®

30/40ELECTRIC 24 VOLT6000 / 8000 lbs.(2720 / 3630 kg)PWX

HWX

8.5” H• Entry and exit rollers plus tapered

slidesenhancepalletentryandexit.

• The low step heightmeansfrequententryandexitiseasyandlesstiringfortheoperator.

• HWXlift, lowerandhornbuttonsarelocatedatthecentersofboth thehandrailandsteerhandle.Thehand rail also features ahighspeedtravelbutton.

PWX/HWX...ThefoundationoftheCLARK Powrworker®linecontinuestosetthestandardforruggeddependabilitysinceitsintroductionastheindustry’sfirsthydraulicallypoweredlow-liftin1920.

Highly Maneuverable, Easily Serviceable, Broadly Flexible, Extremely Dependable

Maximum Maneuverability + AC Performance =Ult imate Productivity & Value

The HWX provides a spacious rider platform with a durable dimpled steel surface that secures the operator’s footing.

• Dash display with hour meter, battery discharge indicator and lift interrupt features a plastic lens which is required in many food handling applications.

20 deep

“

Available Equipment

• EEConstruction

• Loadbackrests

• Polyurethanedrivetire

• Variousforksizes

• Back-upalarm

• Batterycompartmentrollers

• Coldstorageprotection

• Corrosionprotection

• Conveniencetray

• “T”styledualloadwheels

PWX/HWX STANDARD FEATURES & BENEFITS

DRIVE UNITn Quiet, Low Maintenance Operation • Spiralbevelgearsareimmersedinanoilbath andsealedinaheavy-dutycase.n Heavy Duty Ball Bearing Able To Endure High Shock

RUGGED FRAME AND FORKS• Frameisfabricatedfromformedsteelplateandbar

steelreinforcementsforoptimumstrengthandrigidity.• Forksalsoincorporateformedsteeltoesplusentryand

exitrollersforimprovedpallethandling.

AC MOTOR/CONTROLn Fully Enclosed • Keepsoutdustandcontaminants. • Wetenvironmentisnotanissue. • Bettersuitedforfoodprocessing.n No Brushes to Change or Commutator to Turn...Ever • Routinebrushchangesareeliminated. • Noneedtopullthemotortoturnandundercut thecommutator. • Muchlesslikelytoburn-outmotorduringastall. (BrusheswerehotspotsonDCmotors)

n 2 Forms of Regenerative Braking • Changeofdirection(Proportionaltoacceleratorposition)

• Throttlerelease(Proportionaltoacceleratorposition)

n Advanced Thermal Protection • Preventsheatdamagetothemotorandcontrol.

HYDRAULIC SYSTEMn Single Assembly System • Theintegralpump,motorandreservoirassembly doesnotrequireabreathercap-eliminatingapotential leaksiteandpointwheredirtcanenterthesystem.

ENCLOSED ELECTROMAGNETIC BRAKES

n Spring Applied/EM Release

• NoMasterCylinder,NoSeals,

NoHydraulicFluids=NoLeaks.

n Double Acting

• Brakesengagewithhandleupordown.

n Automatically Applied

• Parkingbrakeisautomaticallyappliedwhenthe

truckisstoppedandthehandleisreleased.

LIFTING MECHANISM/UNDERCARRIAGEn Pull Rods • Adjustabletomaintainproperforkheightover thelifeoftheunit. •Constructedfromsteelbarstockformaximum strengthanddurability.n Bronze Bushings • Extreme-dutybronzebushingsareusedatlift linkagepivotpoints.n Spring-loaded Stability Casters • Maintainscontactonunevensurfaces.n Elevating Brackets • 3-lugdesignreducebindingandpromoteslonger pinandbushinglife. • Allpivotpointsaregreaseableandfeaturesteel backedbushings.

PALLET ENTRY/EXITn Easy Pallet Access • Entryandexitrollersplustaperedslidesimprove palletentryandexit.

