ULTRA – PRECISION WELDING MINIATURE COMPONENTS

The Micro-Tig/Micro-Plasma designed and manufactured by Weldlogic offers distinct advantages in welding small delicate components consistently.

This dual process system provides precision welding con-trol in either the TIG or Plasma processes providing users expanded versatility within a single power source.

System Components and Features• Each system includes the welding power supply, integral water cooling system, flow meters, liquid cooled plasma torch and ground cable.• Front panel programming of Current, Pulsing, Weld Timer and Gas Functions • Direct interface to external control systems and foot pedal connection.

Micro-Plasma Advantages• Welding Amperages as low as 0.1 amp to 100 amps capacity• Consistent arc starting and stable arc column @ 0.1 ampere• High Speed Short Duration Welds• Minimal heat affected zone and low part distortion• Minimal high frequency arc start prevents interference with peripheral equipment• Joins thin materials; .003” (0.08mm) thick sheets

Medical Applications• Angiographic and Catheter Guide Wires • Pacemaker Batteries and Enclosures • X-Ray Tubes • Orthoscopic • Cutting Tools • Prosthetic Components • Laproscopic Assemblies

Aerospace Applications• Microwave & Laser Devices • Sensors • Specialty Cabling • Hermetic Sealing

Industrial Applications• Precision Instruments • Pressure & Load Sensors • Hermetically Sealed Canisters & Enclosures• Batteries • Metal Seals • Fine Wires • Hydraulic & Pneumatic Fittings • Wire Mesh • Bellows• Thin Sheet & Tubing • High Vacuum Assemblies • Tool & Die Molds

PA-10/100-STDDual Range / Dual Process Welding System

MICRO-TIG / MICRO-PLASMA

Headquarters: Weldlogic, Inc. • 2651 Lavery Court • Newbury Park, CA 91320 • Tel: 805-498-4004 • Fax: 805-498-1761European Office: Weldlogic Europe • Blackstone Road, Huntingdon, Cambridgeshire, PE29 6EF, UK • Tel. 01480 437478 • Fax. 01480 437479

WELDLOGIC, INC. www.weldlogic.com

Headquarters: Weldlogic, Inc. • 2651 Lavery Court • Newbury Park, CA 91320 • Tel: 805-498-4004 • Fax: 805-498-1761European Office: Weldlogic Europe • Blackstone Road, Huntingdon, Cambridgeshire, PE29 6EF, UK • Tel. 01480 437478 • Fax. 01480 437479

WELDLOGIC, INC. www.weldlogic.com

PA-10/100-STDDual Range / Dual Process Welding System MICRO-TIG / MICRO-PLASMA

SPECIFICATIONS

Micro-Tig Micro-Plasma• Main Arc Current: 0.1 to 100 A, 60% 0.1 to 100 A, 60%

• Power Input: 110 V / 230 50/60hz 110 V / 230 50/60hz

• Arc Voltage: 10 V - 25 V (Nominal) 10 V - 25 V (Nominal)

• Open Circuit Voltage: 110 V 110 V

• Pilot Arc Voltage: N.A. 7 V to 20 V

• Pilot Arc Current: N.A. 1.0 A to 6.0 A

• Pulse Rate: 0.1 - 100 P.P.S. 0.1 - 100 P.P.S.

• Upslope / Downslope 0.1 - 10 Seconds 0.1 - 10 Seconds

• Weld Time 0.1 - 99.9 Seconds 0.1 - 99.9 Seconds

• Dimensions 16” W x 14” H x 24” D 16” W x 24” H x 24” D

• Weight (dry) 105 lbs 145 lbs

(47 kg) (65 kg)