Page 1 of 24 ACOUSTIC GLASS SLIDER 80 SERIES€¦ · Striker 110mm Stile Lockwood Keylock 35735C...

CREATING SPACES WHERE PEOPLE THRIVE www.lotusdoors.com.au

ACOUSTIC GLASS SLIDER 80 SERIES of 24

Standard Offer:

* 10.38mm Lam Glass is NOT compliant in NZ for 3 modules over 2.6m high. 10mm Toughened glass only.Minimum module width of 700mm (for impact force resistance).Maximum 3 modules to a panel.

All of Lotus' Standard offer meets DDA opening force requirements.

Dual & Triple Sliders: Dual Sliders Triple Sliders

Maximum Width 5.4m 6.2m Note DDA opening force is only required for first leaf of dual or triple slider.

Standard Offer:

* 10.38mm Lam Glass is NOT compliant in NZ for 3 modules over 2.6m high. 10mm Toughened glass only.Minimum module width of 700mm (for impact force resistance).Maximum 3 modules to a panel.

All of Lotus' Standard offer meets DDA opening force requirements.

Dual & Triple Sliders: Dual Sliders Triple Sliders

Maximum Width 5.4m 6.2m Note DDA opening force is only required for first leaf of dual or triple slider.

ACOUSTIC GLASS SLIDER 80 SERIES



Track

Glide Trolley c/w Throat Bearings Face Fixed

For Fixing See TSD-GSL-080-0013

Cover�

Acoustic Track\

Clip in Cover

�

� 34mm

L

Glazing Gaskets

SCALE: NTS

UNLESS NOTED OTHERWISE THIRD ANGLE PROJECTION

PRODUCT: TITLE:

Acoustic Top Seals

'-.... Twin Finger �Acoustic Seal

80mm Top Rail �•---- c/w Rail Covers

© COPYRIGHT LOTUS FOLDING WALLS & DOORS PTY LTD. REPRODUCTION PROHIBITED WITHOUT PERMISSION. CHANGES TO THE DESIGN AND OR DETAILS OF THIS DRAWING

MUST NOT BE MADE WITHOUT PERMISSION OF THE R&D DEPARTMENT MANAGER. DO NOT SCALE FROM THIS

DRAWING. CHECK ALL DIMENSIONS WITH THE LOTUS REPRESENTATIVE.

WWW.LOTUSDOORS.COM.AU ABN 61 007 087 523

DRAWING NUMBER:

10mm or 12mm Glass

80 SERIES GLASS SLIDERS

FACE MOUNTED ACOUSTIC TRACK AND TOP RAIL TSD-GSL-080-0003



Acoustic Glide Trolley c/w Throat Track

Cover Cavity Track

\•-------------...... -----

34mm

L

Acoustic__/ Sweep Seal Depending on Rw

Glazing Gaskets

SCALE: NTS


PRODUCT: TITLE:

Acoustic ---------Top Seals

Top Rail c/w Rail Covers

10mm or 1-------+--12mm Glass





DRAWING NUMBER: 80 SERIES GLASS SLIDERS

CAVITY SLIDER TRACK AND TOP RAIL TSD-GSL-080-0004



SCALE: NTS

Acoustic Sweep Seals

Floor Guide

<J

<J

<J


PRODUCT: TITLE:

-----------1 Om m or 12mm Glass

I I

<J I I I. I

I . I -�I I

<J <J

<J <J <J





DRAWING NUMBER:

Glazing Gaskets

Bottom Rail c/w Covers

40mm

FFL

<J

80 SERIES GLASS SLIDERS

TYPE 1 SEAL DETAIL AND BOTTOM RAIL TSD-GSL-080-0005



Acoustic Retractable Seals

SCALE: NTS

□


PRODUCT: TITLE:

10mm or 12mm Glass

Glazing Gaskets


FFL 10mm

Floor Guide





DRAWING NUMBER: 80 SERIES GLASS SLIDERS

TYPE 2 SEAL DETAIL AND BOTTOM RAIL TSD-GSL-080-0006



SCALE: NTS

UNLESS NOTED OTHERWISE

PRODUCT: 80 SERIES GLASS SLIDERS

10mm

10mm or 12mm Glass

Glazing Gaskets


Acoustic Retractable Seals

FFL Floor Guide

--------135 mm Cavity--------

THIRD ANGLE PROJECTION

TITLE:





DRAWING NUMBER: TYPE 4 SEAL DETAIL AND BOTTOM RAIL FOR CAVITY SLIDER ONLY TSD-GSL-080-0007



80mm

Vertical Mounted Acoustic Wall Seal Carrier c/w clip in

Acoustic Vertical Seal

� <J

L\

<J

10mmor-� 12mm Glass Glazing

Gaskets � 80mm Stile

SCALE: NTS




TITLE:





DRAWING NUMBER:WALL MOUNTED VERTICAL SEAL DETAIL

TSD-GSL-080-0008

L\ <J

67.5mm



--- 60mm±5mm ---i

Twin Finger Acoustic Seal

IMPORTANT

HANDLE AND LOCK CANNOT BE FITTED AT SAME HEIGHT 25mm

100mm

1 Om m -- Acoustic Balloon Seal Lockwood Keylock

3541SC Lock SP3540-LSSC Receiver

80mm \ Stile j

80mm

Lockwood Receiver Lotus Striker--___, 20mm 10mm or

12mm Glass

SCALE: NTS



Acoustic Jamb c/w Clip ins -� 33mm � Optional Handles


Handles if fitted to 80mm Stile are not DOA compliant - either fit to glass or use 110mm Stile





TITLE: DRAWING NUMBER: ACOUSTIC JAMB WITH 80mm STILE AND 30mm BACKSET MORTICE LOCK TSD-GSL-080-0010



IMPORTANT

HANDLE AND LOCK CANNOT BE FITTED AT SAME HEIGHT

--- 60mm±5mm ---

100mm

SCALE: NTS



25mm 10mm-- Twin Finger Acoustic Seal

Lotus Striker

110mm Stile

Lockwood Keylock 35735C Parrot Beak Mortice Lock

Acoustic Jamb c/w Clip ins-__, ------ 75mm -----

Minimum of 60mm required for DDA






TITLE: DRAWING NUMBER: ACOUSTIC JAMB WITH 110mm STILE AND 60mm BACKSET MORTICE LOCK TSD-GSL-080-0011

D-Handle

I

35mm to 45mm

42mm required for DDA



IMPORTANT

HANDLE AND LOCK CANNOT BE FITTED AT SAME HEIGHT

Active Panel

I

Lock Hardware Twin Finger Acoustic Seal

Acoustic Balloon Seal

Handle can be fitted to Glass

Optional Handle Hardware

Passive Panel

I

1---------125mm---+------i

1-------------165mm-------------1

SCALE: NTS



1------------------225mm-------------------1


TITLE: Bl-PARTING STILE





DRAWING NUMBER:

TSD-GSL-080-0012



SCALE: NTS




TITLE:

Fixing to Steel

180 PFC - 1 off PFC 180x75 M8x50 Bolts at 250mm centres. Minimum embedment of 6mm Limit is 205kg/sqmetre

Fixing to Timber

F17 KDHW - 2 off 290x45

<I .d

Type 17 No 14 gauge Tek screws at 250mm centres. Minimum embedment of 60mm Limit is 95kg/sqmetre

MGP10 - 2 off 290x45 Type 17 No 14 guage Tek screws at 250mm centres. Minimum embedment of 60mm Limit is 70kg/sqmetre

F5 Pine - 2 off 290x45 Type 17 No14 guage Tek screws at 250mm

4 centres Minimum embedment of 60mm Limit is 52kg/sqmetre





DRAWING NUMBER: FACE FIXED ACOUSTIC TRACK FIXING

TSD-GSL-080-0013



Outser Face of Wall

Active Slider .<I Bl-PARTING STILE

Notes:

Fit Handles to glassj

Cavity Wall Vertical Balloon Se Available as Option

Bl-PART I NG STll:-1=--------r----��

Q)

Cl) Q) > Cl) Cl)

. <I

LI .. ,1

�--�

1 )Cannot be fitted on the outer face of the wall. 2)Centreline of track to face of wall is 67.5mm.3)Clearance from face of slider to wall is 27.5mm4 )Use Acoustic Slider track with 72x26 track pelmet.S)Passive slider has internal footbolt in bi-parting stile.6)Can only use Type 1 seals for this configuration. Face Fixed

SCALE: NTS




TITLE:

Acoustic Track





DRAWING NUMBER: Bl-PARTING JUNCTION (90 DEGREE

TSD-GSL-080-0014 FACE FIXED



!I

<1 . .

ffi

Active SI ider

Cavity Wall Vertical Balloon Seal Available as Option

Passive SI ider

110 X 26 PELMET-------

Bl-PARTING STILE MACHINED -------r•

Notes: Face Fixed Acoustic Track

1 )Centreline of track to face of wall is 67.5mm. 2)Clearance from face of slider to wall is 27 .5mm.3)Use acoustic slider track with 72x26 track pelmet.4 )Passive slider has internal footbolt in bi-parting stile.5)Can use Type 1 & Type 2 seals for this configuration.6)Machine both sides of bi-parting stile to clear front pelmet andtrack seal.7)Use acoustic slider track with 11 0x26 slider track pelmet.

SCALE: NTS


PRODUCT: TITLE:





DRAWING NUMBER: 80 SERIES GLASS Bl - PARTING (FACE FIXED)

TSD-GSL0-080-0016 SLIDERS

Page 1 of 24 ACOUSTIC GLASS SLIDER 80 SERIES€¦ · Striker 110mm Stile Lockwood Keylock 35735C...

Documents

Transcript of Page 1 of 24 ACOUSTIC GLASS SLIDER 80 SERIES€¦ · Striker 110mm Stile Lockwood Keylock 35735C...