Partek/Atlantic - GroupMaxigroupmaxi.com.br/...conexoes-PTFE-partek-products.pdf · Overview...
Transcript of Partek/Atlantic - GroupMaxigroupmaxi.com.br/...conexoes-PTFE-partek-products.pdf · Overview...
Partek/AtlanticOther PFA/PTFE Products
Catalog 4183/USAApril 2003
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
Table of Contents
Technical Information ........................................................................................................................................ 3
RegulatorsPR-1 1/4” PTFE Pressure Regulator ................................................................................................... 4PR-3 1/2” and 1” PTFE Pressure Regulator ........................................................................................ 6BR-1 1/4” PTFE Back Pressure Regulator .......................................................................................... 8BR-3 1/2” and 1” PTFE Back Pressure Regulator ............................................................................... 10
FlowmetersFM-3 PFA/PTFE Flowmeters .............................................................................................................. 12
PumpsPP-04 4 Liter PTFE Pneumatic Bellows Pump ..................................................................................... 14PP-10 10 Liter PTFE Pneumatic Bellows Pump ................................................................................... 14PP-20 20 Liter PTFE Pneumatic Bellows Pump ................................................................................... 14
Gauge ProtectorsGP PFA Gauge Protector ................................................................................................................. 16GPL PTFE Large Diaphragm Gauge Protector .................................................................................. 18GPIL PFA In-line Gauge Protector ...................................................................................................... 20
Spray GunsSG-1 PFA DI Water Spray Gun ........................................................................................................... 22SG-1 PFA Nitrogen Gun ...................................................................................................................... 24
OtherQC-1 1/4” - 1” PTFE Quick Coupler .................................................................................................... 26VV Venturi/ Vacuum Generator ........................................................................................................ 28KM K-MAX Stream Switching Valve ................................................................................................. 30KMF PTFE Filter ................................................................................................................................ 32
Specialty and Custom ....................................................................................................................................... 34
Offer of Sale ....................................................................................................................................................... 38
Copyright 2003, Parker Hannifin Corporation, All Rights Reserved
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation byusers having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current productcatalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.
WARNING
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
3
OverviewPartek/Atlantic produces products that are made from only the finest Fuoropolymers available. TheseFluoropolymers are resistant to numerous chemicals and solvents. This information provides only a brief technicaloverview . For more comprehensive technical and chemical compatibility information, please ask for TechnicalBulletin 0002-T1/USA.
Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures• Non-solubility • Low dissipation factor • Low coefficient of friction• Long term weatherability • High arc resistance • Stability at high temperatures• Non-adhesiveness • High surface resistance• Nonflammability • High volume resistivity
PTFE is a fluorocarbon resin that is isostatically compression molded into various shapes and configurations. It ischemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodiumhydroxide, elemental fluorine and certain fluorinating agents. At Partek we use PTFE for machining the bodies andcomponents of various valves and manifolds. It offers chemical resistance and stability at high temperatures.
Modified PTFE material is used primarily for diaphragms and bellows in our products. This material has the sameprocessing and chemically resistant characteristics as the standard product but offers superior cycle life andintegrity in diaphragm products.
PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether. The resultant polymer contains the car-bon-fluorine backbone chain typical of PTFE, but unlike PTFE, does not require special fabricating techniques.PFA pellets have good melt flow characteristics that allow for processing via extrusion, compression, blow, transferand injection molding methods. It has outstanding chemical and solvent resistant characteristics over a tempera-ture range even greater than PTFE. PFA is offered in various grades of purity and cleanliness making it the mate-rial of choice for the semiconductor market.
Cv and Kv Formulas
SGP
Q = Kv
Q = Cv
YP
P = Pressure Drop (PSIG)
SG = Specific Gravity
Q = Flow (GPM)
P = Pressure Drop (BAR)
Y = Specific Gravity (kg/cm3)
Q = Flow (LPM)
1 Kv = 14.26 Cv
“CV” flow factor is the number of gallons of fluid that pass
through a given orifice area in one minute, at a pressuredrop of 1 PSIG.
“KV” flow factor is the number of liters of fluid that pass
through a given orifice area in one minute, at a pressuredrop of 1 bar.
For operation at temperatures above ambient conditions,please refer to the chart above for reduced pressure ratings.
PERCENT OF RATED PRESSURE VS. TEMPERATURE
204˚C14593+38-51 -18
100
90
80
40
60
70
50
30
20
0
PER
CEN
T O
F R
ATE
D O
PER
ATI
NG
PR
ESSU
RE
OPERATING TEMPERATURE
10
400˚F300200+100-60
Technical Information
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
4
Product OverviewThe PR-1 Pressure Regulators are designed for use inhigh purity semiconductor applications, and are alsoideally suited for ultra-pure water and aggressivechemicals. The design utilizes a machined PTFE bodywith precision machined seat.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Modified PTFENon Wetted Surfaces - Anodized Aluminum, ABS, Brass, SS,
PVDF, SS Spring, Chrome VanadiumDie Spring, HDPE.
Pressure Ranges:
Max Primary Pressure - 120 PSIG (8.3 bar)Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG
Pressure ranges above are for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0°F - 150°F (-17°C - 66° C) Ambient
0°F - 266°F (-17°C - 130° C) Fluid
PR-1 Pressure Regulator
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Non-relieving design-requires a 10 psi differ-ential across the valve.
Tongue and groovediaphragm.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Stabilizes systempressure. Ideal for usein DI water systems.
Low hysteresis.
Seal provides protectionfor springs and adjust-ing screw.
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
5
2X .402X .40 [10.16] [10.16]
2X .802X .80 [20.32] [20.32]
2X .402X .40 [10.16] [10.16]
2X .802X .80 [20.32] [20.32]
1.13 SQ.1.13 SQ. [28.58] [28.58]
[12.70] [12.70].50.50
.69.69 [17.46] [17.46]
2X .402X .40 [10.16] [10.16]
2X .402X .40 [10.16] [10.16]
2X .802X .80 [20.32] [20.32]
1.13 SQ.1.13 SQ. [28.58] [28.58]
2X .802X .80 [20.32] [20.32]
.50 [12.70].50 [12.70]
Ø1.981.98 [50.29] [50.29]
5.34 MAX.5.34 MAX. [135.56] [135.56]
Ø1.001.00 [25.40] [25.40]
.80.80 [20.32] [20.32]
FNPTFNPT1/4"1/4" .50.50
[12.70] [12.70]
5.60 MAX.5.60 MAX. [142.20] [142.20]
Ø2.252.25 [57.15] [57.15]
Ø1.501.50 [38.10] [38.10]
.50 MAX..50 MAX.[12.70][12.70]
1 3/8-141 3/8-14TO CLEARTO CLEARPANEL HOLEPANEL HOLE
(PR-1-21XX-X)(PR-1-21XX-X)FNPT GAUGE PORT FNPT GAUGE PORT OPTIONAL 1/4" OPTIONAL 1/4"
.33.33[8.37][8.37]
FNPTFNPT1/4"1/4"
1/4" PARFLARE1/4" PARFLARE
1.151.15 [29.21] [29.21]
3/8" PARFLARE3/8" PARFLARE
1.231.23 [31.24] [31.24]
3/8" FNPT3/8" FNPT
OPTIONAL 1/4" OPTIONAL 1/4"
(PR-1-X1XX-X)(PR-1-X1XX-X)FNPT GAUGE PORT FNPT GAUGE PORT
STYLE 1STYLE 1 STYLE 2STYLE 2
OPTIONAL PANEL NUTOPTIONAL PANEL NUT(1013-0015) (1013-0015)
To add panel nut (1013-0015) to Style 1 add -P to final suffix of model number (i.e. PR-1-2114-2-P). Parflare models are suppliedwith PVDF nuts. For PFA nuts add -T to final suffix of model number (i.e. PR-1-1164-1-T). Please consult factory for otheravailable configurations or trim materials.
rebmuNledoM elytS P noitarugifnoCtroerusserPyradnoceS
)GISP(lairetaMmirT
1-4111-1-RP 2 TPNF"4/1 GISP03-0 munimulAdezidonA
2-4111-1-RP 2 TPNF"4/1 GISP06-0 munimulAdezidonA
1-4611-1-RP 2 eralfraP"4/1 GISP03-0 munimulAdezidonA
1-4121-1-RP 2 TPNF"4/1 GISP03-0 munimulAdezidonA
1-4621-1-RP 2 eralfraP"4/1 GISP03-0 munimulAdezidonA
2-4621-1-RP 2 eralfraP"4/1 GISP06-0 munimulAdezidonA
2-4112-1-RP 1 TPNF"4/1 GISP06-0 EPDH
1-4122-1-RP 1 TPNF"4/1 GISP03-0 EPDH
2-4622-1-RP 1 eralfraP"4/1 GISP06-0 EPDH
1-6622-1-RP 1 eralfraP"8/3 GISP03-0 EPDH
2-6622-1-RP 1 eralfraP"8/3 GISP06-0 EPDH
2-6124-1-RP 2 TPNF"8/3 GISP06-0 munimulAdetaoCFDVP
2-4624-1-RP 2 eralfraP"4/1 GISP06-0 munimulAdetaoCFDVP
PR-1 Pressure Regulator
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
6
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Modified PTFENon Wetted Surfaces - Anodized Aluminum, ABS, Brass, SS,
PVDF, SS Spring, Chrome VanadiumDie Spring, HDPE.