STEER/CONTROL HANDLEn Operator Control • Handlesareavailablewitheithertwistgripor thumboperatedcontrol.n Toggle Switch • Allowstheoperatortochooseloworhighspeed rangebasedontheapplication.n Minimal Steering Effort • LowmountedsteerhandleonthePWXprovides increasedleverage.n Ample Foot Room on Rider Platform • TopmountedhandleonHWX.

GENERAL DATA & STANDARD DIMENSIONSBattery Compartment Dimensions Width(W) Length(L) Height(H) inches inches inches

Small 35.5 7.0 All Large 31.4 13.6 All

Fork Lengths and Pallet Dimensions (in)

A-BottomboardwidthB-MinimumclearanceforwheeldropfromendofpalletC-Palletlength For Single Pallet Handling Fork Length A B C 41.63 6 15 42 47.63 6 15 48 59.63 6 15 60 71.63 6 15 72 95.63 6 15 96

A-BottomboardwidthB-MinimumclearanceforwheeldropfromendofpalletC-PalletlengthD-Doubleloadlength

For Double Pallet Handling Fork Length A B C D

84/93/96 6 15 48 96

For corresponding data see Specification Chart

NotesPerformancemayvary+5%and-10%duetomotorandsystemsefficiencytolerance.Theperformanceshownrepresentsnominalvalueswhichmaybeobtainedundertypicaloperatingconditionswithastandardmachine.

ANSI/ITSDF and Insurance ClassificationStandardtruckmeetsallapplicablemandatoryrequirementsofPartIII-ANSI/ITSDFB56.1SafetyStandardforPoweredIndustrialTrucks(latesteditionat timeofmanufacture)andUnderwritersLaboratoriesrequirementsastofireandelectricalshockhazardonlyfor“E”classification.ForfurtherinformationcontactaClarkrepresentative.

Usersshouldbeawareof,andadhereto,applicablecodesandregulationsregardingoperator training, use, operation and maintenance of powered industrial trucks,including:

• ANSI/ITSDFB56.1• NFPA 505, fire safety standard for powered industrial trucks - type designations,

areasofuse,maintenanceandoperation.• OccupationalSafetyandHealthAdministration(OSHA)regulationsthatmayapply.

Contact your authorizedCLARK forklift truckdealer for further information includingoperator training programs and auxiliary visual and audible warning systems, fireextinguishers,etc.,asavailableforspecificuserapplicationsandrequirements.

Specifications, equipment, technical data, photos and illustrations are based oninformationattimeofprintingandaresubjecttochangewithoutnotice.Someproductsmaybeshownwithoptionalequipment.

A

B

C

A A

B B

C C

D

17

41

13

15

23

PWX30/40

19

18

45 2415 45 44 13

13

1313

40

*

*42inMinimumloadopening widthwith40inload

HWX30/40

17

4123

13

15 *

*42inMinimumloadopening widthwith40inload

19

18

45

40

2415 45 44 13

13

1313

4021

13

13

40

1

2

3

4

5

6

7

8

13

15

17

18

19

21

23

24

25

28

29

34

39

40

41

44

45

46

47

48

49

57

Manufacturer

Model

Load Capacity

Load Center

Power Unit

Operator Type

Tire Type

Wheels (x=driven)

Fork

Overall Dimensions

Handle Height

Step Height

Turning Radius

Head Length

Right Angle Stack Aisle

(Add 6-8” Operating Clearance)

Speeds

Service Weight

Tires

Wheelbase

Ground Clearance

Service Brake

Parking Brake

Steering

Battery

Motors, Controls

Hydraulic Pressure

Gen

eral

Info

rmat

ion

Basi

c D

imen

sion

sPe

rfor

.W

t.Ch

assi

sD

rive

Lin

e

Notes: 1 Forks longer than 54 in. (small compartment) and 48 in. (large compartment) are 9.13 in. wide. 2 Other fork lengths available, see general data. 3 Specifications shown for small/large battery compartment models.

