Paper Art - Yamaha Yzr m1 Us Assembly

8/2/2019 Paper Art - Yamaha Yzr m1 Us Assembly

1/14

Thank you for downloading the "YZR-M1 50th Anniversary US edition"

paper craft model. By simply following this manual while referring to the

names and numbers shown on the parts sheets, you can assemble an

authentic-looking replica of the YZR-M1 50th Anniversary US edition


2/14

Tools and materials neededBasic working method and markings

Items of Caution

One - point Advice

*Cut carefully with cutting blade, Exacto-knife or

scissors.

*As an adhesive, white wood glue is recommended.

*For folding parts, first use an awl or other pointedtool to make a light crease along the dotted or solid

line. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

-Ruler - scissors - blade cutter or "Exacto-knife" - awl orother pointed tool (for making a folding crease) - felt pen

- pin set - glue - hand towel ( for cleaning your fingers) -

dictionary or other heavy book ( to press the papers flat).

*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size. There

may be differences in dimensions, depending on the

type of printer used.

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,

Exacto-knife or scissors.

Fold along these lines.

The printed surface should be

on the outside of the folded shape.

Solid lines

Fold along these lines.

The printed surface should be

on the inside of the folded shape.

Broken lines

Cut along these lines.

Dotted line

Do not fold or cut the parts

marked .

Cut out parts marked with an

asterisk(*).

2

1To begin

How to assemble


3/14

First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.

1 Assembling the Front Cowl

Front CowlSheet A, 3 parts in total

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Indication of

Working Methods Fold or Curve Glue

A--2

A--3

A--1

Reference photo


4/14


SteeringSheet B, 16 parts in total



Indication of


2 Assembling the Steering

[ Upper Steering Column ]

[ Lower Steering Column ]*DO NOT glue the upper and the lower parts

of the steering column at this stage.

B--166B--155

B--144

B--5

B--133

B--1B--2 B--4

B--6B--100

B--8

B--7

B--3B--111

B--9

Reference photo


5/14


Fuel TankSheet C, 2 parts in total



Indication of


3 Assembling the Fuel Tank & Exhaust Pipes

Exhaust PipesSheet D, 6 parts in total



D--1

C--1

C--2

D--5D--4D--6

Reference photo


6/14


Rear FenderSheet E, 14 parts in total



Indication of


4 Assembling the Rear Fender

E--1

E--3 E--4

14

E--7E--6

E--5

E--111

E--122

E--133

E--2

E--100


7/14


Under CowlSheet F, 10 parts in total



Indication of


5 Assembling the Under Cowl

F--1

F--3

F--5F--2

F--6

F--8

F--100 F--7F--9

F--4


8/14


FrameSheet G, 21 parts in total



Indication of


6 Assembling the Frame

G--1

G--166

G--188

G--199

G--177

G--2

G--155

G--133 G--8G--6

G--100

G--200

G--144

G--211

G--4

G--7

G--3

G--111

G--122

G--5

G--9


9/14


Rear ArmSheet H, 11 parts in total



Indication of


7 Assembling the Rear Arm

H--9

H--2

H--111

H--100

H--6

H

H--3

H--4

H--8

H--7

H--1

*Do not glue Parts H-3 to H-4at this stage.


10/14


Front TireSheet I, 14 parts in total



Indication of


8 Assembling the Front Tire

*Glue the completed front wheel to the assembled front tire.

Front wheel

Front Tire

I--122I--144

I--5

I--133

I--111I--4

I--2I--3

I--6

I--7

Reference photo


11/14


Rear TireSheet J, 12 parts in total



Indication of


9 Assembling the Rear Tire

*Glue the completed rear wheel to the assembled rear tire.

J--100J--122

J--3

J--111

J--9J--2

J--1

J--4

J--5

Rear Tire

Rear wheel

Reference photo


12/14

12

10 Finish

12

4

5

5

8

9

11

6

7

12

12

8

10

103

2

3

4

5

6

7

8

9

10

11

12

1

Assembly Instructions

glue the assembled parts in numerical

order through .

Glue the Rear Tire to the Rear Arm.

Glue the Rear Arm to the Frame.

Glue H-3 to H-4.

Glue H-3 to the Frame.

Glue the Rear Fender to the Fuel Tank.

Glue the Fuel Tank to the Frame.

Glue the Under Cowl to the Front Cowl.

Glue the Under Cowl to the Frame.

Glue the upper part of the Steering to the Frame.

Glue the lower part of the Steering to the upper part of the Steering and the Frame.

Glue the Front Tire to the lower part of the Steering.

Finish by gluing the Exhaust to the Rear Arm and the Rear Fender.

H-3

Front Cowl

Lower Steering Column

Front Tire

Rear Fender

Exhaust Pipes

Fuel Tank

Under Cowl

Rear Arm

Rear Tire

Frame

H-4

Upper Steering Column


121


13/14

13

FRONTRIGHT

11 Assembled Model and the List of Parts

Please refer to the photo below when attaching each component.

B--1B--2B--3B--4B--5

B--6B--7B--8B--9B--100

B--111B--122B--133B--144B--155

B--166

E--1E--2E--3E--4E--5

E--6E--7E--8E--9E--100

E--111E--122E--133E--144

D--1D--2D--3D--4D--5

D--6

C--1C--2

A--1A--2A--3

Rear Fender Fuel Tank Front Cowl

Exhaust Pipes

I--1I--2I--3I--4I--5

I--6I--7I--8I--9I--100

I--111I--122I--133I--144

Front TireSteering


14/14

14

12 Assembled Model and the List of Parts

Please refer to the photo below when attaching each component.

REARLEFTG--1G--2G--3G--4G--5

G--6G--7G--8G--9G--100

G--111G--122G--133G--144G--155

G--166G--177G--188G--199G--200

G--211Frame

J--1J--2J--3J--4J--5

J--6J--7J--8J--9J--100

J--111J--122

Rear Tire

H--1H--2H--3H--4H--5

H--6H--7H--8H--9H--100

H--111Rear Arm

F--1F--2F--3F--4F--5

F--6F--7F--8F--9F--100

Under Cowl

Paper Art - Yamaha Yzr m1 Us Assembly

Documents

Transcript of Paper Art - Yamaha Yzr m1 Us Assembly