Controller Specifications Teaching Pendant Specifications ...
PACKIGN SPECIFICATIONS
Transcript of PACKIGN SPECIFICATIONS
Technical Data Sheet
Rigid mono PVC film laminated with PE film and then coated with PVdC. This highly crystalline
coating provides a significantly higher barrier against water vapour and PE layer gives necessary
flexibility to structure that helps in smooth cavity formation during thermoforming.
PROPERTIES
Construction 250µ PVC/25µ PE/40 g/m2 PVdC 10mil PVC/1mil PE/40 g/m
2 PVdC
Color Clear Clear
Density of PVC 1.35 g/cm3 1.35 g/cm
3
PVdC GSM Tolerance ± 7.5% ± 7.5%
Total Thickness 299µ 0.0117’’
Thickness Tolerance ± 7% ± 7%
Total GSM 400.5 ± 7% 400.5 ± 7%
Yield 2.49m2/kg (± 7%) 1751 in
2/lb (± 7%)
Dimensional Stability -8% max.(10min @ 140oC) -8% max. (10min @ 284
oF)
+3% max. +3% max.
Thermoforming range 100 o
C – 160 oC 212
oF – 320
oF
Tensile Strength min. 500kg/cm2 min. 7110 psi
Elongation min. 30% min. 30%
Vicat Softening Point 74 o
C – 76 oC 165.2
oF – 168.8
oF
Of base PVC
MVTR (38oC, 90% RH) 0.65 g/m
2/day 0.042 g/100 in
2/day
OTR (23oC, 50% RH) 0.55 cc/m
2/day 0.035 cc/100 in
2/day
Toxicity Non-toxic Non-toxic
FPTL 250 025 040 C1 TRIPAC 40
Regulatory Complies with the requirements of the European
Pharmacopeia and with the Commission Regulation (EU)
No. 10/2011.
Complies with the relevant US Code of Federal Regulations
CFR 21 and with the US Pharmacopeia where applicable.
Complies with the Directive 94/62/EC and with US CONEG
Regulations.
Formulation registered with US FDA, DMF 15884 Type III.
Production and quality controls according to cGMP.
Issued on: September 01, 2010.
Revision 02: Oct 2011.