE 5/16-18 3 002X97MARETAINER, PUSH 4 028X76MANUT 5/16-18 5 1960686SMPULLEY, ENGINE 6 1736102YPWASHER 7 17X146MAWASHER .38ID 8 71060MASCREW, 3/8-24 x 1.00 9 910828MABELT, V 3L 10 1733324SMBELT, V 4L 11 1736421YPBRACKET ASSEMBLY, IDLER 12 1501112YZMABUSHING, IDLER BRACKET 13 1501065MAWASHER, SPLIT 14 71060MASCREW 5/16-24 X 0.75 15 710097MASPRING, IDLER TRACTION DRIVE 16 53704MAPULLEY, IDLER 17 1502120MANUT, JAM 3/8-16 18 590MAGUIDE, BELT 20 1501201MAWASHER .31X.58X.08 22 71060MASCREW, 5/16-24 x 0.75 24 710097MAFRAME, MOTORBOX (5-11HP) 25 -----PLATE, ENGINE MOUNT 25-1 1735753BIYPSCREW, TAP 1/4-20 X .63 25-2 310169MASCREW, TAP 5/16-18 X .50 25-3 25X020MAFRAME, MOTOR BOX 25-4 1740572BIYPKEY, BRIGGS ENGINE 26 794696OWNER’S MANUAL -- 1742237DEFLECTOR, Muffler 27 794213SCREW 28 699479HEAT SHIELD, Muffler 29 1734732SMSCREW, Hex-Washer 30 1736103SM
Note* See your local Briggs & Stratton distributor for parts and service.
The above parts group applies to the following Mfg. Nos.:
51737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
FrameNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0007
The above parts group applies to the following Mfg. Nos.:
61737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Frame
Footnotes
COVER, BOTTOM 90 1740906HMASCREW, 1/4-20X .63 91 310169MAIDLER ASSEMBLY, AUGER 103 1501226YZMAPIN, HAIR .38DIAX1.64LG 105 711682MAPIN, CLEVIS 3/16" DIA 106 1735135SMSPRING, TENSION 107 165X159MAARM, CONTROL 108 1733451SMBOLT, 3/8-16X1.25 CARR. 110 585781MAWASHER, FLAT 111 711617MAWASHER 112 017X48MASCREW, TAP 5/16-18 X 0.50 122 25X020MASCREW, TAP 5/16-18 X 0.75 123 25X021MAPULLEY, IDLER 148 1502120MANUT, JAM 3/8-16 149 590MACOVER, BELT 160 1502169MASCREW, TAP 162 26X306MAWASHER, FLAT 167 71067MASPACER, AUGER BRACKET 168 1502041MA
The above parts group applies to the following Mfg. Nos.:
71737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
DriveNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0009
The above parts group applies to the following Mfg. Nos.:
81737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Drive
Footnotes
AXLE, Swing Plate 200 1501092YZMA 1CHAIN, Roller, #420 x 19.00 201 579851MA 1BEARING AND RETAINER ASSEMBLY 203 334163MA 1WASHER 204 579858MA 2SCREW, TAP 5/16-18 x 1/2 206 25X020MA 4ASSEMBLY, Hex Shaft 207 1501236MA 1CHAIN, ROLLER, #420 x 18.00 LG 208 579868MA 1BEARING, Trunion Clutch, R 210 337029MA 1WHEEL, Friction Disk 212 1501435MA 1BOLT, Hex, 1/4-20 x 5/8 213 001X38MA 3NUT, Keps Hex, 1/4-20 215 303008MA 3RING, Retext 217 1733326SM 1WASHER, Flat, 1/2 218 579858MA 2BEARING AND RETAINER ASSEMBLY 220 334163MA 2SCREW, Tap 5/16-18 x 1/2 221 25X020MA 1FRICTION PULLY 223 1501115MA 1PLATE, Swinging 225 1501057YZMA 1SPACER, Friction Pulley 226 1501158MA 1NUT, Flange Lock, 3/8-24 227 15X114MA 1RETAINER, Ring 229 11X30MA 2ASSEMBLY, Leaf Spring Link 230 1502105YZMA 2RETAINER, Ring 232 11X30MA 2SPRING, Extension 234 1736469YP 3SPROCKET, 33T/7 236 1501237MA 1WASHER, Flat 238 71074MA 2
The above parts group applies to the following Mfg. Nos.:
91737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Auger HousingNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0011
The above parts group applies to the following Mfg. Nos.:
101737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Auger Housing
Footnotes
PULLEY, 4L 6.12X .67 480 1501211MASCREW, 5/16-18 x 0.63 481 577400MAKEY, SQUARE 3/16 X 3/4 482 2001022MASPACER, FRICTION PULLEY 485 1501158MARETAINER, BALL BRNG 490 582957YZMABEARING, BALL 491 1705897SMBOLT, HEX 5/16-18X .50 493 001X45MANUT, 5/16-18 HEXWDFLLK 499 710026MAASSY, HOUSING 500 729061BIYPBLADE, SCRAPER 510 760657E701MABOLT, 5/16-18X.75 511 340720MANUT, 5/16-18 514 710026MAPLUG 515 309235MAASSY, LH AUGER 520 729037BJYPASSY, RH AUGER 521 729038BJYPSCREW, 1/4-20X1.75 522 9524MASPACER, SLEEVE 523 3943MANUT, 1/4-20 524 73826MABEARING, FLANGE 525 9517MANUT, 5/16-18 526 711862MASCREW, 5/16-18 x 0.75 527 9357MASKID, HEIGHT ADJUST 540 1740912AYPBOLT, 5/16-18 X .75 541 7090799SMNUT, 5/16-18 544 710026MABRUSH, CLEANOUT 550 1736094YPCLIP, RETAINER 551 1501672MASCREW 552 06X115MANUT 553 15X146MABLOCK 554 578063MAKIT, SHEAR BOLT -- 1501216MA