Pressure Ranges:
Max Primary Pressure - 120 PSIG (8.3 bar)Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG
Pressure ranges above are for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0°F - 150°F (-17°C - 66° C) Ambient
0°F - 266°F (-17°C - 130° C) Fluid
Product OverviewThe PR-3 Pressure Regulators are designed for use inhigh purity semiconductor applications, and are alsoideally suited for ultra-pure water and aggressivechemicals. The design utilizes a machined PTFE bodywith precision machined seat and diaphragm sealingarea. The large diaphragm allows for quicker reactiontime to changes upstream, preventing the effects ofpressure surges to be transferred downstream.
PR-3 Pressure Regulator
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Non-relieving designrequires a 10 psi differ-ential across the valve.
Tongue and groovediaphragm.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Stabilizes systempressure. Ideal for usein DI water systems.
Low hysteresis.
Seal provides protectionof springs and adjustingscrew.
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
7
B
A
OPTIONAL 1/4"FNPT GAUGE PORT (PR-3-X1XX-X)
C (MAX)
B
A
C (MAX)
Ø3.50 [88.90]
Ø3.50 [88.90]
STYLE 1
STYLE 2STYLE 2
Parflare models are supplied with PVDF nuts. For PFA add -T to final suffix of model number (i.e. PR-3-3268-2-T). Please consultfactory for other available configurations or trim materials.
rebmuNledoM elytS P noitarugifnoCtroerusserPyradnoceS
)GISP(lairetaMmirT
1-8111-3-RP 1 TPNF"2/1 GISP03-0 munimulAdezidonA
2-8111-3-RP 1 TPNF"2/1 GISP06-0 munimulAdezidonA
2-8611-3-RP 2 eralfraP"2/1 GISP06-0 munimulAdezidonA
1-8121-3-RP 1 TPNF"2/1 GISP03-0 munimulAdezidonA
2-8121-3-RP 1 TPNF"2/1 GISP06-0 munimulAdezidonA
1-8621-3-RP 2 eralfraP2/1 GISP03-0 munimulAdezidonA
1-61111-3-RP 1 TPNF"1 GISP03-0 munimulAdezidonA
2-61111-3-RP 1 TPNF"1 GISP06-0 munimulAdezidonA
1-8113-3-RP 1 TPNF"2/1 GISP03-0 FDVP
2-8113-3-RP 1 TPNF"2/1 GISP06-0 FDVP
2-8613-3-RP 2 eralfraP"2/1 GISP06-0 FDVP
2-8623-3-RP 2 eralfraP"2/1 GISP06-0 FDVP
1-8114-3-RP 1 TPNF"2/1 GISP03-0 munimulAdetaoCFDVP
2-8114-3-RP 1 TPNF"2/1 GISP06-0 munimulAdetaoCFDVP
1-8124-3-RP 1 TPNF"2/1 GISP03-0 munimulAdetaoCFDVP
2-8124-3-RP 1 TPNF"2/1 GISP06-0 munimulAdetaoCFDVP
).ni(SNOISNEMID (SNOISNEMID mm ).ELYTS A B C A B C
1-8111-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8111-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8611-3-RP 2 53.4Ø 18.1 36.6 94.011Ø 79.54 04.861
1-8121-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8121-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
1-8621-3-RP 2 53.4Ø 18.1 36.6 94.011Ø 79.54 04.861
1-61111-3-RP 1 05.4Ø 54.2 29.7 03.411Ø 32.26 71.102
2-61111-3-RP 1 05.4Ø 54.2 29.7 03.411Ø 32.26 71.102
1-8113-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8113-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8613-3-RP 2 53.4Ø 18.1 36.6 94.011Ø 79.54 04.861
2-8623-3-RP 2 53.4Ø 18.1 36.6 94.011Ø 79.54 04.861
1-8114-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8114-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
1-8124-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
2-8124-3-RP 1 52.3Ø 06.1 25.6 .28Ø 55 46.04 16.561
PR-3 Pressure Regulator
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
8
Product OverviewThe BR-1 Back Pressure Regulators are designed foruse in high purity semiconductor applications, and arealso ideally suited for ultra-pure water and aggressivechemicals. The design utilizes a machined PTFE bodywith precision machined seats.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Modified PTFENon Wetted Surfaces - Anodized Aluminum, ABS, Brass, SS,
PVDF, SS Spring, Chrome VanadiumDie Spring, HDPE.
Pressure Ranges:
Max Primary Pressure - 120 PSIG (8.3 bar)Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG
Pressure ranges above are for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0°F - 150°F (-17°C - 66° C) Ambient
0°F - 266°F (-17°C - 130° C) Fluid
BR-1 Back Pressure Regulator
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Non-relieving designrequires a 10 psidifferential across thevalve.
Tongue and groovediaphragm.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Stabilizes systempressure. Ideal for usein DI water systems.
Low hysteresis.
Seal provides protectionfor springs andadjusting screw.
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
9
OPTIONAL 1/4" FNPT GAUGE PORT (BR-1-X1XX-X)
.69 [17.46]
2X .40 [10.16]
2X .40 [10.16]
2X .80 [20.32]
1.13 SQ. [28.58]
2X .80 [20.32]
.50 [12.70]
Ø1.98 [50.29]
5.34 MAX. [135.56]
Ø1.00 [25.40]
.33[8.37]
FNPT1/4"
1/4" PARFLARE
1.15
BRACKETED DIMENSIONSARE IN mm.
rebmuNledoM P noitarugifnoCtroerusserPyradnoceS
)GISP(lairetaMmirT
Parflare models are supplied with PVDF nuts. For PFA add -T to final suffix of model number (i.e. BR-1-1164-1-T). Please consultfactory for other available configurations or trim materials.
BR-1 Back Pressure Regulator
1-4111-1-RB TPNF"4/1 GISP03-0 munimulAdezidonA
2-4111-1-RB TPNF"4/1 GISP06-0 munimulAdezidonA
1-4121-1-RB TPNF"4/1 GISP03-0 munimulAdezidonA
2-4121-1-RB TPNF"4/1 GISP06-0 munimulAdezidonA
1-4611-1-RB eralfraP"4/1 GISP03-0 munimulAdezidonA
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
10
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Modified PTFENon Wetted Surfaces - Anodized Aluminum, ABS, Brass, SS,
PVDF, SS Spring, Chrome VanadiumDie Spring, HDPE.
Pressure Ranges:
Max Primary Pressure - 120 PSIG (8.3 bar)Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG
Pressure ranges above are for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0°F - 150°F (-17°C - 66° C) Ambient
0°F - 266°F (-17°C - 130° C) Fluid
Product OverviewThe BR-3 Back Pressure Regulators are designed foruse in high purity semiconductor applications, and arealso ideally suited for use in ultra-pure water andaggressive chemicals. The design utilizes a machinedPTFE body with precision machined seat and diaphragmsealing area. The larger diaphragm allows for quickerreaction time to changes upstream, preventing pressuresurges from affecting and changing upstream processes.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Stabilizes system. Idealfor DI water systems.
Low Hysteresis.
Seal provides protectionof springs and adjustingscrew.
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.
Provides over five timesthe flexural life ascompared toconventional PTFE.
Non-relieving designrequires a 10 psidifferential across thevalve.
Tongue and groovediaphragm.
BR-3 Back Pressure Regulator
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
11
rebmuNledoM P noitarugifnoCtroerusserPyradnoceS
)GISP(lairetaMmirT
Parflare models are supplied with PVDF nuts. For PFA add -T to final suffix of model number (i.e. BR-3-42616-1-T). Pleaseconsult factory for other available configurations or trim materials.
