PALFINGER Service Crane - Drive Products 4016 PALFINGER Service Crane One piece hexogonal boom...
-
Upload
trinhquynh -
Category
Documents
-
view
219 -
download
2
Transcript of PALFINGER Service Crane - Drive Products 4016 PALFINGER Service Crane One piece hexogonal boom...
The service crane solution
The PSC 3216 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 16ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
PSC 3216 PALFINGER Service Crane
One piece hexogonal boom sections with single weld seam
Winch integrated two block damage prevention system
Protective coverElectric (power pack) /Hydraulic (truck pump and PTO)
Stowing hook deisgned to keep load block from contacting the bottom of the boom
Boom tip hook (optional)
Electric or Hydraulicwinch
Electric / Hydraulic
Two internal powered extensions (optional)
Continuous rotation /410O Rotation
Combining North American manufacturing, service and support with European technology
PSC
321
610
.12
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.Meets: OSHA 1910,180 requirements, ANSI B30.5 Safety Standards
Hydraulic system
• 12 Volt DC Power Supply
• 12V Power Pack / PTO and Pump Chassis Mounted
• 2,800psi (193bar) System
• 2.2 GPM (8.8 Liter/min.) / 3.5 GPM (13.2 Liter/min.)
• Nonintegrated load-holding valves on all cylinders
• Electronic overload protection system
• Proportional Crane Valve (optional)
• Proportional Crane Valve (standard)
Rotation system
• Slewing torque 2,130 ft. lbs. (2.89 kNm)
• Continuous Rotation / 410° Rotation
Control system
• Wireless Remote control unit
• Integrated E-stop button
• Manual valve activation capability
Winch
• Cable speed 19.6 ft./min (6.0 m/min.) / 21.0 ft./min (6.4 m/min.)
• Max winch force single line 2,000 lbs. (907 kg)
• Max winch force double line 4,000 lbs. (1820 kg)
• 80ft. (24.4m) of 1/4” (6.4mm) Galvanized Aircraft Cable
• Planetary electric winch / Planetary hydraulic winch
• Two-Block Damage Prevention System
Chassis specifications
• Chassis style Conventional cab
• Recommended GVWR 10,500 lbs.
• Base Plate Dimension 15”X 15” (381mm x 381mm)
• Hole Pattern 12” X 12” (305mm x 305mm)
• 1’’-8 UNC Thread
E-coat
• Crane components receive a submerged electrocoat primer
and topcoat finish paint for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical
with the paint applied with a precise thickness over the entire
product so no paint is wasted.
Technical specifications
• Max lifting moment
• 12,500 ft. lbs. (1.7mt) @ 0°
• 14,560 ft. lbs. (2.0mt) @ 26°
• Power Extension to 11.4 ft. (3.47m) Manual Extension to 16’ (4.9m)
• Optional Internal Power Extension to 16’ (4.9m)
• Lifting height from base of crane 16’8” (5.1m)
• Crane weight base version 650lbs. (295kg) / 630 lbs. (285kg)
PSC 3216 Electric / Hydraulic Service Crane
PSC 4016 PALFINGER Service Crane
One piece hexogonal boom sections with single weld seam
Winch integrated two block damage prevention system
Protective coverElectric (power pack) /Hydraulic (truck pump and PTO)
Stowing hook deisgned to keep load block from contacting the bottom of the boom
Boom tip hook (optional)
Electric or Hydraulicwinch
Electric / Hydraulic
Two internal powered extensions (optional)
Continuous rotation /410O Rotation
The service crane solution
The PSC 4016 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 16ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
Combining North American manufacturing, service and support with European technology
PSC
401
610
.12
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.Meets: OSHA 1910,180 requirements, ANSI B30.5 Safety Standards
Hydraulic system
• 12 Volt DC Power Supply
• 12V Power Pack / PTO and Pump Chassis Mounted
• 2.800psi (193bar) System
• 2.2 GPM (8.8 Liter/min.) / 3.5 GPM (13.2 Liter/min.)
