panasonic cf-48 sm

- 1 -

ORDER NO. CPD0010002C0

CF-48Notebook Computer

© 2000 Matsushita Electric Industrial Co., Ltd.All rights reserved. Unauthorized copying anddistribution is a violation of law.

Model Number Reference

This is the Service Manual forthe following areas.

M ...for U.S.A. and Canada

E ...for U.K.

G ...for Germany

F ...for France

S ...for Sweden

T ...for Italy

P ...for Spain

The models in the CF-48 series are numbered in accordance with the types of the CPU, LCDand HDD etc. featured by the product.

WARNINGThis service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not containwarnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricityshould be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with inthis service information by anyone else could result in serious injury or death.

Model No.CF-48 A

LCD type3: for 13.3" TFT Color4: for 14.1" TFT Color

HDD type / RAM sizeA: 10 GB / 64 MBF: 20 GB / 128 MB

AreaM: for U.S.A. and CanadaE: for U.K.G: for GermanyF: for FranceS: for SwedenT: for Italy

DriveA: FloppyDisk drive / CD-ROM driveB: FloppyDisk drive / DVD-ROM drive

CPU typeM: for Intel Mobile Pentium III

Processor 600 MHzN: for Intel Mobile Pentium III

Processor 700 MHz

Operating SystemC: Microsoft Windows NTD: Microsoft Windows 2000E: Microsoft Windows 98

- 2 -

WARNINGSFor U.K.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLYThis appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 3 amp fuse is fitted in this plug.Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3

amps and that it is approved by ASTA or BSI to BS 1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse isreplaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.A replacement fuse cover can be purchased from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR

HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSEDOF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTEDINTO ANY 13 AMP SOCKET.

If a new plug is to be fitted please observe the wiring code as shown below.

If in any doubt please consult a qualified electrician.Important

The wires in this mains lead are coloured in accordance with the following code:Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal which is marked withthe letter N or coloured BLACK.The wire which is coloured Brown must be connected to the terminal which is markedwith the letter L or coloured RED.Under no circumstances should either of these wires be connected to the earth terminal of the

three pin plug, marked with the letter E or the Earth Symbol .

The mains plug on this equipment must be used to disconnect the mains power.Please ensure that a socket outlet is available near the equipment and shall be easilyaccessible.

How to replace the fuseOpen the fuse compartment with a screw

driver and replace the fuse.

Warnings

This equipment is not designed for connection to an IT power system.(An IT system is a system having no direct connections between live parts and Earth; the exposedconducive parts of the electrical installation are earthed.

An IT system is not permitted where the computer is directly connected to public supply systems in the

U.K.)

Disconnect the mains plug from the supply socket when the computer is not in use.

This equipment is produced to BS800/1983.

A S A

- 3 -

LASER SAFETY INFORMATIONFor U.S.A.

Class 1 LASER-Product

This product is certified to comply with DHHS Rules 21 CFR Subchapter J.This product complies with European Standard EN60825 (or IEC Publication 825)

For all areasThis equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.

Caution:(1) Use of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.(2) The drive is designed to be incorporated into a computer-based system or unit which has an enclosing cover.

It should never be used as a stand alone drive.

Danger:The serviceman should not remove the cover of drive unit and should not service because the drive unit is a non-serviceable part.Please check DANGER label on PD-drive unit.

• Unplug the AC power cord to the equipment before opening the top cover of the drive. • When the power switch it on, do not place your eyes close to the front panel door to look into the interior of the unit.

LASER Specification

Class 1 level LASER ProductWave Length: DVD 658±8 nm

CD 775~815 nm

Laser safety information is appropriate only when drive with laser is installed.

• CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type recommended by the equipment manufacture.Discard used batteries according to the manufacturer's instructions.

Vorsicht!Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben order einen vomHersteller empfohlenen ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

LITHIUMBATTERIES

ATTENTION: IL Y A DANGER D'EXPLOSION S' IL Y A REMPLACEMENT INCORRECT DE LA PILE.REMPLACER UNIQUEMENT AVEC UNE PILE DU MÈME TYPE OU D'UN TYPE RECOMMANDÉ PAR LECONSTRUCTEUR. METTRE AU RÉBUT LES PILES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DUFABRICANT.

PILE AU LITHIUM

LITHIUM BATTERY

- 4 -

CONTENTS

1. Specificayions .......................................................................................................... 1-1~1-22. Names and Functions of Parts ............................................................................... 2-1, 2-23. Technical Information .............................................................................................. 3-1~3-4

3.1 System Overview .................................................................................................................. 3-1, 3-23.2 System Memory Map ............................................................................................................ 3-33.3 I/O Address Map ................................................................................................................... 3-4

4. Diagnosis Procedure ............................................................................................... 4-1~4-124.1 Basic Procedures .................................................................................................................. 4-14.2 Power On Self Test ................................................................................................................ 4-24.3 List of Error Codes ................................................................................................................ 4-3, 4-44.4 Diagnosis Map ...................................................................................................................... 4-5~4-12

5. Diagnosis Test .......................................................................................................... 5-1~5-165.1 Diagnostic Test Procedure .................................................................................................... 5-1~5-10

5.2 Error Message ...................................................................................................................... 5-11~5-16

6. Disassembly/Reassembly ....................................................................................... 6-1~6.1 Removing the Battery Park ................................................................................................... 6-16.2 Removing the HDD Unit ........................................................................................................ 6-16.3 Removing the RAM Cord and the RTC Battery ..................................................................... 6-26.4 Removing the MINI-PCI Modem Card................................................................................... 6-26.5 Removing the CD-ROM Drive ............................................................................................... 6-26.6 Removing the Center Cover .................................................................................................. 6-36.7 Removing the Keyboard ........................................................................................................ 6-36.8 Removing the Top Shild Plate ............................................................................................... 6-46.9 Removing the LCD Unit ........................................................................................................ 6-46.10 Removing the SuperDisk Drive or the FloppyDisk Drive ....................................................... 6-46.11 Removing the Top Cabinet and Sub PCB Angle ................................................................... 6-56.12 Removing the IF PCB ........................................................................................................... 6-56.13 Removing the LED PCB, MAIN PCB, VGA/CPU Heat Sink, Fan,

I/O Plate and COM PCB ....................................................................................................... 6-66.14 Removing the LCD ................................................................................................................ 6-76.15 Removing the PAD PCB ........................................................................................................ 6-86.16 Removing the Speaker .......................................................................................................... 6-86.17 Removing the IC Card Cover and the Port Replicator Cover ................................................ 6-96.18 Removing the HDD ............................................................................................................... 6-96.19 Removing the FDD................................................................................................................ 6-96.20 Removing the CD-ROM Drive or the DVD-ROM Drive .......................................................... 6-9

7. Wiring Connection Diagram ................................................................................... 7-18. Exploded Views ........................................................................................................ 8-1~8-49. Replacement Parts List ........................................................................................... 9-1~9-12

1 - 1

1. Specifications

Main Specifications

*1 A 16 M color display is achieved by using the dithering function.*2 1GB = 109 bytes

This page provides the specifications for the model CF-48xxxxAxx. The model number will change depending on the configuration of the unit, such as, CPU speed, memory size, HDD size, Operating System, LCD type, and whether a CD-ROM drive, a SuperDisk drive, a DVD-ROM drive, or a LAN card is included or not.

To check the model number:Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed:Use DMI Viewer in [Start] - [Programs] - [Panasonic] - [DMI Viewer].

To check memory and the Hard Disk Drive (HDD) size:Access the HDD’s “Properties” to check its capacity.1. Run the Setup Utility.2. The memory size is confirmed in [System Memory] of the [Main] menu. The hard disk drive size is confirmed in

[Primary Master] of the [Main] menu.

Model No.

CPU

Memory (Expandable to)

Video Memory

LCD Type

Displayed Colors*1

Hard Disk Drive

Operating System

CF-48xxxxAxx

Mobile Pentium® III Processor600 MHz featuring Intel® SpeedStepTM Technology (CF-48Mxxxxxx)700 MHz featuring Intel® SpeedStepTM Technology (CF-48Nxxxxxx)L1 Cache Memory: 32 KBL2 (Second) Cache Memory: 256 KB

64 128MB (384 MB Max.) (for CF-48xxFxxxx)

14.1" type (TFT) (for CF-48x4xxxxx)

20 GB*2 (for CF-48xxFxxxx)

MB (320 MB Max.) (for CF-48xxAxxxx)

8 MB

13.3 type (TFT) (for CF-48x3xxxxx)

256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024x768 dots)

10 GB*2 (for CF-48xxAxxxx)

MicrosoftMicrosoft® Windows® 2000 (CF-48xxxxxDx)Microsoft® Windows NT® (CF-48xxxxxCx)

® Windows® 98 Second Edition (for CF-48xxxxxEx)

1 - 2

*1 Only a RAM card designed for PC100 can be added.*2 Use only a monaural condenser microphone.*3 Varies depending on the usage conditions.*5 The AC adaptor is compatible with power sources up to 240 V AC adaptor.

This computer is supplied with a 125 V AC compatible AC cord.*6 Approx. 1.5 W when the battery pack is fully charged (or not being charged) and the computer is OFF.

Approx. 3.5 W when the [Wake up from LAN] has been enabled (Model with both an internal modem and an internal LAN port).*7 Rated power consumption.*8 Consecutive disk access of the SuperDisk drive between 30˚C and 35˚C {86 ˚F and 95 ˚F} for 15 minutes or more may damage the da ta on

the disk.

<Model with both an internal modem and internal LAN port>

Keyboard

Floppy Disk Drive

CD-ROM Drive

DVD-ROM Drive

Slots

Interface

Pointing Device

Speaker

Utility Programs

Sound

Battery Pack

Battery

Clock Battery

AC adaptor*5

Power Consumption*6

Environment

Physical Dimensions (W X H X D)

Weight

87 keys for European market88 keys for US market

720 KB/1.44 MB (two-mode)

for CF-48xxxBxxx

for CF-48xxxAxxx

PC Card Slots Two Type I or Type II, or one Type III

Allowable current 3.3 V: 400 mA, 5 V: 400 mA(total for two slots)

RAM Module Slot*1 144-pin, 3.3-V, SO-DIMM, SDRAM, PC100 Compliant

Parallel Port Dsub 25-pin female

External Display Port Mini Dsub 15-pin female

Serial Port Dsub 9-pin male

Microphone Jack*2 Miniature jack, 3.5 DIA

Headphone Jack Miniature jack, 3.5 DIAImpedance 32 W, Output Power 4 mW x 2

External Keyboard/Mouse Port Mini DIN 6-pin female

Expansion Bus Connector Dedicated 100-pin female

USB Port 4-pin x 2

Internal Modem Data: 56 kbps (V.90 & K56flex) FAX:14.4 kbps

Touch Pad

Stereo Speaker (built in)

Setup Utility, DMI Viewer

HRTF 3D positional audio support 16-bit stereo, WAVE and MIDI playback

Li-ion 11.1 V, 5.4 Ah

Operating Time*3 Approx. 2.0 hours - 5.0 hours

Charging Time*3 Power On Approx. 5.5 hours

Power Off Approx. 3.0 hours

Coin type lithium battery 3.0 V

Input 100 V - 240 V AC, 50 Hz/60 Hz Output 15.6 V DC, 3.85 A

Approx. 45 W*7 / Approx. 70 W (maximum when recharging in the ON state)

In use Temperature 5 ˚C to 35 ˚C*8 {41 ˚F to 95 ˚F}Humidity 30% to 80% RH (No condensation)

Not in use Temperature -20 ˚C to 60 ˚C {-4 ˚F to 140 ˚F}Humidity 30% to 90% RH (No condensation)

307 mm X 45 mm X 260 mm {12.1 " X1.8 " X 10.2 "}

Approx. 3.4 kg {Approx. 7.4 lb.}

Other Specifications

Internal LAN IEEE 802.3 10Base-TIEEE 802.3u 100Base-TX

Interface

2 - 1

2. Names and Functions of Parts

For information on the key combi-nations available.

Before using the computer for the first time,carefully read the [Limited Use LicenseAgreement]. If you agree to the conditions,remove the seal.

A Kensington cable can be con-nected to prevent theft of yourcomputer. For more informa-tion, please read the manual thatcomes with the cable.

To adjust the volume*2, select the on the taskbar, then [Volume Control].*2 You may also use the function keys to perform this operation

( Fn + F5 or F6 ).Speaker on/off : Fn + F4

Power statusBattery pack status

Use this connector to connectheadphones or amplifier-equippedspeakers. Audio output from theinternal speaker is disabled whenheadphones or external speakersare connected.

Use only a monaural condenser microphone.Using an input source other than a monauralcondenser microphone may not allow audio tobe input or may damage the equipment.

