Pall Hc Series
Click here to load reader
-
Upload
kaoblekstena -
Category
Documents
-
view
212 -
download
0
Transcript of Pall Hc Series
Description
Flows to 200 gpm (755 L/min) Pressures to 250 psi (17 bar) Port sizes: 1-1/2" and 2"
Specifications
Maximum Allowable Working Pressure:
250 psi (17 bar)
Fatigue Pressure Rating:
Rated Fatigue pressure: 250 psi (17 bar) 107 cycles per NFPA T2.6.1 - 1974
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C) Fluorocarbon seals -20°F to 250°F (-29°C to 120°C) 140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 22.5 lbs. (10.2 kg) T length– 23.7 lbs. (10.8 kg) U length– 25.0 lbs. (11.3 kg) V length– 31.0 lbs. (14.1 kg)
Filter Element Collapse Pressure:
150 psid (10 bar)
Caution:
120 psi (8 bar) maximum for non-bypass valve options (prevents possible filter element collapse)
Dimensional Drawings
Contact Us: www.pall.com/contact
6400 Series Filter Assemblies
Page 1 / 6
Page 2 / 6
Performance
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G. Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Ordering Information
Figure 1. Housing Pressure Drop using fluid with 0.9 S.G. Housing Pressure drop is directly proportional to specific gravity.
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G. Bypass valve pressure drops are directly proportional to specific gravity.
6400 Series Element P factor(psid/gpm)
Length DP DN DS DT
8" 0.26 0.16 0.12 0.08
13" 0.17 0.09 0.07 0.06
16" 0.13 0.07 0.05 0.04
26" 0.10 0.05 0.04 0.03
Assembly P/N: H 6400
Table1 Table2 Table3 Table4 Table5 Table6 Table7Table8 Table9
Page 3 / 6
Note: Choose from the options in the following tables to compile the specific Product Number.
Element P/N: HC 6400F
Table4 Table5 Table1
TABLE 1: SEAL OPTIONS
Code Seals
H Nitrile
Z Fluorocarbon
TABLE 2: PORT STYLE OPTIONS
Code Port Style
A SAE J514 straight thread
B NPT
D Flange SAE J518c-Code 61
TABLE 3: INLET PORT SIZE OPTIONS
Code Size
20 1-1/4"
24 1-1/2"
TABLE 4: FILTER Element OPTIONS
Code ßx 200 ßx(c)=1000
DP 3 5
DN 6 7
DS 12 12
DT 25 22
TABLE 5: LENGTH OPTIONS*
Assembly Code Element Code**
S 8
T 13
U 16
V 26
* Use code in second column for element part no.
** Nominal length in inches.
TABLE 6: BYPASS VALVE OPTIONS
Code Description
A 25 psid
B 50 psid
W Non-bypass
Page 4 / 6
8 25 psid with ABFV*
9 50 psid with ABFV
V Non-bypass with ABFV
* ABFV- Anti-backflow valve.
TABLE 7: DIFFERENTIAL PRESSURE DEVICE OPTIONS
Code Description
PM Visual indicator with thermal lockout
DM Visual indicator with no thermal lockout
LL Electrical switch (SPDT) with 6" leads
TL Electrical switch with DIN connector
ML ‘TL’ type switch with matching wiring cap
SL Electrical switch with MS receptacle
BL Plug in place of indicator
PL Same as PM but with plastic body
DL Same as DM but with plastic body
Indicator and switch pressure settings. 16 psid with "A"and "8" bypass valve. 35 psid with "W," "V," "B," and "9" option.
TABLE 8: SECONDARY PORT OPTIONS
Code Port Option Port Size
S Port machined 1-1/4"
N Non-machined -
Port opposite main inlet in style consistent with main inlet port (see Table 2).
TABLE 9: AUXILIARY PORT OPTIONS
Code Port Option Port Size
R Right side* 1"
L Left side* 1"
B Both 1"
N Non-machined -
* Left or right side when facing inlet port. Port style consistent with main inlet
port (See Table 2), except that "A" style auxiliary port(s) is used with "D" style
main inlet port.
Page 5 / 6
Contact Information
Corporate Headquarters: Pall Corporation, 25 Harbor Park Drive, Port Washington, New York, USA 11050, Web: www.pall.com, Tel: 1-516-484-5400, Contact: www.pall.com/contact
© 2011, Pall Corporation, Pall, and other names are trademarks of Pall Corporation. ® indicates a registered trademark in the USA. Revision Date: 08/25/2010
http://pall.com/main/Industrial-Manufacturing/Product.page?id=18650 Thursday, January 12, 2012 9:44:24 AM
Page 6 / 6