• Nonintegrated load-holding valves on all cylinders
• Electronic overload protection system
• Proportional Crane Valve (optional)
• Proportional Crane Valve (standard)
Rotation system
• Slewing torque 2,130 ft. lbs. (2.89 kNm)
• Continuous Rotation / 410° Rotation
Control system
• Wireless Remote control unit
• Integrated E-stop button
• Manual valve activation capability
Winch
• Cable speed 19.6 ft./min (6.0 m/min.) / 21.0 ft./min (6.4 m/min.)
• Max winch force single line 2,000 lbs. (907 kg)
• Max winch force double line 4,000 lbs. (1814 kg)
• 80ft. (24.4m) of 1/4” (6.4mm) Galvanized Aircraft Cable
• Planetary electric winch / Planetary hydraulic winch
• Two-Block Damage Prevention System
Chassis specifications
• Chassis style Conventional cab
• Recommended GVWR 10,500 lbs.
• Base Plate Dimension 15”X 15” (381mm x 381mm)
• Hole Pattern 12” X 12” (305mm x 305mm)
• 1’’-8 UNC Thread
E-coat
• Crane components receive a submerged electrocoat primer
and topcoat finish paint for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical
with the paint applied with a precise thickness over the entire
product so no paint is wasted.
Technical specifications
• Max lifting moment
• 18,500 ft. lbs. (2.5mt) @ 0°
• 23,235 ft. lbs. (3.2mt) @ 26°
• Power Extension to 11.4 ft. (3.47m) Manual Extension to 16’ (4.9m)
• Optional Internal Power Extension to 16’ (4.9m)
• Lifting height from base of crane 16’8” (5.1m)
• Crane weight base version 650lbs. (295kg) / 630 lbs. (285kg)
PSC 4016 Electric / Hydraulic Service Crane
PSC 4025 PALFINGER Service Crane
One piece hexogonal boom sections with single weld seam
Winch integrated two block damage prevention system
Protective coverElectric (power pack) /Hydraulic (truck pump and PTO)
Stowing hook deisgned to keep load block from contacting the bottom of the boom
Boom tip hook (optional)
Electric or Hydraulicwinch
Two internal powered extensions
Continuous rotation /410O Rotation
Electric / Hydraulic
The service crane solution
The PSC 4025 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 25ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
Combining North American manufacturing, service and support with European technology
PSC
402
510
.12
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.Meets: OSHA 1910,180 requirements, ANSI B30.5 Safety Standards
Hydraulic system
• 12 Volt DC Power Supply
• 12V Power Pack / PTO and Pump Chassis Mounted
• 2.800psi (193bar) System
• 2.2 GPM (8.8 Liter/min.) / 3.5 GPM (13.2 Liter/min.)
• Nonintegrated load-holding valves on all cylinders
• Electronic overload protection system
• Proportional Crane Valve (optional)
• Proportional Crane Valve (standard)
Rotation system
• Slewing torque 2,130 ft. lbs. (2.89 kNm)
• Continuous Rotation / 410° Rotation
Control system
• Wireless Remote control unit
• Integrated E-stop button
• Manual valve activation capability
Winch
• Cable speed 19.6 ft./min (6.0 m/min.) / 21.0 ft./min (6.4 m/min.)
• Max winch force single line 2,000 lbs. (907 kg)
• Max winch force double line 4,000 lbs. (1814 kg)
• 80ft. (24.4m) of 1/4” (6.4mm) Galvanized Aircraft Cable
• Planetary electric winch / Planetary hydraulic winch
• Two-Block Damage Prevention System
Chassis specifications
• Chassis style Conventional cab
• Recommended GVWR 10,500 lbs.
• Base Plate Dimension 15”X 15” (381mm x 381mm)
• Hole Pattern 12” X 12” (305mm x 305mm)
• 1’’-8 UNC Thread
E-coat
• Crane components receive a submerged electrocoat primer
and topcoat finish paint for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical
with the paint applied with a precise thickness over the entire
product so no paint is wasted.