1-4111-3-RB TPNF"4/1 GISP03-0 munimulAdezidonA
2-4111-3-RB TPNF"4/1 GISP06-0 munimulAdezidonA
1-8111-3-RB TPNF"2/1 GISP03-0 munimulAdezidonA
2-8111-3-RB TPNF"2/1 GISP06-0 munimulAdezidonA
2-8611-3-RB eralfraP"2/1 GISP06-0 munimulAdezidonA
1-4113-3-RB TPNF"4/1 GISP03-0 FDVP
1-8113-3-RB TPNF"2/1 GISP03-0 FDVP
2-8113-3-RB TPNF"2/1 GISP03-0 FDVP
1-8623-3-RB eralfraP"2/1 GISP03-0 FDVP
1-8114-3-RB TPNF"2/1 GISP03-0 munimulAdetaoCFDVP
2-8114-3-RB TPNF"2/1 GISP06-0 munimulAdetaoCFDVP
1-8624-3-RB eralfraP"2/1 GISP03-0 munimulAdetaoCFDVP
1-61114-3-RB TPNF"1 GISP03-0 munimulAdetaoCFDVP
2-61114-3-RB TPNF"1 GISP06-0 munimulAdetaoCFDVP
1-61624-3-RB eralfraP"1 GISP03-0 munimulAdetaoCFDVP
).ni(SNOISNEMID (SNOISNEMID mm ).ELYTS A B C A B C
1-4111-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
2-4111-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
1-8111-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
2-8111-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
2-8611-3-RB 1 05.3Ø 57. 56.6 09.88Ø 50.91 19.861
1-4113-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
1-8113-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
2-8113-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
1-8623-3-RB 1 05.3Ø 57. 56.6 09.88Ø 50.91 19.861
1-8114-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
2-8114-3-RB 1 05.3Ø 57. 25.6 09.88Ø 50.91 16.561
1-8624-3-RB 1 05.3Ø 57. 56.6 09.88Ø 50.91 19.861
1-61114-3-RB 2 00.5Ø 52.1 49.7 00.721Ø 57.13 86.102
2-61114-3-RB 2 00.5Ø 52.1 49.7 00.721Ø 57.13 86.102
1-61624-3-RB 2 00.5Ø 52.1 51.8 00.721Ø 57.13 10.702
OPTIONAL 1/4"
(BR-3-X1XX-X)FNPT GAUGE PORT
A
FNPT
C(MAX.)
B
STYLE 21" PARFLARE
STYLE 2
3.10 [78.73]
1/2" PARFLARE
2.20 [55.75]
STYLE 1
(BR-3-X1XX-X)FNPT GAUGE PORTOPTIONAL 1/4"
C(MAX.)
B
A
FNPT
STYLE 1
BR-3 Back Pressure Regulator
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
12
FeaturesTongue and groovebarrel to body seals.
Molded PFA barrel.
Numerous endconnections and flowrates.
BenefitsZero leakage and allows360 degree portorientation.
PFA is most chemicallycompatible and itstranslucency makes forprecise flowmeasurement.
Versatility to provideexact model forapplication.
Product OverviewThe FM-3 Flowmeter is designed for all high purityapplications where precise measurement and control offluids is required. The FM-3 Flowmeter utilizes precisionmachined PTFE bodies and needle valve componets anda molded high purity PFA barrel. Models available forprecision metering from 0-5000 cc/min. Rather thantypical face-to-face seals, the FM-3 utilizes tongue andgroove technology to seal the barrel to the bodies,creating a more postive seal. An integral needle valve isalso available. Panel nut mounting is standard regardlessof the type of end connection.
SpecificationsMaterials of Construction:
Wetted Surfaces - PFA and PTFEExternal Surfaces - PTFE, PFA, and PVDF
Pressure Ranges:
0 PSIG (0 mbar) to 120 PSIG (8.3 bar)
Pressure range above is for operation at ambient temperatures.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0° - 212° F (-17° - 100° C) Ambient
0° - 266° F (-17° - 130° C) Fluid
FM-3 Flowmeter
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
13
E
EASC
INR
INERCE
AS
ESAER
INC
I
CNRASE
E
ESAER
INC
I
CNRASE
E
EASECNI
R
RENC
IE S A
[31.24] [31.24]1.23 1.23
WIDTHWIDTHMAX. PANELMAX. PANEL2X .25 [6.35]2X .25 [6.35]
[13.21] [13.21].52 .52
[149.01] [149.01]5.87 5.87 [127.33] [127.33]
5.01 5.01 2X .50 [12.7] 2X .50 [12.7] MAX. PANELMAX. PANELWIDTHWIDTH
[172.78] [172.78]6.80 6.80
.50 [12.7] .50 [12.7] MAX. PANELMAX. PANEL
WIDTHWIDTH
[16.36] [16.36].64 .64
[46.25] [46.25]1.82 1.82
[156.21] [156.21]6.15 6.15
[117.60] [117.60]4.63 4.63
[150.22] [150.22]5.91 5.91
[31.75] SQ. [31.75] SQ.2X 1.25 2X 1.25
[128.58] [128.58]5.06 5.06 .50 [12.7] .50 [12.7]
MAX. PANELMAX. PANELWIDTHWIDTH
[149.92] [149.92]5.90 5.90
[166.44] [166.44]6.55 6.55
HEXHEX2X 1 5/16"2X 1 5/16"
3/8" PARFLARE3/8" PARFLARE
[29.21] [29.21]1.151.15
THREADTHREAD1-20 UNEF-2A1-20 UNEF-2ATO CLEARTO CLEAR2X PANEL HOLE2X PANEL HOLE
[34.29] [34.29]1.351.35
1/4" FNPT1/4" FNPT 3/8" FNPT3/8" FNPT
STYLE 1STYLE 1 STYLE 3STYLE 3STYLE 2STYLE 2 STYLE 4STYLE 4
1010
8
9
7
5
6
4
2
3
1
9
8
6
7
5
4
2
3
1
1010 1010
8
9
7
5
6
4
2
3
1
1010
9
8
7
4
5
6
3
2
1
1/2" PARFLARE1/2" PARFLARE1/4" PARFLARE1/4" PARFLARE
FLOWMETER ONLYFLOWMETER ONLYVALVE TYPEVALVE TYPE BRACKETED DIMENSIONS
ARE IN mm.
To complete model numbers above please refer to table below. Please consult factory for styles 3 and 4.
FLOW CHARACTERISTICS10
8
6
4
2
0
GR
AD
UA
TIO
N M
AR
K
FLOW RATE (cc/min)
500 1000 1500 2000 2500
FM-3-XXXXXX-2000
FM-3-XXXXXX-2500
FM-3-XXXXXX-1000
FM-3-XXXXXX-1500
0 1000 2000 3000 4000 5000
FM-3-XXXXXX-5000
FM-3-XXXXXX-3000
FM-3-XXXXXX-4000
XXXX-441101-3-MF 1 N TPNF"4/1 TPNF"4/1XXXX-661101-3-MF 1 N TPNF"8/3 TPNF"8/3XXXX-446601-3-MF 1 N eralfraP"4/1 eralfraP"4/1XXXX-666601-3-MF 1 N eralfraP"8/3 eralfraP"8/3XXXX-886601-3-MF 1 N eralfraP"2/1 eralfraP"2/1XXXX-441111-3-MF 1 Y TPNF"4/1 TPNF"4/1XXXX-661111-3-MF 1 Y TPNF"8/3 TPNF"8/3XXXX-446611-3-MF 1 Y eralfraP"4/1 eralfraP"4/1XXXX-666611-3-MF 1 Y eralfraP"8/3 eralfraP"8/3XXXX-886611-3-MF 1 Y eralfraP"2/1 eralfraP"2/1XXXX-441102-3-MF 2 N TPNF"4/1 TPNF"4/1XXXX-661102-3-MF 2 N TPNF"8/3 TPNF"8/3XXXX-446602-3-MF 2 N eralfraP"4/1 eralfraP"4/1XXXX-666602-3-MF 2 N eralfraP"8/3 eralfraP"8/3XXXX-886602-3-MF 2 N eralfraP"2/1 eralfraP"2/1XXXX-441112-3-MF 2 Y TPNF"4/1 TPNF"4/1XXXX-661112-3-MF 2 Y TPNF"8/3 TPNF"8/3XXXX-446612-3-MF 2 Y eralfraP"4/1 eralfraP"4/1XXXX-666612-3-MF 2 Y eralfraP"8/3 eralfraP"8/3XXXX-886612-3-MF 2 Y eralfraP"2/1 eralfraP"2/1
rebmuNledoM elytS evlaVeldeeN troPtelnI troPteltuO
XIFFUS EGNARWOLF0001 nim/cc000,1-0010051 nim/cc005,1-0710002 nim/cc000,2-0520052 nim/cc005,2-0030003 nim/cc000,3-0060004 nim/cc000,4-001,10005 nim/cc000,5-002,1
FM-3 Flowmeter
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
14
FeaturesPrecision machinedbellows manufacturedfrom the latesttechnology modifiedPTFE. Provides overfive times the flexurallife as compared toconventional PTFE orPFA bellows.