The above parts group applies to the following Mfg. Nos.:
111737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Discharge ChuteNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0013
The above parts group applies to the following Mfg. Nos.:
121737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Discharge Chute
Footnotes
CHUTE ASSEMBLY 580 1736313YPWING KNOB 597 1501260MABOLT, 5/16-18 x 3/4 599 1931333SMBOLT, 5/16-18 x 1 601 2X100MAWASHER, Flat 602 71071MANUT, Hex, Nylock, 5/16-18 603 71038MACHUTE COLLAR 606 1501932YZMASCREW, 1/4-20 x 3/4 607 02X101MANUT, 1/4-20 Hex Nylock 609 15X145MARING, Retainer, Inner 610 1741917YPRING, Retainer, Outer 611 1501282MACAPSCREW, Hex-Flange, 1/4-20 x 3/4 613 1935450SMNUT, Hex, Nylock Flange, 1/4-20 614 5025391SMRING, Chute Base 615 1736435AYP
The above parts group applies to the following Mfg. Nos.:
131737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Handle AssemblyNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0017
The above parts group applies to the following Mfg. Nos.:
141737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Handle Assembly
Footnotes
HANDLE, UPPER LH 720 1740587HMAHANDLE, UPPER RH 721 1740573HMASCREW, 5/16-18 x 2.75 724 11234MAWASHER, FLAT 725 71071MAWASHER, SPTLK .31X.58X.08 726 71060MANUT, 5/16-18 REGHEX 727 15X144MASTOP, RED PLASTIC 728 11261MAGRIP-HANDLE FINGER 729 337399MALEVER, ASSY CLUTCH DRIVE RH 730 1740700HMALEVER, ASSY CLUTCH DRIVE LH 731 1740699HMAROD, PIVOT CLUTCH 733 337381MANUT, PUSH ON CAP 734 761105MASPACER-HANDLE 735 337373MABUMPER, RECTANGLE 739 4049MACABLE, CLUTCH 28.44L 740 1501123MACABLE, AUGER CLUTCH 741 761872MABRACKET, CABLE ADJUSTER 743 313441MASPRING, AUGER CLUTCH 744 1673MANUT, 1/4-20 745 15X145MAHANDLE, LOWER 750 1740701HMASCREW 751 25X021MABRKT, GEAR SELECTOR 755 1740698HMASCREW, 5/16-18 x 2.00 756 6751MASCREW, 1/4-20 X 0.63 757 310169MASPOOL-CABLE, AUGER CLUTCH 759 579860MABRACKET, CABLE SPOOL YZ 760 1501059YZMACABLE, LOWER DRIVE 12" 762 1501122MABOLT, HEX 1/4-20 X 1.50 YZ 763 001798MABOOT, CLUTCH SPRING 765 308146MAGRIP 766 337380MA
The above parts group applies to the following Mfg. Nos.:
151737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Shift YokeNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0021
The above parts group applies to the following Mfg. Nos.:
161737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Shift Yoke
Footnotes
ROD, SHIFT 790 1740946AYPSCREW, 1/4-20X.75 791 302628MANUT, 1/4-20 792 73826MAKNOB, SLIP 796 331624MALEVER, SPRING 800 760564MASCREW, 1/4-20X.75 801 302628MANUT, 1/4-20 802 73826MABEARING, FLANGED 811 579944MAROD ASSY., SPEED SELECT 812 1501085YZMARETAINER, RING 813 11X30MAWASHER 814 579858MA
The above parts group applies to the following Mfg. Nos.:
171737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Chute RodNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0015
The above parts group applies to the following Mfg. Nos.:
181737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Chute Rod
Footnotes
ASSEMBLY, YOKE & ROD 852-1 1501533YZMASPRING 852-2 164X37MAGEAR, CHUTE ROTATION 9T 852-3 1501067MAWASHER 852-4 017X48MAPIN, COTTER 852-5 579493MABRACKET, CHUTE GEAR 852-6 1740591AYPPIN, HAIR 852-7 1501293MAASSEMBLY, YOKE ADAPTER YZ 852-8 1501075YZMAPIN, HAIR 852-9 711682MAPIN, UNIVERSAL JOINT 852-10 578060MAPIN, CLEVIS 852-11 578309MAHOUSING, UNIVERSAL 852-13 578063MAKNOB, SLEEVE 854 51443MAFLATWASHER 855 309312MANUT, PUSH ON 3/8" 856 73664MAEYE BOLT 3/8-16X6.50 860 1501456MAGROMMET, EYE BOLT 861 148MANUT, 3/8-16 HEXJAM 863 71045MAFLATWASHER .406X.81X.066 864 71072MANUT, 3/8-16 HEXNYL 867 71046MABOLT, CARRIAGE 1/4-20 X 1.00 868 02X101MANUT, 1/4-20 869 15X145MACRANK, ASSY CHUTE 870 1501074YZMA
The above parts group applies to the following Mfg. Nos.:
191737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Control PanelNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0023
The above parts group applies to the following Mfg. Nos.:
201737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Control Panel
Footnotes
PANEL 770 1740930BIYPSCREW 771 001798MAWASHER 772 71067MANUT 773 15X145MA
The above parts group applies to the following Mfg. Nos.:
211737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
DecalsNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0027
The above parts group applies to the following Mfg. Nos.:
221737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Decals
Footnotes
DECAL, HAND CONTROL 1 1741052MADECAL, MURRAY ULTRA CONTROL PANEL 2 1742246YPDECAL, ISO CHUTE CE 3 48X5578MADECAL, 104db CE 4 48X5386MADECAL, FACE HEAD PHONES 5 304427MADECAL, MURRAY 8.00/24" 6 1742247YPDECAL, ISO AUGER CE 7 1740980MADECAL, GEAR SELECT 8 340568MADECAL, BELT ADJUSTMENT 9 5131MADECAL, CLEAN & CLEAR BRUSH 10 48X5960MADECAL, DANGER CHUTE 11 1740979MA
The above parts group applies to the following Mfg. Nos.:
231737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Gear CaseNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0005
The above parts group applies to the following Mfg. Nos.:
241737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Gear Case
Footnotes
CASE, Gear, Right 300 10577MACASE, Gear, Left 301 10576MASCREW, 1/4-20 x 3/4 303 710025MANUT, 1/4-20 304 15X143MASCREW, 3/8-16 x 1/2 306 9344MASEAL, Oil 310 9566MABEARING, Flange 311 50304MAWASHER, Flat 312 48275MASHAFT, Auger Output 313 1501189MAGASKET, Gearbox 314 51279MAGEAR, Worm 315 51405MAKEY, Woodruff 316 431787MABEARING, Flange 320 50221MASHAFT, Auger Input (Impeller) 321 1501191MACOLLAR, Thrust 322 580295MAPIN, Spring 323 454565MAWASHER, Flat 324 48275MABEARING, Roll 325 50684MABEARING, Flange 326 50304MASEAL, Oil 327 9566MAIMPELLER 340 1740929BJYPPIN, Spring 341 454565MA10oz TUBE LUBRIPLATE (Not Illustrated) -- 333431MA
The above parts group applies to the following Mfg. Nos.:
251737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
WheelsNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
0023
The above parts group applies to the following Mfg. Nos.:
261737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
PART NO. DESCRIPTIONREF NO QTY.Wheels
Footnotes
SHAFT, Axle 650 1501562YZMASPROCKET & HUB 652 1501089MASCREW, 1/4-20 x 1-3/4 653 01X193MANUT, Hex Nylock, 1/4-20 654 15X145MABEARING, Axle 655 1501114MAFLATWASHER 671 017X83MABUSHING, Wheel 673 1501139MATIRE & RIM 675 580349MASCREW, 1/4-20 x 1-3/4 676 577015MANUT, Hex Nylock, 1/4-20 677 15X145MARING, Retainer 678 239MAPIN, Klik 679 73842MA
The above parts group applies to the following Mfg. Nos.:
271737492 Rev B
1695539 - Murray Dual Stage Snowthrower (2008)
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
HardwareGrade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of in/lbs in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 27 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5
torques.b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque SpecificationsCommon Hardware Types
Screw, 1/2 x 2Body
Diameter
BodyLength
InsideDiameter
Nut, 1/2”
NoMarks
3/8” Bolt or NutWrench—9/16”
3/8
5/16” Bolt or NutWrench—1/2”
5/16
1/4” Bolt or NutWrench—7/16”
1/4
1/2” Bolt or NutWrench—3/4”
1/2DIA.
7/16DIA.
7/16” Bolt or NutWrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is theNominal size, meaning the inside diameter is 1/2 inch; if asecond number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, thismeans the Nominal size, or body diameter is 1/2 inch; thesecond number represents the threads per inch (16 in thisexample, and the final number is the body length of thebolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed tohelp you select the appropriate hardware and tools.
01/4
3/41/2
11/4
3/41/2
21/4
3/41/2
31/4
3/41/2
4
Not for
Reprod
uctio
n
1737492 Rev B