Technical specifications
• Max lifting moment
• 18,500 ft. lbs. (2.5mt) @ 0°
• 23,235 ft. lbs. (3.2mt) @ 26°
• Lifting height from base of crane 25’6” (7.8m)
• Power Extension 25’ (7.6m)
• Crane weight base version 800lbs. (364kg) / 780 lbs. (355kg)
PSC 4025 Electric / Hydraulic Service Crane
PSC 4329PALFINGER Service Crane
The service crane solution
The PSC 4329 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 29ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
Combining North American manufacturing, service and support with European technology
PSC
432
910
.12
Hydraulic system• 3,045 psi system
• 30 gallon reservoir
• 8 GPM minimum crane requirement
• Power requirement of 24hp
• Powered by chassis integrated PTO and pump
• Integrated load-holding valves on all cylinders
• Integrated overload protection system
Rotation system• Slewing torque 4,920 ft. lbs
• Slewing speed 2 rpm
• Slewing angle 400o
Control system• Central control box
• Portable digital control unit
• Infinitely variable (proportional) function controls
• True multi-function (8) wireless remote control
• Integrated E-stop button
• Manual valve activation capability
Winch• Cable speed 60 ft/min
• Cable speed at 3rd wrap 51 ft/min
• Max winch capacity single line 4,000 lbs
• Max winch capacity double line 8,000 lbs
• Cable size 7/16 inch
• Rope length 120 ft
• Orbital hydraulic motor
• Planetery drive
• Integrated two-block damage prevention feature
Chassis specifications• Chassis style Conventional cab
• Front axle rating (FAWR) 7,000 lbs
• Rear axle rating (RAWR) 13,660 lbs
• CA 84“
• Minimum GVWR 19,500 lbs
E-coat• Crane components receive a submerged
electrocoat primer and topcoat finish paint
for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical with
the paint applied with a precise thickness over the entire product
so no paint is wasted.
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Technical specifications
Crane rating 43,000 ft.lbsMax. lifting moment 49,180 ft.lbsMax. lifting capacity (Double Line) 8,000 lbsMax. hydraulic outreach 29‘ 2“Lifting height from base of crane 28‘ 6“Slewing angle 4000
Slewing torque 4,920 ft.lbsMax. operating pressure 3,045 psiCrane weight 2,160 lbs
PSC 4329 Service crane
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.
PSC 5025 PALFINGER Service Crane
One piece hexogonal boom sections with single weld seam
Winch integrated two block damage prevention system
Protective coverElectric (power pack) /Hydraulic (truck pump and PTO)
Stowing hook deisgned to keep load block from contacting the bottom of the boom
Boom tip hook (optional)
Electric or Hydraulicwinch
Two internal powered extensions
Continuous rotation /410O Rotation
Electric / Hydraulic
The service crane solution
The PSC 5025 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 25ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
Combining North American manufacturing, service and support with European technology
PSC
502
510
.12
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.Meets: OSHA 1910,180 requirements, ANSI B30.5 Safety Standards
Hydraulic system
• 12 Volt DC Power Supply
• 12V Power Pack / PTO and Pump Chassis Mounted
• 2.800psi (193bar) System
• 2.2 GPM (8.8 Liter/min.) / 4.4 GPM (16.7 Liter/min.)
• Nonintegrated load-holding valves on all cylinders
• Electronic overload protection system
• Proportional Crane Valve (optional)
• Proportional Crane Valve (standard)
Rotation system
• Slewing torque 4,008 ft. lbs. (5.54 kNm)
• Continuous Rotation / 410° Rotation
Control system
• Wireless Remote control unit
• Integrated E-stop button
• Manual valve activation capability
Winch
• Cable speed 18.8 ft./min (5.7 m/min.) / 27.0 ft./min (8.2 m/min.)