High bellows strokerate.
PTFE Ball check used tocycle between bellowsto provide maximumefficiency.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces pulsation andeliminates need fordampener.
Product OverviewThe Pnematic Bellows Pumps are designed for use inultra- pure water and aggressive chemical applications.The design utilizes a double bellows design to providereliable continuous or intermittent duty. The high bellowsstroke rate minimizes pulsation and provides smoothmore consistent delivery of media.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, PFANon Wetted Surfaces - Fluoroloy “A” Rod, Nitrile, PVDF Coated
6061-T6 Aluminum Trim, StainlessSteel.
Pressure Ranges:
Max Driver Supply Pressure - 60 PSIG (4.1 bar)Max Operating Pressure - 60 PSIG (4.1 bar)
Temperature Ranges:
-60° - 212° F (-51° - 100° C) Ambient
-60° - 400° F (-51° - 204° C) Fluid
PP Pneumatic Bellows Pump
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
15
K (PNEUMATIC SUPPLY)
M (PNEUMATIC SUPPLY)
C
F
D
E G
J
H
L (INLET PORT)
B
A (SQ.)
PARTEKTucson, AZ
MOUNTING HOLE PATTERN
BOTTOM PLATE
L (OUTLET PORT)
BRACKETED DIMENSIONSARE IN mm.
).ni(SNOISNEMIDA B C D E F G H J K L M
40-PP 52.3 97.3 68.0 05.3 00.3 00.2 662.Ø 88.5 94.9 A/N TPNF"4/1 TPNF"8/1
01-PP 00.4 55.4 01.1 00.4 05.3 52.2 662.Ø 88.6 43.01 A/N TPNF"8/3 TPNF"8/1
02-PP 00.5 55.5 01.1 00.4 05.3 00.3 662.Ø 93.8 60.11 TPNF"4/1 TPNF"2/1 A/N
).mm(SNOISNEMIDA B C D E F G H J K L M
55.28 72.69 48.12 09.88 02.67 08.05 67.6Ø 53.941 50.142 A/N TPNF"4/1 TPNF"8/1
06.101 75.511 49.72 06.101 09.88 51.75 67.6Ø 57.471 36.262 A/N TPNF"8/3 TPNF"8/1
00.721 79.041 49.72 06.101 09.88 02.67 67.6Ø 01.312 29.082 TPNF"4/1 TPNF"2/1 A/N
40-PP RETIL4 TPNF"4/101-PP RETIL01 TPNF"8/302-PP RETIL02 TPNF"2/1
4 LTR
FLOW RATE (lpm)
FLOW RATE (gpm)
OU
TL
ET
PR
ES
SU
RE
(p
si)
2
30
4
40
50
7.6 15.1
10 LTR
2 4 6
7.6 15.1 22.7
20 LTR
OU
TL
ET
PR
ES
SU
RE
(b
ar)
2 4 61.4
2.1
2.8
7.6 15.1 22.7
20
60
3.4
4.1
0
0
30PSI IN
35PSI IN
40PSI IN
45PSI IN
50PSI IN 30
PSI IN
35PSI IN
40PSI IN
45PSI IN
50PSI IN
30PSI IN
35PSI IN
40PSI IN
45PSI IN
50PSI IN
rebmuNledoM emuloV eziSnoitcennoCdnE
PP Pneumatic Bellows Pump
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
16
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life ascompared toconventional PTFE.
PTFE and PFA wettedsurfaces.
Tongue and groovediaphragm to body seal.
Suitable for pressure,vacuum, and dual rangeoperation.
BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.
Eliminates contamina-tion and fluid compat-ibility issues.
Assures barrier betweenoperating fluid andisolation media.
Reduces number ofdevice installations forvarying pressureranges.
SpecificationsMaterials of Construction:
Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF (all but GP-X1X-XX), HDPE( GP-X1X-XX only), EPR (Fill screw seal)
Pressure Range:
27” Hg vacuum (913 mbar) to 160 PSIG (11 bar)
Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
0° - 212° F (-17° -100° C) Ambient
0° - 400° F (-17° - 204° C) Fluid
Product OverviewThe GP Gauge Protectors are designed for use in highpurity semiconductor applications, and are also ideallysuited for use in ultra-pure water and aggressive chemi-cals. They can be fitted with customer specified, cus-tomer supplied, or factory supplied gauges. They can befilled with various customer specified liquids. Standardisolation fluid is a 50/50 mix of deionized water and Iso-propyl Alcohol.
2015
is25
p
30
10
5
GP Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
17
25
2015
sp i10
5
1520
25
30
isp10
5
30
.56 [14.22]
.56 [14.22]
1/4" MNPT
.55 [13.97]
1/4" MNPT
.55 [13.97]
1/4" PARFLARE
1/4" PARFLARE
1.15 [29.21]
1.15 [29.21]
1/4" PARBOND
1/4" PARBOND
Ø1.62 [41.22]
Ø2.11 [53.59]
1.42 [36.07]
1/4" FNPT
1/4" FNPT
1.53 [38.74]
BRACKETED DIMENSIONSARE IN mm.
STYLE 2
Above Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number. Please consult factory for otheravailable configurations or custom assemblies. All factory supplied gauges are standard brass internal construction with steelcase and glass face.
rebmuNledoMgnisuoH
elytStroP
noitarugifnoCerusserPeguaG
)GISP(rebmuNledoM
gnisuoHelytS
troPnoitarugifnoC
erusserPeguaG)GISP(
00-011-PG 1 TPNF"4/1 ENON
10-111-PG 1 TPNF"4/1 GISP03-0
20-111-PG 1 TPNF"4/1 GISP06-0
30-111-PG 1 TPNF"4/1 GISP061-0
00-031-PG 2 TPNF"4/1 ENON
10-131-PG 2 TPNF"4/1 GISP03-0
20-131-PG 2 TPNF"4/1 GISP06-0
30-131-PG 2 TPNF"4/1 GISP061-0
00-015-PG 1 TPNM"4/1 ENON
10-115-PG 1 TPNM"4/1 GISP03-0
20-115-PG 1 TPNM"4/1 GISP06-0
30-115-PG 1 TPNM"4/1 GISP061-0
00-035-PG 2 TPNM"4/1 ENON
10-135-PG 2 TPNM"4/1 GISP03-0
20-135-PG 2 TPNM"4/1 GISP06-0
30-135-PG 2 TPNM"4/1 GISP061-0
00-016-PG 1 eralfraP"4/1 ENON
10-116-PG 1 eralfraP"4/1 GISP03-0
20-116-PG 1 eralfraP"4/1 GISP06-0
30-116-PG 1 eralfraP"4/1 GISP061-0
00-036-PG 2 eralfraP"4/1 ENON
10-136-PG 2 eralfraP"4/1 GISP03-0
20-136-PG 2 eralfraP"4/1 GISP06-0
30-136-PG 2 eralfraP"4/1 GISP061-0
00-037-PG 2 dnobraP"4/1 ENON
10-137-PG 2 dnobraP"4/1 GISP03-0
20-137-PG 2 dnobraP"4/1 GISP06-0
30-137-PG 2 dnobraP"4/1 GISP061-0
GP Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
18
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life ascompared toconventional PTFE.
PTFE and PFA wettedsurfaces.
Tongue and groovediaphragm to body seal.
Suitable for pressure,vacuum, and dual rangeoperation.
BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.
Eliminates contamina-tion and fluid compat-ibility issues.
Assures barrier betweenoperating fluid andisolation media.
Reduces number ofdevice installations forvarying pressureranges.
SpecificationsMaterials of Construction:
Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF (all but GP-X1X-XX), HDPE( GP-X1X-XX only), EPR (Fill screw seal)
Pressure Range:
27” Hg vacuum (913 mbar) to 160 PSIG (11 bar)
Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consultPressure/Temperature chart on page 3.
