Pager-ST800 USERMANUAL POCSAG
-
Upload
skip-rogers -
Category
Documents
-
view
220 -
download
0
Transcript of Pager-ST800 USERMANUAL POCSAG
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
1/24
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
2/24
Congratulations on your purchase of our Pager. By
incorporating some of the most advanced electronic paging
technologies, the is reliable and easy to use. Best of all,
the is affordable and will keep you in touch with those
important to you.
Please carefully read this manual before using your Pager
in order to fully understand the pager's functions and capabilities.Once again, congratulations on your purchase.
ST800
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
3/24
>>>>>>>>>>>>>>>>>>>
FEATURES
BUTTONS
ICONS AND DESCRIPTIONS
TURNING THE PAGER ON
TURNING THE PAGER OFF
RECEIVING AND READING MESSAGES
READING LOCKED MESSAGES
DUPLICATE MESSAGES
CHANGING THE ALERT STATUS
MEMORY CAPACITY & LOW BATTERY INDICATOR
LOCKING MESSAGES
DELETING INDIVIDUAL MESSAGES
DELETING ALL MESSAGES
SETTING THE ALARM
SETTING THE DATE AND TIMEAUTOMATIC ON / OFF
LIGHT AND BATTERY INFORMATION
CANNED MESSAGES
REMINDER ALERT
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 1
2 2
CONTENTS
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
4/24
FEATURES*
4
Automatic On/Off
Back Lighting
Deletion of All or Individual Messages
In Range Indicator
Low Battery Indicator
Duplicate Message Indicator
Unread Message Indicator
Memory Full Indicator
Reminder Alert
16 Message Memory Capability 9 Locked Messages
8 Different Melodies
5 Different Beeps
Vibrator
Time Stamp
Time/Date
Alarm
*Specifications are subject to change without prior notice
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
5/24
FUNCTION BUTTONUse to Enter the Menu ModeUse to Turn the Pager On!!
LAMP BUTTON!Use to Exit the Menu Mode!Use to Turn Light On and OffREAD BUTTON
Use to Read MessagesUse to Select Settings and Features
!!
BUTTONS
5
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
6/24
ICONS AND DESCRIPTIONS
6
: Message Lock
: Duplicate Message
: Pager Off
: Change Battery
: Message Full
: Message Longer than 12Characters
: Reception Area
: Alert (Beep) On
: Alert (Melody) On
: Alert (Vibrator) On
: Alarm On
: Auto Pager Off
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
7/24
< Stand by Mode >
To Turn the Pager OnPress the Function Button (pg.5) for at least two (2)seconds or longer while the pager is in the OFF mode.The Time and Date should appear on the bottom of the
pager screen.
*After inserting a battery, the pager will briefly vibrate and beep to indicate that it has
entered the normal reception mode.
TURNING THE PAGER ON*
7
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
8/24
To Turn the Pager OffPress the Function Button (pg.5) for at least two (2) secondsto access the Function Menu. The pager will beep once and"Set Alert?" should appear on the screen. "Set Alert?"should appear on the screen.
Press the Function Button once more and "Power Off?"should appear on the screen. Press the Read Button (pg.5) toturn the pager OFF. " "should appear on the pager in theupper right hand corner of the screen.
TURNING THE PAGER OFF
8
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
9/24
RECEIVING AND READING MESSAGES
Reading Messages with 13 Characters or
MoreMessages with 13 or more characters will appear togetherwith a symbol on the upper right hand corner of thescreen. Press the Read Button to read the message in it'sentirety.
9
Receiving & Reading MessagesWhen you receive a message, the selected alert will soundoff. Select the Read Button (pg.5) to stop the alert and toread the message(s). The following information will
appear: Message Number, Time Stamp and the Message.The message order will be from newest to oldest.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
10/24
Reading Locked MessagesIn order to read a locked message (s), there must be no unreadmessages.
Press the Function Button (pg.5) to enter into the Locked
Message Read Mode. Press the Read Button to display andread all locked messages.
READING LOCKED MESSAGES
10
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
11/24
Duplicate MessagesThe duplicate message indicator will appear on the pagerscreen when the pager receives a message that isidenticalto a message already in the pager's memory.
11
DUPLICATE MESSAGES
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
12/24
To Change the Alert StatusPress the Function Button (pg.5) for at least two (2)seconds or longer to access the Function Menu. The
pager will beep once and "Set Alert?"will appear on thepager screen.
