Hi-tech Pipes | Tubes | MS pipes | Manufacturer | Exporter ...
P109en Pipes and Tubes for Nuclear Application€¦ · Pipes & Tubes 2-6-1 Marunouchi,...
Transcript of P109en Pipes and Tubes for Nuclear Application€¦ · Pipes & Tubes 2-6-1 Marunouchi,...
www.nipponsteel.com Pipes& Tubes
2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 JapanTel: +81-3-6867-4111
Pipes and Tubes for Nuclear ApplicationP109en_01_201904p
© 2019 NIPPON STEEL CORPORATION
Pipes and Tubesfor NuclearApplication
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by NIPPON STEEL CORPORATION with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the NIPPON STEEL CORPORATION office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of NIPPON STEEL CORPORATION, affiliated companies, or third parties granting rights to NIPPON STEEL CORPORATION or affiliated companies. Other product or service names shown may be trademarks or registeredtrademarks of their respective owners.
www.nipponsteel.com Pipes& Tubes
2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 JapanTel: +81-3-6867-4111
Pipes and Tubes for Nuclear Application P109en_01_201904f
© 2019 NIPPON STEEL CORPORATION
Pipes and Tubesfor NuclearApplication
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by NIPPON STEEL CORPORATION with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the NIPPON STEEL CORPORATION office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of NIPPON STEEL CORPORATION, affiliated companies, or third parties granting rights to NIPPON STEEL CORPORATION or affiliated companies. Other product or service names shown may be trademarks or registered trademarks of their respective owners.
Material Series for Nuclear ApplicationNIPPON STEEL has developed "Fit for Purpose" materials for Nuclear applications with its sophisticated technologies.
Typical Application of NIPPON STEEL’s Pipes and Tubes
Material GradeStainless steels and Ni base alloys (see table below) in addition to carbon and low alloy steels can be manufactured.
Properties of NIPPON STEEL's Pipes and TubesBasic Function Certificate
Category ASME EN JISTP304TP304LTP316TP316LTP317NTP321
TPXM-19TP439
—Type410N06600N06690N08800
SA-213SA-312SA-376
SA-312SA-268
—SA-479
SB-163SB-167
G3459G3463
—
G3463
G4903G4904
1.43011.43061.44011.44041.44061.4541
——————
1.4558
X5CrNi18-10X2CrNi19-11
X5CrNiMo17-12-2X2CrNiMo17-13-2
X2CrNiMoN17-12-2X6CrNiTi18-10
——————
X10NiCrAlTi32-20
SUS304TP, SUS304TBSUS304LTP, SUS304LTBSUS316TP, SUS316TBSUS316LTP, SUS316LTBSUS317NTP, SUS317NTBSUS321TP, SUS321TB
—SUSXM8
SUS410TiTBSUS410TB
NCF600TP, NCF600TBNCF690TP, NCF690TBNCF800TP, NCF800TB
Austeniticstainless steel
Ferriticstainless steel
Ni base alloy
Dimensional rangeFrom 6 to 952.5 mm (0.24 to 37.5 inches) in outside diameter.
High corrosion resistanceHigh corrosion resistance achieved by optimizing the chemical composition and manufacturing processes. Nuclear grade 304 and 316 with high IGSCC※ resistance. (※IGSCC: intergranular stress corrosion cracking)
ISO 9001: International Organization for Standardization
ASME Sec.Ⅲ : American Society of Mechanical Engineers
HAF604 : Code on Supervision of Civil Nuclear Safety Equipment
Optional FunctionExtra low cobalt (Co≦0.02%)
Stainless steels with extra low Co are available for dose reduction.
High cleanlinessSulfur (S), phosphorus (P) and/or impurities can be minimized with sophisticated melting and re�ning processes.
Pre-filming Tight and uniform protective �lm prevents metal release such as Cr or Ni to coolant. The technology was applied to TP304 feed water heater tubes and contributed the does reduction in the actual nuclear power plant. (ABWR, Higashidori Unit 1 in Japan)
Good weldabilityFerrite content in the steel can be controlled for better weldability upon customer's request for further reliability of nuclear power plant.
ISOE※ technical award for Pre-filming technology
(※Information System on Occupational Exposure)
NIPPON STEEL can supply various kinds of products with sophisticated manufacturing equipments.
CRDM Drive Rod Tube (Type410/ SUS410TB)
CRDM Nozzle Tube(N06690/ NCF690TP)
ReactorSteam
Generator
Primary Cooling Water Pipe (TP316/ SUS316TP)
Feed Water Heater Tube(TP304/ SUS304TB)
Secondary Cooling Water Pipe (TP316/ SUS316TP)
Moisture Separator Heater Tube(TP439/ SUSXM8)
Main Steam Pipe(Carbon Steel or Alloy Steel)
Steam Generator Tube(N06690/ NCF690TP)
Manufacturing Equipments ProductsProcess Equipments
Steel making
Casting
Forging BloomingHot working
Cold working
Heat treatment
Bending
Pipe �nishing
Examination
PRHR (Alloy690)
Hollow piston tube(XM-19)
Low �n tube(410Ti, TP439)
CRDM nozzle tube(Alloy690)
Stick elbow(316L)
U-bent tube(304, 316, Alloy690)
Blast furnaceElectric arc furnaceAOD (Argon Oxygen Decarburization) equipmentVOD (Vacuum Oxygen Decarburization) equipmentVIM (Vacuum Induction Melting) furnaceVAR (Vacuum Arc Remelting) furnaceESR (Electro Slag Remelting) equipmentIngot castingContinuous casting machineSuper forging pressBlooming millToe-angle piercing type tube making millExtrusion tube millHollow forging pipe millHydraulic cold drawing benchOil hydraulic drawing benchChain type cold drawing benchHigh pressure drawing benchCold pilger millLow fin machineContinuous type furnaceBatch type furnaceBarrel type furnaceBright furnaceVacuum annealing furnaceDie benderDieless benderOD and ID grinding machineBoring and trepanning machineLathes for OD machineShot blast equipmentSand blast equipmentUltrasonic testingEddy current testingFluorescent penetrant testingHydraulic testing
NIPPON STEEL CORPORATION