The illustrations shown may differ from the actual physical appearances.

or

Caps LockNumeric key (NumLk)Scroll lock (ScrLk)CD-ROM/DVD-ROM statusFloppy disk/SuperDisk statusHard disk statusPower status

LOCK

or

*1 SuperDiskTM and SuperDisk logo are trademarks ofImation Corp.

Speakers

LED Indicators

Security Lock

Function Keys

LCD

Floppy Disk Drive

SuperDisk TM Drive *1

Power Switch

Headphone Jack

Microphone Jack

CD-ROM Drive

PC Card Slots

LED Indicators

Touch Pad

DVD-ROM Drive

2 - 2

These holes allow heat to exit.

CAUTION

Do not block or place the computer in a loca-tion that may prevent proper ventilation.

External Display Port

Parallel Port

External Keyboard/Mouse Port

USB Port

Serial Port

Ventilation Hole

RAM Module Slot

Expansion Bus Connector

Internal Modemor

Internal Modem & LAN Port

Battery Pack

DC-IN Jack

This cover is not to be opened by anyoneexcept authorized service personnel.

CAUTION

3 - 1

3.Technical Information3.1 System Overview3.1.1 System Configuration

The main system is made up of a Main board, a SUB board, a Jack board, a LED board, a IF switch board,

a PAD board and a COM board.

The power circuit has voltage for individual 1.6V/2.5V/3.3V/5V/12V.

It also supports both mixed-voltage LSIs at 3.3V/5V and single-voltage LSIs at 3.3V.

The CPU operates at 1.6V, 1.35V(core)/2.5V; the main memory at 3.3V; the core logic at 3.3V/5V; and the

other main chips at 3.3V.

3.1.2 Power Supply SystemThe power supply used by the Main board is generated on the Main board based on the voltage from the AC adapter.

Power is supplied to the AC adapter and battery pack in that order when the RTC power is off or is in

suspend mode. When neither power supply can be accessed, power is supplied from the clock battery

(RTC battery).

Block Diagrams

Power Supply Configuration Diagram

Power Supply System Description On mode Suspendmode

Off/Hibernation

VC system (VC5, VC3, VC25, VC16, VC15) CPU and logic power supply ON OFF OFFVB system (VB5, VB3) Logic power supply ON ON OFF

VA system (VA3) PMC power supply ON ON ON

VPP system (VPP) 12V power supply, for the card slot ON OFF OFFTable 1: Description of Power Supply Systems

Li-Ion BATTERY11.1V5400mAh

AC ADAPTOR 15.6V

BATTERYCHARGER

DC/DCCONVERTEROUTPUT 5V

VOLTAGEDETECTOR

AC IN*

DC/DCCONVERTEROUTPUT1.6V /1.35V

DC/DCCONVERTEROUTPUT 3.3V

IC44

AC ON

OVERVOL

VOLTAGEDETECTOR

VOLTAGEREGULATOROUTPUT12V

VOLTAGEDETECTOR

VOLTAGEDETECTOR

SUSB*

SUSB*

SUSB

SUSC*OVERVOL

ACVOK

OVERVOL

OVERVOL

VOLTAGEREGULATOROUTPUT 1.5V

IC58

IC58

IC57

SUSB

IC43

VD12ON

IC46

IC16

VA3

VC1

VB3

VC3

VD12

SYSPW

VC5

VM1

VB5AC15

VCT

VGA_COREVOLTAGEREGULATOROUTPUT 2.5V

Q70

Q62

Q72

3 - 2

intintint llleee

443BX443BX443BXExtension MemoryExtension MemoryExtension MemoryExtension Memory

(SDRAM)(SDRAM)(SDRAM)(SDRAM)256MB256MB256MB256MB

PCI ISA

Bridge

PIIX4MPIIX4MPIIX4MPIIX4MINTEL

IDE

Interface

USB

Interface

HDD20/10GB2.5 inch

CD-ROMDRIVEX24max

Primary

USBDEVICES

Secondary

PCMCIAPCMCIAPCMCIAPCMCIARB5C478

RICOHRICOHRICOHRICOH

BIOSBIOSBIOSBIOSFlashROM

512KB

SOUNDSOUNDSOUNDSOUNDES1988 ESS

KBCKBCKBCKBC EmbeddedEmbeddedEmbeddedEmbeddedControllerControllerControllerController

32bit PCI Bus

16/8bit ISA/EIO Bus

MODEMMODEMMODEMMODEMorororor

COMBOCOMBOCOMBOCOMBO

Ext. MIC

Speaker

Int. KB

Flat PAD

PS/2 Port

Li-IonBattery Pack

TYPE II(SLOT A)

TYPE II(SLOT B)

Super I/OSuper I/OSuper I/OSuper I/OPC97338

NS

FDD

Serial

Parallel

Main Memory(SDRAM)Main Memory(SDRAM)Main Memory(SDRAM)Main Memory(SDRAM)!!!! 64M/128MB64M/128MB64M/128MB64M/128MB

1.5V (GTL)

3.3V

3.3V

RJ11Connecter

MiniPCI

64bit Host Bus

SuperDiskDrive

Headphone

LCD14.1”/13.3”

CRT

Rage Mobility M1Rage Mobility M1Rage Mobility M1Rage Mobility M1ATIATIATIATI

VRAM8.0MB

VGAVGAVGAVGAAGP Bus

Portreplicator

or

RJ45Connecter

Mobile Pentium III wwwwwiiiii ttttt hhhhh

Intel® SpeedStepTM

Technology

int le

~

16/8bit ISA/EIO Bus

Host PCIBridge

443BXINTEL

DRAMInterface

II

System Configuration Diagram

3 - 3

3.2 System Memory Map

3 - 4

I/O Address Map (CF-48)Address Function IC No,

x0000 - x000F Direct memory access controllerx0010 - x0018 Motherboard resourcesx001F - x001F Motherboard resourcesx0020 - x0021 Programmable interrupt controllerx0022 - x0022 Motherboard resourcesx0024 - x0025 Motherboard resourcesx0028 - x0029 Motherboard resourcesx002C - x002D Motherboard resourcesx0030 - x0031 Motherboard resourcesx0034 - x0035 Motherboard resourcesx0038 - x0039 Motherboard resourcesx003C - x003D Motherboard resourcesx0040 - x0043 System timerx0050 - x0052 Motherboard resourcesx0060 - x0060 Standard 101/102-Key or Microsoft Natural Keyboardx0061 - x0061 System speakerx0062 - x0062 Motherboard resourcesx0064 - x0064 Standard 101/102-Key or Microsoft Natural Keyboardx0066 - x0066 Motherboard resourcesx0070 - x0071 System CMOS/real time clockx0072 - x0077 Motherboard resourcesx0080 - x0080 Motherboard resourcesx0081 - x008F Direct memory access controllerx0090 - x009F Motherboard resourcesx00A0 - x00A1 Programmable interrupt controllerx00A4 - x00A5 Motherboard resourcesx00A8 - x00A9 Motherboard resourcesx00AC - x00AD Motherboard resourcesx00B0 - x00BD Motherboard resourcesx00C0 - x00DF Direct memory access controllerx00F0 - x00FF Numeric data processorx0170 - x0177 Intel 82371AB/EB PCI Bus Master IDE Controllerx0170 - x0177 Secondary IDE controller (dual fifo)x01B0 - x01B1 Motherboard resourcesx01F0 - x01F7 Intel 82371AB/EB PCI Bus Master IDE Controllerx01F0 - x01F7 Primary IDE controller (dual fifo)x0376 - x0376 Intel 82371AB/EB PCI Bus Master IDE Controllerx0376 - x0376 Secondary IDE controller (dual fifo)x0378 - x037F ECP Printer Port (LPT1)x0398 - x0399 Motherboard resourcesx03B0 - x03BB RAGE MOBILITY AGP (English)x03C0 - x03DF RAGE MOBILITY AGP (English)x03F0 - x03F5 Standard Floppy Disk Controllerx03F6 - x03F6 Intel 82371AB/EB PCI Bus Master IDE Controllerx03F6 - x03F6 Primary IDE controller (dual fifo)x03F7 - x03F7 Standard Floppy Disk Controllerx03F8 - x03FF Communications Port (COM1)x04D0 - x04D1 Motherboard resourcesx0778 - x077F ECP Printer Port (LPT1)x0CF8 - x0CFF PCI busx1000 - x103F Motherboard resourcesx1040 - x104F Motherboard resourcesx1050 - x1057 Primary IDE controller (dual fifo)x1050 - x105F Intel 82371AB/EB PCI Bus Master IDE Controllerx1058 - x105F Secondary IDE controller (dual fifo)x1060 - x1067 Lucent Win Modemx1400 - x14FF ESS Allegro PCI Audio (WDM)x1800 - x18FF Lucent Win Modemx2000 - x20FF RAGE MOBILITY AGP (English)x2000 - x2FFF Intel 82443BX Pentium(r) II Processor to AGP controllerxFE00 - xFE01 Motherboard resources

4 - 1

4. Diagnosis Procedure

4.1. Basic ProceduresThe basic procedures for diagnosis, disassembly, and test of defective parts of a set to be repaired are summarized below. For

details, refer to relevant pages in the Service Manual.

lllll Flow Chart

Power On Self Test

OCCURRENCE OF TROUBLE

Automatic diagnosis takes place when the power switchis set to ON.

Power sw is set to ON.

POST NORMAL FINISH POST ERROR

OCCURRENCE

DEFECTIVE PARTS SORTING

SELF-DIAGNOSIS TEST (IF REQUIRED)Conduct a self diagnosis test whenit is necessary for conducttrouble diagnosis.

TROUBLESHOOTINGDefective parts are sorted byreferring to symptoms.

SELF-DIAGNOSIS TESTAfter repair, conduct a self-diagnosis test and make sure that therepaired set operates properly.

DISASSEMBLY PROCEDUREReplace defective parts.

REPAIR WORK

INSPECTIONTEST FAILED

TEST OK

END OF REPAIR WORK

4 - 2

4.2. Power-On Self Test (Boot Check)

4.2.1. Outline of POST

The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checkingbeep sound or error code.

� Start .............Test begins automatically when power switch is set to ON.� Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop.

Note: If no error occurs, nothing is displayed. (No display of OK, etc.)

4.2.2. Error Diagnosis by Checking Beep Signal SoundThe beep sound is as follows:

= long sound (about 0.4 sec.), = short sound (about 0.2 sec.), Length between sounds is about 0.1 sec.

� Table of errors classified by beep sounds

(1 (long sound) -2-3-4)

(Length of bar shows length of sound.)

Diagnosis Beep signal sound Error message

1(long sound)-2 BIOS ROM error

BIOS ROM error

RAM error

Keyboard controller error

RAM error

RAM error

RAM error

1-2-2-3

1-3-1-1

1-3-1-3

1-3-4-1

1-3-4-3

1-4-1-1

BIOS ROM error2-1-2-3

Occurrence of unexpected offering2-2-3-1

Main board

(Note) A beep sound is also issued in case of other I/O trouble.

4 - 3

4.3. List of Error Codes

4 - 5

4.4. Diagnosis Map4.4.1. MAIN UNIT DIAGNOSIS (1/2)

Make sure that connecting cables, connectors and AC adapter are not loose or disconnected prior to testing.

No. SymptomTroubleshooting

proceduresSource ofproblem

ComponentNo. Result

1 No power is sent to theunit.(when using AC)

YES Go to No. 1-6NO Go to No. 1-2

Is voltage pin 4 of Q70 lowerthan 1V?

YESIf voltage pin 3 ofD24 is 15V

Q70

NOR415Q69

If lower than 15V D24

1-4

Is voltage pin 4 of Q62 lowerthan 1V?

YESIf voltage pin 3 ofD24 is 15V

Q62

NOQ61

If lower than 15VD28, D29D30, D31

1-5

1-1Is 15V applied to pins 5-8 ofQ74? (Whichever one)?

YES Go to No. 1-5NO Go to No. 1-3

1-2Is 15V applied to pins 1 ofQ74?

YES Go to No. 1-4

If lower than 1 D26

NO

If resistanceacross L93terminals is notlower than 1

L211-3Is 15V applied to pins 1 ofQ70?

No power is sent to theunit, (When using theBattery Pack)Power cuts off duringoperation.

YES

If voltage is 0Vduring the powerswitch is set toON, go to No. 1-7

Final Means

Is 8~12V applied to pins 5~8of Q62? (Whichever one)

Main PCB IC58

YES

If they showsolderedcompletely

R389, R390R403, R404

1-7

1-8

Check soldered parts ofR389, 390, 403 and R404.

NO2-1

IC58YES

1-6

Before setting the powerswitch to ON, check voltageon either side of R260. IsVoltage 3.3V?

If not 0V

NOIf voltage of C454is 3.3VIf lower than 3V

Go to No. 1-6

IC58

NO Go to No. 1-5

R260

SW801

2

4.4.2 MAIN UNIT DIAGNOSIS (2/2)


ComponentSource ofproblem


proceduresNo. Result

1 YES Go to No. 1-21-1

Are there system files in thedevice selected?

