A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24004NF

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5 GHZ, 4

DBI, NF CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A OUTLINE DRAWING INITIAL

2/8/14

VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 4 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(256.35)

(

19.05)

(

20.96)

5/8-24 UNEF-2A

NF CONNECTOR

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24004NM

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5 GHZ, 4

DBI, NM CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A OUTLINE DRAWING INITIAL

2/8/14

VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 4 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

(249.68)

(

20.96)

(

19.05)

PRODUCT LABEL

ANTENNA

NM CONNECTOR

A A

B B

1

1

2

2

3

3

4

4

X.X in `.1 in, X.XX in `.01 in, X.XXX in `.005 inANGULAR` 1~, FRACTIONAL ` 1/64

JMPUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES

CHECKED

MATERIAL:

1/6/2015DATE

SEE COMPONENTPRINTS

SEECOMPONENT

PRINTS

SUPPLIER PRINT ACCEPTANCE: [ ] Accept drawing/specification: No changes needed: [ ] This part is RoHS compliant [ ] This part is REACH compliant [ ] Accept drawing/specification. Notes/Mark-ups added [ ] Cannot accept drawing/spec. Notes/Mark-ups added Supplier Projected Outgoing Quality: SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5 GHZ, 6DBI, NF CONN

PCTEL PROPRIETARY DATA

THIRD ANGLE PROJECTION

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED REPRESENTATIVE OF PCTEL, INC.

DATEDRAWN

FINISH:

FOR TOLERANCES NOT SPECIFIED USE:

SIZE

1:1

DESCRIPTION

DRAWING NO.

SHEET

ODD_BOA24006NFSCALE

B 1 OF 1

PCTEL, INC.471 BRIGHTON DRIVEBLOOMINGDALE, IL 60108PH. 630-372-6800FAX. 630-372-8077

REVISION HISTORYREV DESCRIPTION DATE APPROVED

1 CREATE ODD 06JAN15 JMP

N-FEMALE CONNECTOR

5/8-24 2A THREAD

(.530)

ACROSSFLATS

(.95)

(1.50)

(15.01)

(n.825)

(.636)

RADOME

(.75)

1

1

2

2

3

3

4

4

A A

B B

C C

D D

SEE COMPONENT

PRINTS

MATERIAL:

APPROVED

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24006NM

PCTEL, INC.

BROADBAND TECHNOLOGY GROUP

ANTENNA PRODUCTS

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

C

SCALE SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

NA

2011-12-16

SIZE

JMP

DATE

DATE

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5

GHZ, 6 DBI, NM CONNSEE COMPONENT

PRINTSTHE INFORMATION CONTAINED IN THIS

DOCUMENT IS OF A PROPRIETARY NATURE

AND MAY NOT BE USED OR REPRODUCED

WITHOUT THE EXPRESSED WRITTEN PERMISSION

OF PCTEL INC., BLOOMINGDALE, IL 60108

PROPRIETARY DATA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

FOR TOLERANCES NOT SPECIFIED USE:

X.X in .1 in, X.XX in .01 in, X.XXX in .005 in

ANGULAR 1, FRACTIONAL 1/64

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A ODD DRAWING

29 JULY

15

VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 6 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

(.825)

(.520)

.350

1.300

(14.810)

(.750)

.636(Ø )

RADOME DIAMETER

(.250)

CAP

FIBERGLASS RADOME

NM CONNECTOR

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24008DT7NF

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DT7,2.4-2.5 GHZ, 8 DBI, NF

CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 8 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(644.29)

(

19.94)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24008DT7NM

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DT7,2.4-2.5 GHZ, 8 DBI, NM

CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 8 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(636.16)

(

20.96)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24008DT12NF

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DT12,2.4-2.5 GHZ, 8 DBI, NF

CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 8 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(644.29)

(

19.94)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24008DT12NM

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DT12,2.4-2.5 GHZ, 8 DBI, NM

CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 8 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(636.16)

(

20.96)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

X.X in `.1 in, X.XX in `.01 in, X.XXX in `.005 inANGULAR` 1~, FRACTIONAL ` 1/64

JMPUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES

CHECKED

MATERIAL:

1/6/2015DATE

SEE COMPONENTPRINTS

SEECOMPONENT

PRINTS

SUPPLIER PRINT ACCEPTANCE: [ ] Accept drawing/specification: No changes needed: [ ] This part is RoHS compliant [ ] This part is REACH compliant [ ] Accept drawing/specification. Notes/Mark-ups added [ ] Cannot accept drawing/spec. Notes/Mark-ups added Supplier Projected Outgoing Quality: SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5 GHZ, 8DBI, NF

PCTEL PROPRIETARY DATA

THIRD ANGLE PROJECTION

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED REPRESENTATIVE OF PCTEL, INC.

DATEDRAWN

FINISH:

FOR TOLERANCES NOT SPECIFIED USE:

SIZE

1:1

DESCRIPTION

DRAWING NO.

SHEET

ODD_BOA24008NFSCALE

B 1 OF 1

PCTEL, INC.471 BRIGHTON DRIVEBLOOMINGDALE, IL 60108PH. 630-372-6800FAX. 630-372-8077

REVISION HISTORYREV DESCRIPTION DATE APPROVED

1 CREATE ODD 06JAN15 JMP

(.530)

ACROSS

FLATS

(.95)

(1.50)

(19.4)

(n.825)

(.750)

(.636)

RADOME

N-FEMALE CONNECTOR

5/8-24 2A THREAD

1

1

2

2

3

3

4

4

A A

B B

C C

D D

SEE COMPONENT

PRINTS

MATERIAL:

APPROVED

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA24008NM

PCTEL, INC.