Temperature Ranges:
0° - 212° F (-17° -100° C) Ambient
0° - 400° F (-17° - 204° C) Fluid
Product OverviewThe GPL Gauge Protectors are designed for use in highpurity Semiconductor applications, and are also ideallysuited for use in ultra-pure water and aggressive chemi-cals. The large diaphragm design offers a higher degreeof accuracy as compared to standard units. They can befitted with customer specified, customer supplied, or fac-tory supplied gauges. They can be filled with various cus-tomer specified liquids. Standard isolation fluid is a 50/50 mix of deionized water and Isopropyl Alcohol.
2015
is25
p10
5
30
GPL Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
19
2525i
2020
3030
sp5
10101515
Ø3.00 [76.20]
1.66 [42.16]
BRACKETED DIMENSIONSARE IN mm.
00-011-LPG EPDH TPNF"2/1 TPNF"2/1 ENON
30-00-011-LPG EPDH TPNF"8/3 TPNF"4/1 ENON
50-00-011-LPG EPDH TPNF"8/3 TPNF"2/1 ENON
70-00-011-LPG EPDH TPNF"4/1 TPNF"2/1 ENON
01-00-011-LPG EPDH TPNF"4/1 TPNF"4/1 ENON
00-031-LPG FDVP TPNF"4/1 TPNF"2/1 ENON
10-00-031-LPG FDVP TPNF"2/1 TPNF"2/1 ENON
01-00-031-LPG FDVP TPNF"4/1 TPNF"4/1 ENON
Please consult factory for other available configurations or custom assemblies.
rebmuNledoM lairetaMgnisuoH noitarugifnoCtroPeguaG noitarugifnoCtroPssecorP )GISP(erusserPeguaG
GPL Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
20
FeaturesOne piece precision.machined diaphragmmanufactured from the.latest technologymodified PTFE, providesover five times the flex-ural life as compared toconventional PTFE.
Modified PTFE and PFAwetted surfaces.
Tongue and groovediaphragm to body seal.
Suitable for pressure,vacuum, and dual rangeoperation.
In-line operation.
BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.
Eliminates contamina-tion and fluid compat-ibility issues.
Assures barrier betweenoperating fluid andisolation media.
Reduces number ofdevice installations forvarying pressureranges.
Reduces connectionsand entrapment areas.
SpecificationsMaterials of Construction:
Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF, EPR (Fill screw seal)
Pressure Range:
27” Hg vacuum (913 mbar) to 160 PSIG (11 bar)
Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
0° - 212° F (17° -100° C) Ambient
0° - 400° F (17° - 204° C) Fluid
Product OverviewThe GPIL In-line Gauge Protectors are designed for usein high purity Semiconductor applications, and are alsoideally suited for use in ultra-pure water and aggressivechemicals. The In-line design allows for quick cut-in in-stallation and helps prevent entrapment of fluids. Theycan be fitted with customer specified, customer supplied,or factory supplied gauges. They can be filled with vari-ous customer specified liquids. Standard isolation fluid isa 50/50 mix of deionized water and Isopropyl Alcohol.
15
25isp
30
5
10 20
GPIL In-line Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
21
STYLE 2
STYLE 1
1.23
1.89 [48.12]
3/8" PARFLARE
1.00 [25.40]
2X R .26 [6.60]
2.42 [61.58]
1/4" PARBOND
.56 [14.22]
2015
10
25
30
5
.49 [12.32]
.26 [6.60]
1.15 [29.21]
2.49 [63.26]
psi
2.19 [55.50]
1/4" PARFLARE
3/4" PARFLARE
Ø 2.11 [53.59]
1/2" PARFLARE 3/4" PARBOND1/2" PARBOND
1.49 [37.85]
1.50 [37.97]
1.37 [34.87]
1.46 [37.08]
2.12 [53.72]
2.82 [71.50]
Above Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number. Please consult factory for otheravailable configurations or custom assemblies. All factory supplied gauges are standard brass internal construction with steelcase and glass face.
BRACKETED DIMENSIONSARE IN mm.
rebmuNledoMgnisuoH
elytStroP
noitarugifnoCerusserPeguaG
)GISP(rebmuNledoM
gnisuoHelytS
troPnoitarugifnoC
erusserPeguaG)GISP(
00-4466-LIPG 1 eralfraP"4/1 ENON
10-4466-LIPG 1 eralfraP"4/1 GISP03-0
20-4466-LIPG 1 eralfraP"4/1 GISP06-0
30-4466-LIPG 1 eralfraP"4/1 GISP061-0
00-6666-LIPG 1 eralfraP"8/3 ENON
10-6666-LIPG 1 eralfraP"8/3 GISP03-0
20-6666-LIPG 1 eralfraP"8/3 GISP06-0
30-6666-LIPG 1 eralfraP"8/3 GISP061-0
00-4477-LIPG 1 dnobraP"4/1 ENON
10-4477-LIPG 1 dnobraP"4/1 GISP03-0
20-4477-LIPG 1 dnobraP"4/1 GISP06-0
30-4477-LIPG 1 dnobraP"4/1 GISP061-0
00-8866-LIPG 2 eralfraP"2/1 ENON
10-8866-LIPG 2 eralfraP"2/1 GISP03-0
20-8866-LIPG 2 eralfraP"2/1 GISP06-0
30-8866-LIPG 2 eralfraP"2/1 GISP061-0
00-212166-LIPG 2 eralfraP"4/3 ENON
10-212166-LIPG 2 eralfraP"4/3 GISP03-0
20-212166-LIPG 2 eralfraP"4/3 GISP06-0
30-212166-LIPG 2 eralfraP"4/3 GISP061-0
00-8877-LIPG 2 dnobraP"2/1 ENON
10-8877-LIPG 2 dnobraP"2/1 GISP03-0
20-8877-LIPG 2 dnobraP"2/1 GISP06-0
30-8877-LIPG 2 dnobraP"2/1 GISP061-0
00-212177-LIPG 2 dnobraP"4/3 ENON
10-212177-LIPG 2 dnobraP"4/3 GISP03-0
20-212177-LIPG 2 dnobraP"4/3 GISP06-0
30-212177-LIPG 2 dnobraP"4/3 GISP061-0
GPIL In-line Gauge Protector
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
22
FeaturesOne piece precisionmachined diaphragm/poppet manufacturedfrom the latesttechnology modifiedPTFE. Provides over fivetimes the flexural life ascompared toconventional PTFE.Wiper seat for positivethrough flow shut offand diaphragm to bodyseal.
Reversible/removablehanger.
Optional recirculationkit.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Allows hanging in eitherdirection.
Provides low deadvolume, puritymaintaining circulation.
SpecificationsMaterials of Construction:
Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF, and PET handle retention screw.Other Materials - Stainless steel spring
Pressure Ranges:
0 PSIG (0 bar) to 80 PSIG (5.5 bar)
Pressure range above is for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0° - 150° F (-17° - 66° C) Ambient
0° - 200° F (-17° - 93° C) Fluid
Product OverviewThe SG-1 DI Water Spray Gun is suitable for use in highpurity Semiconductor applications. The design utilizes amolded high purity PFA body with precision machinedsealing areas. A one piece machined modified PTFE di-aphragm/poppet provides excellent flexibility and long life.Wetted surfaces are PFA and modified PTFE thus elim-inating the need for elastomer seals. The SG-1 is avail-able with either 1/4” FNPT or 3/8” Parflare connections.Optional coiled hoses, with or without recirculation fea-ture are also available.
3 [.9]3 [.9]4 [1.2]4 [1.2]
14 [355]14 [355]18 [457]18 [457]
2 [.6]2 [.6]1 [.3]1 [.3]
0
9 [229]9 [229]7 [178]7 [178]
0.62 [16]0.62 [16]
SPRAY PATTERNSPRAY PATTERN
DISTANCE FROM HEAD (feet [meters])DISTANCE FROM HEAD (feet [meters])
SPRAY PATTERN DIAMETER (inches [mm])SPRAY PATTERN DIAMETER (inches [mm]) @ 80 psig (5.5 bar) @ 80 psig (5.5 bar)
SG-1 DI Water Spray Gun
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
23
T
KE
RAP
.520.520 [13.21] [13.21]
1/4" FNPT1/4" FNPT
3/8" PARFLARE3/8" PARFLARE
5.905.90 [149.89] [149.89]
4.664.66 [118.31] [118.31]
3.803.80 [96.52] [96.52]
.66.66 [16.64] [16.64]
2.802.80 [71.22] [71.22]
3.653.65 [92.76] [92.76]
1.231.23 [31.24] [31.24]
BRACKETED DIMENSIONSARE IN mm.