When a device is selectedfor “Boot Up Drive”, thesystem boots from adifferent device.

NO Improper setting

YESDevice for whichthe problemoccurred

1-2Does the unit operatenormally after replacing theproblem device.

(HDD)IC13

(FDD/SDD)IC13IC23

NO Main PCB

4 - 6




Main PCBIC13X2

RTC battery

2

2-1 Replace the Main PCB.

Date or Time cannot beinput.Date and Time does notchange properly.Date and Time are notdisplayed.

Main PCBIC5 12

IC33

3-1 Replace the Main PCB.Memory count is too largeor too small.

YESNO

Software settingGo to No. 4-2

YES

NO

Speakers

Go to No. 4-3

44-1

4-2

Check software setting.

Replace the Speakers.Does operation return tonormal?

Main PCBIC30IC33

4-3 Replace the Main PCB.

No Sound Volume does not work.

12NO

11

ConfigurationCheck configuration.5-15 Default configuration in

use

Main PCB IC136-16 Interrupt controller failure

Main PCB7-17 Timer failureGo to No. 8-2Does the system return to

normal if the expansion cardis removed?

YES

Main PCBNOIC13IC3

8-18 Expansion card RAM

checksum error

Expansion cardReplace the expansion card.Does operation return tonormal?

YES

Main PCBNO8-2

Main PCB IC139-19 Real Time Clock failure

Error duringSETUP

Battery

Main PCB

Does resetting throughSETUP correct the problem?

Replace the battery.Does operation return tonormal?

YES

YES

NO

RTC battery

IC13

10-1

10-2

10 Dead RTC Battery

Go to No. 10-2NO

ConfigurationCheck configuration.11-1Configuration errorGo to No. 12-2Were the correct settings

selected during SETUP?YES

Go to No. 12-412-1

CMOS Checksum error

FDDReplace the FDD.Does operation return tonormal?

YES

Go to No. 12-3NO12-2

HDDReplace the HDD.Does operation return tonormal?

YES

Go to No. 12-4NO12-3

Error duringSETUPDoes resetting through

SETUP correct the problem?

YES

Main PCBNOIC13X2

12-4

4 - 7

15 PCI failur Go to No. 15-2Does the system return tonormal if the expansion cardis removed?

YES

Main PCBNO IC315-1

Expansion cardReplace the expansion card.Does operation return tonormal?

YES

Main PCB NO IC315-2




13 Does resetting the date/timein SETUP correct theproblem?

13-1Real time Clock is notupdating

Error duringSETUP

YES

Main PCBNO IC1314 Replace the expansion RAM

card.Does operation return tonormal? (Go to “NO” if notconnected.)

14-1

Memory size/data error Expansion RAMcard

YES

Main PCB NOIC3

IC5 12

4.4.3 LCD DIANOSIS





1YES

Brigntnessadjustment1-1

Does the LCD displayproperly after brightnesslevel is adjusted?

No picture appears on thescreen.

Brigntnessadjustment

22-1

Does the LCD displayproperly after brightnesslevel is adjusted?

Display is too dark or toobright.

LCD

Go to No. 3-2

33-1

Replace the LCD.Does operation return tonormal.

Part of the screen doesnot display properly.Display quality poor.(Fuzzy or slanted, etc.)

NO

YES

NO

Go to No. 1-2

Go to No. 2-2

CN16IC52

LCD2-2

Replace the LCD.Does operation return tonormal?

2-3Replace the Main PCB.Does operation return tonormal?

YES

NO

YES

NO

Main PCB

LCD cable

IC14YES

NO

Inverter PCB

Go to No. 4-2

44-1

Replace the Inverter PCB.Does operation returnt onormal?

Backlight does not turn on. YES

NO

Main PCB

LCD cable

IC143-2

Replace the Main PCB.Does operation return tonormal?

YES

NO

Go to No. 2-3

Main PCBYES

NO LCD cable

YES LCD1-2

Replace the LCD.Does operation return tonormal?


NO Go to No. 1-3

Inverter cable

Go to No. 4-34-2

Replace the Inverter cable.Does operation return tonormal?

YES

NO

Backlight

Main PCBCN16IC52

4-3Replace the backlight.Does operation return tonormal?

YES

NO

4 - 8

4.4.4 KEYBOARD, MOUSE or TOUCH PAD DIAGNOSIS


NO



No. Result1

Keyboard1-1 Keyboard is broken.

Key top cannot bepressed.Key top does not springback after pressing.

22-1

Replace the keyboard andsee if inputting from thekeyboard function normally?

None of the keys function.Certain keys do notfunction.

Component

YES

NO

Keyboard

Main PCB

3 3-1 Does the screen modecorrespond to the key entrymode?

Input character isdisplayed as grabage.

YES Go to No. 3-2

4 Mouse does not function.Inputs from the mouse arenot accepted properly.

5 Touch pad not function.Input from the track ballare not accepted properly.

4-1Replace the mouse.Does operation return tonormal?

YES

NO

Mouse

Main PCB IC26

5-1Replace the touch pad.Does operation return tonormal?

YES Touch Pad

Go to No. 5-2

5-2Replace the touch pad FPC.Does operation return tonormal?

YES

NO

Touch Pad FPC

Main PCB IC26

3-2Is the keyboard setting in theoperating system correct?

NOOperatingmistake

3-3Replace the keyboard andsee if inputting from thekeyboard functions normally.

YES

NO

Keyboard

Main PCB IC26

YES Go to No. 3-3NO Software setting

KeyboardYESReplace the keyboard.Does operation return tonormal?

Keyboard interface failure7-1

Main PCBNO IC26

7

6 Go to No. 7Is the keyboard properlyconnected?

YESKeyboard wasnot connectedproperly

NO6-1

Keyboard failure

4 - 9

4.4.5 FDD DIAGNOSIS


YES

NO



No. Result1

1-1Replace the FDD.Does operation return tonormal?

Access lamp does notlight.

Component

FDD

Go to No. 1-2

22-1

In the floppy disk warped orbent, or labels interfering?

Cannot insert floppy disk.Cannot remove floppy disk.

Floppy diskFDD

YESNO

33-1

Are there system files on themedia?

Does not boot from FDD. Main PCBSoftware

IC23YESNO

44-1

Is the floppy disk formatcorrect for the operatingsystem currently being used?

Cannot read from floppydisk.Cannot write to floppy disk.

Go to No. 4-2

Floppy disk format

YES

NO

55-1

Try cleaning the disk heads.Does this fix the problem?

Floppy disk is scratched orotherwise damaged.

Heads were dirtyFDD

YESNO

66-1

Was the eject button pressedwhile the system wasaccessing the disk?

Content of floppy disk isdestroyed.

Operating mistake

Go to No. 6-2

YES

NO

6-2Replace the FDD.Does operation return tonormal?

FDD

Main PCB IC23

YES

NO

77-1

Does this occur for a specificfloppy disk?

Damage to contents writtento floppy disk.Damage to contents readfrom floppy disk.

Floppy diskGo to No. 7-2

YESNO

88-1

Does it sound like the head ismoving?

Abnormal sound. NormalGo to No. 8-2

YESNO

7-2

7-3

Replace the FDD.Does operation return tonormal?Replace the FDD FPC.Does operation return tonormal?

8-2Does the abnormal soundstop when the motor stopsrunning.

FDD

FDD FPC

Go to No. 7-3

Main PCB IC23

YES

YES

NO

NO

FDDYES

99-1

9-2


Diagnostic Test reportsproblem in FDC.

FDD

FDD FPC

Go to No. 9-2

Main PCB IC23

YES

YES

NO

NO

4-2Does this occur for a specificfloppy disk?

Floppy diskGo to No. 4-3

YESNO

4-3Try cleaning the disk heads.Does this fix the problem?

Heads were dirtyGo to No. 4-4

YESNO

4-4

4-5


FDD

Go to No. 4-5

YES

NO

1-2Replace the LED PCB.Does operation return tonormal?

LED PCB

Go to No. 1-3

LD805YES

NO


Main PCB

FDD FPC

IC23YES

NO

FDD FPC

Main PCB IC23

YES

NO

4 - 10

4.4.6 HDD DIAGNOSIS


NO



No. Result1

1-1 Has the HDD been partitioned?Does not boot from HDD.

Component

Go to No. 1-2Improper setting

YESNO

22-1 Has the HDD been formatted?

Cannot read from HDD.Cannot write to HDD.

Go to No. 2-2HDD format

YESNO

33-1

3-2

Replace the HDD.Does operation return tonormal?Replace the HDD cable.Does operation return tonormal?

Replace the HDD.Does operation return tonormal?Replace the LED PCB.Does operation return tonormal?Replace the Main PCB.Does operation return tonormal?

Damage to data written toHDD.Damage to data read fromHDD.HDD contents aredestroyed.

HDD

Go to No. 3-2

YES

55-1

5-2

5-3

5-4

Has the HDD beenconfigured in the OS?

Access lamp does notlight.

Go to No. 5-2

Improper setting

YES

NO

44-1

Replace the HDD.Does operation return tonormal?

Dignositic Test reportsproblem in HDC or HDD.

66-1 Replace the HDD.

Abnormal sound.HDD

2-2

2-3


HDD

Go to No. 2-3

YES

NO

1-2Are there system files on theHDD?

Go to No. 1-3Software on theHDD

YES

NO

1-3

1-4


HDD

HDD cable

Go to No. 1-4

Main PCB IC13

YES

YES

NO

NO

HDD cable

Main PCB IC13

YES

NO

HDD cable

Main PCB IC13

YES

NO

HDD

Main PCB IC13

YES

NO

HDD

Go to No. 5-3

YES

NO

LED PCB

Go to No. 5-4

LD806YES

NO

Main PCB

HDD cable

IC13YES

NO

7 Hard disk failureDoes executing FDISKcorrect the problem?

7-1

HDD cableYES

Main PCBNO IC13

Go to No. 7-2NO

Format datadestroyed

YES

Replace the HDD.Does operation return tonormal?

7-2Go to No. 7-3NO

HDD YES

Replace the HDD cable.Does opration return tonormal?

7-3

4 - 11



No. ResultComponent

HDD cableYES

Main PCBNO IC13

8-2

8-3

8 Format datadestroyed

Does executing FDISKcorrect the problem?

YES

Go to No. 8-2NO8-1

An operating system couldnot be found

HDD Replace the HDD.Does operation return tonormal?Replace the HDD cable.Does operation return tonormal?

YES

Go to No. 8-3NO

4.4.7 SERIAL COMMUNICATION DIAGNOSIS


1-2Is the same transmissionprotocol set for both thesending and receiving units?

YES

YES

NO

NO



ComponentNo. Result

1 Data cannot be sent orreceived.

Unit will not communicatewith another computerwhen connected directly.

Does the RS-232C on theMain PCB operate normallyunder a loopback test?

1-3

Is the connection cable adedicated cross-patchedcable?

2-1

Is the same transmissionprotocol set for both thesending and receiving units?

2-2

1-1Is the COM port properlyset?

YES Go to No. 1-2

NO Improper setting

2

Unit will not communicatewith modem.

3

Diagnostic Test reportsproblem in serial port.

4

Go to No. 1-3

Check theinterface with theother computer

Main PCBIC23IC25

Improper setting

YES

NO

Go to No. 2-2

Connection cable

YES

NO

Go to No. 2-3

Improper setting

Is the COM port properlyset?

3-1YES

NO

Go to No. 3-2

Improper setting

YES

NO

Does the RS-232C on theMain PCB operate normallyunder a reverse test?

2-3

Check theinterface with theother computer

Main PCBIC23IC25

Is the trasmission protocolcorrect?

3-2YES

NO

Go to No. 3-3

Improper setting

Does the modem operatenormally under a localanalog loopback test?

3-3YES

NO

Line

Go to No. 3-4

Does the RS-232C on themain board operate normallyunder a loopback test?

Is the loop back deviceproperly attached to theconnector (for an externalloop back)?

3-4

4-1

YES

YES

NO

Modem

Main PCB

Main PCBIC23IC25IC23IC25

NO Improper setting

4 - 12

4.4.8 PRINTING DIAGNOSIS




ComponentNo. Result

1 Data does not print fromthe printer. 1-1

Does the printer pass itsself-printing test?

YES Main PCB IC23

NO Printer

2-2Is the Parallel Port (DataDirection) setting correct?

YES Main PCB IC23

NO Improper setting

2 Data prints out incorrectly.2-1


3 The unit hangs afteroutputting data from theprinter.


YES Go to No. 2-2

NO Printer

YES Main PCB IC23

NO Printer

4 Print area is out of line.4-1


YES Main PCB IC23

NO Printer

5 Data is printed all on oneline.(Carriage return does notwork.)

4-2Does the printer pass itsself-printing test?

