PA SSIVE RFID SOLUTIONS FOR HEALTHCARE · PDF fileIn a smart RFID hospital, patient location...
Transcript of PA SSIVE RFID SOLUTIONS FOR HEALTHCARE · PDF fileIn a smart RFID hospital, patient location...
• Passive RFID is the most efficienttechnology for deployinginnovative process-centricsolutions in hospitals
• Passive RFID allows for scalabletargeted deployments; as
additional critical needs andresources are identifieddeployment can be added
• The flexible form factors of PassiveRFID readers and tags allow formore diverse applications of thetechnology
• Passive RFID has a lower totalcost of ownership than alternativetechnologies
• Rapid improvements in passiveRFID technology increases thepotential for new and innovativeapplications
PASSIVE RFID SOLUTIONS FOR HEALTHCARE: IMPROVE HOSPITAL PROCESSES WITH SMART ROOMS AND SYSTEMS
IMPROVE PATIENT CARE AND REDUCE COSTS
Over the last decade, RFID has become an integral part of the healthcare system
and patient experience. The development of passive RFID platforms is driven by the
potential to measure, report and monetize a growing number of transactions in
hospitals and clinics.
For hospitals, this means less focus on the enabling technology and more on the
improved processes and workflows. The result is less time and fewer resources to
prove the technology, and more time spent to drive outcomes, including improved
patient safety and satisfaction, compliance requirements, cost savings, and error
proofing.
Passive UHF RFID offers considerable utility for hospital applications. Its
unmatched combination of low cost and ease of deployment makes passive RFID
readers and tags a cost effective way for hospitals to integrate RFID into a single
or limited number of critical areas and then expand deployments when desired.
STARTING SMART
Hospital processes are complex; they are tied to the schedules of highly trained
doctors and nurses, millions of dollars of medical equipment, and vast facilities.
Therefore, it can be challenging to introduce change. Changing a procedure,
eliminating a step, or introducing a new technology can have implications
throughout several hospital departments and cost centers. To be successful,
start smart.
RFID is an effective way to identify and track patients and medical accessories,
improving both workflow and patient safety. A typical RFID patient badge or
accessory tag can be detected at the range of 5-10 meters. Unlike WiFi
technology, RFID detection requires no external sources of power besides the
signal from the reader itself, and it uses the reader’s own reflected RF signal to
communicate.
The unique advantage of RFID over other technologies is that it is a forced and
automated verification. If a patient wears an RFID badge, the patient is
automatically subjected to verification at various locations where JADAK RFID
readers are installed, without any further action required from the patient or
medical personnel.
SMART RFID SOLUTIONS FROM XECAN - Powered by JADAK RFID In a smart RFID hospital, patient location and wait times are automatically recorded when the patient enters a
specified area. Tracking of patients throughout designated areas is ensured with proper placement of the JADAK RFID
readers. This location and identification information can be visualized by means of RFID-enabled whiteboards. These
web-based tracking whiteboards can be accessed by staff from both desktop or hand-held computers. With these
solutions in place, the hospital can operate more efficiently, wait times can be significantly reduced, and patient
satisfaction can be greatly improved.
Smart RFID Reception
The smart RFID solution automates the greeting and queuing of patients, resulting in an efficient, cost effective, and personalized manner. This also allows patients to be immediately seated after arrival.
Smart RFID Radiation Treatment Rooms
Patients retain their RFID badges during the entire radiation treatment period and return their RFID badge at the conclusion of the session. The returned badges can then be reused for future patients.
Smart RFID Patient Tracking Whiteboards
With this solution, traditional dry erase “whiteboards” with handwritten entries are replaced by automated RFID-enabled electronic whiteboards. Patient location is automatically displayed and updated in real-time on these monitors. This results in reduced wait-time and a better patient experience.
“Patient safety is our top priority. By eliminating all manual intervention to automatically open the treatment chart for the patient who enters the procedure room, we can be certain that we have the ‘right patient, right
site’ with every single treatment session. A fully integrated RFID-EMR solution represents a substantive improvement in patient safety. Our testing to date has shown the system to be highly robust.”
Per Halvorsen, Director of Medical Physics, Alliance Oncology LLC.
XECAN RFID solutions are currently in use in the USA, Europe and Asia. User reviews, along with a complete description of its system, can be found on Xecan’s website: www.xecan.com.