BROADBAND TECHNOLOGY GROUP

ANTENNA PRODUCTS

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

C

SCALE SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

NA

2011-12-16

SIZE

JMP

DATE

DATE

ANTENNA, OMNI DIRECTIONAL, 2.4-2.5

GHZ, 8 DBI, NM CONNSEE COMPONENT

PRINTSTHE INFORMATION CONTAINED IN THIS

DOCUMENT IS OF A PROPRIETARY NATURE

AND MAY NOT BE USED OR REPRODUCED

WITHOUT THE EXPRESSED WRITTEN PERMISSION

OF PCTEL INC., BLOOMINGDALE, IL 60108

PROPRIETARY DATA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

FOR TOLERANCES NOT SPECIFIED USE:

X.X in .1 in, X.XX in .01 in, X.XXX in .005 in

ANGULAR 1, FRACTIONAL 1/64

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A ODD DRAWING

29 JULY

15

VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

2.4 - 2.5 GHz, 8 dBi

VSWR: 2.4 - 2.5 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

(.825)

(.520)

1.300

(19.180)

(.636)

RADOME DIAMETER

.750

(.250)

(.350)

NM CONNECTOR

PRODUCT LABEL

FIBER CLASS RADOME

CAP

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA51004NF

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL, 5.1-5.9 GHZ, 4

DBI, NF CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A1

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

B ADDED P00522 6 NOV. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

5.1 - 5.9 GHz, 4 dBi

VSWR: 5.1 - 5.9 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(140.53)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA51004NM

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL, 5.1-5.9 GHZ, 4

DBI

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A1

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

5.1 - 5.9 GHz, 4 dBi

VSWR: 5.1 - 5.9 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(

19.05)

(133.86)

(

20.96)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA58010NF

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL,5.8-5.9 GHZ,

10 DBI, NF CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

5.725 - 5.875 GHz, 10 dBi

VSWR: 5.725 - 5.875 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(454.41)

(

20.96)

(

19.05)

A A

B B

1

1

2

2

3

3

4

4

SEE COMPONENT

PRINTS

SEE COMPONENT

PRINTS

MATERIAL:

CHECKED

DRAWN

FINISH:

DATE

ODD-BOA58010NM

PCTEL, INC.

471 BRIGHTON DRIVE

BLOOMINGDALE, IL 60108

PH. 630-372-6800

FAX. 630-372-8077

B

SCALE

SHEET

1 OF 1

DRAWING NO.

DESCRIPTION

1:1

2013-04-17

SIZE

FOR TOLERANCES NOT SPECIFIED USE:

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS JMP

[X.X mm .3 mm]

ANGULAR 1

DATE

[X mm 3 mm]

[ X.XX mm .13 mm]

ANTENNA, OMNI DIRECTIONAL,5.725-5.875

GHZ, 10 DBI, NM CONN

THE INFORMATION AND/OR DRAWINGS CONTAINED IN THIS DOCUMENT IS

CONFIDENTIAL AND PROPRIETARY TO PCTEL, INC. AND MAY NOT BE USED,

REPRODUCED, IN WHOLE OR IN PART, OR MODIFIED IN ANY WAY WITHOUT

THE EXPRESS WRITTEN PERMISSION OF AN AUTHORIZED

REPRESENTATIVE OF PCTEL, INC.

SUPPLIER PRINT ACCEPTANCE:

[ ] Accept drawing/specification:

No changes needed:

[ ] This part is RoHS compliant

[ ] This part is REACH compliant

[ ] Accept drawing/specification.

Notes/Mark-ups added

[ ] Cannot accept drawing/spec.

Notes/Mark-ups added

Supplier Projected Outgoing Quality:

SIGMA LEVEL :_________or PPM:_______

Signature__________________Date:_______

THIRD ANGLE PROJECTION

PCTEL PROPRIETARY DATA

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A

NEW FORMAT FOR DRAWING, PILOT RUN

15 SEP. 15 VH

NOTES:

1. INTERPRET DRAWING PER ANSI/ASME Y14.5

2. MATERIAL: SEE COMPONENTS

3. FINISH: SEE COMPONENTS

4. ELECTRICAL SPECIFICATIONS:

5.725 - 5.875 GHz, 10 dBi

VSWR: 5.725 - 5.875 GHZ, VSWR<1.5:1;

5. ALL MATERIALS SHALL BE ROHS COMPLIANT.

6. SEAL ANTENNA IN INDIVIDUAL PLASTIC BAG. THE BAG SHALL BE

PIERCED WITH A SMALL HOLE TO ALLOW AIR TO ESCAPE SEALED BAG.

7. PACK ANTENNA IN A CARTON SIZED TO PROTECT FROM DAMAGE.

PARTS SHALL BE PACKAGED TO PREVENT DAMAGE IN

SHIPMENT AND HANDLING.

9. A (REF) DIMENSION IS FOR INFORMATION PURPOSES ONLY

AND NO TOLERANCE IS IMPLIED.

PRODUCT LABEL

ANTENNA

(

19.05)

(446.28)

(

20.96)