YES Main PCB IC23

NO Printer

4.4.9 CD-ROM Drive DIAGNOSIS




ComponentNo. Result

1 Access lamp does notlight. 1-1

1-2

Replace the CD-ROM drive.Does operation return tonormal?Replace the LED PCB.Does operation return tonormal?

YES

YES

CD-ROM drive

LED PCB

NO

NO

Go to No. 1-2

Go to No. 1-3

LD804

2-2Replace the CD-ROM drive.Does operation return tonormal?

YES CD-ROM drive

NO Main PCB IC13

2 Cannot read from DVD.2-1

Replace the media.Does operation return tonormal?

3 Tray does not open.3-1

Replace the CD-ROM drive.Does operation return tonormal?

YES Media

NO Go to No. 2-2

YES CD-ROM drive

NO Main PCB IC13

4 Abnormal sound.4-1

Replace the media.Does operation return tonormal?

YES Media

NO CD-ROM drive


YES Main PCB

NO CD-ROM FPC

IC13

5 - 1

5. Diagnostic Test5.1 Diagnostic Test Procedure5.1.1 Equipment

(1) Test Computer ......................................................................................................................................1 unit

(2) AC Adapter ...........................................................................................................................................1 pc.

(3) External Printer .....................................................................................................................................1 unit

(4) Loopback Plug (Parallel Port Test) [P/N: DFWV95C0081] ...................................................................1 pc.

(5) Loopback Plug (Serial Port Test for RS232C) [P/N: DFWV95C0067] ..................................................1 pc.

(6) Floppy Disk containg file DIAG .............................................................................................................1 pc.

5.1.2 Preparation(1) Connect the AC Adapter and External Printer to the computer.

(2) The System Setup should be set to the factory setting values by executing the "SETUP UTILITY" which can be invoked

by F2 key at the POST.

If not, the messages and items of the diagnostic test may not be displayed properly on the LCD.

(3) The serial port must be enabled in the "SETUP UTILITY" in order to execute the "1st SERIAL PORT" test.

(4) Connect the serial loopback plug.

(5) In order to test the parallel port with Loopback Plug, disconnect the printer cable and connect the parallel loopback plug

with Power OFF.

5.1.3 NOTICEWhen "Enter password" is displayed, use "Password Skipping Plug" in order to skip the user password.

1) Connect the parallel plug to the parallel port.

2) Connect the PS/2 mouse plug to the mouse port.

3) Power on the computer.

The wiring of the parallel plug is described below.

Connect pins 2-5-6-8-11-13-15-18-19-20-21-22-23 to Shield GND (PS/2 mouse plug pin 3.)

Connect pins 3-4-7-9-10-12 to VC5 (PS/2 mouse plug pin 4) with 4.7KW each.

CAUTION

The plug described above must be used for servicing purpose only.

Do not use it for other than the above purpose and ensure that it remains confidential.

Using the plug enables the user to skip the previous password and disable the password.

5 - 2

5.1.4 Test ProcedureUse the floppy disk containing file diag48.

Press [D] [I] [A] [G] [4] [8] and [Enter] keys.

DIAGNOSTIC MENU (V*.*L**)

1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. MAIN BOARD5. xxxxxKB RANDOM ACCESS MEMORY6. KEYBOARD7. TRACK BALL/MOUSE8. BATTERY PACK9. VIDEO

10. 1 HARD DISK DRIVE(S)11. 1 FLOPPY DISK DRIVE(S)12. 1 PARALLEL PORT(S)13. 1 SERIAL PORT(S)14. PCCARD CONTROLLER15. INFRARED COMMUNICATION PORT16. CD-ROM DRIVE

SELECT MENU : _

Select test item, Press number and Enter keys.

1) MAIN BOARD TEST

Press 4 and Enter keys. MAIN BOARD TEST

(Normal Message) : Test done ! ! Hit any key when ready._When an error message is displayed, refer to [5.2 Error Message].

2) xxxxxKB RANDOM ACCESS MEMORY TEST

Press 5 and Enter Keys. BASE RAM TESTCURRENT BASE RAM SIZE = 640KB640KB OK

EXTENDED RAM TESTCURRENT EXTENDED RAM SIZE = xxxxxKBxxxxxKB OK


3) KEYBOARD TEST

Press 6 and Enter keys. KEYBOARD1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. PRESS KEY TEST5. SCAN CODE RETURN TEST

SELECT MENU : _

5 - 3

For 4. PRESS KEY TEST.Press 4 and Enter Keys. PRESS KEY TEST

1. TEST ALL DEVICES ( DEVICES) 2. TEST AUTOMATICALLY ( DEVICES) 3. EXIT 4. U.S.A. 5. U.K. 6. SWEDEN 7. JAPAN 8. GERMANY 9. FRANCE10. ITALY11. SPAIN12. SWISS (Gr)

SELECT MENU : _

For 4. U.S.A..

Press 4 * and Enter keys. KEYBOARD TESTPress each key for character replacementIf correct, press "Y" and "ENTER"If not correct, press "N" and "ENTER"

(Normal Message): Keyboard is OK Hit any key when ready._When an error message is displayed, refer to [5.2 Error Message].

For 5. SCAN CODE RETURN TEST.

Press 5 and Enter keys. KEYBOARD RETURN CODE TEST

Hit any key. (Normal message) : KEY Key has been hit or broken (F10)SCAN code : xx

Test done ! ! Hit any key when ready._

When an error message is displayed, refer to [5.2 Error Massage].

4) POINTING DEVICEPress 7 and Enter keys. Track Ball/Mouse Test

Left button OFF

Right button OFF

Is this correct ? (Y/N)

1. If the condition is normal, the cursor moves according to the movement of the mouse.

2. Pressing the button on the left or right side of the mouse causes display to change from OFF to ON.

*Note: Press appropriate number according

to the keyboard layout.

Immediately after this message is displayed,press the key of

the test you would like toperform.

(The routine will terminate if no entry is pressed.)

5 - 4

5) BATTERY PACK TESTPress 8 and Enter keys. BATTERY PACK TEST

Battery Pack : exists.AC Adaptor : connected (Not connected)

(Normal message) : Test done ! ! Hit any key when ready._When an error message is displayed, refer to [5.2 Error Massage].

6) VIDEO TESTPress 9 and Enter keys. VIDEO

1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT

4. VGA COLOR MODE TEST 5. VGA MONO MODE TEST 6. S-VGA COLOR MODE TEST

SELECT MENU : _

Select the desired test item, and execute by the Enter key.

7) 1 HARD DISK DRIVE(S) TEST

Press 10 and Enter keys. 1st HARD DISK DRIVE(S)1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. HARD DISK CONTROLLER TEST5. 1st HARD DISK DRIVE TEST

SELECT : _

For 4. HARD DISK CONTROLLER TEST. .

Press 4 and Enter keys HARD DISK CONTROLLER TEST


For 5. 1st HARD DISK DRIVE TEST.

Press 5 and Enter keys. 1st HARD DISK DRIVE TEST

1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. HDD - DRIVE TEST5. HDD - READ/WRITE TEST6. HDD - SEQUENTIAL SEEK TEST7. HDD - RANDOM SEEK TEST

SELECT : _

*Use these tests to look at the screen andverify that the LCD screen is displayingproperly,.

5 - 5

For 4. HDD - DRIVE TEST.

Press 4 and Enter keys. 1st HDD - DRIVE TESTCount value to get SEEK COMPLETE = 0

(Normal Message) : Test done ! ! Hit any key when ready._When an error message is displayed, refer to [5.2 Error Message]

For 5. HDD - READ/WRITE TEST.

Press 5 and Enter keys. 1st HDD - READ/WRITE TEST

xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxxReserved cylinder for DIAGNOSTICS will lose its data.Reserved cylinder number = ***

xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxx

Do you want to continue ? (Y/N)

Press Y key.


For 6. HDD - SEQUENTIAL SEEK TEST.

Press 6 and Enter keys. 1st HDD - SEQUENTIAL SEEK TEST

Cylinder = xxx

The numbers indicated by xxx will vary depending on the type of HDD.


For 7. HDD - RANDOM SEEK TEST.

Press 7 and Enter keys. 1st HDD - RANDOM SEEK TEST

Cylinder = xxx

The numbers indicated by xxx will vary depending on the type of HDD.


8) 1FLOPPY DISK DRIVE(S) TEST

Press 11 and Enter keys. 1st FLOPPY DISK DRIVE(S)1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. FLOPPY DISK CONTROLLER TEST5. 1st FLOPPY DISK DRIVE TEST

SELECT : _

5 - 6

For 4. FLOPPY DISK CONTROLLER TEST.

Press 4 and Enter keys. FLOPPY DISK CONTROLLER TEST


For 5. 1st FLOPPY DISK DRIVE TEST.

Press 5 and Enter keys. 1st FLOPPY DISK DRIVE TEST1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. DRIVE TEST5. 720KB - MEDIA TEST6. 1.44MB - MEDIA TEST

SELECT MENU : _

For 4. DRIVE TEST.

Press 4 and Enter keys. 1st FLOPPY DISK DRIVE (1.44MFD) TEST


For 5. 720KB - MEDIA TEST.Press 5 and Enter keys. NOTE) At this time insert a formattable floppy disk into the FDD.

(All data on the floppy disk will be erased.)

720KB - MEDIA TEST

xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxxCONTENTS OF DISK WILL BE DESTROYED

xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxx

Insert scratch 2DD disk into 1st drive Press a key to begin formatting.Hit any key when ready.

Formatting.......

Read/Write testSequential seek testRandom seek test

(Normal Message): Test done ! ! Hit any key when ready._When an error message is displayed, refer to [5.2 Error Messages].

*Use the same procedure for 6, (1.44MB-MEDIA TEST).

5 - 7

9) 1 PARALLEL PORT(S) TEST.

Press 12 and Enter keys. 1st Parallel port test1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT4. PRINT OUT TEST5. EXTERNAL LOOPBACK TEST

SELECT : _

For 4. PRINT OUT TEST.

Press 4 and Enter keys. 1st Parallel port test (I/O address xxxH)Connect printerHit any key when ready._

(Normal Message): Sample characters will be printed to the printer.

1st Parallel port test (I/O address 378H) !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmno!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnop"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopq#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqr$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrs%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrst&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrstu'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrstuv()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrstuvw)*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]ˆ_àbcdefghijklmnopqrstuvwx

When an error message is displayed, refer to [5.2 Error Message].

For 5. EXTERNAL LOOPBACK TEST.

Press 5 and Enter keys. 1st Parallel port test (I/O address xxxH)

Connect loopback plug. Connect the loopback plug to the parallel port.

Hit any key when ready._

(Normal Message): Test done ! ! Hit any key when ready._When an error message is displayed, refer to [5.2 Error Message].

13 12 11 10 9 8 7 6 5 4 3 2 1

25 24 23 22 21 20 19 18 17 16 15 14

1-10-15 Pin

11-16 Pin

12-14 Pin

13-17 Pin

Loopback Plug Wiring Information

5 - 8

10) 1 SERIAL PORT(S)

Press 13 and Enter keys. 1st SERIAL PORT TEST

1. TEST ALL DEVICES ( DEVICES)2. TEST AUTOMATICALLY ( DEVICES)3. EXIT

4. RS232C CONTROLLER REGISTER R/W TEST 5. INTERNAL LOOPBACK TEST

6. EXTERNAL LOOPBACK TEST

SELECT MENU : _

For 4. RS232C CONTROLLER REGISTER R/W TEST.

Press 4 and Enter keys. 1st serial port test (I/O address xxxH)


For 5. INTERNAL LOOPBACK TEST.



For 6. EXTERNAL LOOPBACK TEST.


Connect loopback plug. Connect the loopback plug to the serial port.

Hit any key when ready._


Loopback Plug Wiring Information

1 2 3 4

6 7 8 9

5

5 - 9

11) PCCARD CONTROLLER TEST.

Press 14 and Enter keys. PCCARD CONTROLLER

(Normal Message): Test done ! ! Hit any key when ready._

when an error message is displayed, refer to [5.2 Error Message].

12) INFRARED COMMUNICATION PORT TEST.

Press 15 and Enter keys. 1. TEST ALL DEVICES ( DEVICES)

2. TEST AUTOMATICALLY ( DEVICES)

3. EXIT

4. CONTROLLER REGISTER R/W TEST

5. INTERNAL LOOPBACK TEST

SELECT MENU : _

For 4. CONTROLLER REGISTER R/W TEST.

Press 4 and Enter keys. CONTROLLER REGISTER R/W TEST

Infrared port (I/O address xxxxH)



For 5. INTERNAL LOOPBACK TEST.

Press 5 and Enter keys. INTERNAL LOOPBACK TEST

Infrared port (I/O address xxxxH)



13)CD-ROM DRIVE TEST.

Press 16 and Enter keys. Insert the Firstaid CD in to the CD-ROM drive.

