Blue wire : Connect NeutralBrown wire : Connect Live

LED Panel Light Installation Manual

3.

2.

Appearance design : Light weight, easy for install, scientific thermal and optical design, perfect heat dissipation, with high quality aluminium heat sink.

LED light source : High brightness, stabilized performance, low luminous decay, long life span.

Optical design : The unique anti-glare design solution, with uniform light output, avoids glare.

External LED driver : High PF external LED driver, safe, energy-saving, convenient and long life span.

Health and Environment protection : Excludes mercury, lead and other harmful substances, no pollution to environment, the material is recyclable, no UV, no flicker, eyes protection, no noise to ensure silent operation.

Product Dimension : Input Voltage : Power Factor : IP Grade : Work Temperature :

Watts : Lumens : Kelvins :

595 x 595mm200 - 240Vac 50/ 60Hz0.9IP20 20

40W4000 lu5000K

4. 1. Prior to any electrical work, isolate the electrical supply and check it dead!2. Check all parts present prior to commencing work.3. Do not install or use in wet / damp conditions. 4.This fitting should be installed by a qualified electrician to the latest IEE Regulations, British Standards and Building Regulations.

A.1.Remove the existing tile.2. Connect the mains supply to the power supply unit provided, ensuring colour codes and polarity are followed correctly.3. Fit the power supply to the light panel using the fitted plug / socket.4. Fit the light into the ceiling.5. Turn on the electrical supply and test fitting works correctly.

1. Fix the support onto the ceiling or wall.2. Connect the mains supply to the power supply unit provided, ensuring colour codes and polarity are followed correctly.3. Fit the power supply to the light panel using the fitted plug / socket.4. Fix the panel to the ceiling supports.5. Turn on the electrical supply and test fitting works correctly.

5.

1. Never Start work until the electricity supply is isolated and checked dead. 2. Do not cover fitting or power supply with insulation material. 3. Both the light fitting and the power supply are sealed units and have no repairable / replaceable parts. 4. Never use any part which shows any sign(s) of damage. 5. Never connect / disconnect the power supply to / from the light when the supply is on. Care and maintenance 1. Always isolate the electrical supply and check it dead, prior to any maintenance or repair work. 2. The face of this product can be cleaned wih a lightly dampened cloth. No chemicals should be use.

1. Take off the clamp and install the tapping screw into this clamp ( Picture 1 ) 2. Fix the clamps onto the ceiling (Picture 2)3. Lock the clamp wire into the clamps (Picture 3)4. Adjust the length of steel wires, connect power supply wires. (Picture 4)5. Switch on and test working correctly.

www.justled.co

600 x 600 LED Panel Light Please read the instruction manual before use

Product features

Technical Data

Installation

Tile replacement method

1. Application: Domestic, Commercial and Industrial useB. Flush mounting method ( Optional extra )

C. Hooked type method ( Optional extra )

Connection

6. Safety