Manufacturer’s Designation

Fork Face Load CG

Electric

Drive/Steer - load

Front/Rear

Lift height to top of fork

Lowered height at heel/toe

Thickness

Width1

Usable length2

Fork tip to load wheel cntr. - lowered

Fork tip to load wheel cntr. - raised

Length to Fork Face3

Overall width, forks

Width3

Height

Ground to tip of released handle

Ground to top of step plate

With 48Lx40W pallet raised3

With 48Lx40W pallet lowered3

Front of frame to center of drive tire

With 48Lx40W pallet raised3

With 48Lx40W pallet lowered3

Travel Speed, Max w/ Load

Travel Speed, Max w/o Load

Including battery3

Number, Front/Rear

Size, Front

Size, Rear

Size, stabilizing casters

With forks lowered3

Minimum without Load

At center of wheelbase

At front of frame

Type

Actuation

Type

Type

Max. capacity (6 hr. rate)3

Weight, minimum3

Weight, maximum3

Drive motor, diameter

Hydraulic motor, diameter

Drive motor control

Speed control

Hydraulic motor control

For lift

Clark

HWX30

6000 (2720)

24 (600)

24 volt

Ride-walk/low lift/pallet

Rubber - Urethane

1x / 2

9.25 (235)

3.50/3.25 (89/83)

2.38 (60)

9.0 (229)

47.63 (1210)

7.17 (182)

11.38 (289)

32.8/38.8 (833/986)

27.0 (686)

36.0/32.0 (914/813)

32.39 (823)

56.7 (1440)

8.5 (216)

68.9/74.9 (1750/1902)

73.3/79.3 (1862/2014)

11.6 (295)

75.9/81.9 (1928/2080)

81.8/87.8 (2078/2230)

6.4 (10.4)

8.4 (13.5)

1800/2039 (816/920)

1 / 2

10.0 x 4.75 x 6.5 (254 x 121 x 165)

3.25 x 5.75 (83 x 146)

4.0 x 2.5 (102 x 64)

61.6/67.6 (1565/1717)

.125 (3)

0.88 (22)

3.5 (89)

Regenerative

Auto-Electro magnetic

Pivot arm

Lead acid

7.7 / 21.5

456/821 (207/373)

575/1461 (261/664)

6.89 (175)

4.5 (114)

Inverter

Solid state

Contactor

2300

lbs(kg)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

mph(kph)

mph(kph)

lbs(kg)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

in(mm)

kwh

lbs(kg)

lbs(kg)

in(mm)

in(mm)

psi

Clark

HWX40

8000 (3630)

24 (600)

24 volt

Ride-walk/low lift/pallet

Rubber - Urethane

1x / 2

9.25 (235)

3.50/3.25 (89/83)

2.38 (60)

9.0 (229)

47.63 (1210)

7.17 (182)

11.38 (289)

32.8/38.8 (833/986)

27.0 (686)

36.0/32.0 (914/813)

32.39 (823)

56.7 (1440)

8.5 (216)

68.9/74.9 (1750/1902)

73.3/79.3 (1862/2014)

11.6 (295)

75.9/81.9 (1928/2080)

81.8/87.8 (2078/2230)

6.1 (9.8)

8.4 (13.5)

1860/2280 (843/1034)

1 / 2

10.0 x 4.75 x 6.5 (254 x 121 x 165)

3.25 x 5.75 (83 x 146)

4.0 x 2.5 (102 x 64)

61.6/67.6 (1565/1717)

.125 (3)

0.88 (22)

3.5 (89)

Regenerative

Auto-Electro magnetic

Pivot arm

Lead acid

7.7 / 21.5

456/821 (207/373)

575/1461 (261/664)

6.89 (175)

4.5 (114)

Inverter

Solid state

Contactor

2300

STANDARD SPECIFICATIONS

Clark

PWX30

6000 (2720)

24 (600)

24 volt

Walk/low lift/pallet

Rubber - Urethane

1x / 2

9.25 (235)

3.50/3.25 (89/83)

2.38 (60)

9.0 (229)

47.63 (1210)

7.17 (182)

11.38 (289)

28.27/34.27 (718/870)

27.0 (686)

36.0/32.0 (914/813)

32.39 (823)

48.0 (1220)

N / A

64.6/70.6 (1641/1793)

69.1/75.1 (1755/1908)

7.14 (181)

69.4/75.4 (1763/1915)

73.2/79.2 (1859/2012)