Place the enclosed Firstaid CD on the CD-ROM drive.

Hit any key when ready_



5 - 10

5.2 Error Message

IC13

IC13

IC13

IC13

IC26

IC13

IC13

IC5-12

IC5-12

IC5-12

IC1IC3

5 - 11

IC13IC26

IC26

IC23

IC23

IC23

5 - 12

IC23

IC23

IC26IC23

IC23

IC23

5 - 13

IC23

IC19

IC30

IC52

IC13

5 - 14

5 - 15

6 - 1

6. Disassembly/ReassemblyNote: Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode;

abnormal operation may result.

6.1. Removing the Battery Pack.

Figure 1

1. Slide the latch, and then without releasing it, slide and re-

move the cover.

Figure 2

2. Pull the tab and remove the battery pack.

6.2. Removing the HDD Unit.

Figure 3

1. Slide the latch, and then without releasing it, slide and re-

move the HDD cover.

Figure 4

2. Pull the tab and remove the HDD unit.

Figure 51.

3. Release the HDD cable and remove the HDD unit.

6 - 2

6.3 Removing the RAM Card andthe RTC Battery

Figure 6

1. Remove the screw <F>, and remove the RAM card cover.

Screw <F>: DXSB26+4FZMT

Figure 7

2. While opening the hooks on the RAM card connector out-

ward, lift and remove the RAM card.

6.4. Removing the MINI-PCI ModemCard.

Figure 8

1. Remove the screw <F>, and remove the MINI-PCI Modem

Cover.


Figure 9

2. Disconnect the modem cable.

3. While opening the hooks on the MINI-PCI modem card con-

nector outward, lift and remove the MINI-PCI modem card.

6.5. Remove the CD-ROM Drive.

Figure 10

1. Remove the two screws <H> and release the CD-ROM drive

FFC.

2. Slide out the CD-ROM drive.

Screw <H>: XYN2+J4FN

6 - 3

6.6. Removing the Center Cover.

Figure 11

1. Release the two hooks of the center cover.

Figure 12

2. Remove the center cover.

6.7. Removing the Keyboard

Figure 13

1. Slide the keyboard to unhook it.

Figure 14

2. Turn over the keyboard.

3. Disconnect the connectors CN703 and CN704, and remove

the keyboard.

6 - 4

6.8. Remove the Top Shield Plate.

Figure 15

1. Remove the four screws <F>, and remove the top shield

plate.


6.9. Removing the LCD Unit.

Figure 16

1. Disconnect the connectors CN1 and CN16.

2. Remove the three screws <A> and the screw <G>, and

remove the LCD unit.

Screw <A>: XYN26+J4

Screw <G>: DXSN26+25MT

6.10. Removing the SuperDisk Driveor the FloppyDisk Drive.

Figure 17

1. Release the SDD FPC or the FDD FPC.

Figure 18

2. Remove the screw <S>.

3. Slide out the SuperDisk drive or the FloppyDisk drive.

Screw<S>: XYN2+J4FN

6 - 5

6.11. Removing the Top Cabinet andSub PCB Angle.

Figure 19

1. Remove five screws <F>, screw and screw <D>.


Screw : XYN26+J8FZ

Screw <D>: XTB26+10GFZ

Figure 20

2. Disconnect the connector CN705.

3. Remove the two screws <F>.

4. Remove the top cabinet.


6.12. Removing the IF PCB.

Figure 21

1. Remove the screw <E>, and remove the sub PCB angle.

2. Remove the tilt support R, battery shield plate unit and HDD

top shield plate.

Screw <E>: XTB26+8G

Figure 22

3. Disconnect the connector CN701 to remove the IF PCB.

4. Slide the IF PCB to remote it.

6 - 6

6.13. Removing the LED PCB, MAINPCB, VGA/CPU Heat Sink, Fan,I/O Plate and COM PCB.

Figure 23

1. Remove the two screws , and remove the LED PCB.

2. Remove the four screws <E>, and remove the FDD guide

plate and the tilt support L.

Screw : DXSB26+4FZMT

Screw <E>: XTB26+8G

Figure 24

3. Remove the screw <F> and six hex. screws <N>.

4. Remove the main PCB section.


S crew <N>: IKT0104AA

Figure 25

5. Remove the shaft spacer and two screws <L>, and remove

the I/O plate.

6. Remove the three H/Sink spacers and two screws <O>,

and remove the CPU/VGA heat sink, CPU/VGA heat sink

top plate and CPU/VGA heat sink bottom plate.

7. Remove the two screws <M>, and remove the fan.

Remove the two screws <K>, and remove the COM PCB.

Screw <L>: XYN2+J6

Screw <O>: DXHM0009YA

Screw <M>: XYN25+J5FZ

Screw <K>: DFHE5121YA

6 - 7

6.14. Removing the LCD.

Figure 26

1. Remove the two LCD rubbers and two LCD screw sheets.

2. Remove the 4 screws .

Screw : DXHM0009XB

Figure 27

3. Remove the LCD front cabinet.

4. Remove the LCD lock and LCD lock spring.

Figure 28

5. Disconnect the inverter cable and inverter output connec-

tor, and remove the Inverter PCB.

Figure 29

6. Remove the LCD cable clamper.

7. Remove the three screws , and remove the LCD and

the LCD earth plate unit.

8. Peel the LCD cable isolation and the LCD connector sheet,

and remove the LCD signal cable.

Screw : DXHM0009XB

6 - 8

Figure 30

9. Remove the fout screws <J>, and remove the LCD plate L

and the LCD plate R.

Screw <J>: DXQT2+D2L

Figure 31

10. Remove the two screws <K>, and remove the tilt L and

the tilt R.


6.15. Removing the PAD PCB.

Figure 32

1. Remove the four screw <C>, and remove the PAD plate.

2. Remove the PAD SW FFC and PAD MAIN FFC, and re-

move the PAD PCB.

3. Peel the touch PAD.

4. Remove the PAD button.

Screw <C> : XTB2+6G

6.16. Removing the Speaker

Figure 33

1. Unhook the four hooks of a speaker holder and unhook the

four hooks of another speaker holder.

2. Remove the two speaker hold rubber and the speaker with

cable.

6 - 9

6.17. Removing the IC Card Coverand the Port Replicator Cover.

Figure 34

1. Remove the two IC card covers and two IC card springs.

2. Remove the two port replicator covers and the two port

replicator springs.

6.18. Removing the HDD.

Figure 35

1. Remove the HDD case cover.

2. Remove the HDD iso. sheet.

3. Remove the HDD dumper.

4. Remove the HDD case.

6.19. Removing the FDD.

Figure 36

1. Remove the three screws <K>.

2. Remove the FDD plate and two FDD spacer bezels.

3. Remove the FDD FFC.


6.20. Removing the CD-ROM Driveor the DVD-ROM Drive

Figure 37

1. Remove the two screws <H>.

2. Remove the CD-ROM drive plate.

3. Remove the CD-ROM drive FPC.

Screw<H>: XYN2+J4FN

7 - 1

7. Wiring Connection Diagram

MINI-PCI(FOR LAN)

MINI-PCI(FORMODULAR)

JK602 JK601MODULAR LAN

LCD

CN801

CN802SW801

CN

602

CN60

1

CN

603

COM PCB

INVERTER PCB

POWER

FAN

CN5 CN4VGA

CN16 CN17

CN10

CN11

CN12

HDD

CN704

CN703

KEY-BOARDCD-ROMDRIVE

INTERNALSERIAL

MINI-PCITYPE3

MAIN BATTERY

CN702

MIC

HEAD-PHONE

PC CARDSLOT

SERIAL PORTCN3 CN2

CN20JK1

DC-IN

CN6

CN13

FDD SDD

CN503 CN501

PORTREPLICATOR

TOUCHPAD

DIMMCARD

CN1PARALLEL PORT USB

PS2/MOUSE

CN19

SPEAKER(RIGHT)

SPEAKER(LEFT)

LED PCB

PAD PCBI/F PCB

MAIN PCB

CN

22C

N7

CN

14

CN

8

CN

9

JK70

1

CN70

7

CN

701

CN70

5

JK70

2

8 - 1

8. Exploded View

E8

E10E11

K205

K121

K205

K17

B

A

E4E15

K85

K122

K205

K221

K124

K97

K93

K98

K7

K218

K100

K216

K218

K98

K94

K205

K5 K205

K92

K89

K205

K99

K221

E1

E5

E27

K219

K217

K21

K219

K107

BT1

K217

E11

K113

K118

K112

K113

K19

K108

K113K113

K102

K116

K1

K1

K36E2

K211

K8

K86

K211

K16

K14

K90

K12

K115

K120

K215

K123

K215

K23

K10

CCN9-1

E

E

E

E

E

E

E

F

A

A

A

B

B

A

FF

C

C

C

F

F

F

Screw tightening torqueA 0.18 ± 0.02N·m (1.8 ± 0.2kgf·cm)B 0.22 ± 0.02N·m (2.2 ± 0.2kgf·cm)C 0.44 ± 0.05N·m (4.5 ± 0.5kgf·cm)E 0.27 ± 0.02N·m (2.8 ± 0.2kgf·cm)F 0.44 ± 0.049N·m (4.5 ± 0.5kgf·cm)

8 - 2

B

A

C

K41

K2

K2

K206

K40

K206

K34K204K27

K20

K41

K206

K44

K4

K44K4

K222

K206

K222

K206

K22

K75

K18

K73

K15

K35

K206

K114

K27

K206

K206

K104

K202

K204

K32

K27

K74

K69

K70

K70K68

K211

K211

K208K208

E15

E14

E22

K222

K37

K27K38

K13

K125

K47

K115

E21

K72

K75

E20

K211

K206

K35

K15

K117

E30

Screw tightening torqueA 0.18 ± 0.02N·m (1.8 ± 0.2kgf·cm)E 0.27 ± 0.02N·m (2.8 ± 0.2kgf·cm)F 0.441 ± 0.049N·m (4.5 ± 0.5kgf·cm)

E

F

F

F

FF

E

A

A A

A

A

A

A

A

F

F

F

F

F

8 - 3

K111

K42

E6

E12 E13

K206

K11

K206

K31

K101

K206

K45

K51

K26

K206

K28

E28

K24

K46

K206

K39

K43

K33

K28

K45

K26

E9

K206

K3

K206

E29

K6

K206

K206K9

K203K203

K206Screw tightening torqueC 0.44 ± 0.05N·m (4.5 ± 0.5kgf·cm)D 0.31 ± 0.02N·m (3.2 ± 0.2kgf·cm)E 0.27 ± 0.02N·m (2.8 ± 0.2kgf·cm)

E

E

E

E

C

C

DD

E

EE

8 - 4

K65

E18

K211

K60

K55

K201

K201

K201

K207

K52K211

K53E17

K57

K57

K57

K57

K67

K59

K210

K119

K119

K210

K50

E16

K119

K210

K209

K56

K209

E19

K209

K61

K64

K48

K58

K209

K209

K209

K210

K119

K49

K209

K58

K63

K63

Screw tightening torqueA 0.18 ± 0.02N·m (1.8 ± 0.2kgf·cm)E 0.27 ± 0.02N·m (2.8 ± 0.2kgf·cm)F 0.441 ± 0.049N·m (4.5 ± 0.5kgf·cm)

E

F

F

A

A

EE

E

E

E

E

A

A

EE

F

F

9 - 1

9. Replacement Parts List (Main Block Unit, Mechanical Parts, Accessories and Packing Materrial)

REF. NO. and AREA PART NO. Q'TYMain Block UnitE 1 DL3U11111AAA PCB, MAIN (CF-48MxAxxxx) RTL 1E 1 DL3U11111BAA PCB, MAIN (CF-48NxFxxxx) RTL 1E 2 DL3U21111AAA PCB, COM RTL 1E 4 DL3U11112AAA PCB, IF RTL 1E 5 DL3U21112AAA PCB, LED RTL 1E 6 DL3U31112AAA PCB, PAD RTL 1E 8 DFWP0132ZA CARD, MODEM, MINI PCI 1E 9 L0AA03A00011 SPEAKER WITH CABLE 1E 10 DFJS620ZA CABLE, MODEM 1E 11 DFJS622ZB CABLE, B, LAN 1E 12 DFJE9120ZA PAD, MAIN FF 1E 13 DFJE9135ZB FFC, PAD SW 1E 14 N3DAA1A00002 DRIVE, CD-ROM (CF-48xxxAxxx) 1E 14 (M) DFWV78A0120 DRIVE, DVD-ROM (CF-48xxxBxxx),Region cod 1 1E 14 (E,F,G,S,T,P) DFWV78A0121 DRIVE, DVD-ROM (CF-48xxxBxxx),Region cod 2 1E 15 DLCR0148A01A FPC, CD-ROM 1E 16 L5BDD3Q00003 LCD, 14.1" (CF-48x4xxxxx) 1E 16 L5BDDDQ00001 LCD, 13.3" (CF-48x3xxxxx) 1E 17 ECXF6314E PCB, INVERTER 1E 18 DFJS617ZA CABLE, INVERTER 1E 19 DFJS618ZA CABLE, SIGNAL, LCD (CF-48x4xxxxx) 1E 19 DFJS619ZA CABLE, SIGNAL, LCD 13 (CF-48x3xxxxx) 1E 20 DFJG065ZA-T FDD 1E 21 DFJE9119ZA FFC, F 1E 22 N3CABND00005 HDD, 10GB (CF-48xxAxxxx) 1E 22 N3CABPD00002 HDD, 20GB (CF-48xxFxxxx) 1E 27 UDQFFDH01 FAN 1E 28 (M) DFSX1A71UATG KEYBOARD (US) 1E 28 (E) DFSX1A72UATG KEYBOARD 1E 28 (F) DFSX1A74UATG KEYBOARD 1E 28 (G) DFSX1A73UATG KEYBOARD 1E 28 (S) DFSX1A76UATG KEYBOARD 1E 28 (T) DFSX1A75UATG KEYBOARD 1E 28 (P) DFSX1A95UATG KEYBOARD 1E 29 N2EAEFD00001 TOUCH PAD 1E 30 DFJS308YA 48HDD_CABLE 1AccessorieA 1 CF-AA1639AM1 AC ADAPTER 1A 2 (M) DFJA0047ZAKK CABLE, AC 1A 3 DFJS535ZA CABLE, TELEPHONE, MODEM 1A 4 N4HUNSA00002 BATTERY PACK 1A 5 DFQX5082ZAT OPERATING INSTRUCTION 1A 5 (E,F,G,S,T,P) 1

Note: Important Safety Notic Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts.