Above Parflare model numbers are supplied with PVDF nuts. Please consult factory for other available configurations or customassemblies.
rebmuNledoM noitcennoCdnE noitpircseD
0 10 20 30 40 50 60 70
.7 1.4 2.1 2.8 3.5 4.2 4.9
0.5
1.0
1.5
2.5
2.0
3.0
3.5
1.9
3.8
5.7
9.5
7.6
11.4
13.2
INLET PRESSURE VS. FLOW
FL
OW
(g
pm
)
PRESSURE (psi)
PRESSURE (bar)
FL
OW
(lp
m)
10-1-GS TPNF"4/1 ylnonuGyarpS
20-1-GS eralfraP"8/3 ylnonuGyarpS
10-20-1-GS eralfraP"8/3 ylbmessAnoitalucriceR8510-2001etelpmochtiwnuGyarpS
46G2-RTMBF A/N ylnorotcennoCeeTgnitalucriceR
8510-2001 " lioCPEF'8dna46G2-RTBMFhtiwtiKnoitalucriceRetelpmoC
1610-2001 " ylnolioCPEF'8
SG-1 DI Water Spray Gun
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
24
SG-1 Nitrogen Gun
FeaturesOne piece precisionmachined diaphragm/poppet manufacturedfrom the latesttechnology modifiedPTFE. Provides over fivetimes the flexural life ascompared toconventional PTFE.Wiper seat for positivethrough flow shut offand diaphragm to bodyseal.
Reversible/removablehanger.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Allows hanging in eitherdirection.
SpecificationsMaterials of Construction:
Interior Surfaces - PFA, Modified PTFE, (optional HDPE filterelement)External Surfaces - PFA, PVDF, and PET handle retention screw.Other Materials - Stainless steel spring
Pressure Ranges:
0 PSIG (0 bar) to 80 PSIG (5.5 bar)
Pressure range above is for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.
Temperature Ranges:
0° - 150° F (-17° - 66° C) Ambient
0° - 200° F (-17° - 93° C) Fluid
Product OverviewThe SG-1 Nitrogen Gun is suitable for use in high puritySemiconductor applications. The design utilizes a moldedhigh purity PFA body with precision machined sealingareas. Interior surfaces are PFA and a one piecemachined modified PTFE diaphragm/poppet. This designeliminates the need for elastomer seals, while providingexcellent flexibility and long life. The SG-1 is availablewith 1/4” FNPT or 3/8” Parflare connections. Additionaloptions include a .1, .2, or .5 micron filter and a coiledhose assembly.
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
25
SG-1 Nitrogen Gun
BRACKETED DIMENSIONSARE IN mm.
Above Parflare model numbers are supplied with PVDF nuts. Please consult factory for other available configurations or customassemblies.
T
KE
RAP
.520.520 [13.21] [13.21]
1/4" FNPT1/4" FNPT
3/8" PARFLARE3/8" PARFLARE
5.905.90 [149.89] [149.89]
4.664.66 [118.31] [118.31]
3.803.80 [96.52] [96.52]
.66.66 [16.64] [16.64]
3.633.63 [92.20] [92.20]
4.484.48 [113.79] [113.79]
1.231.23 [31.24] [31.24]
rebmuNledoM noitcennoCdnE noitpircseD
30-1-GS TPNF"4/1 )retliFoN(ylnonuGyarpS
40-1-GS eralfraP"8/3 )retliFoN(ylnonuGyarpS
X-30-1-GS TPNF"4/1 )tnemelEnorciM5.0ro,2.0,1.0rof5-ro,2-,1-ddA(retliFhtiwnuGyarpS
X-40-1-GS eralfraP"8/3 )tnemelEnorciM5.0ro,2.0,1.0rof5-ro,2-,1-ddA(retliFhtiwnuGyarpS
1610-2001 A/N ylnolioCPEF'8
4110-9994 " tnemelEtnemecalpeRnorciM5.0
5110-9994 " tnemelEtnemecalpeRnorciM2.0
8110-9994 " tnemelEtnemecalpeRnorciM1.0
0 10 20 30 40 50 60 70
.7 1.4 2.1 2.8 3.5 4.2 4.9
20
40
60
100
80
120
140
.6
1.1
1.7
2.8
2.3
3.4
4.0
INLET PRESSURE VS. FLOW
FL
OW
(f3 h
)
PRESSURE (psi)
PRESSURE (bar)
FL
OW
(m
3 h) 0.5 micron
0.2 micron
0.1 micron
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
26
QC-1 Quick Coupler
FeaturesNo springs in flow path.PTFE and Parofluor™wetted surfaces.
Push to connect design.
No spill design.
Standardized bodysizes.
BenefitsEliminates contaminationand fluid compatibilityissues. Contributes to alonger life and reducesmaintenance costs.
Simple to operate.
Provides safety. Easy toclean and maintain.
Allows for flexible valveconfigurations.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Parofluor™Non Wetted Surfaces - HDPE, Polypropylene, PVDF CoatedStainless Steel Springs.
Pressure Ranges:
0 to 60 PSIG (4.2 bar)
Pressure ranges above are for operation at ambienttemperatures. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
0° - 125° F (-17° - 51° C) Ambient
0° - 200° F (-17° - 93° C) Fluid
Flow Coefficient:
EZISYDOB vC vK"4/1 79. 8.31"2/1 45.3 4.05
"1 53.41 6.402.ezisydobtahtrofecifirotsegralnodesaberaseulavvC*
Product OverviewThe QC-1 Quick Coupler is designed for use in high pu-rity semiconductor applications, and is also ideally suitedfor ultra-pure water and aggressive chemical or gas ap-plications. The design utilizes only PTFE and Parofluor™components in the flow path which eliminates virtually allcontamination and provides a long life. The advanced nospill feature limits the amount of hazardous material perdisconnection which minimizes cleanup. The push to con-nect design allows for ease of operation. The quick cou-pler is available in 1/4”, 3/8”, 1/2”, 3/4” and 1” end con-nections. The quick coupler is an excellent choice forsafe, non-spill connection and disconnection fluid han-dling systems.
NIPPLE COUPLER
CONNECTED
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
27
QC-1 Quick CouplerAB
C
E F
G
D
BF
H
NIPPLE COUPLER CONNECTED
MAX PANELTHICKNESS
).ni(SNOISNEMID (SNOISNEMID mm ).A B C D E F G H A B C D E F G H
X441-1-CQ 77.2 04. Ø 04.1 36. 49.2 05. Ø 00.2 37.4 63.07 61.01 65.53Ø 00.61 86.47 07.21 08.05Ø 41.021
X446-1-CQ 77.2 51.1 04.1Ø 36. 49.2 51.1 00.2Ø 37.4 63.07 12.92 65.53Ø 00.61 86.47 12.92 08.05Ø 41.021
X466-1-CQ 77.2 32.1 04.1Ø 36. 49.2 32.1 00.2Ø 37.4 63.07 42.13 65.53Ø 00.61 86.47 42.13 08.05Ø 41.021
X881-1-CQ 30.3 36. 51.2Ø 05. 92.3 36. 54.2Ø 61.5 69.67 00.61 16.45Ø 07.21 75.38 00.61 32.26Ø 60.131
X886-1-CQ 30.3 53.1 51.2Ø 05. 92.3 53.1 54.2Ø 61.5 69.67 92.43 16.45Ø 07.21 75.38 92.43 32.26Ø 60.131
X8216-1-CQ 30.3 64.1 51.2Ø 05. 92.3 64.1 54.2Ø 61.5 69.67 80.73 16.45Ø 07.21 75.38 80.73 32.26Ø 60.131
X61211-1-CQ 01.4 56. 58.2Ø 88. 32.4 24. 57.3Ø 27.6 41.401 15.61 93.27Ø 53.22 44.701 76.01 52.59Ø 96.071
X61216-1-CQ 01.4 64.1 58.2Ø 88. 32.4 64.1 57.3Ø 27.6 41.401 80.73 93.27Ø 53.22 44.701 80.73 52.59Ø 96.071
X61611-1-CQ 01.4 87. 58.2Ø 88. 32.4 07. 57.3Ø 27.6 41.401 18.91 93.27Ø 53.22 44.701 87.71 52.59Ø 96.071
X61616-1-CQ 01.4 08.1 58.2Ø 88. 32.4 08.1 57.3Ø 27.6 41.401 27.54 93.27Ø 53.22 44.701 27.54 52.59Ø 96.071
)eziSydoB"1(01-4/33,)eziSydoB"2/1(8-4/31,)eziSydoB"4/1(01-4/11-raelCoteloHlenaP*
rebmuNledoM epyTnoitcennoCdnE eziSnoitcennoCdnE eziSydoB epyTgnilpuoC
N441-1-CQ TPNF "4/1 "4/1 elppiN
C441-1-CQ TPNF "4/1 "4/1 relpuoC
N446-1-CQ eralfraP "4/1 "4/1 elppiN
C446-1-CQ eralfraP "4/1 "4/1 relpuoC
N466-1-CQ eralfraP "8/3 "4/1 elppiN
C466-1-CQ eralfraP "8/3 "4/1 relpuoC
N881-1-CQ TPNF "2/1 "2/1 elppiN
C881-1-CQ TPNF "2/1 "2/1 relpuoC
N886-1-CQ eralfraP "2/1 "2/1 elppiN
C886-1-CQ eralfraP "2/1 "2/1 relpuoC
N8216-1-CQ eralfraP "4/3 "2/1 elppiN
C8216-1-CQ eralfraP "4/3 "2/1 relpuoC
N61211-1-CQ TPNF "4/3 "1 elppiN
C61211-1-CQ TPNF "4/3 "1 relpuoC
N61216-1-CQ eralfraP "4/3 "1 elppiN
C61216-1-CQ eralfraP "4/3 "1 relpuoC
N61611-1-CQ TPNF "1 "1 elppiN
C61611-1-CQ TPNF "1 "1 relpuoC
N61616-1-CQ eralfraP "1 "1 elppiN
C61616-1-CQ eralfraP "1 "1 relpuoC
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
28
VV Venturi/Vacuum Generator
Product OverviewThe Venturi/Vacuum Generator is designed for corrosiveor high purity gas applications. The design consists oftwo machined high purity PTFE body halves attachedusing a tongue and groove sealing mechanism. Theconcept of a venturi valve is a short tube with a taperedconstriction in the middle that causes an increase in thevelocity of flow of a fluid and a corresponding decreasein fluid pressure. This is used in measuring flow or forcreating a suction. The lack of moving parts eliminatesthe possibility of media contamination.