3.3 (5.3)

4.0 (6.4)

1370/1780 (620/807)

1 / 2

10.0 x 4.75 x 6.5 (254 x 121 x 165)

3.25 x 5.75 (83 x 146)

61.6/67.6 (1565/1717)

.125 (3)

0.88 (22)

3.5 (89)

Regenerative

Auto-Electro magnetic

Pivot arm

Lead acid

7.7 / 21.5

456/821 (207/373)

575/1461 (261/664)

6.10 (155)

4.5 (114)

Inverter

Solid state

Contactor

2300

Clark

PWX40

8000 (3630)

24 (600)

24 volt

Walk/low lift/pallet

Rubber - Urethane

1x / 2

9.25 (235)

3.50/3.25 (89/83)

2.38 (60)

9.0 (229)

47.63 (1210)

7.17 (182)

11.38 (289)

28.27/34.27 (718/870)

27.0 (686)

36.0/32.0 (914/813)

32.39 (823)

48.0 (1220)

N / A

64.6/70.6 (1641/1793)

69.1/75.1 (1755/1908)

7.14 (181)

69.4/75.4 (1763/1915)

73.2/79.2 (1859/2012)

3.1 (4.9)

4.0 (6.4)

1440/1850 (653/839)

1 / 2

10.0 x 4.75 x 6.5 (254 x 121 x 165)

3.25 x 5.75 (83 x 146)

61.6/67.6 (1565/1717)

.125 (3)

0.88 (22)

3.5 (89)

Regenerative

Auto-Electro magnetic

Pivot arm

Lead acid

7.7 / 21.5

456/821 (207/373)

575/1461 (261/664)

6.10 (155)

4.5 (114)

Inverter

Solid state

Contactor

2300

PWX/HWX 30/40

& Don’t Forget...Safety Starts With You!

Before operating a motorized handtruck, an operator must:• Betrainedandauthorized• Readandunderstand operator’smanual• Notoperateafaultyhandtruck• Notrepairahandtruckunless trainedandauthorized• Performdailyinspections

During operation,a motorized hand truck operator must:• Keephandsondesignatedgripsand

feetawayfromhandtruck• Notoperatehandtruckwithwetor

greasyhandsorshoes• Nevercarrypassengersorliftpeople• Keephandtruckawayfrompeople

andobstructions• Travelwithliftmechanismas lowaspossible• Allowsafestoppingdistanceand

cometoacompletestopbeforeleavingtheriderplatform

To park a motorized hand truck,an operator must:• Completelylowerforks• Turnkeyoff

PWX/HWX 30/4059-894-2086 Printed in USA IM10075M

© 2007 CLARK Material Handling Company

CLARK MATERIAL HANDLING COMPANYNorth American Headquarters700 Enterprise Drive • Lexington, KY 40510866-252-5275 • www.clarkmhc.com

• We don’t just build forklifts. As a company, we are also focused on providing our customers with the best possible technical service support and aftermarket parts available.

• Even though our business starts with a quality, cost-e f f e c t i v e p r o d u c t , o u r organization understands that it is the support and services we provide after the sale that help keep your business running at peak efficiency.

• THE CLARK PartsPRO® SYSTEM is our industry-leading electronic parts and service documentation tool that provides dealers with a quick and accurate method of identifying parts for every CLARK forklift built since 1961. PartsPRO® ensures the availability of the most current technical information and has the unique capability to create parts manuals specific to your mixed CLARK fleet, making it simple to positively identify and order the correct part(s) from your local CLARK dealer. The right CLARK part —

The First Time, Every Time.

• U N R I VA L E D PA R T S SUPPORT Our Aftermarket Distribution Center provides par ts to over 250 North American CLARK dealers and many international dealers. This CLARK operated 184,000 square foot facility is dedicated to supporting the CLARK models built over the last 90 years. This facility is focused on providing excellent off-the-shelf availability, quality parts, quick response time and competitive pricing.

DEPENDABLE PARTS = DEPENDABLE TRUCKS

®

To Find Your Nearest Authorized CLARK Dealer, Visit Our Website www.clarkmhc.com