DESCRIPTION

Note: About the parts which written " * " above, please order to Computer Products Europe (CPE) written below. Matsushita Electric (U.K.) Ltd. Computer Products Europe (CPE) TEL: +44-1222-736060 FAX: +44-1222-735500

*OPERATING INSTRUCTION MANUAL

9 - 2

REF. NO. and AREA PART NO. Q'TYPacking MaterialP 1 DFPN9110ZAT CUSHION (COUPLE) 1P 2 DFPK1052ZAT PACKING CASE 1Mechanical PartsK 1 DFUN0056ZA SPRING, COVER, PORT RE 2K 2 DFUN0048ZA SPRING, IC CARD 2K 3 DFUQ0077ZA SPRING, BUTTON, POWER 1K 4 DFUQ0078ZA SPRING, LOCK, COVER 2K 5 DFMD7703ZA GUIDE, FDD 1K 6 DFMD7704ZA PLATE, JOINT, BASE 1K 7 DFMD7705ZA SUPPORT L, TILT 1K 8 DFMD7706ZA SUPPORT R, TILT 1K 9 DFMD7707ZA PLATE, PAD 1K 10 DFMD7741ZA ANGLE, PCB, SUB 1K 11 DFMC0632ZA PLATE, SHIELD, TOP 1K 12 DFMC0633ZA PLATE, SHIELD, TOP, HDD 1K 13 DFMC0634ZA SHIELD, HDD PLATE, BOTTOM 1K 14 DFMC0636ZA SHIELD, CDD 1K 15 DFMC0643ZA COVER, SHIELD MEMORY 2K 16 DFMC0644ZA COVER, SHIELD, MODULER 1K 17 DFMC0649ZA PLATE U, SHIELD, BATTERY 1K 18 DFMC0650ZA PLATE B, SHIELD, BATTERY 1K 19 DFMC0652YA EARTH PLATE, PORT RE 2 1K 20 DFMC0653ZA PLATE, EARTH, BATTERY 1K 21 DFMC0656ZA SPRING, EARTH, LCD 1K 22 DFMC0657ZA PLATE2, SHIELD, HDD 1K 23 DFMC0667ZA EARTH, I/O PLATE 1K 24 DFMX0853ZA SHEET, BLIND, FAN 1K 26 DFHG1402ZA RUBBER, HOLD, SPEAKER 2K 27 DFHG362ZA-0 RUBBER, FOOT 4K 28 DFHG781ZAT RUBBER, KBD 2K 31 DFKM0371ZB-0 CASE, TOP 1K 32 DFKF0213ZA-0 CASE, BOTTOM 1K 33 DFKE0549ZA-0 COVER, KBD (Deposit with LED Lens(K46).) 1K 34 DFKE0550ZA-0 BLIND, MODULER 1K 35 DFKE0552ZA-0 COVER, MEMORY 2K 36 DFKE0555ZA-0 COVER, PORT RE 2K 37 DFKE0556ZA-0 COVER, BATTERY 1K 38 DFKE0557ZA-0 COVER, HDD 1K 39 DFGK0125ZA SHEET, LENS, LED 1K 40 DFGL0089ZA-0 LENS, LED, FRONT 1K 41 DFGE0025ZB-1 COVER, IC CARD 2K 42 DFBC0252ZA-0 BUTTON, PAD 1K 43 DFBC0253ZA-0 BUTTON, POWER 1K 44 DFBD0135ZA-0 LOCK, COVER 2K 45 DFHR5817ZA-0 HOLDER, SPEAKER 2K 46 DFGL0090ZA-0 LED LENS,BIHIND (Deposit with KBD Cover(K33).) 1K 47 DFMD7498ZA PLATE, CD-ROM 1K 48 DFUW0074YA SPRING, LOCK LCD 1K 49 DFMD7708ZA PLATE L, LCD 1K 50 DFMD7709ZA PLATE R, LCD (CF-48x4xxxxx) 1K 50 DFMD7720ZA PLATE R, LG, LCD 13 (CF-48x3xxxxx) 1K 51 DFKE8140ZA ASS'Y, COVER, KBD 1K 52 DFMC9038ZA ASS'Y, PLATE, EARTH, LCD 1K 53 DFMX0839ZA ISOLATION, INVERTER 1K 55 DFBH1113ZA TILT L 1

DESCRIPTION

9 - 3

REF. NO. and AREA PART NO. Q'TYK 56 DFBH1114ZA TILT R 1K 57 DFHG804ZA SPACER, LCD 4K 58 DFHG799ZA RUBBER, LCD 2K 59 DFHE0424ZA GASKET 1K 60 DFKM9015ZA-0 ASS'Y, COVER, REAR, LCD 1K 61 DFKE0547ZA-0 BEZEL, FRONT, LCD 13 (CF-48x3xxxxx) 1K 61 DFKE0548ZA-0 BEZEL, FRONT, LCD 14 (CF-48x4xxxxx) 1K 63 DFGX0283ZA-0 SHEET, SCREW, LCD 2K 64 DFBD0134ZA-0 LOCK, LCD 1K 65 DFHR5849ZA-0 CLAMP CABLE, LCD 1K 67 DFHR7658ZA TAPE, CON, LCD 14 (CF-48x4xxxxx) 1K 67 DFHR7666ZB SHEET, CON, LCD 13 (CF-48x3xxxxx) 1K 68 DFMD7702ZA PLATE, FDD 1K 69 DFHE0430ZA GASKET 1K 70 DFKE0554ZA-0 SPACER, BEZEL, FDD 2K 72 DFMC0635ZA CASE, HDD 1K 73 DFMC0658ZA COVER, CASE, HDD 1K 74 DFMX0874ZA SHEET, ISO, HDD 1K 75 DFHG774ZA DUMPER, HDD 2K 85 DFMC0668ZA SHEET, SHIELD MINI PCI 1K 86 DFMC9037ZA ASSY, IO PLATE 1K 89 DFMX0837ZB SHEET, ISOLATION, FDD 1K 90 DFMX0873ZA SHEET, ISO, MODULER 1K 92 DFMY0248ZA SHEET, H/SINK, CPU 1K 93 DFMY3093ZA PLATE, CPU, TOP (BGA) 1K 94 DFMY3094ZA PLATE, CPU, BOTTOM (BGA) 1K 97 DFMY3097ZA HEAT SINK, BGA, CPU 1K 98 DFDF3132ZA SPACER, H/SINK 3K 99 DFDF3137ZA SHAFT, SPACER 1K 100 DFHE0427ZA GASKET 1K 101 DFHE0428ZA GASKET 1K 102 DFHE0429ZA GASKET 1K 104 (E,F,G,S,T,P) DFGT0815ZA RATING LABEL (EU) 1K 104 (M) DFGT0814ZA RATING LABEL (US) 1K 107 DFMX0854ZA RTC BATTERY ISO SHEET 1K 108 DFMX0862ZA PCMCIA ISO SHEET 1K 111 DFQT6174ZB LABEL, HIGH TEMPERATURE 1K 112 DFHG806ZA CUSHION, SHIELD, CD 1K 113 DFHE0446ZA GASKET 4K 114 DFHE0447ZA GASKET 3K 115 DFHE0448ZA GASKET 2K 116 DFHR7926ZA SHEET, SHIELD, HDD 1K 117 DFMC0522ZA TAPE, CU, LCD (CF-48xxxAxxx) 1K 118 DFMC0522ZA TAPE, CU, LCD 1K 119 DFHR7924ZA SHEET, PLT, LCD (CF-48x4xxxxx) 4K 120 DFMC0673ZA TAPE, CU, SHIELD 1K 121 DFMC0679ZA TAPE, SHIELD, PCI 1K 122 DFMX0878ZA SHEET, PCI 1K 123 DFHG805ZA SPACER, EARTH, HDD 1K 124 DFMX0877ZA ISOLATION, DIMMSOKET 1K 125 DFWV99A0048 HDD Mounting Kit for Support 1K 201 XYN26+J4 SCREW 3K 202 XYN26+J8FZ SCREW 1K 203 XTB2+6G SCREW 4K 204 XTB26+10GFZ SCREW 2K 205 XTB26+8G SCREW 6

DESCRIPTION

9 - 4

REF. NO. and AREA PART NO. Q'TYK 206 DXSB26+4FZMT SCREW 18K 207 DXSN26+25MT SCREW 1K 208 XYN2+J4FN SCREW 2K 209 DXHM0009XB SCREW 7K 210 DXQT2+D2L SCREW (CF-48x3xxxxx) 4K 210 DFHE5122ZA SCREW (CF-48x4xxxxx) 4K 211 DFHE5121YA SCREW 7K 215 XYN2+J6 SCREW 2K 216 XYN25+J5FZ SCREW 2K 217 IKT0104AA SCREW 6K 218 DXHM0009XA SCREW 2K 219 DXSB26+4FZMT SCREW 2K 221 XYN2+J6 SCREW 4K 222 XYN2+J4FN SCREW 3

Note: Deposit the LED lens (K46) to the KBD cover (K46).

DESCRIPTION

9 - 5

REF. NO. and AREA PART NO. DESCRIPTION Q'TYMain PCBBT 1 ! CR2032 RTC BATTERY 1C 2 446 447 448 449 EEFCD0D101R CAPACITOR, 2V, 100�F 5C 3 4 EEFCD0D101R CAPACITOR, 2V, 100�F 2C 8 9 12 16 18 20 21 2325 26 28 33 34 35 37 3839 40 42 43 44 52 55 5761 75 77 81 95 97 100 103104 110 125 137 143 145153 154 162 177 194 197202 205 206 207 208 213246 247 249 268 293 302309 315 368 388 413 414417 421 458 459

ECUV1E104ZFV CAPACITOR, 25V, 0.1�F 66

C 14 32 41 72 76 80 84276 306 308 310 416 422

DCUJ1A105ZFL CAPACITOR, 10V, 1�F 13

C 15 24 30 36 58 70 74 7882 297 386 406 407 408423 436

DCUJ1A105ZFL CAPACITOR, 10V, 1�F 16

C 19 45 47 50 53 67 69 8593 99 111 112 115 116117 122 124 127 131 133134 141 142 147 150 152155 160 164 166 171 174192 209 210 211 212 229230 231 233 234 239 250251 253 254 260 261 264265 272 274 316 323 351379 380 381 382 384 385387 395 405 426 429 430433 434 466 467

ECUV1E104ZFV CAPACITOR, 25V, 0.1�F 72

C 27 168 169 232 248 312 ECUV1H101JCV CAPACITOR, 50V, 100pF 6C 46 186 ECUV1H470JCV CAPACITOR, 50V, 47pF 2C 54 DCS0GTA221M CAPACITOR, 4V, 220pF 1C 62 215 ECUV1H150JCV CAPACITOR, 50V, 15pF 2C 64 300 301 ECST1AX226R CAPACITOR, 10V, 22�F 3C 66 DCS1AN336CE CAPACITOR, 10V, 33�F 1C 89 193 352 353 354 355356 357 358 359 463 464