FeaturesIntegral nozzle on inletbody half.
PTFE wetted surfaces.
BenefitsEliminates the need forcalibration andrealignment.
Eliminatescontamination and fluidcompatibility issues.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFENon Wetted Surfaces - PVDF, 18-8 stainless steel
Pressure Ranges:
0 to 120 PSIG (8.2 bar)
Pressure ranges above are for operation at ambienttemperatures. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
0° - 150° F (-17° - 66° C) Ambient
0° - 266° F (-17° - 130° C) Fluid
Motive Fluid:
Clean Dry Air, N2 or any other available gas
Motive Consumption (Air):
At 40 PSIG: 1.60 SCFMAt 60 PSIG: 1.75 SCFMAt 80 PSIG: 1.80 SCFM
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
29
VV Venturi/Vacuum GeneratorBRACKETED DIMENSIONS
ARE IN mm.
SUCTION PRESSURE VS. FLOW RATE
FLOW RATE (SCFH)
PR
ES
SU
RE
(In
ces
Hg
)
0 40
20
80
15
120
10
160
5
0
Motive Pressure = 40 psi
Motive Pressure = 60 psi
Motive Pressure = 80 psi
25
Please consult factory for other available configurations or custom assemblies.
VV-041020204
2X 0.38 [9.65]
3.18 [ 80.77]
1.38 [35.05]
0.50 [12.70]
2.23 [56.64]
VV-046040606
1.15 [29.21]
3.41 [86.60]
2X 1.23 [31.24]
FNPT2X 1/8"
1/4"1/4"PARFLARE
2X 3/8"PARFLARE
rebmuNledoM ecifirO noitarugifnoCwolF troPtelnI troPmuucaV troPteltuO
402020140-VV 060. FFO/NO TPNF"8/1 TPNF"8/1 TPNF"4/1
606040640-VV 060. " eralfraP"4/1 eralfraP"8/3 eralfraP"8/3
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
30
K-Max Stream Switching Valve
FeaturesSurface mount design.
Modular valve design.
Visual positionindication.
Low actuation pressure.
Captured vent.
Dual acting, normallyopen and normallyclosed configurations.
GC Module.
BenefitsAllows user tomaintenance systemwithout breakingprocess line.
Ease of additionalstreams withoutdisrupting installedunits.
Provides system safety.
Minimizes pneumaticdemands on system.
Prevents crosscontamination ofprocess and air signal,while giving the user anindication of systemintegrity problems.
Will work in any systemsetup withoutreplumbing.
Equilibrates the sampleloop pressure toatmospheric just prior tosample injection.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Parofluor™ O-RingsExternal Surfaces - PVDF, PTFE, 18-8 stainless steel, Viton
seals, PVDF coated stainless steelsprings.
Pressure Ranges:
-5 PSIG (-.34 bar) to 50 PSIG (3.4 bar)Actuator Pressure: 40 PSIG (2.8 bar) to 60 PSIG (4.2 bar)
Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
0° - 150° F (-17° - 66° C) Ambient
0° - 150° F (-17° - 66° C) Fluid
Product OverviewThe K-Max Stream Switching Valve is designed to beused in analytical systems. The design utilizes state-of-the-art surface mount technology to reduce leak paths,internal volume and dead volume. The design allowsfor both stream switching and internal loop filtering inone assembly. In addition, the unique nested assemblydesign allows for the addition of new streams and main-tenance on existing streams without breaking any pro-cess lines.
SAMPLE
END BLOCK
VENT
VENT
VENT BLOCK
VENT
VENT
ACTUATIONAIR
STREAM 2
ACTUATIONAIR
STREAM 3
ACTUATIONAIR
STREAM 1
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
31
K-Max Stream Switching Valve
1.261.26
.62.62
2X2X.63.63
1.131.13
3.773.77
4.114.11
OUTLETOUTLET RETURNRETURN
.80.80
.62.62
.78.78
1.001.00
1.271.27
1.151.15
.75.75
2X2X3.403.40
1.001.00
1.801.80
1.001.00
2X 2.652X 2.65
3.053.05
2X .202X .20 2X .202X .20
.67.67
.97.97
1.531.53
3X3X.62.62
CA
PT
UR
ED
CA
PT
UR
ED
VE
NT
VE
NT
AIR
AIR
OP
EN
OP
EN
AIR
AIR
CLO
SE
CLO
SE
INLE
TIN
LET
VE
NT
VE
NT
VE
NT
VE
NT
rebmuNledoM noitarugifnoCtroP *snoitpOlaeS noitautcA **smaertSfo.oN
XXXXXX-111-MK eralfraP"4/1 notiV-detteWnoN/™roulforaP-detteW gnitcAelbuoD 6ot1
XXXXXX-211-MK eralfraP"4/1 notiV-detteWnoN/™roulforaP-detteW desolCyllamroN 6ot1
XXXXXX-311-MK eralfraP"4/1 notiV-detteWnoN/™roulforaP-detteW nepOyllamroN 6ot1
XXXXXX-112-MK pirgraP"4/1 notiV-detteWnoN/™roulforaP-detteW gnitcAelbuoD 6ot1
XXXXXX-212-MK pirgraP"4/1 notiV-detteWnoN/™roulforaP-detteW desolCyllamroN 6ot1
XXXXXX-312-MK pirgraP"4/1 notiV-detteWnoN/™roulforaP-detteW nepOyllamroN 6ot1
XXXXXX-113-MK TPNF"4/1 notiV-detteWnoN/™roulforaP-detteW gnitcAelbuoD 6ot1
XXXXXX-213-MK TPNF"4/1 notiV-detteWnoN/™roulforaP-detteW desolCyllamroN 6ot1
XXXXXX-313-MK TPNF"4/1 notiV-detteWnoN/™roulforaP-detteW nepOyllamroN 6ot1
Above Pargrip model numbers are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts, add -Tas the final suffix to the model number (i.e. KM-112-111000-T). Please consult factory for other available configurations orcustom assemblies.
* For all Parofluor o-rings, change second number to “2” (i.e. KM-321-111000).** All six digits must be used in part number from left to right. For example, part KM-111-111200 designates a K-Max Valve with1/4” Parflare port configurations, Wetted-Parofluor™/Non Wetted-Viton seal option, double acting actuation, and 3 standardstreams/1 GC module.
“0” designates no stream at that location“1” designates standard stream“2” designates GC module
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
32
KMF Filter
FeaturesBypass loop.
Low profile.
PTFE and Parofluor™wetted surfaces
Hydrophobic coalescentfilter membrane.
BenefitsAllows for recirculationwithout filtration.
Reduces space andoverall cost.
Eliminates fluidcompatibility issues.