• Max winch force single line 2,500 lbs. (1136 kg) / 3000 lbs. (1364 kg)
• Max winch force double line 5,000 lbs. (2273 kg) / 6000 lbs. (2727 kg)
• 90ft. (27.4m) of 5/16” (7.9mm) Galvanized Aircraft Cable
• 90ft. (27.4m) of 3/8” (9.5mm) Galvanized Aircraft Cable
• Planetary electric winch / Planetary hydraulic winch
• Two-Block Damage Prevention System
Chassis specifications
• Chassis style Conventional cab
• Recommended GVWR 14,500 lbs.
• Base Plate Dimension 16.75” X 16.75” (425mm x 425mm)
• Hole Pattern 14.75” X 14.75” (375mm x 375mm)
• 1’’-8 UNC Thread
E-coat
• Crane components receive a submerged electrocoat primer
and topcoat finish paint for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical
with the paint applied with a precise thickness over the entire
product so no paint is wasted.
Technical specifications
• Max lifting moment
• 30,500 ft. lbs. (4.2mt) @ 0°
• 34,580 ft. lbs. (4.8mt) @ 26°
• Lifting height from base of crane 25’6” (7.8m)
• Power Extension 25’ (7.6m)
• Crane weight base version 880lbs. (400kg) / 860 lbs. (391kg)
PSC 5025 Electric / Hydraulic Service Crane
PSC 6229Palfinger Service Crane
The service crane solution
The PSC 6229 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 29ft of
hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses
with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-
ponents guarantee years of worry free usage.
PSC
622
910
.12
Hydraulic system• 3,045 psi system
• 30 gallon reservoir
• 8 GPM minimum crane requirement
• Power requirement of 24hp
• Powered by chassis integrated PTO and pump
• Integrated load-holding valves on all cylinders
• Integrated overload protection system
Rotation system• Slewing torque 6,800 ft. lbs
• Slewing speed 2 rpm
• Slewing angle 400o
Control system• Central control box
• Portable digital control unit
• Infinitely variable (proportional) function controls
• True multi-function (8) wireless remote control
• Integrated E-stop button
• Manual valve activation capability
Winch• Cable speed 60 ft/min
• Cable speed at 3rd wrap 51 ft/min
• Max winch capacity single line 5,400 lbs
• Max winch capacity double line 10,800 lbs
• Cable size 7/16 inch
• Rope length 120 ft
• Orbital hydraulic motor
• Planetary drive
• Integrated two-block damage prevention feature
Chassis specifications• Chassis style Conventional cab
• Front axle rating (FAWR) 12,000 lbs
• Rear axle rating (RAWR) 21,000 lbs
• CA 84“ to 120“
• Minimum GVWR up to 33,000 lbs
E-coat• Crane components receive a submerged
electrocoat primer and topcoat finish paint
for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical with the
paint applied with a precise thickness over the entire product so no
paint is wasted.
Technical specifications
Crane rating 62,000 ft.lbsMax. lifting moment 68,900 ft.lbsMax. lifting capacity (Double Line) 10,800 lbsMax. hydraulic outreach 29‘ 2“Lifting height from base of crane 28‘ 8“Slewing angle 4000
Slewing torque 6,800 ft.lbsMax. operating pressure 3,045 psiCrane weight 2,490 lbs
PSC 6229 Service crane
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
Combining North American manufacturing, service and support with European technology
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.
PSC 7229Palfinger Service Crane
The service crane solution
The PSC 7229 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 29ft of
hydraulic reach with its self centering hexagonal booms. North American manufacturing and components including SAE hoses
using JIC fittings, standard wireless remote control in conjucntion with an industry leading 24-month warranty on all major
components guarantee years of worry free usage.