ECUV1H101JCV CAPACITOR, 50V, 100pF 12

C 91 94 330 331 332 333338 341 342 343 344 347348 399 403


C 108 129 130 138 148167 172 184 227 273 327360 361 362 363 364 365366 367 410


C 113 183 191 195 445 DCUE1C106MBY CAPACITOR, 16V, 10�F 5C 121 175 179 180 181305

ECUV1H103KBV CAPACITOR, 50V, 0.01�F 6

C 126 128 178 190 258259 262 457 460461 462

DCUC1A106ZFY CAPACITOR, 10V, 10�F 11

CF-48 Electrical Replacement Parts List

9 - 6

REF. NO. and AREA PART NO. DESCRIPTION Q'TYC 132 139 140 144 149151 185 267 373 374 375

ECUV1C224ZFV CAPACITOR, 16V, 0.22�F 13

C 156 228 409 411 ECUV1H102JCV CAPACITOR, 50V, 1000pF 4C 161 176 244 263 DCUC1A106ZFY CAPACITOR, 10V, 10�F 4C 163 ECUV1H680JCV CAPACITOR, 50V, 68pF 1C 170 ECUV1H472KBV CAPACITOR, 50V, 4700pF 1C 182 236 275 339 340349 350 431 437

ECUV1C105ZFX CAPACITOR, 16V, 1�F 9

C 187 418 424 438 439 ECUV1H103KBV CAPACITOR, 50V, 0.01�F 5C 188 390 415 425 ICUV1C475ZFX CAPACITOR, 16V, 4.7�F 4C 189 ECUV1H331JCV CAPACITOR, 50V, 330pF 1C 200 201 ECUV1H080DCV CAPACITOR, 50V, 8pF 2C 203 204 ECST0JC476R CAPACITOR, 6.8V, 47�F 2C 214 216 218 255 378 ECUV1H100DCV CAPACITOR, 50V, 10pF 5C 221 224 252 266 320321 322


C 225 226 ECUV1H220JCV CAPACITOR, 50V, 22pF 2C 240 241 242 243 277292 369 370 371 372 427428


C 245 ECUV1H222KBV CAPACITOR, 50V, 2200pF 1C 269 270 271 ECUV1H471JCV CAPACITOR, 50V, 470pF 3C 294 295 296 299 303317


C 304 DCUE1C106ZFY CAPACITOR, 16V, 10�F 1C 307 ECUV1C105ZFX CAPACITOR, 16V, 1�F 1C 311 ICUV1C475ZFX CAPACITOR, 16V, 4.7�F 1C 313 419 DCUE1C106MBY CAPACITOR, 16V, 10�F 2C 314 EEVFC1C470P CAPACITOR, 16V, 47�F 1C 318 319 ECUV1H080DCV CAPACITOR, 50V, 8pF 2C 325 326 DCUC0J106KBY CAPACITOR, 6.3V, 10�F 2C 334 335 336 337 401402


C 345 ECUV1H681JCV CAPACITOR, 50V, 680pF 1C 346 ECUV1H681JCV CAPACITOR, 50V, 680pF 1C 377 ECUV1H100DCV CAPACITOR, 50V, 10pF 1C 389 392 EEVHA0J470R CAPACITOR, 6.8V, 47�F 2C 391 ECST1CX106R CAPACITOR, 16V, 10�F 1C 394 ECST1CD476R CAPACITOR, 16V, 47�F 1C 396 ECUV1H471JCV CAPACITOR, 50V, 470pF 1C 397 398 400 ECUV1H330JCV CAPACITOR, 50V, 33pF 3C 420 ECST1AY106R CAPACITOR, 10V, 10�F 1C 441 DCS1AP107DE CAPACITOR, 10V, 100�F 1C 444 ECUV1H680JCV CAPACITOR, 50V, 68pF 1C 450 451 452 DCS1AP107DE CAPACITOR, 10V, 100�F 3C 453 454 455 DCS0JP157DE CAPACITOR, 6.3V, 150�F 3C 469 DCUC1A226ZFY CAPACITOR, 10V, 22�F 1CN 1 DFJS454ZA006 CONNECTOR, FOR EXT.KB(PS/2) 1CN 2 DFJS587ZA008 CONNECTOR, FOR SUB RECEPTACLE 1CN 3 DFJS452YA025 CONNECTOR, FOR PARALLEL PORT 1CN 4 DFJP191YA009 CONNECTOR, FOR SERIAL PORT 1CN 5 DFJS453YA015 CONNECTOR, FOR VGA 1CN 6 DFJS553ZA100 CONNECTOR, FOR PORT REPLICATOR 1CN 7 DFJS451ZA144 CONNECTOR, FOR DIMM (RAM CARD) 1

9 - 7

REF. NO. and AREA PART NO. DESCRIPTION Q'TYCN 8 K3ZZ12400001 CONNECTOR, FOR, MINI- PCI (TYPE 3) 1CN 9 K1NBF4Z00001 CONNECTOR, FOR PCMCIA 1CN 9 K1MMF4A00001 CONNECTOR, FOR CARD BUS EJECTOR 1CN 10 DFJP216ZA008 CONNECTOR, FOR MAIN BATTERY 1CN 11 K1KAC0A00032 CONNECTOR, FOR SUB PCB I/F 1CN 12 DFJP50C96ZA CONNECTOR, FOR HDD I/F 1CN 13 DFJS085YA026 CONNECTOR, FOR FDD I/F 1CN 14 FH12-50S05SV CONNECTOR, FOR SDD I/F 1CN 16 DFJS310ZA005 CONNECTOR, FOR BACKLIGHT I/F 1CN 17 DFJP112ZA020 CONNECTOR, FOR LCD I/F 1CN 19 DFJS310ZA002 CONNECTOR, FOR FAN (CPU) 1CN 20 DFJP131ZA020 CONNECTOR, FOR LED I/F 1CN 22 K1MP06B00011 CONNECTOR, FOR COM PCB 1D 1 7 8 33 MA729-TX DIODE 4D 2 5 MA729-TX DIODE 2D 3 4 6 DEDDA204UT DIODE 3D 9 20 22 DEDSFPB64V DIODE 3D 10 16 24 DEDRB715FT7 DIODE 3D 11 DEDRB411DT47 DIODE 1D 12 13 14 DEDDA204UT DIODE 3D 15 17 34 DEDAP202UT7 DIODE 3D 18 DEDRB420DT97 DIODE 1D 19 DEDASFPA73V DIODE 1D 21 35 DEDAP202UT7 DIODE 2D 23 DEDUDZ9R1BT DIODE 1D 25 26 DEDRB081L20 DIODE 2D 27 DEDUDZ18BT DIODE 1D 28 DEDUDZ6R2BT DIODE 1D 29 DEDUDZ6R2BT DIODE 1D 30 DEDUDZ5R1BT DIODE 1D 31 DEDUDZ4R7BT DIODE 1D 32 DED03P2JT1-D DIODE 1F 1 XBAD4516R30L FUSE (6.3) 1F 2 3 XBADMMCT010U FUSE (1A) 2IC 2 C1DB00000578 IC, TEMPERATURE SENSOR 1IC 3 DAW82443BXCI IC, 443BX 1IC 4 DA9714DYBX3A IC, CLOCK 1IC 5 6 7 8 DASM716FTL80 IC,SD RAM 4IC 9 10 11 12 DASM716FTL80 IC, SD RAM (CF-48xxFxxxx) 4IC 13 DAFW82371M-I IC, PIIX4 1IC 14 C1DB00000524 IC, VGA CONTROLLER 1IC 15 DA7SH32U85L0 IC, OR GATE 1IC 16 C0DBEHG00002 IC, REGULATOR 1IC 17 IDTFST3125Q IC, BUFFER 1IC 19 DARB5C4782BR IC, FOR PC CARD CONTROLLER 1IC 21 DA2563A1SX2V IC, REGULATOR 1IC 22 C1DB00000475 IC, GCL 1IC 23 DA97338VJG-N IC, SUPER I/O 1IC 24 DA7S04FT85L0 IC, INVERTER 1IC 25 ADM211EARSRL IC, BUFFER 1IC 26 DA38802M280M IC, MICOM (8 BITS) FOR KBC 1IC 27 TVHC32FTL IC, OR GATE 1IC 28 31 53 DA7SH08U85L0 IC, AND GATE 3

9 - 8

REF. NO. and AREA PART NO. DESCRIPTION Q'TYIC 29 DA7SH32U85L0 IC, OR GATE 1IC 30 C1DB00000512 IC, SOUND 1IC 32 C0DBZHG00004 IC, USB, POWER CONTROLER 1IC 33 C1DB00000536 IC, SOUND AMP 1IC 34 DALP298050N IC, REGULATOR 1IC 35 DAM2904MT1-P IC, OP AMP 1IC 36 37 DA7ST08U85L0 IC, AND GATE 2IC 38 DAPST9140NXT IC, REGULATOR 1IC 39 40 DAPST9125NXT IC, REGULATOR 2IC 41 42 DA7W14UT12L0 IC, INVERTER 2IC 43 DAM2370R121P IC, REGULATOR (12V) 1IC 44 C1DB00000534 IC, VM1 1IC 45 DAB664ETBX3A IC, CLOCK BUFFER 1IC 46 C0DBEZG00006 IC, REGULATOR (VCT) 1IC 47 XC62FP2502PR IC, REGULATOR (VC25) 1IC 48 DA7S14FT85L0 IC, INVERTER 1IC 49 56 DA7S14FT85L0 IC, INVERTER 2IC 50 DA39VF04CX2I IC, FLASH ROM (BIOS) 1IC 51 DA7S32FT85L0 IC, OR GATE 1IC 52 DAF3434T000H IC, EC 1IC 54 DALP298030N IC, REGULATOR 1IC 55 DA7W02UT12L0 IC, NOR GATE 1IC 57 C0DBAFH00005 IC, REGULATOR (VC1) 1IC 58 C0DBAZZ00039 IC, REGULATOR (VB5,VA3) 1IC 59 XC62FP2502PR IC, REGULATOR 1JK 1 DFJJB3Z07ZAH JK,DC IN 1L 1 DDAZR4R7KT2L COIL, 4.7mH 1L 3 4 DDB5Z005-L FERRITE BEAD 2L 5 6 10 11 23 26 32 33 3435 36 38

DDB5Z034B-Y FERRITE BEAD 12

L 7 8 9 24 37 39 DDB5Z034B-Y FERRITE BEAD 6L 12 17 18 DDB5Z005-L FERRITE BEAD 3L 15 16 DDB5Z031I-L FERRITE BEAD 2L 20 25 41 DDB5Z031J-L FERRITE BEAD 3L 21 DDB5Z028C-L FERRITE BEAD 1L 22 DDB5Z031J-L FERRITE BEAD 1L 27 DDAZS100MTZ8 COIL, 10mH 1L 28 DDAZZ100MT-T COIL, 10mH 1L 29 G1C1R1MA0028 COIL, 1.1mH 1L 31 G0A330H00006 COIL, 33mH 1PS 1 2 ERY32SA120VA POLY SW (1.2A) 2Q 1 DAFDS6670A TRANSISTOR 1Q 2 DA3LN01STL TRANSISTOR 1Q 3 2SK1582T2 TRANSISTOR 1Q 4 9 44 45 66 68 71 DETC114YETL TRANSISTOR 7Q 5 10 14 15 17 19 31 3342 46 52 53 54 55 56 5773 78

DETC114YETL TRANSISTOR 18

Q 6 21 27 29 30 32 DETA114EETL TRANSISTOR 6Q 11 34 36 41 43 74 DETA144EETL TRANSISTOR 6Q 12 DASI4410DYTA TRANSISTOR 1Q 16 2SJ187TD TRANSISTOR 1Q 18 DA3LN01STL TRANSISTOR 1Q 22 23 24 26 28 DETA114EETL TRANSISTOR 5

9 - 9

REF. NO. and AREA PART NO. DESCRIPTION Q'TYQ 35 37 38 39 DAFDN359AN TRANSISTOR 4Q 47 48 59 DETA144EETL TRANSISTOR 3Q 49 DASI4410DYTA TRANSISTOR 1Q 50 51 DAFDS6912A TRANSISTOR 2Q 58 DAFDS6690A TRANSISTOR 1Q 60 DAFDS6670A TRANSISTOR 1Q 61 2SK1582T2 TRANSISTOR 1Q 62 72 DASI4435DYTA TRANSISTOR 2Q 63 DAUPA1700AE2 TRANSISTOR 1Q 64 DAUPA1700AE2 TRANSISTOR 1Q 65 DAFDS6912A TRANSISTOR 1Q 67 77 DETC144EETL TRANSISTOR 2Q 69 DETUMG2NTR TRANSISTOR 1Q 70 DASI9435DYT2 TRANSISTOR 1R 1 12 16 21 22 74 226227 232 260 261 357 386411 417

