Packet tracer
-
Upload
imdad-manik -
Category
Technology
-
view
1.080 -
download
9
description
Transcript of Packet tracer
CISCO PACKET TRACERCISCO PACKET TRACER
Software Engr. Imdad Manik
CISCO PACKET TARCER:-CISCO PACKET TARCER:-
Cisco Packet Tracer is a powerful network simulation program that allows students to experiment with network behavior
INTERFACE OF PACKET INTERFACE OF PACKET TRACER:-TRACER:-
FIRST NETWORK:-FIRST NETWORK:-Take one router, one switch, and
two PCs and connect both PCs with the switch by using copper straight-through wire.
Then router connect with switch.
FIRST NETWORK:-
Assigning IP:-Assigning IP:-
If you want to computers communicate network in the network they must have same IP address.
The IP ranges or class is:10.0.01 To 10.255.255.254
172.16.0.1 To 172.31.255.254
192.168.0.1 To 192.168.255.254
Assign IP address To PCs in first network
CLICK ON PC AND GO TO DESKTOP.
Again click on IP configuration.Again click on IP configuration.
Insert IP address and subnet Insert IP address and subnet gateway automatically generategateway automatically generate
IP address of second PC.IP address of second PC.
Insert IP address on routerInsert IP address on router
THIS IS A FIRST COMPLETE THIS IS A FIRST COMPLETE NETWORK:NETWORK:
Same as pervious :This two networks are same as pervious which I have discussed.
SECOND NETWORKSECOND NETWORK
THIRD NETWORK:THIRD NETWORK:
Connect routers by using Connect routers by using fiber.fiber.
If you want to routers If you want to routers communicate in the communicate in the network they must be network they must be assign IP addressassign IP address
Assigning Ips in Assigning Ips in routersrouters
Click on router and insert IPClick on router and insert IP
After insert IP in router you add After insert IP in router you add network Ips in RIP routing.network Ips in RIP routing.
same like other router will same like other router will be connects and Assign be connects and Assign the IPs for each network the IPs for each network and list down into RIP.and list down into RIP.
THIS IS A MY COMPLETE NETWORK THIS IS A MY COMPLETE NETWORK
If I send packet from one network to If I send packet from one network to third network then I checked through third network then I checked through
command.command.
sender
receiver
Check the Ping of 3rd Network
Now we can send packets Now we can send packets through that scenario which I through that scenario which I have discussedhave discussed
THANK YOU
ImdadullahMalik Shamraiz