European technology with North American manufacturing, service and support
PSC
722
910
.12
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice. Note: (*) Estimated weight
Hydraulic system• 3,045 PSI System
• 30 Gallon Reservoir
• 8 GPM minimum crane requirement
• Power requirement of 24hp
• Powered by chassis integrated PTO and pump
• Integrated load-holding check valves on all cylinders
• Integrated overload protection system
Rotation system• Slewing torque 7,053 ft. lbs
• Slewing speed 2 RPM
• Slewing angle 400 degrees
Control system• Central control box
• Portable digital control unit
• Infinitely variable (proportional) function controls
• True multi-function (8) wireless remote control
• Integrated E-stop button
• Manual valve activation capability
Winch• Cable speed 60 ft/min
• Cable speed at 3rd rap 51 ft/min
• Max winch capacity single line 6,200 lbs
• Max winch capacity double line 12,500 lbs
• Cable size 1/2 inch
• Rope length 131.2 ft
• Orbital hydraulic motor
• Planetery drive
• Integrated anti-two blocking system
Chassis specifications• Chassis style Conventional cab
• Front axle rating (GAWR) 12,000 lbs
• Rear axle rating (GAWR) 21,000 lbs
• CA 84“ to 120“
• Minimum GVWR 33,000 lbs
E-coat• Crane components receive a submerged
electrocoat primer and topcoat finish paint
for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical with the
paint applied with a precise thickness over the entire product so no
paint is wasted.
Technical specifications
Crane rating 72,000 ft.lbsMax. lifting moment 79,959 ft.lbsMax. lifting capacity (Double Line) 12,500 lbsMax. hydraulic outreach 29‘-2“Lifting height from base of crane 28‘-6“Slewing angle 4000
Slewing torque 7,053 ft.lbsMax. operating pressure 3,045 psiCrane weight* 2,612 lbs
PSC 7229 Service crane
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com
PSC 8629Palfinger Service Crane
The service crane solution
The PSC 8629 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space
and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 29ft of
hydraulic reach with its self centering hexagonal booms. North American manufacturing and components including SAE hoses
using JIC fittings, standard wireless remote control in conjucntion with an industry leading 24-month warranty on all major
components guarantee years of worry free usage.
European technology with North American manufacturing, service and support
PSC
862
910
.12
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice. Note: (*) Estimated weight
Hydraulic system• 3,045 PSI System
• 30 Gallon Reservoir
• 8 GPM minimum crane requirement
• Power requirement of 24hp
• Powered by chassis integrated PTO and pump
• Integrated load-holding check valves on all cylinders
• Integrated overload protection system
Rotation system• Slewing torque 9,270 ft. lbs
• Slewing speed 2 RPM
• Slewing angle 400 degrees
Control system• Central control box
• Portable digital control unit
• Infinitely variable (proportional) function controls
• True multi-function (8) wireless remote control
• Integrated E-stop button
• Manual valve activation capability
Winch• Cable speed 60 ft/min
• Cable speed at 3rd rap 51 ft/min
• Max winch capacity single line 7,000 lbs
• Max winch capacity double line 14,000 lbs
• Cable size 1/2 inch
• Rope length 131.2 ft
• Orbital hydraulic motor
• Planetery drive
• Integrated anti-two blocking system
Chassis specifications• Chassis style Conventional cab
• Front axle rating (GAWR) 12,000 lbs
• Rear axle rating (GAWR) 21,000 lbs
• CA 120“
• Minimum GVWR 33,000 lbs
E-coat• Crane components receive a submerged
electrocoat primer and topcoat finish paint
for maximium durability and finish.
• E-coat is environment-friendly, recyclable, and economical with the
paint applied with a precise thickness over the entire product so no
paint is wasted.
Technical specifications
Crane rating 86,000 ft.lbs.Max. lifting moment 94,628 ft.lbsMax. lifting capacity (Double Line) 13,986 lbsMax. hydraulic outreach 29‘-2“Lifting height from base of crane 28‘-6“Slewing angle 4000
Slewing torque 9,270 ft.lbsMax. operating pressure 3,045 psiCrane weight* 2,714 lbs
PSC 8629 Service crane
Omaha Standard PALFINGER
3501 S. 11th St.
Council Bluffs, IA 51501
Phone: 1-712-328-7444
Toll-Free: 1-800-279-2201
Fax: 1-800-568-7444
www.palfinger.com