Provides purity byremoving particulatesand moisture.
SpecificationsMaterials of Construction:
Wetted Surfaces - PTFE, Parofluor™ O-RingsExternal Surfaces - PVDF, PTFE.
Pressure Ranges:
-5 (.34 bar) to 50 PSIG (3.4 bar)
Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.
Temperature Ranges:
-60° - 150° F (-51° - 66° C) Ambient
-60° - 150° F (-51° - 66° C) Fluid
Product OverviewThe KMF Filter is designed for use in analytical systems.It is ideally suited for aggressive chemical and gasapplications. The design utilizes a high purity PTFE bodywith precision machined features and a PTFE filterelement. It is used in conjunction with the Partek K-MaxStream Switching Valve to quickly recirculate media oras a standard in-line filter. The hydrophobic fitlermembrande allows gas to pass while eliminatingcontaminants and moisture from sample.
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
33
KMF Filter
DE
LTA
-P (
psi
)
0
50
10
40
30
20
DE
LTA
-P (
bar
)
3.5
2.8
2.1
1.4
.7
FLOW RATE (lpm)PRESSURE DROP VS. FLOW RATE
.95 1.9 2.8 3.8 4.7
FLOW RATE (gpm)0.25 0.50 0.75 1.00 1.25
rebmuNledoM CV KV tnemelEretliF noitcennoCdnE
For replacement elements, order 5004-0001 for 5 microns and 5004-0009 for 20 microns.
11-FMK 2. 1.4 norciM5 eralfraP"4/1
21-FMK 2. 1.4 norciM02 "
12-FMK 2. 1.4 norciM5 pirgraP"4/1
22-FMK 2. 1.4 norciM02 "
3X 1/4" PARFLARE3X 1/4" PARFLARE
Ø2.392.39INLETINLET
BYPASSBYPASS
OUTLETOUTLET
4X 4X Ø.21 THRU.21 THRU
.88.881.701.70
1.851.851.551.55
2X2X1.001.00
2X2X.40.40
.50.50
5.305.30
3.003.00
1.111.11HEXHEX
2.502.50
2X2X.25.25
2X .202X .20
1.301.30
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
34
OverviewPartek will design custom assemblies for all your applications. Partek has a state of the art facility with dedicated,expert personnel that are focused on your design and creating a solution to your needs. All of the products passthrough Partek Engineering and customer approval process before being manufactured, assembled and 100% leaktested at our ISO 9001 UHP Facility. These include, but are not limited to, such products as:
• Manifolds• Welded Assemblies• Surface Mounts• Valve Assemblies• Special Customer Components• Miscellaneous Assemblies
We focus on fluorinated polymer flow control products for use in fluid systems where corrosion resistance or highpurity is required. Materials we can manufacture your specialty product from include, but are not limited to, PTFE,Modified PTFE, PFA, FEP, PVDF, and ETFE.
Partek has over 20 years of experience in fabricating products used in applications including semiconductormanufacturing; chemical, food, and pharmaceutical processing; and biomedical and analytical instrumentation.Whatever your specialty applications needs are, Partek can provide it.
Design and Assembly Process
Defining Your NeedsThrough thorough analysis and review, Partek will provide your custom assembly in a timely manner. Based on theanalysis, our expert engineers will create your design to meet your product’s specific application. Armed with thelatest CAD technology, your design will include drafting, layouts, 2-dimensional and 3-dimensional drawings.Partek is committed to working closely with you to develop your concepts into a solution that will exceed all yourspecialty needs.
Quotation and ApprovalPartek will provide a quotation for your approval. The quotation will be submitted with detailed drawings for yourreview, and will also contain our price, delivery time, testing, packaging and prototype (if required).
AssemblyUpon receipt of your signed approval and purchase order, we will manufacture and assemble your custom productin a controlled environment. Our experienced lab technicians will assemble your product to your exact specifica-tions within the required lead time.
SolutionThe product you needed is ready for shipment. Remember, from your initial concepts to the delivery of yourapplication specific product, Partek ensures only the highest quality materials and workmanship in designing andmanufacturing your specialty products.
Specialty and Custom
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
35
ManifoldsEngineered manifolds combine valves and fittings onto one larger PTFE block. Due to thecontinuous need to reduce space in chemical cabinet environments, you will benefit from:• Reduction in size to the absolute minimum.• Reduction in the quantity of connections.• Fits directly into a given space for minimum assembly time.
Weld AssembliesThe use of Parbond fittings and PFA pipe provides for the most permanent and leakproofconnection available on the market today. Utilizing state of the art fusion welding equip-ment, Partek/Atlantic can assemble a drop in unit for all permanent applications.• Significantly reduces assembly time in the field.• Small assemblies eliminate connections.• Allows customers to modify and improve system efficiency.
Surface MountsIndividual bottom ported valves mounted to a substrate is a growing trend. We manu-facture modular components of various sizes, Cv rates and orientations along withcustom single and multi-station subbases of many diverse flow patterns.• Assembly adaptability in the field due to modular components and blocking plates.• Significantly reduces space and number of connections.• Reduces repair costs with modular components.
Valve AssembliesStandard and/or nonstandard valves coupled together to develop a custom productfor all types of specialty applications. These are constructed, mounted and tested in acomplete drop-in configuration to reduce OEM and MRO assembly, repair time, andtotal fitting connections.• Provides a solution for unique flow applications.• Reduces space to a minimum.• Partek takes a value added approach when engineering these assemblies.
E
SO
LC
S
E
LC
O
WO
FL
PA
RT
EK
O
N
PE
N
EP
O
S
E
CL
O
EK
R
R
PA
PA
RT
EK
OF
LW
OP
E
N
NO
AZ.
,
RG
/1
P"4
A
PI
A
PF
R
PRA
EK
T
TU
CS
R
P
KR A
E
R
A
I
A4"
P
1/
GR
FP
P
,
. Z A
ONR
T
KE
A RP
ARK
P
E SC
UT
E ESACR
IN
DECRAEES
TU
CS
ON
, AZ
NEOPPENO
R
FP
A
IP
A4"
P
1/
GR
,O
. Z A
NR
SC
UT
K
TA R
P
E
ARK
P
E
A4
PR
R
FP
A
IP
1/
G
"
. A , NZ
O
CT
U
S
T
EK
P A R
EEACR
INS
TU
CS
ON
, AZ
DCRAEES
E
PO EN
Special Customer ComponentsSpecially designed components not in the scope of Partek/Atlantic’s standard productline, but the need falls within our manufacturing, machining and molding capabilities tofulfill the customer’s requests. Designated with a CPRT number for internal identificationpurposes.• Solves specific and critical customer applications.• Value added engineering and service.
Miscellaneous AssembliesYour application is our challenge.
Specialty and Custom
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
36
Notes
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
37
Notes
Parker Hannifin CorporationPartek/AtlanticTucson, AZ
38
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.
9/91-P
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.
Offer of Sale
Parker’Parker’Parker’Parker’Parker’s Chars Chars Chars Chars CharterterterterterTo be a leading worldwide manufacturer of compo-nents and systems for the builders and users of durablegoods. More specifically, we will design, market andmanufacture products controlling motion, flow and pres-sure. We will achieve profitable growth through premiercustomer service.
PrPrPrPrProduct Inforoduct Inforoduct Inforoduct Inforoduct InformationmationmationmationmationNorth American customers seeking product information,the location of a nearby distributor, or repair serviceswill receive prompt attention by calling the ParkerProduct Information Center at our toll-freenumber: 1-800-C-PARKER (1-800-272-7537). InEurope, call 00800-C-PARKER-H (00800-2727-5374).
The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.
The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-raulic components and sys-tems to builders and users ofindustrial and mobile machin-ery and equipment.
The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.
The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.
The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.
The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.
About Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationParker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice. A Fortune 500 corporation listed on the NewYork Stock Exchange (PH), our components and sys-tems comprise over 1,400 product lines that controlmotion in some 1,000 industrial and aerospace mar-kets. Parker is the only manufacturer to offer itscustomers a choice of hydraulic, pneumatic, andelectromechanical motion-control solutions. Our Com-pany has the largest distribution network in its field,with over 7,500 distributors serving nearly 400,000 cus-tomers worldwide.
Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com
Parker Hannifin Corporation
The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomer service.
The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial custom-ers worldwide.
TM
Parker Hannifin CorporationPartek/Atlantic7075 East Southpoint RoadTucson, AZ 85706 USATel: (520) 574-2600Fax: (520) 574-2700Web site: http://www.parker.com/partek
Catalog 418304/03