ERJ3GEYJ102V RESISTOR, 1/16W, 1K� 15

R 2 3 134 141 200 221415 416 422 469


R 4 7 187 188 189 190209 219 239 240 242

ERJ3GEYJ330V RESISTOR, 1/16W, 33� 11

R 5 ERJ3EKF1100V RESISTOR, 1/16W, 110� 1R 9 54 137 148 149 150151 152 153 154 160 216217 218 220 222 224 225229 279 291 418 419 420421 455 456

ERJ3GEY0R00V RESISTOR, 1/16W, 0� 27

R 10 ERJ3EKF56R2V RESISTOR, 1/16W, 56.2� 1R 15 18 19 ERJ3GEYJ510V RESISTOR, 1/16W, 51� 3R 23 47 ERA3YED152V RESISTOR, 1/16W, 1.5K� 2R 24 48 483 ERA3YED102V RESISTOR, 1/16W, 1K� 3R 25 484 ERA3YED202V RESISTOR, 1/16W, 2K� 2R 26 130 ERA3YED202V RESISTOR, 1/16W, 2K� 2R 27 28 115 116 ERJ3GEYJ151V RESISTOR, 1/16W, 150� 4

R 29 30 32 38 42 49 50 5157 59 61 119 124 127 163164 179 295 296 305 306374 424 475 482


R 31 85 412 414 ERJ3GEYJ562V RESISTOR, 1/16W, 5.6K� 4R 34 56 104 105 168 175178 181 257 281 331 365366 457 458 470


R 39 44 62 63 64 78 98 99125 158 169 171 184 186262 263 275 276 304 308434 451 459 460


R 43 68 389 390 403 404 DBJ14RR047VM RESISTOR, 1/4W, 0.047� 6R 45 46 253 267 ERJ3GEYJ180V RESISTOR, 1/16W, 18� 4R 60 ERA3YKD683V RESISTOR, 1/16W, 68K� 1R 65 DBJ8GF0R10VM RESISTOR, 1/8W, 0.1� 1R 66 113 ERJ3EKF3600V RESISTOR, 1/16W, 360� 2R 67 ERJ3EKF56R2V RESISTOR, 1/16W, 56.2� 1R 69 ERJ3GEYJ271V RESISTOR, 1/16W, 270� 1

9 - 10

REF. NO. and AREA PART NO. DESCRIPTION Q'TYR 70 73 75 84 112 201202 266 358 446


R 72 90 111 ERJ3GEYJ152V RESISTOR, 1/16W, 1.5K� 3R 77 103 208 264 274 302303 307 433 449


R 79 173 473 ERJ3GEYJ220V RESISTOR, 1/16W, 22� 3R 80 268 269 270 ERJ3GEYJ220V RESISTOR, 1/16W, 22� 4R 82 161 ERJ3GEYJ100V RESISTOR, 1/16W, 10� 2R 83 108 427 428 ERJ6GEY0R00V RESISTOR, 1/10W, 0� 4R 86 91 95 96 97 142 156157 330 406 407


R 87 283 284 285 ERJ3GEYJ333V RESISTOR, 1/16W, 33K� 4R 100 102 110 144 DDB5Z034B-Y FERRITE BEAD 4R 101 139 ERJ3GEYJ471V RESISTOR, 1/16W, 470� 2R 114 ERJ3GEYJ681V RESISTOR, 1/16W, 680� 1R 117 238 246 249 250278


R 118 345 ERJ3GEYJ221V RESISTOR, 1/16W, 220� 2R 120 121 122 293 328344

ERJ3GEYJ472V RESISTOR, 1/16W, 4.7K� 6

R 128 ERJ3GEYJ152V RESISTOR, 1/16W, 1.5K� 1R 126 129 211 212 213214


R 131 ERA3YED103V RESISTOR, 1/16W, 10K� 1R 132 ERJ3GEYJ153V RESISTOR, 1/16W, 15K� 1R 133 361 ERJ3GEYJ223V RESISTOR, 1/16W, 22K� 2R 135 199 256 265 272294 321 322 323


R 140 ERJ3GEYJ4R7V RESISTOR, 1/16W, 4.7� 1R 143 ERJ3GEYJ331V RESISTOR, 1/16W, 330� 1R 155 258 259 277 ERJ3GEYJ104V RESISTOR, 1/16W, 100K� 4R 162 ERJ3GEYJ333V RESISTOR, 1/16W, 33K� 1R 180 247 282 ERJ3GEYJ105V RESISTOR, 1/16W, 1M� 3R 197 ERJ3GEYJ106V RESISTOR, 1/16W, 10M� 1R 198 ERJ3GEYJ154V RESISTOR, 1/16W, 150K� 1R 203 204 205 206 ERJ3GEYJ270V RESISTOR, 1/16W, 27� 4R 228 230 231 ERJ3GEYJ330V RESISTOR, 1/16W, 33� 3R 233 474 ERJ3GEYJ562V RESISTOR, 1/16W, 5.6K� 2R 245 370 371 372 373 ERJ3GEYJ105V RESISTOR, 1/16W, 1M� 5R 254 297 311 ERJ3GEYJ222V RESISTOR, 1/16W, 2.2K� 3R 271 287 292 298 408 ERJ3GEYJ101V RESISTOR, 1/16W, 100� 5R 273 349 351 ERJ3GEYJ472V RESISTOR, 1/16W, 4.7K� 3R 299 301 309 ERJ3GEYJ222V RESISTOR, 1/16W, 2.2K� 3R 310 313 ERJ6ENF75R0V RESISTOR, 1/10W, 75.0� 2R 312 ERJ6ENF75R0V RESISTOR, 1/10W, 75.0� 1R 315 ERJ3GEYJ332V RESISTOR, 1/16W, 3.3K� 1R 316 333 ERA3YED201V RESISTOR, 1/16W, 200� 2R 317 318 ERJ3GEYJ474V RESISTOR, 1/16W, 470K� 2R 319 ERJ3GEYJ224V RESISTOR, 1/16W, 220K� 1R 326 327 ERJ3GEYJ224V RESISTOR, 1/16W, 220K� 2R 335 ERJ3GEYJ271V RESISTOR, 1/16W, 270� 1R 336 ERA3EED4991V RESISTOR, 1/16W, 4990� 1R 337 DBJ14RR033VM RESISTOR, 1/4W, 0.033� 1R 346 ERA3YKD154V RESISTOR, 1/16W, 150K� 1

9 - 11

REF. NO. and AREA PART NO. DESCRIPTION Q'TYR 347 ERJ3GEYJ221V RESISTOR, 1/16W, 220� 1R 348 ERJ3GEYJ621V RESISTOR, 1/16W, 620� 1R 350 ERA3YED333V RESISTOR, 1/16W, 33K� 1R 352 353 356 360 ERJ6GEYJ101V RESISTOR, 1/10W, 100� 4R 359 ERJ3GEYJ3R3V RESISTOR, 1/16W, 3.3� 1R 362 363 413 ERJ6GEYJ222V RESISTOR, 1/10W, 2.2K� 3R 364 ERJ3GEYJ474V RESISTOR, 1/16W, 470K� 1R 375 ERA3YED203V RESISTOR, 1/16W, 20K� 1R 376 ERA3YED152V RESISTOR, 1/16W, 1.5K� 1R 377 ERA3YED333V RESISTOR, 1/16W, 33K� 1R 379 380 381 382 383 DBJ14RR022VM RESISTOR, 1/4W, 0.022� 5R 388 DBJ14RR068VM RESISTOR, 1/4W, 0.068� 1R 435 436 ERA3YED103V RESISTOR, 1/16W, 10K� 2R 437 ERJ3GEYJ561V RESISTOR, 1/16W, 560� 1R 450 ERJ6GEYJ1R0V RESISTOR, 1/10W, 1.0� 1RA 1 DEAC168J152C RESISTOR ARRAY, 1.5K� 1RA 2 3 4 5 6 74 DEAYC164JR00 RESISTOR ARRAY, 0� 6RA 7 8 9 10 11 12 13 1415 16 17 18 19 20 21 22

DEAYC164J180 RESISTOR ARRAY, 18� 16

RA 23 DEAYC164J473 RESISTOR ARRAY, 47K� 1RA 24 DEAYC164J104 RESISTOR ARRAY, 100K� 1RA 25 26 27 30 31 32 3839 40 60 67 69 70

DEAC168J103C RESISTOR ARRAY, 10K� 13

RA 28 62 DEAYC164J102 RESISTOR ARRAY, 1K� 2RA 29 DEAYC164J472 RESISTOR ARRAY, 4.7K� 1RA 33 DEAC168J103C RESISTOR ARRAY, 10K� 1RA 34 DEAYC164J103 RESISTOR ARRAY, 10K� 1RA 35 49 50 52 61 DEAYC164J473 RESISTOR ARRAY, 47K� 5RA 36 73 DEAYC164J103 RESISTOR ARRAY, 10K� 2RA 37 41 44 45 46 48 5457 58 59 72

DEAYC164J330 RESISTOR ARRAY, 33� 11

RA 47 DEAYC164J472 RESISTOR ARRAY, 4.7K� 1RA 51 53 DEAC168J104C RESISTOR ARRAY, 100K� 2RA 55 56 DEAYC164J330 RESISTOR ARRAY, 33� 2RA 63 DEAYC164J220 RESISTOR ARRAY, 22� 1RA 64 65 DEAYC164J220 RESISTOR ARRAY, 22� 2RA 66 68 DEAC168J472C RESISTOR ARRAY, 4.7K� 2RA 71 DEAYC164J221 RESISTOR ARRAY, 220� 1SW 1 DFSS2B14ZAXN SW SLIDE 1X 1 IEV0399AA-K OSCILLATOR (14318.18KHz) 1X 2 DECU00032M1D OSCILLATOR (32.768KHz) 1X 3 DEBI8R00N1LX OSCILLATOR (8.00MHz) 1X 4 H0J491500006 OSCILLATOR (49.1520MHz) 1X 5 DEBI8R00N1LX OSCILLATOR (8.00MHz) 1COM PCBCN 601 DFJP173ZA002 CONNECTOR, FOR MINI-PCI 1CN 602 DFJP173ZA005 CONNECTOR, FOR MINI-PCI 1CN 603 K1MP06B00011 CONNECTOR, FOR MAIN 1D 602 D4ED1120A002 DIODE 1JK 601 K2LC108B0020 JK, FOR RJ11 (MODEM) 1JK 602 K2LB104B0019 CONNECTOR, FOR RJ45 (LAN) 1R 601 602 ERJ3GEYJ750V RESISTOR, 1/16W, 75� 2R 603 604 ERJ3GEY0R00V RESISTOR, 1/16W, 0� 2L 601 602 J0JCC0000092 BEAD CORE 2

9 - 12

REF. NO. and AREA PART NO. DESCRIPTION Q'TYPAD PCBC 501 DCUC1A106ZFY CAPACITOR, 10V, 10�F 1CN 501 DFJS208ZA008 CONNECTOR, FOR IF PCB 1CN 503 DFJS208ZA008 CONNECTOR, FOR Synaptics 1R 502 ERJ3GEY0R00V RESISTOR, 1/16W, 0� 1SW 501 502 EVQPLDA15 SW 2I/F PCBC 701 DCS1AP107DE CAPACITOR, 10V, 100�F 1C 702 703 ECUV1H470JCV CAPACITOR, 50V, 47pF 2C 705 711 713 ECUV1E104ZFV CAPACITOR, 25V, 0.1�F 3C 706 707 708 710 ECUV1H101JCV CAPACITOR, 50V, 100pF 4C 709 ECUV1C105ZFX CAPACITOR, 16V, 1�F 1C 714 ECUV1E104ZFV CAPPACITOR, 25V, 0.1�F 1CN 701 K1KBC0A00038 CONNECTOR, FOR MAIN PCB I/F 1CN 702 DFJS120ZA050 CONNECTOR, FOR CD-ROM 1CN 703 DFJS311ZA016 CONNECTOR, FOR KB2 1CN 704 DFJS311ZA013 CONNECTOR, FOR KB1 1CN 705 DFJS208ZA008 CONNECTOR, FIR 1CN 707 DFJS265ZA012 CONNECTOR, FOR INT. SERIAL I/F 1F 701 XBADMMCT020U FUSE (2A) 1JK 701 702 DFJJD6S10ZAG CONNECTOR, FOR MICROPHONE, HEADPHONE 2L 701 702 703 704 710711

DDB5Z021C-Y FERRITE BEAD 6

LD 701 SEC2764C LED 1LD 702 SEC1703C LED 1R 713 714 715 716 717718 719 720


LED PCBCN 801 DFJS319ZA020 CONNECTOR, FOR MAIN I/F 1LD 801 802 803 804 805806 807

SEC1703C LED 7

SW 801 EVQPLMA15 SW 1SW 802 K0L1BA000055 SW 1CN 802 K1KA04B00140 CONNECTOR, 1

panasonic cf-48 sm

Documents

Transcript of panasonic cf-48 sm