Press the Read Button to select the set alert mode. Toscroll through the alert options, press the Function Button.The alerts will appear in the following order: Vibrator, 5Beeps and 8 Melodies.
Press the Read Button to make a selection while thedesired alert is displayed on the pager screen.
CHANGING THE ALERT STATUS
12
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
13/24
MEMORY CAPACITY & LOW BATTERY INDICATOR
13
Memory CapacityThe has the capacity to hold sixteen (16) numeric messages.
Low Battery IndicatorWhen the battery capacity falls below the operational level, the low battery icon will
appear and the voltage alarm tone will be activated.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
14/24
LOCKING MESSAGES
14
To Lock a MessageSelect a message to be locked and then press the FunctionButton (pg.5). When "Lock?" appears on the pagerscreen, press the Read Button. This will lock the messageand the screen will display "Locked".
A maximum of nine (9) messages can be locked at onetime.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
15/24
DELETING INDIVIDUAL MESSAGES
To Delete an Individual MessageTo delete unlocked message, press the Function Button(pg.5) twice (2x) while the message is displayed. Whenthe "Delete?"message appears on the pager screen, pressthe Read Button to delete.
To delete a locked message, press the Function Buttonwhile the message is displayed. When the "Delete?"message appears on the pager screen, press the ReadButton to delete. "Deleted" will appear on the pagerscreen once the message has been deleted.
15
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
16/24
DELETING ALL MESSAGES
16
To Delete all MessagesTo delete all unlocked messages, press the FunctionButton for at least two (2) seconds to access the FunctionMenu. Forward to "Delete All?" by pressing the FunctionButton. Press the Read Button after "Delete All?" appears
on the screen. "General?" will appear, at which time youshould press the Read Button to display "Really?"Confirm the deletion by pressing the Read Button again.
To delete all locked messages, press the Function Buttonfor at least two (2) seconds to access the Function Menu.
Forward to "Delete All?" by pressing the Function Button.Press the Function Button while "Delete All?"is displayed.Press the Read Button to display "Really?" Confirm thedeletion by pressing the Read Button again.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
17/24
SETTING THE ALARM
To Set the AlarmPress the Function Button (pg.5) for at least two (2) seconds toaccess the Function Menu. Forward to "Set Alarm?" by
pressing the Function Button. Press the Read Button to selectthe Alarm Mode.
Press the Function Button to toggle between Alarm On and OFF.Press the Read Button while "Alarm On?" is displayed with thetime blinking.
Press the Function Button to change the hour. To move to the
next field, press the Read Button. Press the Function Button tochange the minutes.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
18/24
To Set the Date and TimePress the Function Button (pg.5) for at least two (2) seconds toaccess the Function Menu. Forward to "Set Date?"by pressingthe function Button. Press the Read Button to select the SetTime Mode.
Press the Function Button to change the month. To move to thenext field, press the Read Button. Follow the same procedure toset the Time.
SETTING THE DATE AND TIME
18
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
19/24
AUTOMATIC ON/OFF*
*Factory Default is 1:00 a.m.- 5:00 a.m.
19
To Enable Automatic OnTo enable the Automatic On, press the Function Button for at leasttwo (2) seconds to access the Function Menu. Forward to "AutoOn/Off?"by pressing on the Function Button. Press and releasethe Function Button until "Auto On?" appears then press the Read
Button. Press the Function Button to adjust the hour, using theRead Button to proceed through the fields. Repeat the previousstep to adjust the On and Off time setting. Press the Read Buttonto activate your selection.
To Disable Automatic OnFrom the "Auto On/Off?"screen, press and release the FunctionButton until "Auto Off?" appears. Press the Read Button toactivate your selection.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
20/24
LIGHT AND BATTERY INFORMATION
To Turn on the LightPress the lamp button to activate the light.
Battery InformationThe is designed to operate with a AAA size alkaline battery.Do Not UseCarbon Zing Batteries.
20
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
21/24
CANNED MESSAGES
Canned MessagesThe pager comes with seven (5) pre-programmed messages which are displayedon the pager when the corresponding code is entered.
To Send a Canned MessageDial the pager number on a telephone and wait for a beep sound. Enter the corresponding codefor the desired message.
21
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
22/24
REMINDER ALERT
22
Following is the list of preprogrammed canned message.
CODE
1
2
3
4
5
Displayed Message
Honey
Friend
Love you
Home
Office
When an unread message exists, the pager gives a periodic reminder alert (every 3 minutes)until all unread messages are read.
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
23/24
-
8/7/2019 Pager-ST800 USERMANUAL POCSAG
24/24