pallet racking-2-

14
PALLET RACKING INTRODUCTION

Transcript of pallet racking-2-

PALLET RACKING INTRODUCTION

Selective Pallet Racking is a cost effective storage system providing direct access to all pallets . It provides high capacity storage , is easily installed and Adjusted , and has low equipment and capital costs.

• Rapid handling of almost all types of palletised goods

• Pallets can be located , accessed and moved individually

• Maximises space use in any warehouse configuration while retaining optimum product accessibility

• Bottom level pallets can be stored on the floor, lowering structure costs

Safety Lock

Box Beam

Pallet Support Bar

Steel Decking Panel

Colum Guard

Comer Guard

Base Plate

Plywood

Pallet Back Stopper

Upright

Mesh Decking Panel

Row Spacer

Barrier

Compatible to Dexion Brand Pallet Racking(50/75/76.2 Pitch adjustment)

Uprights Section Size Available As Below:90*70mm(1.8/2.0/2.3),100*70mm(2.0/2.3/2.5)Height : All sizes available in 50/75/76.2 pitch.

Box Beams Section Size Available As Below Height:80mm/90mm/100mm/120mm/140mm/150mm/160mmWidth :40mm/50mmLength : All sizes available.

1UPRIGHT&BEAM

Aceally upright specificatin

Aceally Beam specificatin

Aceally Distributed Loading Table

Each beam supplied with steel safety lock , which guarantee the beams correctly positioned and help prevent the beam being accidentally dislodged during this work.

3-hooks End connector Teardrop connector

SAFETY PIN

2BEAM CONNECTOR&SAFETY PIN

90/100 Frame Bracing 120 Frame Bracing

Bracing Block HorizontalChannel bracing(HB)

DiagonalChannel bracing(DB)

3BRACING

Row Spacers are fitted between frames of double entry racks to increase front to Back rigidity and stability.Length: As requiredSize: 50*30*1.5mm , rectangle pipe with endplates

Double Sides

Single Side

4SPACER

The Base Plate must be fitted to every upright to:u Provide a smooth bearing surface for the uprightu Spread the load of the upright over a reasonable area of floor

There are four common Base Plates in use for different situations:

5BASE PLATE&SHIM

U type upright protector L type upright protector Frame protector

Any damage to racking will reduce its load carrying capacity. Aceally provides a range of rack protection Accessories, include upright protector and frame protector.

6UPRIGHT PROTECTOR&FRAME PRTECYOR

Supported at each end by the beams, Pallet support beams provide a secondarySupport member for pallet racking or shelving . The Pallet Support Bar is designedto have its top surface approximately flush with the beams.

7PALLET SUPPORT BAR

Aceally Projects